rpms/ruby rawhide starting to fail on OpenSSL related failure

[Jun Aruga (he / him)]

Hello folks in Ruby SIG.

I just want to share that right now rpms/ruby started to fail in
Fedora rawhide after the dependent openssl version was upgraded from
openssl 1:3.1.1-4.fc40 to 1:3.1.4-1.fc40.
https://koschei.fedoraproject.org/package/ruby?collection=f40

```
  1) Failure:
OpenSSL::TestFIPS#test_fips_mode_get_is_true_on_fips_mode_enabled
[/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:12]:
assert_separately failed with error message
pid 93922 exit 1
| /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
`initialize': could not parse pkey (OpenSSL::PKey::DHError)
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
`new'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
`new'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
`class:SSLContext'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
`module:SSL'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
`module:OpenSSL'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
`<top (required)>'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
`require_relative'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
`<top (required)>'
| from -:in `require'
  2) Failure:
OpenSSL::TestFIPS#test_fips_mode_get_with_fips_mode_set
[/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:38]:
assert_separately failed with error message
pid 93924 exit 1
| /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
`initialize': could not parse pkey (OpenSSL::PKey::DHError)
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
`new'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
`new'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
`class:SSLContext'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
`module:SSL'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
`module:OpenSSL'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
`<top (required)>'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
`require_relative'
| from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
`<top (required)>'
| from -:in `require'
```

It seems that we need to apply the following patch that I applied to
CentOS 9 stream and RHEL 9 into Fedora too. I will work on it to pass
the tests on the current rawhide.
https://gitlab.com/redhat/centos-stream/rpms/ruby/-/commit/59242d8ce8261a975...

As a note, we can remove this patch after upgrading Ruby to 3.3.0.

Jun

[Vít Ondruch]

Dne 08. 11. 23 v 18:31 Jun Aruga (he / him) napsal(a):
> Hello folks in Ruby SIG.
>
> I just want to share that right now rpms/ruby started to fail in
> Fedora rawhide after the dependent openssl version was upgraded from
> openssl 1:3.1.1-4.fc40 to 1:3.1.4-1.fc40.
> https://koschei.fedoraproject.org/package/ruby?collection=f40
>    1) Failure:
> OpenSSL::TestFIPS#test_fips_mode_get_is_true_on_fips_mode_enabled
> [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:12]:
> assert_separately failed with error message
> pid 93922 exit 1
> | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> `new'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> `new'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> `<class:SSLContext>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> `<module:SSL>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> `<module:OpenSSL>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> `<top (required)>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> `require_relative'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> `<top (required)>'
> | from -:in `require'
>    2) Failure:
> OpenSSL::TestFIPS#test_fips_mode_get_with_fips_mode_set
> [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:38]:
> assert_separately failed with error message
> pid 93924 exit 1
> | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> `new'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> `new'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> `<class:SSLContext>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> `<module:SSL>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> `<module:OpenSSL>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> `<top (required)>'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> `require_relative'
> | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> `<top (required)>'
> | from -:in `require'
>
> It seems that we need to apply the following patch that I applied to
> CentOS 9 stream and RHEL 9 into Fedora too. I will work on it to pass
> the tests on the current rawhide.
> https://gitlab.com/redhat/centos-stream/rpms/ruby/-/commit/59242d8ce8261a975...

Thx!
> As a note, we can remove this patch after upgrading Ruby to 3.3.0.

BTW could you also please check the patch was backported into upstream 
Ruby 3.2 or older? That way we could eventually drop it from everywhere. 
Thx.

Vít
> Jun

[Jun Aruga (he / him)]

On Thu, Nov 9, 2023 at 10:03 AM Vít Ondruch  wrote:
> Dne 08. 11. 23 v 18:31 Jun Aruga (he / him) napsal(a):
> > Hello folks in Ruby SIG.
> >
> > I just want to share that right now rpms/ruby started to fail in
> > Fedora rawhide after the dependent openssl version was upgraded from
> > openssl 1:3.1.1-4.fc40 to 1:3.1.4-1.fc40.
> > https://koschei.fedoraproject.org/package/ruby?collection=f40
> >    1) Failure:
> > OpenSSL::TestFIPS#test_fips_mode_get_is_true_on_fips_mode_enabled
> > [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:12]:
> > assert_separately failed with error message
> > pid 93922 exit 1
> > | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > `new'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > `new'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> > `<class:SSLContext>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> > `<module:SSL>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> > `<module:OpenSSL>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> > `<top (required)>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > `require_relative'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > `<top (required)>'
> > | from -:in `require'
> >    2) Failure:
> > OpenSSL::TestFIPS#test_fips_mode_get_with_fips_mode_set
> > [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:38]:
> > assert_separately failed with error message
> > pid 93924 exit 1
> > | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > `new'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > `new'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> > `<class:SSLContext>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> > `<module:SSL>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> > `<module:OpenSSL>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> > `<top (required)>'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > `require_relative'
> > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > `<top (required)>'
> > | from -:in `require'
> >
> > It seems that we need to apply the following patch that I applied to
> > CentOS 9 stream and RHEL 9 into Fedora too. I will work on it to pass
> > the tests on the current rawhide.
> > https://gitlab.com/redhat/centos-stream/rpms/ruby/-/commit/59242d8ce8261a975...
>
> Thx!
> > As a note, we can remove this patch after upgrading Ruby to 3.3.0.
>
> BTW could you also please check the patch was backported into upstream
> Ruby 3.2 or older? That way we could eventually drop it from everywhere.
> Thx.

I sent the PR. I need to test it by myself. But please review.
https://src.fedoraproject.org/rpms/ruby/pull-request/163

Yes, the patch is already upstream below.  I expect that the patch is
included in Ruby 3.3.0.
https://github.com/ruby/ruby/commit/b6d7cdc2bad0eadbca73f3486917f0ec7a475814

[Vít Ondruch]

Dne 09. 11. 23 v 16:41 Jun Aruga (he / him) napsal(a):
> On Thu, Nov 9, 2023 at 10:03 AM Vít Ondruch  wrote:
> > Dne 08. 11. 23 v 18:31 Jun Aruga (he / him) napsal(a):
> > > Hello folks in Ruby SIG.
> > >
> > > I just want to share that right now rpms/ruby started to fail in
> > > Fedora rawhide after the dependent openssl version was upgraded from
> > > openssl 1:3.1.1-4.fc40 to 1:3.1.4-1.fc40.
> > > https://koschei.fedoraproject.org/package/ruby?collection=f40
> > >     1) Failure:
> > > OpenSSL::TestFIPS#test_fips_mode_get_is_true_on_fips_mode_enabled
> > > [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:12]:
> > > assert_separately failed with error message
> > > pid 93922 exit 1
> > > | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > `new'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > `new'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> > > `<class:SSLContext>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> > > `<module:SSL>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> > > `<module:OpenSSL>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> > > `<top (required)>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > `require_relative'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > `<top (required)>'
> > > | from -:in `require'
> > >     2) Failure:
> > > OpenSSL::TestFIPS#test_fips_mode_get_with_fips_mode_set
> > > [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:38]:
> > > assert_separately failed with error message
> > > pid 93924 exit 1
> > > | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > `new'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > `new'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> > > `<class:SSLContext>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> > > `<module:SSL>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> > > `<module:OpenSSL>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> > > `<top (required)>'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > `require_relative'
> > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > `<top (required)>'
> > > | from -:in `require'
> > >
> > > It seems that we need to apply the following patch that I applied to
> > > CentOS 9 stream and RHEL 9 into Fedora too. I will work on it to pass
> > > the tests on the current rawhide.
> > > https://gitlab.com/redhat/centos-stream/rpms/ruby/-/commit/59242d8ce8261a975...
> >
> > Thx!
> > > As a note, we can remove this patch after upgrading Ruby to 3.3.0.
> >
> > BTW could you also please check the patch was backported into upstream
> > Ruby 3.2 or older? That way we could eventually drop it from everywhere.
> > Thx.
>
> I sent the PR. I need to test it by myself. But please review.
> https://src.fedoraproject.org/rpms/ruby/pull-request/163
>
> Yes, the patch is already upstream below.  I expect that the patch is
> included in Ruby 3.3.0.
> https://github.com/ruby/ruby/commit/b6d7cdc2bad0eadbca73f3486917f0ec7a475814

But my question was if the patch was backported for Ruby 3.2 and 
possibly older. That would eventually allowed us to remove the Patch 
from Fedora/c9s. Checking the repo [1], it does not seems to be the 
case. Not sure if there is backport request opened somewhere.

Vít

[1] 
https://github.com/ruby/ruby/commits/ruby_3_2/ext/openssl/lib/openssl/ssl.rb

[Jun Aruga (he / him)]

On Thu, Nov 9, 2023 at 5:01 PM Vít Ondruch  wrote:
> Dne 09. 11. 23 v 16:41 Jun Aruga (he / him) napsal(a):
> > On Thu, Nov 9, 2023 at 10:03 AM Vít Ondruch  wrote:
> > > Dne 08. 11. 23 v 18:31 Jun Aruga (he / him) napsal(a):
> > > > Hello folks in Ruby SIG.
> > > >
> > > > I just want to share that right now rpms/ruby started to fail in
> > > > Fedora rawhide after the dependent openssl version was upgraded from
> > > > openssl 1:3.1.1-4.fc40 to 1:3.1.4-1.fc40.
> > > > https://koschei.fedoraproject.org/package/ruby?collection=f40
> > > >     1) Failure:
> > > > OpenSSL::TestFIPS#test_fips_mode_get_is_true_on_fips_mode_enabled
> > > > [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:12]:
> > > > assert_separately failed with error message
> > > > pid 93922 exit 1
> > > > | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > > `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > > `new'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > > `new'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> > > > `<class:SSLContext>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> > > > `<module:SSL>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> > > > `<module:OpenSSL>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> > > > `<top (required)>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > > `require_relative'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > > `<top (required)>'
> > > > | from -:in `require'
> > > >     2) Failure:
> > > > OpenSSL::TestFIPS#test_fips_mode_get_with_fips_mode_set
> > > > [/builddir/build/BUILD/ruby-3.2.2/test/openssl/test_fips.rb:38]:
> > > > assert_separately failed with error message
> > > > pid 93924 exit 1
> > > > | /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > > `initialize': could not parse pkey (OpenSSL::PKey::DHError)
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > > `new'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/pkey.rb:132:in
> > > > `new'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:37:in
> > > > `<class:SSLContext>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:23:in
> > > > `<module:SSL>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:22:in
> > > > `<module:OpenSSL>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl/ssl.rb:21:in
> > > > `<top (required)>'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > > `require_relative'
> > > > | from /builddir/build/BUILD/ruby-3.2.2/redhat-linux-build/.ext/common/openssl.rb:21:in
> > > > `<top (required)>'
> > > > | from -:in `require'
> > > >
> > > > It seems that we need to apply the following patch that I applied to
> > > > CentOS 9 stream and RHEL 9 into Fedora too. I will work on it to pass
> > > > the tests on the current rawhide.
> > > > https://gitlab.com/redhat/centos-stream/rpms/ruby/-/commit/59242d8ce8261a975...
> > >
> > > Thx!
> > > > As a note, we can remove this patch after upgrading Ruby to 3.3.0.
> > >
> > > BTW could you also please check the patch was backported into upstream
> > > Ruby 3.2 or older? That way we could eventually drop it from everywhere.
> > > Thx.
> >
> > I sent the PR. I need to test it by myself. But please review.
> > https://src.fedoraproject.org/rpms/ruby/pull-request/163
> >
> > Yes, the patch is already upstream below.  I expect that the patch is
> > included in Ruby 3.3.0.
> > https://github.com/ruby/ruby/commit/b6d7cdc2bad0eadbca73f3486917f0ec7a475814
>
> But my question was if the patch was backported for Ruby 3.2 and
> possibly older. That would eventually allowed us to remove the Patch
> from Fedora/c9s. Checking the repo [1], it does not seems to be the
> case. Not sure if there is backport request opened somewhere.

Ah, sorry I misunderstood your question. You are right. This patch and
other patches to pass the FIPS tests are not backported to ruby/ruby
ruby_3_2 branches. And there are no backport requests for that right
now.
OK. I will open the backport request ticket in the Ruby project.

[Jun Aruga (he / him)]

The PR was merged. Now Koschei passes.
https://src.fedoraproject.org/rpms/ruby/pull-request/163
> But my question was if the patch was backported for Ruby 3.2 and

possibly older.

I opened the backport request ticket below in the Ruby project.
https://bugs.ruby-lang.org/issues/20000

[Vít Ondruch]

Dne 10. 11. 23 v 16:53 Jun Aruga (he / him) napsal(a):
> The PR was merged. Now Koschei passes.
> https://src.fedoraproject.org/rpms/ruby/pull-request/163
> > But my question was if the patch was backported for Ruby 3.2 and
>
> possibly older.
>
> I opened the backport request ticket below in the Ruby project.
> https://bugs.ruby-lang.org/issues/20000

Thx, and congratulations to the ticket number 20000 🎉🎇😉

Vít