Message
[    0.238635] Linux version 4.11.8-300.fc26.s390x (mockbuild@fedora4.s390.bos.r
edhat.com) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Sun Jul 
2 05:26:33 UTC 2017
[    0.238638] setup: Linux is running natively in 64-bit mode
[    0.238680] setup: The maximum memory size is 51200MB
[    0.238699] numa: NUMA mode: plain
[    0.238738] cpu: 8 configured CPUs, 0 standby CPUs
[    0.238748] cpu: The CPU configuration topology of the machine is: 0 0 4 2 3 
8 / 4
[    0.239148] Write protected kernel read-only data: 10576k
[    0.351566] Zone ranges:
[    0.351571]   DMA      [mem 0x0000000000000000-0x000000007fffffff]
[    0.351573]   Normal   [mem 0x0000000080000000-0x0000000c7fffffff]
[    0.351575] Movable zone start for each node
[    0.351575] Early memory node ranges
[    0.351577]   node   0: [mem 0x0000000000000000-0x0000000c7fffffff]
[    0.351579] Initmem setup node 0 [mem 0x0000000000000000-0x0000000c7fffffff]
[    0.719997] percpu: Embedded 20 pages/cpu @0000000c4d800000 s43776 r8192 d299
52 u81920
[    0.720053] Built 1 zonelists in Node order, mobility grouping on.  Total pag
es: 12902400
[    0.720053] Policy zone: Normal
[    0.720056] Kernel command line: ro ramdisk_size=40000 cio_ignore=all,!condev
 rd.cmdline=ask
[    0.721410] log_buf_len individual max cpu contribution: 4096 bytes
[    0.721411] log_buf_len total cpu_extra contributions: 258048 bytes
[    0.721411] log_buf_len min size: 65536 bytes
[    0.721490] log_buf_len: 524288 bytes
[    0.721491] early log buf free: 62992(96%)
[    0.721497] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.936819] Memory: 51555092K/52428800K available (7020K kernel code, 910K rw
data, 3552K rodata, 620K init, 608K bss, 873708K reserved, 0K cma-reserved)
[    0.936982] SLUB: HWalign=256, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
[    0.937238] Hierarchical RCU implementation.
[    0.937239]  Build-time adjustment of leaf fanout to 64.
[    0.938857] NR_IRQS:3 nr_irqs:3 3
[    0.938910] clocksource: tod: mask: 0xffffffffffffffff max_cycles: 0x3b0a9be8
03b0a9, max_idle_ns: 1805497147909793 ns
[    1.048146] console [ttyS0] enabled
[    1.174049] pid_max: default: 65536 minimum: 512
[    1.174135] Security Framework initialized
[    1.174138] Yama: becoming mindful.
[    1.174142] SELinux:  Initializing.
[    1.176311] Dentry cache hash table entries: 8388608 (order: 14, 67108864 byt
es)
[    1.206014] Inode-cache hash table entries: 4194304 (order: 13, 33554432 byte
s)
[    1.220357] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.220394] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 by
tes)
[    1.221548] ftrace: allocating 22051 entries in 87 pages
[    1.229551] smp: Bringing up secondary CPUs ...
[    1.230301] smp: Brought up 1 node, 8 CPUs
[    1.240561] devtmpfs: initialized
[    1.241873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 19112604462750000 ns
[    1.242017] futex hash table entries: 16384 (order: 10, 4194304 bytes)
[    1.242807] NET: Registered protocol family 16
[    1.243916] HugeTLB registered 1 MB page size, pre-allocated 0 pages
[    1.244304] SCSI subsystem initialized
[    1.245274] NetLabel: Initializing
[    1.245276] NetLabel:  domain hash size = 128
[    1.245277] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.245286] NetLabel:  unlabeled traffic allowed by default
[    1.247866] PCI host bridge to bus 0000:00
[    1.247868] pci_bus 0000:00: root bus resource [mem 0x8000000000000000-0x8000
0000007fffff 64bit pref]
[    1.247870] pci_bus 0000:00: No busn resource found for root bus, will use [b
us 00-ff]
[    1.250750] iommu: Adding device 0000:00:00.0 to group 0, default domain type
 -1
[    1.251407] PCI host bridge to bus 0001:00
[    1.251409] pci_bus 0001:00: root bus resource [mem 0x8001000000000000-0x8001
000007ffffff 64bit pref]
[    1.251411] pci_bus 0001:00: No busn resource found for root bus, will use [b
us 00-ff]
[    1.251862] iommu: Adding device 0001:00:00.0 to group 1, default domain type
 -1
[    1.888137] VFS: Disk quotas dquot_6.6.0
[    1.888164] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.888400] NET: Registered protocol family 2
[    1.888763] TCP established hash table entries: 524288 (order: 10, 4194304 by
tes)
[    1.890702] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.891150] TCP: Hash tables configured (established 524288 bind 65536)
[    1.891266] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.891747] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.892357] NET: Registered protocol family 1
[    1.892402] Unpacking initramfs...
[    2.098976] random: fast init done
[    5.299548] Freeing initrd memory: 35284K
[    5.300925] audit: initializing netlink subsys (disabled)
[    5.300970] audit: type=2000 audit(1502939056.066:1): state=initialized audit
_enabled=0 res=1
[    5.301083] Initialise system trusted keyrings
[    5.301125] workingset: timestamp_bits=42 max_order=24 bucket_order=0
[    5.301763] zbud: loaded
[    5.352741] NET: Registered protocol family 38
[    5.352745] Key type asymmetric registered
[    5.352746] Asymmetric key parser 'x509' registered
[    5.352759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
53)
[    5.352805] io scheduler noop registered
[    5.352807] io scheduler deadline registered
[    5.352832] io scheduler cfq registered (default)
[    5.352833] io scheduler mq-deadline registered
[    5.352950] atomic64_test: passed
[    5.353004] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.353024] hvc_iucv: The z/VM IUCV HVC device driver cannot be used without 
z/VM
[    5.353466] device-mapper: uevent: version 1.0.3
[    5.353509] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-d
evel@redhat.com
[    5.353645] cio: Channel measurement facility initialized using format extend
ed (mode autodetected)
[    5.799850] drop_monitor: Initializing network drop monitor service
[    5.799933] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.800042] Initializing XFRM netlink socket
[    5.800142] NET: Registered protocol family 10
[    5.801623] Segment Routing with IPv6
[    5.801638] mip6: Mobile IPv6
[    5.801640] NET: Registered protocol family 17
[    5.801759] registered taskstats version 1
[    5.801766] Loading compiled-in X.509 certificates
[    5.802867] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha25
6))
[    5.803775] Loaded X.509 cert 'Fedora kernel signing key: f7cf3d45191365bd2d6
5940c483b966a7c26fe8d'
[    5.803798] zswap: loaded using pool lzo/zbud
[    5.804888] Key type big_key registered
[    5.805883] Key type encrypted registered
[    5.806121] Freeing unused kernel memory: 620K
[    5.806127] Write protected read-only-after-init data: 24k
[    5.806130] rodata_test: all tests were successful
[    5.811488] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SEL
INUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +
XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    5.811627] systemd[1]: Detected architecture s390x.
[    5.811629] systemd[1]: Running in initial RAM disk.
[    5.811658] systemd[1]: No hostname configured.
[    5.811661] systemd[1]: Set hostname to .
[    5.811668] systemd[1]: Initializing machine ID from random generator.
[    5.832778] systemd[1]: Listening on udev Control Socket.
[    5.832816] systemd[1]: Reached target Initrd Root Device.
[    5.832833] systemd[1]: Reached target Local File Systems.
[    5.832868] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.841453] audit: type=1130 audit(1502939056.606:2): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="syste
md" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.841924] audit: type=1130 audit(1502939056.606:3): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/
usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.846210] audit: type=1130 audit(1502939056.606:4): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=device_cio_free comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Welcome to [0;34mFedora 26 (Twenty Six) dracut-044-183.fc26 (Initramfs)[0m!
[[0;32m  OK  [0m] Listening on udev Control Socket.
[[0;32m  OK  [0m] Reached target Initrd Root Device.
[[0;32m  OK  [0m] Reached target Local File Systems.
[[0;32m  OK  [0m] Listening on Journal Socket (/dev/log).
[[0;32m  OK  [0m] Created slice System Slice.
[[0;32m  OK  [0m] Reached target Timers.
[[0;32m  OK  [0m] Listening on Journal Socket.
         Starting Free all devices on startup...
         Starting Device-Mapper Multipath Device Controller...
         Starting Apply Kernel Variables...
         Starting Create list of required st  ce nodes for the current kernel...
[[0;32m  OK  [0m] Listening on Journal Audit Socket.
         Starting Journal Service...
         Starting dracut ask for additional cmdline parameters...
[[0;32m  OK  [0m] Reached target Slices.
[[0;32m  OK  [0m] Listening on udev Kernel Socket.
[[0;32m  OK  [0m] Reached target Swap.
[[0;32m  OK  [0m] Started Create list of required sta  vice nodes for the curren
t kernel.
[[0;32m  OK  [0m] Started Device-Mapper Multipath Device Controller.
[[0;32m  OK  [0m] Started Apply Kernel Variables.
         Starting Create Static Device Nodes in /dev...
[[0;32m  OK  [0m] Started Create Static Device Nodes in /dev.
[[0;32m  OK  [0m] Started Journal Service.
[[0;32m  OK  [0m] Started Free all devices on startup.
Enter additional kernel command line parameter (end with ctrl-d or .)
> 
inst.repo=ftp://atsftp:zatsftp@172.16.27.98/zlinux/Fedora26 rd.znet=qeth,0.0.300
00,0.0.3001,0.0.3002,layer2=0,portno=0 ip=172.16.27.52::172.16.27.1:24:fedroce01
1:enccw0.0.3000:none rd.dasd=0.0.7913
> 
.
[   44.327929] audit: type=1130 audit(1502939095.086:5): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe=
"/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[[0;32m  OK  [0m] Started dracut ask for additional cmdline parameters.
         Starting dracut cmdline hook...
[[0;32m  OK  [0m] Started dracut cmdline hook.
         Starting dracut pre-udev hook...
         Starting Open-iSCSI...
[[0;32m  OK  [0m] Started Open-iSCSI.
[   45.733316] audit: type=1130 audit(1502939096.496:6): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/us
r/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.739890] Loading iSCSI transport class v2.0-870.
[   45.741752] audit: type=1130 audit(1502939096.506:7): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/sy
stemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.750112] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   45.756144] iscsi: registered transport (tcp)
[   45.773940] xor: automatically using best checksumming function   xc        
[   45.938974] raid6: vx128x8  gen() 20615 MB/s
[   46.108962] raid6: vx128x8  xor()  6865 MB/s
[   46.108964] raid6: using algorithm vx128x8 gen() 20615 MB/s
[   46.108965] raid6: .... xor() 6865 MB/s, rmw enabled
[   46.108966] raid6: using s390xc recovery algorithm
[   46.111616] alg: No test for crc32be (crc32be-vx)
[   46.128709] device-mapper: multipath round-robin: version 1.2.0 loaded
[   46.148950] RPC: Registered named UNIX socket transport module.
[   46.148952] RPC: Registered udp transport module.
[   46.148954] RPC: Registered tcp transport module.
[   46.148955] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   46.182277] audit: type=1130 audit(1502939096.946:8): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.185485] audit: type=1130 audit(1502939096.946:9): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr
/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.192900] qeth: loading core functions
[   46.195428] dasd-eckd 0.0.7913: A channel path to the device has become opera
tional
[   46.195977] qeth 0.0.3000: Priority Queueing not supported
[   46.198316] dasd-eckd 0.0.7913: New DASD 3390/0C (CU 3990/01) with 30051 cyli
nders, 15 heads, 224 sectors
[   46.199004] dasd-eckd 0.0.7913: DASD with 4 KB/block, 21636720 KB total size,
 48 KB/track, compatible disk layout
[   46.199547] qeth: register layer 3 discipline
[   46.201075]  dasda:VOL1/  0X7913: dasda1 dasda2
[   46.205474] qdio: 0.0.3002 OSA on SC 2d4 using AI:1 QEBSM:0 PRI:1 TDD:1 SIGA:
 W AP
[   46.156643] dracut-pre-udev[528]: rpcbind: /run/rpcbind/rpcbind.lock: No such
 file or directory
[   46.173598] dracut-pre-udev[528]: rpc.idmapd: conf_reinit: open ("(null)", O_
RDONLY) failed
[   46.173709] dracut-pre-udev[528]: rpc.idmapd: conf_reinit: open ("(null)", O_
RDONLY) failed
[[0;32m  OK  [0m] Started dracut pre-udev hook.
         Starting udev Kernel Device Manager...
[[0;32m  OK  [0m] Started udev Kernel Device Manager.
         Starting dracut pre-trigger hook...
[[0;32m  OK  [0m] Started dracut pre-trigger hook.
         Starting udev Coldplug all Devices...
         Mounting Configuration File System...
[[0;32m  OK  [0m] Mounted Configuration File System.
[   46.231852] qeth 0.0.3000: Device is a OSD Express card (level: 076c)
[   46.231852] with link type OSD_1000.
[   46.232043] qeth 0.0.3000 enc3000: renamed from eth0
[   46.233063] qeth 0.0.3000: QDIO data connection isolation is deactivated
[   46.233524] qeth 0.0.3000: Hardware IP fragmentation not supported on enc3000
[   46.234415] qeth 0.0.3000: VLAN enabled
[   46.234857] qeth 0.0.3000: Multicast enabled
[   46.236641] qeth 0.0.3000: IPV6 enabled
[   46.237544] qeth 0.0.3000: Broadcast enabled
[   46.245121] audit: type=1130 audit(1502939097.006:10): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe
="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.265290] audit: type=1130 audit(1502939097.026:11): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" e
xe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.270703] dasdconf.sh Warning: 0.0.7913 is already online, not configuring
[   46.279958] audit: type=1130 audit(1502939097.046:12): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.281723] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[   46.281736] mlx4_core: Initializing 0000:00:00.0
[   46.281806] mlx4_core 0000:00:00.0: enabling device (0000 -> 0002)
[   46.282862] mlx4_core 0000:00:00.0: Detected virtual function - running in sl
ave mode
[   46.282898] mlx4_core 0000:00:00.0: Sending reset
[   46.284574] mlx4_core 0000:00:00.0: Sending vhcr0
[   46.290312] mlx4_core 0000:00:00.0: Requested number of MACs is too much for 
port 1, reducing to 64
[   46.290318] mlx4_core 0000:00:00.0: Requested number of VLANs is too much for
 port 1, reducing to 1
[   46.290532] mlx4_core 0000:00:00.0: HCA minimum page size:512
[   46.291953] mlx4_core 0000:00:00.0: Timestamping is not supported in slave mo
de
[[0;32m  OK  [0m] Started udev Coldplug all Devices.
         Starting dracut initqueue hook...
         Starting Show Plymouth Boot Screen...
[   46.417198] pps_core: LinuxPPS API ver. 1 registered
[   46.417203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti 
[   46.419463] PTP clock support registered
[   46.421146]  mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driv
er v2.2-1 (Feb 2014)
[   46.422274]  mlx4_ib_add: counter index 255 for port 1 allocated 1
[   46.422381]  mlx4_ib_add: counter index 255 for port 2 allocated 1
[   46.428974] random: crng init done
[   46.435170] mlx4_core 0000:00:00.0: mlx4_ib: multi-function enabled
[   46.435172] mlx4_core 0000:00:00.0: mlx4_ib: operating in qp1 tunnel mode
[   46.435194] mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
[   46.435645] mlx4_en 0000:00:00.0: Activating port:1
[   46.492788] mlx4_en: 0000:00:00.0: Port 1: Using 64 TX rings
[   46.492790] mlx4_en: 0000:00:00.0: Port 1: Using 8 RX rings
[   46.492792] mlx4_en: 0000:00:00.0: Port 1:   frag:0 - size:1522 prefix:0 stri
de:1536
[   46.493178] mlx4_en: 0000:00:00.0: Port 1: Initializing port
[   46.493858] mlx4_en 0000:00:00.0: Activating port:2
[   46.556685] mlx4_en: 0000:00:00.0: Port 2: Using 64 TX rings
[   46.556687] mlx4_en: 0000:00:00.0: Port 2: Using 8 RX rings
[   46.556689] mlx4_en: 0000:00:00.0: Port 2:   frag:0 - size:1522 prefix:0 stri
de:1536
[   46.557069] mlx4_en: 0000:00:00.0: Port 2: Initializing port
[   46.560490] mlx4_core 0000:00:00.0 ens16: renamed from eth0
[   46.609087] mlx4_core 0000:00:00.0 ens16d1: renamed from eth1
[  230.197023] audit: type=1130 audit(1502939280.956:13): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  230.197030] audit: type=1131 audit(1502939280.956:14): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Warning: /dev/root does not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.
dracut:/#