Message
[    0.172009] Linux version 4.11.8-300.fc26.s390x (mockbuild@fedora4.s390.bos.r
edhat.com) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Sun Jul 
2 05:26:33 UTC 2017
[    0.172013] setup: Linux is running natively in 64-bit mode
[    0.172055] setup: The maximum memory size is 51200MB
[    0.172073] numa: NUMA mode: plain
[    0.172112] cpu: 8 configured CPUs, 0 standby CPUs
[    0.172122] cpu: The CPU configuration topology of the machine is: 0 0 4 2 3 
8 / 4
[    0.172523] Write protected kernel read-only data: 10576k
[    0.285081] Zone ranges:
[    0.285087]   DMA      [mem 0x0000000000000000-0x000000007fffffff]
[    0.285088]   Normal   [mem 0x0000000080000000-0x0000000c7fffffff]
[    0.285090] Movable zone start for each node
[    0.285091] Early memory node ranges
[    0.285092]   node   0: [mem 0x0000000000000000-0x0000000c7fffffff]
[    0.285094] Initmem setup node 0 [mem 0x0000000000000000-0x0000000c7fffffff]
[    0.660800] percpu: Embedded 20 pages/cpu @0000000c4d800000 s43776 r8192 d299
52 u81920
[    0.660857] Built 1 zonelists in Node order, mobility grouping on.  Total pag
es: 12902400
[    0.660858] Policy zone: Normal
[    0.660861] Kernel command line: ro ramdisk_size=40000 cio_ignore=all,!condev
 rd.cmdline=ask
[    0.662229] log_buf_len individual max cpu contribution: 4096 bytes
[    0.662230] log_buf_len total cpu_extra contributions: 258048 bytes
[    0.662231] log_buf_len min size: 65536 bytes
[    0.662310] log_buf_len: 524288 bytes
[    0.662311] early log buf free: 62992(96%)
[    0.662317] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.879637] Memory: 51555092K/52428800K available (7020K kernel code, 910K rw
data, 3552K rodata, 620K init, 608K bss, 873708K reserved, 0K cma-reserved)
[    0.879801] SLUB: HWalign=256, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
[    0.880068] Hierarchical RCU implementation.
[    0.880069]  Build-time adjustment of leaf fanout to 64.
[    0.881709] NR_IRQS:3 nr_irqs:3 3
[    0.881762] clocksource: tod: mask: 0xffffffffffffffff max_cycles: 0x3b0a9be8
03b0a9, max_idle_ns: 1805497147909793 ns
[    0.988328] console [ttyS0] enabled
[    1.083641] pid_max: default: 65536 minimum: 512
[    1.083728] Security Framework initialized
[    1.083731] Yama: becoming mindful.
[    1.083736] SELinux:  Initializing.
[    1.085905] Dentry cache hash table entries: 8388608 (order: 14, 67108864 byt
es)
[    1.115627] Inode-cache hash table entries: 4194304 (order: 13, 33554432 byte
s)
[    1.129965] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.130001] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 by
tes)
[    1.131171] ftrace: allocating 22051 entries in 87 pages
[    1.139138] smp: Bringing up secondary CPUs ...
[    1.139883] smp: Brought up 1 node, 8 CPUs
[    1.150638] devtmpfs: initialized
[    1.151936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 19112604462750000 ns
[    1.152080] futex hash table entries: 16384 (order: 10, 4194304 bytes)
[    1.152859] NET: Registered protocol family 16
[    1.153922] HugeTLB registered 1 MB page size, pre-allocated 0 pages
[    1.154306] SCSI subsystem initialized
[    1.155297] NetLabel: Initializing
[    1.155299] NetLabel:  domain hash size = 128
[    1.155300] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.155309] NetLabel:  unlabeled traffic allowed by default
[    1.157890] PCI host bridge to bus 0000:00
[    1.157893] pci_bus 0000:00: root bus resource [mem 0x8000000000000000-0x8000
0000007fffff 64bit pref]
[    1.157895] pci_bus 0000:00: No busn resource found for root bus, will use [b
us 00-ff]
[    1.160747] iommu: Adding device 0000:00:00.0 to group 0, default domain type
 -1
[    1.161402] PCI host bridge to bus 0001:00
[    1.161404] pci_bus 0001:00: root bus resource [mem 0x8001000000000000-0x8001
000007ffffff 64bit pref]
[    1.161421] pci_bus 0001:00: No busn resource found for root bus, will use [b
us 00-ff]
[    1.161878] iommu: Adding device 0001:00:00.0 to group 1, default domain type
 -1
[    1.804053] VFS: Disk quotas dquot_6.6.0
[    1.804081] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.804313] NET: Registered protocol family 2
[    1.804675] TCP established hash table entries: 524288 (order: 10, 4194304 by
tes)
[    1.806578] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.807026] TCP: Hash tables configured (established 524288 bind 65536)
[    1.807144] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.807625] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[    1.808206] NET: Registered protocol family 1
[    1.808251] Unpacking initramfs...
[    1.981820] random: fast init done
[    5.213896] Freeing initrd memory: 35284K
[    5.215342] audit: initializing netlink subsys (disabled)
[    5.215415] audit: type=2000 audit(1503025373.121:1): state=initialized audit
_enabled=0 res=1
[    5.215537] Initialise system trusted keyrings
[    5.215575] workingset: timestamp_bits=42 max_order=24 bucket_order=0
[    5.216219] zbud: loaded
[    5.267219] NET: Registered protocol family 38
[    5.267222] Key type asymmetric registered
[    5.267224] Asymmetric key parser 'x509' registered
[    5.267236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
53)
[    5.267285] io scheduler noop registered
[    5.267287] io scheduler deadline registered
[    5.267312] io scheduler cfq registered (default)
[    5.267313] io scheduler mq-deadline registered
[    5.267430] atomic64_test: passed
[    5.267484] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.267505] hvc_iucv: The z/VM IUCV HVC device driver cannot be used without 
z/VM
[    5.267959] device-mapper: uevent: version 1.0.3
[    5.268001] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-d
evel@redhat.com
[    5.268122] cio: Channel measurement facility initialized using format extend
ed (mode autodetected)
[    5.756936] drop_monitor: Initializing network drop monitor service
[    5.757020] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.757124] Initializing XFRM netlink socket
[    5.757235] NET: Registered protocol family 10
[    5.758715] Segment Routing with IPv6
[    5.758727] mip6: Mobile IPv6
[    5.758728] NET: Registered protocol family 17
[    5.758822] registered taskstats version 1
[    5.758830] Loading compiled-in X.509 certificates
[    5.759791] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha25
6))
[    5.760697] Loaded X.509 cert 'Fedora kernel signing key: f7cf3d45191365bd2d6
5940c483b966a7c26fe8d'
[    5.760726] zswap: loaded using pool lzo/zbud
[    5.761790] Key type big_key registered
[    5.762827] Key type encrypted registered
[    5.763087] Freeing unused kernel memory: 620K
[    5.763094] Write protected read-only-after-init data: 24k
[    5.763097] rodata_test: all tests were successful
[    5.768789] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SEL
INUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +
XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    5.768936] systemd[1]: Detected architecture s390x.
[    5.768938] systemd[1]: Running in initial RAM disk.
[    5.768968] systemd[1]: No hostname configured.
[    5.768971] systemd[1]: Set hostname to .
[    5.768979] systemd[1]: Initializing machine ID from random generator.
[    5.789334] systemd[1]: Listening on Journal Socket (/dev/log).
Welcome to [0;34mFedora 26 (Twenty Six) dracut-044-183.fc26 (Initramfs)[0m!
[[0;32m  OK  [0m] Listening on Journal Socket (/dev/log).
[[0;32m  OK  [0m] Listening on udev Control Socket.
[[0;32m  OK  [0m] Listening on Journal Audit Socket.
[[0;32m  OK  [0m] Reached target Timers.
[[0;32m  OK  [0m] Created slice System Slice.
[[0;32m  OK  [0m] Listening on udev Kernel Socket.
[[0;32m  OK  [0m] Reached target Local File Systems.
[[0;32m  OK  [0m] Reached target Swap.
[[0;32m  OK  [0m] Listening on Journal Socket.
         Starting Device-Mapper Multipath Device Controller...
         Starting Free all devices on startup...
         Starting Journal Service...
         Starting dracut ask for additional cmdline parameters...
         Starting Create list of required st  ce nodes for the current kernel...
[[0;32m  OK  [0m] Reached target Slices.
[[0;32m  OK  [0m] Reached target Initrd Root Device.
         Starting Apply Kernel Variables...
[[0;32m  OK  [0m] Started Create list of required sta  vice nodes for the curren
t kernel.
[[0;32m  OK  [0m] Started Device-Mapper Multipath Device Controller.
         Starting Create Static Device Nodes in /dev...
[[0;32m  OK  [0m] Started Apply Kernel Variables.
[[0;32m  OK  [0m] Started Create Static Device Nodes in /dev.
[[0;32m  OK  [0m] Started Journal Service.
[[0;32m  OK  [0m] Started Free all devices on startup.
[    5.789382] systemd[1]: Listening on udev Control Socket.
[    5.789426] systemd[1]: Listening on Journal Audit Socket.
[    5.789442] systemd[1]: Reached target Timers.
[    5.795252] audit: type=1130 audit(1503025373.701:2): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/us
r/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.798284] audit: type=1130 audit(1503025373.701:3): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="syste
md" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.798352] audit: type=1130 audit(1503025373.701:4): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/
usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.802628] audit: type=1130 audit(1503025373.711:5): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=device_cio_free comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Enter additional kernel command line parameter (end with ctrl-d or .)
> 
inst.repo=ftp://atsftp:zatsftp@172.16.27.98/zlinux/Fedora26 rd.znet=qeth,0.0.300
00,0.0.3001,0.0.3002,layer2=0,portno=0 ip=172.16.27.52::172.16.27.1:24:fedroce01
1:enc3000:none rd.dasd=0.0.7913
> 
.
[   78.189757] audit: type=1130 audit(1503025446.091:6): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe=
"/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[[0;32m  OK  [0m] Started dracut ask for additional cmdline parameters.
         Starting dracut cmdline hook...
[[0;32m  OK  [0m] Started dracut cmdline hook.
         Starting dracut pre-udev hook...
         Starting Open-iSCSI...
[[0;32m  OK  [0m] Started Open-iSCSI.
[   79.590621] audit: type=1130 audit(1503025447.491:7): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/us
r/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.596346] Loading iSCSI transport class v2.0-870.
[   79.596644] audit: type=1130 audit(1503025447.501:8): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/sy
stemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.605924] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   79.611943] iscsi: registered transport (tcp)
[   79.628978] xor: automatically using best checksumming function   xc        
[   79.691856] random: crng init done
[   79.801797] raid6: vx128x8  gen() 20756 MB/s
[   79.971836] raid6: vx128x8  xor()  2422 MB/s
[   79.971838] raid6: using algorithm vx128x8 gen() 20756 MB/s
[   79.971839] raid6: .... xor() 2422 MB/s, rmw enabled
[   79.971840] raid6: using s390xc recovery algorithm
[   79.974458] alg: No test for crc32be (crc32be-vx)
[   79.991225] device-mapper: multipath round-robin: version 1.2.0 loaded
[   80.011387] RPC: Registered named UNIX socket transport module.
[   80.011389] RPC: Registered udp transport module.
[   80.011390] RPC: Registered tcp transport module.
[   80.011391] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   80.045179] audit: type=1130 audit(1503025447.951:9): pid=1 uid=0 auid=429496
7295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.048551] audit: type=1130 audit(1503025447.951:10): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/us
r/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.056282] qeth: loading core functions
[   80.059433] qeth 0.0.3000: Priority Queueing not supported
[   80.061325] dasd-eckd 0.0.7913: A channel path to the device has become opera
tional
[   80.063109] qeth: register layer 3 discipline
[   80.063814] dasd-eckd 0.0.7913: New DASD 3390/0C (CU 3990/01) with 30051 cyli
nders, 15 heads, 224 sectors
[   80.064502] dasd-eckd 0.0.7913: DASD with 4 KB/block, 21636720 KB total size,
 48 KB/track, compatible disk layout
[   80.066457]  dasda:VOL1/  0X7913: dasda1 dasda2
[   80.068900] qdio: 0.0.3002 OSA on SC 2d4 using AI:1 QEBSM:0 PRI:1 TDD:1 SIGA:
 W AP
[   80.018947] dracut-pre-udev[525]: rpcbind: /run/rpcbind/rpcbind.lock: No such
 file or directory
[   80.036469] dracut-pre-udev[525]: rpc.idmapd: conf_reinit: open ("(null)", O_
RDONLY) failed
[   80.036544] dracut-pre-udev[525]: rpc.idmapd: conf_reinit: open ("(null)", O_
RDONLY) failed
[[0;32m  OK  [0m] Started dracut pre-udev hook.
         Starting udev Kernel Device Manager...
[[0;32m  OK  [0m] Started udev Kernel Device Manager.
         Starting dracut pre-trigger hook...
[[0;32m  OK  [0m] Started dracut pre-trigger hook.
         Starting udev Coldplug all Devices...
         Mounting Configuration File System...
[[0;32m  OK  [0m] Mounted Configuration File System.
[   80.094856] qeth 0.0.3000: Device is a OSD Express card (level: 076c)
[   80.094856] with link type OSD_1000.
[   80.095018] qeth 0.0.3000 enc3000: renamed from eth0
[   80.096066] qeth 0.0.3000: QDIO data connection isolation is deactivated
[   80.096537] qeth 0.0.3000: Hardware IP fragmentation not supported on enc3000
[   80.097429] qeth 0.0.3000: VLAN enabled
[   80.097874] qeth 0.0.3000: Multicast enabled
[   80.099667] qeth 0.0.3000: IPV6 enabled
[   80.100579] qeth 0.0.3000: Broadcast enabled
[   80.111609] audit: type=1130 audit(1503025448.011:11): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe
="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.133033] audit: type=1130 audit(1503025448.041:12): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" e
xe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.135092] dasdconf.sh Warning: 0.0.7913 is already online, not configuring
[   80.146276] audit: type=1130 audit(1503025448.051:13): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.147077] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[   80.147091] mlx4_core: Initializing 0000:00:00.0
[   80.147171] mlx4_core 0000:00:00.0: enabling device (0000 -> 0002)
[   80.148236] mlx4_core 0000:00:00.0: Detected virtual function - running in sl
ave mode
[   80.148270] mlx4_core 0000:00:00.0: Sending reset
[[0;32m  OK  [0m] Started udev Coldplug all Devices.
         Starting Show Plymouth Boot Screen...
         Starting dracut initqueue hook...
[   80.149549] mlx4_core 0000:00:00.0: Sending vhcr0
[   80.155047] mlx4_core 0000:00:00.0: Requested number of MACs is too much for 
port 1, reducing to 64
[   80.155050] mlx4_core 0000:00:00.0: Requested number of VLANs is too much for
 port 1, reducing to 1
[   80.155256] mlx4_core 0000:00:00.0: HCA minimum page size:512
[   80.156615] mlx4_core 0000:00:00.0: Timestamping is not supported in slave mo
de
[   80.282130] pps_core: LinuxPPS API ver. 1 registered
[   80.282132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti 
[   80.283667] PTP clock support registered
[   80.286013]  mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driv
er v2.2-1 (Feb 2014)
[   80.287166]  mlx4_ib_add: counter index 255 for port 1 allocated 1
[   80.287279]  mlx4_ib_add: counter index 255 for port 2 allocated 1
[   80.299754] mlx4_core 0000:00:00.0: mlx4_ib: multi-function enabled
[   80.299756] mlx4_core 0000:00:00.0: mlx4_ib: operating in qp1 tunnel mode
[   80.299775] mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
[   80.300245] mlx4_en 0000:00:00.0: Activating port:1
[   80.365370] mlx4_en: 0000:00:00.0: Port 1: Using 64 TX rings
[   80.365372] mlx4_en: 0000:00:00.0: Port 1: Using 8 RX rings
[   80.365374] mlx4_en: 0000:00:00.0: Port 1:   frag:0 - size:1522 prefix:0 stri
de:1536
[   80.365834] mlx4_en: 0000:00:00.0: Port 1: Initializing port
[   80.366508] mlx4_en 0000:00:00.0: Activating port:2
[   80.426693] mlx4_en: 0000:00:00.0: Port 2: Using 64 TX rings
[   80.426695] mlx4_en: 0000:00:00.0: Port 2: Using 8 RX rings
[   80.426697] mlx4_en: 0000:00:00.0: Port 2:   frag:0 - size:1522 prefix:0 stri
de:1536
[   80.427105] mlx4_en: 0000:00:00.0: Port 2: Initializing port
[   80.430330] mlx4_core 0000:00:00.0 ens16d1: renamed from eth1
[   80.461964] mlx4_core 0000:00:00.0 ens16: renamed from eth0
[   90.987306] loop: module loaded
[   91.289418] audit: type=1130 audit(1503025459.191:14): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="
/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   91.298599] audit: type=1130 audit(1503025459.201:15): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="
/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   91.335513] audit: type=1130 audit(1503025459.241:16): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="
/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   91.335517] audit: type=1131 audit(1503025459.241:17): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="
/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   91.349153] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
(null)
[   91.373863] audit: type=1130 audit(1503025459.281:18): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-mount comm="systemd" exe="/usr
/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.094515] audit: type=1130 audit(1503025460.001:19): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="
/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.098652] audit: type=1131 audit(1503025460.001:20): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="
/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.099015] audit: type=1130 audit(1503025460.001:21): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=device_cio_free comm="systemd" exe="/
usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.099018] audit: type=1131 audit(1503025460.001:22): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=device_cio_free comm="systemd" exe="/
usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.099196] audit: type=1130 audit(1503025460.001:23): pid=1 uid=0 auid=42949
67295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/u
sr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   92.156490] systemd-journald[190]: Received SIGTERM from PID 1 (systemd).
[   92.188981] systemd: 19 output lines suppressed due to ratelimiting
[   92.668475] SELinux:  Class sctp_socket not defined in policy.
[   92.668477] SELinux:  Class icmp_socket not defined in policy.
[   92.668479] SELinux:  Class ax25_socket not defined in policy.
[   92.668480] SELinux:  Class ipx_socket not defined in policy.
[   92.668481] SELinux:  Class netrom_socket not defined in policy.
[   92.668482] SELinux:  Class atmpvc_socket not defined in policy.
[   92.668483] SELinux:  Class x25_socket not defined in policy.
[   92.668484] SELinux:  Class rose_socket not defined in policy.
[   92.668485] SELinux:  Class decnet_socket not defined in policy.
[   92.668486] SELinux:  Class atmsvc_socket not defined in policy.
[   92.668487] SELinux:  Class rds_socket not defined in policy.
[   92.668488] SELinux:  Class irda_socket not defined in policy.
[   92.668489] SELinux:  Class pppox_socket not defined in policy.
[   92.668489] SELinux:  Class llc_socket not defined in policy.
[   92.668490] SELinux:  Class can_socket not defined in policy.
[   92.668491] SELinux:  Class tipc_socket not defined in policy.
[   92.668492] SELinux:  Class bluetooth_socket not defined in policy.
[   92.668493] SELinux:  Class iucv_socket not defined in policy.
[   92.668494] SELinux:  Class rxrpc_socket not defined in policy.
[   92.668495] SELinux:  Class isdn_socket not defined in policy.
[   92.668496] SELinux:  Class phonet_socket not defined in policy.
[   92.668497] SELinux:  Class ieee802154_socket not defined in policy.
[   92.668498] SELinux:  Class caif_socket not defined in policy.
[   92.668499] SELinux:  Class alg_socket not defined in policy.
[   92.668500] SELinux:  Class nfc_socket not defined in policy.
[   92.668500] SELinux:  Class vsock_socket not defined in policy.
[   92.668501] SELinux:  Class kcm_socket not defined in policy.
[   92.668521] SELinux:  Class qipcrtr_socket not defined in policy.
[   92.668522] SELinux:  Class smc_socket not defined in policy.
[   92.668523] SELinux: the above unknown classes and permissions will be allowe
d
[   92.730122] systemd[1]: Successfully loaded SELinux policy in 165.114ms.
[   92.758071] systemd[1]: Relabelled /dev and /run in 6.606ms.
[  100.825340] anaconda[1908]: Starting installer, one moment...
[  100.825639] anaconda[1908]: 03:04:28 Please ssh install@fedroce01 (172.16.27.
52) to begin the install.