Re: Secandary architecture proposal ... parisc

[Jan Chadima]

----- "Dennis Gilmore"  wrote:
> On Tuesday 31 March 2009 12:54:29 pm Jan Chadima wrote:
> > ----- "Mike McGrath"  wrote:
> > > On Mon, 30 Mar 2009, Jan Chadima wrote:
> > > > Hello
> > > > we want to make secondary fedora architecture on HP parisc. We
>
> have
> > > built some rpms on an old hp workstation now. We try to port the
> > > architecture dependent ones. We plan to be able boot from cd in
>
> an
> > > month or two. The project page is
>
> http://www.benhur.prf.cuni.cz/medved-7/wydobitki/?path=fedora-parisc
> > > > . We want to invite another developers to contribute.
> > > >
> > > > Now we are only two, we want to organize a Fedora SIG and if
> > >
> > > possible Fedora secondary architecture.
> > > > Could you please point me to some information how to do it or
> > >
> > > document how to do it?
> > > > Thanx in advance
> > > > Jan F. Chadima
> > > > Ales Snuparek
> > >
> > > Your best bet on secondary arch discussions is on the secondary
>
> arch
> > > list.
> > > Take a look at:
>
> https://admin.fedoraproject.org/mailman/listinfo/fedora-secondary-list
> > > -Mike
>
> hi Jan,

Hello Denis we are not able to put the hub on the internet at the moment, we make some preparations in month or two and then we write you again. We have only one weak, but heavy computer in my flat in 3th floor and actually we develop from console. We have rpm working, but koji not yet. Now we have the goal to be able boot fedora by its own power (now we use many handmade helpers). When we will be able to boot, we will search the Internet for it. We are trying to get another computer.

JFCh
> Welcome to fedora :)   please read through 
> https://fedoraproject.org/wiki/Architectures   and add a parisc arch
> page  
> with the info for you and your team.  if you have not setup a arch
> tracker bug 
> in bugzilla, please do.
>
> Right now the documenatation for getting everything up and running is
> pretty 
> scattered.  I need to sit down and write it up in the wiki.  you will
> need 
> koji 1.3.1 and rpm 4.6.0 on your builders and hub.  We do require that
> the hub 
> be publically accessible.  we will setup dns for you 
> parisc,koji.fedoraproject.org  and ill add to fedora-packager-setup to
> write 
> out koji configs for parisc.
>
> Do you have any specific questions right now?
>
> Dennis
>
> secondary mailing list
> [e-mail]
> https://admin.fedoraproject.org/mailman/listinfo/secondary