selinux May 2017

selinux@lists.fedoraproject.org

11 participants
11 discussions

Initial context for init
by Philip Seeley 02 Aug '19

02 Aug '19

Hi all, Quick question is: In the targeted policy should init run SystemHigh as it does in the mls policy? The background: We're setting up a targeted system where we confine all users and remove the unconfined policy module, but we also enable polyinstantiation of /tmp and /var/tmp. If we ssh in as a staff_u user phil and elevate to root/sysadm_r then we have a context of: staff_u:sysadm_r:sysadm_t:s0-s0:c0.c1023 And therefore /var/tmp is: drwxrwxrwt. root root system_u:object_r:tmp_t:s0-s0:c0.c1023 /var/tmp Which is really: drwxrwxrwt. root root system_u:object_r:tmp_t:s0-s0:c0.c1023 /var/tmp-inst/system_u:object_r:tmp_t:s0-s0:c0.c1023_phil The real /var/tmp is: drwxrwxrwt. root root system_u:object_r:tmp_t:s0 /var/tmp Now if we use run_init to update an RPM that contains a post install script, rpm can't create the temporary script file: # run_init bash -c 'rpm -i --force /root/libselinux-2.0.94-7.el6.x86_64.rpm' Authenticating phil. Password: error: error creating temporary file /var/tmp/rpm-tmp.atkHTf: Permission denied error: Couldn't create temporary file for %post (libselinux-2.0.94-7.el6.x86_64): Permission denied Note: you need to use run_init as the rpm might restart a service, e.g. the sssd rpm. We've traced this to the /etc/selinux/targeted/contexts/initrc_context file which contains: system_u:system_r:initrc_t:s0 So we transition to initrc_t and then to rpm_t without any categories, but because the polyinstantiated /var/tmp directory has c0.c1023 we get denied. Normally in targeted init runs unconfined, but we've removed this. type=AVC msg=audit(1467342325.016:716): avc: denied { read } for pid=2779 comm="rpm" name="system_u:object_r:tmp_t:s0-s0:c0.c1023_phil" dev=dm-0 ino=1966082 scontext=system_u:system_r:rpm_t:s0 tcontext=system_u:object_r:tmp_t:s0-s0:c0.c1023 tclass=dir It works if we change initrc_context to: system_u:system_r:initrc_t:s0-s0:c0.c1023 We don't see the issue under mls because the default initrc_context is: system_u:system_r:initrc_t:s0-s15:c0.c1023 We've traces this back through the selinux-policy src RPM and to the upstream refpolicy and see that config/appconfig-mcs/initrc_context is: system_u:system_r:initrc_t:s0 whereas config/appconfig-mls/initrc_context is: system_u:system_r:initrc_t:s0-mls_systemhigh So under mls init's context is SystemHigh, but under mcs/targeted it doesn't have any categories. So the long question is should config/appconfig-mcs/initrc_context really be: system_u:system_r:initrc_t:mcs_systemhigh as it seems odd that the more secure mls policy would run init at SystemHigh but targeted doesn't. Thanks Phil Seeley

3 3

Re: Controlling execution of Java JAR files with SELinux RBAC
by Philip Seeley 31 May '17

31 May '17

Hi Bill, My understanding was that the "user" range was the possible range and the "login" range was what was allowed for a user. I think this is actually wrong, as in CentOS6/RHEL6 you seem to be restricted to the context you login with and get a "process.transition" denial if a user_t tries to change their context, e.g. with runcon: [jack@centos6 ~]$ runcon -l s0:c1 bash runcon: bash: Permission denied This doesn't seem to be the case for later versions, specifically Fedora 25 that I've tried with. In this case you seem to need different SELinux users: [root@laptop ~]# semanage user -a -R user_r -r s0:c0 jack_u [root@laptop ~]# semanage user -a -R user_r -r s0:c1 mary_u [root@laptop ~]# semanage login -a -s jack_u -r s0:c0 jack [root@laptop ~]# semanage login -a -s mary_u -r s0:c1 mary Then you can't change the context due to it being invalid: [jack@centos6 ~]$ id uid=500(jack) gid=500(jack) groups=500(jack) context=jack_u:user_r:user_t:s0:c0 [jack@centos6 ~]$ runcon -l s0:c1 bash runcon: invalid context: jack_u:user_r:user_t:s0:c1: Invalid argument This latter approach worked for me on all versions of the OS and I would say is the more correct approach. Hope that helps. Phil From: Bill D <littus(a)icloud.com> To: Philip Seeley <pseeley(a)au1.ibm.com> Cc: littus(a)icloud.com, selinux(a)lists.fedoraproject.org Date: 31/05/2017 09:50 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC Hello Phil: Thank you for the information and the explanation of the "+" option--it makes sense. I have one concern... Notice that initially user_u's MCS settings is s0 which I believe it is the lowest category. But in order to set up new categories for constraining access to JAR files, we must change user_u's MCS settings to s0-s0:c0.c1023 with the following command: # semanage user -m -r s0-s0:c0.c1023 user_u Doesn't it mean that we are elevating user_u's category privileges? Is it possible to attain the desired effect without having to elevate user_u's category privileges? Thank you & Best Regards, Bill On 05/29/2017 08:27 PM, Philip Seeley wrote: Hi Bill, Good news. The "+" will add to any existing categories already given to the login, which in your initial case was SystemLow-SystemHigh, so had no effect. If it was initially SystemLow then it would have done the desired thing. For platforms newer than CentOS6/RHEL6, then you can make the user_t domain MCS constrained with: [root@laptop ~]# cat mcsconstrainedusers.te policy_module(mcsconstrainedusers, 1.0.0) gen_require(` type user_t; ') mcs_constrained(user_t); Compiling this under Fedora 25 gave a bunch of warnings, but the module installed OK and gave the desired effect. I've not had time to look into the warnings, sorry. [root@laptop ~]# make -f /usr/share/selinux/devel/Makefile /usr/share/selinux/devel/include/contrib/container.if:14: Error: duplicate definition of container_runtime_domtrans(). Original definition on 14. /usr/share/selinux/devel/include/contrib/container.if:40: Error: duplicate definition of container_runtime_run(). Original definition on 40. <snip>... /usr/share/selinux/devel/include/contrib/container.if:589: Error: duplicate definition of docker_spc_stream_connect(). Original definition on 589. /usr/share/selinux/devel/include/contrib/container.if:603: Error: duplicate definition of container_spc_read_state(). Original definition on 603. Compiling targeted mcsconstrainedusers module /usr/bin/checkmodule: loading policy configuration from tmp/mcsconstrainedusers.tmp /usr/bin/checkmodule: policy configuration loaded /usr/bin/checkmodule: writing binary representation (version 17) to tmp/mcsconstrainedusers.mod Creating targeted mcsconstrainedusers.pp policy package rm tmp/mcsconstrainedusers.mod tmp/mcsconstrainedusers.mod.fc [root@laptop ~]# semodule -i mcsconstrainedusers.pp [root@laptop ~]# Cheers Phil Inactive hide details for Bill Durant ---30/05/2017 07:01:42---Hello Phil: Setting the categories instead of adding them with tBill Durant ---30/05/2017 07:01:42---Hello Phil: Setting the categories instead of adding them with the "+" worked! From: Bill Durant <littus(a)icloud.com> To: Philip Seeley <pseeley(a)au1.ibm.com> Cc: littus(a)icloud.com, selinux(a)lists.fedoraproject.org Date: 30/05/2017 07:01 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC Hello Phil: Setting the categories instead of adding them with the "+" worked! So it sounds like the chcat "+" option is not working as expected on CentOS 6.9. Do you concur? Thank you for your help Phil. The following series of steps show that it now works as expected: # uname -a Linux es300h 2.6.32-696.1.1.el6.x86_64 #1 SMP Tue Apr 11 17:13:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/redhat-release CentOS release 6.9 (Final) # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user s0 s0 git_shell_r green_u user s0 s0 green_r guest_u user s0 s0 guest_r red_u user s0 s0 red_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r xguest_u user s0 s0 xguest_r # semanage user -m -r s0-s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user s0 s0 git_shell_r green_u user s0 s0 green_r guest_u user s0 s0 guest_r red_u user s0 s0 red_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0-s0:c0.c1023 user_r xguest_u user s0 s0 xguest_r # cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh # service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ] # chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh # useradd foo # useradd bar # passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully. # passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a foo # semanage login -a bar # chcat -l -- c0 foo # chcat -l -- c1 bar # semanage login -l Login Name SELinux User MLS/MCS Range __default__ unconfined_u SystemLow-SystemHigh bar user_u SystemLow-Operator foo user_u SystemLow-NetworkAdministrator root unconfined_u SystemLow-SystemHigh system_u system_u SystemLow-SystemHigh # chcat -L -l foo bar foo: NetworkAdministrator bar: Operator # chcat -- +NetworkAdministrator /usr/local/soup/bin/foo.jar # ls -Z /usr/local/soup/bin/foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/foo.jar Now as the Linux user, foo, it works as expected: $ whoami foo $ id -Z user_u:user_r:user_t:SystemLow-NetworkAdministrator $ java -jar /usr/local/soup/bin/foo.jar Hello from the foo application Now as the Linux user, bar, it also works as expected: $ whoami bar $ id -Z user_u:user_r:user_t:SystemLow-Operator $ java -jar /usr/local/soup/bin/foo.jar Error: Unable to access jarfile /usr/local/soup/bin/foo.jar Regards, Bill On 05/28/2017 05:22 PM, Philip Seeley wrote: Hi Bill, I saw in a previous post that you were using CentOS 6.9 so this should work for you. It looks like the login configuration is not quite right as both users are showing SystemLow-SystemHigh when they logon. Check the login config shows they only have the categories they need, i.e. jack has c0 and mary has c1. If they're not correct try setting the categories rather than adding to them with a "+": [root@centos6 ~]# chcat -l -- c0 jack [root@centos6 ~]# chcat -l -- c1 mary [root@centos6 ~]# semanage login -l Login Name SELinux User MLS/MCS Range __default__ unconfined_u s0-s0:c0.c1023 jack user_u s0-s0:c0 mary user_u s0-s0:c1 root unconfined_u s0-s0:c0.c1023 system_u system_u s0-s0:c0.c1023 Then with: # ll -Z /usr/local/bin/ -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c0 jack -rw-r--r--. root root unconfined_u:object_r:bin_t:s0:c1 mary [root@centos6 ~]# cat /etc/system-release CentOS release 6.9 (Final) as jack: [jack@centos6 ~]$ id uid=500(jack) gid=500(jack) groups=500(jack) context=user_u:user_r:user_t:s0-s0:c0 [jack@centos6 ~]$ cat /usr/local/bin/jack Hi [jack@centos6 ~]$ cat /usr/local/bin/mary cat: /usr/local/bin/mary: Permission denied and as mary: [mary@centos6 ~]$ id uid=501(mary) gid=501(mary) groups=501(mary) context=user_u:user_r:user_t:s0-s0:c1 [mary@centos6 ~]$ cat /usr/local/bin/jack cat: /usr/local/bin/jack: Permission denied [mary@centos6 ~]$ cat /usr/local/bin/mary Hi Cheers Phil Inactive hide details for Bill D ---26/05/2017 05:19:44---Hello Phil: Thank you for the response. Your suggested fix resolved Bill D ---26/05/2017 05:19:44---Hello Phil: Thank you for the response. Your suggested fix resolved the error. From: Bill D <littus(a)icloud.com> To: Philip Seeley <pseeley(a)au1.ibm.com> Cc: littus(a)icloud.com, selinux(a)lists.fedoraproject.org Date: 26/05/2017 05:19 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC Hello Phil: Thank you for the response. Your suggested fix resolved the error. However, I am unable to get the desired effect. I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories. I would appreciate any other hints to make this work. Following are the details of what I did: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r # semanage user -m -r s0-s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r # cat setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh # service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ] # chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh # useradd foo # useradd bar # passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully. # passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a foo # semanage login -a bar # chcat -l -- +NetworkAdministrator foo # chcat -l -- +Operator bar # chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0? # chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar # ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected $ whoami foo $ id -Z user_u:user_r:user_t:SystemLow-SystemHigh $ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar $ java -jar /usr/local/soup/bin/Foo.jar Hello Foo Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected $ whoami bar $ id -Z user_u:user_r:user_t:SystemLow-SystemHigh $ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar $ java -jar /usr/local/soup/bin/Foo.jar Hello Foo Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category? Following is how to create the Foo.jar file: $ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } } $ cat manifest.txt Main-Class: $ javac Foo.java $ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%) Best Regards, Bill On 05/24/2017 04:39 PM, Philip Seeley wrote: Hi Bill, I think this was my mistake in transcribing. The user_u line after the "semanage user -m" command should be: user_u user SystemLow SystemLow-SystemHigh user_r So the command should have been: semanage user -m -r s0-s0:c0.c1023 user_u Or even: semanage user -m -r SystemLow-SystemHigh user_u Appologies for that. Phil Inactive hide details for Bill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u defiBill D ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of extending the user_u definition without From: Bill D <littus(a)icloud.com> To: Philip Seeley <pseeley(a)au1.ibm.com> Cc: littus(a)icloud.com, selinux(a)lists.fedoraproject.org Date: 25/05/2017 02:28 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC Hello Phil, I have tried your suggestion of extending the user_u definition without success: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r # semanage user -m -r s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r # useradd kate # passwd kate Changing password for user kate. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a kate libsemanage.validate_handler: MLS range s0 for Unix user regularuser exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, s0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would greatly appreciate any other hints to make this work. Regards, Bill On 5/23/2017 8:42 PM, Philip Seeley wrote: Hi Bill, This is probably because the default RHEL6 configuration does not include any categories in the user_u SELinux user's range: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0 user_r You probably have to extend the user definition to include the categories you're using. As an example, this gives all categories: # semanage user -m -r s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles guest_u user s0 s0 guest_r root user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r staff_u user s0 s0-s0:c0.c1023 staff_r sysadm_r system_r unconfined_r sysadm_u user s0 s0-s0:c0.c1023 sysadm_r system_u user s0 s0-s0:c0.c1023 system_r unconfined_r unconfined_u user s0 s0-s0:c0.c1023 system_r unconfined_r user_u user s0 s0:c0.c1023 user_r Hope that helps. Phil Inactive hide details for Bill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the stepBill Durant ---24/05/2017 12:34:53---Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that From: Bill Durant <littus(a)icloud.com> To: Philip Seeley <pseeley(a)au1.ibm.com> Cc: littus(a)icloud.com, selinux(a)lists.fedoraproject.org Date: 24/05/2017 12:34 Subject: Re: Controlling execution of Java JAR files with SELinux RBAC Hello Phil: Thank you for the suggestion. I have tried the steps from the URL that you provided without success. I get an error when I try to assign Linux user mary to an SELinux login as follows: # cat /etc/redhat-release CentOS release 6.9 (Final) ;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to /etc/selinux/targeted/setrans.conf # cat /etc/selinux/targeted/setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh # service mcstrans start # chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh # useradd mary # passwd mary Changing password for user mary. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a mary # chcat -l -- +NetworkAdministrator mary libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user mary exceeds allowed range s0 for SELinux user user_u (No such file or directory). libsemanage.validate_handler: seuser mapping [mary -> (user_u, s0-s0:c0)] is invalid (No such file or directory). libsemanage.dbase_llist_iterate: could not iterate over records (No such file or directory). /usr/sbin/semanage: Could not commit semanage transaction I would appreciate any hints on how to resolve that error. Thanks! Bill On 05/23/2017 05:49 PM, Philip Seeley wrote: Hi Bill, Have you thought about using categories? https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-getstarte… Cheers Phil Inactive hide details for Bill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the executBill D ---24/05/2017 09:52:00---Greetings: I have been trying to figure out how to control the execution of Java From: Bill D <littus(a)icloud.com> To: selinux(a)lists.fedoraproject.org Cc: littus(a)icloud.com Date: 24/05/2017 09:52 Subject: Controlling execution of Java JAR files with SELinux RBAC Greetings: I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC. I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar. Here is how jack executes jack.jar: java -jar jack.jar Here is how mary executes mary.jar: java -jar mary.jar I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar. How to configure SELinux RBAC to make that happen? I have tried various approaches without success. I have also tried the steps in http://forums.fedoraforum.org/archive/index.php/t-222938.html without success. I would greatly appreciate any hints. Regards, Bill _______________________________________________ selinux mailing list -- selinux(a)lists.fedoraproject.org To unsubscribe send an email to selinux-leave(a)lists.fedoraproject.org _______________________________________________ selinux mailing list -- selinux(a)lists.fedoraproject.org To unsubscribe send an email to selinux-leave(a)lists.fedoraproject.org _______________________________________________ selinux mailing list -- selinux(a)lists.fedoraproject.org To unsubscribe send an email to selinux-leave(a)lists.fedoraproject.org

1 0

Controlling execution of Java JAR files with SELinux RBAC
by Bill D 31 May '17

31 May '17

Greetings: I have been trying to figure out how to control the execution of Java JAR files with SELinux RBAC. I have two Linux users named joe and mary and two Java JAR files named jack.jar and mary.jar. Here is how jack executes jack.jar: java -jar jack.jar Here is how mary executes mary.jar: java -jar mary.jar I would like SELinux RBAC to prevent jack from executing mary.jar and prevent mary from executing jack.jar. How to configure SELinux RBAC to make that happen? I have tried various approaches without success. I have also tried the steps in http://forums.fedoraforum.org/archive/index.php/t-222938.html without success. I would greatly appreciate any hints. Regards, Bill

5 13

Re: Controlling execution of Java JAR files with SELinux RBAC
by Bill D 30 May '17

30 May '17

Hello Phil: Thank you for the response. Your suggested fix resolved the error. However, I am unable to get the desired effect. I am not able to prevent a Linux user from running/accessing a Java JAR file using SELinux categories. I would appreciate any other hints to make this work. Following are the details of what I did: # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow user_r xguest_u user SystemLow SystemLow xguest_r # semanage user -m -r s0-s0:c0.c1023 user_u # semanage user -l Labeling MLS/ MLS/ SELinux User Prefix MCS Level MCS Range SELinux Roles git_shell_u user SystemLow SystemLow git_shell_r guest_u user SystemLow SystemLow guest_r root user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r staff_u user SystemLow SystemLow-SystemHigh staff_r sysadm_r system_r unconfined_r sysadm_u user SystemLow SystemLow-SystemHigh sysadm_r system_u user SystemLow SystemLow-SystemHigh system_r unconfined_r unconfined_u user SystemLow SystemLow-SystemHigh system_r unconfined_r user_u user SystemLow SystemLow-SystemHigh user_r xguest_u user SystemLow SystemLow xguest_r # cat setrans.conf # # Multi-Category Security translation table for SELinux # # Uncomment the following to disable translation libary # disable=1 # # Objects can be categorized with 0-1023 categories defined by the admin. # Objects can be in more than one category at a time. # Categories are stored in the system as c0-c1023. Users can use this # table to translate the categories into a more meaningful output. # Examples: # s0:c0=CompanyConfidential # s0:c1=PatientRecord # s0:c2=Unclassified # s0:c3=TopSecret # s0:c1,c3=CompanyConfidentialRedHat s0:c0=NetworkAdministrator s0:c1=Operator s0=SystemLow s0-s0:c0.c1023=SystemLow-SystemHigh s0:c0.c1023=SystemHigh # service mcstrans restart Stopping mcstransd: [ OK ] Starting mcstransd: [ OK ] # chcat -L s0:c0 NetworkAdministrator s0:c1 Operator s0 SystemLow s0-s0:c0.c1023 SystemLow-SystemHigh s0:c0.c1023 SystemHigh # useradd foo # useradd bar # passwd foo Changing password for user foo. New password: Retype new password: passwd: all authentication tokens updated successfully. # passwd bar Changing password for user bar. New password: Retype new password: passwd: all authentication tokens updated successfully. # semanage login -a foo # semanage login -a bar # chcat -l -- +NetworkAdministrator foo # chcat -l -- +Operator bar # chcat -L -l bar foo bar: s0:c0.c1023,c1 <===== why is it not just s0:c1? foo: s0:c0.c1023,c0 <===== why is it not just just s0:c0? # chcat -- +NetworkAdministrator /usr/local/soup/bin/Foo.jar # ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar Now Login as the 'foo' Linux user and notice that it can run Foo.jar as expected $ whoami foo $ id -Z user_u:user_r:user_t:SystemLow-SystemHigh $ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar $ java -jar /usr/local/soup/bin/Foo.jar Hello Foo Now login as the 'bar' Linux user and notice that it can also run Foo.jar which is NOT expected $ whoami bar $ id -Z user_u:user_r:user_t:SystemLow-SystemHigh $ ls -Z /usr/local/soup/bin/Foo.jar -rwxr-xr-x. admin admin system_u:object_r:bin_t:NetworkAdministrator /usr/local/soup/bin/Foo.jar $ java -jar /usr/local/soup/bin/Foo.jar Hello Foo Why is Linux user 'bar' able to run/access Foo.jar when its category doesn't match Foo.jar's category? Following is how to create the Foo.jar file: $ cat Foo.java public class Foo { public static void main(String[] args) { System.out.println("Hello Foo"); } } $ cat manifest.txt Main-Class: $ javac Foo.java $ jar cvfe Foo.jar Foo Foo.class added manifest adding: Foo.class(in = 409) (out= 282)(deflated 31%) Best Regards, Bill On 05/24/2017 04:39 PM, Philip Seeley wrote: > > Hi Bill, > > I think this was my mistake in transcribing. The user_u line after the > "semanage user -m" command should be: > > user_u user SystemLow > SystemLow-SystemHigh user_r > > So the command should have been: > > semanage user -m -r s0-s0:c0.c1023 user_u > > Or even: > > semanage user -m -r SystemLow-SystemHigh user_u > > Appologies for that. > > Phil > > Inactive hide details for Bill D ---25/05/2017 02:28:19---Hello Phil, > I have tried your suggestion of extending the user_u defiBill D > ---25/05/2017 02:28:19---Hello Phil, I have tried your suggestion of > extending the user_u definition without > > From: Bill D <littus(a)icloud.com> > To: Philip Seeley <pseeley(a)au1.ibm.com> > Cc: littus(a)icloud.com, selinux(a)lists.fedoraproject.org > Date: 25/05/2017 02:28 > Subject: Re: Controlling execution of Java JAR files with SELinux RBAC > > ------------------------------------------------------------------------ > > > > Hello Phil, > > I have tried your suggestion of extending the user_u definition > without success: > > # semanage user -l > > Labeling MLS/ MLS/ > SELinux User Prefix MCS Level MCS Range > SELinux Roles > > git_shell_u user SystemLow SystemLow > git_shell_r > guest_u user SystemLow SystemLow > guest_r > root user SystemLow SystemLow-SystemHigh > staff_r sysadm_r system_r unconfined_r > staff_u user SystemLow SystemLow-SystemHigh > staff_r sysadm_r system_r unconfined_r > sysadm_u user SystemLow SystemLow-SystemHigh > sysadm_r > system_u user SystemLow SystemLow-SystemHigh > system_r unconfined_r > unconfined_u user SystemLow SystemLow-SystemHigh > system_r unconfined_r > user_u user SystemLow SystemLow user_r > xguest_u user SystemLow SystemLow > xguest_r > > # semanage user -m -r s0:c0.c1023 user_u > > # semanage user -l > > Labeling MLS/ MLS/ > SELinux User Prefix MCS Level MCS Range > SELinux Roles > > git_shell_u user SystemLow SystemLow > git_shell_r > guest_u user SystemLow SystemLow > guest_r > root user SystemLow SystemLow-SystemHigh > staff_r sysadm_r system_r unconfined_r > staff_u user SystemLow SystemLow-SystemHigh > staff_r sysadm_r system_r unconfined_r > sysadm_u user SystemLow SystemLow-SystemHigh > sysadm_r > system_u user SystemLow SystemLow-SystemHigh > system_r unconfined_r > unconfined_u user SystemLow SystemLow-SystemHigh > system_r unconfined_r > user_u user SystemLow SystemHigh user_r > xguest_u user SystemLow SystemLow > xguest_r > > # useradd kate > > # passwd kate > Changing password for user kate. > New password: > Retype new password: > passwd: all authentication tokens updated successfully. > > # semanage login -a kate > libsemanage.validate_handler: MLS range s0 for Unix user regularuser > exceeds allowed range s0:c0.c1023 for SELinux user user_u (No such > file or directory). > libsemanage.validate_handler: seuser mapping [regularuser -> (user_u, > s0)] is invalid (No such file or directory). > libsemanage.dbase_llist_iterate: could not iterate over records (No > such file or directory). > /usr/sbin/semanage: Could not commit semanage transaction > > I would greatly appreciate any other hints to make this work. > > Regards, > > Bill > > On 5/23/2017 8:42 PM, Philip Seeley wrote: > > Hi Bill, > > This is probably because the default RHEL6 configuration does > not include any categories in the user_u SELinux user's range: > > # semanage user -l > > Labeling MLS/ MLS/ > SELinux User Prefix MCS Level MCS Range > SELinux Roles > > guest_u user s0 s0 guest_r > root user s0 s0-s0:c0.c1023 > staff_r sysadm_r system_r unconfined_r > staff_u user s0 s0-s0:c0.c1023 > staff_r sysadm_r system_r unconfined_r > sysadm_u user s0 s0-s0:c0.c1023 > sysadm_r > system_u user s0 s0-s0:c0.c1023 > system_r unconfined_r > unconfined_u user s0 s0-s0:c0.c1023 > system_r unconfined_r > user_u user s0 s0 user_r > > You probably have to extend the user definition to include the > categories you're using. As an example, this gives all categories: > > # semanage user -m -r s0:c0.c1023 user_u > > # semanage user -l > > Labeling MLS/ MLS/ > SELinux User Prefix MCS Level MCS Range > SELinux Roles > > guest_u user s0 s0 guest_r > root user s0 s0-s0:c0.c1023 > staff_r sysadm_r system_r unconfined_r > staff_u user s0 s0-s0:c0.c1023 > staff_r sysadm_r system_r unconfined_r > sysadm_u user s0 s0-s0:c0.c1023 > sysadm_r > system_u user s0 s0-s0:c0.c1023 > system_r unconfined_r > unconfined_u user s0 s0-s0:c0.c1023 > system_r unconfined_r > user_u user s0 s0:c0.c1023 > user_r > > Hope that helps. > > Phil > > > Inactive hide details for Bill Durant ---24/05/2017 > 12:34:53---Hello Phil: Thank you for the suggestion. I have > tried the stepBill Durant ---24/05/2017 12:34:53---Hello Phil: > Thank you for the suggestion. I have tried the steps from the > URL that > > From: Bill Durant _<littus(a)icloud.com>_ <mailto:littus@icloud.com> > To: Philip Seeley _<pseeley(a)au1.ibm.com>_ > <mailto:pseeley@au1.ibm.com> > Cc: _littus(a)icloud.com_ <mailto:littus@icloud.com>, > _selinux(a)lists.fedoraproject.org_ > <mailto:selinux@lists.fedoraproject.org> > Date: 24/05/2017 12:34 > Subject: Re: Controlling execution of Java JAR files with > SELinux RBAC > ------------------------------------------------------------------------ > > > > Hello Phil: > > Thank you for the suggestion. I have tried the steps from the > URL that you provided without success. > > I get an error when I try to assign Linux user mary to an > SELinux login as follows: > > # cat /etc/redhat-release > CentOS release 6.9 (Final) > > ;;; Add "s0:c0=NetworkAdministrator" and "s0:c1=Operator" to > /etc/selinux/targeted/setrans.conf > > # cat /etc/selinux/targeted/setrans.conf > # > # Multi-Category Security translation table for SELinux > # > # Uncomment the following to disable translation libary > # disable=1 > # > # Objects can be categorized with 0-1023 categories defined by > the admin. > # Objects can be in more than one category at a time. > # Categories are stored in the system as c0-c1023. Users can > use this > # table to translate the categories into a more meaningful output. > # Examples: > # s0:c0=CompanyConfidential > # s0:c1=PatientRecord > # s0:c2=Unclassified > # s0:c3=TopSecret > # s0:c1,c3=CompanyConfidentialRedHat > s0:c0=NetworkAdministrator > s0:c1=Operator > s0=SystemLow > s0-s0:c0.c1023=SystemLow-SystemHigh > s0:c0.c1023=SystemHigh > > # service mcstrans start > > # chcat -L > s0:c0 NetworkAdministrator > s0:c1 Operator > s0 SystemLow > s0-s0:c0.c1023 SystemLow-SystemHigh > s0:c0.c1023 SystemHigh > > > # useradd mary > # passwd mary > Changing password for user mary. > New password: > Retype new password: > passwd: all authentication tokens updated successfully. > > # semanage login -a mary > > # chcat -l -- +NetworkAdministrator mary > libsemanage.validate_handler: MLS range s0-s0:c0 for Unix user > mary exceeds allowed range s0 for SELinux user user_u (No such > file or directory). > libsemanage.validate_handler: seuser mapping [mary -> (user_u, > s0-s0:c0)] is invalid (No such file or directory). > libsemanage.dbase_llist_iterate: could not iterate over > records (No such file or directory). > /usr/sbin/semanage: Could not commit semanage transaction > > I would appreciate any hints on how to resolve that error. > > Thanks! > > Bill > > > On 05/23/2017 05:49 PM, Philip Seeley wrote: > > Hi Bill, > > Have you thought about using categories?_ > > __https://www.centos.org/docs/5/html/Deployment_Guide-en-US/sec-mcs-getstar… > > Cheers > > Phil > > Inactive hide details for Bill D ---24/05/2017 > 09:52:00---Greetings: I have been trying to > figure out how to control the executBill D > ---24/05/2017 09:52:00---Greetings: I have > been trying to figure out how to control the > execution of Java > > From: Bill D _<littus(a)icloud.com>_ > <mailto:littus@icloud.com> > To: _selinux(a)lists.fedoraproject.org_ > <mailto:selinux@lists.fedoraproject.org> > Cc: _littus(a)icloud.com_ <mailto:littus@icloud.com> > Date: 24/05/2017 09:52 > Subject: Controlling execution of Java JAR > files with SELinux RBAC > ------------------------------------------------------------------------ > > > > Greetings: > > I have been trying to figure out how to > control the execution of Java > JAR files with SELinux RBAC. > > I have two Linux users named joe and mary and > two Java JAR files named > jack.jar and mary.jar. > > Here is how jack executes jack.jar: java -jar > jack.jar > > Here is how mary executes mary.jar: java -jar > mary.jar > > I would like SELinux RBAC to prevent jack from > executing mary.jar and > prevent mary from executing jack.jar. > > How to configure SELinux RBAC to make that happen? > > I have tried various approaches without > success. I have also tried the > steps in > _http://forums.fedoraforum.org/archive/index.php/t-222938.html_ > without success. > > I would greatly appreciate any hints. > > Regards, > > Bill > > > _______________________________________________ > selinux mailing list -- > _selinux(a)lists.fedoraproject.org_ > <mailto:selinux@lists.fedoraproject.org> > To unsubscribe send an email to > _selinux-leave(a)lists.fedoraproject.org_ > <mailto:selinux-leave@lists.fedoraproject.org> > > > > > > _______________________________________________ > selinux mailing list -- > _selinux(a)lists.fedoraproject.org_ > <mailto:selinux@lists.fedoraproject.org> > To unsubscribe send an email to > _selinux-leave(a)lists.fedoraproject.org_ > <mailto:selinux-leave@lists.fedoraproject.org> > > > >

4 5

RHEL7 screen issue
by Steve Huston 24 May '17

24 May '17

I'm having some issues with using 'screen' on RHEL7-based systems. It seems that things like utmp/wtmp writing do not work, which I haven't looked into yet (which makes 'deflogin' fail), but the one that was more easily tracked down is things like log files. $ id uid=9318(huston) ... context=staff_u:staff_r:staff_t:s0-s0:c0.c1023 $ ls -lZ `which screen` -rwxr-sr-x. root screen system_u:object_r:screen_exec_t:s0 /usr/bin/screen* # ps -efZ | grep -i screen staff_u:staff_r:staff_screen_t:s0-s0:c0.c1023 huston 14296 1 0 Mar02 ? 00:06:00 SCREEN staff_u:staff_r:staff_screen_t:s0-s0:c0.c1023 huston 3432606 3432605 0 10:51 pts/0 00:00:00 screen -raAx # ls -lZ /home/huston/screenlog.16 -rw-rw-r--. huston huston staff_u:object_r:user_home_dir_t:s0 /home/huston/screenlog.16 This file could only be written after I set permissive mode (or add a selinux policy that lets allow user_screen_t user_home_dir_t:file { append create getattr open }; and staff_screen_t user_home_dir_t:file { append create getattr open }; which of course works great to create the file, but then I cannot read it). Looking through serefpolicy-contrib-3.13.1/screen.te (from selinux-policy-3.13.1-102.el7_3.16.src.rpm) I see three lines: userdom_user_home_dir_filetrans($3, screen_home_t, dir, ".screen") userdom_user_home_dir_filetrans($3, screen_home_t, file, ".screenrc") userdom_user_home_dir_filetrans($3, screen_home_t, file, ".tmux.conf") Which works for relabeling those files so that screen can read them, but what I don't see is something that is telling the system that screen should be creating files as user_home_dir_t, which seems to be the problem. I would assume they should also be screen_home_t, so that screen can reopen the files for appending if the logfile is reopened, but I know not how to do that. Any insight would be appreaciated - I'm guessing there's something missing in the reference policy, but I'm not opposed to adding something to fix it locally until the change makes its way through the proper channels. -- Steve Huston - W2SRH - Unix Sysadmin, PICSciE/CSES & Astrophysical Sci Princeton University | ICBM Address: 40.346344 -74.652242 345 Lewis Library |"On my ship, the Rocinante, wheeling through Princeton, NJ 08544 | the galaxies; headed for the heart of Cygnus, (267) 793-0852 | headlong into mystery." -Rush, 'Cygnus X-1'

1 0

Fedora COPR repositories with builds of latest code
by Petr Lautrbach 24 May '17

24 May '17

For the motivation see https://marc.info/?l=selinux&m=149435307518336&w=2 I've restarted building of Fedora packages based on latest SELinux userspace code in Fedora COPR. Packages are built using the https://gitlab.com/bachradsusi/selinux-rpm project. There is a new selinux.spec [1] file which allows to build all Fedora packages from one src.rpm and Makefile which makes the process simple. Currently there are two COPR projects: * https://copr.fedorainfracloud.org/coprs/plautrba/selinux-fedora/ This is built with Python3 support based on Fedora patches which are rebased against latest upstream code. * https://copr.fedorainfracloud.org/coprs/plautrba/selinux-SELinuxProject/ This is based on pure upstream sources and without Python 3. Currently I run copr builds manually but the plan is to make it fully automated. Let me know if you find it useful or if you have ideas, comments and so on. [1] https://gitlab.com/bachradsusi/selinux-rpm/blob/master/selinux.spec Thanks, Petr

1 0

Re: upss.. reason="memory violation" sig=11 => segfault htcondor
by Gary Tierney 24 May '17

24 May '17

CC'ing to list. Replied directly to sender by accident. On Tue, May 23, 2017 at 01:45:12PM +0100, Gary Tierney wrote: > Try running `semodule -DB`. Looks like something might be dontaudited. After > running that command reproduce your error and check the audit log using Lukas' > ausearch command. > > On Tue, May 23, 2017 at 12:54:43PM +0100, lejeczek wrote: > > > > > > On 23/05/17 12:07, Lukas Vrabec wrote: > > > On 05/23/2017 12:56 PM, lejeczek wrote: > > > > hi fellas > > > > > > > > I don't want to disable se, I cannot find booleans, there is no > > > > domain > > > > for htcondor I think. > > > > How do I let my htcondor through? > > > > with se: > > > > > > > > condor_submit[29217]: segfault at 0 ip (null) sp > > > > 00007ffd7dfa61c8 > > > > > > > > type=ANOM_ABEND msg=audit(1495536871.977:1484): auid=2501 uid=1177 > > > > gid=513 ses=63 > > > > subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 pid=1532 > > > > comm="condor_submit" reason="memory violation" sig=11 > > > > > > > > disable se and works. > > > > > > > > many thanks. > > > > L. > > > > _______________________________________________ > > > > selinux mailing list -- selinux(a)lists.fedoraproject.org > > > > To unsubscribe send an email to > > > > selinux-leave(a)lists.fedoraproject.org > > > > > > Hi, > > > > > > Could you reproduce the scenario and then attach output of: > > > # ausearch -m AVC,USER_AVC -ts recent > > > > > > > > > Thanks, > > > Lukas. > > > > > hi, > > ausearch as above finds nothing, with only "recent" all the grep condor > > finds is that one line. > > Should I include a few more lines before that condor one? > > _______________________________________________ > > selinux mailing list -- selinux(a)lists.fedoraproject.org > > To unsubscribe send an email to selinux-leave(a)lists.fedoraproject.org > > -- > Gary Tierney > > GPG fingerprint: 412C 0EF9 C305 68E6 B660 BDAF 706E D765 85AA 79D8 > https://sks-keyservers.net/pks/lookup?op=get&search=0x706ED76585AA79D8 -- Gary Tierney GPG fingerprint: 412C 0EF9 C305 68E6 B660 BDAF 706E D765 85AA 79D8 https://sks-keyservers.net/pks/lookup?op=get&search=0x706ED76585AA79D8

3 3

guest_u with limited guest_exec_content
by Lakshmipathi.G 24 May '17

24 May '17

Hi, I need some advise/suggestion on below setup. We created 'guest_u' accounts with shell access. Now we like to allow: 1) Only selected guest_u users has "guest_exec_content->on" permission. (ex: user1,user3 has exec permission, but user2 don't have permission) 2) for users in (1) allow them to execute specific binary(~/abc.bin) but not all. (ex: user1,user3 can execute only ~/abc.bin but can't other binary files) Is that possible to achieve? any suggestion how to create such setup? thanks. ---- Cheers, Lakshmipathi.G http://www.giis.co.in http://www.webminal.org

2 4

upss.. reason="memory violation" sig=11 => segfault htcondor
by lejeczek 23 May '17

23 May '17

hi fellas I don't want to disable se, I cannot find booleans, there is no domain for htcondor I think. How do I let my htcondor through? with se: condor_submit[29217]: segfault at 0 ip (null) sp 00007ffd7dfa61c8 type=ANOM_ABEND msg=audit(1495536871.977:1484): auid=2501 uid=1177 gid=513 ses=63 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 pid=1532 comm="condor_submit" reason="memory violation" sig=11 disable se and works. many thanks. L.

2 2

Is this an error that should be BZ'd?
by Ed Greshko 16 May '17

16 May '17

I was having some problems with getting a setting to stick under network manager. I wanted to eliminate a silent selinux AVC. So I issued a semodule -DB. This is on F25, BTW. But now I'm continuously getting the following.... SELinux is preventing systemd from 'read, write' accesses on the unix_stream_socket unix_stream_socket. ***** Plugin catchall (100. confidence) suggests ************************** If you believe that systemd should be allowed read write access on the unix_stream_socket unix_stream_socket by default. Then you should report this as a bug. You can generate a local policy module to allow this access. Do allow this access for now by executing: # ausearch -c 'systemd' --raw | audit2allow -M my-systemd # semodule -X 300 -i my-systemd.pp Additional Information: Source Context system_u:system_r:init_t:s0 Target Context system_u:system_r:kernel_t:s0-s0:c0.c1023 Target Objects unix_stream_socket [ unix_stream_socket ] Source systemd Source Path systemd Port <Unknown> Host meimei.greshko.com Source RPM Packages Target RPM Packages Policy RPM <Unknown> Selinux Enabled True Policy Type targeted Enforcing Mode Enforcing Host Name meimei.greshko.com Platform Linux meimei.greshko.com 4.10.8-200.fc25.x86_64 #1 SMP Fri Mar 31 13:20:22 UTC 2017 x86_64 x86_64 Alert Count 2 First Seen 2017-04-11 13:59:41 CST Last Seen 2017-04-11 13:59:41 CST Local ID a9f3060f-290b-4777-bf8f-28d0313ca9f1 Raw Audit Messages type=AVC msg=audit(1491890381.516:407): avc: denied { read write } for pid=1 comm="systemd" path="socket:[65875]" dev="sockfs" ino=65875 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:kernel_t:s0-s0:c0.c1023 tclass=unix_stream_socket permissive=0 Hash: systemd,init_t,kernel_t,unix_stream_socket,read,write Should I follow the recommendation of generating a local policy? Should this be BZ'd? -- Fedora Users List - The place to go to get others to do the work for you

2 1

ejabberd and Fedora 26
by Randy Barlow 15 May '17

15 May '17

Hello! A few weeks ago, I submitted a couple of pull requests to get ejabberd working on Fedora 26 and Rawhide[0][1], but the pull requests haven't gotten much attention. ejabberd won't start on Fedora 26 or Rawhide[2], so it would be good to get these merged soon (hopefully before the Fedora 26 beta). Thanks for your attention! [0] https://github.com/fedora-selinux/selinux-policy-contrib/pull/7 [1] https://github.com/fedora-selinux/selinux-policy-contrib/pull/8 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1424823

3 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

selinux May 2017