spacewalk-commits February 2011

spacewalk-commits@lists.fedorahosted.org

9 participants
356 discussions

16 commits - client/debian
by Miroslav Suchý 15 Feb '11

15 Feb '11

client/debian/DEBIAN-HOWTO | 34 client/debian/apt-spacewalk/debian/apt-spacewalk.install | 1 client/debian/apt-spacewalk/debian/changelog | 6 client/debian/apt-spacewalk/debian/compat | 1 client/debian/apt-spacewalk/debian/control | 15 client/debian/apt-spacewalk/debian/copyright | 21 client/debian/apt-spacewalk/debian/docs | 2 client/debian/apt-spacewalk/debian/pycompat | 1 client/debian/apt-spacewalk/debian/rules | 46 client/debian/apt-spacewalk/debian/source/format | 1 client/debian/apt-spacewalk/debian/watch | 2 client/debian/apt-spacewalk/spacewalk.py | 263 ++ client/debian/python-ethtool-0.5/.pc/.quilt_patches | 1 client/debian/python-ethtool-0.5/.pc/.quilt_series | 1 client/debian/python-ethtool-0.5/.pc/.version | 1 client/debian/python-ethtool-0.5/COPYING | 339 +++ client/debian/python-ethtool-0.5/MANIFEST | 16 client/debian/python-ethtool-0.5/Makefile | 26 client/debian/python-ethtool-0.5/debian/changelog | 12 client/debian/python-ethtool-0.5/debian/compat | 1 client/debian/python-ethtool-0.5/debian/control | 15 client/debian/python-ethtool-0.5/debian/copyright | 38 client/debian/python-ethtool-0.5/debian/install | 2 client/debian/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 | 155 + client/debian/python-ethtool-0.5/debian/patches/series | 1 client/debian/python-ethtool-0.5/debian/python-ethtool.manpages | 2 client/debian/python-ethtool-0.5/debian/rules | 20 client/debian/python-ethtool-0.5/debian/source/format | 1 client/debian/python-ethtool-0.5/debian/watch | 2 client/debian/python-ethtool-0.5/man/pethtool.8.asciidoc | 81 client/debian/python-ethtool-0.5/man/pifconfig.8.asciidoc | 42 client/debian/python-ethtool-0.5/pethtool.py | 380 +++ client/debian/python-ethtool-0.5/pifconfig.py | 98 client/debian/python-ethtool-0.5/python-ethtool/etherinfo.c | 333 +++ client/debian/python-ethtool-0.5/python-ethtool/etherinfo.h | 35 client/debian/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c | 230 ++ client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.c | 319 +++ client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.h | 38 client/debian/python-ethtool-0.5/python-ethtool/etherinfo_struct.h | 92 client/debian/python-ethtool-0.5/python-ethtool/ethtool-copy.h | 373 +++ client/debian/python-ethtool-0.5/python-ethtool/ethtool.c | 1062 ++++++++++ client/debian/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec | 76 client/debian/python-ethtool-0.5/setup.py | 69 43 files changed, 4254 insertions(+) New commits: commit 0e5668f0cfd96b289a188deb2235dc19e78664be Merge: cd3c2fa... 42f092b... Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 17:19:18 2011 +0100 Merge branch 'debian' commit 42f092b870dd68d204983264bcf7dfdbe1631028 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 17:07:36 2011 +0100 edit HOWTO to reflect new paths diff --git a/client/debian/DEBIAN-HOWTO b/client/debian/DEBIAN-HOWTO index ed04f6a..7da962e 100644 --- a/client/debian/DEBIAN-HOWTO +++ b/client/debian/DEBIAN-HOWTO @@ -2,12 +2,11 @@ HOW TO BUILD DEBIAN PACKAGES python-rhnlib in client/rhel/rhnlib ----------------------------------- -git checkout master cd client/rhel/rhnlib tito build --tgz copy rhnlib-2.5.27.tar.gz /tmp/python-rhnlib_2.5.27.orig.tar.gz -git checkout debian -cd .. +cd - +cd client/debian cp -a rhnlib /tmp/python-rhnlib-2.5.27 cd /tmp/python-rhnlib-2.5.27 debuild -i -S @@ -22,8 +21,8 @@ python-ethtool-0.5 in spec-tree/python-ethtool-0.5 apt-spacewalk -apt-spacewalk is not in master, so the instructions is little differen: -cd client/apt-spacewalk +apt-spacewalk - instructions are little different: +cd client/debian/apt-spacewalk tar zcvf /tmp/apt-spacewalk_1.0.0.orig.tar.gz spacewalk.py cd .. cp -a apt-spacewalk /tmp/apt-spacewalk-1.0.0 commit facbc83d627317af1ea295b8b2187d36a73f346e Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 17:02:55 2011 +0100 move DEBIAN-HOWTO to client/debian diff --git a/DEBIAN-HOWTO b/DEBIAN-HOWTO deleted file mode 100644 index ed04f6a..0000000 --- a/DEBIAN-HOWTO +++ /dev/null @@ -1,35 +0,0 @@ -HOW TO BUILD DEBIAN PACKAGES - -python-rhnlib in client/rhel/rhnlib ------------------------------------ -git checkout master -cd client/rhel/rhnlib -tito build --tgz -copy rhnlib-2.5.27.tar.gz /tmp/python-rhnlib_2.5.27.orig.tar.gz -git checkout debian -cd .. -cp -a rhnlib /tmp/python-rhnlib-2.5.27 -cd /tmp/python-rhnlib-2.5.27 -debuild -i -S -# and if you have configured dupload properly, then: -dupload -t mentors python-rhnlib_2.5.27-1_source.changes - -Similary for other packages. - -All packages available: -python-rhnlib in client/rhel/rhnlib -python-ethtool-0.5 in spec-tree/python-ethtool-0.5 -apt-spacewalk - - -apt-spacewalk is not in master, so the instructions is little differen: -cd client/apt-spacewalk -tar zcvf /tmp/apt-spacewalk_1.0.0.orig.tar.gz spacewalk.py -cd .. -cp -a apt-spacewalk /tmp/apt-spacewalk-1.0.0 -cd /tmp/apt-spacewalk-1.0.0 -#build source package -debuild -i -S -#or build binary package -debuild -b - diff --git a/client/debian/DEBIAN-HOWTO b/client/debian/DEBIAN-HOWTO new file mode 100644 index 0000000..ed04f6a --- /dev/null +++ b/client/debian/DEBIAN-HOWTO @@ -0,0 +1,35 @@ +HOW TO BUILD DEBIAN PACKAGES + +python-rhnlib in client/rhel/rhnlib +----------------------------------- +git checkout master +cd client/rhel/rhnlib +tito build --tgz +copy rhnlib-2.5.27.tar.gz /tmp/python-rhnlib_2.5.27.orig.tar.gz +git checkout debian +cd .. +cp -a rhnlib /tmp/python-rhnlib-2.5.27 +cd /tmp/python-rhnlib-2.5.27 +debuild -i -S +# and if you have configured dupload properly, then: +dupload -t mentors python-rhnlib_2.5.27-1_source.changes + +Similary for other packages. + +All packages available: +python-rhnlib in client/rhel/rhnlib +python-ethtool-0.5 in spec-tree/python-ethtool-0.5 +apt-spacewalk + + +apt-spacewalk is not in master, so the instructions is little differen: +cd client/apt-spacewalk +tar zcvf /tmp/apt-spacewalk_1.0.0.orig.tar.gz spacewalk.py +cd .. +cp -a apt-spacewalk /tmp/apt-spacewalk-1.0.0 +cd /tmp/apt-spacewalk-1.0.0 +#build source package +debuild -i -S +#or build binary package +debuild -b + commit 8ab3a39c011d0d9a895c8d76d479005c2a18e016 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 17:01:26 2011 +0100 move debian variant of rhnlib to client/debian diff --git a/client/rhel/rhnlib/debian/changelog b/client/rhel/rhnlib/debian/changelog deleted file mode 100644 index 2ae6b7b..0000000 --- a/client/rhel/rhnlib/debian/changelog +++ /dev/null @@ -1,6 +0,0 @@ -python-rhnlib (2.5.27-1) unstable; urgency=low - - * Initial release (Closes: #597490) Package was created. - - -- Miroslav Suchý <miroslav(a)suchy.cz> Mon, 20 Sep 2010 10:38:44 +0200 - diff --git a/client/rhel/rhnlib/debian/compat b/client/rhel/rhnlib/debian/compat deleted file mode 100644 index 7f8f011..0000000 --- a/client/rhel/rhnlib/debian/compat +++ /dev/null @@ -1 +0,0 @@ -7 diff --git a/client/rhel/rhnlib/debian/control b/client/rhel/rhnlib/debian/control deleted file mode 100644 index 26e5a62..0000000 --- a/client/rhel/rhnlib/debian/control +++ /dev/null @@ -1,18 +0,0 @@ -Source: python-rhnlib -Section: python -Priority: extra -Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> -Build-Depends: python, debhelper (>= 7.0.50~) -Build-Depends-Indep: python-support (>= 0.8) -Standards-Version: 3.9.1 -Homepage: https://fedorahosted.org/spacewalk - -Package: python-rhnlib -Architecture: all -Depends: ${python:Depends}, ${misc:Depends}, python-openssl -Provides: ${python:Provides} -Description: Collection of Python modules used by the Spacewalk software - Collection of base Python modules used by the Red Hat Network - (http://rhn.redhat.com) and Spacewalk software. - This is common library used by both clients and server. - diff --git a/client/rhel/rhnlib/debian/copyright b/client/rhel/rhnlib/debian/copyright deleted file mode 100644 index 52c8c06..0000000 --- a/client/rhel/rhnlib/debian/copyright +++ /dev/null @@ -1,21 +0,0 @@ -Rhnlib is copyright 2010 by Red Hat Inc. -Rhnlib is currently developed by Spacewalk Development Team <spacewalk-devel(a)redhat.com>. - -License: GPLv2 - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. - -See /usr/share/common-licenses/GPL-2, or -<http://www.gnu.org/copyleft/gpl.txt> for the terms of the latest version -of the GNU General Public License. diff --git a/client/rhel/rhnlib/debian/docs b/client/rhel/rhnlib/debian/docs deleted file mode 100644 index 70cfe37..0000000 --- a/client/rhel/rhnlib/debian/docs +++ /dev/null @@ -1,4 +0,0 @@ -ChangeLog -copyright -README -TODO diff --git a/client/rhel/rhnlib/debian/pycompat b/client/rhel/rhnlib/debian/pycompat deleted file mode 100644 index 0cfbf08..0000000 --- a/client/rhel/rhnlib/debian/pycompat +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/client/rhel/rhnlib/debian/python-rhnlib.dsc b/client/rhel/rhnlib/debian/python-rhnlib.dsc deleted file mode 100644 index 217c99a..0000000 --- a/client/rhel/rhnlib/debian/python-rhnlib.dsc +++ /dev/null @@ -1,15 +0,0 @@ -Format: 1.0 -Source: python-rhnlib -Binary: python-rhnlib -Architecture: all -Version: 2.5.27-1 -Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> -Homepage: https://fedorahosted.org/spacewalk/ -Standards-Version: 3.7.3 -Build-Depends: python-all-dev, python-support (>= 0.8), debhelper (>= 7) -Checksums-Sha1: - 444fe0994b77e6a9cc8a006fd1bcb003115c9091 51389 rhnlib-2.5.27.tar.gz -Checksums-Sha256: - 31394cab7c60f25707c704ff2a1a722e335626ae20fc165db61d20b6be856291 51389 rhnlib-2.5.27.tar.gz -Files: - 3b5541a03a0690b26a2691d44076fa81 rhnlib-2.5.27.tar.gz diff --git a/client/rhel/rhnlib/debian/rules b/client/rhel/rhnlib/debian/rules deleted file mode 100755 index d581922..0000000 --- a/client/rhel/rhnlib/debian/rules +++ /dev/null @@ -1,25 +0,0 @@ -#!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - - -override_dh_auto_build: - if [ ! -e setup.py ]; then sed -e "s/\@VERSION\@/$(shell dpkg-parsechangelog | grep Version: | cut -f2 -d' ' | cut -f1 -d- )/" -e 's/\@NAME\@/rhnlib/' setup.py.in > setup.py; fi - if [ ! -e setup.cfg ]; then sed 's/\@RELEASE\@/$(shell dpkg-parsechangelog | grep Version: | cut -f2 -d' ' | cut -f2 -d- )/' setup.cfg.in > setup.cfg; fi - dh_auto_configure --buildsystem=python_distutils - -clean: - if [ -f setup.py ]; then dh --buildsystem=python_distutils $@; fi - rm -f setup.py setup.cfg - rm -rf build - -%: - dh --buildsystem=python_distutils $@ - diff --git a/client/rhel/rhnlib/debian/source/format b/client/rhel/rhnlib/debian/source/format deleted file mode 100644 index 163aaf8..0000000 --- a/client/rhel/rhnlib/debian/source/format +++ /dev/null @@ -1 +0,0 @@ -3.0 (quilt) diff --git a/client/rhel/rhnlib/debian/watch b/client/rhel/rhnlib/debian/watch deleted file mode 100644 index c76ceee..0000000 --- a/client/rhel/rhnlib/debian/watch +++ /dev/null @@ -1,2 +0,0 @@ -version=3 -https://fedorahosted.org/releases/s/p/spacewalk/rhnlib-(.*)\.tar\.gz commit 9c08b1862ec063a8fd0b4f36c4df142ef662d056 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 16:55:49 2011 +0100 move apt-spacewalk to client/debian diff --git a/client/apt-spacewalk/debian/apt-spacewalk.install b/client/apt-spacewalk/debian/apt-spacewalk.install deleted file mode 100644 index 6819a30..0000000 --- a/client/apt-spacewalk/debian/apt-spacewalk.install +++ /dev/null @@ -1 +0,0 @@ -spacewalk.py /usr/lib/apt/methods/ diff --git a/client/apt-spacewalk/debian/changelog b/client/apt-spacewalk/debian/changelog deleted file mode 100644 index 8235644..0000000 --- a/client/apt-spacewalk/debian/changelog +++ /dev/null @@ -1,6 +0,0 @@ -apt-spacewalk (1.0.0-1) unstable; urgency=low - - * Initial release Package was created. - - -- Miroslav Suchý <miroslav(a)suchy.cz> Mon, 20 Sep 2010 10:38:44 +0200 - diff --git a/client/apt-spacewalk/debian/compat b/client/apt-spacewalk/debian/compat deleted file mode 100644 index 7f8f011..0000000 --- a/client/apt-spacewalk/debian/compat +++ /dev/null @@ -1 +0,0 @@ -7 diff --git a/client/apt-spacewalk/debian/control b/client/apt-spacewalk/debian/control deleted file mode 100644 index 96b6a22..0000000 --- a/client/apt-spacewalk/debian/control +++ /dev/null @@ -1,15 +0,0 @@ -Source: apt-spacewalk -Section: python -Priority: extra -Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> -Build-Depends: python, debhelper (>= 7.0.50~) -Build-Depends-Indep: python-support (>= 0.8) -Standards-Version: 3.9.1 -Homepage: https://fedorahosted.org/spacewalk - -Package: apt-spacewalk -Architecture: all -Depends: ${python:Depends}, ${misc:Depends}, rhn-client-tools -Provides: ${python:Provides} -Description: Spacewalk transport for apt-get. - This is used to connect to Spacewalk servers. diff --git a/client/apt-spacewalk/debian/copyright b/client/apt-spacewalk/debian/copyright deleted file mode 100644 index 98b52fb..0000000 --- a/client/apt-spacewalk/debian/copyright +++ /dev/null @@ -1,21 +0,0 @@ -apt-spacewalk is copyright 2011 by Red Hat Inc. -apt-spacewalk is currently developed by Spacewalk Development Team <spacewalk-devel(a)redhat.com>. - -License: GPLv2 - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. - -See /usr/share/common-licenses/GPL-2, or -<http://www.gnu.org/copyleft/gpl.txt> for the terms of the latest version -of the GNU General Public License. diff --git a/client/apt-spacewalk/debian/docs b/client/apt-spacewalk/debian/docs deleted file mode 100644 index a48c3b0..0000000 --- a/client/apt-spacewalk/debian/docs +++ /dev/null @@ -1,2 +0,0 @@ -ChangeLog -copyright diff --git a/client/apt-spacewalk/debian/pycompat b/client/apt-spacewalk/debian/pycompat deleted file mode 100644 index 0cfbf08..0000000 --- a/client/apt-spacewalk/debian/pycompat +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/client/apt-spacewalk/debian/rules b/client/apt-spacewalk/debian/rules deleted file mode 100755 index e652103..0000000 --- a/client/apt-spacewalk/debian/rules +++ /dev/null @@ -1,46 +0,0 @@ -#!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -install: build - dh_testdir - dh_testroot - dh_prep - dh_installdirs -A $(CURDIR)/usr/lib/apt/methods/ - dh_install - -build: build-stamp - -build-stamp: - dh_testdir - touch build-stamp - -clean: - rm -rf build - -binary: binary-indep binary-arch - -# Build architecture-independent files here. -binary-indep: build install -# We have nothing to do by default. - -# Build architecture-dependent files here. -binary-arch: build install - dh_testdir - dh_testroot - dh_installdebconf - dh_installdeb - dh_python - dh_gencontrol - dh_md5sums - dh_builddeb - -.PHONY: build clean binary-indep binary-arch binary install - diff --git a/client/apt-spacewalk/debian/source/format b/client/apt-spacewalk/debian/source/format deleted file mode 100644 index 163aaf8..0000000 --- a/client/apt-spacewalk/debian/source/format +++ /dev/null @@ -1 +0,0 @@ -3.0 (quilt) diff --git a/client/apt-spacewalk/debian/watch b/client/apt-spacewalk/debian/watch deleted file mode 100644 index c76ceee..0000000 --- a/client/apt-spacewalk/debian/watch +++ /dev/null @@ -1,2 +0,0 @@ -version=3 -https://fedorahosted.org/releases/s/p/spacewalk/rhnlib-(.*)\.tar\.gz diff --git a/client/apt-spacewalk/spacewalk.py b/client/apt-spacewalk/spacewalk.py deleted file mode 100755 index d1faedf..0000000 --- a/client/apt-spacewalk/spacewalk.py +++ /dev/null @@ -1,263 +0,0 @@ -#!/usr/bin/python -u -# -# Very early prototype of apt-transport-spacewalk -# -# Author: Simon Lukasik <xlukas08 [at] stud.fit.vutbr.cz> -# Date: 2011-01-01 -# License: GPLv2 -# -# - -import sys -import re -import hashlib - -import warnings -warnings.filterwarnings("ignore", message="the md5 module is deprecated; use hashlib instead") -sys.path.append("/usr/share/rhn/") - -from urlparse import urlparse -from rhn.connections import HTTPConnection, HTTPSConnection -from up2date_client import config -from up2date_client import rhnChannel -from up2date_client import up2dateAuth -from up2date_client import up2dateErrors - - - -class pkg_acquire_method: - """ - This is slightly modified python variant of apt-pkg/acquire-method. - It is a skeleton class that implements only very basic of apt methods - functionality. - """ - __eof = False - - def __init__(self): - print "100 Capabilities\nVersion: 1.0\nSingle-Instance: true\n\n", - - def __get_next_msg(self): - """ - Apt uses for communication with its methods the text protocol similar - to http. This function parses the protocol messages from stdin. - """ - if self.__eof: - return None - result = {}; - line = sys.stdin.readline() - if not line: - self.__eof = True - return None - s = line.split(" ", 1) - result['_number'] = int(s[0]) - result['_text'] = s[1].strip() - - while not self.__eof: - line = sys.stdin.readline() - if not line: - self.__eof = True - return result - if line == '\n': - return result - s = line.split(":", 1) - result[s[0]] = s[1].strip() - - def __dict2msg(self, msg): - """Convert dictionary to http like message""" - result = "" - for item in msg.keys(): - if msg[item] != None: - result += item + ": " + msg[item] + "\n" - return result - - def status(self, **kwargs): - print "102 Status\n%s\n" % self.__dict2msg(kwargs), - - def uri_start(self, msg): - print "200 URI Start\n%s\n" % self.__dict2msg(msg), - - def uri_done(self, msg): - print "201 URI Done\n%s\n" % self.__dict2msg(msg), - - def uri_failure(self, msg): - print "400 URI Failure\n%s\n" % self.__dict2msg(msg), - - def run(self): - """Loop through requests on stdin""" - while True: - msg = self.__get_next_msg() - if msg == None: - return 0 - if msg['_number'] == 600: - try: - self.fetch(msg) - except Exception, e: - self.fail(e.__class__.__name__ + ": " + str(e)) - except up2dateErrors.Error, e: - self.fail(e.__class__.__name__ + ": " + str(e)) - else: - return 100 - - - -def get_ssl_ca_cert(up2date_cfg): - if not (up2date_cfg.has_key('sslCACert') and up2date_cfg['sslCACert']): - raise BadSslCaCertConfig - - ca_certs = up2date_cfg['sslCACert'] - if type(ca_certs) == list: - return ca_certs - return [ca_certs] - - - -class spacewalk_method(pkg_acquire_method): - """ - Spacewalk acquire method - """ - up2date_cfg = None - login_info = None - current_url = None - svr_channels = None - http_headers = None - base_channel = None - conn = None - not_registered_msg = 'This system is not registered with the spacewalk server' - - def fail(self, message = not_registered_msg): - self.uri_failure({'URI': self.uri, - 'Message': message}) - - - def __load_config(self): - if self.up2date_cfg == None: - self.up2date_cfg = config.initUp2dateConfig() - self.up2date_server = urlparse(self.up2date_cfg['serverURL']) - # TODO: proxy settings - - - def __login(self): - if self.login_info == None: - self.status(URI = self.uri, Message = 'Logging into the spacewalk server') - self.login_info = up2dateAuth.getLoginInfo() - if not self.login_info: - raise up2date_client.AuthenticationError(self.not_registered_msg) - self.status(URI = self.uri, Message = 'Logged in') - - - def __init_channels(self): - if self.svr_channels == None: - self.svr_channels = rhnChannel.getChannelDetails() - for channel in self.svr_channels: - if channel['parent_channel'] == '': - self.base_channel = channel['label'] - - - def __init_headers(self): - if self.http_headers == None: - rhn_needed_headers = ['X-RHN-Server-Id', - 'X-RHN-Auth-User-Id', - 'X-RHN-Auth', - 'X-RHN-Auth-Server-Time', - 'X-RHN-Auth-Expire-Offset'] - self.http_headers = {}; - for header in rhn_needed_headers: - if not self.login_info.has_key(header): - raise up2date_client.AuthenticationError( - "Missing required login information %s" % (header)) - self.http_headers[header] = self.login_info[header] - self.http_headers['X-RHN-Transport-Capability'] = 'follow-redirects=3' - - - def __make_conn(self): - if self.conn == None: - if self.up2date_server.scheme == 'http' \ - or self.up2date_cfg['useNoSSLForPackages'] == 1: - self.conn = HTTPConnection(self.up2date_server.netloc) - else: - self.conn = HTTPSConnection(self.up2date_server.netloc, - trusted_certs=get_ssl_ca_cert(self.up2date_cfg)) - - - def __transform_document(self, document): - """Transform url given by apt to real spacewalk url""" - document = document.replace('dists/channels:/main/', - 'dists/channels:/' + self.base_channel + '/', 1) - document = re.sub('/binary-[\d\w]*/', '/repodata/', document, 1) - document = document.replace('dists/channels:/', '/XMLRPC/GET-REQ/', 1) - return document - - - def fetch(self, msg): - """ - Fetch the content from spacewalk server to the file. - - Acording to the apt protocol msg must contain: 'URI' and 'Filename'. - Other possible keys are: 'Last-Modified', 'Index-File', 'Fail-Ignore' - """ - self.uri = msg['URI'] - self.uri_parsed = urlparse(msg['URI']) - self.filename = msg['Filename'] - - self.__load_config() - if self.uri_parsed.netloc != self.up2date_server.netloc: - return self.fail() - self.__login() - self.__init_channels() - - document = self.__transform_document(self.uri_parsed.path) - - self.__init_headers() - self.__make_conn() - - self.conn.request("GET", "/" + document, headers = self.http_headers) - self.status(URI = self.uri, Message = 'Waiting for headers') - - res = self.conn.getresponse() - if res.status != 200: - self.uri_failure({'URI': self.uri, - 'Message': str(res.status) + ' ' + res.reason, - 'FailReason': 'HttpError' + str(res.status)}) - while True: - data = res.read(4096) - if not len(data): break - res.close() - return - - self.uri_start({'URI': self.uri, - 'Size': res.getheader('content-length'), - 'Last-Modified': res.getheader('last-modified')}) - - f = open(self.filename, "w") - hash_sha256 = hashlib.sha256() - hash_md5 = hashlib.md5() - while True: - data = res.read(4096) - if not len(data): - break - hash_sha256.update(data) - hash_md5.update(data) - f.write(data) - res.close() - f.close() - - self.uri_done({'URI': self.uri, - 'Filename': self.filename, - 'Size': res.getheader('content-length'), - 'Last-Modified': res.getheader('last-modified'), - 'MD5-Hash': hash_md5.hexdigest(), - 'MD5Sum-Hash': hash_md5.hexdigest(), - 'SHA256-Hash': hash_sha256.hexdigest()}) - - - def __del__(self): - if self.conn: - self.conn.close() - - - -if __name__ == '__main__': - method = spacewalk_method() - ret = method.run() - sys.exit(ret) - diff --git a/client/debian/apt-spacewalk/debian/apt-spacewalk.install b/client/debian/apt-spacewalk/debian/apt-spacewalk.install new file mode 100644 index 0000000..6819a30 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/apt-spacewalk.install @@ -0,0 +1 @@ +spacewalk.py /usr/lib/apt/methods/ diff --git a/client/debian/apt-spacewalk/debian/changelog b/client/debian/apt-spacewalk/debian/changelog new file mode 100644 index 0000000..8235644 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/changelog @@ -0,0 +1,6 @@ +apt-spacewalk (1.0.0-1) unstable; urgency=low + + * Initial release Package was created. + + -- Miroslav Suchý <miroslav(a)suchy.cz> Mon, 20 Sep 2010 10:38:44 +0200 + diff --git a/client/debian/apt-spacewalk/debian/compat b/client/debian/apt-spacewalk/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/compat @@ -0,0 +1 @@ +7 diff --git a/client/debian/apt-spacewalk/debian/control b/client/debian/apt-spacewalk/debian/control new file mode 100644 index 0000000..96b6a22 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/control @@ -0,0 +1,15 @@ +Source: apt-spacewalk +Section: python +Priority: extra +Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> +Build-Depends: python, debhelper (>= 7.0.50~) +Build-Depends-Indep: python-support (>= 0.8) +Standards-Version: 3.9.1 +Homepage: https://fedorahosted.org/spacewalk + +Package: apt-spacewalk +Architecture: all +Depends: ${python:Depends}, ${misc:Depends}, rhn-client-tools +Provides: ${python:Provides} +Description: Spacewalk transport for apt-get. + This is used to connect to Spacewalk servers. diff --git a/client/debian/apt-spacewalk/debian/copyright b/client/debian/apt-spacewalk/debian/copyright new file mode 100644 index 0000000..98b52fb --- /dev/null +++ b/client/debian/apt-spacewalk/debian/copyright @@ -0,0 +1,21 @@ +apt-spacewalk is copyright 2011 by Red Hat Inc. +apt-spacewalk is currently developed by Spacewalk Development Team <spacewalk-devel(a)redhat.com>. + +License: GPLv2 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + +See /usr/share/common-licenses/GPL-2, or +<http://www.gnu.org/copyleft/gpl.txt> for the terms of the latest version +of the GNU General Public License. diff --git a/client/debian/apt-spacewalk/debian/docs b/client/debian/apt-spacewalk/debian/docs new file mode 100644 index 0000000..a48c3b0 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/docs @@ -0,0 +1,2 @@ +ChangeLog +copyright diff --git a/client/debian/apt-spacewalk/debian/pycompat b/client/debian/apt-spacewalk/debian/pycompat new file mode 100644 index 0000000..0cfbf08 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/pycompat @@ -0,0 +1 @@ +2 diff --git a/client/debian/apt-spacewalk/debian/rules b/client/debian/apt-spacewalk/debian/rules new file mode 100755 index 0000000..e652103 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/rules @@ -0,0 +1,46 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +install: build + dh_testdir + dh_testroot + dh_prep + dh_installdirs -A $(CURDIR)/usr/lib/apt/methods/ + dh_install + +build: build-stamp + +build-stamp: + dh_testdir + touch build-stamp + +clean: + rm -rf build + +binary: binary-indep binary-arch + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installdebconf + dh_installdeb + dh_python + dh_gencontrol + dh_md5sums + dh_builddeb + +.PHONY: build clean binary-indep binary-arch binary install + diff --git a/client/debian/apt-spacewalk/debian/source/format b/client/debian/apt-spacewalk/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/client/debian/apt-spacewalk/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/client/debian/apt-spacewalk/debian/watch b/client/debian/apt-spacewalk/debian/watch new file mode 100644 index 0000000..c76ceee --- /dev/null +++ b/client/debian/apt-spacewalk/debian/watch @@ -0,0 +1,2 @@ +version=3 +https://fedorahosted.org/releases/s/p/spacewalk/rhnlib-(.*)\.tar\.gz diff --git a/client/debian/apt-spacewalk/spacewalk.py b/client/debian/apt-spacewalk/spacewalk.py new file mode 100755 index 0000000..d1faedf --- /dev/null +++ b/client/debian/apt-spacewalk/spacewalk.py @@ -0,0 +1,263 @@ +#!/usr/bin/python -u +# +# Very early prototype of apt-transport-spacewalk +# +# Author: Simon Lukasik <xlukas08 [at] stud.fit.vutbr.cz> +# Date: 2011-01-01 +# License: GPLv2 +# +# + +import sys +import re +import hashlib + +import warnings +warnings.filterwarnings("ignore", message="the md5 module is deprecated; use hashlib instead") +sys.path.append("/usr/share/rhn/") + +from urlparse import urlparse +from rhn.connections import HTTPConnection, HTTPSConnection +from up2date_client import config +from up2date_client import rhnChannel +from up2date_client import up2dateAuth +from up2date_client import up2dateErrors + + + +class pkg_acquire_method: + """ + This is slightly modified python variant of apt-pkg/acquire-method. + It is a skeleton class that implements only very basic of apt methods + functionality. + """ + __eof = False + + def __init__(self): + print "100 Capabilities\nVersion: 1.0\nSingle-Instance: true\n\n", + + def __get_next_msg(self): + """ + Apt uses for communication with its methods the text protocol similar + to http. This function parses the protocol messages from stdin. + """ + if self.__eof: + return None + result = {}; + line = sys.stdin.readline() + if not line: + self.__eof = True + return None + s = line.split(" ", 1) + result['_number'] = int(s[0]) + result['_text'] = s[1].strip() + + while not self.__eof: + line = sys.stdin.readline() + if not line: + self.__eof = True + return result + if line == '\n': + return result + s = line.split(":", 1) + result[s[0]] = s[1].strip() + + def __dict2msg(self, msg): + """Convert dictionary to http like message""" + result = "" + for item in msg.keys(): + if msg[item] != None: + result += item + ": " + msg[item] + "\n" + return result + + def status(self, **kwargs): + print "102 Status\n%s\n" % self.__dict2msg(kwargs), + + def uri_start(self, msg): + print "200 URI Start\n%s\n" % self.__dict2msg(msg), + + def uri_done(self, msg): + print "201 URI Done\n%s\n" % self.__dict2msg(msg), + + def uri_failure(self, msg): + print "400 URI Failure\n%s\n" % self.__dict2msg(msg), + + def run(self): + """Loop through requests on stdin""" + while True: + msg = self.__get_next_msg() + if msg == None: + return 0 + if msg['_number'] == 600: + try: + self.fetch(msg) + except Exception, e: + self.fail(e.__class__.__name__ + ": " + str(e)) + except up2dateErrors.Error, e: + self.fail(e.__class__.__name__ + ": " + str(e)) + else: + return 100 + + + +def get_ssl_ca_cert(up2date_cfg): + if not (up2date_cfg.has_key('sslCACert') and up2date_cfg['sslCACert']): + raise BadSslCaCertConfig + + ca_certs = up2date_cfg['sslCACert'] + if type(ca_certs) == list: + return ca_certs + return [ca_certs] + + + +class spacewalk_method(pkg_acquire_method): + """ + Spacewalk acquire method + """ + up2date_cfg = None + login_info = None + current_url = None + svr_channels = None + http_headers = None + base_channel = None + conn = None + not_registered_msg = 'This system is not registered with the spacewalk server' + + def fail(self, message = not_registered_msg): + self.uri_failure({'URI': self.uri, + 'Message': message}) + + + def __load_config(self): + if self.up2date_cfg == None: + self.up2date_cfg = config.initUp2dateConfig() + self.up2date_server = urlparse(self.up2date_cfg['serverURL']) + # TODO: proxy settings + + + def __login(self): + if self.login_info == None: + self.status(URI = self.uri, Message = 'Logging into the spacewalk server') + self.login_info = up2dateAuth.getLoginInfo() + if not self.login_info: + raise up2date_client.AuthenticationError(self.not_registered_msg) + self.status(URI = self.uri, Message = 'Logged in') + + + def __init_channels(self): + if self.svr_channels == None: + self.svr_channels = rhnChannel.getChannelDetails() + for channel in self.svr_channels: + if channel['parent_channel'] == '': + self.base_channel = channel['label'] + + + def __init_headers(self): + if self.http_headers == None: + rhn_needed_headers = ['X-RHN-Server-Id', + 'X-RHN-Auth-User-Id', + 'X-RHN-Auth', + 'X-RHN-Auth-Server-Time', + 'X-RHN-Auth-Expire-Offset'] + self.http_headers = {}; + for header in rhn_needed_headers: + if not self.login_info.has_key(header): + raise up2date_client.AuthenticationError( + "Missing required login information %s" % (header)) + self.http_headers[header] = self.login_info[header] + self.http_headers['X-RHN-Transport-Capability'] = 'follow-redirects=3' + + + def __make_conn(self): + if self.conn == None: + if self.up2date_server.scheme == 'http' \ + or self.up2date_cfg['useNoSSLForPackages'] == 1: + self.conn = HTTPConnection(self.up2date_server.netloc) + else: + self.conn = HTTPSConnection(self.up2date_server.netloc, + trusted_certs=get_ssl_ca_cert(self.up2date_cfg)) + + + def __transform_document(self, document): + """Transform url given by apt to real spacewalk url""" + document = document.replace('dists/channels:/main/', + 'dists/channels:/' + self.base_channel + '/', 1) + document = re.sub('/binary-[\d\w]*/', '/repodata/', document, 1) + document = document.replace('dists/channels:/', '/XMLRPC/GET-REQ/', 1) + return document + + + def fetch(self, msg): + """ + Fetch the content from spacewalk server to the file. + + Acording to the apt protocol msg must contain: 'URI' and 'Filename'. + Other possible keys are: 'Last-Modified', 'Index-File', 'Fail-Ignore' + """ + self.uri = msg['URI'] + self.uri_parsed = urlparse(msg['URI']) + self.filename = msg['Filename'] + + self.__load_config() + if self.uri_parsed.netloc != self.up2date_server.netloc: + return self.fail() + self.__login() + self.__init_channels() + + document = self.__transform_document(self.uri_parsed.path) + + self.__init_headers() + self.__make_conn() + + self.conn.request("GET", "/" + document, headers = self.http_headers) + self.status(URI = self.uri, Message = 'Waiting for headers') + + res = self.conn.getresponse() + if res.status != 200: + self.uri_failure({'URI': self.uri, + 'Message': str(res.status) + ' ' + res.reason, + 'FailReason': 'HttpError' + str(res.status)}) + while True: + data = res.read(4096) + if not len(data): break + res.close() + return + + self.uri_start({'URI': self.uri, + 'Size': res.getheader('content-length'), + 'Last-Modified': res.getheader('last-modified')}) + + f = open(self.filename, "w") + hash_sha256 = hashlib.sha256() + hash_md5 = hashlib.md5() + while True: + data = res.read(4096) + if not len(data): + break + hash_sha256.update(data) + hash_md5.update(data) + f.write(data) + res.close() + f.close() + + self.uri_done({'URI': self.uri, + 'Filename': self.filename, + 'Size': res.getheader('content-length'), + 'Last-Modified': res.getheader('last-modified'), + 'MD5-Hash': hash_md5.hexdigest(), + 'MD5Sum-Hash': hash_md5.hexdigest(), + 'SHA256-Hash': hash_sha256.hexdigest()}) + + + def __del__(self): + if self.conn: + self.conn.close() + + + +if __name__ == '__main__': + method = spacewalk_method() + ret = method.run() + sys.exit(ret) + commit 2ea147c54a50916c63083491b0b58bf4acf6b763 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 16:52:37 2011 +0100 move debian variant of python-ethtool to client/debian diff --git a/client/debian/python-ethtool-0.5/.pc/.quilt_patches b/client/debian/python-ethtool-0.5/.pc/.quilt_patches new file mode 100644 index 0000000..6857a8d --- /dev/null +++ b/client/debian/python-ethtool-0.5/.pc/.quilt_patches @@ -0,0 +1 @@ +debian/patches diff --git a/client/debian/python-ethtool-0.5/.pc/.quilt_series b/client/debian/python-ethtool-0.5/.pc/.quilt_series new file mode 100644 index 0000000..c206706 --- /dev/null +++ b/client/debian/python-ethtool-0.5/.pc/.quilt_series @@ -0,0 +1 @@ +series diff --git a/client/debian/python-ethtool-0.5/.pc/.version b/client/debian/python-ethtool-0.5/.pc/.version new file mode 100644 index 0000000..0cfbf08 --- /dev/null +++ b/client/debian/python-ethtool-0.5/.pc/.version @@ -0,0 +1 @@ +2 diff --git a/client/debian/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pethtool.8.asciidoc b/client/debian/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pethtool.8.asciidoc new file mode 100644 index 0000000..e69de29 diff --git a/client/debian/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pifconfig.8.asciidoc b/client/debian/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pifconfig.8.asciidoc new file mode 100644 index 0000000..e69de29 diff --git a/client/debian/python-ethtool-0.5/COPYING b/client/debian/python-ethtool-0.5/COPYING new file mode 100644 index 0000000..a43ea21 --- /dev/null +++ b/client/debian/python-ethtool-0.5/COPYING @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 675 Mass Ave, Cambridge, MA 02139, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/client/debian/python-ethtool-0.5/MANIFEST b/client/debian/python-ethtool-0.5/MANIFEST new file mode 100644 index 0000000..fe5d601 --- /dev/null +++ b/client/debian/python-ethtool-0.5/MANIFEST @@ -0,0 +1,16 @@ +COPYING +pethtool.py +pifconfig.py +python-ethtool/ethtool.c +python-ethtool/ethtool-copy.h +python-ethtool/etherinfo.c +python-ethtool/etherinfo_obj.c +python-ethtool/etherinfo_ipv6_obj.c +python-ethtool/etherinfo_struct.h +python-ethtool/etherinfo.h +python-ethtool/etherinfo_obj.h +python-ethtool/etherinfo_ipv6_obj.h +setup.py +rpm/SPECS/python-ethtool.spec +MANIFEST +Makefile diff --git a/client/debian/python-ethtool-0.5/Makefile b/client/debian/python-ethtool-0.5/Makefile new file mode 100644 index 0000000..ce181ee --- /dev/null +++ b/client/debian/python-ethtool-0.5/Makefile @@ -0,0 +1,26 @@ +PACKAGE := python-ethtool +VERSION := $(shell rpm -q --qf '%{VERSION} ' --specfile rpm/SPECS/$(PACKAGE).spec | cut -d' ' -f1) + +rpmdirs: + @[ -d rpm/BUILD ] || mkdir rpm/BUILD + @[ -d rpm/RPMS ] || mkdir rpm/RPMS + @[ -d rpm/SRPMS ] || mkdir rpm/SRPMS + @[ -d rpm/SOURCES ] || mkdir rpm/SOURCES + +bz2: rpmdirs + git archive --format=tar --prefix=$(PACKAGE)-$(VERSION)/ HEAD | \ + bzip2 -9 > rpm/SOURCES/$(PACKAGE)-$(VERSION).tar.bz2 + +install: + python setup.py install --root=$(DESTDIR) + +rpm: bz2 rpmdirs + rpmbuild -ba --define "_topdir $(PWD)/rpm" rpm/SPECS/$(PACKAGE).spec + +bz2dev: rpmdirs + @mkdir -p /tmp/$(PACKAGE)-$(VERSION) + @tar cf - `cat MANIFEST` | (cd /tmp/$(PACKAGE)-$(VERSION) ; tar xf -) + @(cd /tmp; tar cf - $(PACKAGE)-$(VERSION)) | bzip2 -9 > rpm/SOURCES/$(PACKAGE)-$(VERSION).tar.bz2 + +rpmdev: bz2dev rpmdirs + rpmbuild -ba --define "_topdir $(PWD)/rpm" rpm/SPECS/$(PACKAGE).spec diff --git a/client/debian/python-ethtool-0.5/debian/changelog b/client/debian/python-ethtool-0.5/debian/changelog new file mode 100644 index 0000000..4516b6b --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/changelog @@ -0,0 +1,12 @@ +python-ethtool (0.5-1) unstable; urgency=low + + * Packaging for Debian main (Closes: #549323). + + -- Miroslav Suchý <miroslav(a)suchy.cz> Wed, 29 Sep 2010 23:00:00 +0200 + +python-ethtool (0.3-2) unstable; urgency=low + + * Initial release + + -- Lukáš Ďurfina <lukas.durfina(a)gmail.com> Wed, 09 Sep 2009 18:49:50 +0200 + diff --git a/client/debian/python-ethtool-0.5/debian/compat b/client/debian/python-ethtool-0.5/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/compat @@ -0,0 +1 @@ +7 diff --git a/client/debian/python-ethtool-0.5/debian/control b/client/debian/python-ethtool-0.5/debian/control new file mode 100644 index 0000000..7318d89 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/control @@ -0,0 +1,15 @@ +Source: python-ethtool +Section: python +Priority: extra +Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> +Build-Depends: debhelper (>= 7.0.50~), python, python-all-dev, libnl-dev, python-support (>= 0.8), asciidoc +Standards-Version: 3.9.1 +Homepage: http://fedorapeople.org/gitweb?p=dsommers/public_git/python-ethtool.git;a=s… + +Package: python-ethtool +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends} +Description: Ethernet settings python bindings + Python bindings for the ethtool kernel interface, that allows querying and + changing of ethernet card settings, such as speed, port, autonegotiation, + and PCI locations. diff --git a/client/debian/python-ethtool-0.5/debian/copyright b/client/debian/python-ethtool-0.5/debian/copyright new file mode 100644 index 0000000..1696cbf --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/copyright @@ -0,0 +1,38 @@ +This package was debianized by Lukáš Ďurfina <lukas.durfina(a)gmail.com> on +Wed, 09 Sep 2009 18:49:50 +0200. + +It was downloaded from http://git.kernel.org/?p=linux/kernel/git/acme/python-ethtool.git + +Upstream Author(s): + + Arnaldo Carvalho de Melo <acme(a)redhat.com> + David Sommerseth <davids(a)redhat.com> + +Copyright: + + Arnaldo Carvalho de Melo <acme(a)redhat.com> + David Sommerseth <davids(a)redhat.com> + +License: + + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. + +File ethtool-copy.h is copy from gkernel and is licenced under GPLv2. + +The Debian packaging is Copyright 2009, Lukáš Ďurfina <lukas.durfina(a)gmail.com> and +is licensed under the GPL, see above. diff --git a/client/debian/python-ethtool-0.5/debian/install b/client/debian/python-ethtool-0.5/debian/install new file mode 100644 index 0000000..c45faa4 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/install @@ -0,0 +1,2 @@ +pethtool usr/sbin +pifconfig usr/sbin diff --git a/client/debian/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 b/client/debian/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 new file mode 100644 index 0000000..751399e --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 @@ -0,0 +1,155 @@ +Description: Upstream changes introduced in version 0.5-1 + This patch has been created by dpkg-source during the package build. + Here's the last changelog entry, hopefully it gives details on why + those changes were made: + . + python-ethtool (0.5-1) unstable; urgency=low + . + * Packaging for Debian main (Closes: #549323). + . + The person named in the Author field signed this changelog entry. +Author: Miroslav Suchý <miroslav(a)suchy.cz> +Bug-Debian: http://bugs.debian.org/549323 + +--- +The information above should follow the Patch Tagging Guidelines, please +checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here +are templates for supplementary fields that you might want to add: + +Origin: <vendor|upstream|other>, <url of original patch> +Bug: <url in upstream bugtracker> +Bug-Debian: http://bugs.debian.org/<bugnumber> +Bug-Ubuntu: https://launchpad.net/bugs/<bugnumber> +Forwarded: <no|not-needed|url proving that it has been forwarded> +Reviewed-By: <name and email of someone who approved the patch> +Last-Update: <YYYY-MM-DD> + +--- /dev/null ++++ python-ethtool-0.5/man/pifconfig.8.asciidoc +@@ -0,0 +1,42 @@ ++pifconfig(8) ++============ ++ ++NAME ++---- ++pifconfig - display information about a network interface ++ ++ ++SYNOPSIS ++-------- ++pifconfig [INTERFACE] ++ ++ ++DESCRIPTION ++----------- ++ ++This script mimic ifconfig behavior, but is written purely in python ++and python module ethtool. ++ ++ ++OPTIONS ++------- ++ ++INTERFACE:: ++Display information about only this interface. If no interface is given ++then all interfaces are displayed. ++ ++-h, --help:: ++Show help message and exit. ++ ++ ++SEE ALSO ++-------- ++ifconfig(8) ++ ++ ++ ++AUTHORS ++------- ++Arnaldo Carvalho de Melo <acme(a)redhat.com> ++ ++Man page written by Miroslav Suchý <msuchy(a)redhat.com> +--- /dev/null ++++ python-ethtool-0.5/man/pethtool.8.asciidoc +@@ -0,0 +1,81 @@ ++pethtool(8) ++=========== ++ ++NAME ++---- ++pethtool - Display or change ethernet card settings ++ ++ ++SYNOPSIS ++-------- ++pethtool [OPTIONS] [<INTERFACE>] ++ ++ ++DESCRIPTION ++----------- ++ ++This script mimic ethtool behavior, but is written purely in python ++and python module ethtool. ++ ++ ++OPTIONS ++------- ++ ++INTERFACE:: ++Is the name of the ethernet device on which pethtool should operate. ++ ++-h, --help:: ++Show help message and exit. ++ ++-c|--show-coalesce:: ++Show coalesce options ++ ++-C|--coalesce:: ++Set coalesce options ++ ++ adaptive-rx on|off ++ adaptive-tx on|off ++ rx-usecs N ++ rx-frames N ++ rx-usecs-irq N ++ rx-frames-irq N ++ tx-usecs N ++ tx-frames N ++ tx-usecs-irq N ++ tx-frames-irq N ++ stats-block-usecs N ++ pkt-rate-low N ++ rx-usecs-low N ++ rx-frames-low N ++ tx-usecs-low N ++ tx-frames-low N ++ pkt-rate-high N ++ rx-usecs-high N ++ rx-frames-high N ++ tx-usecs-high N ++ tx-frames-high N ++ sample-interval N ++ ++ ++-i|--driver:: ++Show driver information ++ ++-k|--show-offload:: ++Get protocol offload information ++ ++-K|--offload:: ++ Set protocol offload;; ++ [ tso on|off ] ++ ++ ++ ++SEE ALSO ++-------- ++ethtool(8) ++ ++ ++AUTHORS ++------- ++Arnaldo Carvalho de Melo <acme(a)redhat.com> ++ ++Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/client/debian/python-ethtool-0.5/debian/patches/series b/client/debian/python-ethtool-0.5/debian/patches/series new file mode 100644 index 0000000..6e26301 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/patches/series @@ -0,0 +1 @@ +debian-changes-0.5-1 diff --git a/client/debian/python-ethtool-0.5/debian/python-ethtool.manpages b/client/debian/python-ethtool-0.5/debian/python-ethtool.manpages new file mode 100644 index 0000000..2a14e70 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/python-ethtool.manpages @@ -0,0 +1,2 @@ +man/pethtool.8 +man/pifconfig.8 diff --git a/client/debian/python-ethtool-0.5/debian/rules b/client/debian/python-ethtool-0.5/debian/rules new file mode 100755 index 0000000..c5a6480 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/rules @@ -0,0 +1,20 @@ +#!/usr/bin/make -f + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +override_dh_auto_build: + dh_auto_configure --buildsystem=python_distutils + cp -p pethtool.py pethtool + cp -p pifconfig.py pifconfig + a2x -d manpage -f manpage man/pethtool.8.asciidoc + a2x -d manpage -f manpage man/pifconfig.8.asciidoc + +clean: + if [ -f setup.py ]; then dh --buildsystem=python_distutils $@; fi + #rm -f setup.py + rm -f setup.cfg pethtool pifconfig man/pethtool.8 man/pifconfig.8 + rm -rf build + +%: + dh --buildsystem=python_distutils $@ diff --git a/client/debian/python-ethtool-0.5/debian/source/format b/client/debian/python-ethtool-0.5/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/client/debian/python-ethtool-0.5/debian/watch b/client/debian/python-ethtool-0.5/debian/watch new file mode 100644 index 0000000..012eefc --- /dev/null +++ b/client/debian/python-ethtool-0.5/debian/watch @@ -0,0 +1,2 @@ +version=3 +http://dsommers.fedorapeople.org/python-ethtool/python-ethtool-(.*)\.tar\.bz2 diff --git a/client/debian/python-ethtool-0.5/man/pethtool.8.asciidoc b/client/debian/python-ethtool-0.5/man/pethtool.8.asciidoc new file mode 100644 index 0000000..167114a --- /dev/null +++ b/client/debian/python-ethtool-0.5/man/pethtool.8.asciidoc @@ -0,0 +1,81 @@ +pethtool(8) +=========== + +NAME +---- +pethtool - Display or change ethernet card settings + + +SYNOPSIS +-------- +pethtool [OPTIONS] [<INTERFACE>] + + +DESCRIPTION +----------- + +This script mimic ethtool behavior, but is written purely in python +and python module ethtool. + + +OPTIONS +------- + +INTERFACE:: +Is the name of the ethernet device on which pethtool should operate. + +-h, --help:: +Show help message and exit. + +-c|--show-coalesce:: +Show coalesce options + +-C|--coalesce:: +Set coalesce options + + adaptive-rx on|off + adaptive-tx on|off + rx-usecs N + rx-frames N + rx-usecs-irq N + rx-frames-irq N + tx-usecs N + tx-frames N + tx-usecs-irq N + tx-frames-irq N + stats-block-usecs N + pkt-rate-low N + rx-usecs-low N + rx-frames-low N + tx-usecs-low N + tx-frames-low N + pkt-rate-high N + rx-usecs-high N + rx-frames-high N + tx-usecs-high N + tx-frames-high N + sample-interval N + + +-i|--driver:: +Show driver information + +-k|--show-offload:: +Get protocol offload information + +-K|--offload:: + Set protocol offload;; + [ tso on|off ] + + + +SEE ALSO +-------- +ethtool(8) + + +AUTHORS +------- +Arnaldo Carvalho de Melo <acme(a)redhat.com> + +Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/client/debian/python-ethtool-0.5/man/pifconfig.8.asciidoc b/client/debian/python-ethtool-0.5/man/pifconfig.8.asciidoc new file mode 100644 index 0000000..cbd48b8 --- /dev/null +++ b/client/debian/python-ethtool-0.5/man/pifconfig.8.asciidoc @@ -0,0 +1,42 @@ +pifconfig(8) +============ + +NAME +---- +pifconfig - display information about a network interface + + +SYNOPSIS +-------- +pifconfig [INTERFACE] + + +DESCRIPTION +----------- + +This script mimic ifconfig behavior, but is written purely in python +and python module ethtool. + + +OPTIONS +------- + +INTERFACE:: +Display information about only this interface. If no interface is given +then all interfaces are displayed. + +-h, --help:: +Show help message and exit. + + +SEE ALSO +-------- +ifconfig(8) + + + +AUTHORS +------- +Arnaldo Carvalho de Melo <acme(a)redhat.com> + +Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/client/debian/python-ethtool-0.5/pethtool.py b/client/debian/python-ethtool-0.5/pethtool.py new file mode 100755 index 0000000..49d667e --- /dev/null +++ b/client/debian/python-ethtool-0.5/pethtool.py @@ -0,0 +1,380 @@ +#! /usr/bin/python +# -*- python -*- +# -*- coding: utf-8 -*- +# Copyright (C) 2008 Red Hat Inc. +# +# This application is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; version 2. +# +# This application is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +import getopt, ethtool, sys + +def usage(): + print '''Usage: ethtool [OPTIONS] [<interface>] + -h|--help Give this help list + -c|--show-coalesce Show coalesce options + -C|--coalesce Set coalesce options + [adaptive-rx on|off] + [adaptive-tx on|off] + [rx-usecs N] + [rx-frames N] + [rx-usecs-irq N] + [rx-frames-irq N] + [tx-usecs N] + [tx-frames N] + [tx-usecs-irq N] + [tx-frames-irq N] + [stats-block-usecs N] + [pkt-rate-low N] + [rx-usecs-low N] + [rx-frames-low N] + [tx-usecs-low N] + [tx-frames-low N] + [pkt-rate-high N] + [rx-usecs-high N] + [rx-frames-high N] + [tx-usecs-high N] + [tx-frames-high N] + [sample-interval N] + -i|--driver Show driver information + -k|--show-offload Get protocol offload information + -K|--offload Set protocol offload + [ tso on|off ]''' + +tab = "" + +def printtab(msg): + print tab + msg + +all_devices = [] + +ethtool_coalesce_msgs = ( + ( "stats-block-usecs", + "stats_block_coalesce_usecs" ), + ( "sample-interval", + "rate_sample_interval" ), + ( "pkt-rate-low", + "pkt_rate_low"), + ( "pkt-rate-high", + "pkt_rate_high"), + ( "\n" ), + ( "rx-usecs", + "rx_coalesce_usecs"), + ( "rx-frames", + "rx_max_coalesced_frames"), + ( "rx-usecs-irq", + "rx_coalesce_usecs_irq"), + ( "rx-frames-irq", + "rx_max_coalesced_frames_irq"), + ( "\n" ), + ( "tx-usecs", + "tx_coalesce_usecs"), + ( "tx-frames", + "tx_max_coalesced_frames"), + ( "tx-usecs-irq", + "tx_coalesce_usecs_irq"), + ( "tx-frames-irq", + "tx_max_coalesced_frames_irq"), + ( "\n" ), + ( "rx-usecs-low", + "rx_coalesce_usecs_low"), + ( "rx-frame-low", + "rx_max_coalesced_frames_low"), + ( "tx-usecs-low", + "tx_coalesce_usecs_low"), + ( "tx-frame-low", + "tx_max_coalesced_frames_low"), + ( "\n" ), + ( "rx-usecs-high", + "rx_coalesce_usecs_high"), + ( "rx-frame-high", + "rx_max_coalesced_frames_high"), + ( "tx-usecs-high", + "tx_coalesce_usecs_high"), + ( "tx-frame-high", + "tx_max_coalesced_frames_high"), +) + +def get_coalesce_dict_entry(ethtool_name): + if ethtool_name == "adaptive-rx": + return "use_adaptive_rx_coalesce" + + if ethtool_name == "adaptive-tx": + return "use_adaptive_tx_coalesce" + + for name in ethtool_coalesce_msgs: + if name[0] == ethtool_name: + return name[1] + + return None + +def show_coalesce(interface, args = None): + printtab("Coalesce parameters for %s:" % interface) + try: + coal = ethtool.get_coalesce(interface) + except IOError: + printtab(" NOT supported!") + return + + printtab("Adaptive RX: %s TX: %s" % (coal["use_adaptive_rx_coalesce"] and "on" or "off", + coal["use_adaptive_tx_coalesce"] and "on" or "off")) + + printed = [ "use_adaptive_rx_coalesce", + "use_adaptive_tx_coalesce" ] + for tunable in ethtool_coalesce_msgs: + if tunable[0] == '\n': + print + else: + printtab("%s: %s" % (tunable[0], coal[tunable[1]])) + printed.append(tunable[1]) + + coalkeys = coal.keys() + if len(coalkeys) != len(printed): + print + for tunable in coalkeys: + if tunable not in printed: + printtab("%s %s" % (tunable, coal[tunable])) + +def set_coalesce(interface, args): + try: + coal = ethtool.get_coalesce(interface) + except IOError: + printtab("Interrupt coalescing NOT supported on %s!" % interface) + return + + changed = False + args = [a.lower() for a in args] + for arg, value in [ ( args[i], args[i + 1] ) for i in range(0, len(args), 2) ]: + real_arg = get_coalesce_dict_entry(arg) + if not real_arg: + continue + if value == "on": + value = 1 + elif value == "off": + value = 0 + else: + try: + value = int(value) + except: + continue + if coal[real_arg] != value: + coal[real_arg] = value + changed = True + + if not changed: + return + + ethtool.set_coalesce(interface, coal) + +def show_offload(interface, args = None): + try: + sg = ethtool.get_sg(interface) and "on" or "off" + except IOError: + sg = "not supported" + + try: + tso = ethtool.get_tso(interface) and "on" or "off" + except IOError: + tso = "not supported" + + try: + ufo = ethtool.get_ufo(interface) and "on" or "off" + except IOError: + ufo = "not supported" + + try: + gso = ethtool.get_gso(interface) and "on" or "off" + except IOError: + gso = "not supported" + + printtab("scatter-gather: %s" % sg) + printtab("tcp segmentation offload: %s" % tso) + printtab("udp fragmentation offload: %s" % ufo) + printtab("generic segmentation offload: %s" % gso) + +def set_offload(interface, args): + cmd, value = [a.lower() for a in args] + + if cmd == "tso": + value = value == "on" and 1 or 0 + try: + ethtool.set_tso(interface, value) + except: + pass + +ethtool_ringparam_msgs = ( + ( "Pre-set maximums", ), + ( "RX:\t\t", "rx_max_pending" ), + ( "RX Mini:\t", "rx_mini_max_pending" ), + ( "RX Jumbo:\t", "rx_jumbo_max_pending" ), + ( "TX:\t\t", "tx_max_pending" ), + ( "Current hardware settings", ), + ( "RX:\t\t", "rx_pending" ), + ( "RX Mini:\t", "rx_mini_pending" ), + ( "RX Jumbo:\t", "rx_jumbo_pending" ), + ( "TX:\t\t", "tx_pending" ), +) + +def show_ring(interface, args = None): + printtab("Ring parameters for %s:" % interface) + try: + ring = ethtool.get_ringparam(interface) + except IOError: + printtab(" NOT supported!") + return + + printed = [] + for tunable in ethtool_ringparam_msgs: + if len(tunable) == 1: + printtab("%s:" % tunable[0]) + else: + printtab("%s %s" % (tunable[0], ring[tunable[1]])) + printed.append(tunable[1]) + + ringkeys = ring.keys() + if len(ringkeys) != len(printed): + print + for tunable in ringkeys: + if tunable not in printed: + printtab("%s %s" % (tunable, ring[tunable])) + +ethtool_ringparam_map = { + "rx": "rx_pending", + "rx-mini": "rx_mini_pending", + "rx-jumbo": "rx_jumbo_pending", + "tx": "tx_pending", +} + +def set_ringparam(interface, args): + try: + ring = ethtool.get_ringparam(interface) + except IOError: + printtab("ring parameters NOT supported on %s!" % interface) + return + + changed = False + args = [a.lower() for a in args] + for arg, value in [ ( args[i], args[i + 1] ) for i in range(0, len(args), 2) ]: + if not ethtool_ringparam_map.has_key(arg): + continue + try: + value = int(value) + except: + continue + real_arg = ethtool_ringparam_map[arg] + if ring[real_arg] != value: + ring[real_arg] = value + changed = True + + if not changed: + return + + ethtool.set_ringparam(interface, ring) + +def show_driver(interface, args = None): + try: + driver = ethtool.get_module(interface) + except IOError: + driver = "not implemented" + + try: + bus = ethtool.get_businfo(interface) + except IOError: + bus = "not available" + + printtab("driver: %s" % driver) + printtab("bus-info: %s" % bus) + +def run_cmd(cmd, interface, args): + global tab, all_devices + + active_devices = ethtool.get_active_devices() + if not interface: + tab = " " + for interface in all_devices: + inactive = " (not active)" + if interface in active_devices: + inactive = "" + print "%s%s:" % (interface, inactive) + cmd(interface, args) + else: + cmd(interface, args) + +def run_cmd_noargs(cmd, args): + if args: + run_cmd(cmd, args[0], None) + else: + global all_devices + all_devices = ethtool.get_devices() + run_cmd(cmd, None, None) + +def main(): + global all_devices + + try: + opts, args = getopt.getopt(sys.argv[1:], + "hcCgGikK", + ("help", + "show-coalesce", + "coalesce", + "show-ring", + "set-ring", + "driver", + "show-offload", + "offload")) + except getopt.GetoptError, err: + usage() + print str(err) + sys.exit(2) + + if not opts: + usage() + sys.exit(0) + + for o, a in opts: + if o in ("-h", "--help"): + usage() + return + elif o in ("-c", "--show-coalesce"): + run_cmd_noargs(show_coalesce, args) + break + elif o in ("-i", "--driver"): + run_cmd_noargs(show_driver, args) + break + elif o in ("-k", "--show-offload"): + run_cmd_noargs(show_offload, args) + break + elif o in ("-g", "--show-ring"): + run_cmd_noargs(show_ring, args) + break + elif o in ("-K", "--offload", + "-C", "--coalesce", + "-G", "--set-ring"): + all_devices = ethtool.get_devices() + if len(args) < 2: + usage() + sys.exit(1) + + if args[0] not in all_devices: + interface = None + else: + interface = args[0] + args = args[1:] + + if o in ("-K", "--offload"): + cmd = set_offload + elif o in ("-C", "--coalesce"): + cmd = set_coalesce + elif o in ("-G", "--set-ring"): + cmd = set_ringparam + + run_cmd(cmd, interface, args) + break + +if __name__ == '__main__': + main() diff --git a/client/debian/python-ethtool-0.5/pifconfig.py b/client/debian/python-ethtool-0.5/pifconfig.py new file mode 100755 index 0000000..cfaa2a6 --- /dev/null +++ b/client/debian/python-ethtool-0.5/pifconfig.py @@ -0,0 +1,98 @@ +#! /usr/bin/python +# -*- python -*- +# -*- coding: utf-8 -*- +# Copyright (C) 2008 Red Hat Inc. +# +# Arnaldo Carvalho de Melo <acme(a)redhat.com> +# +# This application is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; version 2. +# +# This application is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +import getopt, ethtool, sys + +def usage(): + print '''Usage: + pifconfig <interface> +''' + +def flags2str(flags): + string = "" + if flags & ethtool.IFF_UP: + string += "UP " + if flags & ethtool.IFF_BROADCAST: + string += "BROADCAST " + if flags & ethtool.IFF_DEBUG: + string += "DEBUG " + if flags & ethtool.IFF_LOOPBACK: + string += "LOOPBACK " + if flags & ethtool.IFF_POINTOPOINT: + string += "POINTOPOINT " + if flags & ethtool.IFF_NOTRAILERS: + string += "NOTRAILERS " + if flags & ethtool.IFF_RUNNING: + string += "RUNNING " + if flags & ethtool.IFF_NOARP: + string += "NOARP " + if flags & ethtool.IFF_PROMISC: + string += "PROMISC " + if flags & ethtool.IFF_ALLMULTI: + string += "ALLMULTI " + if flags & ethtool.IFF_MASTER: + string += "MASTER " + if flags & ethtool.IFF_SLAVE: + string += "SLAVE " + if flags & ethtool.IFF_MULTICAST: + string += "MULTICAST " + if flags & ethtool.IFF_PORTSEL: + string += "PORTSEL " + if flags & ethtool.IFF_AUTOMEDIA: + string += "AUTOMEDIA " + if flags & ethtool.IFF_DYNAMIC: + string += "DYNAMIC " + + return string.strip() + +def show_config(device): + ipaddr = ethtool.get_ipaddr(device) + netmask = ethtool.get_netmask(device) + flags = ethtool.get_flags(device) + print '%-9.9s' % device, + if not (flags & ethtool.IFF_LOOPBACK): + print "HWaddr %s" % ethtool.get_hwaddr(device), + print ''' + inet addr:%s''' % ipaddr, + if not (flags & (ethtool.IFF_LOOPBACK | ethtool.IFF_POINTOPOINT)): + print "Bcast:%s" % ethtool.get_broadcast(device), + print ''' Mask:%s + %s +''' % (netmask, flags2str(flags)) + +def main(): + global all_devices + + try: + opts, args = getopt.getopt(sys.argv[1:], + "h", + ("help",)) + except getopt.GetoptError, err: + usage() + print str(err) + sys.exit(2) + + for o, a in opts: + if o in ("-h", "--help"): + usage() + return + + active_devices = ethtool.get_active_devices() + for device in active_devices: + show_config(device) + +if __name__ == '__main__': + main() diff --git a/client/debian/python-ethtool-0.5/python-ethtool/etherinfo.c b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo.c new file mode 100644 index 0000000..41a55fe --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo.c @@ -0,0 +1,333 @@ +/* etherinfo.c - Retrieve ethernet interface info via NETLINK + * + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * Parts of this code is based on ideas and solutions in iproute2 + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <Python.h> +#include <bits/sockaddr.h> +#include <stdio.h> +#include <string.h> +#include <sys/types.h> +#include <unistd.h> +#include <stdlib.h> +#include <asm/types.h> +#include <sys/socket.h> +#include <netlink/route/rtnl.h> +#include <assert.h> +#include <errno.h> +#include "etherinfo_struct.h" +#include "etherinfo.h" + +/* + * + * Internal functions for working with struct etherinfo + * + */ + +/** + * Simple macro which makes sure the destination string is freed if used earlier. + * + * @param dst Destination pointer + * @param src Source pointer + * + */ +#define SET_STR_VALUE(dst, src) { \ + if( dst ) { \ + free(dst); \ + }; \ + dst = strdup(src); \ + } + + +/** + * Frees the memory used by a struct ipv6address pointer chain. All elements are freed + * + * @param ptr Pointer to a struct ipv6address chain. + */ +void free_ipv6addresses(struct ipv6address *ptr) { + struct ipv6address *ipv6ptr = ptr; + + if( !ptr ) { + return; + } + + while( ipv6ptr ) { + struct ipv6address *tmp = ipv6ptr->next; + + if( ipv6ptr->address ) { + free(ipv6ptr->address); + } + free(ipv6ptr); + ipv6ptr = tmp; + } +} + +/** + * Frees the memory used by struct etherinfo, including all struct ipv6address children. + * + * @param ptr Pointer to a struct etherninfo element + */ +void free_etherinfo(struct etherinfo *ptr) +{ + if( ptr == NULL ) { // Just for safety + return; + } + + free(ptr->device); + + if( ptr->hwaddress ) { + free(ptr->hwaddress); + } + if( ptr->ipv4_address ) { + free(ptr->ipv4_address); + } + if( ptr->ipv4_broadcast ) { + free(ptr->ipv4_broadcast); + } + if( ptr->ipv6_addresses ) { + free_ipv6addresses(ptr->ipv6_addresses); + } + free(ptr); +} + + +/** + * Add a new IPv6 address record to a struct ipv6address chain + * + * @param addrptr Pointer to the current IPv6 address chain. + * @param addr IPv6 address, represented as char * string + * @param netmask IPv6 netmask, as returned by libnl rtnl_addr_get_prefixlen() + * @param scope IPV6 address scope, as returned by libnl rtnl_addr_get_scope() + * + * @return Returns a new pointer to the chain containing the new element + */ +struct ipv6address * etherinfo_add_ipv6(struct ipv6address *addrptr, const char *addr, int netmask, int scope) { + struct ipv6address *newaddr = NULL; + + newaddr = calloc(1, sizeof(struct ipv6address)+2); + if( !newaddr ) { + fprintf(stderr, "** ERROR ** Could not allocate memory for a new IPv6 address record (%s/%i [%i])", + addr, netmask, scope); + return addrptr; + } + + SET_STR_VALUE(newaddr->address, addr); + newaddr->netmask = netmask; + newaddr->scope = scope; + newaddr->next = addrptr; + return newaddr; +} + + +/** + * libnl callback function. Does the real parsing of a record returned by NETLINK. This function + * parses LINK related packets + * + * @param obj Pointer to a struct nl_object response + * @param arg Pointer to a struct etherinfo element where the parse result will be saved + */ +static void callback_nl_link(struct nl_object *obj, void *arg) +{ + struct etherinfo *ethi = (struct etherinfo *) arg; + struct rtnl_link *link = (struct rtnl_link *) obj; + struct nl_addr *addr = rtnl_link_get_addr(link); + unsigned int i, len; + unsigned char *binaddr; + char hwaddr[130], *ptr; + + if( (ethi == NULL) || (ethi->hwaddress != NULL) ) { + return; + } + + binaddr = nl_addr_get_binary_addr(addr); + memset(&hwaddr, 0, 130); + len = 20; + ptr = (char *)&hwaddr; + for( i = 0; i < 6; i++ ) { + if( i == 0 ) { + snprintf(ptr, len, "%02X", *(binaddr+i)); + len -= 2; + ptr += 2; + } else { + snprintf(ptr, len, ":%02X", *(binaddr+i)); + len -= 3; + ptr += 3; + } + } + SET_STR_VALUE(ethi->hwaddress, hwaddr); +} + + +/** + * libnl callback function. Does the real parsing of a record returned by NETLINK. This function + * parses ADDRESS related packets + * + * @param obj Pointer to a struct nl_object response + * @param arg Pointer to a struct etherinfo element where the parse result will be saved + */ +static void callback_nl_address(struct nl_object *obj, void *arg) +{ + struct etherinfo *ethi = (struct etherinfo *) arg; + struct nl_addr *addr; + char ip_str[66]; + int family; + + if( ethi == NULL ) { + return; + } + + addr = rtnl_addr_get_local((struct rtnl_addr *)obj); + family = nl_addr_get_family(addr); + switch( family ) { + case AF_INET: + case AF_INET6: + memset(&ip_str, 0, 66); + inet_ntop(family, nl_addr_get_binary_addr(addr), (char *)&ip_str, 64); + + if( family == AF_INET ) { + struct nl_addr *brdcst = rtnl_addr_get_broadcast((struct rtnl_addr *)obj); + char brdcst_str[66]; + + SET_STR_VALUE(ethi->ipv4_address, ip_str); + ethi->ipv4_netmask = rtnl_addr_get_prefixlen((struct rtnl_addr*) obj); + + if( brdcst ) { + memset(&brdcst_str, 0, 66); + inet_ntop(family, nl_addr_get_binary_addr(brdcst), (char *)&brdcst_str, 64); + SET_STR_VALUE(ethi->ipv4_broadcast, brdcst_str); + } + } else { + ethi->ipv6_addresses = etherinfo_add_ipv6(ethi->ipv6_addresses, + ip_str, + rtnl_addr_get_prefixlen((struct rtnl_addr*) obj), + rtnl_addr_get_scope((struct rtnl_addr*) obj)); + } + return; + default: + return; + } +} + + + +/* + * + * Exported functions - API frontend + * + */ + +/** + * Dumps the contents of a struct etherinfo element to file + * + * @param fp FILE pointer where to dump + * @param ptr Pointer to a struct etherinfo element + */ +void dump_etherinfo(FILE *fp, struct etherinfo *ptr) +{ + + fprintf(fp, "*** Interface [%i] %s ", ptr->index, ptr->device); + if( ptr->hwaddress ) { + fprintf(fp, "MAC address: %s", ptr->hwaddress); + } + fprintf(fp, "\n"); + if( ptr->ipv4_address ) { + fprintf(fp, "\tIPv4 Address: %s/%i", + ptr->ipv4_address, ptr->ipv4_netmask); + if( ptr->ipv4_broadcast ) { + fprintf(fp, " - Broadcast: %s", ptr->ipv4_broadcast); + } + fprintf(fp, "\n"); + } + if( ptr->ipv6_addresses ) { + struct ipv6address *ipv6 = ptr->ipv6_addresses; + + fprintf(fp, "\tIPv6 addresses:\n"); + for(; ipv6; ipv6 = ipv6->next) { + char scope[66]; + + rtnl_scope2str(ipv6->scope, scope, 64); + fprintf(fp, "\t [%s] %s/%i\n", + scope, ipv6->address, ipv6->netmask); + } + } + fprintf(fp, "\n"); +} + + +/** + * Query NETLINK for ethernet configuration + * + * @param ethinf Pointer to an available struct etherinfo element. The 'device' member + * must contain a valid string to the device to query for information + * @param nlc Pointer to the libnl handle, which is used for the query against NETLINK + * @param query What to query for. Must be NLQRY_LINK or NLQRY_ADDR. + * + * @return Returns 1 on success, otherwise 0. + */ +int get_etherinfo(struct etherinfo *ethinf, struct nl_handle *nlc, nlQuery query) +{ + struct nl_cache *link_cache; + struct nl_cache *addr_cache; + struct rtnl_addr *addr; + struct rtnl_link *link; + int ret = 0; + + if( !ethinf || !nlc ) { + return 0; + } + + /* Find the interface index we're looking up. + * As we don't expect it to change, we're reusing a "cached" + * interface index if we have that + */ + if( ethinf->index < 0 ) { + link_cache = rtnl_link_alloc_cache(nlc); + ethinf->index = rtnl_link_name2i(link_cache, ethinf->device); + if( ethinf->index < 0 ) { + return 0; + } + nl_cache_free(link_cache); + } + + /* Query the for requested info vai NETLINK */ + switch( query ) { + case NLQRY_LINK: + /* Extract MAC/hardware address of the interface */ + link_cache = rtnl_link_alloc_cache(nlc); + link = rtnl_link_alloc(); + rtnl_link_set_ifindex(link, ethinf->index); + nl_cache_foreach_filter(link_cache, (struct nl_object *)link, callback_nl_link, ethinf); + rtnl_link_put(link); + nl_cache_free(link_cache); + ret = 1; + break; + + case NLQRY_ADDR: + /* Extract IP address information */ + addr_cache = rtnl_addr_alloc_cache(nlc); + addr = rtnl_addr_alloc(); + rtnl_addr_set_ifindex(addr, ethinf->index); + nl_cache_foreach_filter(addr_cache, (struct nl_object *)addr, callback_nl_address, ethinf); + rtnl_addr_put(addr); + nl_cache_free(addr_cache); + ret = 1; + break; + + default: + ret = 0; + } + return ret; +} + diff --git a/client/debian/python-ethtool-0.5/python-ethtool/etherinfo.h b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo.h new file mode 100644 index 0000000..db368db --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo.h @@ -0,0 +1,35 @@ +/* etherinfo.h - Retrieve ethernet interface info via NETLINK + * + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _ETHERINFO_H +#define _ETHERINFO_H + +#include <netlink/addr.h> +#include <netlink/netlink.h> +#include <netlink/handlers.h> +#include <netlink/route/link.h> +#include <netlink/route/addr.h> +#include <arpa/inet.h> + +typedef enum {NLQRY_LINK, NLQRY_ADDR} nlQuery; /**< Supported query types in the etherinfo code */ + +int get_etherinfo(struct etherinfo *ethinf, struct nl_handle *nlc, nlQuery query); +void free_etherinfo(struct etherinfo *ptr); +void dump_etherinfo(FILE *, struct etherinfo *); + +void free_ipv6addresses(struct ipv6address *ptr); + +#endif diff --git a/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c new file mode 100644 index 0000000..fb751d4 --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c @@ -0,0 +1,230 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/** + * @file etherinfo_ipv6_obj.c + * @author David Sommerseth <davids(a)redhat.com> + * @date Thu Jul 29 17:51:28 2010 + * + * @brief Python ethtool.etherinfo class functions. + * + */ + +#include <Python.h> +#include "structmember.h" + +#include <netlink/route/rtnl.h> +#include "etherinfo_struct.h" +#include "etherinfo.h" + + +/** + * ethtool.etherinfo_ipv6addr deallocator - cleans up when a object is deleted + * + * @param self etherinfo_ipv6addr_py object structure + */ +void _ethtool_etherinfo_ipv6_dealloc(etherinfo_ipv6addr_py *self) +{ + if( self->addrdata ) { + free_ipv6addresses(self->addrdata); + } + self->ob_type->tp_free((PyObject*)self); +} + + +/** + * ethtool.etherinfo_ipv6addr function, creating a new etherinfo object + * + * @param type + * @param args + * @param kwds + * + * @return Returns in PyObject with the new object on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_ipv6_new(PyTypeObject *type, PyObject *args, PyObject *kwds) +{ + etherinfo_ipv6addr_py *self; + + self = (etherinfo_ipv6addr_py *)type->tp_alloc(type, 0); + return (PyObject *)self; +} + + +/** + * ethtool.etherinfo_ipv6addr init (constructor) method. Makes sure the object is initialised correctly. + * + * @param self + * @param args + * @param kwds + * + * @return Returns 0 on success. + */ +int _ethtool_etherinfo_ipv6_init(etherinfo_ipv6addr_py *self, PyObject *args, PyObject *kwds) +{ + static char *etherinfo_kwlist[] = {"etherinfo_ipv6_ptr", NULL}; + PyObject *ethinf_ptr = NULL; + + if( !PyArg_ParseTupleAndKeywords(args, kwds, "O", etherinfo_kwlist, &ethinf_ptr)) { + PyErr_SetString(PyExc_AttributeError, "Invalid data pointer to constructor"); + return -1; + } + self->addrdata = (struct ipv6address *) PyCObject_AsVoidPtr(ethinf_ptr); + return 0; +} + +/** + * ethtool.etherinfo_ipv6addr function for retrieving data from a Python object. + * + * @param self + * @param attr_o contains the object member request (which element to return) + * + * @return Returns a PyObject with the value requested on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_ipv6_getter(etherinfo_ipv6addr_py *self, PyObject *attr_o) +{ + PyObject *ret; + char *attr = PyString_AsString(attr_o); + + if( !self || !self->addrdata ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + if( strcmp(attr, "address") == 0 ) { + ret = RETURN_STRING(self->addrdata->address); + } else if( strcmp(attr, "netmask") == 0 ) { + ret = PyInt_FromLong(self->addrdata->netmask); + } else if( strcmp(attr, "scope") == 0 ) { + char scope[66]; + + rtnl_scope2str(self->addrdata->scope, scope, 66); + ret = PyString_FromString(scope); + } else { + ret = PyObject_GenericGetAttr((PyObject *)self, attr_o); + } + return ret; +} + + +/** + * ethtool.etherinfo_ipv6addr function for setting a value to a object member. This feature is + * disabled by always returning -1, as the values are read-only by the user. + * + * @param self + * @param attr_o + * @param val_o + * + * @return Returns always -1 (failure). + */ +int _ethtool_etherinfo_ipv6_setter(etherinfo_ipv6addr_py *self, PyObject *attr_o, PyObject *val_o) +{ + PyErr_SetString(PyExc_AttributeError, "etherinfo_ipv6addr member values are read-only."); + return -1; +} + + +/** + * Creates a human readable format of the information when object is being treated as a string + * + * @param self + * + * @return Returns a PyObject with a string with all of the information + */ +PyObject *_ethtool_etherinfo_ipv6_str(etherinfo_ipv6addr_py *self) +{ + char scope[66]; + + if( !self || !self->addrdata ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + rtnl_scope2str(self->addrdata->scope, scope, 64); + return PyString_FromFormat("[%s] %s/%i", + scope, + self->addrdata->address, + self->addrdata->netmask); +} + + +/** + * This is required by Python, which lists all accessible methods + * in the object. But no methods are provided. + * + */ +static PyMethodDef _ethtool_etherinfo_ipv6_methods[] = { + {NULL} /**< No methods defined */ +}; + +/** + * Defines all accessible object members + * + */ +static PyMemberDef _ethtool_etherinfo_ipv6_members[] = { + {"address", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, + "IPv6 address"}, + {"netmask", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, + "IPv6 netmask"}, + {"scope", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, + "IPv6 IP address scope"}, + {NULL} /* End of member list */ +}; + +/** + * Definition of the functions a Python class/object requires. + * + */ +PyTypeObject ethtool_etherinfoIPv6Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "ethtool.etherinfo_ipv6addr", /*tp_name*/ + sizeof(etherinfo_ipv6addr_py), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + (destructor)_ethtool_etherinfo_ipv6_dealloc,/*tp_dealloc*/ + 0, /*tp_print*/ + 0, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash */ + 0, /*tp_call*/ + (reprfunc)_ethtool_etherinfo_ipv6_str, /*tp_str*/ + (getattrofunc)_ethtool_etherinfo_ipv6_getter, /*tp_getattro*/ + (setattrofunc)_ethtool_etherinfo_ipv6_setter, /*tp_setattro*/ + 0, /*tp_as_buffer*/ + Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ + "IPv6 address information", /* tp_doc */ + 0, /* tp_traverse */ + 0, /* tp_clear */ + 0, /* tp_richcompare */ + 0, /* tp_weaklistoffset */ + 0, /* tp_iter */ + 0, /* tp_iternext */ + _ethtool_etherinfo_ipv6_methods, /* tp_methods */ + _ethtool_etherinfo_ipv6_members, /* tp_members */ + 0, /* tp_getset */ + 0, /* tp_base */ + 0, /* tp_dict */ + 0, /* tp_descr_get */ + 0, /* tp_descr_set */ + 0, /* tp_dictoffset */ + (initproc)_ethtool_etherinfo_ipv6_init, /* tp_init */ + 0, /* tp_alloc */ + _ethtool_etherinfo_ipv6_new, /* tp_new */ +}; + diff --git a/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.c b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.c new file mode 100644 index 0000000..04eb634 --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.c @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + + +/** + * @file etherinfo_obj.c + * @author David Sommerseth <davids(a)redhat.com> + * @date Fri Sep 4 18:41:28 2009 + * + * @brief Python ethtool.etherinfo class functions. + * + */ + +#include <Python.h> +#include "structmember.h" + +#include <netlink/route/rtnl.h> +#include "etherinfo_struct.h" +#include "etherinfo.h" + +extern PyTypeObject ethtool_etherinfoIPv6Type; + +/** + * ethtool.etherinfo deallocator - cleans up when a object is deleted + * + * @param self etherinfo_py object structure + */ +void _ethtool_etherinfo_dealloc(etherinfo_py *self) +{ + if( self->data ) { + if( self->data->ethinfo ) { + free_etherinfo(self->data->ethinfo); + } + free(self->data); + } + self->ob_type->tp_free((PyObject*)self); +} + + +/** + * ethtool.etherinfo function, creating a new etherinfo object + * + * @param type + * @param args + * @param kwds + * + * @return Returns in PyObject with the new object on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_new(PyTypeObject *type, PyObject *args, PyObject *kwds) +{ + etherinfo_py *self; + + self = (etherinfo_py *)type->tp_alloc(type, 0); + return (PyObject *)self; +} + + +/** + * ethtool.etherinfo init (constructor) method. Makes sure the object is initialised correctly. + * + * @param self + * @param args + * @param kwds + * + * @return Returns 0 on success. + */ +int _ethtool_etherinfo_init(etherinfo_py *self, PyObject *args, PyObject *kwds) +{ + static char *etherinfo_kwlist[] = {"etherinfo_ptr", NULL}; + PyObject *ethinf_ptr = NULL; + + if( !PyArg_ParseTupleAndKeywords(args, kwds, "O", etherinfo_kwlist, &ethinf_ptr)) { + PyErr_SetString(PyExc_AttributeError, "Invalid data pointer to constructor"); + return -1; + } + self->data = (struct etherinfo_obj_data *) PyCObject_AsVoidPtr(ethinf_ptr); + return 0; +} + +/** + * ethtool.etherinfo function for retrieving data from a Python object. + * + * @param self + * @param attr_o contains the object member request (which element to return) + * + * @return Returns a PyObject with the value requested on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_getter(etherinfo_py *self, PyObject *attr_o) +{ + PyObject *ret; + char *attr = PyString_AsString(attr_o); + + if( !self || !self->data ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + if( strcmp(attr, "device") == 0 ) { + ret = RETURN_STRING(self->data->ethinfo->device); + } else if( strcmp(attr, "mac_address") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_LINK); + ret = RETURN_STRING(self->data->ethinfo->hwaddress); + } else if( strcmp(attr, "ipv4_address") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ret = RETURN_STRING(self->data->ethinfo->ipv4_address); + } else if( strcmp(attr, "ipv4_netmask") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ret = PyInt_FromLong(self->data->ethinfo->ipv4_netmask); + } else if( strcmp(attr, "ipv4_broadcast") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ret = RETURN_STRING(self->data->ethinfo->ipv4_broadcast); + } else { + ret = PyObject_GenericGetAttr((PyObject *)self, attr_o); + } + return ret; +} + +/** + * ethtool.etherinfo function for setting a value to a object member. This feature is + * disabled by always returning -1, as the values are read-only by the user. + * + * @param self + * @param attr_o + * @param val_o + * + * @return Returns always -1 (failure). + */ +int _ethtool_etherinfo_setter(etherinfo_py *self, PyObject *attr_o, PyObject *val_o) +{ + PyErr_SetString(PyExc_AttributeError, "etherinfo member values are read-only."); + return -1; +} + + +/** + * Creates a human readable format of the information when object is being treated as a string + * + * @param self + * + * @return Returns a PyObject with a string with all of the information + */ +PyObject *_ethtool_etherinfo_str(etherinfo_py *self) +{ + PyObject *ret = NULL; + + if( !self || !self->data || !self->data->nlc || !self->data->ethinfo ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_LINK); + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + + ret = PyString_FromFormat("Device %s:\n", self->data->ethinfo->device); + if( self->data->ethinfo->hwaddress ) { + PyObject *tmp = PyString_FromFormat("\tMAC address: %s\n", self->data->ethinfo->hwaddress); + PyString_Concat(&ret, tmp); + } + + if( self->data->ethinfo->ipv4_address ) { + PyObject *tmp = PyString_FromFormat("\tIPv4 address: %s/%i", + self->data->ethinfo->ipv4_address, + self->data->ethinfo->ipv4_netmask); + if( self->data->ethinfo->ipv4_broadcast ) { + PyObject *tmp2 = PyString_FromFormat(" Broadcast: %s", + self->data->ethinfo->ipv4_broadcast); + PyString_Concat(&tmp, tmp2); + } + PyString_Concat(&tmp, PyString_FromString("\n")); + PyString_Concat(&ret, tmp); + } + + if( self->data->ethinfo->ipv6_addresses ) { + struct ipv6address *ipv6 = self->data->ethinfo->ipv6_addresses; + PyObject *tmp = PyString_FromFormat("\tIPv6 addresses:\n"); + PyString_Concat(&ret, tmp); + + for( ; ipv6; ipv6 = ipv6->next) { + char scope[66]; + + rtnl_scope2str(ipv6->scope, scope, 64); + PyObject *addr = PyString_FromFormat("\t [%s] %s/%i\n", + scope, ipv6->address, ipv6->netmask); + PyString_Concat(&ret, addr); + } + } + return ret; +} + + +/** + * Returns a tuple list of ethertool.etherinfo_ipv6addr objects, containing configured + * IPv6 addresses + * + * @param self + * @param notused + * + * @return Returns a Python tuple list of ethertool.etherinfo_ipv6addr objects + */ +PyObject * _ethtool_etherinfo_get_ipv6_addresses(etherinfo_py *self, PyObject *notused) { + PyObject *ret; + struct ipv6address *ipv6 = NULL; + int i = 0; + + if( !self || !self->data ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ipv6 = self->data->ethinfo->ipv6_addresses; + ret = PyTuple_New(1); + while( ipv6 ) { + PyObject *ipv6_pyobj = NULL, *ipv6_pydata = NULL, *args = NULL; + struct ipv6address *next = ipv6->next; + + ipv6->next = NULL; + ipv6_pydata = PyCObject_FromVoidPtr(ipv6, NULL); + args = PyTuple_New(1); + PyTuple_SetItem(args, 0, ipv6_pydata); + ipv6_pyobj = PyObject_CallObject((PyObject *)&ethtool_etherinfoIPv6Type, args); + if( ipv6_pyobj ) { + PyTuple_SetItem(ret, i++, ipv6_pyobj); + _PyTuple_Resize(&ret, i+1); + Py_INCREF(ipv6_pyobj); + } + ipv6 = next; + } + _PyTuple_Resize(&ret, i); + return ret; +} + + +/** + * Defines all available methods in the ethtool.etherinfo class + * + */ +static PyMethodDef _ethtool_etherinfo_methods[] = { + {"get_ipv6_addresses", _ethtool_etherinfo_get_ipv6_addresses, METH_NOARGS, + "Retrieve configured IPv6 addresses. Returns a tuple list of etherinfo_ipv6addr objects"}, + {NULL} /**< No methods defined */ +}; + +/** + * Defines all accessible object members + * + */ +static PyMemberDef _ethtool_etherinfo_members[] = { + {"device", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "Device name of the interface"}, + {"mac_address", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "MAC address / hardware address of the interface"}, + {"ipv4_address", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "IPv4 address"}, + {"ipv4_netmask", T_INT, offsetof(etherinfo_py, data), 0, + "IPv4 netmask in bits"}, + {"ipv4_broadcast", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "IPv4 broadcast address"}, + {NULL} /* End of member list */ +}; + +/** + * Definition of the functions a Python class/object requires. + * + */ +PyTypeObject ethtool_etherinfoType = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "ethtool.etherinfo", /*tp_name*/ + sizeof(etherinfo_py), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + (destructor)_ethtool_etherinfo_dealloc,/*tp_dealloc*/ + 0, /*tp_print*/ + 0, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash */ + 0, /*tp_call*/ + (reprfunc)_ethtool_etherinfo_str, /*tp_str*/ + (getattrofunc)_ethtool_etherinfo_getter, /*tp_getattro*/ + (setattrofunc)_ethtool_etherinfo_setter, /*tp_setattro*/ + 0, /*tp_as_buffer*/ + Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ + "Contains information about a specific ethernet device", /* tp_doc */ + 0, /* tp_traverse */ + 0, /* tp_clear */ + 0, /* tp_richcompare */ + 0, /* tp_weaklistoffset */ + 0, /* tp_iter */ + 0, /* tp_iternext */ + _ethtool_etherinfo_methods, /* tp_methods */ + _ethtool_etherinfo_members, /* tp_members */ + 0, /* tp_getset */ + 0, /* tp_base */ + 0, /* tp_dict */ + 0, /* tp_descr_get */ + 0, /* tp_descr_set */ + 0, /* tp_dictoffset */ + (initproc)_ethtool_etherinfo_init, /* tp_init */ + 0, /* tp_alloc */ + _ethtool_etherinfo_new, /* tp_new */ +}; + diff --git a/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.h b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.h new file mode 100644 index 0000000..ce77f79 --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_obj.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/** + * @file etherinfo_obj.c + * @author David Sommerseth <davids(a)redhat.com> + * @date Fri Sep 4 18:41:28 2009 + * + * @brief Python ethtool.etherinfo class functions (header file). + * + */ + +#ifndef __ETHERINFO_OBJ_H +#define __ETHERINFO_OBJ_H + +#include <Python.h> +#include "etherinfo_struct.h" + +void _ethtool_etherinfo_dealloc(etherinfo_py *); +PyObject *_ethtool_etherinfo_new(PyTypeObject *, PyObject *, PyObject *); +int _ethtool_etherinfo_init(etherinfo_py *, PyObject *, PyObject *); +PyObject *_ethtool_etherinfo_getter(etherinfo_py *, PyObject *); +int _ethtool_etherinfo_setter(etherinfo_py *, PyObject *, PyObject *); +PyObject *_ethtool_etherinfo_str(etherinfo_py *self); + +#endif diff --git a/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_struct.h b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_struct.h new file mode 100644 index 0000000..b1d453f --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/etherinfo_struct.h @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/** + * @file etherinfo_struct.h + * @author David Sommerseth <dsommers(a)wsdsommers.usersys.redhat.com> + * @date Fri Sep 4 19:06:06 2009 + * + * @brief Contains the internal ethtool.etherinfo data structure + * + */ + +#ifndef _ETHERINFO_STRUCT_H +#define _ETHERINFO_STRUCT_H + +/** + * Contains IP address information about a particular ethernet device + * + */ +struct etherinfo { + char *device; /**< Device name */ + int index; /**< NETLINK index reference */ + char *hwaddress; /**< HW address / MAC address of device */ + char *ipv4_address; /**< Configured IPv4 address */ + int ipv4_netmask; /**< Configured IPv4 netmask */ + char *ipv4_broadcast; /**< Configured IPv4 broadcast address */ + struct ipv6address *ipv6_addresses; /**< Configured IPv6 addresses (as a pointer chain) */ +}; + + +/** + * Pointer chain with IPv6 addresses associated with a ethernet interface. Used + * by struct etherinfo + */ +struct ipv6address { + char *address; /**< Configured IPv6 address */ + int netmask; /**< Configured IPv6 netmask */ + int scope; /**< Scope for the IPv6 address */ + struct ipv6address *next; /**< Pointer to next configured IPv6 address */ +}; + + +/** + * Contains the internal data structure of the + * ethtool.etherinfo object. + * + */ +struct etherinfo_obj_data { + struct nl_handle *nlc; /**< Contains NETLINK connection info */ + struct etherinfo *ethinfo; /**< Contains info about our current interface */ +}; + +/** + * A Python object of struct etherinfo_obj_data + * + */ +typedef struct { + PyObject_HEAD + struct etherinfo_obj_data *data; /* IPv4 and IPv6 address information, only one element used */ +} etherinfo_py; + +/** + * A Python object of struct ipv6address + * + */ +typedef struct { + PyObject_HEAD + struct ipv6address *addrdata; /**< IPv6 address, only one element is used in this case */ +} etherinfo_ipv6addr_py; + +/** + * NULL safe PyString_FromString() wrapper. If input string is NULL, None will be returned + * + * @param str Input C string (char *) + * + * @return Returns a PyObject with either the input string wrapped up, or a Python None value. + */ +#define RETURN_STRING(str) (str ? PyString_FromString(str) : Py_None) + +#endif diff --git a/client/debian/python-ethtool-0.5/python-ethtool/ethtool-copy.h b/client/debian/python-ethtool-0.5/python-ethtool/ethtool-copy.h new file mode 100644 index 0000000..e5b7832 --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/ethtool-copy.h @@ -0,0 +1,373 @@ +/* + * ethtool.h: Defines for Linux ethtool. + * + * Copyright (C) 1998 David S. Miller (davem(a)redhat.com) + * Copyright 2001 Jeff Garzik <jgarzik(a)mandrakesoft.com> + * Portions Copyright 2001 Sun Microsystems (thockin(a)sun.com) + * Portions Copyright 2002 Intel (eli.kupermann(a)intel.com, + * christopher.leech(a)intel.com, + * scott.feldman(a)intel.com) + */ + +#ifndef _LINUX_ETHTOOL_H +#define _LINUX_ETHTOOL_H + +#ifndef __unused +#define __unused __attribute__ ((unused)) +#endif + +/* This should work for both 32 and 64 bit userland. */ +struct ethtool_cmd { + u32 cmd; + u32 supported; /* Features this interface supports */ + u32 advertising; /* Features this interface advertises */ + u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + u8 duplex; /* Duplex, half or full */ + u8 port; /* Which connector port */ + u8 phy_address; + u8 transceiver; /* Which tranceiver to use */ + u8 autoneg; /* Enable or disable autonegotiation */ + u32 maxtxpkt; /* Tx pkts before generating tx int */ + u32 maxrxpkt; /* Rx pkts before generating rx int */ + u32 reserved[4]; +}; + +#define ETHTOOL_BUSINFO_LEN 32 +/* these strings are set to whatever the driver author decides... */ +struct ethtool_drvinfo { + u32 cmd; + char driver[32]; /* driver short name, "tulip", "eepro100" */ + char version[32]; /* driver version string */ + char fw_version[32]; /* firmware version string, if applicable */ + char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ + /* For PCI devices, use pci_dev->slot_name. */ + char reserved1[32]; + char reserved2[16]; + u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + u32 testinfo_len; + u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ + u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ +}; + +#define SOPASS_MAX 6 +/* wake-on-lan settings */ +struct ethtool_wolinfo { + u32 cmd; + u32 supported; + u32 wolopts; + u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; + +/* for passing single values */ +struct ethtool_value { + u32 cmd; + u32 data; +}; + +/* for passing big chunks of data */ +struct ethtool_regs { + u32 cmd; + u32 version; /* driver-specific, indicates different chips/revs */ + u32 len; /* bytes */ + u8 data[0]; +}; + +/* for passing EEPROM chunks */ +struct ethtool_eeprom { + u32 cmd; + u32 magic; + u32 offset; /* in bytes */ + u32 len; /* in bytes */ + u8 data[0]; +}; + +/* for configuring coalescing parameters of chip */ +struct ethtool_coalesce { + u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + + /* How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only rx_max_coalesced_frames + * is used. + */ + u32 rx_coalesce_usecs; + + /* How many packets to delay an RX interrupt after + * a packet arrives. If 0, only rx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause RX interrupts to never be + * generated. + */ + u32 rx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being services by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 rx_coalesce_usecs_irq; + u32 rx_max_coalesced_frames_irq; + + /* How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only tx_max_coalesced_frames + * is used. + */ + u32 tx_coalesce_usecs; + + /* How many packets to delay a TX interrupt after + * a packet is sent. If 0, only tx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause TX interrupts to never be + * generated. + */ + u32 tx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being services by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 tx_coalesce_usecs_irq; + u32 tx_max_coalesced_frames_irq; + + /* How many usecs to delay in-memory statistics + * block updates. Some drivers do not have an in-memory + * statistic block, and in such cases this value is ignored. + * This value must not be zero. + */ + u32 stats_block_coalesce_usecs; + + /* Adaptive RX/TX coalescing is an algorithm implemented by + * some drivers to improve latency under low packet rates and + * improve throughput under high packet rates. Some drivers + * only implement one of RX or TX adaptive coalescing. Anything + * not implemented by the driver causes these values to be + * silently ignored. + */ + u32 use_adaptive_rx_coalesce; + u32 use_adaptive_tx_coalesce; + + /* When the packet rate (measured in packets per second) + * is below pkt_rate_low, the {rx,tx}_*_low parameters are + * used. + */ + u32 pkt_rate_low; + u32 rx_coalesce_usecs_low; + u32 rx_max_coalesced_frames_low; + u32 tx_coalesce_usecs_low; + u32 tx_max_coalesced_frames_low; + + /* When the packet rate is below pkt_rate_high but above + * pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ + + /* When the packet rate is (measured in packets per second) + * is above pkt_rate_high, the {rx,tx}_*_high parameters are + * used. + */ + u32 pkt_rate_high; + u32 rx_coalesce_usecs_high; + u32 rx_max_coalesced_frames_high; + u32 tx_coalesce_usecs_high; + u32 tx_max_coalesced_frames_high; + + /* How often to do adaptive coalescing packet rate sampling, + * measured in seconds. Must not be zero. + */ + u32 rate_sample_interval; +}; + +/* for configuring RX/TX ring parameters */ +struct ethtool_ringparam { + u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + u32 rx_max_pending; + u32 rx_mini_max_pending; + u32 rx_jumbo_max_pending; + u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + u32 rx_pending; + u32 rx_mini_pending; + u32 rx_jumbo_pending; + u32 tx_pending; +}; + +/* for configuring link flow control parameters */ +struct ethtool_pauseparam { + u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autonet' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + u32 autoneg; + u32 rx_pause; + u32 tx_pause; +}; + +#define ETH_GSTRING_LEN 32 +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, +}; + +/* for passing string sets for data tagging */ +struct ethtool_gstrings { + u32 cmd; /* ETHTOOL_GSTRINGS */ + u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + u32 len; /* number of strings in the string set */ + u8 data[0]; +}; + +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ + ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ +}; + +/* for requesting NIC test and getting results*/ +struct ethtool_test { + u32 cmd; /* ETHTOOL_TEST */ + u32 flags; /* ETH_TEST_FL_xxx */ + u32 reserved; + u32 len; /* result length, in number of u64 elements */ + u64 data[0]; +}; + +/* for dumping NIC-specific statistics */ +struct ethtool_stats { + u32 cmd; /* ETHTOOL_GSTATS */ + u32 n_stats; /* number of u64's being returned */ + u64 data[0]; +}; + +/* CMDs currently supported */ +#define ETHTOOL_GSET 0x00000001 /* Get settings. */ +#define ETHTOOL_SSET 0x00000002 /* Set settings, privileged. */ +#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers, privileged. */ +#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ +#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options, priv. */ +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv. */ +#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data, priv. */ +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config, priv. */ +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters, priv. */ +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value), priv. */ +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ +#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ +#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ +#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ + +/* compatibility with older code */ +#define SPARC_ETH_GSET ETHTOOL_GSET +#define SPARC_ETH_SSET ETHTOOL_SSET + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) + +/* Indicates what features are advertised by the interface. */ +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) + +/* The following are all involved in forcing a particular link + * mode for the device for setting things. When getting the + * devices settings, these indicate the current mode and whether + * it was foced up into this mode or autonegotiated. + */ + +/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */ +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_10000 10000 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 + +/* Which connector port. */ +#define PORT_TP 0x00 +#define PORT_AUI 0x01 +#define PORT_MII 0x02 +#define PORT_FIBRE 0x03 +#define PORT_BNC 0x04 + +/* Which tranceiver to use. */ +#define XCVR_INTERNAL 0x00 +#define XCVR_EXTERNAL 0x01 +#define XCVR_DUMMY1 0x02 +#define XCVR_DUMMY2 0x03 +#define XCVR_DUMMY3 0x04 + +/* Enable or disable autonegotiation. If this is set to enable, + * the forced link modes above are completely ignored. + */ +#define AUTONEG_DISABLE 0x00 +#define AUTONEG_ENABLE 0x01 + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +#endif /* _LINUX_ETHTOOL_H */ diff --git a/client/debian/python-ethtool-0.5/python-ethtool/ethtool.c b/client/debian/python-ethtool-0.5/python-ethtool/ethtool.c new file mode 100644 index 0000000..feb6917 --- /dev/null +++ b/client/debian/python-ethtool-0.5/python-ethtool/ethtool.c @@ -0,0 +1,1062 @@ +/* + * Copyright (C) 2008-2010 Red Hat Inc. + * + * Arnaldo Carvalho de Melo <acme(a)redhat.com> + * David Sommerseth <davids(a)redhat.com> + * + * First bits from a Red Hat config tool by Harald Hoyer. + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <Python.h> + +#include <errno.h> +#include <stddef.h> +#include <stdint.h> +#include <unistd.h> +#include <sys/socket.h> +#include <net/if.h> +#include <sys/socket.h> +#include <sys/ioctl.h> +#include <sys/types.h> + +#include "etherinfo_struct.h" +#include "etherinfo_obj.h" +#include "etherinfo.h" + +static struct nl_handle *nlconnection = NULL; +extern PyTypeObject ethtool_etherinfoType; +extern PyTypeObject ethtool_etherinfoIPv6Type; + +#ifndef IFF_DYNAMIC +#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ +#endif + +typedef unsigned long long u64; +typedef __uint32_t u32; +typedef __uint16_t u16; +typedef __uint8_t u8; + +#include "ethtool-copy.h" +#include <linux/sockios.h> /* for SIOCETHTOOL */ + +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +#define _PATH_PROCNET_DEV "/proc/net/dev" + +static PyObject *get_active_devices(PyObject *self __unused, PyObject *args __unused) +{ + PyObject *list; + int numreqs = 30; + struct ifconf ifc; + struct ifreq *ifr; + int n; + + /* SIOCGIFCONF currently seems to only work properly on AF_INET sockets + (as of 2.1.128) */ + /* Open control socket. */ + int skfd = socket(AF_INET, SOCK_DGRAM, 0); + + if (skfd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + ifc.ifc_buf = NULL; + for (;;) { + ifc.ifc_len = sizeof(struct ifreq) * numreqs; + ifc.ifc_buf = realloc(ifc.ifc_buf, ifc.ifc_len); + + if (ioctl(skfd, SIOCGIFCONF, &ifc) < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + free(ifc.ifc_buf); + close(skfd); + return NULL; + } + + if (ifc.ifc_len == (int)sizeof(struct ifreq) * numreqs) { + /* assume it overflowed and try again */ + numreqs += 10; + continue; + } + break; + } + + list = PyList_New(0); + ifr = ifc.ifc_req; + for (n = 0; n < ifc.ifc_len; n += sizeof(struct ifreq)) { + if (!(ioctl(skfd, SIOCGIFFLAGS, ifr) < 0)) + if (ifr->ifr_flags & IFF_UP) + PyList_Append(list, PyString_FromString(ifr->ifr_name)); + ifr++; + } + + free(ifc.ifc_buf); + close(skfd); + + return list; +} + +static PyObject *get_devices(PyObject *self __unused, PyObject *args __unused) +{ + char buffer[256]; + char *ret;; + PyObject *list = PyList_New(0); + FILE *fd = fopen(_PATH_PROCNET_DEV, "r"); + + if (fd == NULL) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + /* skip over first two lines */ + ret = fgets(buffer, 256, fd); ret = fgets(buffer, 256, fd); + while (!feof(fd)) { + char *name = buffer; + char *end = buffer; + + if (fgets(buffer, 256, fd) == NULL) + break; + /* find colon */ + while (end && *end != ':') + end++; + *end = 0; /* terminate where colon was */ + while (*name == ' ') + name++; /* skip over leading whitespace if any */ + PyList_Append(list, PyString_FromString(name)); + } + fclose(fd); + return list; +} + +static PyObject *get_hwaddress(PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char hwaddr[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFHWADDR, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(hwaddr, "%02x:%02x:%02x:%02x:%02x:%02x", + (unsigned int)ifr.ifr_hwaddr.sa_data[0] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[1] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[2] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[3] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[4] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[5] % 256); + + return PyString_FromString(hwaddr); +} + +static PyObject *get_ipaddress(PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char ipaddr[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFADDR, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(ipaddr, "%u.%u.%u.%u", + (unsigned int)ifr.ifr_addr.sa_data[2] % 256, + (unsigned int)ifr.ifr_addr.sa_data[3] % 256, + (unsigned int)ifr.ifr_addr.sa_data[4] % 256, + (unsigned int)ifr.ifr_addr.sa_data[5] % 256); + + return PyString_FromString(ipaddr); +} + + +/** + * Retrieves the current information about all interfaces. All interfaces will be + * returned as a list of objects per interface. + * + * @param self Not used + * @param args Python arguments + * + * @return Python list of objects on success, otherwise NULL. + */ +static PyObject *get_interfaces_info(PyObject *self __unused, PyObject *args) { + PyObject *devlist = NULL, *ethinf_py = NULL; + PyObject *inargs = NULL; + char **fetch_devs; + int i = 0, fetch_devs_len = 0; + + if (!PyArg_ParseTuple(args, "|O", &inargs)) { + PyErr_SetString(PyExc_LookupError, + "Argument must be either a string, list or a tuple"); + return NULL; + } + + /* Parse input arguments if we got them */ + if( inargs != NULL ) { + if( PyString_Check(inargs) ) { /* Input argument is just a string */ + fetch_devs_len = 1; + fetch_devs = calloc(1, sizeof(char *)); + fetch_devs[0] = PyString_AsString(inargs); + } else if( PyTuple_Check(inargs) ) { /* Input argument is a tuple list with devices */ + int j = 0; + + fetch_devs_len = PyTuple_Size(inargs); + fetch_devs = calloc(fetch_devs_len+1, sizeof(char *)); + for( i = 0; i < fetch_devs_len; i++ ) { + PyObject *elmt = PyTuple_GetItem(inargs, i); + if( elmt && PyString_Check(elmt) ) { + fetch_devs[j++] = PyString_AsString(elmt); + } + } + fetch_devs_len = j; + } else if( PyList_Check(inargs) ) { /* Input argument is a list with devices */ + int j = 0; + + fetch_devs_len = PyList_Size(inargs); + fetch_devs = calloc(fetch_devs_len+1, sizeof(char *)); + for( i = 0; i < fetch_devs_len; i++ ) { + PyObject *elmt = PyList_GetItem(inargs, i); + if( elmt && PyString_Check(elmt) ) { + fetch_devs[j++] = PyString_AsString(elmt); + } + } + fetch_devs_len = j; + } else { + PyErr_SetString(PyExc_LookupError, + "Argument must be either a string, list or a tuple"); + return NULL; + } + } + + devlist = PyList_New(0); + for( i = 0; i < fetch_devs_len; i++ ) { + struct etherinfo_obj_data *objdata = NULL; + + /* Allocate memory for data structures for each device */ + objdata = calloc(1, sizeof(struct etherinfo_obj_data)); + if( !objdata ) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + objdata->ethinfo = calloc(1, sizeof(struct etherinfo)); + if( !objdata->ethinfo ) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Store the device name and a reference to the NETLINK connection for + * objects to use when quering for device info + */ + objdata->ethinfo->device = strdup(fetch_devs[i]); + objdata->ethinfo->index = -1; + objdata->nlc = nlconnection; /* Global variable */ + + /* Instantiate a new etherinfo object with the device information */ + ethinf_py = PyCObject_FromVoidPtr(objdata, NULL); + if( ethinf_py ) { + /* Prepare the argument list for the object constructor */ + PyObject *args = PyTuple_New(1); + PyTuple_SetItem(args, 0, ethinf_py); + + /* Create the object */ + PyObject *dev = PyObject_CallObject((PyObject *)&ethtool_etherinfoType, args); + if( dev ) { + PyList_Append(devlist, dev); + } + } + } + if( fetch_devs_len > 0 ) { + free(fetch_devs); + } + + return devlist; +} + + +static PyObject *get_flags (PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + char *devname; + int fd, err; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + err = ioctl(fd, SIOCGIFFLAGS, &ifr); + if(err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + return Py_BuildValue("h", ifr.ifr_flags); + + +} +static PyObject *get_netmask (PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char netmask[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFNETMASK, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(netmask, "%u.%u.%u.%u", + (unsigned int)ifr.ifr_netmask.sa_data[2] % 256, + (unsigned int)ifr.ifr_netmask.sa_data[3] % 256, + (unsigned int)ifr.ifr_netmask.sa_data[4] % 256, + (unsigned int)ifr.ifr_netmask.sa_data[5] % 256); + + return PyString_FromString(netmask); +} + +static PyObject *get_broadcast(PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char broadcast[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFBRDADDR, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(broadcast, "%u.%u.%u.%u", + (unsigned int)ifr.ifr_broadaddr.sa_data[2] % 256, + (unsigned int)ifr.ifr_broadaddr.sa_data[3] % 256, + (unsigned int)ifr.ifr_broadaddr.sa_data[4] % 256, + (unsigned int)ifr.ifr_broadaddr.sa_data[5] % 256); + + return PyString_FromString(broadcast); +} + +static PyObject *get_module(PyObject *self __unused, PyObject *args) +{ + struct ethtool_cmd ecmd; + struct ifreq ifr; + int fd, err; + char buf[2048]; + char *devname; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our control structures. */ + memset(&ecmd, 0, sizeof(ecmd)); + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + ifr.ifr_data = (caddr_t) &buf; + ecmd.cmd = ETHTOOL_GDRVINFO; + memcpy(&buf, &ecmd, sizeof(ecmd)); + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCETHTOOL, &ifr); + + if (err < 0) { /* failed? */ + int eno = errno; + FILE *file; + int found = 0; + char driver[100], dev[100]; + close(fd); + + /* Before bailing, maybe it is a PCMCIA/PC Card? */ + file = fopen("/var/lib/pcmcia/stab", "r"); + if (file == NULL) { + sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + return NULL; + } + + while (!feof(file)) { + if (fgets(buf, 2048, file) == NULL) + break; + buf[2047] = '\0'; + if (strncmp(buf, "Socket", 6) != 0) { + if (sscanf(buf, "%*d\t%*s\t%100s\t%*d\t%100s\n", driver, dev) > 0) { + driver[99] = '\0'; + dev[99] = '\0'; + if (strcmp(devname, dev) == 0) { + found = 1; + break; + } + } + } + } + fclose(file); + if (!found) { + sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + return NULL; + } else + return PyString_FromString(driver); + } + + close(fd); + return PyString_FromString(((struct ethtool_drvinfo *)buf)->driver); +} + +static PyObject *get_businfo(PyObject *self __unused, PyObject *args) +{ + struct ethtool_cmd ecmd; + struct ifreq ifr; + int fd, err; + char buf[1024]; + char *devname; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our control structures. */ + memset(&ecmd, 0, sizeof(ecmd)); + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + ifr.ifr_data = (caddr_t) &buf; + ecmd.cmd = ETHTOOL_GDRVINFO; + memcpy(&buf, &ecmd, sizeof(ecmd)); + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCETHTOOL, &ifr); + + if (err < 0) { /* failed? */ + int eno = errno; + close(fd); + + sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + return NULL; + } + + close(fd); + return PyString_FromString(((struct ethtool_drvinfo *)buf)->bus_info); +} + +static int send_command(int cmd, char *devname, void *value) +{ + /* Setup our request structure. */ + int fd, err; + struct ifreq ifr; + struct ethtool_value *eval = value; + + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + ifr.ifr_data = (caddr_t)eval; + eval->cmd = cmd; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0), err; + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return -1; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCETHTOOL, &ifr); + if (err < 0) { + char buf[2048]; + sprintf(buf, "[Errno %d] %s", errno, strerror(errno)); + PyErr_SetString(PyExc_IOError, buf); + } + + close(fd); + return err; +} + +static int get_dev_value(int cmd, PyObject *args, void *value) +{ + char *devname; + int err = -1; + + if (PyArg_ParseTuple(args, "s", &devname)) + err = send_command(cmd, devname, value); + + return err; +} + +static int get_dev_int_value(int cmd, PyObject *args, int *value) +{ + struct ethtool_value eval; + int rc = get_dev_value(cmd, args, &eval); + + if (rc == 0) + *value = *(int *)&eval.data; + + return rc; +} + +static int dev_set_int_value(int cmd, PyObject *args) +{ + struct ethtool_value eval; + char *devname; + + if (!PyArg_ParseTuple(args, "si", &devname, &eval.data)) + return -1; + + return send_command(cmd, devname, &eval); +} + +static PyObject *get_tso(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GTSO, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +static PyObject *set_tso(PyObject *self __unused, PyObject *args) +{ + if (dev_set_int_value(ETHTOOL_STSO, args) < 0) + return NULL; + + Py_INCREF(Py_None); + return Py_None; +} + +static PyObject *get_ufo(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GUFO, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +static PyObject *get_gso(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GGSO, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +static PyObject *get_sg(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GSG, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +struct struct_desc { + char *name; + unsigned short offset; + unsigned short size; +}; + +#define member_desc(type, member_name) { \ + .name = #member_name, \ + .offset = offsetof(type, member_name), \ + .size = sizeof(((type *)0)->member_name), } + +struct struct_desc ethtool_coalesce_desc[] = { + member_desc(struct ethtool_coalesce, rx_coalesce_usecs), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames), + member_desc(struct ethtool_coalesce, rx_coalesce_usecs_irq), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_irq), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs_irq), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_irq), + member_desc(struct ethtool_coalesce, stats_block_coalesce_usecs), + member_desc(struct ethtool_coalesce, use_adaptive_rx_coalesce), + member_desc(struct ethtool_coalesce, use_adaptive_tx_coalesce), + member_desc(struct ethtool_coalesce, pkt_rate_low), + member_desc(struct ethtool_coalesce, rx_coalesce_usecs_low), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_low), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs_low), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_low), + member_desc(struct ethtool_coalesce, pkt_rate_high), + member_desc(struct ethtool_coalesce, rx_coalesce_usecs_high), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_high), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs_high), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_high), + member_desc(struct ethtool_coalesce, rate_sample_interval), +}; + +static PyObject *__struct_desc_create_dict(struct struct_desc *table, + int nr_entries, void *values) +{ + int i; + PyObject *dict = PyDict_New(); + + if (dict == NULL) + goto out; + + for (i = 0; i < nr_entries; ++i) { + struct struct_desc *d = &table[i]; + PyObject *objval = NULL; + void *val = values + d->offset; + + switch (d->size) { + case sizeof(uint32_t): + objval = PyInt_FromLong(*(uint32_t *)val); + break; + } + + if (objval == NULL) + goto free_dict; + + if (PyDict_SetItemString(dict, d->name, objval) != 0) { + Py_DECREF(objval); + goto free_dict; + } + + Py_DECREF(objval); + } +out: + return dict; +free_dict: + goto out; + dict = NULL; +} + +#define struct_desc_create_dict(table, values) \ + __struct_desc_create_dict(table, ARRAY_SIZE(table), values) + +static int __struct_desc_from_dict(struct struct_desc *table, + int nr_entries, void *to, PyObject *dict) +{ + char buf[2048]; + int i; + + for (i = 0; i < nr_entries; ++i) { + struct struct_desc *d = &table[i]; + void *val = to + d->offset; + PyObject *obj; + + switch (d->size) { + case sizeof(uint32_t): + obj = PyDict_GetItemString(dict, d->name); + if (obj == NULL) { + snprintf(buf, sizeof(buf), + "Missing dict entry for field %s", + d->name); + PyErr_SetString(PyExc_IOError, buf); + return -1; + } + *(uint32_t *)val = PyInt_AsLong(obj); + break; + default: + snprintf(buf, sizeof(buf), + "Invalid type size %d for field %s", + d->size, d->name); + PyErr_SetString(PyExc_IOError, buf); + return -1; + } + } + + return 0; +} + +#define struct_desc_from_dict(table, to, dict) \ + __struct_desc_from_dict(table, ARRAY_SIZE(table), to, dict) + +static PyObject *get_coalesce(PyObject *self __unused, PyObject *args) +{ + struct ethtool_coalesce coal; + + if (get_dev_value(ETHTOOL_GCOALESCE, args, &coal) < 0) + return NULL; + + return struct_desc_create_dict(ethtool_coalesce_desc, &coal); +} + +static PyObject *set_coalesce(PyObject *self __unused, PyObject *args) +{ + struct ethtool_coalesce coal; + char *devname; + PyObject *dict; + + if (!PyArg_ParseTuple(args, "sO", &devname, &dict)) + return NULL; + + if (struct_desc_from_dict(ethtool_coalesce_desc, &coal, dict) != 0) + return NULL; + + if (send_command(ETHTOOL_SCOALESCE, devname, &coal)) + return NULL; + + Py_INCREF(Py_None); + return Py_None; +} + +struct struct_desc ethtool_ringparam_desc[] = { + member_desc(struct ethtool_ringparam, rx_max_pending), + member_desc(struct ethtool_ringparam, rx_mini_max_pending), + member_desc(struct ethtool_ringparam, rx_jumbo_max_pending), + member_desc(struct ethtool_ringparam, tx_max_pending), + member_desc(struct ethtool_ringparam, rx_pending), + member_desc(struct ethtool_ringparam, rx_mini_pending), + member_desc(struct ethtool_ringparam, rx_jumbo_pending), + member_desc(struct ethtool_ringparam, tx_pending), +}; + +static PyObject *get_ringparam(PyObject *self __unused, PyObject *args) +{ + struct ethtool_ringparam ring; + + if (get_dev_value(ETHTOOL_GRINGPARAM, args, &ring) < 0) + return NULL; + + return struct_desc_create_dict(ethtool_ringparam_desc, &ring); +} + +static PyObject *set_ringparam(PyObject *self __unused, PyObject *args) +{ + struct ethtool_ringparam ring; + char *devname; + PyObject *dict; + + if (!PyArg_ParseTuple(args, "sO", &devname, &dict)) + return NULL; + + if (struct_desc_from_dict(ethtool_ringparam_desc, &ring, dict) != 0) + return NULL; + + if (send_command(ETHTOOL_SRINGPARAM, devname, &ring)) + return NULL; + + Py_INCREF(Py_None); + return Py_None; +} + +static struct PyMethodDef PyEthModuleMethods[] = { + { + .ml_name = "get_module", + .ml_meth = (PyCFunction)get_module, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_businfo", + .ml_meth = (PyCFunction)get_businfo, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_hwaddr", + .ml_meth = (PyCFunction)get_hwaddress, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_ipaddr", + .ml_meth = (PyCFunction)get_ipaddress, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_interfaces_info", + .ml_meth = (PyCFunction)get_interfaces_info, + .ml_flags = METH_VARARGS, + .ml_doc = "Accepts a string, list or tupples of interface names. " + "Returns a list of ethtool.etherinfo objets with device information." + }, + { + .ml_name = "get_netmask", + .ml_meth = (PyCFunction)get_netmask, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_broadcast", + .ml_meth = (PyCFunction)get_broadcast, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_coalesce", + .ml_meth = (PyCFunction)get_coalesce, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "set_coalesce", + .ml_meth = (PyCFunction)set_coalesce, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_devices", + .ml_meth = (PyCFunction)get_devices, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_active_devices", + .ml_meth = (PyCFunction)get_active_devices, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_ringparam", + .ml_meth = (PyCFunction)get_ringparam, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "set_ringparam", + .ml_meth = (PyCFunction)set_ringparam, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_tso", + .ml_meth = (PyCFunction)get_tso, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "set_tso", + .ml_meth = (PyCFunction)set_tso, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_ufo", + .ml_meth = (PyCFunction)get_ufo, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_gso", + .ml_meth = (PyCFunction)get_gso, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_sg", + .ml_meth = (PyCFunction)get_sg, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_flags", + .ml_meth = (PyCFunction)get_flags, + .ml_flags = METH_VARARGS, + }, + { .ml_name = NULL, }, +}; + + +/** + * Connects to the NETLINK interface. This should only be + * called once as part of the main ethtool module init. + * + * @param nlc Structure which keeps the NETLINK connection handle (struct nl_handle) + * + * @return Returns 1 on success, otherwise 0. + */ +int open_netlink(struct nl_handle **nlc) +{ + if( *nlc ) { + return 0; + } + + *nlc = nl_handle_alloc(); + nl_connect(*nlc, NETLINK_ROUTE); + return (*nlc != NULL); +} + + +/** + * Closes the NETLINK connection. This should be called automatically whenever + * the ethtool module is unloaded from Python. + * + * @param ptr Pointer to the pointer of struct nl_handle, which contains the NETLINK connection + */ +void close_netlink(void **ptr) +{ + struct nl_handle *nlc; + + if( !ptr && !*ptr ) { + return; + } + + nlc = (struct nl_handle *) *ptr; + if( !nlc ) { + return; + } + + /* Close NETLINK connection */ + nl_close(nlc); + nl_handle_destroy(nlc); + *ptr = NULL; /* reset the pointers pointer address */ +} + + +PyMODINIT_FUNC initethtool(void) +{ + PyObject *m; + m = Py_InitModule3("ethtool", PyEthModuleMethods, "Python ethtool module"); + + // Prepare the ethtool.etherinfo class + if (PyType_Ready(&ethtool_etherinfoType) < 0) + return; + Py_INCREF(&ethtool_etherinfoType); + PyModule_AddObject(m, "etherinfo", (PyObject *)&ethtool_etherinfoType); + + // Prepare the ethtool.etherinfo_ipv6addr class + if (PyType_Ready(&ethtool_etherinfoIPv6Type) < 0) + return; + Py_INCREF(&ethtool_etherinfoIPv6Type); + PyModule_AddObject(m, "etherinfo_ipv6addr", (PyObject *)&ethtool_etherinfoIPv6Type); + + // Prepare an internal netlink connection object + if( open_netlink(&nlconnection) ) { + PyModule_AddObject(m, "__nlconnection", + PyCObject_FromVoidPtr(&nlconnection, close_netlink)); + } + + // Setup constants + PyModule_AddIntConstant(m, "IFF_UP", IFF_UP); /* Interface is up. */ + PyModule_AddIntConstant(m, "IFF_BROADCAST", IFF_BROADCAST); /* Broadcast address valid. */ + PyModule_AddIntConstant(m, "IFF_DEBUG", IFF_DEBUG); /* Turn on debugging. */ + PyModule_AddIntConstant(m, "IFF_LOOPBACK", IFF_LOOPBACK); /* Is a loopback net */ + PyModule_AddIntConstant(m, "IFF_POINTOPOINT", IFF_POINTOPOINT); /* Is a point-to-point link */ + PyModule_AddIntConstant(m, "IFF_NOTRAILERS", IFF_NOTRAILERS); /* Avoid use of trailers */ + PyModule_AddIntConstant(m, "IFF_RUNNING", IFF_RUNNING); /* Resources allocated */ + PyModule_AddIntConstant(m, "IFF_NOARP", IFF_NOARP); /* No address resolution protocol. */ + PyModule_AddIntConstant(m, "IFF_PROMISC", IFF_PROMISC); /* Receive all packets. */ + PyModule_AddIntConstant(m, "IFF_ALLMULTI", IFF_ALLMULTI); /* Receive all multicast packets. */ + PyModule_AddIntConstant(m, "IFF_MASTER", IFF_MASTER); /* Master of a load balancer. */ + PyModule_AddIntConstant(m, "IFF_SLAVE", IFF_SLAVE); /* Slave of a load balancer. */ + PyModule_AddIntConstant(m, "IFF_MULTICAST", IFF_MULTICAST); /* Supports multicast. */ + PyModule_AddIntConstant(m, "IFF_PORTSEL", IFF_PORTSEL); /* Can set media type. */ + PyModule_AddIntConstant(m, "IFF_AUTOMEDIA", IFF_AUTOMEDIA); /* Auto media select active. */ + PyModule_AddIntConstant(m, "IFF_DYNAMIC", IFF_DYNAMIC); /* Dialup device with changing addresses. */ + PyModule_AddIntConstant(m, "AF_INET", AF_INET); /* IPv4 interface */ + PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); /* IPv6 interface */ +} + diff --git a/client/debian/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec b/client/debian/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec new file mode 100644 index 0000000..76a4dfe --- /dev/null +++ b/client/debian/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec @@ -0,0 +1,76 @@ +%{!?python_sitearch: %define python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")} +%{!?python_ver: %define python_ver %(%{__python} -c "import sys ; print sys.version[:3]")} + +Summary: Ethernet settings python bindings +Name: python-ethtool +Version: 0.5 +Release: 1%{?dist} +URL: http://fedorapeople.org/gitweb?p=dsommers/public_git/python-ethtool.git;a=s… +Source: http://dsommers.fedorapeople.org/python-ethtool/%{name}-%{version}.tar.bz2 +License: GPLv2 +Group: System Environment/Libraries +BuildRequires: python-devel libnl-devel +BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) + +%description +Python bindings for the ethtool kernel interface, that allows querying and +changing of Ethernet card settings, such as speed, port, auto-negotiation, and +PCI locations. + +%prep +%setup -q + +%build +%{__python} setup.py build + +%install +rm -rf %{buildroot} +%{__python} setup.py install --skip-build --root %{buildroot} +mkdir -p %{buildroot}%{_sbindir} +cp -p pethtool.py %{buildroot}%{_sbindir}/pethtool +cp -p pifconfig.py %{buildroot}%{_sbindir}/pifconfig + +%clean +rm -rf %{buildroot} + +%files +%defattr(-,root,root) +%doc COPYING +%{_sbindir}/pethtool +%{_sbindir}/pifconfig +%{python_sitearch}/ethtool.so +%if "%{python_ver}" >= "2.5" +%{python_sitearch}/*.egg-info +%endif + +%changelog +* Mon Aug 9 2010 David Sommerseth <davids(a)redhat.com> - 0.5-1 +- Fixed double free issue (commit c52ed2cbdc5b851ebc7b) + +* Wed Apr 28 2010 David Sommerseth <davids(a)redhat.com> - 0.4-1 +- David Sommerseth is now taking over the maintenance of python-ethtool +- New URLs for upstream source code +- Added new API: ethtool.get_interfaces_info() - returns list of etherinfo objects +- Added support retrieving for IPv6 address, using etherinfo::get_ipv6_addresses() + +* Fri Sep 5 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.3-2 +- Rewrote build and install sections as part of the fedora review process + BZ #459549 + +* Tue Aug 26 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.3-1 +- Add get_flags method from the first python-ethtool contributor, yay +- Add pifconfig command, that mimics the ifconfig tool using the + bindings available + +* Wed Aug 20 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.2-1 +- Expand description and summary fields, as part of the fedora + review process. + +* Tue Jun 10 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-3 +- add dist to the release tag + +* Tue Dec 18 2007 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-2 +- First build into MRG repo + +* Tue Dec 18 2007 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-1 +- Get ethtool code from rhpl 0.212 diff --git a/client/debian/python-ethtool-0.5/setup.py b/client/debian/python-ethtool-0.5/setup.py new file mode 100644 index 0000000..71b8c70 --- /dev/null +++ b/client/debian/python-ethtool-0.5/setup.py @@ -0,0 +1,69 @@ +#!/usr/bin/python2 + +from distutils.core import setup, Extension +import commands + +ethtool = Extension('ethtool', + sources = ['python-ethtool/ethtool.c', + 'python-ethtool/etherinfo.c', 'python-ethtool/etherinfo_obj.c']) + +def pkgconfig(pkg): + def _str2list(pkgstr, onlystr): + res = [] + for l in pkgstr.split(" "): + if l.find(onlystr) == 0: + res.append(l.replace(onlystr, "", 1)) + return res + + (res, cflags) = commands.getstatusoutput('pkg-config --cflags-only-other %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --cflags-only-other %s' % pkg + sys.exit(1) + + (res, includes) = commands.getstatusoutput('pkg-config --cflags-only-I %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --cflags-only-I %s' % pkg + sys.exit(1) + + (res, libs) = commands.getstatusoutput('pkg-config --libs-only-l %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --libs-only-l %s' % pkg + sys.exit(1) + + (res, libdirs) = commands.getstatusoutput('pkg-config --libs-only-L %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --libs-only-L %s' % pkg + sys.exit(1) + + + # Clean up the results and return what we've extracted from pkg-config + return {'cflags': cflags, + 'include': _str2list(includes, '-I'), + 'libs': _str2list(libs, '-l'), + 'libdirs': _str2list(libdirs, '-L') + } + + +libnl = pkgconfig('libnl-1') + +# don't reformat this line, Makefile parses it +setup(name='ethtool', + version='0.2', + description='Python module to interface with ethtool', + author='Harald Hoyer & Arnaldo Carvalho de Melo', + author_email='acme(a)redhat.com', + url='http://fedoraproject.org/wiki/python-ethtool', + ext_modules=[ + Extension( + 'ethtool', + sources = [ + 'python-ethtool/ethtool.c', + 'python-ethtool/etherinfo.c', + 'python-ethtool/etherinfo_obj.c', + 'python-ethtool/etherinfo_ipv6_obj.c'], + include_dirs = libnl['include'], + library_dirs = libnl['libdirs'], + libraries = libnl['libs'] + ) + ] +) diff --git a/spec-tree/python-ethtool-0.5/.pc/.quilt_patches b/spec-tree/python-ethtool-0.5/.pc/.quilt_patches deleted file mode 100644 index 6857a8d..0000000 --- a/spec-tree/python-ethtool-0.5/.pc/.quilt_patches +++ /dev/null @@ -1 +0,0 @@ -debian/patches diff --git a/spec-tree/python-ethtool-0.5/.pc/.quilt_series b/spec-tree/python-ethtool-0.5/.pc/.quilt_series deleted file mode 100644 index c206706..0000000 --- a/spec-tree/python-ethtool-0.5/.pc/.quilt_series +++ /dev/null @@ -1 +0,0 @@ -series diff --git a/spec-tree/python-ethtool-0.5/.pc/.version b/spec-tree/python-ethtool-0.5/.pc/.version deleted file mode 100644 index 0cfbf08..0000000 --- a/spec-tree/python-ethtool-0.5/.pc/.version +++ /dev/null @@ -1 +0,0 @@ -2 diff --git a/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pethtool.8.asciidoc b/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pethtool.8.asciidoc deleted file mode 100644 index e69de29..0000000 diff --git a/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pifconfig.8.asciidoc b/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pifconfig.8.asciidoc deleted file mode 100644 index e69de29..0000000 diff --git a/spec-tree/python-ethtool-0.5/COPYING b/spec-tree/python-ethtool-0.5/COPYING deleted file mode 100644 index a43ea21..0000000 --- a/spec-tree/python-ethtool-0.5/COPYING +++ /dev/null @@ -1,339 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 675 Mass Ave, Cambridge, MA 02139, USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - Appendix: How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) 19yy <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/spec-tree/python-ethtool-0.5/MANIFEST b/spec-tree/python-ethtool-0.5/MANIFEST deleted file mode 100644 index fe5d601..0000000 --- a/spec-tree/python-ethtool-0.5/MANIFEST +++ /dev/null @@ -1,16 +0,0 @@ -COPYING -pethtool.py -pifconfig.py -python-ethtool/ethtool.c -python-ethtool/ethtool-copy.h -python-ethtool/etherinfo.c -python-ethtool/etherinfo_obj.c -python-ethtool/etherinfo_ipv6_obj.c -python-ethtool/etherinfo_struct.h -python-ethtool/etherinfo.h -python-ethtool/etherinfo_obj.h -python-ethtool/etherinfo_ipv6_obj.h -setup.py -rpm/SPECS/python-ethtool.spec -MANIFEST -Makefile diff --git a/spec-tree/python-ethtool-0.5/Makefile b/spec-tree/python-ethtool-0.5/Makefile deleted file mode 100644 index ce181ee..0000000 --- a/spec-tree/python-ethtool-0.5/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -PACKAGE := python-ethtool -VERSION := $(shell rpm -q --qf '%{VERSION} ' --specfile rpm/SPECS/$(PACKAGE).spec | cut -d' ' -f1) - -rpmdirs: - @[ -d rpm/BUILD ] || mkdir rpm/BUILD - @[ -d rpm/RPMS ] || mkdir rpm/RPMS - @[ -d rpm/SRPMS ] || mkdir rpm/SRPMS - @[ -d rpm/SOURCES ] || mkdir rpm/SOURCES - -bz2: rpmdirs - git archive --format=tar --prefix=$(PACKAGE)-$(VERSION)/ HEAD | \ - bzip2 -9 > rpm/SOURCES/$(PACKAGE)-$(VERSION).tar.bz2 - -install: - python setup.py install --root=$(DESTDIR) - -rpm: bz2 rpmdirs - rpmbuild -ba --define "_topdir $(PWD)/rpm" rpm/SPECS/$(PACKAGE).spec - -bz2dev: rpmdirs - @mkdir -p /tmp/$(PACKAGE)-$(VERSION) - @tar cf - `cat MANIFEST` | (cd /tmp/$(PACKAGE)-$(VERSION) ; tar xf -) - @(cd /tmp; tar cf - $(PACKAGE)-$(VERSION)) | bzip2 -9 > rpm/SOURCES/$(PACKAGE)-$(VERSION).tar.bz2 - -rpmdev: bz2dev rpmdirs - rpmbuild -ba --define "_topdir $(PWD)/rpm" rpm/SPECS/$(PACKAGE).spec diff --git a/spec-tree/python-ethtool-0.5/debian/changelog b/spec-tree/python-ethtool-0.5/debian/changelog deleted file mode 100644 index 4516b6b..0000000 --- a/spec-tree/python-ethtool-0.5/debian/changelog +++ /dev/null @@ -1,12 +0,0 @@ -python-ethtool (0.5-1) unstable; urgency=low - - * Packaging for Debian main (Closes: #549323). - - -- Miroslav Suchý <miroslav(a)suchy.cz> Wed, 29 Sep 2010 23:00:00 +0200 - -python-ethtool (0.3-2) unstable; urgency=low - - * Initial release - - -- Lukáš Ďurfina <lukas.durfina(a)gmail.com> Wed, 09 Sep 2009 18:49:50 +0200 - diff --git a/spec-tree/python-ethtool-0.5/debian/compat b/spec-tree/python-ethtool-0.5/debian/compat deleted file mode 100644 index 7f8f011..0000000 --- a/spec-tree/python-ethtool-0.5/debian/compat +++ /dev/null @@ -1 +0,0 @@ -7 diff --git a/spec-tree/python-ethtool-0.5/debian/control b/spec-tree/python-ethtool-0.5/debian/control deleted file mode 100644 index 7318d89..0000000 --- a/spec-tree/python-ethtool-0.5/debian/control +++ /dev/null @@ -1,15 +0,0 @@ -Source: python-ethtool -Section: python -Priority: extra -Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> -Build-Depends: debhelper (>= 7.0.50~), python, python-all-dev, libnl-dev, python-support (>= 0.8), asciidoc -Standards-Version: 3.9.1 -Homepage: http://fedorapeople.org/gitweb?p=dsommers/public_git/python-ethtool.git;a=s… - -Package: python-ethtool -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends} -Description: Ethernet settings python bindings - Python bindings for the ethtool kernel interface, that allows querying and - changing of ethernet card settings, such as speed, port, autonegotiation, - and PCI locations. diff --git a/spec-tree/python-ethtool-0.5/debian/copyright b/spec-tree/python-ethtool-0.5/debian/copyright deleted file mode 100644 index 1696cbf..0000000 --- a/spec-tree/python-ethtool-0.5/debian/copyright +++ /dev/null @@ -1,38 +0,0 @@ -This package was debianized by Lukáš Ďurfina <lukas.durfina(a)gmail.com> on -Wed, 09 Sep 2009 18:49:50 +0200. - -It was downloaded from http://git.kernel.org/?p=linux/kernel/git/acme/python-ethtool.git - -Upstream Author(s): - - Arnaldo Carvalho de Melo <acme(a)redhat.com> - David Sommerseth <davids(a)redhat.com> - -Copyright: - - Arnaldo Carvalho de Melo <acme(a)redhat.com> - David Sommerseth <davids(a)redhat.com> - -License: - - This package is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This package is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this package; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - -On Debian systems, the complete text of the GNU General -Public License can be found in `/usr/share/common-licenses/GPL'. - -File ethtool-copy.h is copy from gkernel and is licenced under GPLv2. - -The Debian packaging is Copyright 2009, Lukáš Ďurfina <lukas.durfina(a)gmail.com> and -is licensed under the GPL, see above. diff --git a/spec-tree/python-ethtool-0.5/debian/install b/spec-tree/python-ethtool-0.5/debian/install deleted file mode 100644 index c45faa4..0000000 --- a/spec-tree/python-ethtool-0.5/debian/install +++ /dev/null @@ -1,2 +0,0 @@ -pethtool usr/sbin -pifconfig usr/sbin diff --git a/spec-tree/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 b/spec-tree/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 deleted file mode 100644 index 751399e..0000000 --- a/spec-tree/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 +++ /dev/null @@ -1,155 +0,0 @@ -Description: Upstream changes introduced in version 0.5-1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - python-ethtool (0.5-1) unstable; urgency=low - . - * Packaging for Debian main (Closes: #549323). - . - The person named in the Author field signed this changelog entry. -Author: Miroslav Suchý <miroslav(a)suchy.cz> -Bug-Debian: http://bugs.debian.org/549323 - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: <vendor|upstream|other>, <url of original patch> -Bug: <url in upstream bugtracker> -Bug-Debian: http://bugs.debian.org/<bugnumber> -Bug-Ubuntu: https://launchpad.net/bugs/<bugnumber> -Forwarded: <no|not-needed|url proving that it has been forwarded> -Reviewed-By: <name and email of someone who approved the patch> -Last-Update: <YYYY-MM-DD> - ---- /dev/null -+++ python-ethtool-0.5/man/pifconfig.8.asciidoc -@@ -0,0 +1,42 @@ -+pifconfig(8) -+============ -+ -+NAME -+---- -+pifconfig - display information about a network interface -+ -+ -+SYNOPSIS -+-------- -+pifconfig [INTERFACE] -+ -+ -+DESCRIPTION -+----------- -+ -+This script mimic ifconfig behavior, but is written purely in python -+and python module ethtool. -+ -+ -+OPTIONS -+------- -+ -+INTERFACE:: -+Display information about only this interface. If no interface is given -+then all interfaces are displayed. -+ -+-h, --help:: -+Show help message and exit. -+ -+ -+SEE ALSO -+-------- -+ifconfig(8) -+ -+ -+ -+AUTHORS -+------- -+Arnaldo Carvalho de Melo <acme(a)redhat.com> -+ -+Man page written by Miroslav Suchý <msuchy(a)redhat.com> ---- /dev/null -+++ python-ethtool-0.5/man/pethtool.8.asciidoc -@@ -0,0 +1,81 @@ -+pethtool(8) -+=========== -+ -+NAME -+---- -+pethtool - Display or change ethernet card settings -+ -+ -+SYNOPSIS -+-------- -+pethtool [OPTIONS] [<INTERFACE>] -+ -+ -+DESCRIPTION -+----------- -+ -+This script mimic ethtool behavior, but is written purely in python -+and python module ethtool. -+ -+ -+OPTIONS -+------- -+ -+INTERFACE:: -+Is the name of the ethernet device on which pethtool should operate. -+ -+-h, --help:: -+Show help message and exit. -+ -+-c|--show-coalesce:: -+Show coalesce options -+ -+-C|--coalesce:: -+Set coalesce options -+ -+ adaptive-rx on|off -+ adaptive-tx on|off -+ rx-usecs N -+ rx-frames N -+ rx-usecs-irq N -+ rx-frames-irq N -+ tx-usecs N -+ tx-frames N -+ tx-usecs-irq N -+ tx-frames-irq N -+ stats-block-usecs N -+ pkt-rate-low N -+ rx-usecs-low N -+ rx-frames-low N -+ tx-usecs-low N -+ tx-frames-low N -+ pkt-rate-high N -+ rx-usecs-high N -+ rx-frames-high N -+ tx-usecs-high N -+ tx-frames-high N -+ sample-interval N -+ -+ -+-i|--driver:: -+Show driver information -+ -+-k|--show-offload:: -+Get protocol offload information -+ -+-K|--offload:: -+ Set protocol offload;; -+ [ tso on|off ] -+ -+ -+ -+SEE ALSO -+-------- -+ethtool(8) -+ -+ -+AUTHORS -+------- -+Arnaldo Carvalho de Melo <acme(a)redhat.com> -+ -+Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/spec-tree/python-ethtool-0.5/debian/patches/series b/spec-tree/python-ethtool-0.5/debian/patches/series deleted file mode 100644 index 6e26301..0000000 --- a/spec-tree/python-ethtool-0.5/debian/patches/series +++ /dev/null @@ -1 +0,0 @@ -debian-changes-0.5-1 diff --git a/spec-tree/python-ethtool-0.5/debian/python-ethtool.manpages b/spec-tree/python-ethtool-0.5/debian/python-ethtool.manpages deleted file mode 100644 index 2a14e70..0000000 --- a/spec-tree/python-ethtool-0.5/debian/python-ethtool.manpages +++ /dev/null @@ -1,2 +0,0 @@ -man/pethtool.8 -man/pifconfig.8 diff --git a/spec-tree/python-ethtool-0.5/debian/rules b/spec-tree/python-ethtool-0.5/debian/rules deleted file mode 100755 index c5a6480..0000000 --- a/spec-tree/python-ethtool-0.5/debian/rules +++ /dev/null @@ -1,20 +0,0 @@ -#!/usr/bin/make -f - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -override_dh_auto_build: - dh_auto_configure --buildsystem=python_distutils - cp -p pethtool.py pethtool - cp -p pifconfig.py pifconfig - a2x -d manpage -f manpage man/pethtool.8.asciidoc - a2x -d manpage -f manpage man/pifconfig.8.asciidoc - -clean: - if [ -f setup.py ]; then dh --buildsystem=python_distutils $@; fi - #rm -f setup.py - rm -f setup.cfg pethtool pifconfig man/pethtool.8 man/pifconfig.8 - rm -rf build - -%: - dh --buildsystem=python_distutils $@ diff --git a/spec-tree/python-ethtool-0.5/debian/source/format b/spec-tree/python-ethtool-0.5/debian/source/format deleted file mode 100644 index 163aaf8..0000000 --- a/spec-tree/python-ethtool-0.5/debian/source/format +++ /dev/null @@ -1 +0,0 @@ -3.0 (quilt) diff --git a/spec-tree/python-ethtool-0.5/debian/watch b/spec-tree/python-ethtool-0.5/debian/watch deleted file mode 100644 index 012eefc..0000000 --- a/spec-tree/python-ethtool-0.5/debian/watch +++ /dev/null @@ -1,2 +0,0 @@ -version=3 -http://dsommers.fedorapeople.org/python-ethtool/python-ethtool-(.*)\.tar\.bz2 diff --git a/spec-tree/python-ethtool-0.5/man/pethtool.8.asciidoc b/spec-tree/python-ethtool-0.5/man/pethtool.8.asciidoc deleted file mode 100644 index 167114a..0000000 --- a/spec-tree/python-ethtool-0.5/man/pethtool.8.asciidoc +++ /dev/null @@ -1,81 +0,0 @@ -pethtool(8) -=========== - -NAME ----- -pethtool - Display or change ethernet card settings - - -SYNOPSIS --------- -pethtool [OPTIONS] [<INTERFACE>] - - -DESCRIPTION ------------ - -This script mimic ethtool behavior, but is written purely in python -and python module ethtool. - - -OPTIONS -------- - -INTERFACE:: -Is the name of the ethernet device on which pethtool should operate. - --h, --help:: -Show help message and exit. - --c|--show-coalesce:: -Show coalesce options - --C|--coalesce:: -Set coalesce options - - adaptive-rx on|off - adaptive-tx on|off - rx-usecs N - rx-frames N - rx-usecs-irq N - rx-frames-irq N - tx-usecs N - tx-frames N - tx-usecs-irq N - tx-frames-irq N - stats-block-usecs N - pkt-rate-low N - rx-usecs-low N - rx-frames-low N - tx-usecs-low N - tx-frames-low N - pkt-rate-high N - rx-usecs-high N - rx-frames-high N - tx-usecs-high N - tx-frames-high N - sample-interval N - - --i|--driver:: -Show driver information - --k|--show-offload:: -Get protocol offload information - --K|--offload:: - Set protocol offload;; - [ tso on|off ] - - - -SEE ALSO --------- -ethtool(8) - - -AUTHORS -------- -Arnaldo Carvalho de Melo <acme(a)redhat.com> - -Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/spec-tree/python-ethtool-0.5/man/pifconfig.8.asciidoc b/spec-tree/python-ethtool-0.5/man/pifconfig.8.asciidoc deleted file mode 100644 index cbd48b8..0000000 --- a/spec-tree/python-ethtool-0.5/man/pifconfig.8.asciidoc +++ /dev/null @@ -1,42 +0,0 @@ -pifconfig(8) -============ - -NAME ----- -pifconfig - display information about a network interface - - -SYNOPSIS --------- -pifconfig [INTERFACE] - - -DESCRIPTION ------------ - -This script mimic ifconfig behavior, but is written purely in python -and python module ethtool. - - -OPTIONS -------- - -INTERFACE:: -Display information about only this interface. If no interface is given -then all interfaces are displayed. - --h, --help:: -Show help message and exit. - - -SEE ALSO --------- -ifconfig(8) - - - -AUTHORS -------- -Arnaldo Carvalho de Melo <acme(a)redhat.com> - -Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/spec-tree/python-ethtool-0.5/pethtool.py b/spec-tree/python-ethtool-0.5/pethtool.py deleted file mode 100755 index 49d667e..0000000 --- a/spec-tree/python-ethtool-0.5/pethtool.py +++ /dev/null @@ -1,380 +0,0 @@ -#! /usr/bin/python -# -*- python -*- -# -*- coding: utf-8 -*- -# Copyright (C) 2008 Red Hat Inc. -# -# This application is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# as published by the Free Software Foundation; version 2. -# -# This application is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -import getopt, ethtool, sys - -def usage(): - print '''Usage: ethtool [OPTIONS] [<interface>] - -h|--help Give this help list - -c|--show-coalesce Show coalesce options - -C|--coalesce Set coalesce options - [adaptive-rx on|off] - [adaptive-tx on|off] - [rx-usecs N] - [rx-frames N] - [rx-usecs-irq N] - [rx-frames-irq N] - [tx-usecs N] - [tx-frames N] - [tx-usecs-irq N] - [tx-frames-irq N] - [stats-block-usecs N] - [pkt-rate-low N] - [rx-usecs-low N] - [rx-frames-low N] - [tx-usecs-low N] - [tx-frames-low N] - [pkt-rate-high N] - [rx-usecs-high N] - [rx-frames-high N] - [tx-usecs-high N] - [tx-frames-high N] - [sample-interval N] - -i|--driver Show driver information - -k|--show-offload Get protocol offload information - -K|--offload Set protocol offload - [ tso on|off ]''' - -tab = "" - -def printtab(msg): - print tab + msg - -all_devices = [] - -ethtool_coalesce_msgs = ( - ( "stats-block-usecs", - "stats_block_coalesce_usecs" ), - ( "sample-interval", - "rate_sample_interval" ), - ( "pkt-rate-low", - "pkt_rate_low"), - ( "pkt-rate-high", - "pkt_rate_high"), - ( "\n" ), - ( "rx-usecs", - "rx_coalesce_usecs"), - ( "rx-frames", - "rx_max_coalesced_frames"), - ( "rx-usecs-irq", - "rx_coalesce_usecs_irq"), - ( "rx-frames-irq", - "rx_max_coalesced_frames_irq"), - ( "\n" ), - ( "tx-usecs", - "tx_coalesce_usecs"), - ( "tx-frames", - "tx_max_coalesced_frames"), - ( "tx-usecs-irq", - "tx_coalesce_usecs_irq"), - ( "tx-frames-irq", - "tx_max_coalesced_frames_irq"), - ( "\n" ), - ( "rx-usecs-low", - "rx_coalesce_usecs_low"), - ( "rx-frame-low", - "rx_max_coalesced_frames_low"), - ( "tx-usecs-low", - "tx_coalesce_usecs_low"), - ( "tx-frame-low", - "tx_max_coalesced_frames_low"), - ( "\n" ), - ( "rx-usecs-high", - "rx_coalesce_usecs_high"), - ( "rx-frame-high", - "rx_max_coalesced_frames_high"), - ( "tx-usecs-high", - "tx_coalesce_usecs_high"), - ( "tx-frame-high", - "tx_max_coalesced_frames_high"), -) - -def get_coalesce_dict_entry(ethtool_name): - if ethtool_name == "adaptive-rx": - return "use_adaptive_rx_coalesce" - - if ethtool_name == "adaptive-tx": - return "use_adaptive_tx_coalesce" - - for name in ethtool_coalesce_msgs: - if name[0] == ethtool_name: - return name[1] - - return None - -def show_coalesce(interface, args = None): - printtab("Coalesce parameters for %s:" % interface) - try: - coal = ethtool.get_coalesce(interface) - except IOError: - printtab(" NOT supported!") - return - - printtab("Adaptive RX: %s TX: %s" % (coal["use_adaptive_rx_coalesce"] and "on" or "off", - coal["use_adaptive_tx_coalesce"] and "on" or "off")) - - printed = [ "use_adaptive_rx_coalesce", - "use_adaptive_tx_coalesce" ] - for tunable in ethtool_coalesce_msgs: - if tunable[0] == '\n': - print - else: - printtab("%s: %s" % (tunable[0], coal[tunable[1]])) - printed.append(tunable[1]) - - coalkeys = coal.keys() - if len(coalkeys) != len(printed): - print - for tunable in coalkeys: - if tunable not in printed: - printtab("%s %s" % (tunable, coal[tunable])) - -def set_coalesce(interface, args): - try: - coal = ethtool.get_coalesce(interface) - except IOError: - printtab("Interrupt coalescing NOT supported on %s!" % interface) - return - - changed = False - args = [a.lower() for a in args] - for arg, value in [ ( args[i], args[i + 1] ) for i in range(0, len(args), 2) ]: - real_arg = get_coalesce_dict_entry(arg) - if not real_arg: - continue - if value == "on": - value = 1 - elif value == "off": - value = 0 - else: - try: - value = int(value) - except: - continue - if coal[real_arg] != value: - coal[real_arg] = value - changed = True - - if not changed: - return - - ethtool.set_coalesce(interface, coal) - -def show_offload(interface, args = None): - try: - sg = ethtool.get_sg(interface) and "on" or "off" - except IOError: - sg = "not supported" - - try: - tso = ethtool.get_tso(interface) and "on" or "off" - except IOError: - tso = "not supported" - - try: - ufo = ethtool.get_ufo(interface) and "on" or "off" - except IOError: - ufo = "not supported" - - try: - gso = ethtool.get_gso(interface) and "on" or "off" - except IOError: - gso = "not supported" - - printtab("scatter-gather: %s" % sg) - printtab("tcp segmentation offload: %s" % tso) - printtab("udp fragmentation offload: %s" % ufo) - printtab("generic segmentation offload: %s" % gso) - -def set_offload(interface, args): - cmd, value = [a.lower() for a in args] - - if cmd == "tso": - value = value == "on" and 1 or 0 - try: - ethtool.set_tso(interface, value) - except: - pass - -ethtool_ringparam_msgs = ( - ( "Pre-set maximums", ), - ( "RX:\t\t", "rx_max_pending" ), - ( "RX Mini:\t", "rx_mini_max_pending" ), - ( "RX Jumbo:\t", "rx_jumbo_max_pending" ), - ( "TX:\t\t", "tx_max_pending" ), - ( "Current hardware settings", ), - ( "RX:\t\t", "rx_pending" ), - ( "RX Mini:\t", "rx_mini_pending" ), - ( "RX Jumbo:\t", "rx_jumbo_pending" ), - ( "TX:\t\t", "tx_pending" ), -) - -def show_ring(interface, args = None): - printtab("Ring parameters for %s:" % interface) - try: - ring = ethtool.get_ringparam(interface) - except IOError: - printtab(" NOT supported!") - return - - printed = [] - for tunable in ethtool_ringparam_msgs: - if len(tunable) == 1: - printtab("%s:" % tunable[0]) - else: - printtab("%s %s" % (tunable[0], ring[tunable[1]])) - printed.append(tunable[1]) - - ringkeys = ring.keys() - if len(ringkeys) != len(printed): - print - for tunable in ringkeys: - if tunable not in printed: - printtab("%s %s" % (tunable, ring[tunable])) - -ethtool_ringparam_map = { - "rx": "rx_pending", - "rx-mini": "rx_mini_pending", - "rx-jumbo": "rx_jumbo_pending", - "tx": "tx_pending", -} - -def set_ringparam(interface, args): - try: - ring = ethtool.get_ringparam(interface) - except IOError: - printtab("ring parameters NOT supported on %s!" % interface) - return - - changed = False - args = [a.lower() for a in args] - for arg, value in [ ( args[i], args[i + 1] ) for i in range(0, len(args), 2) ]: - if not ethtool_ringparam_map.has_key(arg): - continue - try: - value = int(value) - except: - continue - real_arg = ethtool_ringparam_map[arg] - if ring[real_arg] != value: - ring[real_arg] = value - changed = True - - if not changed: - return - - ethtool.set_ringparam(interface, ring) - -def show_driver(interface, args = None): - try: - driver = ethtool.get_module(interface) - except IOError: - driver = "not implemented" - - try: - bus = ethtool.get_businfo(interface) - except IOError: - bus = "not available" - - printtab("driver: %s" % driver) - printtab("bus-info: %s" % bus) - -def run_cmd(cmd, interface, args): - global tab, all_devices - - active_devices = ethtool.get_active_devices() - if not interface: - tab = " " - for interface in all_devices: - inactive = " (not active)" - if interface in active_devices: - inactive = "" - print "%s%s:" % (interface, inactive) - cmd(interface, args) - else: - cmd(interface, args) - -def run_cmd_noargs(cmd, args): - if args: - run_cmd(cmd, args[0], None) - else: - global all_devices - all_devices = ethtool.get_devices() - run_cmd(cmd, None, None) - -def main(): - global all_devices - - try: - opts, args = getopt.getopt(sys.argv[1:], - "hcCgGikK", - ("help", - "show-coalesce", - "coalesce", - "show-ring", - "set-ring", - "driver", - "show-offload", - "offload")) - except getopt.GetoptError, err: - usage() - print str(err) - sys.exit(2) - - if not opts: - usage() - sys.exit(0) - - for o, a in opts: - if o in ("-h", "--help"): - usage() - return - elif o in ("-c", "--show-coalesce"): - run_cmd_noargs(show_coalesce, args) - break - elif o in ("-i", "--driver"): - run_cmd_noargs(show_driver, args) - break - elif o in ("-k", "--show-offload"): - run_cmd_noargs(show_offload, args) - break - elif o in ("-g", "--show-ring"): - run_cmd_noargs(show_ring, args) - break - elif o in ("-K", "--offload", - "-C", "--coalesce", - "-G", "--set-ring"): - all_devices = ethtool.get_devices() - if len(args) < 2: - usage() - sys.exit(1) - - if args[0] not in all_devices: - interface = None - else: - interface = args[0] - args = args[1:] - - if o in ("-K", "--offload"): - cmd = set_offload - elif o in ("-C", "--coalesce"): - cmd = set_coalesce - elif o in ("-G", "--set-ring"): - cmd = set_ringparam - - run_cmd(cmd, interface, args) - break - -if __name__ == '__main__': - main() diff --git a/spec-tree/python-ethtool-0.5/pifconfig.py b/spec-tree/python-ethtool-0.5/pifconfig.py deleted file mode 100755 index cfaa2a6..0000000 --- a/spec-tree/python-ethtool-0.5/pifconfig.py +++ /dev/null @@ -1,98 +0,0 @@ -#! /usr/bin/python -# -*- python -*- -# -*- coding: utf-8 -*- -# Copyright (C) 2008 Red Hat Inc. -# -# Arnaldo Carvalho de Melo <acme(a)redhat.com> -# -# This application is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# as published by the Free Software Foundation; version 2. -# -# This application is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -import getopt, ethtool, sys - -def usage(): - print '''Usage: - pifconfig <interface> -''' - -def flags2str(flags): - string = "" - if flags & ethtool.IFF_UP: - string += "UP " - if flags & ethtool.IFF_BROADCAST: - string += "BROADCAST " - if flags & ethtool.IFF_DEBUG: - string += "DEBUG " - if flags & ethtool.IFF_LOOPBACK: - string += "LOOPBACK " - if flags & ethtool.IFF_POINTOPOINT: - string += "POINTOPOINT " - if flags & ethtool.IFF_NOTRAILERS: - string += "NOTRAILERS " - if flags & ethtool.IFF_RUNNING: - string += "RUNNING " - if flags & ethtool.IFF_NOARP: - string += "NOARP " - if flags & ethtool.IFF_PROMISC: - string += "PROMISC " - if flags & ethtool.IFF_ALLMULTI: - string += "ALLMULTI " - if flags & ethtool.IFF_MASTER: - string += "MASTER " - if flags & ethtool.IFF_SLAVE: - string += "SLAVE " - if flags & ethtool.IFF_MULTICAST: - string += "MULTICAST " - if flags & ethtool.IFF_PORTSEL: - string += "PORTSEL " - if flags & ethtool.IFF_AUTOMEDIA: - string += "AUTOMEDIA " - if flags & ethtool.IFF_DYNAMIC: - string += "DYNAMIC " - - return string.strip() - -def show_config(device): - ipaddr = ethtool.get_ipaddr(device) - netmask = ethtool.get_netmask(device) - flags = ethtool.get_flags(device) - print '%-9.9s' % device, - if not (flags & ethtool.IFF_LOOPBACK): - print "HWaddr %s" % ethtool.get_hwaddr(device), - print ''' - inet addr:%s''' % ipaddr, - if not (flags & (ethtool.IFF_LOOPBACK | ethtool.IFF_POINTOPOINT)): - print "Bcast:%s" % ethtool.get_broadcast(device), - print ''' Mask:%s - %s -''' % (netmask, flags2str(flags)) - -def main(): - global all_devices - - try: - opts, args = getopt.getopt(sys.argv[1:], - "h", - ("help",)) - except getopt.GetoptError, err: - usage() - print str(err) - sys.exit(2) - - for o, a in opts: - if o in ("-h", "--help"): - usage() - return - - active_devices = ethtool.get_active_devices() - for device in active_devices: - show_config(device) - -if __name__ == '__main__': - main() diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.c b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.c deleted file mode 100644 index 41a55fe..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.c +++ /dev/null @@ -1,333 +0,0 @@ -/* etherinfo.c - Retrieve ethernet interface info via NETLINK - * - * Copyright (C) 2009-2010 Red Hat Inc. - * - * David Sommerseth <davids(a)redhat.com> - * Parts of this code is based on ideas and solutions in iproute2 - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <Python.h> -#include <bits/sockaddr.h> -#include <stdio.h> -#include <string.h> -#include <sys/types.h> -#include <unistd.h> -#include <stdlib.h> -#include <asm/types.h> -#include <sys/socket.h> -#include <netlink/route/rtnl.h> -#include <assert.h> -#include <errno.h> -#include "etherinfo_struct.h" -#include "etherinfo.h" - -/* - * - * Internal functions for working with struct etherinfo - * - */ - -/** - * Simple macro which makes sure the destination string is freed if used earlier. - * - * @param dst Destination pointer - * @param src Source pointer - * - */ -#define SET_STR_VALUE(dst, src) { \ - if( dst ) { \ - free(dst); \ - }; \ - dst = strdup(src); \ - } - - -/** - * Frees the memory used by a struct ipv6address pointer chain. All elements are freed - * - * @param ptr Pointer to a struct ipv6address chain. - */ -void free_ipv6addresses(struct ipv6address *ptr) { - struct ipv6address *ipv6ptr = ptr; - - if( !ptr ) { - return; - } - - while( ipv6ptr ) { - struct ipv6address *tmp = ipv6ptr->next; - - if( ipv6ptr->address ) { - free(ipv6ptr->address); - } - free(ipv6ptr); - ipv6ptr = tmp; - } -} - -/** - * Frees the memory used by struct etherinfo, including all struct ipv6address children. - * - * @param ptr Pointer to a struct etherninfo element - */ -void free_etherinfo(struct etherinfo *ptr) -{ - if( ptr == NULL ) { // Just for safety - return; - } - - free(ptr->device); - - if( ptr->hwaddress ) { - free(ptr->hwaddress); - } - if( ptr->ipv4_address ) { - free(ptr->ipv4_address); - } - if( ptr->ipv4_broadcast ) { - free(ptr->ipv4_broadcast); - } - if( ptr->ipv6_addresses ) { - free_ipv6addresses(ptr->ipv6_addresses); - } - free(ptr); -} - - -/** - * Add a new IPv6 address record to a struct ipv6address chain - * - * @param addrptr Pointer to the current IPv6 address chain. - * @param addr IPv6 address, represented as char * string - * @param netmask IPv6 netmask, as returned by libnl rtnl_addr_get_prefixlen() - * @param scope IPV6 address scope, as returned by libnl rtnl_addr_get_scope() - * - * @return Returns a new pointer to the chain containing the new element - */ -struct ipv6address * etherinfo_add_ipv6(struct ipv6address *addrptr, const char *addr, int netmask, int scope) { - struct ipv6address *newaddr = NULL; - - newaddr = calloc(1, sizeof(struct ipv6address)+2); - if( !newaddr ) { - fprintf(stderr, "** ERROR ** Could not allocate memory for a new IPv6 address record (%s/%i [%i])", - addr, netmask, scope); - return addrptr; - } - - SET_STR_VALUE(newaddr->address, addr); - newaddr->netmask = netmask; - newaddr->scope = scope; - newaddr->next = addrptr; - return newaddr; -} - - -/** - * libnl callback function. Does the real parsing of a record returned by NETLINK. This function - * parses LINK related packets - * - * @param obj Pointer to a struct nl_object response - * @param arg Pointer to a struct etherinfo element where the parse result will be saved - */ -static void callback_nl_link(struct nl_object *obj, void *arg) -{ - struct etherinfo *ethi = (struct etherinfo *) arg; - struct rtnl_link *link = (struct rtnl_link *) obj; - struct nl_addr *addr = rtnl_link_get_addr(link); - unsigned int i, len; - unsigned char *binaddr; - char hwaddr[130], *ptr; - - if( (ethi == NULL) || (ethi->hwaddress != NULL) ) { - return; - } - - binaddr = nl_addr_get_binary_addr(addr); - memset(&hwaddr, 0, 130); - len = 20; - ptr = (char *)&hwaddr; - for( i = 0; i < 6; i++ ) { - if( i == 0 ) { - snprintf(ptr, len, "%02X", *(binaddr+i)); - len -= 2; - ptr += 2; - } else { - snprintf(ptr, len, ":%02X", *(binaddr+i)); - len -= 3; - ptr += 3; - } - } - SET_STR_VALUE(ethi->hwaddress, hwaddr); -} - - -/** - * libnl callback function. Does the real parsing of a record returned by NETLINK. This function - * parses ADDRESS related packets - * - * @param obj Pointer to a struct nl_object response - * @param arg Pointer to a struct etherinfo element where the parse result will be saved - */ -static void callback_nl_address(struct nl_object *obj, void *arg) -{ - struct etherinfo *ethi = (struct etherinfo *) arg; - struct nl_addr *addr; - char ip_str[66]; - int family; - - if( ethi == NULL ) { - return; - } - - addr = rtnl_addr_get_local((struct rtnl_addr *)obj); - family = nl_addr_get_family(addr); - switch( family ) { - case AF_INET: - case AF_INET6: - memset(&ip_str, 0, 66); - inet_ntop(family, nl_addr_get_binary_addr(addr), (char *)&ip_str, 64); - - if( family == AF_INET ) { - struct nl_addr *brdcst = rtnl_addr_get_broadcast((struct rtnl_addr *)obj); - char brdcst_str[66]; - - SET_STR_VALUE(ethi->ipv4_address, ip_str); - ethi->ipv4_netmask = rtnl_addr_get_prefixlen((struct rtnl_addr*) obj); - - if( brdcst ) { - memset(&brdcst_str, 0, 66); - inet_ntop(family, nl_addr_get_binary_addr(brdcst), (char *)&brdcst_str, 64); - SET_STR_VALUE(ethi->ipv4_broadcast, brdcst_str); - } - } else { - ethi->ipv6_addresses = etherinfo_add_ipv6(ethi->ipv6_addresses, - ip_str, - rtnl_addr_get_prefixlen((struct rtnl_addr*) obj), - rtnl_addr_get_scope((struct rtnl_addr*) obj)); - } - return; - default: - return; - } -} - - - -/* - * - * Exported functions - API frontend - * - */ - -/** - * Dumps the contents of a struct etherinfo element to file - * - * @param fp FILE pointer where to dump - * @param ptr Pointer to a struct etherinfo element - */ -void dump_etherinfo(FILE *fp, struct etherinfo *ptr) -{ - - fprintf(fp, "*** Interface [%i] %s ", ptr->index, ptr->device); - if( ptr->hwaddress ) { - fprintf(fp, "MAC address: %s", ptr->hwaddress); - } - fprintf(fp, "\n"); - if( ptr->ipv4_address ) { - fprintf(fp, "\tIPv4 Address: %s/%i", - ptr->ipv4_address, ptr->ipv4_netmask); - if( ptr->ipv4_broadcast ) { - fprintf(fp, " - Broadcast: %s", ptr->ipv4_broadcast); - } - fprintf(fp, "\n"); - } - if( ptr->ipv6_addresses ) { - struct ipv6address *ipv6 = ptr->ipv6_addresses; - - fprintf(fp, "\tIPv6 addresses:\n"); - for(; ipv6; ipv6 = ipv6->next) { - char scope[66]; - - rtnl_scope2str(ipv6->scope, scope, 64); - fprintf(fp, "\t [%s] %s/%i\n", - scope, ipv6->address, ipv6->netmask); - } - } - fprintf(fp, "\n"); -} - - -/** - * Query NETLINK for ethernet configuration - * - * @param ethinf Pointer to an available struct etherinfo element. The 'device' member - * must contain a valid string to the device to query for information - * @param nlc Pointer to the libnl handle, which is used for the query against NETLINK - * @param query What to query for. Must be NLQRY_LINK or NLQRY_ADDR. - * - * @return Returns 1 on success, otherwise 0. - */ -int get_etherinfo(struct etherinfo *ethinf, struct nl_handle *nlc, nlQuery query) -{ - struct nl_cache *link_cache; - struct nl_cache *addr_cache; - struct rtnl_addr *addr; - struct rtnl_link *link; - int ret = 0; - - if( !ethinf || !nlc ) { - return 0; - } - - /* Find the interface index we're looking up. - * As we don't expect it to change, we're reusing a "cached" - * interface index if we have that - */ - if( ethinf->index < 0 ) { - link_cache = rtnl_link_alloc_cache(nlc); - ethinf->index = rtnl_link_name2i(link_cache, ethinf->device); - if( ethinf->index < 0 ) { - return 0; - } - nl_cache_free(link_cache); - } - - /* Query the for requested info vai NETLINK */ - switch( query ) { - case NLQRY_LINK: - /* Extract MAC/hardware address of the interface */ - link_cache = rtnl_link_alloc_cache(nlc); - link = rtnl_link_alloc(); - rtnl_link_set_ifindex(link, ethinf->index); - nl_cache_foreach_filter(link_cache, (struct nl_object *)link, callback_nl_link, ethinf); - rtnl_link_put(link); - nl_cache_free(link_cache); - ret = 1; - break; - - case NLQRY_ADDR: - /* Extract IP address information */ - addr_cache = rtnl_addr_alloc_cache(nlc); - addr = rtnl_addr_alloc(); - rtnl_addr_set_ifindex(addr, ethinf->index); - nl_cache_foreach_filter(addr_cache, (struct nl_object *)addr, callback_nl_address, ethinf); - rtnl_addr_put(addr); - nl_cache_free(addr_cache); - ret = 1; - break; - - default: - ret = 0; - } - return ret; -} - diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.h b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.h deleted file mode 100644 index db368db..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.h +++ /dev/null @@ -1,35 +0,0 @@ -/* etherinfo.h - Retrieve ethernet interface info via NETLINK - * - * Copyright (C) 2009-2010 Red Hat Inc. - * - * David Sommerseth <davids(a)redhat.com> - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#ifndef _ETHERINFO_H -#define _ETHERINFO_H - -#include <netlink/addr.h> -#include <netlink/netlink.h> -#include <netlink/handlers.h> -#include <netlink/route/link.h> -#include <netlink/route/addr.h> -#include <arpa/inet.h> - -typedef enum {NLQRY_LINK, NLQRY_ADDR} nlQuery; /**< Supported query types in the etherinfo code */ - -int get_etherinfo(struct etherinfo *ethinf, struct nl_handle *nlc, nlQuery query); -void free_etherinfo(struct etherinfo *ptr); -void dump_etherinfo(FILE *, struct etherinfo *); - -void free_ipv6addresses(struct ipv6address *ptr); - -#endif diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c deleted file mode 100644 index fb751d4..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * Copyright (C) 2009-2010 Red Hat Inc. - * - * David Sommerseth <davids(a)redhat.com> - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -/** - * @file etherinfo_ipv6_obj.c - * @author David Sommerseth <davids(a)redhat.com> - * @date Thu Jul 29 17:51:28 2010 - * - * @brief Python ethtool.etherinfo class functions. - * - */ - -#include <Python.h> -#include "structmember.h" - -#include <netlink/route/rtnl.h> -#include "etherinfo_struct.h" -#include "etherinfo.h" - - -/** - * ethtool.etherinfo_ipv6addr deallocator - cleans up when a object is deleted - * - * @param self etherinfo_ipv6addr_py object structure - */ -void _ethtool_etherinfo_ipv6_dealloc(etherinfo_ipv6addr_py *self) -{ - if( self->addrdata ) { - free_ipv6addresses(self->addrdata); - } - self->ob_type->tp_free((PyObject*)self); -} - - -/** - * ethtool.etherinfo_ipv6addr function, creating a new etherinfo object - * - * @param type - * @param args - * @param kwds - * - * @return Returns in PyObject with the new object on success, otherwise NULL - */ -PyObject *_ethtool_etherinfo_ipv6_new(PyTypeObject *type, PyObject *args, PyObject *kwds) -{ - etherinfo_ipv6addr_py *self; - - self = (etherinfo_ipv6addr_py *)type->tp_alloc(type, 0); - return (PyObject *)self; -} - - -/** - * ethtool.etherinfo_ipv6addr init (constructor) method. Makes sure the object is initialised correctly. - * - * @param self - * @param args - * @param kwds - * - * @return Returns 0 on success. - */ -int _ethtool_etherinfo_ipv6_init(etherinfo_ipv6addr_py *self, PyObject *args, PyObject *kwds) -{ - static char *etherinfo_kwlist[] = {"etherinfo_ipv6_ptr", NULL}; - PyObject *ethinf_ptr = NULL; - - if( !PyArg_ParseTupleAndKeywords(args, kwds, "O", etherinfo_kwlist, &ethinf_ptr)) { - PyErr_SetString(PyExc_AttributeError, "Invalid data pointer to constructor"); - return -1; - } - self->addrdata = (struct ipv6address *) PyCObject_AsVoidPtr(ethinf_ptr); - return 0; -} - -/** - * ethtool.etherinfo_ipv6addr function for retrieving data from a Python object. - * - * @param self - * @param attr_o contains the object member request (which element to return) - * - * @return Returns a PyObject with the value requested on success, otherwise NULL - */ -PyObject *_ethtool_etherinfo_ipv6_getter(etherinfo_ipv6addr_py *self, PyObject *attr_o) -{ - PyObject *ret; - char *attr = PyString_AsString(attr_o); - - if( !self || !self->addrdata ) { - PyErr_SetString(PyExc_AttributeError, "No data available"); - return NULL; - } - - if( strcmp(attr, "address") == 0 ) { - ret = RETURN_STRING(self->addrdata->address); - } else if( strcmp(attr, "netmask") == 0 ) { - ret = PyInt_FromLong(self->addrdata->netmask); - } else if( strcmp(attr, "scope") == 0 ) { - char scope[66]; - - rtnl_scope2str(self->addrdata->scope, scope, 66); - ret = PyString_FromString(scope); - } else { - ret = PyObject_GenericGetAttr((PyObject *)self, attr_o); - } - return ret; -} - - -/** - * ethtool.etherinfo_ipv6addr function for setting a value to a object member. This feature is - * disabled by always returning -1, as the values are read-only by the user. - * - * @param self - * @param attr_o - * @param val_o - * - * @return Returns always -1 (failure). - */ -int _ethtool_etherinfo_ipv6_setter(etherinfo_ipv6addr_py *self, PyObject *attr_o, PyObject *val_o) -{ - PyErr_SetString(PyExc_AttributeError, "etherinfo_ipv6addr member values are read-only."); - return -1; -} - - -/** - * Creates a human readable format of the information when object is being treated as a string - * - * @param self - * - * @return Returns a PyObject with a string with all of the information - */ -PyObject *_ethtool_etherinfo_ipv6_str(etherinfo_ipv6addr_py *self) -{ - char scope[66]; - - if( !self || !self->addrdata ) { - PyErr_SetString(PyExc_AttributeError, "No data available"); - return NULL; - } - - rtnl_scope2str(self->addrdata->scope, scope, 64); - return PyString_FromFormat("[%s] %s/%i", - scope, - self->addrdata->address, - self->addrdata->netmask); -} - - -/** - * This is required by Python, which lists all accessible methods - * in the object. But no methods are provided. - * - */ -static PyMethodDef _ethtool_etherinfo_ipv6_methods[] = { - {NULL} /**< No methods defined */ -}; - -/** - * Defines all accessible object members - * - */ -static PyMemberDef _ethtool_etherinfo_ipv6_members[] = { - {"address", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, - "IPv6 address"}, - {"netmask", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, - "IPv6 netmask"}, - {"scope", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, - "IPv6 IP address scope"}, - {NULL} /* End of member list */ -}; - -/** - * Definition of the functions a Python class/object requires. - * - */ -PyTypeObject ethtool_etherinfoIPv6Type = { - PyObject_HEAD_INIT(NULL) - 0, /*ob_size*/ - "ethtool.etherinfo_ipv6addr", /*tp_name*/ - sizeof(etherinfo_ipv6addr_py), /*tp_basicsize*/ - 0, /*tp_itemsize*/ - (destructor)_ethtool_etherinfo_ipv6_dealloc,/*tp_dealloc*/ - 0, /*tp_print*/ - 0, /*tp_getattr*/ - 0, /*tp_setattr*/ - 0, /*tp_compare*/ - 0, /*tp_repr*/ - 0, /*tp_as_number*/ - 0, /*tp_as_sequence*/ - 0, /*tp_as_mapping*/ - 0, /*tp_hash */ - 0, /*tp_call*/ - (reprfunc)_ethtool_etherinfo_ipv6_str, /*tp_str*/ - (getattrofunc)_ethtool_etherinfo_ipv6_getter, /*tp_getattro*/ - (setattrofunc)_ethtool_etherinfo_ipv6_setter, /*tp_setattro*/ - 0, /*tp_as_buffer*/ - Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ - "IPv6 address information", /* tp_doc */ - 0, /* tp_traverse */ - 0, /* tp_clear */ - 0, /* tp_richcompare */ - 0, /* tp_weaklistoffset */ - 0, /* tp_iter */ - 0, /* tp_iternext */ - _ethtool_etherinfo_ipv6_methods, /* tp_methods */ - _ethtool_etherinfo_ipv6_members, /* tp_members */ - 0, /* tp_getset */ - 0, /* tp_base */ - 0, /* tp_dict */ - 0, /* tp_descr_get */ - 0, /* tp_descr_set */ - 0, /* tp_dictoffset */ - (initproc)_ethtool_etherinfo_ipv6_init, /* tp_init */ - 0, /* tp_alloc */ - _ethtool_etherinfo_ipv6_new, /* tp_new */ -}; - diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.c b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.c deleted file mode 100644 index 04eb634..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Copyright (C) 2009-2010 Red Hat Inc. - * - * David Sommerseth <davids(a)redhat.com> - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - - -/** - * @file etherinfo_obj.c - * @author David Sommerseth <davids(a)redhat.com> - * @date Fri Sep 4 18:41:28 2009 - * - * @brief Python ethtool.etherinfo class functions. - * - */ - -#include <Python.h> -#include "structmember.h" - -#include <netlink/route/rtnl.h> -#include "etherinfo_struct.h" -#include "etherinfo.h" - -extern PyTypeObject ethtool_etherinfoIPv6Type; - -/** - * ethtool.etherinfo deallocator - cleans up when a object is deleted - * - * @param self etherinfo_py object structure - */ -void _ethtool_etherinfo_dealloc(etherinfo_py *self) -{ - if( self->data ) { - if( self->data->ethinfo ) { - free_etherinfo(self->data->ethinfo); - } - free(self->data); - } - self->ob_type->tp_free((PyObject*)self); -} - - -/** - * ethtool.etherinfo function, creating a new etherinfo object - * - * @param type - * @param args - * @param kwds - * - * @return Returns in PyObject with the new object on success, otherwise NULL - */ -PyObject *_ethtool_etherinfo_new(PyTypeObject *type, PyObject *args, PyObject *kwds) -{ - etherinfo_py *self; - - self = (etherinfo_py *)type->tp_alloc(type, 0); - return (PyObject *)self; -} - - -/** - * ethtool.etherinfo init (constructor) method. Makes sure the object is initialised correctly. - * - * @param self - * @param args - * @param kwds - * - * @return Returns 0 on success. - */ -int _ethtool_etherinfo_init(etherinfo_py *self, PyObject *args, PyObject *kwds) -{ - static char *etherinfo_kwlist[] = {"etherinfo_ptr", NULL}; - PyObject *ethinf_ptr = NULL; - - if( !PyArg_ParseTupleAndKeywords(args, kwds, "O", etherinfo_kwlist, &ethinf_ptr)) { - PyErr_SetString(PyExc_AttributeError, "Invalid data pointer to constructor"); - return -1; - } - self->data = (struct etherinfo_obj_data *) PyCObject_AsVoidPtr(ethinf_ptr); - return 0; -} - -/** - * ethtool.etherinfo function for retrieving data from a Python object. - * - * @param self - * @param attr_o contains the object member request (which element to return) - * - * @return Returns a PyObject with the value requested on success, otherwise NULL - */ -PyObject *_ethtool_etherinfo_getter(etherinfo_py *self, PyObject *attr_o) -{ - PyObject *ret; - char *attr = PyString_AsString(attr_o); - - if( !self || !self->data ) { - PyErr_SetString(PyExc_AttributeError, "No data available"); - return NULL; - } - - if( strcmp(attr, "device") == 0 ) { - ret = RETURN_STRING(self->data->ethinfo->device); - } else if( strcmp(attr, "mac_address") == 0 ) { - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_LINK); - ret = RETURN_STRING(self->data->ethinfo->hwaddress); - } else if( strcmp(attr, "ipv4_address") == 0 ) { - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); - ret = RETURN_STRING(self->data->ethinfo->ipv4_address); - } else if( strcmp(attr, "ipv4_netmask") == 0 ) { - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); - ret = PyInt_FromLong(self->data->ethinfo->ipv4_netmask); - } else if( strcmp(attr, "ipv4_broadcast") == 0 ) { - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); - ret = RETURN_STRING(self->data->ethinfo->ipv4_broadcast); - } else { - ret = PyObject_GenericGetAttr((PyObject *)self, attr_o); - } - return ret; -} - -/** - * ethtool.etherinfo function for setting a value to a object member. This feature is - * disabled by always returning -1, as the values are read-only by the user. - * - * @param self - * @param attr_o - * @param val_o - * - * @return Returns always -1 (failure). - */ -int _ethtool_etherinfo_setter(etherinfo_py *self, PyObject *attr_o, PyObject *val_o) -{ - PyErr_SetString(PyExc_AttributeError, "etherinfo member values are read-only."); - return -1; -} - - -/** - * Creates a human readable format of the information when object is being treated as a string - * - * @param self - * - * @return Returns a PyObject with a string with all of the information - */ -PyObject *_ethtool_etherinfo_str(etherinfo_py *self) -{ - PyObject *ret = NULL; - - if( !self || !self->data || !self->data->nlc || !self->data->ethinfo ) { - PyErr_SetString(PyExc_AttributeError, "No data available"); - return NULL; - } - - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_LINK); - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); - - ret = PyString_FromFormat("Device %s:\n", self->data->ethinfo->device); - if( self->data->ethinfo->hwaddress ) { - PyObject *tmp = PyString_FromFormat("\tMAC address: %s\n", self->data->ethinfo->hwaddress); - PyString_Concat(&ret, tmp); - } - - if( self->data->ethinfo->ipv4_address ) { - PyObject *tmp = PyString_FromFormat("\tIPv4 address: %s/%i", - self->data->ethinfo->ipv4_address, - self->data->ethinfo->ipv4_netmask); - if( self->data->ethinfo->ipv4_broadcast ) { - PyObject *tmp2 = PyString_FromFormat(" Broadcast: %s", - self->data->ethinfo->ipv4_broadcast); - PyString_Concat(&tmp, tmp2); - } - PyString_Concat(&tmp, PyString_FromString("\n")); - PyString_Concat(&ret, tmp); - } - - if( self->data->ethinfo->ipv6_addresses ) { - struct ipv6address *ipv6 = self->data->ethinfo->ipv6_addresses; - PyObject *tmp = PyString_FromFormat("\tIPv6 addresses:\n"); - PyString_Concat(&ret, tmp); - - for( ; ipv6; ipv6 = ipv6->next) { - char scope[66]; - - rtnl_scope2str(ipv6->scope, scope, 64); - PyObject *addr = PyString_FromFormat("\t [%s] %s/%i\n", - scope, ipv6->address, ipv6->netmask); - PyString_Concat(&ret, addr); - } - } - return ret; -} - - -/** - * Returns a tuple list of ethertool.etherinfo_ipv6addr objects, containing configured - * IPv6 addresses - * - * @param self - * @param notused - * - * @return Returns a Python tuple list of ethertool.etherinfo_ipv6addr objects - */ -PyObject * _ethtool_etherinfo_get_ipv6_addresses(etherinfo_py *self, PyObject *notused) { - PyObject *ret; - struct ipv6address *ipv6 = NULL; - int i = 0; - - if( !self || !self->data ) { - PyErr_SetString(PyExc_AttributeError, "No data available"); - return NULL; - } - - get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); - ipv6 = self->data->ethinfo->ipv6_addresses; - ret = PyTuple_New(1); - while( ipv6 ) { - PyObject *ipv6_pyobj = NULL, *ipv6_pydata = NULL, *args = NULL; - struct ipv6address *next = ipv6->next; - - ipv6->next = NULL; - ipv6_pydata = PyCObject_FromVoidPtr(ipv6, NULL); - args = PyTuple_New(1); - PyTuple_SetItem(args, 0, ipv6_pydata); - ipv6_pyobj = PyObject_CallObject((PyObject *)&ethtool_etherinfoIPv6Type, args); - if( ipv6_pyobj ) { - PyTuple_SetItem(ret, i++, ipv6_pyobj); - _PyTuple_Resize(&ret, i+1); - Py_INCREF(ipv6_pyobj); - } - ipv6 = next; - } - _PyTuple_Resize(&ret, i); - return ret; -} - - -/** - * Defines all available methods in the ethtool.etherinfo class - * - */ -static PyMethodDef _ethtool_etherinfo_methods[] = { - {"get_ipv6_addresses", _ethtool_etherinfo_get_ipv6_addresses, METH_NOARGS, - "Retrieve configured IPv6 addresses. Returns a tuple list of etherinfo_ipv6addr objects"}, - {NULL} /**< No methods defined */ -}; - -/** - * Defines all accessible object members - * - */ -static PyMemberDef _ethtool_etherinfo_members[] = { - {"device", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, - "Device name of the interface"}, - {"mac_address", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, - "MAC address / hardware address of the interface"}, - {"ipv4_address", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, - "IPv4 address"}, - {"ipv4_netmask", T_INT, offsetof(etherinfo_py, data), 0, - "IPv4 netmask in bits"}, - {"ipv4_broadcast", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, - "IPv4 broadcast address"}, - {NULL} /* End of member list */ -}; - -/** - * Definition of the functions a Python class/object requires. - * - */ -PyTypeObject ethtool_etherinfoType = { - PyObject_HEAD_INIT(NULL) - 0, /*ob_size*/ - "ethtool.etherinfo", /*tp_name*/ - sizeof(etherinfo_py), /*tp_basicsize*/ - 0, /*tp_itemsize*/ - (destructor)_ethtool_etherinfo_dealloc,/*tp_dealloc*/ - 0, /*tp_print*/ - 0, /*tp_getattr*/ - 0, /*tp_setattr*/ - 0, /*tp_compare*/ - 0, /*tp_repr*/ - 0, /*tp_as_number*/ - 0, /*tp_as_sequence*/ - 0, /*tp_as_mapping*/ - 0, /*tp_hash */ - 0, /*tp_call*/ - (reprfunc)_ethtool_etherinfo_str, /*tp_str*/ - (getattrofunc)_ethtool_etherinfo_getter, /*tp_getattro*/ - (setattrofunc)_ethtool_etherinfo_setter, /*tp_setattro*/ - 0, /*tp_as_buffer*/ - Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ - "Contains information about a specific ethernet device", /* tp_doc */ - 0, /* tp_traverse */ - 0, /* tp_clear */ - 0, /* tp_richcompare */ - 0, /* tp_weaklistoffset */ - 0, /* tp_iter */ - 0, /* tp_iternext */ - _ethtool_etherinfo_methods, /* tp_methods */ - _ethtool_etherinfo_members, /* tp_members */ - 0, /* tp_getset */ - 0, /* tp_base */ - 0, /* tp_dict */ - 0, /* tp_descr_get */ - 0, /* tp_descr_set */ - 0, /* tp_dictoffset */ - (initproc)_ethtool_etherinfo_init, /* tp_init */ - 0, /* tp_alloc */ - _ethtool_etherinfo_new, /* tp_new */ -}; - diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.h b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.h deleted file mode 100644 index ce77f79..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (C) 2009-2010 Red Hat Inc. - * - * David Sommerseth <davids(a)redhat.com> - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -/** - * @file etherinfo_obj.c - * @author David Sommerseth <davids(a)redhat.com> - * @date Fri Sep 4 18:41:28 2009 - * - * @brief Python ethtool.etherinfo class functions (header file). - * - */ - -#ifndef __ETHERINFO_OBJ_H -#define __ETHERINFO_OBJ_H - -#include <Python.h> -#include "etherinfo_struct.h" - -void _ethtool_etherinfo_dealloc(etherinfo_py *); -PyObject *_ethtool_etherinfo_new(PyTypeObject *, PyObject *, PyObject *); -int _ethtool_etherinfo_init(etherinfo_py *, PyObject *, PyObject *); -PyObject *_ethtool_etherinfo_getter(etherinfo_py *, PyObject *); -int _ethtool_etherinfo_setter(etherinfo_py *, PyObject *, PyObject *); -PyObject *_ethtool_etherinfo_str(etherinfo_py *self); - -#endif diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_struct.h b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_struct.h deleted file mode 100644 index b1d453f..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_struct.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2009-2010 Red Hat Inc. - * - * David Sommerseth <davids(a)redhat.com> - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -/** - * @file etherinfo_struct.h - * @author David Sommerseth <dsommers(a)wsdsommers.usersys.redhat.com> - * @date Fri Sep 4 19:06:06 2009 - * - * @brief Contains the internal ethtool.etherinfo data structure - * - */ - -#ifndef _ETHERINFO_STRUCT_H -#define _ETHERINFO_STRUCT_H - -/** - * Contains IP address information about a particular ethernet device - * - */ -struct etherinfo { - char *device; /**< Device name */ - int index; /**< NETLINK index reference */ - char *hwaddress; /**< HW address / MAC address of device */ - char *ipv4_address; /**< Configured IPv4 address */ - int ipv4_netmask; /**< Configured IPv4 netmask */ - char *ipv4_broadcast; /**< Configured IPv4 broadcast address */ - struct ipv6address *ipv6_addresses; /**< Configured IPv6 addresses (as a pointer chain) */ -}; - - -/** - * Pointer chain with IPv6 addresses associated with a ethernet interface. Used - * by struct etherinfo - */ -struct ipv6address { - char *address; /**< Configured IPv6 address */ - int netmask; /**< Configured IPv6 netmask */ - int scope; /**< Scope for the IPv6 address */ - struct ipv6address *next; /**< Pointer to next configured IPv6 address */ -}; - - -/** - * Contains the internal data structure of the - * ethtool.etherinfo object. - * - */ -struct etherinfo_obj_data { - struct nl_handle *nlc; /**< Contains NETLINK connection info */ - struct etherinfo *ethinfo; /**< Contains info about our current interface */ -}; - -/** - * A Python object of struct etherinfo_obj_data - * - */ -typedef struct { - PyObject_HEAD - struct etherinfo_obj_data *data; /* IPv4 and IPv6 address information, only one element used */ -} etherinfo_py; - -/** - * A Python object of struct ipv6address - * - */ -typedef struct { - PyObject_HEAD - struct ipv6address *addrdata; /**< IPv6 address, only one element is used in this case */ -} etherinfo_ipv6addr_py; - -/** - * NULL safe PyString_FromString() wrapper. If input string is NULL, None will be returned - * - * @param str Input C string (char *) - * - * @return Returns a PyObject with either the input string wrapped up, or a Python None value. - */ -#define RETURN_STRING(str) (str ? PyString_FromString(str) : Py_None) - -#endif diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/ethtool-copy.h b/spec-tree/python-ethtool-0.5/python-ethtool/ethtool-copy.h deleted file mode 100644 index e5b7832..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/ethtool-copy.h +++ /dev/null @@ -1,373 +0,0 @@ -/* - * ethtool.h: Defines for Linux ethtool. - * - * Copyright (C) 1998 David S. Miller (davem(a)redhat.com) - * Copyright 2001 Jeff Garzik <jgarzik(a)mandrakesoft.com> - * Portions Copyright 2001 Sun Microsystems (thockin(a)sun.com) - * Portions Copyright 2002 Intel (eli.kupermann(a)intel.com, - * christopher.leech(a)intel.com, - * scott.feldman(a)intel.com) - */ - -#ifndef _LINUX_ETHTOOL_H -#define _LINUX_ETHTOOL_H - -#ifndef __unused -#define __unused __attribute__ ((unused)) -#endif - -/* This should work for both 32 and 64 bit userland. */ -struct ethtool_cmd { - u32 cmd; - u32 supported; /* Features this interface supports */ - u32 advertising; /* Features this interface advertises */ - u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ - u8 duplex; /* Duplex, half or full */ - u8 port; /* Which connector port */ - u8 phy_address; - u8 transceiver; /* Which tranceiver to use */ - u8 autoneg; /* Enable or disable autonegotiation */ - u32 maxtxpkt; /* Tx pkts before generating tx int */ - u32 maxrxpkt; /* Rx pkts before generating rx int */ - u32 reserved[4]; -}; - -#define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ -struct ethtool_drvinfo { - u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[32]; /* firmware version string, if applicable */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_dev->slot_name. */ - char reserved1[32]; - char reserved2[16]; - u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ - u32 testinfo_len; - u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ -}; - -#define SOPASS_MAX 6 -/* wake-on-lan settings */ -struct ethtool_wolinfo { - u32 cmd; - u32 supported; - u32 wolopts; - u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ -}; - -/* for passing single values */ -struct ethtool_value { - u32 cmd; - u32 data; -}; - -/* for passing big chunks of data */ -struct ethtool_regs { - u32 cmd; - u32 version; /* driver-specific, indicates different chips/revs */ - u32 len; /* bytes */ - u8 data[0]; -}; - -/* for passing EEPROM chunks */ -struct ethtool_eeprom { - u32 cmd; - u32 magic; - u32 offset; /* in bytes */ - u32 len; /* in bytes */ - u8 data[0]; -}; - -/* for configuring coalescing parameters of chip */ -struct ethtool_coalesce { - u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ - u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ - u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being services by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ - u32 rx_coalesce_usecs_irq; - u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ - u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ - u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being services by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ - u32 tx_coalesce_usecs_irq; - u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ - u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ - u32 use_adaptive_rx_coalesce; - u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ - u32 pkt_rate_low; - u32 rx_coalesce_usecs_low; - u32 rx_max_coalesced_frames_low; - u32 tx_coalesce_usecs_low; - u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ - u32 pkt_rate_high; - u32 rx_coalesce_usecs_high; - u32 rx_max_coalesced_frames_high; - u32 tx_coalesce_usecs_high; - u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ - u32 rate_sample_interval; -}; - -/* for configuring RX/TX ring parameters */ -struct ethtool_ringparam { - u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ - u32 rx_max_pending; - u32 rx_mini_max_pending; - u32 rx_jumbo_max_pending; - u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ - u32 rx_pending; - u32 rx_mini_pending; - u32 rx_jumbo_pending; - u32 tx_pending; -}; - -/* for configuring link flow control parameters */ -struct ethtool_pauseparam { - u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autonet' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ - u32 autoneg; - u32 rx_pause; - u32 tx_pause; -}; - -#define ETH_GSTRING_LEN 32 -enum ethtool_stringset { - ETH_SS_TEST = 0, - ETH_SS_STATS, -}; - -/* for passing string sets for data tagging */ -struct ethtool_gstrings { - u32 cmd; /* ETHTOOL_GSTRINGS */ - u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - u32 len; /* number of strings in the string set */ - u8 data[0]; -}; - -enum ethtool_test_flags { - ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ - ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ -}; - -/* for requesting NIC test and getting results*/ -struct ethtool_test { - u32 cmd; /* ETHTOOL_TEST */ - u32 flags; /* ETH_TEST_FL_xxx */ - u32 reserved; - u32 len; /* result length, in number of u64 elements */ - u64 data[0]; -}; - -/* for dumping NIC-specific statistics */ -struct ethtool_stats { - u32 cmd; /* ETHTOOL_GSTATS */ - u32 n_stats; /* number of u64's being returned */ - u64 data[0]; -}; - -/* CMDs currently supported */ -#define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings, privileged. */ -#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers, privileged. */ -#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ -#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options, priv. */ -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv. */ -#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data, priv. */ -#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config, priv. */ -#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ -#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters, priv. */ -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ -#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable - * (ethtool_value) */ -#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value), priv. */ -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ -#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ -#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ -#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ -#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ -#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ -#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ -#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ -#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ - -/* compatibility with older code */ -#define SPARC_ETH_GSET ETHTOOL_GSET -#define SPARC_ETH_SSET ETHTOOL_SSET - -/* Indicates what features are supported by the interface. */ -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) - -/* Indicates what features are advertised by the interface. */ -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) - -/* The following are all involved in forcing a particular link - * mode for the device for setting things. When getting the - * devices settings, these indicate the current mode and whether - * it was foced up into this mode or autonegotiated. - */ - -/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */ -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define SPEED_10000 10000 - -/* Duplex, half or full. */ -#define DUPLEX_HALF 0x00 -#define DUPLEX_FULL 0x01 - -/* Which connector port. */ -#define PORT_TP 0x00 -#define PORT_AUI 0x01 -#define PORT_MII 0x02 -#define PORT_FIBRE 0x03 -#define PORT_BNC 0x04 - -/* Which tranceiver to use. */ -#define XCVR_INTERNAL 0x00 -#define XCVR_EXTERNAL 0x01 -#define XCVR_DUMMY1 0x02 -#define XCVR_DUMMY2 0x03 -#define XCVR_DUMMY3 0x04 - -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ -#define AUTONEG_DISABLE 0x00 -#define AUTONEG_ENABLE 0x01 - -/* Wake-On-Lan options. */ -#define WAKE_PHY (1 << 0) -#define WAKE_UCAST (1 << 1) -#define WAKE_MCAST (1 << 2) -#define WAKE_BCAST (1 << 3) -#define WAKE_ARP (1 << 4) -#define WAKE_MAGIC (1 << 5) -#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ - -#endif /* _LINUX_ETHTOOL_H */ diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/ethtool.c b/spec-tree/python-ethtool-0.5/python-ethtool/ethtool.c deleted file mode 100644 index feb6917..0000000 --- a/spec-tree/python-ethtool-0.5/python-ethtool/ethtool.c +++ /dev/null @@ -1,1062 +0,0 @@ -/* - * Copyright (C) 2008-2010 Red Hat Inc. - * - * Arnaldo Carvalho de Melo <acme(a)redhat.com> - * David Sommerseth <davids(a)redhat.com> - * - * First bits from a Red Hat config tool by Harald Hoyer. - * - * This application is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2. - * - * This application is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ -#include <Python.h> - -#include <errno.h> -#include <stddef.h> -#include <stdint.h> -#include <unistd.h> -#include <sys/socket.h> -#include <net/if.h> -#include <sys/socket.h> -#include <sys/ioctl.h> -#include <sys/types.h> - -#include "etherinfo_struct.h" -#include "etherinfo_obj.h" -#include "etherinfo.h" - -static struct nl_handle *nlconnection = NULL; -extern PyTypeObject ethtool_etherinfoType; -extern PyTypeObject ethtool_etherinfoIPv6Type; - -#ifndef IFF_DYNAMIC -#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ -#endif - -typedef unsigned long long u64; -typedef __uint32_t u32; -typedef __uint16_t u16; -typedef __uint8_t u8; - -#include "ethtool-copy.h" -#include <linux/sockios.h> /* for SIOCETHTOOL */ - -#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) - -#define _PATH_PROCNET_DEV "/proc/net/dev" - -static PyObject *get_active_devices(PyObject *self __unused, PyObject *args __unused) -{ - PyObject *list; - int numreqs = 30; - struct ifconf ifc; - struct ifreq *ifr; - int n; - - /* SIOCGIFCONF currently seems to only work properly on AF_INET sockets - (as of 2.1.128) */ - /* Open control socket. */ - int skfd = socket(AF_INET, SOCK_DGRAM, 0); - - if (skfd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - ifc.ifc_buf = NULL; - for (;;) { - ifc.ifc_len = sizeof(struct ifreq) * numreqs; - ifc.ifc_buf = realloc(ifc.ifc_buf, ifc.ifc_len); - - if (ioctl(skfd, SIOCGIFCONF, &ifc) < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - free(ifc.ifc_buf); - close(skfd); - return NULL; - } - - if (ifc.ifc_len == (int)sizeof(struct ifreq) * numreqs) { - /* assume it overflowed and try again */ - numreqs += 10; - continue; - } - break; - } - - list = PyList_New(0); - ifr = ifc.ifc_req; - for (n = 0; n < ifc.ifc_len; n += sizeof(struct ifreq)) { - if (!(ioctl(skfd, SIOCGIFFLAGS, ifr) < 0)) - if (ifr->ifr_flags & IFF_UP) - PyList_Append(list, PyString_FromString(ifr->ifr_name)); - ifr++; - } - - free(ifc.ifc_buf); - close(skfd); - - return list; -} - -static PyObject *get_devices(PyObject *self __unused, PyObject *args __unused) -{ - char buffer[256]; - char *ret;; - PyObject *list = PyList_New(0); - FILE *fd = fopen(_PATH_PROCNET_DEV, "r"); - - if (fd == NULL) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - /* skip over first two lines */ - ret = fgets(buffer, 256, fd); ret = fgets(buffer, 256, fd); - while (!feof(fd)) { - char *name = buffer; - char *end = buffer; - - if (fgets(buffer, 256, fd) == NULL) - break; - /* find colon */ - while (end && *end != ':') - end++; - *end = 0; /* terminate where colon was */ - while (*name == ' ') - name++; /* skip over leading whitespace if any */ - PyList_Append(list, PyString_FromString(name)); - } - fclose(fd); - return list; -} - -static PyObject *get_hwaddress(PyObject *self __unused, PyObject *args) -{ - struct ifreq ifr; - int fd, err; - char *devname; - char hwaddr[20]; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our request structure. */ - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCGIFHWADDR, &ifr); - if (err < 0) { - char buf[2048]; - int eno = errno; - - snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - close(fd); - return NULL; - } - - close(fd); - - sprintf(hwaddr, "%02x:%02x:%02x:%02x:%02x:%02x", - (unsigned int)ifr.ifr_hwaddr.sa_data[0] % 256, - (unsigned int)ifr.ifr_hwaddr.sa_data[1] % 256, - (unsigned int)ifr.ifr_hwaddr.sa_data[2] % 256, - (unsigned int)ifr.ifr_hwaddr.sa_data[3] % 256, - (unsigned int)ifr.ifr_hwaddr.sa_data[4] % 256, - (unsigned int)ifr.ifr_hwaddr.sa_data[5] % 256); - - return PyString_FromString(hwaddr); -} - -static PyObject *get_ipaddress(PyObject *self __unused, PyObject *args) -{ - struct ifreq ifr; - int fd, err; - char *devname; - char ipaddr[20]; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our request structure. */ - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCGIFADDR, &ifr); - if (err < 0) { - char buf[2048]; - int eno = errno; - snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - close(fd); - return NULL; - } - - close(fd); - - sprintf(ipaddr, "%u.%u.%u.%u", - (unsigned int)ifr.ifr_addr.sa_data[2] % 256, - (unsigned int)ifr.ifr_addr.sa_data[3] % 256, - (unsigned int)ifr.ifr_addr.sa_data[4] % 256, - (unsigned int)ifr.ifr_addr.sa_data[5] % 256); - - return PyString_FromString(ipaddr); -} - - -/** - * Retrieves the current information about all interfaces. All interfaces will be - * returned as a list of objects per interface. - * - * @param self Not used - * @param args Python arguments - * - * @return Python list of objects on success, otherwise NULL. - */ -static PyObject *get_interfaces_info(PyObject *self __unused, PyObject *args) { - PyObject *devlist = NULL, *ethinf_py = NULL; - PyObject *inargs = NULL; - char **fetch_devs; - int i = 0, fetch_devs_len = 0; - - if (!PyArg_ParseTuple(args, "|O", &inargs)) { - PyErr_SetString(PyExc_LookupError, - "Argument must be either a string, list or a tuple"); - return NULL; - } - - /* Parse input arguments if we got them */ - if( inargs != NULL ) { - if( PyString_Check(inargs) ) { /* Input argument is just a string */ - fetch_devs_len = 1; - fetch_devs = calloc(1, sizeof(char *)); - fetch_devs[0] = PyString_AsString(inargs); - } else if( PyTuple_Check(inargs) ) { /* Input argument is a tuple list with devices */ - int j = 0; - - fetch_devs_len = PyTuple_Size(inargs); - fetch_devs = calloc(fetch_devs_len+1, sizeof(char *)); - for( i = 0; i < fetch_devs_len; i++ ) { - PyObject *elmt = PyTuple_GetItem(inargs, i); - if( elmt && PyString_Check(elmt) ) { - fetch_devs[j++] = PyString_AsString(elmt); - } - } - fetch_devs_len = j; - } else if( PyList_Check(inargs) ) { /* Input argument is a list with devices */ - int j = 0; - - fetch_devs_len = PyList_Size(inargs); - fetch_devs = calloc(fetch_devs_len+1, sizeof(char *)); - for( i = 0; i < fetch_devs_len; i++ ) { - PyObject *elmt = PyList_GetItem(inargs, i); - if( elmt && PyString_Check(elmt) ) { - fetch_devs[j++] = PyString_AsString(elmt); - } - } - fetch_devs_len = j; - } else { - PyErr_SetString(PyExc_LookupError, - "Argument must be either a string, list or a tuple"); - return NULL; - } - } - - devlist = PyList_New(0); - for( i = 0; i < fetch_devs_len; i++ ) { - struct etherinfo_obj_data *objdata = NULL; - - /* Allocate memory for data structures for each device */ - objdata = calloc(1, sizeof(struct etherinfo_obj_data)); - if( !objdata ) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - objdata->ethinfo = calloc(1, sizeof(struct etherinfo)); - if( !objdata->ethinfo ) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Store the device name and a reference to the NETLINK connection for - * objects to use when quering for device info - */ - objdata->ethinfo->device = strdup(fetch_devs[i]); - objdata->ethinfo->index = -1; - objdata->nlc = nlconnection; /* Global variable */ - - /* Instantiate a new etherinfo object with the device information */ - ethinf_py = PyCObject_FromVoidPtr(objdata, NULL); - if( ethinf_py ) { - /* Prepare the argument list for the object constructor */ - PyObject *args = PyTuple_New(1); - PyTuple_SetItem(args, 0, ethinf_py); - - /* Create the object */ - PyObject *dev = PyObject_CallObject((PyObject *)&ethtool_etherinfoType, args); - if( dev ) { - PyList_Append(devlist, dev); - } - } - } - if( fetch_devs_len > 0 ) { - free(fetch_devs); - } - - return devlist; -} - - -static PyObject *get_flags (PyObject *self __unused, PyObject *args) -{ - struct ifreq ifr; - char *devname; - int fd, err; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our request structure. */ - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - err = ioctl(fd, SIOCGIFFLAGS, &ifr); - if(err < 0) { - char buf[2048]; - int eno = errno; - snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - close(fd); - return NULL; - } - - close(fd); - - return Py_BuildValue("h", ifr.ifr_flags); - - -} -static PyObject *get_netmask (PyObject *self __unused, PyObject *args) -{ - struct ifreq ifr; - int fd, err; - char *devname; - char netmask[20]; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our request structure. */ - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCGIFNETMASK, &ifr); - if (err < 0) { - char buf[2048]; - int eno = errno; - snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - close(fd); - return NULL; - } - - close(fd); - - sprintf(netmask, "%u.%u.%u.%u", - (unsigned int)ifr.ifr_netmask.sa_data[2] % 256, - (unsigned int)ifr.ifr_netmask.sa_data[3] % 256, - (unsigned int)ifr.ifr_netmask.sa_data[4] % 256, - (unsigned int)ifr.ifr_netmask.sa_data[5] % 256); - - return PyString_FromString(netmask); -} - -static PyObject *get_broadcast(PyObject *self __unused, PyObject *args) -{ - struct ifreq ifr; - int fd, err; - char *devname; - char broadcast[20]; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our request structure. */ - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCGIFBRDADDR, &ifr); - if (err < 0) { - char buf[2048]; - int eno = errno; - snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - close(fd); - return NULL; - } - - close(fd); - - sprintf(broadcast, "%u.%u.%u.%u", - (unsigned int)ifr.ifr_broadaddr.sa_data[2] % 256, - (unsigned int)ifr.ifr_broadaddr.sa_data[3] % 256, - (unsigned int)ifr.ifr_broadaddr.sa_data[4] % 256, - (unsigned int)ifr.ifr_broadaddr.sa_data[5] % 256); - - return PyString_FromString(broadcast); -} - -static PyObject *get_module(PyObject *self __unused, PyObject *args) -{ - struct ethtool_cmd ecmd; - struct ifreq ifr; - int fd, err; - char buf[2048]; - char *devname; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our control structures. */ - memset(&ecmd, 0, sizeof(ecmd)); - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - ifr.ifr_data = (caddr_t) &buf; - ecmd.cmd = ETHTOOL_GDRVINFO; - memcpy(&buf, &ecmd, sizeof(ecmd)); - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCETHTOOL, &ifr); - - if (err < 0) { /* failed? */ - int eno = errno; - FILE *file; - int found = 0; - char driver[100], dev[100]; - close(fd); - - /* Before bailing, maybe it is a PCMCIA/PC Card? */ - file = fopen("/var/lib/pcmcia/stab", "r"); - if (file == NULL) { - sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - return NULL; - } - - while (!feof(file)) { - if (fgets(buf, 2048, file) == NULL) - break; - buf[2047] = '\0'; - if (strncmp(buf, "Socket", 6) != 0) { - if (sscanf(buf, "%*d\t%*s\t%100s\t%*d\t%100s\n", driver, dev) > 0) { - driver[99] = '\0'; - dev[99] = '\0'; - if (strcmp(devname, dev) == 0) { - found = 1; - break; - } - } - } - } - fclose(file); - if (!found) { - sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - return NULL; - } else - return PyString_FromString(driver); - } - - close(fd); - return PyString_FromString(((struct ethtool_drvinfo *)buf)->driver); -} - -static PyObject *get_businfo(PyObject *self __unused, PyObject *args) -{ - struct ethtool_cmd ecmd; - struct ifreq ifr; - int fd, err; - char buf[1024]; - char *devname; - - if (!PyArg_ParseTuple(args, "s", &devname)) - return NULL; - - /* Setup our control structures. */ - memset(&ecmd, 0, sizeof(ecmd)); - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - ifr.ifr_data = (caddr_t) &buf; - ecmd.cmd = ETHTOOL_GDRVINFO; - memcpy(&buf, &ecmd, sizeof(ecmd)); - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0); - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return NULL; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCETHTOOL, &ifr); - - if (err < 0) { /* failed? */ - int eno = errno; - close(fd); - - sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); - PyErr_SetString(PyExc_IOError, buf); - return NULL; - } - - close(fd); - return PyString_FromString(((struct ethtool_drvinfo *)buf)->bus_info); -} - -static int send_command(int cmd, char *devname, void *value) -{ - /* Setup our request structure. */ - int fd, err; - struct ifreq ifr; - struct ethtool_value *eval = value; - - memset(&ifr, 0, sizeof(ifr)); - strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); - ifr.ifr_name[IFNAMSIZ - 1] = 0; - ifr.ifr_data = (caddr_t)eval; - eval->cmd = cmd; - - /* Open control socket. */ - fd = socket(AF_INET, SOCK_DGRAM, 0), err; - if (fd < 0) { - PyErr_SetString(PyExc_OSError, strerror(errno)); - return -1; - } - - /* Get current settings. */ - err = ioctl(fd, SIOCETHTOOL, &ifr); - if (err < 0) { - char buf[2048]; - sprintf(buf, "[Errno %d] %s", errno, strerror(errno)); - PyErr_SetString(PyExc_IOError, buf); - } - - close(fd); - return err; -} - -static int get_dev_value(int cmd, PyObject *args, void *value) -{ - char *devname; - int err = -1; - - if (PyArg_ParseTuple(args, "s", &devname)) - err = send_command(cmd, devname, value); - - return err; -} - -static int get_dev_int_value(int cmd, PyObject *args, int *value) -{ - struct ethtool_value eval; - int rc = get_dev_value(cmd, args, &eval); - - if (rc == 0) - *value = *(int *)&eval.data; - - return rc; -} - -static int dev_set_int_value(int cmd, PyObject *args) -{ - struct ethtool_value eval; - char *devname; - - if (!PyArg_ParseTuple(args, "si", &devname, &eval.data)) - return -1; - - return send_command(cmd, devname, &eval); -} - -static PyObject *get_tso(PyObject *self __unused, PyObject *args) -{ - int value = 0; - - if (get_dev_int_value(ETHTOOL_GTSO, args, &value) < 0) - return NULL; - - return Py_BuildValue("b", value); -} - -static PyObject *set_tso(PyObject *self __unused, PyObject *args) -{ - if (dev_set_int_value(ETHTOOL_STSO, args) < 0) - return NULL; - - Py_INCREF(Py_None); - return Py_None; -} - -static PyObject *get_ufo(PyObject *self __unused, PyObject *args) -{ - int value = 0; - - if (get_dev_int_value(ETHTOOL_GUFO, args, &value) < 0) - return NULL; - - return Py_BuildValue("b", value); -} - -static PyObject *get_gso(PyObject *self __unused, PyObject *args) -{ - int value = 0; - - if (get_dev_int_value(ETHTOOL_GGSO, args, &value) < 0) - return NULL; - - return Py_BuildValue("b", value); -} - -static PyObject *get_sg(PyObject *self __unused, PyObject *args) -{ - int value = 0; - - if (get_dev_int_value(ETHTOOL_GSG, args, &value) < 0) - return NULL; - - return Py_BuildValue("b", value); -} - -struct struct_desc { - char *name; - unsigned short offset; - unsigned short size; -}; - -#define member_desc(type, member_name) { \ - .name = #member_name, \ - .offset = offsetof(type, member_name), \ - .size = sizeof(((type *)0)->member_name), } - -struct struct_desc ethtool_coalesce_desc[] = { - member_desc(struct ethtool_coalesce, rx_coalesce_usecs), - member_desc(struct ethtool_coalesce, rx_max_coalesced_frames), - member_desc(struct ethtool_coalesce, rx_coalesce_usecs_irq), - member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_irq), - member_desc(struct ethtool_coalesce, tx_coalesce_usecs), - member_desc(struct ethtool_coalesce, tx_max_coalesced_frames), - member_desc(struct ethtool_coalesce, tx_coalesce_usecs_irq), - member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_irq), - member_desc(struct ethtool_coalesce, stats_block_coalesce_usecs), - member_desc(struct ethtool_coalesce, use_adaptive_rx_coalesce), - member_desc(struct ethtool_coalesce, use_adaptive_tx_coalesce), - member_desc(struct ethtool_coalesce, pkt_rate_low), - member_desc(struct ethtool_coalesce, rx_coalesce_usecs_low), - member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_low), - member_desc(struct ethtool_coalesce, tx_coalesce_usecs_low), - member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_low), - member_desc(struct ethtool_coalesce, pkt_rate_high), - member_desc(struct ethtool_coalesce, rx_coalesce_usecs_high), - member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_high), - member_desc(struct ethtool_coalesce, tx_coalesce_usecs_high), - member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_high), - member_desc(struct ethtool_coalesce, rate_sample_interval), -}; - -static PyObject *__struct_desc_create_dict(struct struct_desc *table, - int nr_entries, void *values) -{ - int i; - PyObject *dict = PyDict_New(); - - if (dict == NULL) - goto out; - - for (i = 0; i < nr_entries; ++i) { - struct struct_desc *d = &table[i]; - PyObject *objval = NULL; - void *val = values + d->offset; - - switch (d->size) { - case sizeof(uint32_t): - objval = PyInt_FromLong(*(uint32_t *)val); - break; - } - - if (objval == NULL) - goto free_dict; - - if (PyDict_SetItemString(dict, d->name, objval) != 0) { - Py_DECREF(objval); - goto free_dict; - } - - Py_DECREF(objval); - } -out: - return dict; -free_dict: - goto out; - dict = NULL; -} - -#define struct_desc_create_dict(table, values) \ - __struct_desc_create_dict(table, ARRAY_SIZE(table), values) - -static int __struct_desc_from_dict(struct struct_desc *table, - int nr_entries, void *to, PyObject *dict) -{ - char buf[2048]; - int i; - - for (i = 0; i < nr_entries; ++i) { - struct struct_desc *d = &table[i]; - void *val = to + d->offset; - PyObject *obj; - - switch (d->size) { - case sizeof(uint32_t): - obj = PyDict_GetItemString(dict, d->name); - if (obj == NULL) { - snprintf(buf, sizeof(buf), - "Missing dict entry for field %s", - d->name); - PyErr_SetString(PyExc_IOError, buf); - return -1; - } - *(uint32_t *)val = PyInt_AsLong(obj); - break; - default: - snprintf(buf, sizeof(buf), - "Invalid type size %d for field %s", - d->size, d->name); - PyErr_SetString(PyExc_IOError, buf); - return -1; - } - } - - return 0; -} - -#define struct_desc_from_dict(table, to, dict) \ - __struct_desc_from_dict(table, ARRAY_SIZE(table), to, dict) - -static PyObject *get_coalesce(PyObject *self __unused, PyObject *args) -{ - struct ethtool_coalesce coal; - - if (get_dev_value(ETHTOOL_GCOALESCE, args, &coal) < 0) - return NULL; - - return struct_desc_create_dict(ethtool_coalesce_desc, &coal); -} - -static PyObject *set_coalesce(PyObject *self __unused, PyObject *args) -{ - struct ethtool_coalesce coal; - char *devname; - PyObject *dict; - - if (!PyArg_ParseTuple(args, "sO", &devname, &dict)) - return NULL; - - if (struct_desc_from_dict(ethtool_coalesce_desc, &coal, dict) != 0) - return NULL; - - if (send_command(ETHTOOL_SCOALESCE, devname, &coal)) - return NULL; - - Py_INCREF(Py_None); - return Py_None; -} - -struct struct_desc ethtool_ringparam_desc[] = { - member_desc(struct ethtool_ringparam, rx_max_pending), - member_desc(struct ethtool_ringparam, rx_mini_max_pending), - member_desc(struct ethtool_ringparam, rx_jumbo_max_pending), - member_desc(struct ethtool_ringparam, tx_max_pending), - member_desc(struct ethtool_ringparam, rx_pending), - member_desc(struct ethtool_ringparam, rx_mini_pending), - member_desc(struct ethtool_ringparam, rx_jumbo_pending), - member_desc(struct ethtool_ringparam, tx_pending), -}; - -static PyObject *get_ringparam(PyObject *self __unused, PyObject *args) -{ - struct ethtool_ringparam ring; - - if (get_dev_value(ETHTOOL_GRINGPARAM, args, &ring) < 0) - return NULL; - - return struct_desc_create_dict(ethtool_ringparam_desc, &ring); -} - -static PyObject *set_ringparam(PyObject *self __unused, PyObject *args) -{ - struct ethtool_ringparam ring; - char *devname; - PyObject *dict; - - if (!PyArg_ParseTuple(args, "sO", &devname, &dict)) - return NULL; - - if (struct_desc_from_dict(ethtool_ringparam_desc, &ring, dict) != 0) - return NULL; - - if (send_command(ETHTOOL_SRINGPARAM, devname, &ring)) - return NULL; - - Py_INCREF(Py_None); - return Py_None; -} - -static struct PyMethodDef PyEthModuleMethods[] = { - { - .ml_name = "get_module", - .ml_meth = (PyCFunction)get_module, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_businfo", - .ml_meth = (PyCFunction)get_businfo, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_hwaddr", - .ml_meth = (PyCFunction)get_hwaddress, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_ipaddr", - .ml_meth = (PyCFunction)get_ipaddress, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_interfaces_info", - .ml_meth = (PyCFunction)get_interfaces_info, - .ml_flags = METH_VARARGS, - .ml_doc = "Accepts a string, list or tupples of interface names. " - "Returns a list of ethtool.etherinfo objets with device information." - }, - { - .ml_name = "get_netmask", - .ml_meth = (PyCFunction)get_netmask, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_broadcast", - .ml_meth = (PyCFunction)get_broadcast, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_coalesce", - .ml_meth = (PyCFunction)get_coalesce, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "set_coalesce", - .ml_meth = (PyCFunction)set_coalesce, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_devices", - .ml_meth = (PyCFunction)get_devices, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_active_devices", - .ml_meth = (PyCFunction)get_active_devices, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_ringparam", - .ml_meth = (PyCFunction)get_ringparam, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "set_ringparam", - .ml_meth = (PyCFunction)set_ringparam, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_tso", - .ml_meth = (PyCFunction)get_tso, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "set_tso", - .ml_meth = (PyCFunction)set_tso, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_ufo", - .ml_meth = (PyCFunction)get_ufo, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_gso", - .ml_meth = (PyCFunction)get_gso, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_sg", - .ml_meth = (PyCFunction)get_sg, - .ml_flags = METH_VARARGS, - }, - { - .ml_name = "get_flags", - .ml_meth = (PyCFunction)get_flags, - .ml_flags = METH_VARARGS, - }, - { .ml_name = NULL, }, -}; - - -/** - * Connects to the NETLINK interface. This should only be - * called once as part of the main ethtool module init. - * - * @param nlc Structure which keeps the NETLINK connection handle (struct nl_handle) - * - * @return Returns 1 on success, otherwise 0. - */ -int open_netlink(struct nl_handle **nlc) -{ - if( *nlc ) { - return 0; - } - - *nlc = nl_handle_alloc(); - nl_connect(*nlc, NETLINK_ROUTE); - return (*nlc != NULL); -} - - -/** - * Closes the NETLINK connection. This should be called automatically whenever - * the ethtool module is unloaded from Python. - * - * @param ptr Pointer to the pointer of struct nl_handle, which contains the NETLINK connection - */ -void close_netlink(void **ptr) -{ - struct nl_handle *nlc; - - if( !ptr && !*ptr ) { - return; - } - - nlc = (struct nl_handle *) *ptr; - if( !nlc ) { - return; - } - - /* Close NETLINK connection */ - nl_close(nlc); - nl_handle_destroy(nlc); - *ptr = NULL; /* reset the pointers pointer address */ -} - - -PyMODINIT_FUNC initethtool(void) -{ - PyObject *m; - m = Py_InitModule3("ethtool", PyEthModuleMethods, "Python ethtool module"); - - // Prepare the ethtool.etherinfo class - if (PyType_Ready(&ethtool_etherinfoType) < 0) - return; - Py_INCREF(&ethtool_etherinfoType); - PyModule_AddObject(m, "etherinfo", (PyObject *)&ethtool_etherinfoType); - - // Prepare the ethtool.etherinfo_ipv6addr class - if (PyType_Ready(&ethtool_etherinfoIPv6Type) < 0) - return; - Py_INCREF(&ethtool_etherinfoIPv6Type); - PyModule_AddObject(m, "etherinfo_ipv6addr", (PyObject *)&ethtool_etherinfoIPv6Type); - - // Prepare an internal netlink connection object - if( open_netlink(&nlconnection) ) { - PyModule_AddObject(m, "__nlconnection", - PyCObject_FromVoidPtr(&nlconnection, close_netlink)); - } - - // Setup constants - PyModule_AddIntConstant(m, "IFF_UP", IFF_UP); /* Interface is up. */ - PyModule_AddIntConstant(m, "IFF_BROADCAST", IFF_BROADCAST); /* Broadcast address valid. */ - PyModule_AddIntConstant(m, "IFF_DEBUG", IFF_DEBUG); /* Turn on debugging. */ - PyModule_AddIntConstant(m, "IFF_LOOPBACK", IFF_LOOPBACK); /* Is a loopback net */ - PyModule_AddIntConstant(m, "IFF_POINTOPOINT", IFF_POINTOPOINT); /* Is a point-to-point link */ - PyModule_AddIntConstant(m, "IFF_NOTRAILERS", IFF_NOTRAILERS); /* Avoid use of trailers */ - PyModule_AddIntConstant(m, "IFF_RUNNING", IFF_RUNNING); /* Resources allocated */ - PyModule_AddIntConstant(m, "IFF_NOARP", IFF_NOARP); /* No address resolution protocol. */ - PyModule_AddIntConstant(m, "IFF_PROMISC", IFF_PROMISC); /* Receive all packets. */ - PyModule_AddIntConstant(m, "IFF_ALLMULTI", IFF_ALLMULTI); /* Receive all multicast packets. */ - PyModule_AddIntConstant(m, "IFF_MASTER", IFF_MASTER); /* Master of a load balancer. */ - PyModule_AddIntConstant(m, "IFF_SLAVE", IFF_SLAVE); /* Slave of a load balancer. */ - PyModule_AddIntConstant(m, "IFF_MULTICAST", IFF_MULTICAST); /* Supports multicast. */ - PyModule_AddIntConstant(m, "IFF_PORTSEL", IFF_PORTSEL); /* Can set media type. */ - PyModule_AddIntConstant(m, "IFF_AUTOMEDIA", IFF_AUTOMEDIA); /* Auto media select active. */ - PyModule_AddIntConstant(m, "IFF_DYNAMIC", IFF_DYNAMIC); /* Dialup device with changing addresses. */ - PyModule_AddIntConstant(m, "AF_INET", AF_INET); /* IPv4 interface */ - PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); /* IPv6 interface */ -} - diff --git a/spec-tree/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec b/spec-tree/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec deleted file mode 100644 index 76a4dfe..0000000 --- a/spec-tree/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec +++ /dev/null @@ -1,76 +0,0 @@ -%{!?python_sitearch: %define python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")} -%{!?python_ver: %define python_ver %(%{__python} -c "import sys ; print sys.version[:3]")} - -Summary: Ethernet settings python bindings -Name: python-ethtool -Version: 0.5 -Release: 1%{?dist} -URL: http://fedorapeople.org/gitweb?p=dsommers/public_git/python-ethtool.git;a=s… -Source: http://dsommers.fedorapeople.org/python-ethtool/%{name}-%{version}.tar.bz2 -License: GPLv2 -Group: System Environment/Libraries -BuildRequires: python-devel libnl-devel -BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) - -%description -Python bindings for the ethtool kernel interface, that allows querying and -changing of Ethernet card settings, such as speed, port, auto-negotiation, and -PCI locations. - -%prep -%setup -q - -%build -%{__python} setup.py build - -%install -rm -rf %{buildroot} -%{__python} setup.py install --skip-build --root %{buildroot} -mkdir -p %{buildroot}%{_sbindir} -cp -p pethtool.py %{buildroot}%{_sbindir}/pethtool -cp -p pifconfig.py %{buildroot}%{_sbindir}/pifconfig - -%clean -rm -rf %{buildroot} - -%files -%defattr(-,root,root) -%doc COPYING -%{_sbindir}/pethtool -%{_sbindir}/pifconfig -%{python_sitearch}/ethtool.so -%if "%{python_ver}" >= "2.5" -%{python_sitearch}/*.egg-info -%endif - -%changelog -* Mon Aug 9 2010 David Sommerseth <davids(a)redhat.com> - 0.5-1 -- Fixed double free issue (commit c52ed2cbdc5b851ebc7b) - -* Wed Apr 28 2010 David Sommerseth <davids(a)redhat.com> - 0.4-1 -- David Sommerseth is now taking over the maintenance of python-ethtool -- New URLs for upstream source code -- Added new API: ethtool.get_interfaces_info() - returns list of etherinfo objects -- Added support retrieving for IPv6 address, using etherinfo::get_ipv6_addresses() - -* Fri Sep 5 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.3-2 -- Rewrote build and install sections as part of the fedora review process - BZ #459549 - -* Tue Aug 26 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.3-1 -- Add get_flags method from the first python-ethtool contributor, yay -- Add pifconfig command, that mimics the ifconfig tool using the - bindings available - -* Wed Aug 20 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.2-1 -- Expand description and summary fields, as part of the fedora - review process. - -* Tue Jun 10 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-3 -- add dist to the release tag - -* Tue Dec 18 2007 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-2 -- First build into MRG repo - -* Tue Dec 18 2007 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-1 -- Get ethtool code from rhpl 0.212 diff --git a/spec-tree/python-ethtool-0.5/setup.py b/spec-tree/python-ethtool-0.5/setup.py deleted file mode 100644 index 71b8c70..0000000 --- a/spec-tree/python-ethtool-0.5/setup.py +++ /dev/null @@ -1,69 +0,0 @@ -#!/usr/bin/python2 - -from distutils.core import setup, Extension -import commands - -ethtool = Extension('ethtool', - sources = ['python-ethtool/ethtool.c', - 'python-ethtool/etherinfo.c', 'python-ethtool/etherinfo_obj.c']) - -def pkgconfig(pkg): - def _str2list(pkgstr, onlystr): - res = [] - for l in pkgstr.split(" "): - if l.find(onlystr) == 0: - res.append(l.replace(onlystr, "", 1)) - return res - - (res, cflags) = commands.getstatusoutput('pkg-config --cflags-only-other %s' % pkg) - if res != 0: - print 'Failed to query pkg-config --cflags-only-other %s' % pkg - sys.exit(1) - - (res, includes) = commands.getstatusoutput('pkg-config --cflags-only-I %s' % pkg) - if res != 0: - print 'Failed to query pkg-config --cflags-only-I %s' % pkg - sys.exit(1) - - (res, libs) = commands.getstatusoutput('pkg-config --libs-only-l %s' % pkg) - if res != 0: - print 'Failed to query pkg-config --libs-only-l %s' % pkg - sys.exit(1) - - (res, libdirs) = commands.getstatusoutput('pkg-config --libs-only-L %s' % pkg) - if res != 0: - print 'Failed to query pkg-config --libs-only-L %s' % pkg - sys.exit(1) - - - # Clean up the results and return what we've extracted from pkg-config - return {'cflags': cflags, - 'include': _str2list(includes, '-I'), - 'libs': _str2list(libs, '-l'), - 'libdirs': _str2list(libdirs, '-L') - } - - -libnl = pkgconfig('libnl-1') - -# don't reformat this line, Makefile parses it -setup(name='ethtool', - version='0.2', - description='Python module to interface with ethtool', - author='Harald Hoyer & Arnaldo Carvalho de Melo', - author_email='acme(a)redhat.com', - url='http://fedoraproject.org/wiki/python-ethtool', - ext_modules=[ - Extension( - 'ethtool', - sources = [ - 'python-ethtool/ethtool.c', - 'python-ethtool/etherinfo.c', - 'python-ethtool/etherinfo_obj.c', - 'python-ethtool/etherinfo_ipv6_obj.c'], - include_dirs = libnl['include'], - library_dirs = libnl['libdirs'], - libraries = libnl['libs'] - ) - ] -) commit 9b72a1ce69fa742bd6d6d12f91c78ddc56663b28 Merge: 76a0dac... d5997ea... Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 16:47:55 2011 +0100 Merge branch 'master' into debian commit 76a0dacab54ae369be6b471cf08990451b60af43 Author: Simon Lukasik <slukasik(a)redhat.com> Date: Thu Feb 10 21:42:26 2011 +0100 Catch exceptions and report to apt in human-readable form diff --git a/client/apt-spacewalk/spacewalk.py b/client/apt-spacewalk/spacewalk.py index 5238251..d1faedf 100755 --- a/client/apt-spacewalk/spacewalk.py +++ b/client/apt-spacewalk/spacewalk.py @@ -89,8 +89,12 @@ class pkg_acquire_method: if msg == None: return 0 if msg['_number'] == 600: - # TODO: catch exceptions - self.fetch(msg) + try: + self.fetch(msg) + except Exception, e: + self.fail(e.__class__.__name__ + ": " + str(e)) + except up2dateErrors.Error, e: + self.fail(e.__class__.__name__ + ": " + str(e)) else: return 100 @@ -118,11 +122,11 @@ class spacewalk_method(pkg_acquire_method): http_headers = None base_channel = None conn = None + not_registered_msg = 'This system is not registered with the spacewalk server' - def fail(self, message = 'This system is not registered with the spacewalk server'): + def fail(self, message = not_registered_msg): self.uri_failure({'URI': self.uri, 'Message': message}) - return False def __load_config(self): @@ -135,22 +139,18 @@ class spacewalk_method(pkg_acquire_method): def __login(self): if self.login_info == None: self.status(URI = self.uri, Message = 'Logging into the spacewalk server') - self.login_info = up2dateAuth.getLoginInfo() # TODO: catch exceptions + self.login_info = up2dateAuth.getLoginInfo() if not self.login_info: - return self.fail() + raise up2date_client.AuthenticationError(self.not_registered_msg) self.status(URI = self.uri, Message = 'Logged in') - return True def __init_channels(self): if self.svr_channels == None: - self.svr_channels = rhnChannel.getChannelDetails() # TODO: catch exceptions - # TODO CHANNELS - # sslcacert = get_ssl_ca_cert(self.up2date_cfg) # TODO: to remove or not to remove + self.svr_channels = rhnChannel.getChannelDetails() for channel in self.svr_channels: if channel['parent_channel'] == '': self.base_channel = channel['label'] - # TODO: Full RhnRepo def __init_headers(self): @@ -163,10 +163,10 @@ class spacewalk_method(pkg_acquire_method): self.http_headers = {}; for header in rhn_needed_headers: if not self.login_info.has_key(header): - return self.fail("Missing required login information %s" % (header)) + raise up2date_client.AuthenticationError( + "Missing required login information %s" % (header)) self.http_headers[header] = self.login_info[header] self.http_headers['X-RHN-Transport-Capability'] = 'follow-redirects=3' - return True def __make_conn(self): @@ -202,17 +202,12 @@ class spacewalk_method(pkg_acquire_method): self.__load_config() if self.uri_parsed.netloc != self.up2date_server.netloc: return self.fail() - - if not self.__login(): - return - + self.__login() self.__init_channels() document = self.__transform_document(self.uri_parsed.path) - if not self.__init_headers(): - return - + self.__init_headers() self.__make_conn() self.conn.request("GET", "/" + document, headers = self.http_headers) commit a54f976b7f6e3f4792cb35c525f772492eed5be0 Author: Simon Lukasik <slukasik(a)redhat.com> Date: Thu Feb 10 20:20:11 2011 +0100 Support for https has been added (as default) diff --git a/client/apt-spacewalk/spacewalk.py b/client/apt-spacewalk/spacewalk.py old mode 100644 new mode 100755 index e3f3e7b..5238251 --- a/client/apt-spacewalk/spacewalk.py +++ b/client/apt-spacewalk/spacewalk.py @@ -17,7 +17,7 @@ warnings.filterwarnings("ignore", message="the md5 module is deprecated; use has sys.path.append("/usr/share/rhn/") from urlparse import urlparse -from httplib import HTTPConnection, HTTPSConnection +from rhn.connections import HTTPConnection, HTTPSConnection from up2date_client import config from up2date_client import rhnChannel from up2date_client import up2dateAuth @@ -96,7 +96,6 @@ class pkg_acquire_method: - def get_ssl_ca_cert(up2date_cfg): if not (up2date_cfg.has_key('sslCACert') and up2date_cfg['sslCACert']): raise BadSslCaCertConfig @@ -104,6 +103,7 @@ def get_ssl_ca_cert(up2date_cfg): ca_certs = up2date_cfg['sslCACert'] if type(ca_certs) == list: return ca_certs + return [ca_certs] @@ -170,9 +170,13 @@ class spacewalk_method(pkg_acquire_method): def __make_conn(self): - # TODO: HTTPS + certificate verification if self.conn == None: - self.conn = HTTPConnection(self.up2date_server.netloc) + if self.up2date_server.scheme == 'http' \ + or self.up2date_cfg['useNoSSLForPackages'] == 1: + self.conn = HTTPConnection(self.up2date_server.netloc) + else: + self.conn = HTTPSConnection(self.up2date_server.netloc, + trusted_certs=get_ssl_ca_cert(self.up2date_cfg)) def __transform_document(self, document): @@ -222,6 +226,7 @@ class spacewalk_method(pkg_acquire_method): while True: data = res.read(4096) if not len(data): break + res.close() return self.uri_start({'URI': self.uri, @@ -238,6 +243,7 @@ class spacewalk_method(pkg_acquire_method): hash_sha256.update(data) hash_md5.update(data) f.write(data) + res.close() f.close() self.uri_done({'URI': self.uri, commit 7f85e86370ecd535f0f835892cacad07e6374a96 Author: Simon Lukasik <slukasik(a)redhat.com> Date: Thu Feb 10 17:27:24 2011 +0100 Use urlparse lib instead of hardcoded str.split diff --git a/client/apt-spacewalk/spacewalk.py b/client/apt-spacewalk/spacewalk.py index f1a38e9..e3f3e7b 100644 --- a/client/apt-spacewalk/spacewalk.py +++ b/client/apt-spacewalk/spacewalk.py @@ -16,6 +16,7 @@ import warnings warnings.filterwarnings("ignore", message="the md5 module is deprecated; use hashlib instead") sys.path.append("/usr/share/rhn/") +from urlparse import urlparse from httplib import HTTPConnection, HTTPSConnection from up2date_client import config from up2date_client import rhnChannel @@ -111,7 +112,6 @@ class spacewalk_method(pkg_acquire_method): Spacewalk acquire method """ up2date_cfg = None - server_fqdn = None login_info = None current_url = None svr_channels = None @@ -128,7 +128,7 @@ class spacewalk_method(pkg_acquire_method): def __load_config(self): if self.up2date_cfg == None: self.up2date_cfg = config.initUp2dateConfig() - self.server_fqdn = self.up2date_cfg['serverURL'].split("/",3)[2] + self.up2date_server = urlparse(self.up2date_cfg['serverURL']) # TODO: proxy settings @@ -172,7 +172,7 @@ class spacewalk_method(pkg_acquire_method): def __make_conn(self): # TODO: HTTPS + certificate verification if self.conn == None: - self.conn = HTTPConnection(self.server_fqdn) + self.conn = HTTPConnection(self.up2date_server.netloc) def __transform_document(self, document): @@ -192,11 +192,11 @@ class spacewalk_method(pkg_acquire_method): Other possible keys are: 'Last-Modified', 'Index-File', 'Fail-Ignore' """ self.uri = msg['URI'] + self.uri_parsed = urlparse(msg['URI']) self.filename = msg['Filename'] self.__load_config() - server_fqdn, document = self.uri.split("/",3)[2:] - if server_fqdn != self.server_fqdn: + if self.uri_parsed.netloc != self.up2date_server.netloc: return self.fail() if not self.__login(): @@ -204,7 +204,7 @@ class spacewalk_method(pkg_acquire_method): self.__init_channels() - document = self.__transform_document(document) + document = self.__transform_document(self.uri_parsed.path) if not self.__init_headers(): return commit 940025d9ff141db8fc84033f79cbeeaa5e8980bb Author: Simon Lukasik <slukasik(a)redhat.com> Date: Fri Feb 4 20:38:32 2011 +0100 Remove stupid dependency on machine architecture diff --git a/client/apt-spacewalk/spacewalk.py b/client/apt-spacewalk/spacewalk.py index 989fed3..f1a38e9 100644 --- a/client/apt-spacewalk/spacewalk.py +++ b/client/apt-spacewalk/spacewalk.py @@ -9,6 +9,7 @@ # import sys +import re import hashlib import warnings @@ -144,7 +145,6 @@ class spacewalk_method(pkg_acquire_method): def __init_channels(self): if self.svr_channels == None: self.svr_channels = rhnChannel.getChannelDetails() # TODO: catch exceptions - # TODO: some conduit magic here (or rather not) # TODO CHANNELS # sslcacert = get_ssl_ca_cert(self.up2date_cfg) # TODO: to remove or not to remove for channel in self.svr_channels: @@ -179,7 +179,7 @@ class spacewalk_method(pkg_acquire_method): """Transform url given by apt to real spacewalk url""" document = document.replace('dists/channels:/main/', 'dists/channels:/' + self.base_channel + '/', 1) - document = document.replace('binary-i386', 'repodata', 1) # TODO + document = re.sub('/binary-[\d\w]*/', '/repodata/', document, 1) document = document.replace('dists/channels:/', '/XMLRPC/GET-REQ/', 1) return document commit 4239f043da4e457a8ade4f7771d0c17dea8e9cd4 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Sat Jan 29 19:58:06 2011 +0100 howto build apt-spacewalk debian package diff --git a/DEBIAN-HOWTO b/DEBIAN-HOWTO index 4b001d5..ed04f6a 100644 --- a/DEBIAN-HOWTO +++ b/DEBIAN-HOWTO @@ -3,10 +3,11 @@ HOW TO BUILD DEBIAN PACKAGES python-rhnlib in client/rhel/rhnlib ----------------------------------- git checkout master -cd rhnlib +cd client/rhel/rhnlib tito build --tgz copy rhnlib-2.5.27.tar.gz /tmp/python-rhnlib_2.5.27.orig.tar.gz git checkout debian +cd .. cp -a rhnlib /tmp/python-rhnlib-2.5.27 cd /tmp/python-rhnlib-2.5.27 debuild -i -S @@ -18,3 +19,17 @@ Similary for other packages. All packages available: python-rhnlib in client/rhel/rhnlib python-ethtool-0.5 in spec-tree/python-ethtool-0.5 +apt-spacewalk + + +apt-spacewalk is not in master, so the instructions is little differen: +cd client/apt-spacewalk +tar zcvf /tmp/apt-spacewalk_1.0.0.orig.tar.gz spacewalk.py +cd .. +cp -a apt-spacewalk /tmp/apt-spacewalk-1.0.0 +cd /tmp/apt-spacewalk-1.0.0 +#build source package +debuild -i -S +#or build binary package +debuild -b + commit 5bb8d7698b7e7dbc61eb5243303b2a84c3a48b7f Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Sat Jan 29 19:53:52 2011 +0100 add apt-spacewalk package diff --git a/client/apt-spacewalk/debian/apt-spacewalk.install b/client/apt-spacewalk/debian/apt-spacewalk.install new file mode 100644 index 0000000..6819a30 --- /dev/null +++ b/client/apt-spacewalk/debian/apt-spacewalk.install @@ -0,0 +1 @@ +spacewalk.py /usr/lib/apt/methods/ diff --git a/client/apt-spacewalk/debian/changelog b/client/apt-spacewalk/debian/changelog new file mode 100644 index 0000000..8235644 --- /dev/null +++ b/client/apt-spacewalk/debian/changelog @@ -0,0 +1,6 @@ +apt-spacewalk (1.0.0-1) unstable; urgency=low + + * Initial release Package was created. + + -- Miroslav Suchý <miroslav(a)suchy.cz> Mon, 20 Sep 2010 10:38:44 +0200 + diff --git a/client/apt-spacewalk/debian/compat b/client/apt-spacewalk/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/client/apt-spacewalk/debian/compat @@ -0,0 +1 @@ +7 diff --git a/client/apt-spacewalk/debian/control b/client/apt-spacewalk/debian/control new file mode 100644 index 0000000..96b6a22 --- /dev/null +++ b/client/apt-spacewalk/debian/control @@ -0,0 +1,15 @@ +Source: apt-spacewalk +Section: python +Priority: extra +Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> +Build-Depends: python, debhelper (>= 7.0.50~) +Build-Depends-Indep: python-support (>= 0.8) +Standards-Version: 3.9.1 +Homepage: https://fedorahosted.org/spacewalk + +Package: apt-spacewalk +Architecture: all +Depends: ${python:Depends}, ${misc:Depends}, rhn-client-tools +Provides: ${python:Provides} +Description: Spacewalk transport for apt-get. + This is used to connect to Spacewalk servers. diff --git a/client/apt-spacewalk/debian/copyright b/client/apt-spacewalk/debian/copyright new file mode 100644 index 0000000..98b52fb --- /dev/null +++ b/client/apt-spacewalk/debian/copyright @@ -0,0 +1,21 @@ +apt-spacewalk is copyright 2011 by Red Hat Inc. +apt-spacewalk is currently developed by Spacewalk Development Team <spacewalk-devel(a)redhat.com>. + +License: GPLv2 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + +See /usr/share/common-licenses/GPL-2, or +<http://www.gnu.org/copyleft/gpl.txt> for the terms of the latest version +of the GNU General Public License. diff --git a/client/apt-spacewalk/debian/docs b/client/apt-spacewalk/debian/docs new file mode 100644 index 0000000..a48c3b0 --- /dev/null +++ b/client/apt-spacewalk/debian/docs @@ -0,0 +1,2 @@ +ChangeLog +copyright diff --git a/client/apt-spacewalk/debian/pycompat b/client/apt-spacewalk/debian/pycompat new file mode 100644 index 0000000..0cfbf08 --- /dev/null +++ b/client/apt-spacewalk/debian/pycompat @@ -0,0 +1 @@ +2 diff --git a/client/apt-spacewalk/debian/rules b/client/apt-spacewalk/debian/rules new file mode 100755 index 0000000..e652103 --- /dev/null +++ b/client/apt-spacewalk/debian/rules @@ -0,0 +1,46 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +install: build + dh_testdir + dh_testroot + dh_prep + dh_installdirs -A $(CURDIR)/usr/lib/apt/methods/ + dh_install + +build: build-stamp + +build-stamp: + dh_testdir + touch build-stamp + +clean: + rm -rf build + +binary: binary-indep binary-arch + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installdebconf + dh_installdeb + dh_python + dh_gencontrol + dh_md5sums + dh_builddeb + +.PHONY: build clean binary-indep binary-arch binary install + diff --git a/client/apt-spacewalk/debian/source/format b/client/apt-spacewalk/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/client/apt-spacewalk/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/client/apt-spacewalk/debian/watch b/client/apt-spacewalk/debian/watch new file mode 100644 index 0000000..c76ceee --- /dev/null +++ b/client/apt-spacewalk/debian/watch @@ -0,0 +1,2 @@ +version=3 +https://fedorahosted.org/releases/s/p/spacewalk/rhnlib-(.*)\.tar\.gz diff --git a/client/apt-spacewalk/spacewalk.py b/client/apt-spacewalk/spacewalk.py new file mode 100644 index 0000000..989fed3 --- /dev/null +++ b/client/apt-spacewalk/spacewalk.py @@ -0,0 +1,262 @@ +#!/usr/bin/python -u +# +# Very early prototype of apt-transport-spacewalk +# +# Author: Simon Lukasik <xlukas08 [at] stud.fit.vutbr.cz> +# Date: 2011-01-01 +# License: GPLv2 +# +# + +import sys +import hashlib + +import warnings +warnings.filterwarnings("ignore", message="the md5 module is deprecated; use hashlib instead") +sys.path.append("/usr/share/rhn/") + +from httplib import HTTPConnection, HTTPSConnection +from up2date_client import config +from up2date_client import rhnChannel +from up2date_client import up2dateAuth +from up2date_client import up2dateErrors + + + +class pkg_acquire_method: + """ + This is slightly modified python variant of apt-pkg/acquire-method. + It is a skeleton class that implements only very basic of apt methods + functionality. + """ + __eof = False + + def __init__(self): + print "100 Capabilities\nVersion: 1.0\nSingle-Instance: true\n\n", + + def __get_next_msg(self): + """ + Apt uses for communication with its methods the text protocol similar + to http. This function parses the protocol messages from stdin. + """ + if self.__eof: + return None + result = {}; + line = sys.stdin.readline() + if not line: + self.__eof = True + return None + s = line.split(" ", 1) + result['_number'] = int(s[0]) + result['_text'] = s[1].strip() + + while not self.__eof: + line = sys.stdin.readline() + if not line: + self.__eof = True + return result + if line == '\n': + return result + s = line.split(":", 1) + result[s[0]] = s[1].strip() + + def __dict2msg(self, msg): + """Convert dictionary to http like message""" + result = "" + for item in msg.keys(): + if msg[item] != None: + result += item + ": " + msg[item] + "\n" + return result + + def status(self, **kwargs): + print "102 Status\n%s\n" % self.__dict2msg(kwargs), + + def uri_start(self, msg): + print "200 URI Start\n%s\n" % self.__dict2msg(msg), + + def uri_done(self, msg): + print "201 URI Done\n%s\n" % self.__dict2msg(msg), + + def uri_failure(self, msg): + print "400 URI Failure\n%s\n" % self.__dict2msg(msg), + + def run(self): + """Loop through requests on stdin""" + while True: + msg = self.__get_next_msg() + if msg == None: + return 0 + if msg['_number'] == 600: + # TODO: catch exceptions + self.fetch(msg) + else: + return 100 + + + + +def get_ssl_ca_cert(up2date_cfg): + if not (up2date_cfg.has_key('sslCACert') and up2date_cfg['sslCACert']): + raise BadSslCaCertConfig + + ca_certs = up2date_cfg['sslCACert'] + if type(ca_certs) == list: + return ca_certs + + + +class spacewalk_method(pkg_acquire_method): + """ + Spacewalk acquire method + """ + up2date_cfg = None + server_fqdn = None + login_info = None + current_url = None + svr_channels = None + http_headers = None + base_channel = None + conn = None + + def fail(self, message = 'This system is not registered with the spacewalk server'): + self.uri_failure({'URI': self.uri, + 'Message': message}) + return False + + + def __load_config(self): + if self.up2date_cfg == None: + self.up2date_cfg = config.initUp2dateConfig() + self.server_fqdn = self.up2date_cfg['serverURL'].split("/",3)[2] + # TODO: proxy settings + + + def __login(self): + if self.login_info == None: + self.status(URI = self.uri, Message = 'Logging into the spacewalk server') + self.login_info = up2dateAuth.getLoginInfo() # TODO: catch exceptions + if not self.login_info: + return self.fail() + self.status(URI = self.uri, Message = 'Logged in') + return True + + + def __init_channels(self): + if self.svr_channels == None: + self.svr_channels = rhnChannel.getChannelDetails() # TODO: catch exceptions + # TODO: some conduit magic here (or rather not) + # TODO CHANNELS + # sslcacert = get_ssl_ca_cert(self.up2date_cfg) # TODO: to remove or not to remove + for channel in self.svr_channels: + if channel['parent_channel'] == '': + self.base_channel = channel['label'] + # TODO: Full RhnRepo + + + def __init_headers(self): + if self.http_headers == None: + rhn_needed_headers = ['X-RHN-Server-Id', + 'X-RHN-Auth-User-Id', + 'X-RHN-Auth', + 'X-RHN-Auth-Server-Time', + 'X-RHN-Auth-Expire-Offset'] + self.http_headers = {}; + for header in rhn_needed_headers: + if not self.login_info.has_key(header): + return self.fail("Missing required login information %s" % (header)) + self.http_headers[header] = self.login_info[header] + self.http_headers['X-RHN-Transport-Capability'] = 'follow-redirects=3' + return True + + + def __make_conn(self): + # TODO: HTTPS + certificate verification + if self.conn == None: + self.conn = HTTPConnection(self.server_fqdn) + + + def __transform_document(self, document): + """Transform url given by apt to real spacewalk url""" + document = document.replace('dists/channels:/main/', + 'dists/channels:/' + self.base_channel + '/', 1) + document = document.replace('binary-i386', 'repodata', 1) # TODO + document = document.replace('dists/channels:/', '/XMLRPC/GET-REQ/', 1) + return document + + + def fetch(self, msg): + """ + Fetch the content from spacewalk server to the file. + + Acording to the apt protocol msg must contain: 'URI' and 'Filename'. + Other possible keys are: 'Last-Modified', 'Index-File', 'Fail-Ignore' + """ + self.uri = msg['URI'] + self.filename = msg['Filename'] + + self.__load_config() + server_fqdn, document = self.uri.split("/",3)[2:] + if server_fqdn != self.server_fqdn: + return self.fail() + + if not self.__login(): + return + + self.__init_channels() + + document = self.__transform_document(document) + + if not self.__init_headers(): + return + + self.__make_conn() + + self.conn.request("GET", "/" + document, headers = self.http_headers) + self.status(URI = self.uri, Message = 'Waiting for headers') + + res = self.conn.getresponse() + if res.status != 200: + self.uri_failure({'URI': self.uri, + 'Message': str(res.status) + ' ' + res.reason, + 'FailReason': 'HttpError' + str(res.status)}) + while True: + data = res.read(4096) + if not len(data): break + return + + self.uri_start({'URI': self.uri, + 'Size': res.getheader('content-length'), + 'Last-Modified': res.getheader('last-modified')}) + + f = open(self.filename, "w") + hash_sha256 = hashlib.sha256() + hash_md5 = hashlib.md5() + while True: + data = res.read(4096) + if not len(data): + break + hash_sha256.update(data) + hash_md5.update(data) + f.write(data) + f.close() + + self.uri_done({'URI': self.uri, + 'Filename': self.filename, + 'Size': res.getheader('content-length'), + 'Last-Modified': res.getheader('last-modified'), + 'MD5-Hash': hash_md5.hexdigest(), + 'MD5Sum-Hash': hash_md5.hexdigest(), + 'SHA256-Hash': hash_sha256.hexdigest()}) + + + def __del__(self): + if self.conn: + self.conn.close() + + + +if __name__ == '__main__': + method = spacewalk_method() + ret = method.run() + sys.exit(ret) + commit e32d9f14749fa3b406bb9d7ef89e77c70c763402 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Mon Oct 18 22:12:52 2010 +0200 add python-ethtool-0.5 package diff --git a/DEBIAN-HOWTO b/DEBIAN-HOWTO index 0a94e7d..4b001d5 100644 --- a/DEBIAN-HOWTO +++ b/DEBIAN-HOWTO @@ -15,3 +15,6 @@ dupload -t mentors python-rhnlib_2.5.27-1_source.changes Similary for other packages. +All packages available: +python-rhnlib in client/rhel/rhnlib +python-ethtool-0.5 in spec-tree/python-ethtool-0.5 diff --git a/spec-tree/python-ethtool-0.5/.pc/.quilt_patches b/spec-tree/python-ethtool-0.5/.pc/.quilt_patches new file mode 100644 index 0000000..6857a8d --- /dev/null +++ b/spec-tree/python-ethtool-0.5/.pc/.quilt_patches @@ -0,0 +1 @@ +debian/patches diff --git a/spec-tree/python-ethtool-0.5/.pc/.quilt_series b/spec-tree/python-ethtool-0.5/.pc/.quilt_series new file mode 100644 index 0000000..c206706 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/.pc/.quilt_series @@ -0,0 +1 @@ +series diff --git a/spec-tree/python-ethtool-0.5/.pc/.version b/spec-tree/python-ethtool-0.5/.pc/.version new file mode 100644 index 0000000..0cfbf08 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/.pc/.version @@ -0,0 +1 @@ +2 diff --git a/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pethtool.8.asciidoc b/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pethtool.8.asciidoc new file mode 100644 index 0000000..e69de29 diff --git a/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pifconfig.8.asciidoc b/spec-tree/python-ethtool-0.5/.pc/debian-changes-0.5-1/man/pifconfig.8.asciidoc new file mode 100644 index 0000000..e69de29 diff --git a/spec-tree/python-ethtool-0.5/COPYING b/spec-tree/python-ethtool-0.5/COPYING new file mode 100644 index 0000000..a43ea21 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/COPYING @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 675 Mass Ave, Cambridge, MA 02139, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/spec-tree/python-ethtool-0.5/MANIFEST b/spec-tree/python-ethtool-0.5/MANIFEST new file mode 100644 index 0000000..fe5d601 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/MANIFEST @@ -0,0 +1,16 @@ +COPYING +pethtool.py +pifconfig.py +python-ethtool/ethtool.c +python-ethtool/ethtool-copy.h +python-ethtool/etherinfo.c +python-ethtool/etherinfo_obj.c +python-ethtool/etherinfo_ipv6_obj.c +python-ethtool/etherinfo_struct.h +python-ethtool/etherinfo.h +python-ethtool/etherinfo_obj.h +python-ethtool/etherinfo_ipv6_obj.h +setup.py +rpm/SPECS/python-ethtool.spec +MANIFEST +Makefile diff --git a/spec-tree/python-ethtool-0.5/Makefile b/spec-tree/python-ethtool-0.5/Makefile new file mode 100644 index 0000000..ce181ee --- /dev/null +++ b/spec-tree/python-ethtool-0.5/Makefile @@ -0,0 +1,26 @@ +PACKAGE := python-ethtool +VERSION := $(shell rpm -q --qf '%{VERSION} ' --specfile rpm/SPECS/$(PACKAGE).spec | cut -d' ' -f1) + +rpmdirs: + @[ -d rpm/BUILD ] || mkdir rpm/BUILD + @[ -d rpm/RPMS ] || mkdir rpm/RPMS + @[ -d rpm/SRPMS ] || mkdir rpm/SRPMS + @[ -d rpm/SOURCES ] || mkdir rpm/SOURCES + +bz2: rpmdirs + git archive --format=tar --prefix=$(PACKAGE)-$(VERSION)/ HEAD | \ + bzip2 -9 > rpm/SOURCES/$(PACKAGE)-$(VERSION).tar.bz2 + +install: + python setup.py install --root=$(DESTDIR) + +rpm: bz2 rpmdirs + rpmbuild -ba --define "_topdir $(PWD)/rpm" rpm/SPECS/$(PACKAGE).spec + +bz2dev: rpmdirs + @mkdir -p /tmp/$(PACKAGE)-$(VERSION) + @tar cf - `cat MANIFEST` | (cd /tmp/$(PACKAGE)-$(VERSION) ; tar xf -) + @(cd /tmp; tar cf - $(PACKAGE)-$(VERSION)) | bzip2 -9 > rpm/SOURCES/$(PACKAGE)-$(VERSION).tar.bz2 + +rpmdev: bz2dev rpmdirs + rpmbuild -ba --define "_topdir $(PWD)/rpm" rpm/SPECS/$(PACKAGE).spec diff --git a/spec-tree/python-ethtool-0.5/debian/changelog b/spec-tree/python-ethtool-0.5/debian/changelog new file mode 100644 index 0000000..4516b6b --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/changelog @@ -0,0 +1,12 @@ +python-ethtool (0.5-1) unstable; urgency=low + + * Packaging for Debian main (Closes: #549323). + + -- Miroslav Suchý <miroslav(a)suchy.cz> Wed, 29 Sep 2010 23:00:00 +0200 + +python-ethtool (0.3-2) unstable; urgency=low + + * Initial release + + -- Lukáš Ďurfina <lukas.durfina(a)gmail.com> Wed, 09 Sep 2009 18:49:50 +0200 + diff --git a/spec-tree/python-ethtool-0.5/debian/compat b/spec-tree/python-ethtool-0.5/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/compat @@ -0,0 +1 @@ +7 diff --git a/spec-tree/python-ethtool-0.5/debian/control b/spec-tree/python-ethtool-0.5/debian/control new file mode 100644 index 0000000..7318d89 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/control @@ -0,0 +1,15 @@ +Source: python-ethtool +Section: python +Priority: extra +Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> +Build-Depends: debhelper (>= 7.0.50~), python, python-all-dev, libnl-dev, python-support (>= 0.8), asciidoc +Standards-Version: 3.9.1 +Homepage: http://fedorapeople.org/gitweb?p=dsommers/public_git/python-ethtool.git;a=s… + +Package: python-ethtool +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends} +Description: Ethernet settings python bindings + Python bindings for the ethtool kernel interface, that allows querying and + changing of ethernet card settings, such as speed, port, autonegotiation, + and PCI locations. diff --git a/spec-tree/python-ethtool-0.5/debian/copyright b/spec-tree/python-ethtool-0.5/debian/copyright new file mode 100644 index 0000000..1696cbf --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/copyright @@ -0,0 +1,38 @@ +This package was debianized by Lukáš Ďurfina <lukas.durfina(a)gmail.com> on +Wed, 09 Sep 2009 18:49:50 +0200. + +It was downloaded from http://git.kernel.org/?p=linux/kernel/git/acme/python-ethtool.git + +Upstream Author(s): + + Arnaldo Carvalho de Melo <acme(a)redhat.com> + David Sommerseth <davids(a)redhat.com> + +Copyright: + + Arnaldo Carvalho de Melo <acme(a)redhat.com> + David Sommerseth <davids(a)redhat.com> + +License: + + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. + +File ethtool-copy.h is copy from gkernel and is licenced under GPLv2. + +The Debian packaging is Copyright 2009, Lukáš Ďurfina <lukas.durfina(a)gmail.com> and +is licensed under the GPL, see above. diff --git a/spec-tree/python-ethtool-0.5/debian/install b/spec-tree/python-ethtool-0.5/debian/install new file mode 100644 index 0000000..c45faa4 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/install @@ -0,0 +1,2 @@ +pethtool usr/sbin +pifconfig usr/sbin diff --git a/spec-tree/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 b/spec-tree/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 new file mode 100644 index 0000000..751399e --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/patches/debian-changes-0.5-1 @@ -0,0 +1,155 @@ +Description: Upstream changes introduced in version 0.5-1 + This patch has been created by dpkg-source during the package build. + Here's the last changelog entry, hopefully it gives details on why + those changes were made: + . + python-ethtool (0.5-1) unstable; urgency=low + . + * Packaging for Debian main (Closes: #549323). + . + The person named in the Author field signed this changelog entry. +Author: Miroslav Suchý <miroslav(a)suchy.cz> +Bug-Debian: http://bugs.debian.org/549323 + +--- +The information above should follow the Patch Tagging Guidelines, please +checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here +are templates for supplementary fields that you might want to add: + +Origin: <vendor|upstream|other>, <url of original patch> +Bug: <url in upstream bugtracker> +Bug-Debian: http://bugs.debian.org/<bugnumber> +Bug-Ubuntu: https://launchpad.net/bugs/<bugnumber> +Forwarded: <no|not-needed|url proving that it has been forwarded> +Reviewed-By: <name and email of someone who approved the patch> +Last-Update: <YYYY-MM-DD> + +--- /dev/null ++++ python-ethtool-0.5/man/pifconfig.8.asciidoc +@@ -0,0 +1,42 @@ ++pifconfig(8) ++============ ++ ++NAME ++---- ++pifconfig - display information about a network interface ++ ++ ++SYNOPSIS ++-------- ++pifconfig [INTERFACE] ++ ++ ++DESCRIPTION ++----------- ++ ++This script mimic ifconfig behavior, but is written purely in python ++and python module ethtool. ++ ++ ++OPTIONS ++------- ++ ++INTERFACE:: ++Display information about only this interface. If no interface is given ++then all interfaces are displayed. ++ ++-h, --help:: ++Show help message and exit. ++ ++ ++SEE ALSO ++-------- ++ifconfig(8) ++ ++ ++ ++AUTHORS ++------- ++Arnaldo Carvalho de Melo <acme(a)redhat.com> ++ ++Man page written by Miroslav Suchý <msuchy(a)redhat.com> +--- /dev/null ++++ python-ethtool-0.5/man/pethtool.8.asciidoc +@@ -0,0 +1,81 @@ ++pethtool(8) ++=========== ++ ++NAME ++---- ++pethtool - Display or change ethernet card settings ++ ++ ++SYNOPSIS ++-------- ++pethtool [OPTIONS] [<INTERFACE>] ++ ++ ++DESCRIPTION ++----------- ++ ++This script mimic ethtool behavior, but is written purely in python ++and python module ethtool. ++ ++ ++OPTIONS ++------- ++ ++INTERFACE:: ++Is the name of the ethernet device on which pethtool should operate. ++ ++-h, --help:: ++Show help message and exit. ++ ++-c|--show-coalesce:: ++Show coalesce options ++ ++-C|--coalesce:: ++Set coalesce options ++ ++ adaptive-rx on|off ++ adaptive-tx on|off ++ rx-usecs N ++ rx-frames N ++ rx-usecs-irq N ++ rx-frames-irq N ++ tx-usecs N ++ tx-frames N ++ tx-usecs-irq N ++ tx-frames-irq N ++ stats-block-usecs N ++ pkt-rate-low N ++ rx-usecs-low N ++ rx-frames-low N ++ tx-usecs-low N ++ tx-frames-low N ++ pkt-rate-high N ++ rx-usecs-high N ++ rx-frames-high N ++ tx-usecs-high N ++ tx-frames-high N ++ sample-interval N ++ ++ ++-i|--driver:: ++Show driver information ++ ++-k|--show-offload:: ++Get protocol offload information ++ ++-K|--offload:: ++ Set protocol offload;; ++ [ tso on|off ] ++ ++ ++ ++SEE ALSO ++-------- ++ethtool(8) ++ ++ ++AUTHORS ++------- ++Arnaldo Carvalho de Melo <acme(a)redhat.com> ++ ++Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/spec-tree/python-ethtool-0.5/debian/patches/series b/spec-tree/python-ethtool-0.5/debian/patches/series new file mode 100644 index 0000000..6e26301 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/patches/series @@ -0,0 +1 @@ +debian-changes-0.5-1 diff --git a/spec-tree/python-ethtool-0.5/debian/python-ethtool.manpages b/spec-tree/python-ethtool-0.5/debian/python-ethtool.manpages new file mode 100644 index 0000000..2a14e70 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/python-ethtool.manpages @@ -0,0 +1,2 @@ +man/pethtool.8 +man/pifconfig.8 diff --git a/spec-tree/python-ethtool-0.5/debian/rules b/spec-tree/python-ethtool-0.5/debian/rules new file mode 100755 index 0000000..c5a6480 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/rules @@ -0,0 +1,20 @@ +#!/usr/bin/make -f + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +override_dh_auto_build: + dh_auto_configure --buildsystem=python_distutils + cp -p pethtool.py pethtool + cp -p pifconfig.py pifconfig + a2x -d manpage -f manpage man/pethtool.8.asciidoc + a2x -d manpage -f manpage man/pifconfig.8.asciidoc + +clean: + if [ -f setup.py ]; then dh --buildsystem=python_distutils $@; fi + #rm -f setup.py + rm -f setup.cfg pethtool pifconfig man/pethtool.8 man/pifconfig.8 + rm -rf build + +%: + dh --buildsystem=python_distutils $@ diff --git a/spec-tree/python-ethtool-0.5/debian/source/format b/spec-tree/python-ethtool-0.5/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/spec-tree/python-ethtool-0.5/debian/watch b/spec-tree/python-ethtool-0.5/debian/watch new file mode 100644 index 0000000..012eefc --- /dev/null +++ b/spec-tree/python-ethtool-0.5/debian/watch @@ -0,0 +1,2 @@ +version=3 +http://dsommers.fedorapeople.org/python-ethtool/python-ethtool-(.*)\.tar\.bz2 diff --git a/spec-tree/python-ethtool-0.5/man/pethtool.8.asciidoc b/spec-tree/python-ethtool-0.5/man/pethtool.8.asciidoc new file mode 100644 index 0000000..167114a --- /dev/null +++ b/spec-tree/python-ethtool-0.5/man/pethtool.8.asciidoc @@ -0,0 +1,81 @@ +pethtool(8) +=========== + +NAME +---- +pethtool - Display or change ethernet card settings + + +SYNOPSIS +-------- +pethtool [OPTIONS] [<INTERFACE>] + + +DESCRIPTION +----------- + +This script mimic ethtool behavior, but is written purely in python +and python module ethtool. + + +OPTIONS +------- + +INTERFACE:: +Is the name of the ethernet device on which pethtool should operate. + +-h, --help:: +Show help message and exit. + +-c|--show-coalesce:: +Show coalesce options + +-C|--coalesce:: +Set coalesce options + + adaptive-rx on|off + adaptive-tx on|off + rx-usecs N + rx-frames N + rx-usecs-irq N + rx-frames-irq N + tx-usecs N + tx-frames N + tx-usecs-irq N + tx-frames-irq N + stats-block-usecs N + pkt-rate-low N + rx-usecs-low N + rx-frames-low N + tx-usecs-low N + tx-frames-low N + pkt-rate-high N + rx-usecs-high N + rx-frames-high N + tx-usecs-high N + tx-frames-high N + sample-interval N + + +-i|--driver:: +Show driver information + +-k|--show-offload:: +Get protocol offload information + +-K|--offload:: + Set protocol offload;; + [ tso on|off ] + + + +SEE ALSO +-------- +ethtool(8) + + +AUTHORS +------- +Arnaldo Carvalho de Melo <acme(a)redhat.com> + +Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/spec-tree/python-ethtool-0.5/man/pifconfig.8.asciidoc b/spec-tree/python-ethtool-0.5/man/pifconfig.8.asciidoc new file mode 100644 index 0000000..cbd48b8 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/man/pifconfig.8.asciidoc @@ -0,0 +1,42 @@ +pifconfig(8) +============ + +NAME +---- +pifconfig - display information about a network interface + + +SYNOPSIS +-------- +pifconfig [INTERFACE] + + +DESCRIPTION +----------- + +This script mimic ifconfig behavior, but is written purely in python +and python module ethtool. + + +OPTIONS +------- + +INTERFACE:: +Display information about only this interface. If no interface is given +then all interfaces are displayed. + +-h, --help:: +Show help message and exit. + + +SEE ALSO +-------- +ifconfig(8) + + + +AUTHORS +------- +Arnaldo Carvalho de Melo <acme(a)redhat.com> + +Man page written by Miroslav Suchý <msuchy(a)redhat.com> diff --git a/spec-tree/python-ethtool-0.5/pethtool.py b/spec-tree/python-ethtool-0.5/pethtool.py new file mode 100755 index 0000000..49d667e --- /dev/null +++ b/spec-tree/python-ethtool-0.5/pethtool.py @@ -0,0 +1,380 @@ +#! /usr/bin/python +# -*- python -*- +# -*- coding: utf-8 -*- +# Copyright (C) 2008 Red Hat Inc. +# +# This application is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; version 2. +# +# This application is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +import getopt, ethtool, sys + +def usage(): + print '''Usage: ethtool [OPTIONS] [<interface>] + -h|--help Give this help list + -c|--show-coalesce Show coalesce options + -C|--coalesce Set coalesce options + [adaptive-rx on|off] + [adaptive-tx on|off] + [rx-usecs N] + [rx-frames N] + [rx-usecs-irq N] + [rx-frames-irq N] + [tx-usecs N] + [tx-frames N] + [tx-usecs-irq N] + [tx-frames-irq N] + [stats-block-usecs N] + [pkt-rate-low N] + [rx-usecs-low N] + [rx-frames-low N] + [tx-usecs-low N] + [tx-frames-low N] + [pkt-rate-high N] + [rx-usecs-high N] + [rx-frames-high N] + [tx-usecs-high N] + [tx-frames-high N] + [sample-interval N] + -i|--driver Show driver information + -k|--show-offload Get protocol offload information + -K|--offload Set protocol offload + [ tso on|off ]''' + +tab = "" + +def printtab(msg): + print tab + msg + +all_devices = [] + +ethtool_coalesce_msgs = ( + ( "stats-block-usecs", + "stats_block_coalesce_usecs" ), + ( "sample-interval", + "rate_sample_interval" ), + ( "pkt-rate-low", + "pkt_rate_low"), + ( "pkt-rate-high", + "pkt_rate_high"), + ( "\n" ), + ( "rx-usecs", + "rx_coalesce_usecs"), + ( "rx-frames", + "rx_max_coalesced_frames"), + ( "rx-usecs-irq", + "rx_coalesce_usecs_irq"), + ( "rx-frames-irq", + "rx_max_coalesced_frames_irq"), + ( "\n" ), + ( "tx-usecs", + "tx_coalesce_usecs"), + ( "tx-frames", + "tx_max_coalesced_frames"), + ( "tx-usecs-irq", + "tx_coalesce_usecs_irq"), + ( "tx-frames-irq", + "tx_max_coalesced_frames_irq"), + ( "\n" ), + ( "rx-usecs-low", + "rx_coalesce_usecs_low"), + ( "rx-frame-low", + "rx_max_coalesced_frames_low"), + ( "tx-usecs-low", + "tx_coalesce_usecs_low"), + ( "tx-frame-low", + "tx_max_coalesced_frames_low"), + ( "\n" ), + ( "rx-usecs-high", + "rx_coalesce_usecs_high"), + ( "rx-frame-high", + "rx_max_coalesced_frames_high"), + ( "tx-usecs-high", + "tx_coalesce_usecs_high"), + ( "tx-frame-high", + "tx_max_coalesced_frames_high"), +) + +def get_coalesce_dict_entry(ethtool_name): + if ethtool_name == "adaptive-rx": + return "use_adaptive_rx_coalesce" + + if ethtool_name == "adaptive-tx": + return "use_adaptive_tx_coalesce" + + for name in ethtool_coalesce_msgs: + if name[0] == ethtool_name: + return name[1] + + return None + +def show_coalesce(interface, args = None): + printtab("Coalesce parameters for %s:" % interface) + try: + coal = ethtool.get_coalesce(interface) + except IOError: + printtab(" NOT supported!") + return + + printtab("Adaptive RX: %s TX: %s" % (coal["use_adaptive_rx_coalesce"] and "on" or "off", + coal["use_adaptive_tx_coalesce"] and "on" or "off")) + + printed = [ "use_adaptive_rx_coalesce", + "use_adaptive_tx_coalesce" ] + for tunable in ethtool_coalesce_msgs: + if tunable[0] == '\n': + print + else: + printtab("%s: %s" % (tunable[0], coal[tunable[1]])) + printed.append(tunable[1]) + + coalkeys = coal.keys() + if len(coalkeys) != len(printed): + print + for tunable in coalkeys: + if tunable not in printed: + printtab("%s %s" % (tunable, coal[tunable])) + +def set_coalesce(interface, args): + try: + coal = ethtool.get_coalesce(interface) + except IOError: + printtab("Interrupt coalescing NOT supported on %s!" % interface) + return + + changed = False + args = [a.lower() for a in args] + for arg, value in [ ( args[i], args[i + 1] ) for i in range(0, len(args), 2) ]: + real_arg = get_coalesce_dict_entry(arg) + if not real_arg: + continue + if value == "on": + value = 1 + elif value == "off": + value = 0 + else: + try: + value = int(value) + except: + continue + if coal[real_arg] != value: + coal[real_arg] = value + changed = True + + if not changed: + return + + ethtool.set_coalesce(interface, coal) + +def show_offload(interface, args = None): + try: + sg = ethtool.get_sg(interface) and "on" or "off" + except IOError: + sg = "not supported" + + try: + tso = ethtool.get_tso(interface) and "on" or "off" + except IOError: + tso = "not supported" + + try: + ufo = ethtool.get_ufo(interface) and "on" or "off" + except IOError: + ufo = "not supported" + + try: + gso = ethtool.get_gso(interface) and "on" or "off" + except IOError: + gso = "not supported" + + printtab("scatter-gather: %s" % sg) + printtab("tcp segmentation offload: %s" % tso) + printtab("udp fragmentation offload: %s" % ufo) + printtab("generic segmentation offload: %s" % gso) + +def set_offload(interface, args): + cmd, value = [a.lower() for a in args] + + if cmd == "tso": + value = value == "on" and 1 or 0 + try: + ethtool.set_tso(interface, value) + except: + pass + +ethtool_ringparam_msgs = ( + ( "Pre-set maximums", ), + ( "RX:\t\t", "rx_max_pending" ), + ( "RX Mini:\t", "rx_mini_max_pending" ), + ( "RX Jumbo:\t", "rx_jumbo_max_pending" ), + ( "TX:\t\t", "tx_max_pending" ), + ( "Current hardware settings", ), + ( "RX:\t\t", "rx_pending" ), + ( "RX Mini:\t", "rx_mini_pending" ), + ( "RX Jumbo:\t", "rx_jumbo_pending" ), + ( "TX:\t\t", "tx_pending" ), +) + +def show_ring(interface, args = None): + printtab("Ring parameters for %s:" % interface) + try: + ring = ethtool.get_ringparam(interface) + except IOError: + printtab(" NOT supported!") + return + + printed = [] + for tunable in ethtool_ringparam_msgs: + if len(tunable) == 1: + printtab("%s:" % tunable[0]) + else: + printtab("%s %s" % (tunable[0], ring[tunable[1]])) + printed.append(tunable[1]) + + ringkeys = ring.keys() + if len(ringkeys) != len(printed): + print + for tunable in ringkeys: + if tunable not in printed: + printtab("%s %s" % (tunable, ring[tunable])) + +ethtool_ringparam_map = { + "rx": "rx_pending", + "rx-mini": "rx_mini_pending", + "rx-jumbo": "rx_jumbo_pending", + "tx": "tx_pending", +} + +def set_ringparam(interface, args): + try: + ring = ethtool.get_ringparam(interface) + except IOError: + printtab("ring parameters NOT supported on %s!" % interface) + return + + changed = False + args = [a.lower() for a in args] + for arg, value in [ ( args[i], args[i + 1] ) for i in range(0, len(args), 2) ]: + if not ethtool_ringparam_map.has_key(arg): + continue + try: + value = int(value) + except: + continue + real_arg = ethtool_ringparam_map[arg] + if ring[real_arg] != value: + ring[real_arg] = value + changed = True + + if not changed: + return + + ethtool.set_ringparam(interface, ring) + +def show_driver(interface, args = None): + try: + driver = ethtool.get_module(interface) + except IOError: + driver = "not implemented" + + try: + bus = ethtool.get_businfo(interface) + except IOError: + bus = "not available" + + printtab("driver: %s" % driver) + printtab("bus-info: %s" % bus) + +def run_cmd(cmd, interface, args): + global tab, all_devices + + active_devices = ethtool.get_active_devices() + if not interface: + tab = " " + for interface in all_devices: + inactive = " (not active)" + if interface in active_devices: + inactive = "" + print "%s%s:" % (interface, inactive) + cmd(interface, args) + else: + cmd(interface, args) + +def run_cmd_noargs(cmd, args): + if args: + run_cmd(cmd, args[0], None) + else: + global all_devices + all_devices = ethtool.get_devices() + run_cmd(cmd, None, None) + +def main(): + global all_devices + + try: + opts, args = getopt.getopt(sys.argv[1:], + "hcCgGikK", + ("help", + "show-coalesce", + "coalesce", + "show-ring", + "set-ring", + "driver", + "show-offload", + "offload")) + except getopt.GetoptError, err: + usage() + print str(err) + sys.exit(2) + + if not opts: + usage() + sys.exit(0) + + for o, a in opts: + if o in ("-h", "--help"): + usage() + return + elif o in ("-c", "--show-coalesce"): + run_cmd_noargs(show_coalesce, args) + break + elif o in ("-i", "--driver"): + run_cmd_noargs(show_driver, args) + break + elif o in ("-k", "--show-offload"): + run_cmd_noargs(show_offload, args) + break + elif o in ("-g", "--show-ring"): + run_cmd_noargs(show_ring, args) + break + elif o in ("-K", "--offload", + "-C", "--coalesce", + "-G", "--set-ring"): + all_devices = ethtool.get_devices() + if len(args) < 2: + usage() + sys.exit(1) + + if args[0] not in all_devices: + interface = None + else: + interface = args[0] + args = args[1:] + + if o in ("-K", "--offload"): + cmd = set_offload + elif o in ("-C", "--coalesce"): + cmd = set_coalesce + elif o in ("-G", "--set-ring"): + cmd = set_ringparam + + run_cmd(cmd, interface, args) + break + +if __name__ == '__main__': + main() diff --git a/spec-tree/python-ethtool-0.5/pifconfig.py b/spec-tree/python-ethtool-0.5/pifconfig.py new file mode 100755 index 0000000..cfaa2a6 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/pifconfig.py @@ -0,0 +1,98 @@ +#! /usr/bin/python +# -*- python -*- +# -*- coding: utf-8 -*- +# Copyright (C) 2008 Red Hat Inc. +# +# Arnaldo Carvalho de Melo <acme(a)redhat.com> +# +# This application is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; version 2. +# +# This application is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +import getopt, ethtool, sys + +def usage(): + print '''Usage: + pifconfig <interface> +''' + +def flags2str(flags): + string = "" + if flags & ethtool.IFF_UP: + string += "UP " + if flags & ethtool.IFF_BROADCAST: + string += "BROADCAST " + if flags & ethtool.IFF_DEBUG: + string += "DEBUG " + if flags & ethtool.IFF_LOOPBACK: + string += "LOOPBACK " + if flags & ethtool.IFF_POINTOPOINT: + string += "POINTOPOINT " + if flags & ethtool.IFF_NOTRAILERS: + string += "NOTRAILERS " + if flags & ethtool.IFF_RUNNING: + string += "RUNNING " + if flags & ethtool.IFF_NOARP: + string += "NOARP " + if flags & ethtool.IFF_PROMISC: + string += "PROMISC " + if flags & ethtool.IFF_ALLMULTI: + string += "ALLMULTI " + if flags & ethtool.IFF_MASTER: + string += "MASTER " + if flags & ethtool.IFF_SLAVE: + string += "SLAVE " + if flags & ethtool.IFF_MULTICAST: + string += "MULTICAST " + if flags & ethtool.IFF_PORTSEL: + string += "PORTSEL " + if flags & ethtool.IFF_AUTOMEDIA: + string += "AUTOMEDIA " + if flags & ethtool.IFF_DYNAMIC: + string += "DYNAMIC " + + return string.strip() + +def show_config(device): + ipaddr = ethtool.get_ipaddr(device) + netmask = ethtool.get_netmask(device) + flags = ethtool.get_flags(device) + print '%-9.9s' % device, + if not (flags & ethtool.IFF_LOOPBACK): + print "HWaddr %s" % ethtool.get_hwaddr(device), + print ''' + inet addr:%s''' % ipaddr, + if not (flags & (ethtool.IFF_LOOPBACK | ethtool.IFF_POINTOPOINT)): + print "Bcast:%s" % ethtool.get_broadcast(device), + print ''' Mask:%s + %s +''' % (netmask, flags2str(flags)) + +def main(): + global all_devices + + try: + opts, args = getopt.getopt(sys.argv[1:], + "h", + ("help",)) + except getopt.GetoptError, err: + usage() + print str(err) + sys.exit(2) + + for o, a in opts: + if o in ("-h", "--help"): + usage() + return + + active_devices = ethtool.get_active_devices() + for device in active_devices: + show_config(device) + +if __name__ == '__main__': + main() diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.c b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.c new file mode 100644 index 0000000..41a55fe --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.c @@ -0,0 +1,333 @@ +/* etherinfo.c - Retrieve ethernet interface info via NETLINK + * + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * Parts of this code is based on ideas and solutions in iproute2 + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <Python.h> +#include <bits/sockaddr.h> +#include <stdio.h> +#include <string.h> +#include <sys/types.h> +#include <unistd.h> +#include <stdlib.h> +#include <asm/types.h> +#include <sys/socket.h> +#include <netlink/route/rtnl.h> +#include <assert.h> +#include <errno.h> +#include "etherinfo_struct.h" +#include "etherinfo.h" + +/* + * + * Internal functions for working with struct etherinfo + * + */ + +/** + * Simple macro which makes sure the destination string is freed if used earlier. + * + * @param dst Destination pointer + * @param src Source pointer + * + */ +#define SET_STR_VALUE(dst, src) { \ + if( dst ) { \ + free(dst); \ + }; \ + dst = strdup(src); \ + } + + +/** + * Frees the memory used by a struct ipv6address pointer chain. All elements are freed + * + * @param ptr Pointer to a struct ipv6address chain. + */ +void free_ipv6addresses(struct ipv6address *ptr) { + struct ipv6address *ipv6ptr = ptr; + + if( !ptr ) { + return; + } + + while( ipv6ptr ) { + struct ipv6address *tmp = ipv6ptr->next; + + if( ipv6ptr->address ) { + free(ipv6ptr->address); + } + free(ipv6ptr); + ipv6ptr = tmp; + } +} + +/** + * Frees the memory used by struct etherinfo, including all struct ipv6address children. + * + * @param ptr Pointer to a struct etherninfo element + */ +void free_etherinfo(struct etherinfo *ptr) +{ + if( ptr == NULL ) { // Just for safety + return; + } + + free(ptr->device); + + if( ptr->hwaddress ) { + free(ptr->hwaddress); + } + if( ptr->ipv4_address ) { + free(ptr->ipv4_address); + } + if( ptr->ipv4_broadcast ) { + free(ptr->ipv4_broadcast); + } + if( ptr->ipv6_addresses ) { + free_ipv6addresses(ptr->ipv6_addresses); + } + free(ptr); +} + + +/** + * Add a new IPv6 address record to a struct ipv6address chain + * + * @param addrptr Pointer to the current IPv6 address chain. + * @param addr IPv6 address, represented as char * string + * @param netmask IPv6 netmask, as returned by libnl rtnl_addr_get_prefixlen() + * @param scope IPV6 address scope, as returned by libnl rtnl_addr_get_scope() + * + * @return Returns a new pointer to the chain containing the new element + */ +struct ipv6address * etherinfo_add_ipv6(struct ipv6address *addrptr, const char *addr, int netmask, int scope) { + struct ipv6address *newaddr = NULL; + + newaddr = calloc(1, sizeof(struct ipv6address)+2); + if( !newaddr ) { + fprintf(stderr, "** ERROR ** Could not allocate memory for a new IPv6 address record (%s/%i [%i])", + addr, netmask, scope); + return addrptr; + } + + SET_STR_VALUE(newaddr->address, addr); + newaddr->netmask = netmask; + newaddr->scope = scope; + newaddr->next = addrptr; + return newaddr; +} + + +/** + * libnl callback function. Does the real parsing of a record returned by NETLINK. This function + * parses LINK related packets + * + * @param obj Pointer to a struct nl_object response + * @param arg Pointer to a struct etherinfo element where the parse result will be saved + */ +static void callback_nl_link(struct nl_object *obj, void *arg) +{ + struct etherinfo *ethi = (struct etherinfo *) arg; + struct rtnl_link *link = (struct rtnl_link *) obj; + struct nl_addr *addr = rtnl_link_get_addr(link); + unsigned int i, len; + unsigned char *binaddr; + char hwaddr[130], *ptr; + + if( (ethi == NULL) || (ethi->hwaddress != NULL) ) { + return; + } + + binaddr = nl_addr_get_binary_addr(addr); + memset(&hwaddr, 0, 130); + len = 20; + ptr = (char *)&hwaddr; + for( i = 0; i < 6; i++ ) { + if( i == 0 ) { + snprintf(ptr, len, "%02X", *(binaddr+i)); + len -= 2; + ptr += 2; + } else { + snprintf(ptr, len, ":%02X", *(binaddr+i)); + len -= 3; + ptr += 3; + } + } + SET_STR_VALUE(ethi->hwaddress, hwaddr); +} + + +/** + * libnl callback function. Does the real parsing of a record returned by NETLINK. This function + * parses ADDRESS related packets + * + * @param obj Pointer to a struct nl_object response + * @param arg Pointer to a struct etherinfo element where the parse result will be saved + */ +static void callback_nl_address(struct nl_object *obj, void *arg) +{ + struct etherinfo *ethi = (struct etherinfo *) arg; + struct nl_addr *addr; + char ip_str[66]; + int family; + + if( ethi == NULL ) { + return; + } + + addr = rtnl_addr_get_local((struct rtnl_addr *)obj); + family = nl_addr_get_family(addr); + switch( family ) { + case AF_INET: + case AF_INET6: + memset(&ip_str, 0, 66); + inet_ntop(family, nl_addr_get_binary_addr(addr), (char *)&ip_str, 64); + + if( family == AF_INET ) { + struct nl_addr *brdcst = rtnl_addr_get_broadcast((struct rtnl_addr *)obj); + char brdcst_str[66]; + + SET_STR_VALUE(ethi->ipv4_address, ip_str); + ethi->ipv4_netmask = rtnl_addr_get_prefixlen((struct rtnl_addr*) obj); + + if( brdcst ) { + memset(&brdcst_str, 0, 66); + inet_ntop(family, nl_addr_get_binary_addr(brdcst), (char *)&brdcst_str, 64); + SET_STR_VALUE(ethi->ipv4_broadcast, brdcst_str); + } + } else { + ethi->ipv6_addresses = etherinfo_add_ipv6(ethi->ipv6_addresses, + ip_str, + rtnl_addr_get_prefixlen((struct rtnl_addr*) obj), + rtnl_addr_get_scope((struct rtnl_addr*) obj)); + } + return; + default: + return; + } +} + + + +/* + * + * Exported functions - API frontend + * + */ + +/** + * Dumps the contents of a struct etherinfo element to file + * + * @param fp FILE pointer where to dump + * @param ptr Pointer to a struct etherinfo element + */ +void dump_etherinfo(FILE *fp, struct etherinfo *ptr) +{ + + fprintf(fp, "*** Interface [%i] %s ", ptr->index, ptr->device); + if( ptr->hwaddress ) { + fprintf(fp, "MAC address: %s", ptr->hwaddress); + } + fprintf(fp, "\n"); + if( ptr->ipv4_address ) { + fprintf(fp, "\tIPv4 Address: %s/%i", + ptr->ipv4_address, ptr->ipv4_netmask); + if( ptr->ipv4_broadcast ) { + fprintf(fp, " - Broadcast: %s", ptr->ipv4_broadcast); + } + fprintf(fp, "\n"); + } + if( ptr->ipv6_addresses ) { + struct ipv6address *ipv6 = ptr->ipv6_addresses; + + fprintf(fp, "\tIPv6 addresses:\n"); + for(; ipv6; ipv6 = ipv6->next) { + char scope[66]; + + rtnl_scope2str(ipv6->scope, scope, 64); + fprintf(fp, "\t [%s] %s/%i\n", + scope, ipv6->address, ipv6->netmask); + } + } + fprintf(fp, "\n"); +} + + +/** + * Query NETLINK for ethernet configuration + * + * @param ethinf Pointer to an available struct etherinfo element. The 'device' member + * must contain a valid string to the device to query for information + * @param nlc Pointer to the libnl handle, which is used for the query against NETLINK + * @param query What to query for. Must be NLQRY_LINK or NLQRY_ADDR. + * + * @return Returns 1 on success, otherwise 0. + */ +int get_etherinfo(struct etherinfo *ethinf, struct nl_handle *nlc, nlQuery query) +{ + struct nl_cache *link_cache; + struct nl_cache *addr_cache; + struct rtnl_addr *addr; + struct rtnl_link *link; + int ret = 0; + + if( !ethinf || !nlc ) { + return 0; + } + + /* Find the interface index we're looking up. + * As we don't expect it to change, we're reusing a "cached" + * interface index if we have that + */ + if( ethinf->index < 0 ) { + link_cache = rtnl_link_alloc_cache(nlc); + ethinf->index = rtnl_link_name2i(link_cache, ethinf->device); + if( ethinf->index < 0 ) { + return 0; + } + nl_cache_free(link_cache); + } + + /* Query the for requested info vai NETLINK */ + switch( query ) { + case NLQRY_LINK: + /* Extract MAC/hardware address of the interface */ + link_cache = rtnl_link_alloc_cache(nlc); + link = rtnl_link_alloc(); + rtnl_link_set_ifindex(link, ethinf->index); + nl_cache_foreach_filter(link_cache, (struct nl_object *)link, callback_nl_link, ethinf); + rtnl_link_put(link); + nl_cache_free(link_cache); + ret = 1; + break; + + case NLQRY_ADDR: + /* Extract IP address information */ + addr_cache = rtnl_addr_alloc_cache(nlc); + addr = rtnl_addr_alloc(); + rtnl_addr_set_ifindex(addr, ethinf->index); + nl_cache_foreach_filter(addr_cache, (struct nl_object *)addr, callback_nl_address, ethinf); + rtnl_addr_put(addr); + nl_cache_free(addr_cache); + ret = 1; + break; + + default: + ret = 0; + } + return ret; +} + diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.h b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.h new file mode 100644 index 0000000..db368db --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo.h @@ -0,0 +1,35 @@ +/* etherinfo.h - Retrieve ethernet interface info via NETLINK + * + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _ETHERINFO_H +#define _ETHERINFO_H + +#include <netlink/addr.h> +#include <netlink/netlink.h> +#include <netlink/handlers.h> +#include <netlink/route/link.h> +#include <netlink/route/addr.h> +#include <arpa/inet.h> + +typedef enum {NLQRY_LINK, NLQRY_ADDR} nlQuery; /**< Supported query types in the etherinfo code */ + +int get_etherinfo(struct etherinfo *ethinf, struct nl_handle *nlc, nlQuery query); +void free_etherinfo(struct etherinfo *ptr); +void dump_etherinfo(FILE *, struct etherinfo *); + +void free_ipv6addresses(struct ipv6address *ptr); + +#endif diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c new file mode 100644 index 0000000..fb751d4 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_ipv6_obj.c @@ -0,0 +1,230 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/** + * @file etherinfo_ipv6_obj.c + * @author David Sommerseth <davids(a)redhat.com> + * @date Thu Jul 29 17:51:28 2010 + * + * @brief Python ethtool.etherinfo class functions. + * + */ + +#include <Python.h> +#include "structmember.h" + +#include <netlink/route/rtnl.h> +#include "etherinfo_struct.h" +#include "etherinfo.h" + + +/** + * ethtool.etherinfo_ipv6addr deallocator - cleans up when a object is deleted + * + * @param self etherinfo_ipv6addr_py object structure + */ +void _ethtool_etherinfo_ipv6_dealloc(etherinfo_ipv6addr_py *self) +{ + if( self->addrdata ) { + free_ipv6addresses(self->addrdata); + } + self->ob_type->tp_free((PyObject*)self); +} + + +/** + * ethtool.etherinfo_ipv6addr function, creating a new etherinfo object + * + * @param type + * @param args + * @param kwds + * + * @return Returns in PyObject with the new object on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_ipv6_new(PyTypeObject *type, PyObject *args, PyObject *kwds) +{ + etherinfo_ipv6addr_py *self; + + self = (etherinfo_ipv6addr_py *)type->tp_alloc(type, 0); + return (PyObject *)self; +} + + +/** + * ethtool.etherinfo_ipv6addr init (constructor) method. Makes sure the object is initialised correctly. + * + * @param self + * @param args + * @param kwds + * + * @return Returns 0 on success. + */ +int _ethtool_etherinfo_ipv6_init(etherinfo_ipv6addr_py *self, PyObject *args, PyObject *kwds) +{ + static char *etherinfo_kwlist[] = {"etherinfo_ipv6_ptr", NULL}; + PyObject *ethinf_ptr = NULL; + + if( !PyArg_ParseTupleAndKeywords(args, kwds, "O", etherinfo_kwlist, &ethinf_ptr)) { + PyErr_SetString(PyExc_AttributeError, "Invalid data pointer to constructor"); + return -1; + } + self->addrdata = (struct ipv6address *) PyCObject_AsVoidPtr(ethinf_ptr); + return 0; +} + +/** + * ethtool.etherinfo_ipv6addr function for retrieving data from a Python object. + * + * @param self + * @param attr_o contains the object member request (which element to return) + * + * @return Returns a PyObject with the value requested on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_ipv6_getter(etherinfo_ipv6addr_py *self, PyObject *attr_o) +{ + PyObject *ret; + char *attr = PyString_AsString(attr_o); + + if( !self || !self->addrdata ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + if( strcmp(attr, "address") == 0 ) { + ret = RETURN_STRING(self->addrdata->address); + } else if( strcmp(attr, "netmask") == 0 ) { + ret = PyInt_FromLong(self->addrdata->netmask); + } else if( strcmp(attr, "scope") == 0 ) { + char scope[66]; + + rtnl_scope2str(self->addrdata->scope, scope, 66); + ret = PyString_FromString(scope); + } else { + ret = PyObject_GenericGetAttr((PyObject *)self, attr_o); + } + return ret; +} + + +/** + * ethtool.etherinfo_ipv6addr function for setting a value to a object member. This feature is + * disabled by always returning -1, as the values are read-only by the user. + * + * @param self + * @param attr_o + * @param val_o + * + * @return Returns always -1 (failure). + */ +int _ethtool_etherinfo_ipv6_setter(etherinfo_ipv6addr_py *self, PyObject *attr_o, PyObject *val_o) +{ + PyErr_SetString(PyExc_AttributeError, "etherinfo_ipv6addr member values are read-only."); + return -1; +} + + +/** + * Creates a human readable format of the information when object is being treated as a string + * + * @param self + * + * @return Returns a PyObject with a string with all of the information + */ +PyObject *_ethtool_etherinfo_ipv6_str(etherinfo_ipv6addr_py *self) +{ + char scope[66]; + + if( !self || !self->addrdata ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + rtnl_scope2str(self->addrdata->scope, scope, 64); + return PyString_FromFormat("[%s] %s/%i", + scope, + self->addrdata->address, + self->addrdata->netmask); +} + + +/** + * This is required by Python, which lists all accessible methods + * in the object. But no methods are provided. + * + */ +static PyMethodDef _ethtool_etherinfo_ipv6_methods[] = { + {NULL} /**< No methods defined */ +}; + +/** + * Defines all accessible object members + * + */ +static PyMemberDef _ethtool_etherinfo_ipv6_members[] = { + {"address", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, + "IPv6 address"}, + {"netmask", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, + "IPv6 netmask"}, + {"scope", T_OBJECT_EX, offsetof(etherinfo_ipv6addr_py, addrdata), 0, + "IPv6 IP address scope"}, + {NULL} /* End of member list */ +}; + +/** + * Definition of the functions a Python class/object requires. + * + */ +PyTypeObject ethtool_etherinfoIPv6Type = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "ethtool.etherinfo_ipv6addr", /*tp_name*/ + sizeof(etherinfo_ipv6addr_py), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + (destructor)_ethtool_etherinfo_ipv6_dealloc,/*tp_dealloc*/ + 0, /*tp_print*/ + 0, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash */ + 0, /*tp_call*/ + (reprfunc)_ethtool_etherinfo_ipv6_str, /*tp_str*/ + (getattrofunc)_ethtool_etherinfo_ipv6_getter, /*tp_getattro*/ + (setattrofunc)_ethtool_etherinfo_ipv6_setter, /*tp_setattro*/ + 0, /*tp_as_buffer*/ + Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ + "IPv6 address information", /* tp_doc */ + 0, /* tp_traverse */ + 0, /* tp_clear */ + 0, /* tp_richcompare */ + 0, /* tp_weaklistoffset */ + 0, /* tp_iter */ + 0, /* tp_iternext */ + _ethtool_etherinfo_ipv6_methods, /* tp_methods */ + _ethtool_etherinfo_ipv6_members, /* tp_members */ + 0, /* tp_getset */ + 0, /* tp_base */ + 0, /* tp_dict */ + 0, /* tp_descr_get */ + 0, /* tp_descr_set */ + 0, /* tp_dictoffset */ + (initproc)_ethtool_etherinfo_ipv6_init, /* tp_init */ + 0, /* tp_alloc */ + _ethtool_etherinfo_ipv6_new, /* tp_new */ +}; + diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.c b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.c new file mode 100644 index 0000000..04eb634 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.c @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + + +/** + * @file etherinfo_obj.c + * @author David Sommerseth <davids(a)redhat.com> + * @date Fri Sep 4 18:41:28 2009 + * + * @brief Python ethtool.etherinfo class functions. + * + */ + +#include <Python.h> +#include "structmember.h" + +#include <netlink/route/rtnl.h> +#include "etherinfo_struct.h" +#include "etherinfo.h" + +extern PyTypeObject ethtool_etherinfoIPv6Type; + +/** + * ethtool.etherinfo deallocator - cleans up when a object is deleted + * + * @param self etherinfo_py object structure + */ +void _ethtool_etherinfo_dealloc(etherinfo_py *self) +{ + if( self->data ) { + if( self->data->ethinfo ) { + free_etherinfo(self->data->ethinfo); + } + free(self->data); + } + self->ob_type->tp_free((PyObject*)self); +} + + +/** + * ethtool.etherinfo function, creating a new etherinfo object + * + * @param type + * @param args + * @param kwds + * + * @return Returns in PyObject with the new object on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_new(PyTypeObject *type, PyObject *args, PyObject *kwds) +{ + etherinfo_py *self; + + self = (etherinfo_py *)type->tp_alloc(type, 0); + return (PyObject *)self; +} + + +/** + * ethtool.etherinfo init (constructor) method. Makes sure the object is initialised correctly. + * + * @param self + * @param args + * @param kwds + * + * @return Returns 0 on success. + */ +int _ethtool_etherinfo_init(etherinfo_py *self, PyObject *args, PyObject *kwds) +{ + static char *etherinfo_kwlist[] = {"etherinfo_ptr", NULL}; + PyObject *ethinf_ptr = NULL; + + if( !PyArg_ParseTupleAndKeywords(args, kwds, "O", etherinfo_kwlist, &ethinf_ptr)) { + PyErr_SetString(PyExc_AttributeError, "Invalid data pointer to constructor"); + return -1; + } + self->data = (struct etherinfo_obj_data *) PyCObject_AsVoidPtr(ethinf_ptr); + return 0; +} + +/** + * ethtool.etherinfo function for retrieving data from a Python object. + * + * @param self + * @param attr_o contains the object member request (which element to return) + * + * @return Returns a PyObject with the value requested on success, otherwise NULL + */ +PyObject *_ethtool_etherinfo_getter(etherinfo_py *self, PyObject *attr_o) +{ + PyObject *ret; + char *attr = PyString_AsString(attr_o); + + if( !self || !self->data ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + if( strcmp(attr, "device") == 0 ) { + ret = RETURN_STRING(self->data->ethinfo->device); + } else if( strcmp(attr, "mac_address") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_LINK); + ret = RETURN_STRING(self->data->ethinfo->hwaddress); + } else if( strcmp(attr, "ipv4_address") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ret = RETURN_STRING(self->data->ethinfo->ipv4_address); + } else if( strcmp(attr, "ipv4_netmask") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ret = PyInt_FromLong(self->data->ethinfo->ipv4_netmask); + } else if( strcmp(attr, "ipv4_broadcast") == 0 ) { + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ret = RETURN_STRING(self->data->ethinfo->ipv4_broadcast); + } else { + ret = PyObject_GenericGetAttr((PyObject *)self, attr_o); + } + return ret; +} + +/** + * ethtool.etherinfo function for setting a value to a object member. This feature is + * disabled by always returning -1, as the values are read-only by the user. + * + * @param self + * @param attr_o + * @param val_o + * + * @return Returns always -1 (failure). + */ +int _ethtool_etherinfo_setter(etherinfo_py *self, PyObject *attr_o, PyObject *val_o) +{ + PyErr_SetString(PyExc_AttributeError, "etherinfo member values are read-only."); + return -1; +} + + +/** + * Creates a human readable format of the information when object is being treated as a string + * + * @param self + * + * @return Returns a PyObject with a string with all of the information + */ +PyObject *_ethtool_etherinfo_str(etherinfo_py *self) +{ + PyObject *ret = NULL; + + if( !self || !self->data || !self->data->nlc || !self->data->ethinfo ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_LINK); + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + + ret = PyString_FromFormat("Device %s:\n", self->data->ethinfo->device); + if( self->data->ethinfo->hwaddress ) { + PyObject *tmp = PyString_FromFormat("\tMAC address: %s\n", self->data->ethinfo->hwaddress); + PyString_Concat(&ret, tmp); + } + + if( self->data->ethinfo->ipv4_address ) { + PyObject *tmp = PyString_FromFormat("\tIPv4 address: %s/%i", + self->data->ethinfo->ipv4_address, + self->data->ethinfo->ipv4_netmask); + if( self->data->ethinfo->ipv4_broadcast ) { + PyObject *tmp2 = PyString_FromFormat(" Broadcast: %s", + self->data->ethinfo->ipv4_broadcast); + PyString_Concat(&tmp, tmp2); + } + PyString_Concat(&tmp, PyString_FromString("\n")); + PyString_Concat(&ret, tmp); + } + + if( self->data->ethinfo->ipv6_addresses ) { + struct ipv6address *ipv6 = self->data->ethinfo->ipv6_addresses; + PyObject *tmp = PyString_FromFormat("\tIPv6 addresses:\n"); + PyString_Concat(&ret, tmp); + + for( ; ipv6; ipv6 = ipv6->next) { + char scope[66]; + + rtnl_scope2str(ipv6->scope, scope, 64); + PyObject *addr = PyString_FromFormat("\t [%s] %s/%i\n", + scope, ipv6->address, ipv6->netmask); + PyString_Concat(&ret, addr); + } + } + return ret; +} + + +/** + * Returns a tuple list of ethertool.etherinfo_ipv6addr objects, containing configured + * IPv6 addresses + * + * @param self + * @param notused + * + * @return Returns a Python tuple list of ethertool.etherinfo_ipv6addr objects + */ +PyObject * _ethtool_etherinfo_get_ipv6_addresses(etherinfo_py *self, PyObject *notused) { + PyObject *ret; + struct ipv6address *ipv6 = NULL; + int i = 0; + + if( !self || !self->data ) { + PyErr_SetString(PyExc_AttributeError, "No data available"); + return NULL; + } + + get_etherinfo(self->data->ethinfo, self->data->nlc, NLQRY_ADDR); + ipv6 = self->data->ethinfo->ipv6_addresses; + ret = PyTuple_New(1); + while( ipv6 ) { + PyObject *ipv6_pyobj = NULL, *ipv6_pydata = NULL, *args = NULL; + struct ipv6address *next = ipv6->next; + + ipv6->next = NULL; + ipv6_pydata = PyCObject_FromVoidPtr(ipv6, NULL); + args = PyTuple_New(1); + PyTuple_SetItem(args, 0, ipv6_pydata); + ipv6_pyobj = PyObject_CallObject((PyObject *)&ethtool_etherinfoIPv6Type, args); + if( ipv6_pyobj ) { + PyTuple_SetItem(ret, i++, ipv6_pyobj); + _PyTuple_Resize(&ret, i+1); + Py_INCREF(ipv6_pyobj); + } + ipv6 = next; + } + _PyTuple_Resize(&ret, i); + return ret; +} + + +/** + * Defines all available methods in the ethtool.etherinfo class + * + */ +static PyMethodDef _ethtool_etherinfo_methods[] = { + {"get_ipv6_addresses", _ethtool_etherinfo_get_ipv6_addresses, METH_NOARGS, + "Retrieve configured IPv6 addresses. Returns a tuple list of etherinfo_ipv6addr objects"}, + {NULL} /**< No methods defined */ +}; + +/** + * Defines all accessible object members + * + */ +static PyMemberDef _ethtool_etherinfo_members[] = { + {"device", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "Device name of the interface"}, + {"mac_address", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "MAC address / hardware address of the interface"}, + {"ipv4_address", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "IPv4 address"}, + {"ipv4_netmask", T_INT, offsetof(etherinfo_py, data), 0, + "IPv4 netmask in bits"}, + {"ipv4_broadcast", T_OBJECT_EX, offsetof(etherinfo_py, data), 0, + "IPv4 broadcast address"}, + {NULL} /* End of member list */ +}; + +/** + * Definition of the functions a Python class/object requires. + * + */ +PyTypeObject ethtool_etherinfoType = { + PyObject_HEAD_INIT(NULL) + 0, /*ob_size*/ + "ethtool.etherinfo", /*tp_name*/ + sizeof(etherinfo_py), /*tp_basicsize*/ + 0, /*tp_itemsize*/ + (destructor)_ethtool_etherinfo_dealloc,/*tp_dealloc*/ + 0, /*tp_print*/ + 0, /*tp_getattr*/ + 0, /*tp_setattr*/ + 0, /*tp_compare*/ + 0, /*tp_repr*/ + 0, /*tp_as_number*/ + 0, /*tp_as_sequence*/ + 0, /*tp_as_mapping*/ + 0, /*tp_hash */ + 0, /*tp_call*/ + (reprfunc)_ethtool_etherinfo_str, /*tp_str*/ + (getattrofunc)_ethtool_etherinfo_getter, /*tp_getattro*/ + (setattrofunc)_ethtool_etherinfo_setter, /*tp_setattro*/ + 0, /*tp_as_buffer*/ + Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ + "Contains information about a specific ethernet device", /* tp_doc */ + 0, /* tp_traverse */ + 0, /* tp_clear */ + 0, /* tp_richcompare */ + 0, /* tp_weaklistoffset */ + 0, /* tp_iter */ + 0, /* tp_iternext */ + _ethtool_etherinfo_methods, /* tp_methods */ + _ethtool_etherinfo_members, /* tp_members */ + 0, /* tp_getset */ + 0, /* tp_base */ + 0, /* tp_dict */ + 0, /* tp_descr_get */ + 0, /* tp_descr_set */ + 0, /* tp_dictoffset */ + (initproc)_ethtool_etherinfo_init, /* tp_init */ + 0, /* tp_alloc */ + _ethtool_etherinfo_new, /* tp_new */ +}; + diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.h b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.h new file mode 100644 index 0000000..ce77f79 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_obj.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/** + * @file etherinfo_obj.c + * @author David Sommerseth <davids(a)redhat.com> + * @date Fri Sep 4 18:41:28 2009 + * + * @brief Python ethtool.etherinfo class functions (header file). + * + */ + +#ifndef __ETHERINFO_OBJ_H +#define __ETHERINFO_OBJ_H + +#include <Python.h> +#include "etherinfo_struct.h" + +void _ethtool_etherinfo_dealloc(etherinfo_py *); +PyObject *_ethtool_etherinfo_new(PyTypeObject *, PyObject *, PyObject *); +int _ethtool_etherinfo_init(etherinfo_py *, PyObject *, PyObject *); +PyObject *_ethtool_etherinfo_getter(etherinfo_py *, PyObject *); +int _ethtool_etherinfo_setter(etherinfo_py *, PyObject *, PyObject *); +PyObject *_ethtool_etherinfo_str(etherinfo_py *self); + +#endif diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_struct.h b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_struct.h new file mode 100644 index 0000000..b1d453f --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/etherinfo_struct.h @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2009-2010 Red Hat Inc. + * + * David Sommerseth <davids(a)redhat.com> + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/** + * @file etherinfo_struct.h + * @author David Sommerseth <dsommers(a)wsdsommers.usersys.redhat.com> + * @date Fri Sep 4 19:06:06 2009 + * + * @brief Contains the internal ethtool.etherinfo data structure + * + */ + +#ifndef _ETHERINFO_STRUCT_H +#define _ETHERINFO_STRUCT_H + +/** + * Contains IP address information about a particular ethernet device + * + */ +struct etherinfo { + char *device; /**< Device name */ + int index; /**< NETLINK index reference */ + char *hwaddress; /**< HW address / MAC address of device */ + char *ipv4_address; /**< Configured IPv4 address */ + int ipv4_netmask; /**< Configured IPv4 netmask */ + char *ipv4_broadcast; /**< Configured IPv4 broadcast address */ + struct ipv6address *ipv6_addresses; /**< Configured IPv6 addresses (as a pointer chain) */ +}; + + +/** + * Pointer chain with IPv6 addresses associated with a ethernet interface. Used + * by struct etherinfo + */ +struct ipv6address { + char *address; /**< Configured IPv6 address */ + int netmask; /**< Configured IPv6 netmask */ + int scope; /**< Scope for the IPv6 address */ + struct ipv6address *next; /**< Pointer to next configured IPv6 address */ +}; + + +/** + * Contains the internal data structure of the + * ethtool.etherinfo object. + * + */ +struct etherinfo_obj_data { + struct nl_handle *nlc; /**< Contains NETLINK connection info */ + struct etherinfo *ethinfo; /**< Contains info about our current interface */ +}; + +/** + * A Python object of struct etherinfo_obj_data + * + */ +typedef struct { + PyObject_HEAD + struct etherinfo_obj_data *data; /* IPv4 and IPv6 address information, only one element used */ +} etherinfo_py; + +/** + * A Python object of struct ipv6address + * + */ +typedef struct { + PyObject_HEAD + struct ipv6address *addrdata; /**< IPv6 address, only one element is used in this case */ +} etherinfo_ipv6addr_py; + +/** + * NULL safe PyString_FromString() wrapper. If input string is NULL, None will be returned + * + * @param str Input C string (char *) + * + * @return Returns a PyObject with either the input string wrapped up, or a Python None value. + */ +#define RETURN_STRING(str) (str ? PyString_FromString(str) : Py_None) + +#endif diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/ethtool-copy.h b/spec-tree/python-ethtool-0.5/python-ethtool/ethtool-copy.h new file mode 100644 index 0000000..e5b7832 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/ethtool-copy.h @@ -0,0 +1,373 @@ +/* + * ethtool.h: Defines for Linux ethtool. + * + * Copyright (C) 1998 David S. Miller (davem(a)redhat.com) + * Copyright 2001 Jeff Garzik <jgarzik(a)mandrakesoft.com> + * Portions Copyright 2001 Sun Microsystems (thockin(a)sun.com) + * Portions Copyright 2002 Intel (eli.kupermann(a)intel.com, + * christopher.leech(a)intel.com, + * scott.feldman(a)intel.com) + */ + +#ifndef _LINUX_ETHTOOL_H +#define _LINUX_ETHTOOL_H + +#ifndef __unused +#define __unused __attribute__ ((unused)) +#endif + +/* This should work for both 32 and 64 bit userland. */ +struct ethtool_cmd { + u32 cmd; + u32 supported; /* Features this interface supports */ + u32 advertising; /* Features this interface advertises */ + u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + u8 duplex; /* Duplex, half or full */ + u8 port; /* Which connector port */ + u8 phy_address; + u8 transceiver; /* Which tranceiver to use */ + u8 autoneg; /* Enable or disable autonegotiation */ + u32 maxtxpkt; /* Tx pkts before generating tx int */ + u32 maxrxpkt; /* Rx pkts before generating rx int */ + u32 reserved[4]; +}; + +#define ETHTOOL_BUSINFO_LEN 32 +/* these strings are set to whatever the driver author decides... */ +struct ethtool_drvinfo { + u32 cmd; + char driver[32]; /* driver short name, "tulip", "eepro100" */ + char version[32]; /* driver version string */ + char fw_version[32]; /* firmware version string, if applicable */ + char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ + /* For PCI devices, use pci_dev->slot_name. */ + char reserved1[32]; + char reserved2[16]; + u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + u32 testinfo_len; + u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ + u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ +}; + +#define SOPASS_MAX 6 +/* wake-on-lan settings */ +struct ethtool_wolinfo { + u32 cmd; + u32 supported; + u32 wolopts; + u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; + +/* for passing single values */ +struct ethtool_value { + u32 cmd; + u32 data; +}; + +/* for passing big chunks of data */ +struct ethtool_regs { + u32 cmd; + u32 version; /* driver-specific, indicates different chips/revs */ + u32 len; /* bytes */ + u8 data[0]; +}; + +/* for passing EEPROM chunks */ +struct ethtool_eeprom { + u32 cmd; + u32 magic; + u32 offset; /* in bytes */ + u32 len; /* in bytes */ + u8 data[0]; +}; + +/* for configuring coalescing parameters of chip */ +struct ethtool_coalesce { + u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + + /* How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only rx_max_coalesced_frames + * is used. + */ + u32 rx_coalesce_usecs; + + /* How many packets to delay an RX interrupt after + * a packet arrives. If 0, only rx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause RX interrupts to never be + * generated. + */ + u32 rx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being services by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 rx_coalesce_usecs_irq; + u32 rx_max_coalesced_frames_irq; + + /* How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only tx_max_coalesced_frames + * is used. + */ + u32 tx_coalesce_usecs; + + /* How many packets to delay a TX interrupt after + * a packet is sent. If 0, only tx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause TX interrupts to never be + * generated. + */ + u32 tx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being services by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 tx_coalesce_usecs_irq; + u32 tx_max_coalesced_frames_irq; + + /* How many usecs to delay in-memory statistics + * block updates. Some drivers do not have an in-memory + * statistic block, and in such cases this value is ignored. + * This value must not be zero. + */ + u32 stats_block_coalesce_usecs; + + /* Adaptive RX/TX coalescing is an algorithm implemented by + * some drivers to improve latency under low packet rates and + * improve throughput under high packet rates. Some drivers + * only implement one of RX or TX adaptive coalescing. Anything + * not implemented by the driver causes these values to be + * silently ignored. + */ + u32 use_adaptive_rx_coalesce; + u32 use_adaptive_tx_coalesce; + + /* When the packet rate (measured in packets per second) + * is below pkt_rate_low, the {rx,tx}_*_low parameters are + * used. + */ + u32 pkt_rate_low; + u32 rx_coalesce_usecs_low; + u32 rx_max_coalesced_frames_low; + u32 tx_coalesce_usecs_low; + u32 tx_max_coalesced_frames_low; + + /* When the packet rate is below pkt_rate_high but above + * pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ + + /* When the packet rate is (measured in packets per second) + * is above pkt_rate_high, the {rx,tx}_*_high parameters are + * used. + */ + u32 pkt_rate_high; + u32 rx_coalesce_usecs_high; + u32 rx_max_coalesced_frames_high; + u32 tx_coalesce_usecs_high; + u32 tx_max_coalesced_frames_high; + + /* How often to do adaptive coalescing packet rate sampling, + * measured in seconds. Must not be zero. + */ + u32 rate_sample_interval; +}; + +/* for configuring RX/TX ring parameters */ +struct ethtool_ringparam { + u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + u32 rx_max_pending; + u32 rx_mini_max_pending; + u32 rx_jumbo_max_pending; + u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + u32 rx_pending; + u32 rx_mini_pending; + u32 rx_jumbo_pending; + u32 tx_pending; +}; + +/* for configuring link flow control parameters */ +struct ethtool_pauseparam { + u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autonet' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + u32 autoneg; + u32 rx_pause; + u32 tx_pause; +}; + +#define ETH_GSTRING_LEN 32 +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, +}; + +/* for passing string sets for data tagging */ +struct ethtool_gstrings { + u32 cmd; /* ETHTOOL_GSTRINGS */ + u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + u32 len; /* number of strings in the string set */ + u8 data[0]; +}; + +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ + ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ +}; + +/* for requesting NIC test and getting results*/ +struct ethtool_test { + u32 cmd; /* ETHTOOL_TEST */ + u32 flags; /* ETH_TEST_FL_xxx */ + u32 reserved; + u32 len; /* result length, in number of u64 elements */ + u64 data[0]; +}; + +/* for dumping NIC-specific statistics */ +struct ethtool_stats { + u32 cmd; /* ETHTOOL_GSTATS */ + u32 n_stats; /* number of u64's being returned */ + u64 data[0]; +}; + +/* CMDs currently supported */ +#define ETHTOOL_GSET 0x00000001 /* Get settings. */ +#define ETHTOOL_SSET 0x00000002 /* Set settings, privileged. */ +#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers, privileged. */ +#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ +#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options, priv. */ +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv. */ +#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data, priv. */ +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config, priv. */ +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters, priv. */ +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value), priv. */ +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ +#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ +#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ +#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ + +/* compatibility with older code */ +#define SPARC_ETH_GSET ETHTOOL_GSET +#define SPARC_ETH_SSET ETHTOOL_SSET + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) + +/* Indicates what features are advertised by the interface. */ +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) + +/* The following are all involved in forcing a particular link + * mode for the device for setting things. When getting the + * devices settings, these indicate the current mode and whether + * it was foced up into this mode or autonegotiated. + */ + +/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */ +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_10000 10000 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 + +/* Which connector port. */ +#define PORT_TP 0x00 +#define PORT_AUI 0x01 +#define PORT_MII 0x02 +#define PORT_FIBRE 0x03 +#define PORT_BNC 0x04 + +/* Which tranceiver to use. */ +#define XCVR_INTERNAL 0x00 +#define XCVR_EXTERNAL 0x01 +#define XCVR_DUMMY1 0x02 +#define XCVR_DUMMY2 0x03 +#define XCVR_DUMMY3 0x04 + +/* Enable or disable autonegotiation. If this is set to enable, + * the forced link modes above are completely ignored. + */ +#define AUTONEG_DISABLE 0x00 +#define AUTONEG_ENABLE 0x01 + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +#endif /* _LINUX_ETHTOOL_H */ diff --git a/spec-tree/python-ethtool-0.5/python-ethtool/ethtool.c b/spec-tree/python-ethtool-0.5/python-ethtool/ethtool.c new file mode 100644 index 0000000..feb6917 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/python-ethtool/ethtool.c @@ -0,0 +1,1062 @@ +/* + * Copyright (C) 2008-2010 Red Hat Inc. + * + * Arnaldo Carvalho de Melo <acme(a)redhat.com> + * David Sommerseth <davids(a)redhat.com> + * + * First bits from a Red Hat config tool by Harald Hoyer. + * + * This application is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2. + * + * This application is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <Python.h> + +#include <errno.h> +#include <stddef.h> +#include <stdint.h> +#include <unistd.h> +#include <sys/socket.h> +#include <net/if.h> +#include <sys/socket.h> +#include <sys/ioctl.h> +#include <sys/types.h> + +#include "etherinfo_struct.h" +#include "etherinfo_obj.h" +#include "etherinfo.h" + +static struct nl_handle *nlconnection = NULL; +extern PyTypeObject ethtool_etherinfoType; +extern PyTypeObject ethtool_etherinfoIPv6Type; + +#ifndef IFF_DYNAMIC +#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ +#endif + +typedef unsigned long long u64; +typedef __uint32_t u32; +typedef __uint16_t u16; +typedef __uint8_t u8; + +#include "ethtool-copy.h" +#include <linux/sockios.h> /* for SIOCETHTOOL */ + +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +#define _PATH_PROCNET_DEV "/proc/net/dev" + +static PyObject *get_active_devices(PyObject *self __unused, PyObject *args __unused) +{ + PyObject *list; + int numreqs = 30; + struct ifconf ifc; + struct ifreq *ifr; + int n; + + /* SIOCGIFCONF currently seems to only work properly on AF_INET sockets + (as of 2.1.128) */ + /* Open control socket. */ + int skfd = socket(AF_INET, SOCK_DGRAM, 0); + + if (skfd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + ifc.ifc_buf = NULL; + for (;;) { + ifc.ifc_len = sizeof(struct ifreq) * numreqs; + ifc.ifc_buf = realloc(ifc.ifc_buf, ifc.ifc_len); + + if (ioctl(skfd, SIOCGIFCONF, &ifc) < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + free(ifc.ifc_buf); + close(skfd); + return NULL; + } + + if (ifc.ifc_len == (int)sizeof(struct ifreq) * numreqs) { + /* assume it overflowed and try again */ + numreqs += 10; + continue; + } + break; + } + + list = PyList_New(0); + ifr = ifc.ifc_req; + for (n = 0; n < ifc.ifc_len; n += sizeof(struct ifreq)) { + if (!(ioctl(skfd, SIOCGIFFLAGS, ifr) < 0)) + if (ifr->ifr_flags & IFF_UP) + PyList_Append(list, PyString_FromString(ifr->ifr_name)); + ifr++; + } + + free(ifc.ifc_buf); + close(skfd); + + return list; +} + +static PyObject *get_devices(PyObject *self __unused, PyObject *args __unused) +{ + char buffer[256]; + char *ret;; + PyObject *list = PyList_New(0); + FILE *fd = fopen(_PATH_PROCNET_DEV, "r"); + + if (fd == NULL) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + /* skip over first two lines */ + ret = fgets(buffer, 256, fd); ret = fgets(buffer, 256, fd); + while (!feof(fd)) { + char *name = buffer; + char *end = buffer; + + if (fgets(buffer, 256, fd) == NULL) + break; + /* find colon */ + while (end && *end != ':') + end++; + *end = 0; /* terminate where colon was */ + while (*name == ' ') + name++; /* skip over leading whitespace if any */ + PyList_Append(list, PyString_FromString(name)); + } + fclose(fd); + return list; +} + +static PyObject *get_hwaddress(PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char hwaddr[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFHWADDR, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(hwaddr, "%02x:%02x:%02x:%02x:%02x:%02x", + (unsigned int)ifr.ifr_hwaddr.sa_data[0] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[1] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[2] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[3] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[4] % 256, + (unsigned int)ifr.ifr_hwaddr.sa_data[5] % 256); + + return PyString_FromString(hwaddr); +} + +static PyObject *get_ipaddress(PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char ipaddr[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFADDR, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(ipaddr, "%u.%u.%u.%u", + (unsigned int)ifr.ifr_addr.sa_data[2] % 256, + (unsigned int)ifr.ifr_addr.sa_data[3] % 256, + (unsigned int)ifr.ifr_addr.sa_data[4] % 256, + (unsigned int)ifr.ifr_addr.sa_data[5] % 256); + + return PyString_FromString(ipaddr); +} + + +/** + * Retrieves the current information about all interfaces. All interfaces will be + * returned as a list of objects per interface. + * + * @param self Not used + * @param args Python arguments + * + * @return Python list of objects on success, otherwise NULL. + */ +static PyObject *get_interfaces_info(PyObject *self __unused, PyObject *args) { + PyObject *devlist = NULL, *ethinf_py = NULL; + PyObject *inargs = NULL; + char **fetch_devs; + int i = 0, fetch_devs_len = 0; + + if (!PyArg_ParseTuple(args, "|O", &inargs)) { + PyErr_SetString(PyExc_LookupError, + "Argument must be either a string, list or a tuple"); + return NULL; + } + + /* Parse input arguments if we got them */ + if( inargs != NULL ) { + if( PyString_Check(inargs) ) { /* Input argument is just a string */ + fetch_devs_len = 1; + fetch_devs = calloc(1, sizeof(char *)); + fetch_devs[0] = PyString_AsString(inargs); + } else if( PyTuple_Check(inargs) ) { /* Input argument is a tuple list with devices */ + int j = 0; + + fetch_devs_len = PyTuple_Size(inargs); + fetch_devs = calloc(fetch_devs_len+1, sizeof(char *)); + for( i = 0; i < fetch_devs_len; i++ ) { + PyObject *elmt = PyTuple_GetItem(inargs, i); + if( elmt && PyString_Check(elmt) ) { + fetch_devs[j++] = PyString_AsString(elmt); + } + } + fetch_devs_len = j; + } else if( PyList_Check(inargs) ) { /* Input argument is a list with devices */ + int j = 0; + + fetch_devs_len = PyList_Size(inargs); + fetch_devs = calloc(fetch_devs_len+1, sizeof(char *)); + for( i = 0; i < fetch_devs_len; i++ ) { + PyObject *elmt = PyList_GetItem(inargs, i); + if( elmt && PyString_Check(elmt) ) { + fetch_devs[j++] = PyString_AsString(elmt); + } + } + fetch_devs_len = j; + } else { + PyErr_SetString(PyExc_LookupError, + "Argument must be either a string, list or a tuple"); + return NULL; + } + } + + devlist = PyList_New(0); + for( i = 0; i < fetch_devs_len; i++ ) { + struct etherinfo_obj_data *objdata = NULL; + + /* Allocate memory for data structures for each device */ + objdata = calloc(1, sizeof(struct etherinfo_obj_data)); + if( !objdata ) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + objdata->ethinfo = calloc(1, sizeof(struct etherinfo)); + if( !objdata->ethinfo ) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Store the device name and a reference to the NETLINK connection for + * objects to use when quering for device info + */ + objdata->ethinfo->device = strdup(fetch_devs[i]); + objdata->ethinfo->index = -1; + objdata->nlc = nlconnection; /* Global variable */ + + /* Instantiate a new etherinfo object with the device information */ + ethinf_py = PyCObject_FromVoidPtr(objdata, NULL); + if( ethinf_py ) { + /* Prepare the argument list for the object constructor */ + PyObject *args = PyTuple_New(1); + PyTuple_SetItem(args, 0, ethinf_py); + + /* Create the object */ + PyObject *dev = PyObject_CallObject((PyObject *)&ethtool_etherinfoType, args); + if( dev ) { + PyList_Append(devlist, dev); + } + } + } + if( fetch_devs_len > 0 ) { + free(fetch_devs); + } + + return devlist; +} + + +static PyObject *get_flags (PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + char *devname; + int fd, err; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + err = ioctl(fd, SIOCGIFFLAGS, &ifr); + if(err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + return Py_BuildValue("h", ifr.ifr_flags); + + +} +static PyObject *get_netmask (PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char netmask[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFNETMASK, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(netmask, "%u.%u.%u.%u", + (unsigned int)ifr.ifr_netmask.sa_data[2] % 256, + (unsigned int)ifr.ifr_netmask.sa_data[3] % 256, + (unsigned int)ifr.ifr_netmask.sa_data[4] % 256, + (unsigned int)ifr.ifr_netmask.sa_data[5] % 256); + + return PyString_FromString(netmask); +} + +static PyObject *get_broadcast(PyObject *self __unused, PyObject *args) +{ + struct ifreq ifr; + int fd, err; + char *devname; + char broadcast[20]; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our request structure. */ + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCGIFBRDADDR, &ifr); + if (err < 0) { + char buf[2048]; + int eno = errno; + snprintf(buf, sizeof(buf), "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + close(fd); + return NULL; + } + + close(fd); + + sprintf(broadcast, "%u.%u.%u.%u", + (unsigned int)ifr.ifr_broadaddr.sa_data[2] % 256, + (unsigned int)ifr.ifr_broadaddr.sa_data[3] % 256, + (unsigned int)ifr.ifr_broadaddr.sa_data[4] % 256, + (unsigned int)ifr.ifr_broadaddr.sa_data[5] % 256); + + return PyString_FromString(broadcast); +} + +static PyObject *get_module(PyObject *self __unused, PyObject *args) +{ + struct ethtool_cmd ecmd; + struct ifreq ifr; + int fd, err; + char buf[2048]; + char *devname; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our control structures. */ + memset(&ecmd, 0, sizeof(ecmd)); + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + ifr.ifr_data = (caddr_t) &buf; + ecmd.cmd = ETHTOOL_GDRVINFO; + memcpy(&buf, &ecmd, sizeof(ecmd)); + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCETHTOOL, &ifr); + + if (err < 0) { /* failed? */ + int eno = errno; + FILE *file; + int found = 0; + char driver[100], dev[100]; + close(fd); + + /* Before bailing, maybe it is a PCMCIA/PC Card? */ + file = fopen("/var/lib/pcmcia/stab", "r"); + if (file == NULL) { + sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + return NULL; + } + + while (!feof(file)) { + if (fgets(buf, 2048, file) == NULL) + break; + buf[2047] = '\0'; + if (strncmp(buf, "Socket", 6) != 0) { + if (sscanf(buf, "%*d\t%*s\t%100s\t%*d\t%100s\n", driver, dev) > 0) { + driver[99] = '\0'; + dev[99] = '\0'; + if (strcmp(devname, dev) == 0) { + found = 1; + break; + } + } + } + } + fclose(file); + if (!found) { + sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + return NULL; + } else + return PyString_FromString(driver); + } + + close(fd); + return PyString_FromString(((struct ethtool_drvinfo *)buf)->driver); +} + +static PyObject *get_businfo(PyObject *self __unused, PyObject *args) +{ + struct ethtool_cmd ecmd; + struct ifreq ifr; + int fd, err; + char buf[1024]; + char *devname; + + if (!PyArg_ParseTuple(args, "s", &devname)) + return NULL; + + /* Setup our control structures. */ + memset(&ecmd, 0, sizeof(ecmd)); + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + ifr.ifr_data = (caddr_t) &buf; + ecmd.cmd = ETHTOOL_GDRVINFO; + memcpy(&buf, &ecmd, sizeof(ecmd)); + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return NULL; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCETHTOOL, &ifr); + + if (err < 0) { /* failed? */ + int eno = errno; + close(fd); + + sprintf(buf, "[Errno %d] %s", eno, strerror(eno)); + PyErr_SetString(PyExc_IOError, buf); + return NULL; + } + + close(fd); + return PyString_FromString(((struct ethtool_drvinfo *)buf)->bus_info); +} + +static int send_command(int cmd, char *devname, void *value) +{ + /* Setup our request structure. */ + int fd, err; + struct ifreq ifr; + struct ethtool_value *eval = value; + + memset(&ifr, 0, sizeof(ifr)); + strncpy(&ifr.ifr_name[0], devname, IFNAMSIZ); + ifr.ifr_name[IFNAMSIZ - 1] = 0; + ifr.ifr_data = (caddr_t)eval; + eval->cmd = cmd; + + /* Open control socket. */ + fd = socket(AF_INET, SOCK_DGRAM, 0), err; + if (fd < 0) { + PyErr_SetString(PyExc_OSError, strerror(errno)); + return -1; + } + + /* Get current settings. */ + err = ioctl(fd, SIOCETHTOOL, &ifr); + if (err < 0) { + char buf[2048]; + sprintf(buf, "[Errno %d] %s", errno, strerror(errno)); + PyErr_SetString(PyExc_IOError, buf); + } + + close(fd); + return err; +} + +static int get_dev_value(int cmd, PyObject *args, void *value) +{ + char *devname; + int err = -1; + + if (PyArg_ParseTuple(args, "s", &devname)) + err = send_command(cmd, devname, value); + + return err; +} + +static int get_dev_int_value(int cmd, PyObject *args, int *value) +{ + struct ethtool_value eval; + int rc = get_dev_value(cmd, args, &eval); + + if (rc == 0) + *value = *(int *)&eval.data; + + return rc; +} + +static int dev_set_int_value(int cmd, PyObject *args) +{ + struct ethtool_value eval; + char *devname; + + if (!PyArg_ParseTuple(args, "si", &devname, &eval.data)) + return -1; + + return send_command(cmd, devname, &eval); +} + +static PyObject *get_tso(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GTSO, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +static PyObject *set_tso(PyObject *self __unused, PyObject *args) +{ + if (dev_set_int_value(ETHTOOL_STSO, args) < 0) + return NULL; + + Py_INCREF(Py_None); + return Py_None; +} + +static PyObject *get_ufo(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GUFO, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +static PyObject *get_gso(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GGSO, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +static PyObject *get_sg(PyObject *self __unused, PyObject *args) +{ + int value = 0; + + if (get_dev_int_value(ETHTOOL_GSG, args, &value) < 0) + return NULL; + + return Py_BuildValue("b", value); +} + +struct struct_desc { + char *name; + unsigned short offset; + unsigned short size; +}; + +#define member_desc(type, member_name) { \ + .name = #member_name, \ + .offset = offsetof(type, member_name), \ + .size = sizeof(((type *)0)->member_name), } + +struct struct_desc ethtool_coalesce_desc[] = { + member_desc(struct ethtool_coalesce, rx_coalesce_usecs), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames), + member_desc(struct ethtool_coalesce, rx_coalesce_usecs_irq), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_irq), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs_irq), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_irq), + member_desc(struct ethtool_coalesce, stats_block_coalesce_usecs), + member_desc(struct ethtool_coalesce, use_adaptive_rx_coalesce), + member_desc(struct ethtool_coalesce, use_adaptive_tx_coalesce), + member_desc(struct ethtool_coalesce, pkt_rate_low), + member_desc(struct ethtool_coalesce, rx_coalesce_usecs_low), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_low), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs_low), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_low), + member_desc(struct ethtool_coalesce, pkt_rate_high), + member_desc(struct ethtool_coalesce, rx_coalesce_usecs_high), + member_desc(struct ethtool_coalesce, rx_max_coalesced_frames_high), + member_desc(struct ethtool_coalesce, tx_coalesce_usecs_high), + member_desc(struct ethtool_coalesce, tx_max_coalesced_frames_high), + member_desc(struct ethtool_coalesce, rate_sample_interval), +}; + +static PyObject *__struct_desc_create_dict(struct struct_desc *table, + int nr_entries, void *values) +{ + int i; + PyObject *dict = PyDict_New(); + + if (dict == NULL) + goto out; + + for (i = 0; i < nr_entries; ++i) { + struct struct_desc *d = &table[i]; + PyObject *objval = NULL; + void *val = values + d->offset; + + switch (d->size) { + case sizeof(uint32_t): + objval = PyInt_FromLong(*(uint32_t *)val); + break; + } + + if (objval == NULL) + goto free_dict; + + if (PyDict_SetItemString(dict, d->name, objval) != 0) { + Py_DECREF(objval); + goto free_dict; + } + + Py_DECREF(objval); + } +out: + return dict; +free_dict: + goto out; + dict = NULL; +} + +#define struct_desc_create_dict(table, values) \ + __struct_desc_create_dict(table, ARRAY_SIZE(table), values) + +static int __struct_desc_from_dict(struct struct_desc *table, + int nr_entries, void *to, PyObject *dict) +{ + char buf[2048]; + int i; + + for (i = 0; i < nr_entries; ++i) { + struct struct_desc *d = &table[i]; + void *val = to + d->offset; + PyObject *obj; + + switch (d->size) { + case sizeof(uint32_t): + obj = PyDict_GetItemString(dict, d->name); + if (obj == NULL) { + snprintf(buf, sizeof(buf), + "Missing dict entry for field %s", + d->name); + PyErr_SetString(PyExc_IOError, buf); + return -1; + } + *(uint32_t *)val = PyInt_AsLong(obj); + break; + default: + snprintf(buf, sizeof(buf), + "Invalid type size %d for field %s", + d->size, d->name); + PyErr_SetString(PyExc_IOError, buf); + return -1; + } + } + + return 0; +} + +#define struct_desc_from_dict(table, to, dict) \ + __struct_desc_from_dict(table, ARRAY_SIZE(table), to, dict) + +static PyObject *get_coalesce(PyObject *self __unused, PyObject *args) +{ + struct ethtool_coalesce coal; + + if (get_dev_value(ETHTOOL_GCOALESCE, args, &coal) < 0) + return NULL; + + return struct_desc_create_dict(ethtool_coalesce_desc, &coal); +} + +static PyObject *set_coalesce(PyObject *self __unused, PyObject *args) +{ + struct ethtool_coalesce coal; + char *devname; + PyObject *dict; + + if (!PyArg_ParseTuple(args, "sO", &devname, &dict)) + return NULL; + + if (struct_desc_from_dict(ethtool_coalesce_desc, &coal, dict) != 0) + return NULL; + + if (send_command(ETHTOOL_SCOALESCE, devname, &coal)) + return NULL; + + Py_INCREF(Py_None); + return Py_None; +} + +struct struct_desc ethtool_ringparam_desc[] = { + member_desc(struct ethtool_ringparam, rx_max_pending), + member_desc(struct ethtool_ringparam, rx_mini_max_pending), + member_desc(struct ethtool_ringparam, rx_jumbo_max_pending), + member_desc(struct ethtool_ringparam, tx_max_pending), + member_desc(struct ethtool_ringparam, rx_pending), + member_desc(struct ethtool_ringparam, rx_mini_pending), + member_desc(struct ethtool_ringparam, rx_jumbo_pending), + member_desc(struct ethtool_ringparam, tx_pending), +}; + +static PyObject *get_ringparam(PyObject *self __unused, PyObject *args) +{ + struct ethtool_ringparam ring; + + if (get_dev_value(ETHTOOL_GRINGPARAM, args, &ring) < 0) + return NULL; + + return struct_desc_create_dict(ethtool_ringparam_desc, &ring); +} + +static PyObject *set_ringparam(PyObject *self __unused, PyObject *args) +{ + struct ethtool_ringparam ring; + char *devname; + PyObject *dict; + + if (!PyArg_ParseTuple(args, "sO", &devname, &dict)) + return NULL; + + if (struct_desc_from_dict(ethtool_ringparam_desc, &ring, dict) != 0) + return NULL; + + if (send_command(ETHTOOL_SRINGPARAM, devname, &ring)) + return NULL; + + Py_INCREF(Py_None); + return Py_None; +} + +static struct PyMethodDef PyEthModuleMethods[] = { + { + .ml_name = "get_module", + .ml_meth = (PyCFunction)get_module, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_businfo", + .ml_meth = (PyCFunction)get_businfo, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_hwaddr", + .ml_meth = (PyCFunction)get_hwaddress, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_ipaddr", + .ml_meth = (PyCFunction)get_ipaddress, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_interfaces_info", + .ml_meth = (PyCFunction)get_interfaces_info, + .ml_flags = METH_VARARGS, + .ml_doc = "Accepts a string, list or tupples of interface names. " + "Returns a list of ethtool.etherinfo objets with device information." + }, + { + .ml_name = "get_netmask", + .ml_meth = (PyCFunction)get_netmask, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_broadcast", + .ml_meth = (PyCFunction)get_broadcast, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_coalesce", + .ml_meth = (PyCFunction)get_coalesce, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "set_coalesce", + .ml_meth = (PyCFunction)set_coalesce, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_devices", + .ml_meth = (PyCFunction)get_devices, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_active_devices", + .ml_meth = (PyCFunction)get_active_devices, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_ringparam", + .ml_meth = (PyCFunction)get_ringparam, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "set_ringparam", + .ml_meth = (PyCFunction)set_ringparam, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_tso", + .ml_meth = (PyCFunction)get_tso, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "set_tso", + .ml_meth = (PyCFunction)set_tso, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_ufo", + .ml_meth = (PyCFunction)get_ufo, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_gso", + .ml_meth = (PyCFunction)get_gso, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_sg", + .ml_meth = (PyCFunction)get_sg, + .ml_flags = METH_VARARGS, + }, + { + .ml_name = "get_flags", + .ml_meth = (PyCFunction)get_flags, + .ml_flags = METH_VARARGS, + }, + { .ml_name = NULL, }, +}; + + +/** + * Connects to the NETLINK interface. This should only be + * called once as part of the main ethtool module init. + * + * @param nlc Structure which keeps the NETLINK connection handle (struct nl_handle) + * + * @return Returns 1 on success, otherwise 0. + */ +int open_netlink(struct nl_handle **nlc) +{ + if( *nlc ) { + return 0; + } + + *nlc = nl_handle_alloc(); + nl_connect(*nlc, NETLINK_ROUTE); + return (*nlc != NULL); +} + + +/** + * Closes the NETLINK connection. This should be called automatically whenever + * the ethtool module is unloaded from Python. + * + * @param ptr Pointer to the pointer of struct nl_handle, which contains the NETLINK connection + */ +void close_netlink(void **ptr) +{ + struct nl_handle *nlc; + + if( !ptr && !*ptr ) { + return; + } + + nlc = (struct nl_handle *) *ptr; + if( !nlc ) { + return; + } + + /* Close NETLINK connection */ + nl_close(nlc); + nl_handle_destroy(nlc); + *ptr = NULL; /* reset the pointers pointer address */ +} + + +PyMODINIT_FUNC initethtool(void) +{ + PyObject *m; + m = Py_InitModule3("ethtool", PyEthModuleMethods, "Python ethtool module"); + + // Prepare the ethtool.etherinfo class + if (PyType_Ready(&ethtool_etherinfoType) < 0) + return; + Py_INCREF(&ethtool_etherinfoType); + PyModule_AddObject(m, "etherinfo", (PyObject *)&ethtool_etherinfoType); + + // Prepare the ethtool.etherinfo_ipv6addr class + if (PyType_Ready(&ethtool_etherinfoIPv6Type) < 0) + return; + Py_INCREF(&ethtool_etherinfoIPv6Type); + PyModule_AddObject(m, "etherinfo_ipv6addr", (PyObject *)&ethtool_etherinfoIPv6Type); + + // Prepare an internal netlink connection object + if( open_netlink(&nlconnection) ) { + PyModule_AddObject(m, "__nlconnection", + PyCObject_FromVoidPtr(&nlconnection, close_netlink)); + } + + // Setup constants + PyModule_AddIntConstant(m, "IFF_UP", IFF_UP); /* Interface is up. */ + PyModule_AddIntConstant(m, "IFF_BROADCAST", IFF_BROADCAST); /* Broadcast address valid. */ + PyModule_AddIntConstant(m, "IFF_DEBUG", IFF_DEBUG); /* Turn on debugging. */ + PyModule_AddIntConstant(m, "IFF_LOOPBACK", IFF_LOOPBACK); /* Is a loopback net */ + PyModule_AddIntConstant(m, "IFF_POINTOPOINT", IFF_POINTOPOINT); /* Is a point-to-point link */ + PyModule_AddIntConstant(m, "IFF_NOTRAILERS", IFF_NOTRAILERS); /* Avoid use of trailers */ + PyModule_AddIntConstant(m, "IFF_RUNNING", IFF_RUNNING); /* Resources allocated */ + PyModule_AddIntConstant(m, "IFF_NOARP", IFF_NOARP); /* No address resolution protocol. */ + PyModule_AddIntConstant(m, "IFF_PROMISC", IFF_PROMISC); /* Receive all packets. */ + PyModule_AddIntConstant(m, "IFF_ALLMULTI", IFF_ALLMULTI); /* Receive all multicast packets. */ + PyModule_AddIntConstant(m, "IFF_MASTER", IFF_MASTER); /* Master of a load balancer. */ + PyModule_AddIntConstant(m, "IFF_SLAVE", IFF_SLAVE); /* Slave of a load balancer. */ + PyModule_AddIntConstant(m, "IFF_MULTICAST", IFF_MULTICAST); /* Supports multicast. */ + PyModule_AddIntConstant(m, "IFF_PORTSEL", IFF_PORTSEL); /* Can set media type. */ + PyModule_AddIntConstant(m, "IFF_AUTOMEDIA", IFF_AUTOMEDIA); /* Auto media select active. */ + PyModule_AddIntConstant(m, "IFF_DYNAMIC", IFF_DYNAMIC); /* Dialup device with changing addresses. */ + PyModule_AddIntConstant(m, "AF_INET", AF_INET); /* IPv4 interface */ + PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); /* IPv6 interface */ +} + diff --git a/spec-tree/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec b/spec-tree/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec new file mode 100644 index 0000000..76a4dfe --- /dev/null +++ b/spec-tree/python-ethtool-0.5/rpm/SPECS/python-ethtool.spec @@ -0,0 +1,76 @@ +%{!?python_sitearch: %define python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")} +%{!?python_ver: %define python_ver %(%{__python} -c "import sys ; print sys.version[:3]")} + +Summary: Ethernet settings python bindings +Name: python-ethtool +Version: 0.5 +Release: 1%{?dist} +URL: http://fedorapeople.org/gitweb?p=dsommers/public_git/python-ethtool.git;a=s… +Source: http://dsommers.fedorapeople.org/python-ethtool/%{name}-%{version}.tar.bz2 +License: GPLv2 +Group: System Environment/Libraries +BuildRequires: python-devel libnl-devel +BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) + +%description +Python bindings for the ethtool kernel interface, that allows querying and +changing of Ethernet card settings, such as speed, port, auto-negotiation, and +PCI locations. + +%prep +%setup -q + +%build +%{__python} setup.py build + +%install +rm -rf %{buildroot} +%{__python} setup.py install --skip-build --root %{buildroot} +mkdir -p %{buildroot}%{_sbindir} +cp -p pethtool.py %{buildroot}%{_sbindir}/pethtool +cp -p pifconfig.py %{buildroot}%{_sbindir}/pifconfig + +%clean +rm -rf %{buildroot} + +%files +%defattr(-,root,root) +%doc COPYING +%{_sbindir}/pethtool +%{_sbindir}/pifconfig +%{python_sitearch}/ethtool.so +%if "%{python_ver}" >= "2.5" +%{python_sitearch}/*.egg-info +%endif + +%changelog +* Mon Aug 9 2010 David Sommerseth <davids(a)redhat.com> - 0.5-1 +- Fixed double free issue (commit c52ed2cbdc5b851ebc7b) + +* Wed Apr 28 2010 David Sommerseth <davids(a)redhat.com> - 0.4-1 +- David Sommerseth is now taking over the maintenance of python-ethtool +- New URLs for upstream source code +- Added new API: ethtool.get_interfaces_info() - returns list of etherinfo objects +- Added support retrieving for IPv6 address, using etherinfo::get_ipv6_addresses() + +* Fri Sep 5 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.3-2 +- Rewrote build and install sections as part of the fedora review process + BZ #459549 + +* Tue Aug 26 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.3-1 +- Add get_flags method from the first python-ethtool contributor, yay +- Add pifconfig command, that mimics the ifconfig tool using the + bindings available + +* Wed Aug 20 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.2-1 +- Expand description and summary fields, as part of the fedora + review process. + +* Tue Jun 10 2008 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-3 +- add dist to the release tag + +* Tue Dec 18 2007 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-2 +- First build into MRG repo + +* Tue Dec 18 2007 Arnaldo Carvalho de Melo <acme(a)redhat.com> - 0.1-1 +- Get ethtool code from rhpl 0.212 diff --git a/spec-tree/python-ethtool-0.5/setup.py b/spec-tree/python-ethtool-0.5/setup.py new file mode 100644 index 0000000..71b8c70 --- /dev/null +++ b/spec-tree/python-ethtool-0.5/setup.py @@ -0,0 +1,69 @@ +#!/usr/bin/python2 + +from distutils.core import setup, Extension +import commands + +ethtool = Extension('ethtool', + sources = ['python-ethtool/ethtool.c', + 'python-ethtool/etherinfo.c', 'python-ethtool/etherinfo_obj.c']) + +def pkgconfig(pkg): + def _str2list(pkgstr, onlystr): + res = [] + for l in pkgstr.split(" "): + if l.find(onlystr) == 0: + res.append(l.replace(onlystr, "", 1)) + return res + + (res, cflags) = commands.getstatusoutput('pkg-config --cflags-only-other %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --cflags-only-other %s' % pkg + sys.exit(1) + + (res, includes) = commands.getstatusoutput('pkg-config --cflags-only-I %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --cflags-only-I %s' % pkg + sys.exit(1) + + (res, libs) = commands.getstatusoutput('pkg-config --libs-only-l %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --libs-only-l %s' % pkg + sys.exit(1) + + (res, libdirs) = commands.getstatusoutput('pkg-config --libs-only-L %s' % pkg) + if res != 0: + print 'Failed to query pkg-config --libs-only-L %s' % pkg + sys.exit(1) + + + # Clean up the results and return what we've extracted from pkg-config + return {'cflags': cflags, + 'include': _str2list(includes, '-I'), + 'libs': _str2list(libs, '-l'), + 'libdirs': _str2list(libdirs, '-L') + } + + +libnl = pkgconfig('libnl-1') + +# don't reformat this line, Makefile parses it +setup(name='ethtool', + version='0.2', + description='Python module to interface with ethtool', + author='Harald Hoyer & Arnaldo Carvalho de Melo', + author_email='acme(a)redhat.com', + url='http://fedoraproject.org/wiki/python-ethtool', + ext_modules=[ + Extension( + 'ethtool', + sources = [ + 'python-ethtool/ethtool.c', + 'python-ethtool/etherinfo.c', + 'python-ethtool/etherinfo_obj.c', + 'python-ethtool/etherinfo_ipv6_obj.c'], + include_dirs = libnl['include'], + library_dirs = libnl['libdirs'], + libraries = libnl['libs'] + ) + ] +) commit f1afa2871a326edb8ac62f8a9cb0ff7a04e10f55 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Mon Oct 18 22:09:40 2010 +0200 add manual how to build debian packages diff --git a/DEBIAN-HOWTO b/DEBIAN-HOWTO new file mode 100644 index 0000000..0a94e7d --- /dev/null +++ b/DEBIAN-HOWTO @@ -0,0 +1,17 @@ +HOW TO BUILD DEBIAN PACKAGES + +python-rhnlib in client/rhel/rhnlib +----------------------------------- +git checkout master +cd rhnlib +tito build --tgz +copy rhnlib-2.5.27.tar.gz /tmp/python-rhnlib_2.5.27.orig.tar.gz +git checkout debian +cp -a rhnlib /tmp/python-rhnlib-2.5.27 +cd /tmp/python-rhnlib-2.5.27 +debuild -i -S +# and if you have configured dupload properly, then: +dupload -t mentors python-rhnlib_2.5.27-1_source.changes + +Similary for other packages. + commit 39502f523d4d8240566b17b9a4893d3696e369d9 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Mon Oct 18 21:58:08 2010 +0200 add debian control files for python-rhnlib diff --git a/client/rhel/rhnlib/debian/changelog b/client/rhel/rhnlib/debian/changelog new file mode 100644 index 0000000..2ae6b7b --- /dev/null +++ b/client/rhel/rhnlib/debian/changelog @@ -0,0 +1,6 @@ +python-rhnlib (2.5.27-1) unstable; urgency=low + + * Initial release (Closes: #597490) Package was created. + + -- Miroslav Suchý <miroslav(a)suchy.cz> Mon, 20 Sep 2010 10:38:44 +0200 + diff --git a/client/rhel/rhnlib/debian/compat b/client/rhel/rhnlib/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/client/rhel/rhnlib/debian/compat @@ -0,0 +1 @@ +7 diff --git a/client/rhel/rhnlib/debian/control b/client/rhel/rhnlib/debian/control new file mode 100644 index 0000000..26e5a62 --- /dev/null +++ b/client/rhel/rhnlib/debian/control @@ -0,0 +1,18 @@ +Source: python-rhnlib +Section: python +Priority: extra +Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> +Build-Depends: python, debhelper (>= 7.0.50~) +Build-Depends-Indep: python-support (>= 0.8) +Standards-Version: 3.9.1 +Homepage: https://fedorahosted.org/spacewalk + +Package: python-rhnlib +Architecture: all +Depends: ${python:Depends}, ${misc:Depends}, python-openssl +Provides: ${python:Provides} +Description: Collection of Python modules used by the Spacewalk software + Collection of base Python modules used by the Red Hat Network + (http://rhn.redhat.com) and Spacewalk software. + This is common library used by both clients and server. + diff --git a/client/rhel/rhnlib/debian/copyright b/client/rhel/rhnlib/debian/copyright new file mode 100644 index 0000000..52c8c06 --- /dev/null +++ b/client/rhel/rhnlib/debian/copyright @@ -0,0 +1,21 @@ +Rhnlib is copyright 2010 by Red Hat Inc. +Rhnlib is currently developed by Spacewalk Development Team <spacewalk-devel(a)redhat.com>. + +License: GPLv2 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + +See /usr/share/common-licenses/GPL-2, or +<http://www.gnu.org/copyleft/gpl.txt> for the terms of the latest version +of the GNU General Public License. diff --git a/client/rhel/rhnlib/debian/docs b/client/rhel/rhnlib/debian/docs new file mode 100644 index 0000000..70cfe37 --- /dev/null +++ b/client/rhel/rhnlib/debian/docs @@ -0,0 +1,4 @@ +ChangeLog +copyright +README +TODO diff --git a/client/rhel/rhnlib/debian/pycompat b/client/rhel/rhnlib/debian/pycompat new file mode 100644 index 0000000..0cfbf08 --- /dev/null +++ b/client/rhel/rhnlib/debian/pycompat @@ -0,0 +1 @@ +2 diff --git a/client/rhel/rhnlib/debian/python-rhnlib.dsc b/client/rhel/rhnlib/debian/python-rhnlib.dsc new file mode 100644 index 0000000..217c99a --- /dev/null +++ b/client/rhel/rhnlib/debian/python-rhnlib.dsc @@ -0,0 +1,15 @@ +Format: 1.0 +Source: python-rhnlib +Binary: python-rhnlib +Architecture: all +Version: 2.5.27-1 +Maintainer: Miroslav Suchý <miroslav(a)suchy.cz> +Homepage: https://fedorahosted.org/spacewalk/ +Standards-Version: 3.7.3 +Build-Depends: python-all-dev, python-support (>= 0.8), debhelper (>= 7) +Checksums-Sha1: + 444fe0994b77e6a9cc8a006fd1bcb003115c9091 51389 rhnlib-2.5.27.tar.gz +Checksums-Sha256: + 31394cab7c60f25707c704ff2a1a722e335626ae20fc165db61d20b6be856291 51389 rhnlib-2.5.27.tar.gz +Files: + 3b5541a03a0690b26a2691d44076fa81 rhnlib-2.5.27.tar.gz diff --git a/client/rhel/rhnlib/debian/rules b/client/rhel/rhnlib/debian/rules new file mode 100755 index 0000000..d581922 --- /dev/null +++ b/client/rhel/rhnlib/debian/rules @@ -0,0 +1,25 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + +override_dh_auto_build: + if [ ! -e setup.py ]; then sed -e "s/\@VERSION\@/$(shell dpkg-parsechangelog | grep Version: | cut -f2 -d' ' | cut -f1 -d- )/" -e 's/\@NAME\@/rhnlib/' setup.py.in > setup.py; fi + if [ ! -e setup.cfg ]; then sed 's/\@RELEASE\@/$(shell dpkg-parsechangelog | grep Version: | cut -f2 -d' ' | cut -f2 -d- )/' setup.cfg.in > setup.cfg; fi + dh_auto_configure --buildsystem=python_distutils + +clean: + if [ -f setup.py ]; then dh --buildsystem=python_distutils $@; fi + rm -f setup.py setup.cfg + rm -rf build + +%: + dh --buildsystem=python_distutils $@ + diff --git a/client/rhel/rhnlib/debian/source/format b/client/rhel/rhnlib/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/client/rhel/rhnlib/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/client/rhel/rhnlib/debian/watch b/client/rhel/rhnlib/debian/watch new file mode 100644 index 0000000..c76ceee --- /dev/null +++ b/client/rhel/rhnlib/debian/watch @@ -0,0 +1,2 @@ +version=3 +https://fedorahosted.org/releases/s/p/spacewalk/rhnlib-(.*)\.tar\.gz

1 0

java/code
by Tomas Lestach 15 Feb '11

15 Feb '11

java/code/src/com/redhat/rhn/frontend/xmlrpc/activationkey/ActivationKeyHandler.java | 13 ++++------ 1 file changed, 6 insertions(+), 7 deletions(-) New commits: commit cd3c2fa252522b64b44f622dd31206a78b158ffe Author: Tomas Lestach <tlestach(a)redhat.com> Date: Tue Feb 15 12:15:50 2011 +0100 669167 - add apidoc for activationkey.setDetails parameters diff --git a/java/code/src/com/redhat/rhn/frontend/xmlrpc/activationkey/ActivationKeyHandler.java b/java/code/src/com/redhat/rhn/frontend/xmlrpc/activationkey/ActivationKeyHandler.java index 6b13085..858d4b6 100644 --- a/java/code/src/com/redhat/rhn/frontend/xmlrpc/activationkey/ActivationKeyHandler.java +++ b/java/code/src/com/redhat/rhn/frontend/xmlrpc/activationkey/ActivationKeyHandler.java @@ -276,13 +276,12 @@ public class ActivationKeyHandler extends BaseHandler { * @xmlrpc.param #param("string", "sessionKey") * @xmlrpc.param #param("string", "key") * @xmlrpc.param #struct("activation key") - * #prop("string", "description") - * #prop("string", "base_channel_label") - * #prop("int", "usage_limit") - * #prop("boolean", "unlimited_usage_limit", "If set to true, - * usage_limit will be ignored and the key will receive - * unlimited usage.") - * #prop("boolean", "universal_default") + * #prop_desc("string", "description", "optional") + * #prop_desc("string", "base_channel_label", "optional") + * #prop_desc("int", "usage_limit", "optional") + * #prop_desc("boolean", "unlimited_usage_limit", "Set true + * for unlimited usage and to override usage_limit") + * #prop_desc("boolean", "universal_default", "optional") * #struct_end() * @xmlrpc.returntype #return_int_success() */

1 0

web/modules
by Jan Pazdziora 15 Feb '11

15 Feb '11

web/modules/rhn/RHN/DB/Server.pm | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) New commits: commit 4b6551aceb91d3483116f8f826b14206c1b38076 Author: Jan Pazdziora <jpazdziora(a)redhat.com> Date: Tue Feb 15 16:38:23 2011 +0100 server_event_config_deploy just called server_event_config_revisions without adding any value, removing. diff --git a/web/modules/rhn/RHN/DB/Server.pm b/web/modules/rhn/RHN/DB/Server.pm index 3c7fb89..115e1c5 100644 --- a/web/modules/rhn/RHN/DB/Server.pm +++ b/web/modules/rhn/RHN/DB/Server.pm @@ -1230,11 +1230,6 @@ sub server_event_config_diff { } -sub server_event_config_deploy { - my $class = shift; - return $class->server_event_config_revisions(@_); -} - sub server_event_details { my $class = shift; my $sid = shift; @@ -1275,7 +1270,7 @@ EOS return ($label, $class->server_event_config_upload($sid, $aid, $label)); } elsif ($label eq 'configfiles.deploy') { - return ($label, $class->server_event_config_deploy($sid, $aid, $label)); + return ($label, $class->server_event_config_revisions($sid, $aid, $label)); } elsif ($label eq 'configfiles.diff') { return ($label, $class->server_event_config_diff($sid, $aid, $label));

1 0

Changes to 'refs/tags/rhncfg-5.9.49-1'
by Miroslav Suchý 15 Feb '11

15 Feb '11

Tag 'rhncfg-5.9.49-1' created by Miroslav Suchý <msuchy(a)redhat.com> at 2011-02-15 12:47 +0000 Tagging package [rhncfg] version [5.9.49-1] in directory [client/tools/rhncfg/]. Changes since yum-rhn-plugin-1.4.1-1: Jan Blazek (1): added python-ethtool Jan Pazdziora (4): We no longer build or ship rhn-kickstart, we shall pretend it never existed. Extend the copyright year to 2011. The LOGGED IN and SIGN OUT are not images since Satellite 5.0 (rhn-360.css), removing. Make the index on rhnActionErrataUpdate (action_id, errata_id) unique. Milan Zazrivec (1): repopulate package sack after initial setup Miroslav Suchý (2): 675164 - do not traceback if file do not differ Automatic commit of package [rhncfg] release [5.9.49-1]. Tomas Lestach (2): removing python-ethtool from rhel5 client comps removing unused fedora12 comps ypoyarko (2): l10n: Updates to Russian (ru) translation l10n: Updates to Russian (ru) translation --- client/rhel/rhn-client-tools/po/ru.po | 96 +-- client/rhel/yum-rhn-plugin/actions/packages.py | 1 client/rhel/yum-rhn-plugin/po/ru.po | 32 - client/tools/rhncfg/config_client/rhncfgcli_verify.py | 2 client/tools/rhncfg/rhncfg.spec | 12 dev/null |binary java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_bn_IN.xml | 2 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_de.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_en_US.xml | 2 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_es.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_fr.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_gu.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_hi.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_it.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_ja.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_ko.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_pa.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_pt_BR.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_ru.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_ta.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_zh_CN.xml | 4 java/code/src/com/redhat/rhn/frontend/strings/jsp/StringResource_zh_TW.xml | 4 rel-eng/comps/comps-spacewalk-client-fedora12.xml | 42 - rel-eng/comps/comps-spacewalk-client-rhel5.xml | 1 rel-eng/comps/comps-spacewalk-client-rhel6.xml | 1 rel-eng/comps/comps-spacewalk-server-fedora12.xml | 260 ---------- rel-eng/packages/rhn-kickstart | 1 rel-eng/packages/rhncfg | 2 schema/spacewalk/common/tables/rhnActionErrataUpdate.sql | 4 schema/spacewalk/upgrade/spacewalk-schema-1.3-to-spacewalk-schema-1.4/002-rhnActionErrataUpdate-unique.sql | 4 30 files changed, 99 insertions(+), 419 deletions(-) ---

1 0

Branch 'refs/tags/rhn-client-tools-1.4.1-1' - 0 commits -
by Miroslav Suchý 15 Feb '11

15 Feb '11

0 files changed New commits:

1 0

2 commits - client/tools rel-eng/packages
by Miroslav Suchý 15 Feb '11

15 Feb '11

client/tools/rhncfg/config_client/rhncfgcli_verify.py | 2 +- client/tools/rhncfg/rhncfg.spec | 12 +++++++++++- rel-eng/packages/rhncfg | 2 +- 3 files changed, 13 insertions(+), 3 deletions(-) New commits: commit d5997ea34d202a0de369d63fa673e9d613f90b78 Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 13:47:51 2011 +0100 Automatic commit of package [rhncfg] release [5.9.49-1]. diff --git a/client/tools/rhncfg/rhncfg.spec b/client/tools/rhncfg/rhncfg.spec index 008c9fb..3c6dd0a 100644 --- a/client/tools/rhncfg/rhncfg.spec +++ b/client/tools/rhncfg/rhncfg.spec @@ -8,7 +8,7 @@ Group: Applications/System License: GPLv2 and Python URL: https://fedorahosted.org/spacewalk Source0: https://fedorahosted.org/releases/s/p/spacewalk/%{name}-%{version}.tar.gz -Version: 5.9.48 +Version: 5.9.49 Release: 1%{?dist} BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildArch: noarch @@ -100,6 +100,16 @@ rm -rf $RPM_BUILD_ROOT # $Id$ %changelog +* Tue Feb 15 2011 Miroslav Suchý <msuchy(a)redhat.com> 5.9.49-1 +- 675164 - do not traceback if file do not differ (msuchy(a)redhat.com) +- 676317 - handle fs objects without selinux context correctly + (mzazrivec(a)redhat.com) +- 628920 - older Satellites do not send selinux_ctx (msuchy(a)redhat.com) +- 675164 - do not traceback if file do not differ (msuchy(a)redhat.com) +- Revert "Revert "get_server_capability() is defined twice in osad and rhncfg, + merge and move to rhnlib and make it member of rpclib.Server"" + (msuchy(a)redhat.com) + * Tue Feb 01 2011 Tomas Lestach <tlestach(a)redhat.com> 5.9.48-1 - Revert "get_server_capability() is defined twice in osad and rhncfg, merge and move to rhnlib and make it member of rpclib.Server" (tlestach(a)redhat.com) diff --git a/rel-eng/packages/rhncfg b/rel-eng/packages/rhncfg index ab0a1ef..1131cd2 100644 --- a/rel-eng/packages/rhncfg +++ b/rel-eng/packages/rhncfg @@ -1 +1 @@ -5.9.48-1 client/tools/rhncfg/ +5.9.49-1 client/tools/rhncfg/ commit 2dfde5c78b1a657f8ae54a503d8dd8bdd3ccd51c Author: Miroslav Suchý <msuchy(a)redhat.com> Date: Tue Feb 15 13:42:04 2011 +0100 675164 - do not traceback if file do not differ addressing: Traceback (most recent call last): File "/usr/bin/rhncfg-client", line 34, in ? sys.exit(Main().main() or 0) File "/usr/share/rhn/config_common/rhn_main.py", line 187, in main handler.run() File "/usr/share/rhn/config_client/rhncfgcli_verify.py", line 159, in run maxlen = max(0, map(lambda x: len(x['status']), ret)) + 1 TypeError: can only concatenate list (not "int") to list diff --git a/client/tools/rhncfg/config_client/rhncfgcli_verify.py b/client/tools/rhncfg/config_client/rhncfgcli_verify.py index a86e1b7..1f0a05e 100644 --- a/client/tools/rhncfg/config_client/rhncfgcli_verify.py +++ b/client/tools/rhncfg/config_client/rhncfgcli_verify.py @@ -156,7 +156,7 @@ class Handler(handler_base.HandlerBase): #Not verbose, so give the simple output for each file... else: outstring = "%*s %s" - maxlen = max(0, map(lambda x: len(x['status']), ret)) + 1 + maxlen = max([0] + map(lambda x: len(x['status']), ret)) + 1 for fdict in ret: if self.options.only and len(fdict['status']) == 0: continue

1 0

schema/spacewalk
by Jan Pazdziora 15 Feb '11

15 Feb '11

schema/spacewalk/common/tables/rhnActionErrataUpdate.sql | 4 ++-- schema/spacewalk/upgrade/spacewalk-schema-1.3-to-spacewalk-schema-1.4/002-rhnActionErrataUpdate-unique.sql | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) New commits: commit 9a156f63c88b0fa791437e7de7888d28aa2763ec Author: Jan Pazdziora <jpazdziora(a)redhat.com> Date: Tue Feb 15 12:04:00 2011 +0100 Make the index on rhnActionErrataUpdate (action_id, errata_id) unique. diff --git a/schema/spacewalk/common/tables/rhnActionErrataUpdate.sql b/schema/spacewalk/common/tables/rhnActionErrataUpdate.sql index 138bfa0..5c6e7a6 100644 --- a/schema/spacewalk/common/tables/rhnActionErrataUpdate.sql +++ b/schema/spacewalk/common/tables/rhnActionErrataUpdate.sql @@ -1,5 +1,5 @@ -- --- Copyright (c) 2008--2010 Red Hat, Inc. +-- Copyright (c) 2008--2011 Red Hat, Inc. -- -- This software is licensed to you under the GNU General Public License, -- version 2 (GPLv2). There is NO WARRANTY for this software, express or @@ -28,7 +28,7 @@ CREATE TABLE rhnActionErrataUpdate ENABLE ROW MOVEMENT ; -CREATE INDEX rhn_act_eu_aid_eid_idx +CREATE UNIQUE INDEX rhn_act_eu_aid_eid_uq ON rhnActionErrataUpdate (action_id, errata_id) TABLESPACE [[8m_tbs]]; diff --git a/schema/spacewalk/upgrade/spacewalk-schema-1.3-to-spacewalk-schema-1.4/002-rhnActionErrataUpdate-unique.sql b/schema/spacewalk/upgrade/spacewalk-schema-1.3-to-spacewalk-schema-1.4/002-rhnActionErrataUpdate-unique.sql new file mode 100644 index 0000000..3af941d --- /dev/null +++ b/schema/spacewalk/upgrade/spacewalk-schema-1.3-to-spacewalk-schema-1.4/002-rhnActionErrataUpdate-unique.sql @@ -0,0 +1,4 @@ + +drop index rhn_act_eu_aid_eid_idx; +create unique index rhn_act_eu_aid_eid_uq on rhnActionErrataUpdate (action_id, errata_id); +

1 0

client/rhel
by Transifex System User 15 Feb '11

15 Feb '11

client/rhel/yum-rhn-plugin/po/ru.po | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) New commits: commit d131f7281d1edc3b75c0e47f01be2c388b3f8fe0 Author: ypoyarko <ypoyarko(a)fedoraproject.org> Date: Tue Feb 15 06:09:06 2011 +0000 l10n: Updates to Russian (ru) translation Transmitted-via: Transifex (translate.fedoraproject.org) diff --git a/client/rhel/yum-rhn-plugin/po/ru.po b/client/rhel/yum-rhn-plugin/po/ru.po index 53ce141..c420319 100644 --- a/client/rhel/yum-rhn-plugin/po/ru.po +++ b/client/rhel/yum-rhn-plugin/po/ru.po @@ -1,3 +1,4 @@ +# translation of ru.po to Russian # translation of ru.po to # translation of ru.po to # This file is distributed under the same license as the PACKAGE package. @@ -9,16 +10,15 @@ msgstr "" "Project-Id-Version: ru\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2011-01-20 05:57-0500\n" -"PO-Revision-Date: 2010-05-14 09:01\n" -"Last-Translator: Yulia <ypoyarko(a)redhat.com>\n" +"PO-Revision-Date: 2011-02-15 16:55+1100\n" +"Last-Translator: \n" "Language-Team: Russian\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: \n" "X-Generator: KBabel 1.11.4\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%" -"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" #: ../rhnplugin.py:48 msgid "There was an error communicating with RHN." @@ -33,13 +33,11 @@ msgstr "Поддержка RHN будет отключена." msgid "" "*Note* Red Hat Network repositories are not listed below. You must run this " "command as root to access RHN repositories." -msgstr "" -"*Примечание* Этот список не содержит репозитории Red Hat Network. Чтобы " -"получить к ним доступ, выполните эту команду в режиме root." +msgstr "*Примечание* Этот список не содержит репозитории Red Hat Network. Чтобы получить к ним доступ, выполните эту команду в режиме root." #: ../rhnplugin.py:108 msgid "There was an error parsing the RHN proxy settings." -msgstr "Ошибка при обработке настроек RHN proxy." +msgstr "Ошибка при обработке настроек прокси-сервера RHN." #: ../rhnplugin.py:122 msgid "This system is not registered with RHN." @@ -51,18 +49,15 @@ msgstr "Поддержка каналов RHN будет отключена." #: ../rhnplugin.py:131 msgid "This system is not subscribed to any channels." -msgstr "Эта система не подписана на каналы." +msgstr "Эта система не подписана на каналы" #: ../rhnplugin.py:135 -msgid "" -"This system may not be a registered to RHN. SystemId could not be acquired.\n" -msgstr "" -"Возможно, эта система не зарегистрирована в RHN. Не удалось получить " -"SystemID.\n" +msgid "This system may not be a registered to RHN. SystemId could not be acquired.\n" +msgstr "Возможно, эта система не зарегистрирована в RHN. Не удалось получить SystemID.\n" #: ../rhnplugin.py:193 msgid "Package profile information could not be sent." -msgstr "Не удалось отправить информацию о профиле пакета." +msgstr "Не удалось отправить информацию о профиле пакетов." #. This is compensating for hosted/satellite returning back an error #. message instructing RHEL5 clients to run "up2date --register" @@ -78,10 +73,5 @@ msgstr "Выполните rhn_register в режиме root на этом кл #: ../rhnplugin.py:280 #, python-format msgid "Missing required login information for RHN: %s" -msgstr "Отсутствует необходимая информация для входа в RHN: %s" - -#~ msgid "Cleaning" -#~ msgstr "Очистка" +msgstr "Отсутствуют необходимые данные для входа в RHN: %s" -#~ msgid "Either --version, or no commands entered" -#~ msgstr "Не указан ключ --version или не заданы команды"

1 0

client/rhel
by Transifex System User 15 Feb '11

15 Feb '11

client/rhel/rhn-client-tools/po/ru.po | 96 +++++++++++++--------------------- 1 file changed, 37 insertions(+), 59 deletions(-) New commits: commit 1a661fcedacc199894bc59354e114092e35bfe73 Author: ypoyarko <ypoyarko(a)fedoraproject.org> Date: Tue Feb 15 05:14:00 2011 +0000 l10n: Updates to Russian (ru) translation Transmitted-via: Transifex (translate.fedoraproject.org) diff --git a/client/rhel/rhn-client-tools/po/ru.po b/client/rhel/rhn-client-tools/po/ru.po index d7cef4d..d73bea9 100644 --- a/client/rhel/rhn-client-tools/po/ru.po +++ b/client/rhel/rhn-client-tools/po/ru.po @@ -11,7 +11,7 @@ msgstr "" "Project-Id-Version: ru\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2011-01-20 05:57-0500\n" -"PO-Revision-Date: 2011-02-14 14:55+1100\n" +"PO-Revision-Date: 2011-02-15 16:11+1100\n" "Last-Translator: \n" "Language-Team: Russian\n" "MIME-Version: 1.0\n" @@ -596,7 +596,6 @@ msgstr "" "статье 11313 базы знаний (http://kbase.redhat.com/faq/docs/DOC-11313)." #: ../src/up2date_client/rhnreg_constants.py:168 -#, fuzzy msgid "" "Warning: If an installed product on this system is not listed above, you " "will not receive updates or support for that product. If you would like to " @@ -605,11 +604,11 @@ msgid "" "for that product. See Kbase article 11313 for more details. (http://kbase." "redhat.com/faq/docs/DOC-11313)" msgstr "" -"Предупреждение: если установленный продукт не указан в списке, вы не будете " +"Предупреждение. Если установленный продукт отсутствует в списке, вы не будете " "получать его обновления. Если вы хотите получать обновления для этого " -"продукта, перейдите на http://rhn.redhat.com/ и подпишите систему к " -"необходимым каналам ПО для получения обновлений. Подробности в статье 6227 " -"Kbase (http://kbase.redhat.com/faq/FAQ_58_6227.shtm)" +"продукта, перейдите к http://rhn.redhat.com/ и подпишите систему к " +"необходимым каналам ПО для получения обновлений продукта. Подробности в " +"статье 11313 Kbase (http://kbase.redhat.com/faq/docs/DOC-11313)" #: ../src/up2date_client/rhnreg_constants.py:179 msgid "" @@ -1614,57 +1613,51 @@ msgstr "список доступных дочерних каналов" #: ../src/bin/spacewalk-channel.py:66 msgid "verbose output" -msgstr "" +msgstr "подробный вывод" #: ../src/bin/spacewalk-channel.py:68 -#, fuzzy msgid "your user name" -msgstr "Укажите имя пользователя" +msgstr "ваше имя пользователя" #: ../src/bin/spacewalk-channel.py:70 -#, fuzzy msgid "your password" -msgstr "Укажите пароль" +msgstr "ваш пароль" #: ../src/bin/spacewalk-channel.py:78 msgid "ERROR: these arguments make no sense in this context (try --help)" msgstr "" #: ../src/bin/spacewalk-channel.py:80 -#, fuzzy msgid "Username: " -msgstr "Имя узла: " +msgstr "Имя пользователя: " #: ../src/bin/spacewalk-channel.py:104 msgid "ERROR: you have to specify at least one channel" -msgstr "" +msgstr "ОШИБКА: необходимо указать как минимум один канал" #: ../src/bin/spacewalk-channel.py:112 #, python-format msgid "Channel(s): %s successfully added" -msgstr "" +msgstr "Успешно добавлены каналы: %s" #: ../src/bin/spacewalk-channel.py:114 #, python-format msgid "Error during adding channel(s) %s" -msgstr "" +msgstr "Ошибка при добавлении каналов: %s" #: ../src/bin/spacewalk-channel.py:122 #, python-format msgid "Channel(s): %s successfully removed" -msgstr "" +msgstr "Успешно удалены каналы: %s" #: ../src/bin/spacewalk-channel.py:124 #, python-format msgid "Error during removal of channel(s) %s" -msgstr "" +msgstr "Ошибка при удалении каналов: %s" #: ../src/bin/spacewalk-channel.py:131 -#, fuzzy msgid "This system is not associated with any channel." -msgstr "" -"Данная система не может быть обновлена до тех пор, пока не будет связана с " -"каким-либо каналом." +msgstr "Эта система не связана с каналами." #: ../src/bin/spacewalk-channel.py:139 msgid "ERROR: you may want to specify --add, --remove or --list" @@ -1703,13 +1696,12 @@ msgid "Progress Dialog" msgstr "Степень выполнения" #: ../data/progress.glade.h:2 -#, fuzzy msgid "progress bar" -msgstr "Степень выполнения" +msgstr "индикатор прогресса" #: ../data/progress.glade.h:3 msgid "progress status" -msgstr "" +msgstr "статус" #: ../data/rh_register.glade.h:1 msgid "" @@ -1890,9 +1882,8 @@ msgid "Advanced Network Configuration" msgstr "Расширенная настройка сети" #: ../data/rh_register.glade.h:36 -#, fuzzy msgid "Advanced Network Configuration button" -msgstr "Расширенная настройка сети" +msgstr "кнопка расширенной настройки сети" #: ../data/rh_register.glade.h:37 msgid "Advanced _Network Configuration ..." @@ -1900,7 +1891,7 @@ msgstr "Расширенная настройка _сети.." #: ../data/rh_register.glade.h:39 msgid "Aplet screenshot" -msgstr "" +msgstr "снимок экрана апплета" #: ../data/rh_register.glade.h:40 msgid "" @@ -1927,14 +1918,12 @@ msgid "Choose Channel" msgstr "Выберите канал" #: ../data/rh_register.glade.h:47 -#, fuzzy msgid "Choose minor release" -msgstr "_Вспомогательный выпуск:" +msgstr "Промежуточный выпуск" #: ../data/rh_register.glade.h:48 -#, fuzzy msgid "Close" -msgstr "_Закрыть" +msgstr "Закрыть" #: ../data/rh_register.glade.h:49 msgid "Confirm operation system release selection" @@ -2010,9 +1999,8 @@ msgid "Installation _Number:" msgstr "Код _установки:" #: ../data/rh_register.glade.h:67 -#, fuzzy msgid "Limited updates" -msgstr "Только ограниченные обновления" +msgstr "Ограниченные обновления" #: ../data/rh_register.glade.h:68 msgid "Link To Subscription" @@ -2032,9 +2020,8 @@ msgid "Memory:" msgstr "Память:" #: ../data/rh_register.glade.h:71 -#, fuzzy msgid "No thanks, I'll connect later." -msgstr "_Нет, спасибо. Я зарегистрируюсь позже." +msgstr "Нет, спасибо. Я зарегистрируюсь позже." #: ../data/rh_register.glade.h:73 msgid "Package Information" @@ -2072,11 +2059,11 @@ msgstr "" #: ../data/rh_register.glade.h:81 msgid "RHN login field" -msgstr "" +msgstr "Поле имени входа RHN" #: ../data/rh_register.glade.h:82 msgid "RHN password field" -msgstr "" +msgstr "Поле пароля RHN" #: ../data/rh_register.glade.h:83 msgid "" @@ -2112,14 +2099,12 @@ msgid "Send _package profile" msgstr "Передать профиль п_акетов" #: ../data/rh_register.glade.h:90 -#, fuzzy msgid "Send hardware profile checkbox" -msgstr "Передать профиль _оборудования" +msgstr "Флажок передачи профиля оборудования" #: ../data/rh_register.glade.h:91 -#, fuzzy msgid "Send package profile checkbox" -msgstr "Передать профиль п_акетов" +msgstr "Флажок передачи профиля пакетов" #: ../data/rh_register.glade.h:92 msgid "Software update setup has been completed for this system." @@ -2134,9 +2119,8 @@ msgid "System _Name:" msgstr "Имя _системы:" #: ../data/rh_register.glade.h:97 -#, fuzzy msgid "Take me back to the registration" -msgstr "_Вернуться к регистрации" +msgstr "Вернуться к регистрации" #: ../data/rh_register.glade.h:99 msgid "" @@ -2173,23 +2157,20 @@ msgid "Use Au_thentication with HTTP Proxy:" msgstr "А_утентификация на HTTP Proxy:" #: ../data/rh_register.glade.h:107 -#, fuzzy msgid "Use Authentication with HTTP Proxy" -msgstr "А_утентификация на HTTP Proxy:" +msgstr "Включить аутентификацию прокси HTTP:" #: ../data/rh_register.glade.h:108 msgid "V_iew Package Profile ..." msgstr "П_росмотр профиля пакетов..." #: ../data/rh_register.glade.h:109 -#, fuzzy msgid "View Hardware Profile" -msgstr "_Просмотр профиля оборудования..." +msgstr "Просмотр профиля оборудования" #: ../data/rh_register.glade.h:110 -#, fuzzy msgid "View Package Profile" -msgstr "П_росмотр профиля пакетов..." +msgstr "Просмотр профиля пакетов" #: ../data/rh_register.glade.h:111 msgid "Why Register" @@ -2371,7 +2352,7 @@ msgstr "_Да, зарегистрироваться сейчас" #: ../data/rh_register.glade.h:148 msgid "icon of aplet" -msgstr "" +msgstr "значок апплета" #: ../data/rh_register.glade.h:149 msgid "installation number field" @@ -2382,27 +2363,24 @@ msgid "label" msgstr "метка" #: ../data/rh_register.glade.h:151 -#, fuzzy msgid "proxy location" -msgstr "Расположение _Proxy:" +msgstr "расположение прокси" #: ../data/rh_register.glade.h:152 -#, fuzzy msgid "proxy password field" -msgstr "_Пароль Proxy:" +msgstr "поле пароля прокси" #: ../data/rh_register.glade.h:153 msgid "proxy user field" -msgstr "" +msgstr "поле пользователя прокси" #: ../data/rh_register.glade.h:154 msgid "satellite server location" -msgstr "" +msgstr "расположение сервера Satellite" #: ../data/rh_register.glade.h:155 -#, fuzzy msgid "system name" -msgstr "Имя _системы:" +msgstr "имя системы" #: ../data/rh_register.glade.h:156 msgid "•"

1 0

rel-eng/comps
by Tomas Lestach 14 Feb '11

14 Feb '11

rel-eng/comps/comps-spacewalk-client-fedora12.xml | 42 --- rel-eng/comps/comps-spacewalk-server-fedora12.xml | 260 ---------------------- 2 files changed, 302 deletions(-) New commits: commit 18364ad73a5b408a288eb264a251f49141633f62 Author: Tomas Lestach <tlestach(a)redhat.com> Date: Mon Feb 14 17:51:15 2011 +0100 removing unused fedora12 comps diff --git a/rel-eng/comps/comps-spacewalk-client-fedora12.xml b/rel-eng/comps/comps-spacewalk-client-fedora12.xml deleted file mode 100644 index 9ce8d92..0000000 --- a/rel-eng/comps/comps-spacewalk-client-fedora12.xml +++ /dev/null @@ -1,42 +0,0 @@ -<?xml version="1.0"?> -<!DOCTYPE comps PUBLIC "-//Red Hat, Inc.//DTD Comps info//EN" "comps.dtd"> - -<comps> - - - - <group> - <id>spacewalk-client</id> - <name>Spacewalk Client</name> - <description>Spacewalk Client Packages</description> - <uservisible>true</uservisible> - <packagelist> - <packagereq type="default">rhncfg</packagereq> - <packagereq type="default">rhncfg-actions</packagereq> - <packagereq type="default">rhncfg-client</packagereq> - <packagereq type="default">rhncfg-management</packagereq> - <packagereq type="default">rhn-custom-info</packagereq> - <packagereq type="default">osad</packagereq> - <packagereq type="default">rhn-client-tools</packagereq> - <packagereq type="default">rhn-kickstart</packagereq> - <packagereq type="default">rhn-kickstart-common</packagereq> - <packagereq type="default">rhn-kickstart-virtualization</packagereq> - <packagereq type="default">rhn-virtualization</packagereq> - <packagereq type="default">rhn-virtualization-common</packagereq> - <packagereq type="default">rhn-virtualization-guest</packagereq> - <packagereq type="default">rhn-virtualization-host</packagereq> - <packagereq type="default">spacewalk-koan</packagereq> - <packagereq type="default">rhnlib</packagereq> - <packagereq type="default">rhnmd</packagereq> - <packagereq type="default">rhnsd</packagereq> - <packagereq type="default">rhn-check</packagereq> - <packagereq type="default">rhn-setup</packagereq> - <packagereq type="default">rhn-setup-gnome</packagereq> - <packagereq type="default">yum-rhn-plugin</packagereq> - <packagereq type="default">spacewalk-certs-tools</packagereq> - <packagereq type="default">spacewalk-backend-libs</packagereq> - <packagereq type="default">python-ethtool</packagereq> - <packagereq type="default">python-hwdata</packagereq> - </packagelist> - </group> -</comps> diff --git a/rel-eng/comps/comps-spacewalk-server-fedora12.xml b/rel-eng/comps/comps-spacewalk-server-fedora12.xml deleted file mode 100644 index 7890a31..0000000 --- a/rel-eng/comps/comps-spacewalk-server-fedora12.xml +++ /dev/null @@ -1,260 +0,0 @@ -<?xml version="1.0"?> -<!DOCTYPE comps PUBLIC "-//Red Hat, Inc.//DTD Comps info//EN" "comps.dtd"> - -<comps> - - - - <group> - <id>spacewalk-server</id> - <name>Spacewalk Server</name> - <description>Spacewalk Server Packages</description> - <uservisible>true</uservisible> - <packagelist> - <packagereq type="default">ant-contrib</packagereq> - <packagereq type="default">ant-contrib-javadoc</packagereq> - <packagereq type="default">ant-contrib-manual</packagereq> - <packagereq type="default">asm</packagereq> - <packagereq type="default">asm-javadoc</packagereq> - <packagereq type="default">bea-stax</packagereq> - <packagereq type="default">bea-stax-api</packagereq> - <packagereq type="default">bea-stax-javadoc</packagereq> - <packagereq type="default">c3p0</packagereq> - <packagereq type="default">c3p0-javadoc</packagereq> - <packagereq type="default">cglib</packagereq> - <packagereq type="default">cglib-demo</packagereq> - <packagereq type="default">cglib-javadoc</packagereq> - <packagereq type="default">cglib-nohook</packagereq> - <packagereq type="default">cglib-repolib</packagereq> - <packagereq type="default">chameleon</packagereq> - <packagereq type="default">concurrent</packagereq> - <packagereq type="default">concurrent-javadoc</packagereq> - <packagereq type="default">concurrent-repolib</packagereq> - <packagereq type="default">cx_Oracle</packagereq> - <packagereq type="default">dom4j</packagereq> - <packagereq type="default">dom4j-demo</packagereq> - <packagereq type="default">dom4j-javadoc</packagereq> - <packagereq type="default">dom4j-manual</packagereq> - <packagereq type="default">dom4j-repolib</packagereq> - <packagereq type="default">ehcache</packagereq> - <packagereq type="default">ehcache-hibernate</packagereq> - <packagereq type="default">ehcache-javadoc</packagereq> - <packagereq type="default">eventReceivers</packagereq> - <packagereq type="default">heirloom-pkgtools</packagereq> - <packagereq type="default">hibernate3</packagereq> - <packagereq type="default">hibernate3-javadoc</packagereq> - <packagereq type="default">hibernate3-manual</packagereq> - <packagereq type="default">hibernate3-repolib</packagereq> - <packagereq type="default">icu4j</packagereq> - <packagereq type="default">icu4j-javadoc</packagereq> - <packagereq type="default">isorelax</packagereq> - <packagereq type="default">isorelax-javadoc</packagereq> - <packagereq type="default">jabberd-selinux</packagereq> - <packagereq type="default">jakarta-commons-cli</packagereq> - <packagereq type="default">jakarta-commons-cli-javadoc</packagereq> - <packagereq type="default">jakarta-commons-configuration</packagereq> - <packagereq type="default">jakarta-commons-configuration-javadoc</packagereq> - <packagereq type="default">jakarta-commons-io</packagereq> - <packagereq type="default">jakarta-commons-io-javadoc</packagereq> - <packagereq type="default">jaxen</packagereq> - <packagereq type="default">jaxen-demo</packagereq> - <packagereq type="default">jaxen-javadoc</packagereq> - <packagereq type="default">jaxen-manual</packagereq> - <packagereq type="default">jaxen-repolib</packagereq> - <packagereq type="default">jcommon</packagereq> - <packagereq type="default">jcommon-javadoc</packagereq> - <packagereq type="default">jcommon-repolib</packagereq> - <packagereq type="default">jcommon-test</packagereq> - <packagereq type="default">jpam</packagereq> - <packagereq type="default">jpam-javadoc</packagereq> - <packagereq type="default">MessageQueue</packagereq> - <packagereq type="default">msv</packagereq> - <packagereq type="default">msv-demo</packagereq> - <packagereq type="default">msv-javadoc</packagereq> - <packagereq type="default">msv-manual</packagereq> - <packagereq type="default">msv-relames</packagereq> - <packagereq type="default">msv-relames-javadoc</packagereq> - <packagereq type="default">msv-rngconv</packagereq> - <packagereq type="default">msv-xmlgen</packagereq> - <packagereq type="default">msv-xmlgen-javadoc</packagereq> - <packagereq type="default">msv-xsdlib</packagereq> - <packagereq type="default">msv-xsdlib-javadoc</packagereq> - <packagereq type="default">nocpulse-common</packagereq> - <packagereq type="default">nocpulse-db-perl</packagereq> - <packagereq type="default">NOCpulsePlugins</packagereq> - <packagereq type="default">NOCpulsePlugins-Oracle</packagereq> - <packagereq type="default">NPalert</packagereq> - <packagereq type="default">nutch</packagereq> - <packagereq type="default">oracle-instantclient-selinux</packagereq> - <packagereq type="default">oracle-instantclient-sqlplus-selinux</packagereq> - <packagereq type="default">oracle-lib-compat</packagereq> - <packagereq type="default">oracle-nofcontext-selinux</packagereq> - <packagereq type="default">oracle-rhnsat-selinux</packagereq> - <packagereq type="default">oracle-selinux</packagereq> - <packagereq type="default">oracle-xe-selinux</packagereq> - <packagereq type="default">osa-dispatcher</packagereq> - <packagereq type="default">osa-dispatcher-selinux</packagereq> - <packagereq type="default">oscache</packagereq> - <packagereq type="default">oscache-javadoc</packagereq> - <packagereq type="default">oscache-manual</packagereq> - <packagereq type="default">perl-Apache-Admin-Config</packagereq> - <packagereq type="default">perl-Authen-PAM</packagereq> - <packagereq type="default">perl-Class-Loader</packagereq> - <packagereq type="default">perl-Convert-ASCII-Armour</packagereq> - <packagereq type="default">perl-Convert-PEM</packagereq> - <packagereq type="default">perl-Crypt-Blowfish</packagereq> - <packagereq type="default">perl-Crypt-CAST5_PP</packagereq> - <packagereq type="default">perl-Crypt-CBC</packagereq> - <packagereq type="default">perl-Crypt-DES</packagereq> - <packagereq type="default">perl-Crypt-DES_EDE3</packagereq> - <packagereq type="default">perl-Data-Buffer</packagereq> - <packagereq type="default">perl-DateTime-Locale</packagereq> - <packagereq type="default">perl-DateTime-TimeZone</packagereq> - <packagereq type="default">perl-DBD-Oracle</packagereq> - <packagereq type="default">perl-DBD-Oracle-explain</packagereq> - <packagereq type="default">perl-Error</packagereq> - <packagereq type="default">perl-FreezeThaw</packagereq> - <packagereq type="default">perl-IO-stringy</packagereq> - <packagereq type="default">perl-Mail-RFC822-Address</packagereq> - <packagereq type="default">perl-Network-IPv4Addr</packagereq> - <packagereq type="default">perl-NOCpulse-CLAC</packagereq> - <packagereq type="default">perl-NOCpulse-Debug</packagereq> - <packagereq type="default">perl-NOCpulse-Gritch</packagereq> - <packagereq type="default">perl-NOCpulse-Object</packagereq> - <packagereq type="default">perl-NOCpulse-OracleDB</packagereq> - <packagereq type="default">perl-NOCpulse-PersistentConnection</packagereq> - <packagereq type="default">perl-NOCpulse-Probe</packagereq> - <packagereq type="default">perl-NOCpulse-Probe-Oracle</packagereq> - <packagereq type="default">perl-NOCpulse-ProcessPool</packagereq> - <packagereq type="default">perl-NOCpulse-Scheduler</packagereq> - <packagereq type="default">perl-NOCpulse-SetID</packagereq> - <packagereq type="default">perl-NOCpulse-Utils</packagereq> - <packagereq type="default">perl-RPM2</packagereq> - <packagereq type="default">perl-Satcon</packagereq> - <packagereq type="default">perl-Sort-Versions</packagereq> - <packagereq type="default">perl-Tie-EncryptedHash</packagereq> - <packagereq type="default">perl-XML-Generator</packagereq> - <packagereq type="default">ProgAGoGo</packagereq> - <packagereq type="default">PyPAM</packagereq> - <packagereq type="default">python-ethtool</packagereq> - <packagereq type="default">python-gzipstream</packagereq> - <packagereq type="default">python-debian</packagereq> - <packagereq type="default">quartz</packagereq> - <packagereq type="default">quartz-oracle</packagereq> - <packagereq type="default">redstone-xmlrpc</packagereq> - <packagereq type="default">relaxngDatatype</packagereq> - <packagereq type="default">relaxngDatatype-javadoc</packagereq> - <packagereq type="default">rhn-oracle-jdbc</packagereq> - <packagereq type="default">rhn-oracle-jdbc-tomcat5</packagereq> - <packagereq type="default">rhnlib</packagereq> - <packagereq type="default">rhnpush</packagereq> - <packagereq type="default">SatConfig-bootstrap</packagereq> - <packagereq type="default">SatConfig-bootstrap-server</packagereq> - <packagereq type="default">SatConfig-cluster</packagereq> - <packagereq type="default">SatConfig-dbsynch</packagereq> - <packagereq type="default">SatConfig-general</packagereq> - <packagereq type="default">SatConfig-generator</packagereq> - <packagereq type="default">SatConfig-installer</packagereq> - <packagereq type="default">SatConfig-spread</packagereq> - <packagereq type="default">scdb</packagereq> - <packagereq type="default">servletapi4</packagereq> - <packagereq type="default">servletapi4-javadoc</packagereq> - <packagereq type="default">simple-core</packagereq> - <packagereq type="default">sitemesh</packagereq> - <packagereq type="default">sitemesh-javadoc</packagereq> - <packagereq type="default">SNMPAlerts</packagereq> - <packagereq type="default">spacecmd</packagereq> - <packagereq type="default">spacewalk</packagereq> - <packagereq type="default">spacewalk-admin</packagereq> - <packagereq type="default">spacewalk-backend</packagereq> - <packagereq type="default">spacewalk-backend-app</packagereq> - <packagereq type="default">spacewalk-backend-applet</packagereq> - <packagereq type="default">spacewalk-backend-config-files</packagereq> - <packagereq type="default">spacewalk-backend-config-files-common</packagereq> - <packagereq type="default">spacewalk-backend-config-files-tool</packagereq> - <packagereq type="default">spacewalk-backend-iss</packagereq> - <packagereq type="default">spacewalk-backend-iss-export</packagereq> - <packagereq type="default">spacewalk-backend-libs</packagereq> - <packagereq type="default">spacewalk-backend-package-push-server</packagereq> - <packagereq type="default">spacewalk-backend-server</packagereq> - <packagereq type="default">spacewalk-backend-sql</packagereq> - <packagereq type="default">spacewalk-backend-sql-oracle</packagereq> - <packagereq type="default">spacewalk-backend-sql-postgresql</packagereq> - <packagereq type="default">spacewalk-backend-tools</packagereq> - <packagereq type="default">spacewalk-backend-upload-server</packagereq> - <packagereq type="default">spacewalk-backend-xml-export-libs</packagereq> - <packagereq type="default">spacewalk-backend-xmlrpc</packagereq> - <packagereq type="default">spacewalk-backend-xp</packagereq> - <packagereq type="default">spacewalk-base</packagereq> - <packagereq type="default">spacewalk-base-minimal</packagereq> - <packagereq type="default">spacewalk-branding</packagereq> - <packagereq type="default">spacewalk-certs-tools</packagereq> - <packagereq type="default">spacewalk-client-repo</packagereq> - <packagereq type="default">spacewalk-common</packagereq> - <packagereq type="default">spacewalk-config</packagereq> - <packagereq type="default">spacewalk-cypress</packagereq> - <packagereq type="default">spacewalk-dobby</packagereq> - <packagereq type="default">spacewalk-doc-indexes</packagereq> - <packagereq type="default">spacewalk-grail</packagereq> - <packagereq type="default">spacewalk-html</packagereq> - <packagereq type="default">spacewalk-java</packagereq> - <packagereq type="default">spacewalk-java-config</packagereq> - <packagereq type="default">spacewalk-java-lib</packagereq> - <packagereq type="default">spacewalk-java-oracle</packagereq> - <packagereq type="default">spacewalk-java-postgresql</packagereq> - <packagereq type="default">spacewalk-monitoring</packagereq> - <packagereq type="default">spacewalk-monitoring-selinux</packagereq> - <packagereq type="default">spacewalk-moon</packagereq> - <packagereq type="default">spacewalk-oracle</packagereq> - <packagereq type="default">spacewalk-postgresql</packagereq> - <packagereq type="default">spacewalk-proxy</packagereq> - <packagereq type="default">spacewalk-proxy-broker</packagereq> - <packagereq type="default">spacewalk-proxy-common</packagereq> - <packagereq type="default">spacewalk-proxy-docs</packagereq> - <packagereq type="default">spacewalk-proxy-html</packagereq> - <packagereq type="default">spacewalk-proxy-installer</packagereq> - <packagereq type="default">spacewalk-proxy-management</packagereq> - <packagereq type="default">spacewalk-proxy-monitoring</packagereq> - <packagereq type="default">spacewalk-proxy-package-manager</packagereq> - <packagereq type="default">spacewalk-proxy-redirect</packagereq> - <packagereq type="default">spacewalk-proxy-selinux</packagereq> - <packagereq type="default">spacewalk-pxt</packagereq> - <packagereq type="default">spacewalk-repo</packagereq> - <packagereq type="default">spacewalk-reports</packagereq> - <packagereq type="default">spacewalk-schema</packagereq> - <packagereq type="default">spacewalk-search</packagereq> - <packagereq type="default">spacewalk-selinux</packagereq> - <packagereq type="default">spacewalk-setup</packagereq> - <packagereq type="default">spacewalk-setup-jabberd</packagereq> - <packagereq type="default">spacewalk-slf4j</packagereq> - <packagereq type="default">spacewalk-sniglets</packagereq> - <packagereq type="default">spacewalk-ssl-cert-check</packagereq> - <packagereq type="default">spacewalk-taskomatic</packagereq> - <packagereq type="default">spacewalk-utils</packagereq> - <packagereq type="default">spacewalk-web</packagereq> - <packagereq type="default">SputLite</packagereq> - <packagereq type="default">SputLite-client</packagereq> - <packagereq type="default">SputLite-server</packagereq> - <packagereq type="default">ssl_bridge</packagereq> - <packagereq type="default">status_log_acceptor</packagereq> - <packagereq type="default">stringtree-json</packagereq> - <packagereq type="default">tanukiwrapper</packagereq> - <packagereq type="default">tanukiwrapper-javadoc</packagereq> - <packagereq type="default">tanukiwrapper-manual</packagereq> - <packagereq type="default">tsdb</packagereq> - <packagereq type="default">ws-jaxme</packagereq> - <packagereq type="default">ws-jaxme-javadoc</packagereq> - <packagereq type="default">ws-jaxme-manual</packagereq> - <packagereq type="default">xom</packagereq> - <packagereq type="default">xom-demo</packagereq> - <packagereq type="default">xom-javadoc</packagereq> - <packagereq type="default">xpp2</packagereq> - <packagereq type="default">xpp2-demo</packagereq> - <packagereq type="default">xpp2-javadoc</packagereq> - <packagereq type="default">xpp2-manual</packagereq> - <packagereq type="default">xpp3</packagereq> - <packagereq type="default">xpp3-javadoc</packagereq> - <packagereq type="default">xpp3-minimal</packagereq> - </packagelist> - </group> -</comps>

1 0

← Newer
1
...
16
17
18
19
20
21
22
...
36
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

spacewalk-commits February 2011