[sssd PR#214][opened] UTIL: Set udp_preference_limit=0 in krb5 snippet

[celestian]

   URL: https://github.com/SSSD/sssd/pull/214
Author: celestian
 Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet
Action: opened

PR body:
"""
We add udp_preference_limit = 0 to krb5 snippet. This option enable TCP
connection before UDP, when sending a message to the KDC.

Resolves:
https://pagure.io/SSSD/sssd/issue/3254
"""

To pull the PR as Git branch:
git remote add ghsssd https://github.com/SSSD/sssd
git fetch ghsssd pull/214/head:pr214
git checkout pr214

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[frozencemetery]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

frozencemetery commented:
"""
I read the associated bug as suggesting doing this only when using AD, but this patch does
it unconditionally.  I would prefer not doing this unconditionally.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-289825032

[sssd PR#214][+Changes requested] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Changes requested

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[celestian]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

celestian commented:
"""
I see
```
Warning: Permanently added '172.19.2.156' (ECDSA) to the list of known hosts.
install-deps:           success  00:01:07 ci-install-deps.log
autoreconf:             success  00:00:34 ci-autoreconf.log
DEBUG BUILD:                              ci-build-debug
configure:              failure  00:00:22 ci-build-debug/ci-configure.log
FAILURE
```
is it possible to look at logs?

Respectively I tried to run the tests in our CI, but connection failed:
```
$ git push ci HEAD:master
ssh_exchange_identification: Connection closed by remote host
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.
```
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-290627840

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[celestian]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

celestian commented:
"""
I see
```
Warning: Permanently added '172.19.2.156' (ECDSA) to the list of known hosts.
install-deps:           success  00:01:07 ci-install-deps.log
autoreconf:             success  00:00:34 ci-autoreconf.log
DEBUG BUILD:                              ci-build-debug
configure:              failure  00:00:22 ci-build-debug/ci-configure.log
FAILURE
```
is it possible to look at logs?

Respectively I tried to run the tests in our CI, but connection failed:
```
$ git push ci HEAD:master
ssh_exchange_identification: Connection closed by remote host
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.
```
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-290627840

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
@frozencemetery: is your comment still valid for the latest version of this patch? I'm
not sure whether @celestian updated this patch after your comment or not and excuse me in
case I'm mistaken, but now seems that those patches are setting `udp_preference_limit
= 0` conditionally in the krb5 snippet.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318269285

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
retest this, please
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318278533

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[celestian]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

celestian commented:
"""
@fidencio I am totally out of scope of this PR. I just assume that I addressed 
@frozencemetery 's comment from Mar 28. The conditional setting  was subject of
frozencemetery's comment.

@fidencio, Is this sufficient answer for you?
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318288827

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
@celestian: basically I'm trying to figure out whether his comments are still valid
and I misunderstood the last patch. Because looks like the last patch addresses his
comments ... or am I mistaken?

Anyways, someone will take it over, so just trying to get as much context as possible for
whoever does that.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318290260

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[celestian]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

celestian commented:
"""
@fidencio Oh, I see -- now I understand what are you looking for. Maybe it is little
confusing, there on github, that it is not visible that my patch is already updated/fixed.
So there were another one patch before this one but it is not reachable from gtithub (nor
from my local repo, I deleted it some times ago.)
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318318158

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[frozencemetery]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

frozencemetery commented:
"""
@fidencio it looks like it's been addressed.  Thanks for checking!
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318387652

[sssd PR#214][-Changes requested] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Changes requested

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
@frozencemetery. thanks for checking it out. I'll take over the review in the next few
days (unless I have an ACK from you ;-)).
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318480125

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[frozencemetery]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

frozencemetery commented:
"""
@fidencio I don't know the codebase well enough to give ack, sorry (just to complain
about krb5 bits 😄).
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-318673769

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
The way I've tested:

- sssd.conf
```
[domain/example.com]
...
id_provider = ad
...
```

- before the patch:
```
[root@master x86_64]# cat /var/lib/sss/pubconf/krb5.include.d/krb5_libdefaults
cat: /var/lib/sss/pubconf/krb5.include.d/krb5_libdefaults: No such file or directory
```
- after the patch:
```
[root@master x86_64]# cat /var/lib/sss/pubconf/krb5.include.d/krb5_libdefaults
 udp_preference_limit = 0
```
I've also ensure that before and after the patch there were no changes when using
id_provider = ipa.
```
[root@master x86_64]# cat /var/lib/sss/pubconf/krb5.include.d/krb5_libdefaults
 canonicalize = true
```

So, ACK!
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-319114562

[sssd PR#214][+Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Accepted

[sssd PR#214][-Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Accepted

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
Let me wait till CI is finished before actually setting the label to "Accepted"
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-319115064

[sssd PR#214][+Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Accepted

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
Whoever pushes those patches, please, add Robbie as a reviewer as well.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-319280225

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

jhrozek commented:
"""
I'm sorry, but this patch is incorrect. For the options to work, they must be
contained in the `libdefaults` section and with the current patch, they are not, because
the subsequent calls overwrite the previous contents (which included the libdefaults
section).

I (hopefully) fixed the patch in my udplimit branch:
https://github.com/jhrozek/sssd/tree/udplimit

With this patch, an IPA client only contains the canonicalize option (same as it did with
master) and an AD client contains a libdefault section with the UDP limit disabled.

And I also tested that, on the AD client, calling kinit then doesn't trigger any UDP
traffic, but only TCP.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-319951710

[sssd PR#214][+Changes requested] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Changes requested

[sssd PR#214][-Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Accepted

[sssd PR#214][synchronized] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

   URL: https://github.com/SSSD/sssd/pull/214
Author: celestian
 Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet
Action: synchronized

To pull the PR as Git branch:
git remote add ghsssd https://github.com/SSSD/sssd
git fetch ghsssd pull/214/head:pr214
git checkout pr214

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

jhrozek commented:
"""
OK, I force-pushed my changes. I'll run Coverity and CI now.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-319983393

[sssd PR#214][-Changes requested] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Changes requested

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[jhrozek]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

jhrozek commented:
"""
Coverity was clean btw
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-319992465

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
@jhrozek, sorry for the mistaken done during the first review.

This version is good :-)

Please, add yourself as reviewer as well.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320776197

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
CI has passed without failures.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320794202

[sssd PR#214][+Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Accepted

[sssd PR#214][-Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Accepted

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
Jenkins CI failed and also inter CI http://vm-058-233.$ABC/logs/job/72/81/summary.html

Therefore removing ACCEPTED label
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320910883

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
@lslebodn, the test which failed in your run is not related to this patch at all.

Also, just a previous run /job/72/80 passed without any failure.

I understand you would like to have the test fixed (and I totally agree with you here).
But blocking patches to be pushed because of unrelated failures is something that must be
discussed within the core developers before having it in practice.

I'm re-adding the "Accepted" label.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320920860

[sssd PR#214][+Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Accepted

[sssd PR#214][-Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Accepted

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
The only way how can you prove it is not related to PR is to explain why it fails or fix
it.
BTW it failed for me again: http://vm-058-233.$ABC/logs/job/72/84/debian_testing/ci.log

Therefore removing ACCEPTED label
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320968727

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
And passed:  72/82.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320974207

[sssd PR#214][+Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Accepted

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
@lslebodn, I've sent an email to sssd-devel mailing list about the test failure.

Let's keep this discussion there and, please, stop using this PR as a target of your
discontentment ... this is not the right place for that.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-320981976

[sssd PR#214][-Accepted] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: -Accepted

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
Do we test the same patch? It failed for me 3rd time in a row.
http://vm-058-233.$ABC/logs/job/72/96/summary.txt
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321215597

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
I'm testing the patch rebased on top of git master. All the times it passed.

Let me actually retest it here, just to be more than sure.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321216068

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
```
[ffidenci@pessoa sssd]$ git checkout t3254_master_krb5_snippet 
Switched to branch 't3254_master_krb5_snippet'
Your branch and 'celestian/t3254_master_krb5_snippet' have diverged,
and have 3 and 1 different commits each, respectively.
  (use "git pull" to merge the remote branch into yours)
```
```
[ffidenci@pessoa sssd]$ git remote update celestian
Fetching celestian
```
```
[ffidenci@pessoa sssd]$ git reset --hard celestian/t3254_master_krb5_snippet 
HEAD is now at 69c4c688e UTIL: Set udp_preference_limit=0 in krb5 snippet
```
```
[ffidenci@pessoa sssd]$ git remote update ghsssd
Fetching ghsssd
```
```
[ffidenci@pessoa sssd]$ git rebase ghsssd/master 
First, rewinding head to replay your work on top of it...
Applying: UTIL: Set udp_preference_limit=0 in krb5 snippet
```
```
[ffidenci@pessoa sssd]$ git push ci HEAD:master
Counting objects: 14, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (13/13), done.
Writing objects: 100% (14/14), 1.66 KiB | 1.66 MiB/s, done.
Total 14 (delta 13), reused 1 (delta 1)
remote: Queueing for rigorous / rhel7 rhel6 debian_testing fedora23 fedora22
fedora_rawhide fedora25 fedora24 fedora26:
remote:     master: 5b401e3 UTIL: Set udp_preference_limit=0 in krb5 snippet
remote: 
To ...
   eec0b39ed..5b401e35c  HEAD -> master
```
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321217056

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
And it just passed again: http://vm-058-233.$ABC/logs/job/72/97/summary.html
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321231365

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
> I'm testing the patch rebased on top of git master. All the times
> it passed.
>  
I do the same and it always fails for me. And I trust myself.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321233989

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[fidencio]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

fidencio commented:
"""
Thanks for implying that you do **not** trust myself.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321234650

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
>  Thanks for implying that you do not trust myself.
>  
I'm sorry but I cannot verify that you really used the same patch :-( (patches
welcome for improving it in internal CI). And it is weird that it works for you but does
not work for me.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321236287

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
>  Thanks for implying that you do not trust myself.
>  
I'm sorry but I cannot verify that you really used the same patch :-( (patches welcome
for improving it in internal CI). And it is weird that it works for you but does not work
for me.
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-321236287

[sssd PR#214][comment] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

lslebodn commented:
"""
http://vm-058-233.$ABC/logs/job/73/31/summary.html

master:
* 6bd6571dfe97fb9c6ce9040c3fcfb4965f95eda1
"""

See the full comment at https://github.com/SSSD/sssd/pull/214#issuecomment-322222626

[sssd PR#214][closed] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

   URL: https://github.com/SSSD/sssd/pull/214
Author: celestian
 Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet
Action: closed

To pull the PR as Git branch:
git remote add ghsssd https://github.com/SSSD/sssd
git fetch ghsssd pull/214/head:pr214
git checkout pr214

[sssd PR#214][+Pushed] UTIL: Set udp_preference_limit=0 in krb5 snippet

[lslebodn]

  URL: https://github.com/SSSD/sssd/pull/214
Title: #214: UTIL: Set udp_preference_limit=0 in krb5 snippet

Label: +Pushed