Soundcard detected but no sound... continued
by Darek Borkowski
Hi,
as written before I have FC3test2 ugraded everyday. Soundcard detected
but no sound even with newest kernel and other packages.
Below are some debugging info from my Laptop (Toshiba Sattelite 1135-S1554
Darek Borkowski
=================================
[root@kapsel ~]# system-config-soundcard
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 23 [74%] [on]
Front Right: Playback 23 [74%] [on]
Playing WAVE '/usr/share/system-config-soundcard/sound-sample.wav' :
Signed 16 b it Little Endian, Rate 44100 Hz, Stereo
aplay: pcm_write:1115: write error: Input/output error
[root@kapsel ~]# uname -r
2.6.9-1.649
[root@kapsel ~]# lsmod
Module Size Used by
i915 76869 3
parport_pc 24705 1
lp 11565 0
parport 41737 2 parport_pc,lp
autofs4 24005 0
i2c_dev 10433 0
i2c_core 22081 1 i2c_dev
sunrpc 160421 1
orinoco_cs 9545 1
orinoco 47053 1 orinoco_cs
hermes 7617 2 orinoco_cs,orinoco
ds 16965 7 orinoco_cs
dm_mod 54741 0
button 6481 0
battery 8517 0
ac 4805 0
yenta_socket 18753 1
pcmcia_core 59913 3 orinoco_cs,ds,yenta_socket
uhci_hcd 31449 0
ehci_hcd 31557 0
snd_intel8x0m 18185 0
snd_intel8x0 34829 2
snd_ac97_codec 64401 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 47609 0
snd_mixer_oss 17217 2 snd_pcm_oss
snd_pcm 97993 3 snd_intel8x0m,snd_intel8x0,snd_pcm_oss
snd_timer 29765 1 snd_pcm
snd_page_alloc 9673 3 snd_intel8x0m,snd_intel8x0,snd_pcm
gameport 4801 1 snd_intel8x0
snd_mpu401_uart 8769 1 snd_intel8x0
snd_rawmidi 26725 1 snd_mpu401_uart
snd_seq_device 8137 1 snd_rawmidi
snd 54053 12
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9889 2 snd
8139too 26305 0
mii 4673 1 8139too
ext3 116809 2
jbd 74969 1 ext3
[root@kapsel ~]# lspci
'00:00.0 Host bridge: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor
to I/O Controller (rev 01)
00:00.1 System peripheral: Intel Corp. 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 01)
00:00.3 System peripheral: Intel Corp. 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 01)
00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated
Graphics Device (rev 01)
00:02.1 Display controller: Intel Corp. 82852/855GM Integrated
Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem Controller (rev 03)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:02.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 01)
02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)
19 years, 5 months
Having constantly errors burning CD 3 & 4 of RC3
by Peter Boy
I'm unable to burn CD 3 & 4 of RC3 (i386) so that is passes the media
check process. I used 6 diferent media and 2 different burners, all
without success. MD4sum is OK for the downloaded files. Does anyone else
have this prob or did I miss some previous posts?
Peter
19 years, 5 months
IPv6
by Maciej Żenczykowski
Just a quick idea.
It would probably be useful to include a global 'disable/enable IPv6'
option in the installer.
Having IPv6 enabled causes Mozilla DNS lookups to take ages in some areas
- depends on DNS servers involved (basically it has to wait for IPv6
resolution to timeout).
This can be achieved by 'alias net-pf-10 off' in /etc/modprobe.conf or by
physically removing the IPv6 addresses from the interfaces (ip addr del
::1/128 dev lo; ip addr del <something> dev eth0;)
Comments?
Cheers,
MaZe.
19 years, 5 months
Nvidia Riva 128
by Phil Savoie
Hi All,
I have an old dell Dimension XPS R400 using the Riva 128 nvidia video
built-in card. I can't seem to get FC3T3 to properly configure the video.
It says that it can't find any screens and to be honest, I don't know where
to look to find how to configure the video. Any help would be really
appreciated.
Thank you,
Phil
19 years, 5 months
kernel provide 2.6.9. Too bad.
by Féliciano Matias
Here is the problem :
# rpm -q kernel
kernel-2.6.9-1.643.mat.1
kernel-2.6.9-1.649.mat.1
# rpm -q --provides kernel
kernel-drm = 4.3.0
kernel = 2.6.9-1.643.mat.1
kernel-drm = 4.3.0
kernel = 2.6.9-1.649.mat.1
# rpm -q --requires -p kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.i686.rpm
/bin/sh
/sbin/depmod
kernel = 2.6.9-1.649
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
# rpm -i kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.i686.rpm
error: Failed dependencies:
kernel = 2.6.9-1.649 is needed by kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.i686
This "error", is normal.
Install the "right" packages :
# rpm -i --fileconflicts(*) kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.643.mat.1.i686.rpm
# rpm -i --fileconflicts(*) kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.649.mat.1.i686.rpm
Try to remove a kernel (2.6.9-1.643.mat.1)
# rpm -e kernel-2.6.9-1.643.mat.1
error: Failed dependencies:
kernel = 2.6.9-1.643.mat.1 is needed by (installed) kernel-module-unicorn-atm-0.8.7-mat.1_2.6.9_1.643.mat.1.i686
This "error", is normal.
Add kernel-2.6.9-1.649
# rpm -i --fileconflicts(*) --oldpackage kernel-2.6.9-1.649.i686.rpm
Fine.
Try to remove a kernel (2.6.9-1.643.mat.1) again
# rpm -e kernel-2.6.9-1.643.mat.1
No error !
# find /lib/modules/2.6.9-1.643.mat.1/ -type f
/lib/modules/2.6.9-1.643.mat.1/kernel/extra/unicorn_pci_atm.ko
# rpm -q --provides kernel-2.6.9-1.649
kernel = 2.6.9 <===== Why ?
kernel-drm = 4.3.0
kernel = 2.6.9-1.649
Can you please remove "Provides: kernel = %{version}" from the kernel .spec file ?
Should I file this in bugzilla ?
(*) : Errr
19 years, 5 months
cdrecord not working
by Arangel Angov
Using FC3rc1. I get this:
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/cdwriter1'
devname: '/dev/cdwriter1'
scsibus: -2 target: -2 lun: -2
After this it just sits like that, I updated the package a while ago
just after it was avilable on up2date but it's still the same.
19 years, 5 months
FC3rc5 x86_64 probs: 3w-9xxx and vesa
by Jurgen Kramer
I just tried the x86_64 version of FC3rc5. The installation went really
smooth but after rebooting I could not get I normal graphical screen.
The screen appeared blurry (wrong res. or video memory region), this was
with the VESA driver. I had to use VESA because the nv driver doesn't
support my 6600GT. The vesa driver works perfectly under FC2.
Another problem is related to the 3ware 9xxx driver. It gives out
3w-9xxx: scsi0: ERROR: (0x03:0x0104): SGL entry has illegal
length:address=0x355D3000, length=0xFF, cmd=X.
errors. This does not happen with a kernel.org kernel.
Jurgen
--
19 years, 5 months
RC5: Dependencies everywhere!
by Rodolfo J. Paiz
Hey:
I seem to have some trouble burning recent Fedora CD's; I wonder if this
is a holdover from that kernel thing recently. I can get them to burn
well, but only at 2x whereas I've burned on this machine at 8x for over
two years now.
Installing my old test box (PPro/200, 64MB, 4GB) with FC1 booting from
floppy, then using GRUB to boot into the FC3-RC5 install and doing an
FTP install from a server on the LAN worked well. No hitches. Since I am
only doing a minimal install on this box right now, there are many
things which I cannot really test yet.
1. What happened to isdn4k-utils? Used to be around 3.5MB, now
installed it takes up over 9MB. Package size hasn't changed much, so I
don't understand what happened.
2. Why does rhpl require the synaptics driver? I would like to get rid
of all the graphical stuff on the minimal install, but rhpl requires
synaptics and a whole bunch of stuff requires rhpl. So in order to lose
some GUI packages, I have to lose up2date! And unless I lose up2date, I
have to keep about 20MB of stuff I don't need on a minimal install. Can
this dependency be eliminated somehow? Please?
3. Despite having *not* selected "Printing" packages during the
install, cups and a bunch of stuff is pulled in since it depends on
fontconfig, which depends on xorg-x11-libs, which needs synaptics, which
again needs rhpl which needs up2date. There is a *LOT* of stuff here
which cannot be deleted easily, and I don't understand why these
dependencies are there. Why, to delete cups, do I end up having to
delete up2date again?
4. If anyone just happens to have the chance to save me from a
reinstall on this old box, could I get the output from a "df" command
and a "rpm -qa | wc -l" command immediately after first booting a
minimal install? I forgot to write that data down for the HOWTO, and I'm
going to need it. If no one happens to get it, then I'll have to
reinstall this box just to be sure.
Cheers,
--
Rodolfo J. Paiz <rpaiz(a)simpaticus.com>
19 years, 5 months