test May 2007

test@lists.fedoraproject.org

175 participants
290 discussions

Re: Cound not boot with kernel-2.6.21-1.3125.fc7 , 2.6.21-1.3116.fc7 also gives problems ( was Re: problem with iwlwifi)
by Amit Rana 03 May '07

03 May '07

>Look at /etc/grub.conf and try changing the root= to the physical >partition, not the label. That's how I got it working here. I have two >/boot partitions (FC6 + F7t4) and tought that's what confused it. I am able to start booting process but the boot process itself hangs.

1 0

Re: problem after updating to libvirt-0.2.2-2.fc7
by Amit Rana 03 May '07

03 May '07

Hi, I am not quite sure what you mean by guest being windows. It was just my laptop (running fct4) and it was trying to get IP from broadband modem/router. Where does windows guest come into picture :) sorry very limited knowledge in this area. Does linux also support APIPA? >So it seems now it is all ok with latest libvirt version, isn't it? Yes, all is working fine now with latest libvirt. Thanks, Amit.

1 0

Re: problem after updating to libvirt-0.2.2-2.fc7
by Gianluca Cecchi 03 May '07

03 May '07

On Thu, 3 May 2007 11:11:54 +0530 Amit Rana wrote: > Yesterday I was getting some 169... IP although I am supposed to get > 192.168.0.10x hence I was not able to get on the network or access Just to notice that probably your guest is a windows machine and yesterday you got an APIPA ip address... See http://www.webopedia.com/TERM/A/APIPA.html and/or http://compnetworking.about.com/cs/protocolsdhcp/g/bldef_apipa.htm So it seems now it is all ok with latest libvirt version, isn't it?

1 0

Cound not boot with kernel-2.6.21-1.3125.fc7 , 2.6.21-1.3116.fc7 also gives problems ( was Re: problem with iwlwifi)
by Amit Rana 03 May '07

03 May '07

No, I couldnt boot with kernel-2.6.21-1.3125.fc7 at all. I was filing a bug report for 2.6.21-1.3116.fc7 not booting, can anyone advice what component does this bug go under? Thanks. Amit. Message: 2 Date: Wed, 02 May 2007 14:25:08 +0200 From: dragoran <drago01(a)gmail.com> Subject: Re: problem with iwlwifi To: For testers of Fedora Core development releases <fedora-test-list(a)redhat.com> Message-ID: <46388324.8050307(a)gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed >Amit Rana wrote: >> Hi, >> I have installed the new kernel but it didnt boot. It kept on hanging >> at one of the following message alternatively >> >> >> PCI: setting latency timer of device 0000:00:1c.3 to 64 >> PCI: setting latency timer of device 0000:00:1e.0 to 64 >> NET: Registered protocol family 2 >> >> ---------------------------- >> TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) >> TCP reno registered >> >> ------------------------- >> >> Anyway this is a common problem which I had been facing since start. >> First installer didnt start, even rescue disk's boot process hangs. I >> will create a new thread for this problem, will write again later if I >> am able to boot with the new kernel. >> >ok, have you also filled a bug? >> Regards, >> Amit. >>

2 1

Re: problem after updating to libvirt-0.2.2-2.fc7
by Amit Rana 02 May '07

02 May '07

Hi, Thanks for the response. I copied output of the ifconfig/route/brctl in 0.2.2-1 and then updated to 0.2.2-2 but noticed that everything is working fine. Yesterday I was getting some 169... IP although I am supposed to get 192.168.0.10x hence I was not able to get on the network or access internet. After googling a bit and looking at all the packages released on that day I assumed I am having virbr0 related problem hence downgraded to 0.2.2-1 and all worked fine. I was not doing anything related to networks, I was just fighting to get my X to work because of xorg-1.3 bug introduced on the same day. Thanks again for the response. Regards, Amit.

1 0

Intel 82801G ICH7 Sound no good in 3116
by Andy Lawrence 02 May '07

02 May '07

Kernel 2944 works fine, 3116 no sound!

1 0

Laptop not booting under the 2.6.20-1.3036 kernel
by Paul F. Johnson 02 May '07

02 May '07

Hi, I've installed and updated my son's laptop using the F7T3 dvd and it refuses to boot. It gets past grub, starts to load vmlinuz and then restarts. I've tried nopci and noprobe as command line options but it continually reboots. It's an old laptop - Compaq Presario 1246, but it should be able to handle things. The HD was installed originally on my laptop (x86) and transferred over - I've done this plenty of times in the past. If I put the drive back in my laptop, it boots fine. TTFN Paul -- Sie können mich aufreizen und wirklich heiß machen!

2 1

Problems with mounting usb-storage partitions?
by Michel Salim 02 May '07

02 May '07

I have been having these problems intermittently, and have not been able to ascertain the reason: on a computer with a USB mass storage device attached, logging into the desktop does not result in the drive being automounted by gnome-volume-manager. Symptoms: - After boot is complete, logging on to a console and doing 'dmesg | grep sd' does not list the external drives - After power-cycling one of the external drives, now udev picks *all* the external drives up, and creates device nodes for them - HAL (I'm guessing) does not necessarily sees all the drives. I have two drives, one a WDC MyBook external drive that is reliably mounted with FC6, and the other an Addonics drive cage that I use to mount an old laptop hard drive. All the Addonics partitions are mounted by g-v-m (including the Windows NTFS partition, with ntfs-3g), but I have to manually mount the MyBook's single ext3 partition. What gives? The volume label is "My Book", just in case it's the space that's causing the problem. Will bugzilla this, but would love a comment on whether this is a HAL-only bug, udev-only, both, or even mkinitrd (if usb-storage is not in the initrd again) Regards, -- Michel Salim http://hircus.wordpress.com/

2 2

More details on Ethernet unreliability
by Chuck Forsberg WA7KGX 02 May '07

02 May '07

Here is an lspci showing devices made with a 386 2869 kernel. 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) 05:07.0 Ethernet controller: 3Com Corporation 3cSOHO100-TX Hurricane (rev 30) 05:08.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 (rev 01) This is with the 3com controller on the third from the top PCI slot. I switched to a different Hurricane controller and installed it in the first slot. Still got the time out failure with x86_64 3104 kernel. I have now replaced the Hurricane controller with a gigabit controller. It has not bombed out yet but hasn't had much uptime. In the meantime Comcast has gone erratic so I haven't received any mail today.

1 0

F7T4 Gimp Acquire menu doesn't show xsane plugin
by Gerry Tool 02 May '07

02 May '07

I have xsane working fine with my Epson Perfection 4490 Photo scanner with iscan installed. [gerry@f7t4 ~]$ rpm -qa *xsane* xsane-0.994-3.fc7 xsane-gimp-0.994-3.fc7 I can scan fine with xsane and save the image, but the Gimp Acquire menu doesn't have an option to scan. This worked in F7T3. Any suggestions, or can anyone else confirm or counter this? Thanks. Gerry

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test May 2007