test April 2008

test@lists.fedoraproject.org

192 participants
404 discussions

rawhide report: 20080425 changes
by Fedora compose checker 25 Apr '08

25 Apr '08

Updated Packages: anaconda-11.4.0.76-1.fc9 ------------------------ * Thu Apr 24 2008 Chris Lumens <clumens(a)redhat.com> - 11.4.0.76-1 - Use the execWithCapture wrapper to be consistent. (jgranado) - Call the mdadm with full path. (jgranado) - Use the correct ls(1) alias. (dcantrell) - Set PS1 and ls(1) alias for tty2 shell. (dcantrell) - Lookinig for the capabilities file in xen is valid in more cases. (jgranado) - Avoid putting virtualization option when in Xen or VMware. (#443373) (jgranado) - If the stage2 image is on a CD, don't bother copying it (#441336). (clumens) - Once we've found the stage2 media on CD, always use it (#443736). (clumens) - Change mount point for CD to /mnt/stage2 when looking for stage2 (#443755). (clumens) - Switch to using 'yum clean all' to clean up after preupgrade (#374921) (katzj) - Handle .utf8 vs .UTF-8 (#443408) (katzj) - Avoid dividing by zero (#439160) (katzj) - Changes related to BZ #230949 (dcantrell) - $XORGDRIVERS no longer exists (markmc) - Bump version. (katzj) - Write IPv6 values to /etc/sysconfig/... correctly (#433290) (dcantrell) - Use the right base class for autopart handler. (clumens) blender-2.45-11.fc9.2 --------------------- * Thu Apr 24 2008 Jochen Schmitt <Jochen herr-schmitt de> 2.45-11.2 - Fix CVS-2008-1102 (#443937) cellwriter-1.3.3-1.fc9 ---------------------- * Thu Apr 24 2008 Jeremy Katz <katzj(a)redhat.com> - 1.3.3-1 - Update to 1.3.3 cryptsetup-luks-1.0.6-2.fc9 --------------------------- * Tue Apr 15 2008 Bill Nottinghm <notting(a)redhat.com> - 1.0.6-2 - Add the device to the luksOpen prompt (#433406) - Use iconv, not recode (#442574) event-compat-sysv-0.3.9-14.fc9 ------------------------------ * Thu Apr 24 2008 Bill Nottingham <notting(a)redhat.com> - 0.3.9-14 - Rework rc1, rcS, rcS-sulogin to use post-stop to avoid spurious 'rcS killed' messages (#444001) - Allow 's' for single-user mode (#443554) fedora-ds-base-1.1.0.1-4.fc9 ---------------------------- * Wed Apr 16 2008 Rich Megginson <rmeggins(a)redhat.com> - 1.1.0.1-4 - fix bugzilla 439829 - patch to allow working with NSS 3.11.99 and later hal-info-20080317-6.fc9 ----------------------- * Thu Apr 24 2008 Dan Williams <dcbw(a)redhat.com> - 20080317-6 - Add CDMA Novatel S620 initscripts-8.72-1 ------------------ * Thu Apr 24 2008 Bill Nottingham <notting(a)redhat.com> - 8.72-1 - don't have a S99single when using upstart (#444001, indirectly) * Wed Apr 23 2008 Bill Nottingham <notting(a)redhat.com> - 8.71-1 - adjust to gdm using LANG instead of GDM_LANG (#372151, <rstrode(a)redhat.com>) - rework netfs' check for networking availability to properly handle both network and NetworkManager libdhcp-1.99.8-1.fc9 -------------------- * Mon Apr 21 2008 David Cantrell <dcantrell(a)redhat.com> - 1.99.8-1 - Allow single network stack manual configuration information (#230949) libxslt-1.1.23-2.fc9 -------------------- * Mon Apr 21 2008 Daniel Veillard <veillard(a)redhat.com> 1.1.23-2.fc9 - revert a key initialization patch from 1.1.23 which seems broken see rhbz#442097 mksh-33d-1.fc9 -------------- * Sat Apr 12 2008 Robert Scheck <robert(a)fedoraproject.org> 33d-1 - Upgrade to 33d ntfsprogs-2.0.0-7.fc9 --------------------- * Thu Apr 24 2008 Tom "spot" Callaway <tcallawa(a)redhat.com> 2.0.0-7 - fix check_volume patch pam-1.0.1-2.fc9 --------------- * Tue Apr 22 2008 Tomas Mraz <tmraz(a)redhat.com> 1.0.1-2 - pam_selinux: restore execcon properly (#443667) * Fri Apr 18 2008 Tomas Mraz <tmraz(a)redhat.com> 1.0.1-1 - upgrade to new upstream release (one bugfix only) - fix pam_sepermit use in screensavers * Mon Apr 07 2008 Tomas Mraz <tmraz(a)redhat.com> 1.0.0-2 - fix regression in pam_set_item pavucontrol-0.9.6-1.fc9 ----------------------- * Fri Mar 28 2008 Lennart Poettering <lpoetter(a)redhat.com> 0.9.6-1 - Update to 0.9.6 rhgb-1:9.0.0-3.fc9 ------------------ * Thu Apr 24 2008 Bill Nottingham <notting(a)redhat.com> - 1:9.0.0-3 - as we're using inittab again, go back to reading it xine-lib-1.1.12-2.fc9 --------------------- * Thu Apr 24 2008 Rex Dieter <rdieter(a)fedoraproject.org> - 1.1.12-2 - CVE-2008-1878 (#443056) * Wed Apr 16 2008 Ville Skyttä <ville.skytta at iki.fi> - 1.1.12-1 - 1.1.12 (plugin ABI 1.21); qt, mkv, and pulseaudio patches applied upstream. * Wed Apr 09 2008 Ville Skyttä <ville.skytta at iki.fi> - 1.1.11.1-3 - Apply upstream fixes for Quicktime (#441705) and Matroska regressions introduced in 1.1.11.1. xorg-x11-server-1.4.99.901-26.20080415.fc9 ------------------------------------------ * Thu Apr 24 2008 Adam Jackson <ajax(a)redhat.com> 1.4.99.901-26.20080415 - xserver-1.5.0-no-evdev-keyboards-kthnx.patch: Disable evdev for keyboards even on combo devices. This means combo devices will go through the old mouse driver too. Oh well. (#440380) * Thu Apr 24 2008 Dave Airlie <airlied(a)redhat.com> 1.4.99.901-25.20080415 - xserver-1.5.0-f-spot-screws-glx.patch: stop GLX crashing X server when f-spot exists (#443299) * Wed Apr 23 2008 Dave Airlie <airlied(a)redhat.com> 1.4.99.901-24.20080415 - xserver-1.5.0-glcore-swap-no-crashy.patch: Fix issue with googleearth crashing GLcore. Broken deps for i386 ---------------------------------------------------------- kazehakase-0.5.0-1.fc9.2.i386 requires gecko-libs = 0:1.8.1.10 Broken deps for x86_64 ---------------------------------------------------------- kazehakase-0.5.0-1.fc9.2.x86_64 requires gecko-libs = 0:1.8.1.10 Broken deps for ppc ---------------------------------------------------------- kazehakase-0.5.0-1.fc9.2.ppc requires gecko-libs = 0:1.8.1.10 Broken deps for ppc64 ---------------------------------------------------------- kazehakase-0.5.0-1.fc9.2.ppc64 requires gecko-libs = 0:1.8.1.10 livecd-tools-015-1.fc9.ppc64 requires yaboot perl-Test-AutoBuild-darcs-1.2.2-3.fc9.noarch requires darcs >= 0:1.0.0 ppc64-utils-0.14-2.fc9.ppc64 requires yaboot

1 0

High definition video not working on Fedora 9?
by Valent Turkovic 25 Apr '08

25 Apr '08

Hi, I have some high-def video trailers I downloaded via azureus and I can't play them on F9 Preview (with all codecs installed). I have been running Rawhide for some time now and when I saw this bug I thought it could be something I did so I did a clean install of F9 Preview and installed fluendo codecs for totem, and also installed vlc and mplayer (with codecs) from livna. None player can play these mkv files that I can play without any problems under Fedora 8 with all of mentioned video players. I have Intel graphic chip: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) To reproduce this bug do this: 1. yum install azureus 2. start azureus 3. download some high-def video trailer (Iron Man for example) 4. install video player + codecs (vlc, mplayer, totem + fluendo codecs - take your pick) 5. play high-def video I get these errors: $ totem IronManTrailer2-1080p.mkv ** Message: Error: File "/usr/lib/gstreamer-0.10/libmch264dec.so.7.4.0.20778" could not be used. fluh264dec.c(414): gst_fluh264dec_setup (): /play/decodebin0/fluh264dec0: Could not open module: libstdc++.so.5: cannot open shared object file: No such file or directory (totem:9953): GStreamer-CRITICAL **: gst_object_unref: assertion `object != NULL' failed (totem:9953): GStreamer-CRITICAL **: gst_object_unref: assertion `object != NULL' failed (totem:9953): GStreamer-CRITICAL **: gst_object_unref: assertion `object != NULL' failed $ mplayer IronManTrailer2-1080p.mkv MPlayer SVN-r25979 rpm.livna.org (C) 2000-2007 MPlayer Team CPU: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz (Family: 6, Model: 14, Stepping: 12) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing IronManTrailer2-1080p.mkv. [mkv] Track ID 1: video (V_MPEG4/ISO/AVC), -vid 0 [mkv] Track ID 2: audio (A_VORBIS), -aid 0, -alang und [mkv] Will play video track 1. Matroska file format detected. VIDEO: [avc1] 1920x816 24bpp 23.952 fps 0.0 kbps ( 0.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 0.0 kbit/0.00% (ratio: 0->192000) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis decoder) ========================================================================== AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... VDec: vo config request - 1920 x 816 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 2.35:1 - prescaling to correct movie aspect. VO: [xv] 1920x816 => 1920x816 Planar YV12 [ASPECT] Warning: No suitable new res found! [ASPECT] Warning: No suitable new res found! [ASPECT] Warning: No suitable new res found! No bind found for key 'c'. % ??% ??,?% 0 0 X11 error: BadAlloc (insufficient resources for operation) X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation) X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 $ vlc IronManTrailer2-1080p.mkv VLC media player 0.8.6f Janus X Error of failed request: BadAlloc (insufficient resources for operation) Major opcode of failed request: 140 (XVideo) Minor opcode of failed request: 19 () Serial number of failed request: 89 Current serial number in output stream: 90 -- http://kernelreloaded.blog385.com/ linux, blog, anime, spirituality, windsurf, wireless registered as user #367004 with the Linux Counter, http://counter.li.org. ICQ: 2125241, Skype: valent.turkovic

3 3

Extra Extra read all about it - Preupgrade released....
by "Jóhann B. Guðmundsson" 25 Apr '08

25 Apr '08

http://fedoraproject.org/wiki/Interviews/PreUpgrade Will and Seth anything you would like to add to testers? BTW. Great work guys :) You can get preupgrade here... http://koji.fedoraproject.org/koji/packageinfo?packageID=6045 or do.. koji download-build --arch=noarch preupgrade-0.9-2.fc8 ( fc9 for fc9 ) rpm -ihv preupgrade-0.9-2.fc8.noarch.rpm If you have koji installed.. There's no use filing bugs just yet since this has not made it to the components list in bugzilla. ( correct me if I'm wrong I did not find it.. ) Claiming the first bug found :) Traceback (most recent call last): File "/usr/share/preupgrade/preupgrade-gtk.py", line 196, in on_assistant_apply self._do_main() File "/usr/share/preupgrade/preupgrade-gtk.py", line 204, in _do_main self.main_preupgrade() File "/usr/share/preupgrade/preupgrade-gtk.py", line 358, in main_preupgrade (mdev,mpath) = preupgrade.bootpath_to_anacondapath(self.pu.bootpath+"/"+stage2file) File "/usr/lib/python2.5/site-packages/preupgrade/__init__.py", line 119, in bootpath_to_anacondapath if dev.endswith(bootdev): TypeError: expected a character buffer object Best regards Johann B.

13 38

Can yum download to a pen-drive?
by Anne Wilson 25 Apr '08

25 Apr '08

On a laptop with the LiveCD install I have the problem that I can't network, as the PCMCIA card is not recognised. I have since found that the LiveCD itself can recognise and configure the card. That makes me wonder if I could a) install downloadonly onto the RAM-drive b) use downloadonly to yum the updates, saving them to a usb pen-drive Any advice on how this might be done? Thanks Anne

7 30

A good test of the F9pre-release would be to have livna and friends ready
by Leslie S Satenstein 25 Apr '08

25 Apr '08

Freshrpms, livna, et al need to be ready so we can do a full f9-prev test. I guess I can butcher the livna.repro to point to the 8 subdirectory, but all livna has to do is provide a soft link accessable from the web. Working lilly white slows things down. Fedora should be LillyWhite, but it would be nice to have livna ready for beta testing too.

7 11

coreutils is installed, cannot su -, and cannot add user still running as root
by Antonio Olivares 24 Apr '08

24 Apr '08

Dear all, I have run the updates on this machine, the fedora 7 machine updated to rawhide. I cannot add users and still cannot add users to troubleshoot errors. [root@localhost ~]# system-config-users The program 'system-config-users.py' received an X Window System error. This probably reflects a bug in the program. The error was 'BadName (named color or font does not exist)'. (Details: serial 91 error_code 15 request_code 45 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) [root@localhost ~]# system-config-users --sync The program 'system-config-users.py' received an X Window System error. This probably reflects a bug in the program. The error was 'BadName (named color or font does not exist)'. (Details: serial 91 error_code 15 request_code 45 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) [root@localhost ~]# rpm -qa coreutils coreutils-6.10-17.fc9.i386 [root@localhost ~]# I updated to today's rawhide report, and I get the following error message *** removed to save space **** (94/94): upstart-0.3.9-15 100% |=========================| 243 kB 00:00 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/sbin/vipw from install of shadow-utils-4.1.1-1.fc9.i386 conflicts with file from package util-linux-2.13-0.54.1.fc7.i386 file /usr/share/man/man8/vipw.8.gz from install of shadow-utils-4.1.1-1.fc9.i386 conflicts with file from package util-linux-2.13-0.54.1.fc7.i386 Error Summary ------------- So I ran it with [root@localhost ~]# ./nodep and got most of the updates. How can I fix this issue? Thanks, Antonio ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

2 2

no printing with gnome print dialog
by Joe Smith 24 Apr '08

24 Apr '08

If I try to print from Firefox (i.e. File > Print), or any other application that uses the new Gnome printer dialog (gedit, gimp), the "Print" button is disabled. If I select "Print to file", the "Print" button is enabled; switching back to an actual printer queue, it grays out again. Other apps that don't use the new dialog print just fine; CUPS is not showing any errors. Apps using (apparently) an older Gnome printing dialog, e.g. Applications > Accessories > Dictionary are able to print. Is there something I can try to figure out why the print button isn't activated? <Joe

3 6

Naming convention for packages
by Dominik Sandjaja 24 Apr '08

24 Apr '08

Hi, I was just wondering why the packages for Fedora 9 and even for Fedora 10 do have ".fc9" and ".fc10" in their names. Shouldn't it be ".f9" or, as that may be too late already, at least ".f10"? Given that the "Core" in the name was dropped quite a while ago ... Just wondering. Cheers, Dominik

4 4

X fights Global Warming!
by Patrick O'Callaghan 24 Apr '08

24 Apr '08

Just a quickie to note that since installing this morning's xorg-x11-server-Xorg-1.4.99.901-23.20080415.fc9.x86_64 the cpu temperature on my Core 2 Duo (with 965 chipset) running KDE has gone down by 5 degrees! Coincidence? I don't think so ... poc

2 1

Rawhide install report - qualified success
by G.Wolfe Woodbury 24 Apr '08

24 Apr '08

Did an install of Wednesday's rawhide (20080423) and can report a qualified success. The only problem I had was getting the correct method selected. I added "stage2=nfs:wolves.private:/srv/Fedora/development/i386/os/images/stage2.img" and "method=nfs:wolves.private:/srv/Fedora/development/i386/os/" to the boot command line (using boot.iso) and it proceeded correctly to the point of fetching the repodata. There it complained about not finding the right name. At htat point I chose to "Edit" and had to switch to an http: install because an nfs: url wasn't accepted that late in the game. Thereafter the install proceeded smothly and I now have FC9(rawhide) running on the testbed machine. Can someone point out where/why my method specification (above) didn't/couldn't work? I've also tried "askmethod" in the stage2 spec line and didn't get a dialog, just an error that let me edit and switch to an http: method. I will note that the http: method is apparently more robust and faster that it was on previous releases. (I used to get timeouts and hangs with the http: method.) For my testbed 686 box, the release is shaping up nicely, and if the LiveCD is any indication, the x86_64 should be okay also. -- G.Wolfe Woodbury

2 1

← Newer
1
...
5
6
7
8
9
10
11
...
41
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test April 2008