Package gnome-settings-daemon-2.22.1-0.2008.03.26.7.fc9.i386.rpm is not signed
by Arch Willingham
When trying to run yum update with the most recent version of F9, I get an error that says: "Package gnome-settings-daemon-2.22.1-0.2008.03.26.7.fc9.i386.rpm is not signed". The full text is shown below.
Any ideas?
Loaded plugins: refresh-packagekit
Cleaning up Everything
Loaded plugins: refresh-packagekit
livna-development | 2.1 kB 00:00
primary.sqlite.bz2 | 129 kB 00:00
fedora | 2.4 kB 00:00
primary.sqlite.bz2 | 6.1 MB 00:13
adobe-linux-i386 | 951 B 00:00
primary.xml.gz | 10 kB 00:00
adobe-linu: ################################################## 17/17
updates | 2.4 kB 00:00
primary.sqlite.bz2 | 6.1 MB 00:10
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package gnome-desktop.i386 0:2.22.1-3.fc9 set to be updated
---> Package gnome-settings-daemon.i386 0:2.22.1-0.2008.03.26.7.fc9 set to be updated
---> Package control-center.i386 1:2.22.1-3.fc9 set to be updated
---> Package control-center-filesystem.i386 1:2.22.1-3.fc9 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Updating:
control-center i386 1:2.22.1-3.fc9 fedora 2.7 M
control-center-filesystem i386 1:2.22.1-3.fc9 fedora 36 k
gnome-desktop i386 2.22.1-3.fc9 fedora 976 k
gnome-settings-daemon i386 2.22.1-0.2008.03.26.7.fc9 fedora 456 k
Transaction Summary
=============================================================================
Install 0 Package(s)
Update 4 Package(s)
Remove 0 Package(s)
Total download size: 4.1 M
Downloading Packages:
(1/4): gnome-desktop-2.22.1-3.fc9.i386.rpm | 976 kB 00:01
(2/4): control-center-filesystem-2.22.1-3.fc9.i386.rpm | 36 kB 00:00
(3/4): control-center-2.22.1-3.fc9.i386.rpm | 2.7 MB 00:06
(4/4): gnome-settings-daemon-2.22.1-0.2008.03.26.7.fc9.i | 456 kB 00:00
Package gnome-settings-daemon-2.22.1-0.2008.03.26.7.fc9.i386.rpm is not signed
Thanks!
Arch
16 years
Re: Fwd: For testers of Fedora Core development releases <fedora-test-list@redhat.com>
by Alan Cox
On Sun, Apr 27, 2008 at 05:21:01PM -0400, Marvin Stodolsky wrote:
> Zello Is considering 2) & 3) below. It would be good to have opinions
> on Legality of these approaches.
Ask lawyers about legality. There are legal folks willing to help on
the free software side. One obvious comment as a non-lawyer: It is normally
considered that to write a free driver having read non-free code (or a non
free one with a different licence) that you should have different people
writing the driver who haven't seen the original code using documentation
describing the device *not the code* from people who have (ie a 'clean room')
> 3) - we can move the usb driver in userspace (if it's possible, I did
> not try as I ain't got an usb modem to test), using /proc/bus/usb &
> libusb. There's no need to adhere to gpl if we stay in userland.
> Moreover, since libusb seems to be portable, it would be a step
> towards porting slusb & slmodem under *bsd and other unices. I don't
> know if I got the skills, but I got no modem to test, that's sure.
It should be possible. Linux 2.4 can't handle a few cases this way but
libusb and 2.6 should be able to drive pretty much any USB device sanely.
For #2 I guess it depends how easy it is to document the behaviour and
how complex the device behaviour is.
Alan
16 years
DC7700 boots 2.6.25 at last
by John Summerfield
and thanks to all who helped.
But what's this, and where should I report it?
WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 7MB of RAM.
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/mtrr/main.c:706
mtrr_trim_uncached_memory+0x132/0x19a() (Not tainted)
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.25-8.fc9.x86_64 #1
Call Trace:
[<ffffffff81034585>] warn_on_slowpath+0x60/0x91
[<ffffffff81463bee>] ? do_early_param+0x40/0x89
[<ffffffff8146c496>] mtrr_trim_uncached_memory+0x132/0x19a
[<ffffffff81469db0>] setup_arch+0x239/0x4ee
[<ffffffff8104eb0f>] ? clockevents_register_notifier+0x27/0x34
[<ffffffff81463930>] start_kernel+0x76/0x2f4
[<ffffffff814631d7>] _sinittext+0x1d7/0x1de
---[ end trace ca143223eefdc828 ]---
--
Cheers
John
-- spambait
1aaaaaaa(a)coco.merseine.nu Z1aaaaaaa(a)coco.merseine.nu
-- Advice
http://webfoot.com/advice/email.top.php
http://www.catb.org/~esr/faqs/smart-questions.html
http://support.microsoft.com/kb/555375
You cannot reply off-list:-)
16 years
FATAL: modpost: GPL-incompatible module slusb.ko uses GPL-only symbol 'usb_unlink_urb'
by Antonio Olivares
Dear all,
I have a smartlink based winmodem on my computer.
This is what I use to connect to the internet from my
home machine. I am a little bit concerned because the
slmodem-2.9.11-20080417 code does not compile under
kernel-2.6.25. When I try to compile I see the
following:
for
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/amrlibs.o
FATAL: modpost: GPL-incompatible module slusb.ko uses
GPL-only symbol
'usb_unlink_urb'
Is there a quick fix for this or an alternative that
will make the compilation succeed so that I and other
users with these kind of modems can continue using
Fedora?
Thank you in Advance,
Antonio
[olivares@localhost slmodem-2.9.11-20080417]$ make
KERNEL_VER=/lib/modules/`uname -r`/build
make -C modem all
make[1]: Entering directory
`/home/olivares/Downloads/slmodem-2.9.11-20080417/modem'
rebuild profile...
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_main.o -c modem_main.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_cmdline.o -c modem_cmdline.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o
-c modem.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_datafile.o -c
modem_datafile.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_at.o -c modem_at.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_timer.o -c modem_timer.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_pack.o -c modem_pack.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_ec.o -c modem_ec.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_comp.o -c modem_comp.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_param.o -c modem_param.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_debug.o -c modem_debug.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
homolog_data.o -c homolog_data.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
dp_sinus.o -c dp_sinus.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
dp_dummy.o -c dp_dummy.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
sysdep_common.o -c sysdep_common.c
gcc -o slmodemd modem_main.o modem_cmdline.o modem.o
modem_datafile.o
modem_at.o modem_timer.o modem_pack.o modem_ec.o
modem_comp.o
modem_param.o modem_debug.o homolog_data.o dp_sinus.o
dp_dummy.o
dsplibs.o sysdep_common.o
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o
modem_test.o -c modem_test.c
gcc -o modem_test modem_test.o modem_cmdline.o
modem.o
modem_datafile.o modem_at.o modem_timer.o
modem_pack.o modem_ec.o
modem_comp.o modem_param.o modem_debug.o
homolog_data.o dp_sinus.o
dp_dummy.o dsplibs.o sysdep_common.o
make[1]: Leaving directory
`/home/olivares/Downloads/slmodem-2.9.11-20080417/modem'
make -C drivers
KERNEL_DIR=/lib/modules/2.6.25-1.fc9.i686/build
make[1]: Entering directory
`/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers'
make modules -C /lib/modules/2.6.25-1.fc9.i686/build
SUBDIRS=/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers
make[2]: Entering directory
`/usr/src/kernels/2.6.25-1.fc9.i686'
CC [M]
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/amrmo_init.o
CC [M]
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/sysdep_amr.o
CC [M]
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/st7554.o
LD [M]
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/slamr.o
LD [M]
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/slusb.o
Building modules, stage 2.
MODPOST 2 modules
WARNING: could not find
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/.amrlibs.o.cmd
for
/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers/amrlibs.o
FATAL: modpost: GPL-incompatible module slusb.ko uses
GPL-only symbol
'usb_unlink_urb'
make[3]: *** [__modpost] Error 1
make[2]: *** [modules] Error 2
make[2]: Leaving directory
`/usr/src/kernels/2.6.25-1.fc9.i686'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/olivares/Downloads/slmodem-2.9.11-20080417/drivers'
make: *** [drivers] Error 2
I downloaded latest slmodem-2.9.11-20080417.tar.gz
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-2008041...
No problems yet, only when Fedora 9 comes out, as of
right now all is ok.
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
16 years
Silly question about panel
by Antonio M
For the first time after a long time the buttons showing running
applications on the lower panel disappeared and I can add only the
application switcher icon.
How do I get back my buttons???
--
Antonio Montagnani
Skype : antoniomontag
16 years
User Agent Switcher for Konqueror and AdBlock filters in KDE 4.0.3
by Antonio Olivares
Dear all,
In konqueror, I cannot use the User Agent Switcher. I
can only enter
http
when I click on the ":",
it stops. Good thing that Firefox allowed the use of
the Agent switcher, otherwise the feature would not be
available. For a good period of time, the feature was
unavailable and I used Opera to do what I needed to do
with pages that did not allow firefox and konqueror to
work.
One of the pages used to work without the agent up
until the release of KDE 4.0.X. When I visit the page
I see that the page does not work in "Netscape",
thinking that the browser is netscape. In
firefox/seamonkey, I used the agent switcher and it
worked fine, but with the firefox beta series, the
agent was unavailable.
Also
I use AdBlock filters to block ads on yahoo while
checking mail,
Settings --> Configure Konqueror --> AdBlock filters
I had these pages blocked.
http://ad.yieldmanager.com/*
http://us.ard.yahoo.com/*
http://ads.yimg.com/*
This works in KDE 3.5.X, but not in KDE 4.0.3. Is
there anything that can be done to make it work. Or
am I just in the minority and leave the issue alone.
Thank you in advance.
Regards,
Antonio
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
16 years
NetworkManager vpnc Fails
by Christopher A Williams
I just started testing NetworkManager vpnc (Cisco compatible client) on
F9 Preview and am getting nowhere fast. The same configuration works
just fin on my F8 system. On F9, NetworkManager prompts me for my
password, and then fails immediately with the message:
"The VPN Connection 'My VPN' failed because the VPN Service failed
unexpectedly."
Any ideas?
Cheers,
Chris
--
===========================
"If you are calm while all around you is chaos,
then you probably haven't fully understood
the magnitude of the situation."
--Unknown
16 years
Preview Release & NetworkManager
by John Poelstra
Two days ago I did an anaconda upgrade of latest F8 to Preview Release,
then did an additional update from rawhide. With F8 I used
NetworkManager exclusively to manage my wired and wireless connections.
Is this the expected behavior in F9?
1) Wired ethernet (eth0) does not take precedent over wireless even if
connected during boot time.
2) Wired ethernet, noted as "auto ethernet" is grayed out and cannot be
selected from the panel icon
And if this is the expected behavior (which seems like a regression to
me) how am I supposed to enable eth0?
I know eth0 is good because I just used it to enable rescue mode when I
lost grub after a failed resume from hibernate... good times!
John
16 years
Error starting domain: virDomainCreate() failed internal error QEMU quit during console startup
by John Summerfield
What does this mean and how do I fix it?
Here is the relevant log:
[root@potoroo log]# cat libvirt/qemu/RebuildKnoppix.log
/usr/bin/qemu-system-x86_64 -M pc -no-kqemu -m 256 -smp 2 -monitor pty
-boot c -hda /var/lib/xen/images/RebuildKnoppix.img
-cdrom /var/lib/xen/isos/debian-40r1-i386-DVD-1.iso -net
nic,macaddr=00:16:3e:52:3f:3f,vlan=0 -net
tap,fd=15,script=,vlan=0,ifname=vnet1 -usb -vnc 0.0.0.0:1
bind() failed
[root@potoroo log]#
This is the first time since f9alpha that I've been able to try this, it
used to work better than this.
16 years
mplayer does not work
by leorex
I installed mplayer from livna through yum, and it became very very
weird.
[leorex@localhost ~]$ mplayer
MPlayer SVN-r25979 rpm.livna.org (C) 2000-2007 MPlayer Team
CPU: AMD Sempron(tm) 2400+ (Family: 6, Model: 8, Stepping: 1)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
The flip-hebrew option can't be used in a config file.
Error parsing option flip-hebrew=no at line 133
[leorex@localhost ~]$ mplayer -h
MPlayer SVN-r25979 rpm.livna.org (C) 2000-2007 MPlayer Team
CPU: AMD Sempron(tm) 2400+ (Family: 6, Model: 8, Stepping: 1)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
The flip-hebrew option can't be used in a config file.
Error parsing option flip-hebrew=no at line 133
cannot even start properly.
anyone encounter same problem?
16 years
