of yum, nfs and starting from scratch
by Robert P. J. Day
as much as i'm not keen on putting any more time into testing f11
alpha, i figure that, since my two laptops are out and still plugged
in, i can start both of them from scratch and i'll take suggestions as
to *exactly* what operations i should do, and in what order, and i'll
record the results for my posterior. posterity. i meant posterity.
both laptops are gateway MX7120, with 64-bit AMD mobile athlon
processors, 512M onboard RAM plus another 512M on an expansion card.
i'll install 32-bit alpha in one and 64-bit in the other, and try to
duplicate my efforts on both systems to see if the installed arch
makes a difference as to when things explode into flame.
at the moment, i'm letting them both crank thru a memory test to
verify that it's not a memory issue. once i'm happy with that, i'll
do very much the same install as i've been doing all week -- it ends
up being somewhere between 1400 and 1500 packages total. once that's
done and the systems are rebooted, i'll take suggestions as to
predicsely what to test.
beyond the package selection, i'm going to go with the default
selections during the install process, so i'm not trying to do
anything fancy.
rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry:
Have classroom, will lecture.
http://crashcourse.ca Waterloo, Ontario, CANADA
========================================================================
15 years, 1 month
- 1
- 0
Rawhide mixer can't select CD in on ALC883
by Chuck Forsberg WA7KGX
On a Gigabyte ga-ep45-ud3p moherboard with Realtek alc883
codec, the mixer applet offers to select line-in, mic, or front mic
but not CD input.
--
Chuck Forsberg caf(a)omen.com www.omen.com 503-614-0430
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 FAX 629-0665
15 years, 1 month
- 1
- 0
gnome keyring asks for password @startup
by Antonio Olivares
Dear fellow testers,
I have a Toshiba laptop tracking rawhide and I have the wireless working beautifully(*knocks on wood*), however everytime I start the machine I get a prompt to enter the password by gnome-keyring or whatever it is called. If I don't enter the password, I can't connect to the wireless network(Network is encrypted and not open). Is there a way to tell it not to ask for it again and login automatically without prompting for the password?
Thank you in advance for your help.
BTW, in pre Fedora 7 whiles't installing a Test release I had used madwifi and the network was open back then, now it is encrypted and thankfully the Network adminstrator has successfully configured the machine for me. The ath5k/ath9k driver services the laptop and all is well, just I don't want to type the password each time.
Regards,
Antonio
15 years, 1 month
- 1
- 1
network service is not working : (Nvidia kernel trouble)
by Antonio Olivares
Dear list,
I have targeted down the troubles
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
[root@localhost ~]# service network status
Configured devices:
lo eth0 eth1
Currently active devices:
lo
[root@localhost ~]# uname -r
2.6.29-0.159.rc6.git3.fc11.i586
[root@localhost ~]# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... failed.
[FAILED]
Bringing up interface eth1: [ OK ]
You have new mail in /var/spool/mail/root
[root@localhost ~]# tail -f /var/log/messages
Feb 27 13:02:21 localhost dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Feb 27 13:02:32 localhost dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
Feb 27 13:02:51 localhost dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
Feb 27 13:03:06 localhost dhclient: No DHCPOFFERS received.
Feb 27 13:03:06 localhost kernel: eth1: setting half-duplex.
Feb 27 13:03:06 localhost kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Feb 27 13:03:11 localhost avahi-daemon[1993]: Joining mDNS multicast group on interface eth1.IPv4 with address 192.168.0.1.
Feb 27 13:03:11 localhost avahi-daemon[1993]: New relevant interface eth1.IPv4 for mDNS.
Feb 27 13:03:11 localhost avahi-daemon[1993]: Registering new address record for 192.168.0.1 on eth1.IPv4.
Feb 27 13:03:12 localhost ntpd[1869]: Listening on interface #5 eth1, 192.168.0.1#123 Enabled
^C
[root@localhost ~]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-0.159.rc6.git3.fc11.i586 (mockbuild(a)xenbuilder4.fedora.phx.redhat.com) (gcc version 4.4.0 20090219 (Red Hat 4.4.0-0.21) (GCC) ) #1 SMP Thu Feb 26 12:14:21 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffdf000 (ACPI data)
BIOS-e820: 000000002ffdf000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 2ffd0000 @ 10000-16000
Using x86 segment limits to approximate NX protection
RAMDISK: 2fc86000 - 2ffbfc47
ACPI: RSDP 000F97A0, 0014 (r0 ACPIAM)
ACPI: RSDT 2FFD0000, 0030 (r1 A M I OEMRSDT 11000325 MSFT 97)
ACPI: FACP 2FFD0200, 0081 (r2 A M I OEMFACP 11000325 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 2FFD03F0, 39BF (r1 A0007 A0007000 1 INTL 2002026)
ACPI: FACS 2FFDF000, 0040
ACPI: APIC 2FFD0390, 005E (r1 A M I OEMAPIC 11000325 MSFT 97)
ACPI: OEMB 2FFDF040, 0041 (r1 A M I OEMBIOS 11000325 MSFT 97)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ffd0000
low ram: 00000000 - 2ffd0000
bootmap 00011000 - 00016ffc
(9 early reservations) ==> bootmem [0000000000 - 002ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000fd6bac] TEXT DATA BSS ==> [0000400000 - 0000fd6bac]
#4 [002fc86000 - 002ffbfc47] RAMDISK ==> [002fc86000 - 002ffbfc47]
#5 [0000fd7000 - 0000fdc000] INIT_PG_TABLE ==> [0000fd7000 - 0000fdc000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002ffd0
HighMem 0x0002ffd0 -> 0x0002ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002ffd0
On node 0 totalpages: 196447
free_area_init_node: node 0, pgdat c0898400, node_mem_map c10003c0
DMA zone: 60 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3923 pages, LIFO batch:0
Normal zone: 2820 pages used for memmap
Normal zone: 189644 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 1351680 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193567
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0a9e000 soft=c0a7e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1913.350 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 2591 kB
per task-struct memory footprint: 1920 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 3930880 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 752564k/786240k available (3027k kernel code, 33056k reserved, 1919k data, 1672k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf07d0000 - 0xff3fe000 ( 236 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc08d9000 - 0xc0a7b000 (1672 kB)
.data : 0xc06f4e5a - 0xc08d4df0 (1919 kB)
.text : 0xc0400000 - 0xc06f4e5a (3027 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3826.70 BogoMIPS (lpj=1913350)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 17484 entries in 69 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) XP 2600+ stepping 00
APIC calibration not consistent with PM Timer: 98ms instead of 100ms
APIC delta adjusted to PM-Timer: 2079540 (2058464)
Brought up 1 CPUs
Total of 1 processors activated (3826.70 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=60 bytes
sizeof(inode)=648 bytes
sizeof(dentry)=164 bytes
sizeof(ext3inode)=916 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=5308 bytes
CPU0 attaching NULL sched-domain.
khelper used greatest stack depth: 2996 bytes left
net_namespace: 1240 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 18:58:24 Date: 02/27/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Denied BIOS AML access to invalid port 0x21+0x1 (PIC0)
ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [IRQM] [20081204]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
pci 0000:00:01.1: reg 10 io port: [0xef80-0xef9f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfe900000-0xfe900fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfea00000-0xfea00fff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
pci 0000:00:02.2: supports D1 D2
pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:04.0: reg 10 32bit mmio: [0xfe800000-0xfe800fff]
pci 0000:00:04.0: reg 14 io port: [0xeff0-0xeff7]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:06.0: reg 14 io port: [0xec00-0xec7f]
pci 0000:00:06.0: reg 18 32bit mmio: [0xfe700000-0xfe700fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:09.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:01:08.0: reg 10 io port: [0xdf00-0xdf3f]
pci 0000:01:08.0: reg 30 32bit mmio: [0xfbe00000-0xfbe0ffff]
pci 0000:00:08.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:08.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfe000000-0xfe01ffff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfe0fffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe3c00000-0xf3bfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *7
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10
ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 76, should be 6B [20081204]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMA-API: preallocated 8192 debug entries
DMA-API: debugging enabled by kernel config
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:07: iomem range 0xff780000-0xff7bffff has been reserved
system 00:0a: ioport range 0x480-0x487 has been reserved
system 00:0a: ioport range 0xd00-0xd07 has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x2fffffff could not be reserved
system 00:0d: iomem range 0xff7c0000-0xffffffff has been reserved
pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
pci 0000:00:08.0: IO window: 0xd000-0xdfff
pci 0000:00:08.0: MEM window: 0xfbd00000-0xfbefffff
pci 0000:00:08.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfe0fffff
pci 0000:00:1e.0: PREFETCH window: 0x000000e3c00000-0x000000f3bfffff
pci 0000:00:08.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 mem: [0x0-0x0]
pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfe0fffff]
pci_bus 0000:02: resource 2 mem: [0xe3c00000-0xf3bfffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3303k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1235761103.966:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
khelper used greatest stack depth: 2776 bytes left
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Created ptmx node in devpts ino 2
msgmni has been set to 1476
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:02:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Switched to high resolution mode on CPU 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart: Detected NVIDIA nForce2 chipset
agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
ehci_hcd 0000:00:02.2: setting latency timer to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
ehci_hcd 0000:00:02.2: irq 22, io mem 0xfeb00000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-0.159.rc6.git3.fc11.i586 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe900000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-0.159.rc6.git3.fc11.i586 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, high) -> IRQ 20
ohci_hcd 0000:00:02.1: setting latency timer to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xfea00000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29-0.159.rc6.git3.fc11.i586 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel(a)redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (12285 buckets, 49140 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 13:356:1000
pnp1: hash matches
rtc_cmos 00:02: hash matches
Freeing unused kernel memory: 1672k freed
Write protecting the kernel read-only data: 1448k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
setfont used greatest stack depth: 2736 bytes left
psmouse serio1: ID: 10 00 64<7>pata_amd 0000:00:09.0: version 0.4.1
pata_amd 0000:00:09.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
usb 2-2: new full speed USB device using ohci_hcd and address 2
ata1.00: ATA-7: MAXTOR STM3320620A, 3.AAD, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (17:120:0x11)
usb 2-2: New USB device found, idVendor=03f0, idProduct=0304
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DeskJet 810C
usb 2-2: Manufacturer: Hewlett-Packard
usb 2-2: SerialNumber: MY94M1621WGI
usb 2-2: configuration #1 chosen from 1 choice
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB03, max UDMA/33
ata2.01: ATAPI: SONY CD-RW CRX216E, PD01, max UDMA/33
ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc600c0c0) ACPI=0x701f (54:54:0x15)
ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc600c0c0) ACPI=0x701f (54:54:0x15)
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: CD-ROM SONY CD-RW CRX216E PD01 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 88x/48x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sr 1:0:1:0: Attached scsi generic sg2 type 5
modprobe used greatest stack depth: 800 bytes left
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1235761110.651:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 118978 rules.
SELinux: 8192 avtab hash slots, 118978 rules.
SELinux: 8 users, 13 roles, 2732 types, 120 bools, 1 sens, 1024 cats
SELinux: 74 classes, 118978 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1235761111.477:3): policy loaded auid=4294967295 ses=4294967295
udev: starting version 137
input: PC Speaker as /devices/platform/pcspkr/input/input5
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0304
usbcore: registered new interface driver usblp
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
forcedeth 0000:00:04.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, high) -> IRQ 22
forcedeth 0000:00:04.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
3c59x 0000:01:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, high) -> IRQ 18
3c59x: Donald Becker and others.
0000:01:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001df00.
eth0 (3c59x): not using net_device_ops yet
forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:0e:a6:42:59:af
forcedeth 0000:00:04.0: timirq lnktim desc-v1
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4300
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4340
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 21 (level, high) -> IRQ 21
Intel ICH 0000:00:06.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50690 usecs
intel8x0: clocking to 47398
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth0_rename to eth1
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
swap_cgroup: uses 1540 bytes of vmalloc for pointer array space and 1576960 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 1574328k swap on /dev/sda5. Priority:-1 extents:1 across:1574328k
swap_cgroup: uses 1504 bytes of vmalloc for pointer array space and 1540096 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 1540088k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-2 extents:1 across:1540088k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
pci 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, high) -> IRQ 18
[drm] Detected an NV30 generation card (0x034200a2)
[drm] Initialized nouveau 0.0.12 20060213 on minor 0
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
pci 0000:02:00.0: putting AGP V3 device into 8x mode
[drm] Allocating FIFO number 0
[drm] nouveau_fifo_alloc: initialised FIFO 0
[drm] Allocating FIFO number 1
[drm] nouveau_fifo_alloc: initialised FIFO 1
fuse init (API version 7.11)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
eth0: no link during initialization.
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: link up.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:461 check_unmap+0xf6/0x3d8() (Not tainted)
Hardware name: System product name
forcedeth 0000:00:04.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000001048ea72] [size=90 bytes]
Modules linked in: fuse nouveau drm sco bridge stp llc bnep l2cap bluetooth autofs4 sunrpc nf_conntrack_netbios_ns iptable_nat nf_nat ip6t_REJECT ip6table_filter ip6_tables ipv6 uinput snd_intel8x0 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss i2c_nforce2 3c59x i2c_core snd_pcm forcedeth mii snd_timer snd usblp pcspkr soundcore snd_page_alloc pata_ali sata_vsc sata_svw sata_via pata_pcmcia sata_nv ata_generic pata_acpi pata_amd [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.29-0.159.rc6.git3.fc11.i586 #1
Call Trace:
[<c042fe03>] warn_slowpath+0x7c/0xa7
[<c044e373>] ? find_usage_backwards+0xc8/0xea
[<c044e373>] ? find_usage_backwards+0xc8/0xea
[<c044ffed>] ? check_usage+0x29/0x20a
[<c044f686>] ? mark_lock+0x1e/0x30b
[<c054a200>] ? task_current_syscall+0x7a/0x8e
[<c054a2ee>] ? get_hash_bucket+0x26/0x2f
[<c054aa52>] check_unmap+0xf6/0x3d8
[<c0430313>] ? release_console_sem+0x1a9/0x1d6
[<c044f686>] ? mark_lock+0x1e/0x30b
[<c054aea1>] debug_dma_unmap_page+0x5b/0x63
[<c054aea1>] ? debug_dma_unmap_page+0x5b/0x63
[<f0eea3e6>] T.907+0x34/0x3f [forcedeth]
[<f0eea42c>] nv_tx_done+0x3b/0x187 [forcedeth]
[<f0eea61c>] nv_nic_irq+0xa4/0x238 [forcedeth]
[<c047105b>] handle_IRQ_event+0x22/0x58
[<c047247c>] handle_fasteoi_irq+0x80/0xb7
[<c04723fc>] ? handle_fasteoi_irq+0x0/0xb7
<IRQ> [<c04045ac>] ? common_interrupt+0x2c/0x40
[<c044fbc2>] ? trace_hardirqs_on+0xb/0xd
[<c041b94c>] ? native_safe_halt+0xa/0xc
[<c0409703>] ? default_idle+0x4f/0x89
[<c044ee6d>] ? trace_hardirqs_off+0xb/0xd
[<c0403010>] ? cpu_idle+0x72/0x92
[<c06df85f>] ? rest_init+0x53/0x55
---[ end trace 8157a52088604c67 ]---
eth0: no IPv6 routers present
eth1: setting half-duplex.
ADDRCONF(NETDEV_UP): eth1: link is not ready
I guess I need to open a bug, I see when I have a chance to do it. I believe it looks like a kernel oops.
Regards,
Antonio
15 years, 1 month
- 2
- 3
No more X on nv card: nVidia Corporation NV34 [GeForce FX 5200]
by Antonio Olivares
Dear fellow testers after updating to newer kernels or X drivers, I no longer have X working :(
I attach
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5xen i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.179.rc6.git5.fc11.i586 #1 SMP Mon Mar 2 10:19:32 EST 2009 i686
Build Date: 26 February 2009 07:51:07PM
Build ID: xorg-x11-server 1.6.0-2.fc11
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 2 20:02:23 2009
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@2:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default nouveau Device 0"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Builtin Default nouveau Screen 0"
Device "Builtin Default nouveau Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default nouveau Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nouveau Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default nouveau Device 0"
(==) No monitor specified for screen "Builtin Default nouveau Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.4.0
ABI class: X.Org Video Driver, version 5.0
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 02@00:00:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(--) NOUVEAU(0): Chipset: "NVIDIA NV34"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) NOUVEAU(0): Creating default Display subsection in Screen section
"Builtin Default nouveau Screen 0" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) NOUVEAU(0): Randr1.2 support enabled
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xE8000000
(--) NOUVEAU(0): MMIO registers at 0xFD000000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) NOUVEAU(0): [dri] Found DRI library version 1.3.0 and kernel module version 0.0.12
(II) NOUVEAU(0): Initial CRTC_OWNER is 4
(II) NOUVEAU(0): Attempting to load BIOS image from PROM
(II) NOUVEAU(0): ... appears to be valid
(II) NOUVEAU(0): BMP BIOS found
(II) NOUVEAU(0): BMP version 5.39
(II) NOUVEAU(0): Bios version 04.34.20.22
(II) NOUVEAU(0): Found Display Configuration Block version 2.2
(!!) NOUVEAU(0): Raw DCB entry 0: 01000300 000088b8
(!!) NOUVEAU(0): Raw DCB entry 1: 02010310 000088b8
(!!) NOUVEAU(0): Raw DCB entry 2: 02020321 00000003
(II) NOUVEAU(0): Loading NV17 power sequencing microcode
(--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xE947
(--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xEB4B
(--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xEC91
(--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xEE17
(--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xEE34
(--) NOUVEAU(0): Parsing VBIOS init table 5 at offset 0xEE51
(--) NOUVEAU(0): Parsing VBIOS init table 6 at offset 0xEFD5
(II) NOUVEAU(0): Found flat panel mode in BIOS tables:
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NOUVEAU(0): Output VGA-0 has no monitor section
(II) NOUVEAU(0): I2C bus "VGA-0" initialized.
(II) NOUVEAU(0): Output VGA-1 has no monitor section
(II) NOUVEAU(0): I2C bus "VGA-1" initialized.
(II) NOUVEAU(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) NOUVEAU(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): EDID for output VGA-0
(II) NOUVEAU(0): Manufacturer: HSD Model: 23a1 Serial#: 3121
(II) NOUVEAU(0): Year: 2008 Week: 32
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.651 redY: 0.332 greenX: 0.318 greenY: 0.569
(II) NOUVEAU(0): blueX: 0.147 blueY: 0.091 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported VESA Video Modes:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x870@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported Future Video Modes:
(II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): #4: hsize: 1024 vsize 768 refresh: 66 vid: 18017
(II) NOUVEAU(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) NOUVEAU(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) NOUVEAU(0): Supported additional Video Mode:
(II) NOUVEAU(0): clock: 106.5 MHz Image Size: 408 x 255 mm
(II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 71 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Serial No: 832NY1NA03121
(II) NOUVEAU(0): Monitor name: Hanns.G iF171
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff002264a123310c0000
(II) NOUVEAU(0): 201201030a251778eacbd5a655519125
(II) NOUVEAU(0): 175054bfef80818081c08140714f6146
(II) NOUVEAU(0): 9040950f01019a29a0d0518422305098
(II) NOUVEAU(0): 360098ff1000001e000000fd00374b18
(II) NOUVEAU(0): 470e000a202020202020000000ff0038
(II) NOUVEAU(0): 33324e59314e413033313231000000fc
(II) NOUVEAU(0): 0048616e6e732e472069463137310078
(II) NOUVEAU(0): EDID vendor "HSD", prod id 9121
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
(II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NOUVEAU(0): EDID vendor "HSD", prod id 9121
(II) NOUVEAU(0): Printing probed modes for output VGA-0
(II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): I2C device "VGA-1:E-EDID segment register" registered at address 0x60.
(II) NOUVEAU(0): I2C device "VGA-1:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): EDID for output VGA-1
(II) NOUVEAU(0): Output VGA-0 connected
(II) NOUVEAU(0): Output VGA-1 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output VGA-0 using initial mode 1440x900
(--) NOUVEAU(0): VideoRAM: 131072 kBytes
(==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NOUVEAU(0): Virtual size is 1440x1440 (pitch 1472)
(**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz)
(**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 71.6 MHz (scaled from 0.0 MHz), 52.7 kHz, 66.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (370, 230) mm
(**) NOUVEAU(0): DPI set to (98, 159)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables.
(II) NOUVEAU(0): [drm] framebuffer handle = 0x2d000000
(II) NOUVEAU(0): [drm] added 1 reserved context for kernel
(II) NOUVEAU(0): X context handle = 0x1
(II) NOUVEAU(0): [drm] installed DRM signal handler
Thanks,
Antonio
15 years, 1 month
- 3
- 7
Awesome Boot Display
by Chuck Forsberg WA7KGX
I was pleasantly surprised to see the solar theme boot display
after installing Rawhide on an ECS motherboard with
on board display. The Linux Desktop is showing signs of life.
The folks who would most appreciate this eye candy are mostly
NOT using wimp motherboard graphics.
When might we see this boot display with Nvidia cards?
--
Chuck Forsberg caf(a)omen.com www.omen.com 503-614-0430
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 FAX 629-0665
15 years, 1 month
- 7
- 7
fedora 11 alpha nfs not listening on udp port 2049?
by Robert P. J. Day
for the first time, i'm trying to boot an embedded system via NFS
mounting its root fs from my f11 alpha system, and the attempt to
mount that root fs simply hangs. invoking tcpdump shows continuous
diagnostics claiming that, on the server side, "udp port nfs
unreachable."
sure enough, even though "service nfs start" worked fine, running
"netstat -an" shows nothing listening on port 2049 on the server.
however, "ps -ef" shows multiple [nfsd] processes (threads?) running.
that would explain it if nothing is listening on port 2049. on
another system here that acts very nicely as an NFS server (running
RHEL4), if i run "netstat -an", i can see both a UDP and TCP listener
on that port, plus numerous established connections from clients
mounting.
but on f11 alpha ... nothing. where went port 2049?
rday
--
p.s. yes, it's been a very alpha kind of day.
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry:
Have classroom, will lecture.
http://crashcourse.ca Waterloo, Ontario, CANADA
========================================================================
15 years, 1 month
- 5
- 19
today's F10 updates, PackageKit showing double
by Michael Cronenworth
Today's updates totaled 11 on my laptop, but PackageKit wanted to say I
had 12. system-config-date is listed twice. I can't seem to find an open
bug on this, and I have screenshot proof if anyone doubts it.
Yes, I tried hitting "Refresh" but it still shows that package twice.
All the other packages are listed once. "yum check-update" only shows 11
updates and system-config-date is listed once.
Anyone else seeing this?
15 years, 1 month
- 6
- 9
Beware today's updates - selinux is changing home user contexts
by mike cloaked
I have just updated some f10 boxes a few minutes ago. On logging on again
after rebooting to the new kernel this evening, the main user directories
have had their contexts changed to usr_t so I presume some kind of
relabelling has been done - but not correctly! After restorecon -vR
/home/user the contexts have mostly reverted to where they should be - I
initially noticed because ssh suddenly started demanding a passphrase when
it should not need one - and then I noted avc denials.....
I hope not too many users are going to have their home directories messed up
as a result! The relevant update is
selinux-policy-targeted-3.5.13-46.fc10.noarch.rpm
This is not good - especially for a stable release!
--
View this message in context: http://www.nabble.com/Beware-today%27s-updates---selinux-is-changing-home...
Sent from the Fedora Test List mailing list archive at Nabble.com.
15 years, 1 month
- 7
- 8
QA review for feature pages - Help get new features into Fedora!
by Will Woods
Hi folks,
The feature freeze is coming soon[1], and that means we need to check to
make sure all the new ans exciting features coming in F11 are
"testable".
Here's a list of all the F11-approved features that haven't been
reviewed yet:
https://fedoraproject.org/wiki/Category:Features_needing_QA_approval
The wiki pages should tell you a bit more, but basically, we need to
make sure that each feature has two major things:
1) Scope
The Scope section is supposed to list the *complete* set of changes to
be made, features to be added, etc. Basically: it needs to tell you
what's going to change - what packages, what config files, and so on.
If the Scope section is vague, incomplete or missing, add this to the
bottom of the Feature page:
[[Category:Features with incomplete scope]]
And add a comment on the 'discussion' page. Be sure to put "--~~~~" at
the end of your comment - this will add a signature for you.
2) How To Test
This part should tell you how to check everything listed in the Scope
section. It should have a complete list of detailed instructions that
you (or I or anyone on fedora-test-list) can follow to test the feature.
If you can't follow the directions in the How To Test section to confirm
whether or not the Feature is working, add this to the bottom of the
Feature page:
[[Category:Features with incomplete test plans]]
And add a comment on the discussion page, as mentioned above.
If both these sections are complete and accurate and useful, add:
[[Category:QA approved feature pages]]
to the bottom of the page.
This information will be used to decide which features are ready for F11
and which ones aren't. If there's a feature you're keen to see in F11,
you can help - go review its feature page!
If the scope or test plan are incomplete, *please* ask the feature owner
what they're changing and how you can test it. You can help them write
those sections, which helps everyone else test *and* helps FESCo decide
whether to keep the feature or not. Everyone's a winner!
Thanks!
-w
[1] https://fedoraproject.org/wiki/Releases/11/Schedule
15 years, 1 month
- 4
- 4