On Mon, 2019-05-27 at 10:00 -0600, Chris Murphy wrote:
On Mon, May 27, 2019 at 8:20 AM stan <upaitag(a)zoho.com> wrote:
> On Sun, 26 May 2019 23:20:08 -0700
> Samuel Sieb <samuel(a)sieb.net> wrote:
>
> > If you are booting in UEFI mode, then yes, they are required. If you
> > don't want that, you need to boot in legacy or CSM mode.
>
> Thanks for the tip. That enables me to see the problem, but not how to
> correct it. The boot stanza for the iso uses linuxefi and initrdefi.
> I can edit the stanza just like a regular boot, but if I try to change
> those to linux16 or initrd16, the default on my system, they are not
> found. I tried linux too, just in case it had been made generic, but no
> go. My experience was that no matter how I tried to bypass the efi
> boot, I did not succeed. I looked at the rest of the suboptions
> available, and there wasn't one obvious to my eye that implied an
> override of the efi boot.
>
> Do you have further insight that will enable me to bypass this hurdle?
That you get GRUB from installation media tells me your computer is
presenting itself as having UEFI firmware, because on computers with
BIOS firmware the installation media will use isolinux as the
bootloader, not GRUB. If the firmware is UEFI, GPT partitioning is
required (same as Windows) by the installer. It's been this way since
forever, at least Fedora 18.
Right. Nothing has changed in the media here AFAIK. If you boot from
the firmware to the Fedora install media in a UEFI-native way, the
installer will boot UEFI-native and require you to do a UEFI-native
install. If you boot from the firmware to the Fedora install media in a
BIOS-native way, the installer will boot BIOS-native and require you to
do a BIOS-native install.
This isn't something we (Fedora) control, it's between you and your
system's firmware. Either you aren't writing your install media and/or
booting them quite the same as you did before, or your firmware's
configuration has changed somehow from preferring BIOS-native boot to
UEFI-native boot. You should be able to find a way to do a BIOS-native
boot in the firmware UI somewhere, though.
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net