Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet nomodeset SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) BIOS-e820: 00000000bff80000 - 00000000bff8f000 (ACPI data) BIOS-e820: 00000000bff8f000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.5 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FC0000000 write-back 2 base 0C0000000 mask FC0000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 4GB, range: 1GB, type WB reg 2, base: 3GB, range: 1GB, type UC total RAM coverred: 4096M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbff80 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bff80000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bff80000 page 4k kernel direct mapping tables up to bff80000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 13000-19000 RAMDISK: 374ec000 - 37fef647 ACPI: RSDP 00000000000f9330 00024 (v02 ACPIAM) ACPI: XSDT 00000000bff80100 00084 (v01 _ASUS_ Notebook 20090901 MSFT 00000097) ACPI: FACP 00000000bff80290 000F4 (v03 090109 FACP0913 20090901 MSFT 00000097) ACPI: DSDT 00000000bff80680 0B8A7 (v01 N80Vc N80Vc208 00000208 INTL 20051117) ACPI: FACS 00000000bff8f000 00040 ACPI: APIC 00000000bff80390 0005C (v01 090109 APIC0913 20090901 MSFT 00000097) ACPI: MCFG 00000000bff80430 0003C (v01 090109 OEMMCFG 20090901 MSFT 00000097) ACPI: SLIC 00000000bff80470 00176 (v01 _ASUS_ Notebook 20090901 MSFT 00000097) ACPI: ECDT 00000000bff80620 00054 (v01 090109 OEMECDT 20090901 MSFT 00000097) ACPI: DBGP 00000000bff803f0 00034 (v01 090109 DBGP0913 20090901 MSFT 00000097) ACPI: BOOT 00000000bff805f0 00028 (v01 090109 BOOT0913 20090901 MSFT 00000097) ACPI: OEMB 00000000bff8f040 00071 (v01 090109 OEMB0913 20090901 MSFT 00000097) ACPI: HPET 00000000bff8bf30 00038 (v01 090109 OEMHPET 20090901 MSFT 00000097) ACPI: DMAR 00000000bff8f0c0 00108 (v01 090109 DMAR0913 20090901 MSFT 00000097) ACPI: ATKG 00000000bff8f3d0 08024 (v01 090109 OEMATKG 20090901 MSFT 00000097) ACPI: SSDT 00000000bff97f20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [0000000000014000 - 0000000000029fff] bootmap [000000000002a000 - 0000000000051fff] pages 28 (8 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019adb00] TEXT DATA BSS ==> [0001000000 - 00019adb00] #3 [00374ec000 - 0037fef647] RAMDISK ==> [00374ec000 - 0037fef647] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [00019ae000 - 00019ae240] BRK ==> [00019ae000 - 00019ae240] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000bff80 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1048334 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3822 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767928 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000 PM: Registered nosave memory: 00000000000e1000 - 0000000000100000 PM: Registered nosave memory: 00000000bff80000 - 00000000bff8f000 PM: Registered nosave memory: 00000000bff8f000 - 00000000bffe0000 PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000 PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:3ed20000) NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages at ffff880028022000, static data 90080 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030310 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet nomodeset SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 4114260k/5242880k available (4227k kernel code, 1049544k absent, 79076k reserved, 2926k data, 1324k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2394.027 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.05 BogoMIPS (lpj=2394027) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20852 entries in 82 pages DMAR:Host address width 36 DMAR:DRHD base: 0x000000fed90000 flags: 0x0 IOMMU fed90000: ver 1:0 cap c9008020e30260 ecap 1000 DMAR:DRHD base: 0x000000fed93000 flags: 0x1 IOMMU fed93000: ver 1:0 cap c9008020630260 ecap 1000 DMAR:RMRR base: 0x000000000e1000 end: 0x000000000e3fff DMAR:RMRR base: 0x000000bfff0000 end: 0x000000bfffffff DMAR:No ATSR found Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.75 BogoMIPS (lpj=2393875) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9575.80 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=776 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=6008 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 14:27:09 Date: 11/25/09 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI Warning: Incorrect checksum in table [ATKG] - 42, should be F5 20090521 tbutils-246 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9fff000-0xf9fff7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfdefffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdff0000-0xfdffffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfe9fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf6000000-0xf8efffff] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:06:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff] pci 0000:06:00.0: reg 20 64bit mmio: [0xf8fe0000-0xf8feffff] pci 0000:06:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] pci 0000:07:03.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold pci 0000:07:03.0: PME# disabled pci 0000:07:03.1: reg 10 32bit mmio: [0xfebff400-0xfebff4ff] pci 0000:07:03.1: supports D1 D2 pci 0000:07:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.1: PME# disabled pci 0000:07:03.2: reg 10 32bit mmio: [0xfebff000-0xfebff0ff] pci 0000:07:03.2: supports D1 D2 pci 0000:07:03.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.2: PME# disabled pci 0000:07:03.3: reg 10 32bit mmio: [0xfebfec00-0xfebfecff] pci 0000:07:03.3: supports D1 D2 pci 0000:07:03.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.3: PME# disabled pci 0000:07:03.4: reg 10 32bit mmio: [0xfebfe800-0xfebfe8ff] pci 0000:07:03.4: supports D1 D2 pci 0000:07:03.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *6) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default IOMMU 0xfed90000: using Register based invalidation IOMMU 0xfed93000: using Register based invalidation IOMMU: software identity mapping for device 0000:01:00.0 IOMMU: Setting RMRR: IOMMU: Setting identity map for device 0000:00:1d.0 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xbfff0000 - 0xc0000000] IOMMU: Setting identity map for device 0000:00:1d.0 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xe1000 - 0xe4000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xe1000 - 0xe4000] IOMMU: Prepare 0-16MiB unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 PCI-DMA: Intel(R) Virtualization Technology for Directed I/O hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x400-0x41f has been reserved system 00:08: ioport range 0x500-0x57f has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved system 00:08: iomem range 0xfff00000-0xffffffff has been reserved system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved system 00:0c: ioport range 0x250-0x253 has been reserved system 00:0c: ioport range 0x256-0x25f has been reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved system 00:0c: iomem range 0xfec20000-0xfec27fff has been reserved system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0xd000-0xdfff pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe9fffff pci 0000:00:1c.2: PREFETCH window: 0x000000f6000000-0x000000f8efffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.5: IO window: 0xe000-0xefff pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.5: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfdefffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe9fffff] pci_bus 0000:04: resource 2 pref mem [0xf6000000-0xf8efffff] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff] pci_bus 0000:06: resource 2 pref mem [0xf8f00000-0xf8ffffff] pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11277k freed Simple Boot Flag at 0x51 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1259159229.436:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 8057 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:01.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.0: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.1: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 29 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.2: irq 29 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 30 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: Using ACPI for slot detection. pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0 pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver acpiphp_glue: Slot 1 already registered by another hotplug driver ACPI: AC Adapter [AC0] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Lid Switch [LID] ACPI: SSDT 00000000bff974d0 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 00000000bff977b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switched to high resolution mode on CPU 0 ACPI: CPU0 (power states: C1[C1] C2[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 00000000bff97400 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) ACPI: SSDT 00000000bff97720 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) Switched to high resolution mode on CPU 1 ACPI: CPU1 (power states: C1[C1] C2[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (32 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 ahci 0000:00:1f.2: version 3.0 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 31 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: irq 31 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 31 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 31 ata3: DUMMY ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 31 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 1:321:486 rtc_cmos 00:03: setting system clock to 2009-11-25 14:27:09 UTC (1259159229) Initalizing network drop monitor service ACPI: Battery Slot [BAT0] (battery present) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: ST9320421AS, SD14, max UDMA/133 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9320421AS SD14 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk usb 2-5: new high speed USB device using ehci_hcd and address 2 Clocksource tsc unstable (delta = -254509068 ns) usb 2-5: New USB device found, idVendor=04f2, idProduct=b071 usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-5: Product: CNF7129 usb 2-5: Manufacturer: Chicony Electronics Co., Ltd. usb 2-5: SerialNumber: SN0001 usb 2-5: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded ata2.00: ATAPI: MATSHITADVD-RAM UJ870BJ, 1.02, max UDMA/33 ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870BJ 1.02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ata6: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 1324k freed Write protecting the kernel read-only data: 6344k dracut: dracut-002-13.4.git8f397a9b.fc12 udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096600c1) [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 usb 5-1: New USB device found, idVendor=0b05, idProduct=1751 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: BT-253 usb 5-1: Manufacturer: Broadcom Corp usb 5-1: SerialNumber: 002243C57941 usb 5-1: configuration #1 chosen from 1 choice dracut: Starting plymouth daemon acpi device:1e: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/device:1a/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: New USB device found, idVendor=08ff, idProduct=1600 usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 5-2: Product: Fingerprint Sensor usb 5-2: configuration #1 chosen from 1 choice dracut: Scanning devices sda5 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "VolGroup00" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "VolGroup00" now active SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem dm-0 Ending clean XFS mount for filesystem: dm-0 dracut: Mounted root filesystem /dev/mapper/VolGroup00-LogVol00 dracut: Switching root udev: starting version 145 asus_laptop: Asus Laptop Support version 0.42 asus_laptop: N80Vn model detected input: Asus Laptop extra buttons as /devices/virtual/input/input7 asus_laptop: Brightness ignored, must be controlled by ACPI video driver iTCO_vendor_support: vendor-support=0 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:07:03.2 [1180:0843] (rev 12) ricoh-mmc: Controller is now disabled. cfg80211: Calling CRDA to update world regulatory domain firewire_ohci 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.0 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:06:00.0: setting latency timer to 64 alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 r8169 0000:06:00.0: irq 32 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc9001112c000, 00:24:8c:0b:cc:4b, XID 3c4000c0 IRQ 32 sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22) sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA Linux video capture interface: v2.00 firewire_core: created device fw0: GUID 001e8c00018dd2c7, S400 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 33 on node 0 alloc kstat_irqs on node 0 HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071) ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ath9k 0000:03:00.0: setting latency timer to 64 input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ath: EEPROM regdomain: 0x60 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x60 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 phy0: Selected rate control algorithm 'ath9k_rate_control' Registered led device: ath9k-phy0::radio Registered led device: ath9k-phy0::assoc Registered led device: ath9k-phy0::tx Registered led device: ath9k-phy0::rx phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xffffc900111a0000, irq=17 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009 device-mapper: multipath: version 1.1.0 loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2097144k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2097144k