Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.5-117.fc10.i586 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 11:43:59 EST 2008 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffae000 (usable) BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) last_pfn = 0x3ffae max_arch_pfn = 0x100000 kernel direct mapping tables up to 38000000 @ 7000-c000 Using x86 segment limits to approximate NX protection RAMDISK: 3ef30000 - 3ff8d6d6 Allocated new RAMDISK: 00975000 - 019d26d6 Move RAMDISK from 000000003ef30000 - 000000003ff8d6d5 to 00975000 - 019d26d5 DMI 2.3 present. ACPI: RSDP 000FDF00, 0014 (r0 DELL ) ACPI: RSDT 3FFF0000, 002C (r1 DELL CPi R 27D3091E ASL 61) ACPI: FACP 3FFF0400, 0074 (r1 DELL CPi R 27D3091E ASL 61) ACPI: DSDT 3FFF0C00, 2CF6 (r1 INT430 SYSFexxx 1001 MSFT 100000E) ACPI: FACS 3FFFF800, 0040 ACPI: BOOT 3FFF07C0, 0028 (r1 DELL CPi R 27D3091E ASL 61) 127MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097016c] TEXT DATA BSS ==> [0000400000 - 000097016c] #4 [0000971000 - 0000975000] INIT_PG_TABLE ==> [0000971000 - 0000975000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000975000 - 00019d26d6] NEW RAMDISK ==> [0000975000 - 00019d26d6] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0003ffae Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003ffae On node 0 totalpages: 261965 free_area_init_node: node 0, pgdat c07f1900, node_mem_map c19d3000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 32430 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (021d7000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000) PERCPU: Allocating 41372 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259917 Kernel command line: initrd=initrd.img rescue BOOT_IMAGE=vmlinuz Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c089d000 soft=c087d000 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1295.788 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1016056k/1048248k available (2730k kernel code, 31492k reserved, 1418k data, 412k init, 130744k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0813000 - 0xc087a000 ( 412 kB) .data : 0xc06aab0e - 0xc080d610 (1418 kB) .text : 0xc0400000 - 0xc06aab0e (2730 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 2591.57 BogoMIPS (lpj=1295788) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20080609 ACPI: setting ELCR to 0200 (from 0800) weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (2591.57 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3264 bytes CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 20:02:26 Date: 09/11/09 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e7ffffff] PCI: 0000:00:1d.0 reg 20 io port: [bf80, bf9f] PCI: 0000:00:1d.1 reg 20 io port: [bf40, bf5f] PCI: 0000:00:1d.2 reg 20 io port: [bf20, bf3f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4fffc00, f4ffffff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7] PCI: 0000:00:1f.1 reg 18 io port: [170, 177] PCI: 0000:00:1f.1 reg 1c io port: [374, 377] PCI: 0000:00:1f.1 reg 20 io port: [bfa0, bfaf] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff] PCI: 0000:00:1f.5 reg 10 io port: [b800, b8ff] PCI: 0000:00:1f.5 reg 14 io port: [bc40, bc7f] PCI: 0000:00:1f.5 reg 18 32bit mmio: [f4fff800, f4fff9ff] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [f4fff400, f4fff4ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled PCI: 0000:00:1f.6 reg 10 io port: [b400, b4ff] PCI: 0000:00:1f.6 reg 14 io port: [b080, b0ff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled PCI: 0000:01:00.0 reg 10 32bit mmio: [fc000000, fcffffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [80000000, 8001ffff] PCI: bridge 0000:00:01.0 io port: [c000, cfff] PCI: bridge 0000:00:01.0 32bit mmio: [fc000000, fdffffff] PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, dfffffff] PCI: 0000:02:00.0 reg 10 32bit mmio: [faffe000, faffffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: 0000:02:01.0 reg 10 32bit mmio: [0, fff] pci 0000:02:01.0: supports D1 pci 0000:02:01.0: supports D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled PCI: 0000:02:01.1 reg 10 32bit mmio: [faffd800, faffdfff] PCI: 0000:02:01.1 reg 14 32bit mmio: [faff8000, faffbfff] pci 0000:02:01.1: supports D1 pci 0000:02:01.1: supports D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot pci 0000:02:01.1: PME# disabled PCI: 0000:02:03.0 reg 10 32bit mmio: [faffc000, faffcfff] pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [d000, efff] PCI: bridge 0000:00:1e.0 32bit mmio: [f6000000, fbffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xf400-0xf4fe has been reserved system 00:03: ioport range 0x880-0x8bf has been reserved system 00:03: ioport range 0x8c0-0x8df has been reserved system 00:03: ioport range 0x8e0-0x8ff has been reserved system 00:08: ioport range 0x900-0x97f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: 0x00d000-0x00d0ff pci 0000:02:01.0: IO window: 0x00d400-0x00d4ff pci 0000:02:01.0: PREFETCH window: 0x50000000-0x53ffffff pci 0000:02:01.0: MEM window: 0x58000000-0x5bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xd000-0xefff pci 0000:00:1e.0: MEM window: 0xf6000000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: enabling device (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [c000, cfff] bus: 01 index 1 mmio: [fc000000, fdffffff] bus: 01 index 2 mmio: [d0000000, dfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [d000, efff] bus: 02 index 1 mmio: [f6000000, fbffffff] bus: 02 index 2 mmio: [50000000, 53ffffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffffffffffff] bus: 03 index 0 io port: [d000, d0ff] bus: 03 index 1 io port: [d400, d4ff] bus: 03 index 2 mmio: [50000000, 53ffffff] bus: 03 index 3 mmio: [58000000, 5bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 16757k freed Simple Boot Flag at 0x79 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1252699348.031:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1762 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SBTN] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (60 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855PM Chipset agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 serial 0000:00:1f.6: PCI INT B disabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100 ata1.00: 156301488 sectors, multi 8: LBA ata1.00: configured for UDMA/100 ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4241N, A100, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N A100 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i586 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=045e, idProduct=0040 usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) usb 3-1: Manufacturer: Microsoft usbcore: registered new interface driver hiddev input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5 input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 9:926:42 bdi 7:7: hash matches Freeing unused kernel memory: 412k freed Write protecting the kernel text: 2732k Write protecting the kernel read-only data: 1172k input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 RPC: Registered udp transport module. RPC: Registered tcp transport module. floppy0: no floppy controllers found BIOS EDD facility v0.16 2004-Jun-25, 2 devices found input: PC Speaker as /devices/platform/pcspkr/input/input8 squashfs: version 3.4 (2008/08/26) Phillip Lougher Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) No iBFT detected. video: Unknown symbol video_output_register video: Unknown symbol video_output_unregister Yenta: CardBus bridge found at 0000:02:01.0 [1028:016a] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation Yenta: ISA IRQ mask 0x04d8, PCI irq 11 Socket status: 30000086 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff cs: IO port probe 0xd000-0xefff: clean. pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 firewire_ohci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:ac:dd:dc firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10 ipw2100 0000:02:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection firmware: requesting ipw2100-1.3.fw firewire_core: created device fw0: GUID 424fc0001e876c61, S400 ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf8 Unable to load NLS charset utf8 ISO 9660 Extensions: RRIP_1991A b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ISOFS: Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev loop0. SELinux: 8192 avtab hash slots, 109076 rules. SELinux: 8192 avtab hash slots, 109076 rules. SELinux: 8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats SELinux: 73 classes, 109076 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1252699423.923:2): policy loaded auid=4294967295 ses=4294967295 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 xor: automatically using best checksumming function: pIII_sse pIII_sse : 3352.000 MB/sec xor: using function: pIII_sse (3352.000 MB/sec) async_tx: api initialized (async) raid6: int32x1 417 MB/s raid6: int32x2 484 MB/s raid6: int32x4 363 MB/s raid6: int32x8 343 MB/s raid6: mmxx1 1230 MB/s raid6: mmxx2 1398 MB/s raid6: sse1x1 968 MB/s raid6: sse1x2 1527 MB/s raid6: sse2x1 1667 MB/s raid6: sse2x2 1890 MB/s raid6: using algorithm sse2x2 (1890 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 md: linear personality registered for level -1 GFS2 (built Nov 18 2008 11:45:29) installed JFS: nTxBlock = 8074, nTxLock = 64597 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda3, internal journal on sda3:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext4), uses xattr EXT4-fs: mballoc: 0 blocks 0 reqs (0 success) EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost EXT4-fs: mballoc: 0 generated and it took 0 EXT4-fs: mballoc: 0 preallocated, 0 discarded EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda5, internal journal on sda5:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext4), uses xattr EXT4-fs: mballoc: 0 blocks 0 reqs (0 success) EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost EXT4-fs: mballoc: 0 generated and it took 0 EXT4-fs: mballoc: 0 preallocated, 0 discarded EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda3, internal journal on sda3:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext4), uses xattr EXT4-fs: mballoc: 0 blocks 0 reqs (0 success) EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost EXT4-fs: mballoc: 0 generated and it took 0 EXT4-fs: mballoc: 0 preallocated, 0 discarded EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda3, internal journal on sda3:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext4), uses xattr EXT4-fs: barriers enabled kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda5, internal journal on sda5:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext4), uses xattr Adding 1028120k swap on /dev/sda6. Priority:-1 extents:1 across:1028120k