Fedora 8 test 2 detects only two of my four SATA drives

[Willem Riede]

On my opteron server
http://smolt.fedoraproject.org/show?UUID=0fdd6288-6cb2-497e-a1a5-6459d9c8...
the x86_64 kernel detects only two out of four SATA drives.

I have the same problem with Fedora 7, I yum-ed to it to have the new
apps, but I still run a FC6 kernel, which detects them just fine.

I have two WD360GD-00FL (sda, sdb) - detected by F8- and two
ST3300831AS (sdc,sdd) - _not_ detected by F8.

This is the output of lspci on FC6:
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60
[Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
03:01.0 SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 01)
03:02.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
80:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
80:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
80:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)

I have captured lspci -vvxxx on fc6,f7,f8 and dmesg on startup for
fc6,f7 and f8, but since those are pretty big, I hesitate to post
these here.

Can anybody advise me how to proceed? Thanks, Willem Riede.

[Sean Bruno]

>  Can anybody advise me how to proceed? Thanks, Willem Riede.
>   
For now, please file a bugzilla report and attach the lspci and dmesg
outputs there.

Sean

http://bugzilla.redhat.com

[Willem Riede]

On 9/30/07, Sean Bruno <sean.bruno(a)dsl-only.net&gt; wrote:
>  > Can anybody advise me how to proceed? Thanks, Willem Riede.
>  >
>  For now, please file a bugzilla report and attach the lspci and dmesg
>  outputs there. 
https://bugzilla.redhat.com/show_bug.cgi?id=313491

Willem Riede.

[Willem Riede]

On 9/30/07, Willem Riede <wrrhdev(a)riede.org&gt; wrote:
>  On my opteron server
>  http://smolt.fedoraproject.org/show?UUID=0fdd6288-6cb2-497e-a1a5-6459d9c8...
>  the x86_64 kernel detects only two out of four SATA drives.
>
>  I have the same problem with Fedora 7, I yum-ed to it to have the new
>  apps, but I still run a FC6 kernel, which detects them just fine.
>
>  I have two WD360GD-00FL (sda, sdb) - detected by F8- and two
>  ST3300831AS (sdc,sdd) - _not_ detected by F8. 
I appear to be able to work around this by booting with pnpacpi=off.
Does anyone know if there is any downside to that?

Thanks, Willem Riede.