Hi all Fedora users,
I have just joined this list. I am running the latest Fedora but I can't get
my 3C900Combo networking card to work. I can see that the card is installed
but no IP-address is asigned to it and I can't set it. So I think that there
is a bug in that driver. Any other user out there who have a solution for
Best regards and thanks,
I know that is not a specific question about Fedora, but I can't find answer on the kernel mailing list.
Is somebody having server with integrated ATI RAGE XL video card? Is it possible to patch the kernel to support this video card? If I add VGA=791 in my grub.conf, I will have a resolution of 1024x768 which is good, but the display is very slow (especially when the screen is scrolling). If I use I this: "video=aty128fb:1024x768@70" it will not work. I'm using kernel 2.4.22 but I will try 2.6.0-test11 today.
If somebody has a patch, a link or anything else that can help me, it will be appreciated.
Thanks for your help.
Administrateur Réseau/Network Manager
Institut de Pharmacologie de Sherbrooke
3e étage (Édifice Z5)
3001 12e avenue Nord
Tél.: +1 819 820-6040
Direct: +1 819 820-6855
Fax.: +1 819 820-6841
I have two similar PC (old Pentium but workin fine)
In Pc no.1 I upgraded from RH8 to Fedora and it went fine: Soundblaster
is working fine
In Pc no.2 I made a fresh installation but in redhat-sound-config Fedora
doesn't see any card, that was working on Redhat 9 after soundconfig...
Where is the trick?? I assume that my Sounblaster is an old 16...but
fine on a router/firewall.
each time i boot fedora i must enable by hand the eth0 device (by the
What must i do to enable the device at boot?
# cat /etc/sysconfig/network
# cat /etc/sysconfig/networking/devices/ifcfg-eth0
# cat /etc/sysconfig/networking/profiles/default/ifcfg-eth0
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
all 3 the same output
# Macronix, Inc. [MXIC]|MX987x5
alias wfx (http://teg.sf.net)
I seem to have (finally :) ) acquired a complete(ish) / working x86_64
system .. but I'm still having trouble with a few bits, not least "yum".
Server: Fedora Core 1 - i386 - Base
Server: Fedora Core 1 - i386 - Released Updates
Server: Fedora Core 1 - i386 - Unreleased Updates
Finding updated packages
Traceback (most recent call last):
File "/usr/bin/yum", line 60, in ?
File "yummain.py", line 204, in main
File "clientStuff.py", line 363, in getupdatedhdrlist
File "clientStuff.py", line 409, in bestversion
IndexError: list index out of range
(This is a modified system [2.6.0-test11] however it seems to run well)
Pointing it at mozilla's channel for SeaMonkey seems to work if I
disable the default channels, however...
Anyone any ideas ?
(I was sort of expecting to see it say "no x86_64 updates supported yet"
as opposed to a complete crash)
Also, can yum pull SRPMS and rebuild them ?
Hello everyone. I have a problem I was hoping someone could help me
with. When I try to boot my Fedora CD I get this message
ISOLINUX 2.06 2003-08-22 isolinux: disk error 01, AX = 4293, 9F
I have no idea what it means or what to do. Any help that someone could
give me would be appreciated.
I have Dell Latitude D600, 512MB/1.4 GHz/ATI Radeon 9000/Alps GlidePoint
(might be only sold in EU). The problem is I _really_ dislike Alps
GlidePoint (dual, pad and stick) tapping feature.
I am using Fedora core 1 (yarrow) with default Xfree86 shipped with it,
and kernel 2.4.22-2135
I want to disable tapping from both stick and pad (or disable the pad)
I have tried almost every possible way to disable it(I have read most of
tuxmobile stuff for D600).
tpconfig - I disable gpm, boot to runlevel 3 run manually "tpconfig
--tapmode=0" it says ALPS tapping OFF, but when I start X tapping is
still there, even using any existing mouse driver (PS/2, Alps).
Does "tpconfig --tapmode=0" only affect on stick ?
I also try synaptics touchpad driver for xfree86 (I had to compile it).
but xfree will crash if driver not even loaded, only copied to
/usr/X11R6/lib/modules/input (not 100% sure) at least it will crash is
it is loaded.
So I read more documentation and found out that when using synaptics
driver with Alps glidepoint I should have 2.6 kernel to get events from
So is there any way disable Alps tapping with current kernel
I was wondering if anyone has gotten an ATI All in Wonder RADEON's TV
capabilities working in Fedora? There is a lot of information on the net
about this, but I haven't seen much for the RedHat distros. Apparently I
had it working in Debian, but KDE broke before I could really use it and
I ended up wiping Debian and installing Fefora on that machine. I'm
really only after being able to watch live TV off the S-Video input...
Any info would be appreciated- TIA
I have been trying to get an opengl game (vegastrike) to run on my
system. However whilst i've been trying to get this to work i seem to
have lost all opengl capabilities. When running any opengl app the
computer immediately freezes with no output to screen. Being a relative
newb i have no idea how to exit said freeze (ctrl alt F* doesn't get me
anywhere) and so i have to restart. GLXGears as well as tux racer freeze
as well. How can I fix this problem? Are there any logs that may be of
I'm running Kernel 2.6 on a P4 2.6 512MB
Thanks for any help.
For some reason I have no fonts in GNOME. It's not the pango problem;
my pango.modules is fully populated and world readable, as are all the
directories it references. But when I do a cleanup and start gnome from
scratch, all text disappears as soon as it gets to the globe+arrow logo.
I assume from this that it's a locale problem, but I have no idea where
to go from there. I also get empty .gnome2/share/?(cursor-)fonts/fonts.dir
files - or actually, containing just the single character '0'. Dunno
if that's related or if it just means I don't have my own custom fonts.