So I downloaded all three FC1 iso images, and shared them via NFS. I
verified the md5 sums, and made a CD of disc1, and booted a laptop with
it. I used the askmethod boot option so I could do a graphical NFS
install. Everything was going fine, I specified the IP address of the
server and the directory, the graphical installer launched, I set
partition info, selected the install type, set network config, firewall
config, and timezone config. I don't recall if there was anything else
after timezone config, but I was given an error dialog that said disc4
image wasn't found, and it rebooted.
; Justin Georgeson
; "Free the mallocs, delete the news"
I have a Microtek 4800 USB scanner and when I run the
Hardware Browser it is seen but when I try to scan
using Sane it is not seen by that program.
Question: Is there other scanner programs for Linux
that work or is there a way to force Scan to use the
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
> If all you need to do with MRTG is monitor ethernet interfaces,
running a full blown SNMP implementation
> is a bit overkill. All the data you need is sitting in /proc/net/dev
anyway and you can fetch it out with this
> simple program written for MRTG available here:
Thanks Fred, I'll try that. However I do need to monitor routers.
I just thought a first step to see how mrtg works would be to try
the host interfaces.
What is the XF86Config tool named in Fedora?
[root@localhost root]# which XF86Config
/usr/bin/which: no XF86Config in
[root@localhost root]# which XF86Conf
/usr/bin/which: no XF86Conf in
[root@localhost root]# which Xconfigurator
/usr/bin/which: no Xconfigurator in
[root@localhost root]# which xf86setup
/usr/bin/which: no xf86setup in
[root@localhost root]# which XF86Setup
/usr/bin/which: no XF86Setup in
Or what is the proper way to reconfigure X?
I tried to install the KDE 3.2.2 packages, twice, by downloading the
files from a KDE.org mirror site and installing using the command
rpm -Uvh *.rpm --force --nodeps
I received an error when starting the newly installed KDE. Error
loading kdeinit. Check installation.
Has anyone had this problem and can help me?
Hi, a novice user here, with a simple question. I want to remove the
alert notification tool from my panel (I'll check for updates myself).
When I select 'Remove from Panel' in the configuration wizard it goes.
But next time I login there it is again -annoying. I don't want to
remove the program from my system completely.
How can I remove the blinking icon from my panel for good?
I'm having a problem getting a valid configuration
file generated. While the problem is on an RH ES 3
system, I've been unable to get the taroon list to
process my post, and I suspect the problem is me, not
Using either of these commands:
# cfgmaker --output=/etc/mrtg/localhost.cfg \
--ifref=ip --global \
"WorkDir: /var/www/mrtg/html/stats" nwoptjm1@localhost
#cfgmaker --output=/etc/mrtg/localhost.cfg \
--ifref=ip --global \
"workdir: /var/www/mrtg/html/stats" \
---Results in both of the 2 fe interfaces sections in the
resulting config file looking like this:
### Interface 4 >> Descr: '' | Name: '' | Ip: '192.168.10.181' | Eth: ''
### The following interface is commented out because:
### * has a speed of which makes no sense
### * got 'Received SNMP response with error code
### error status: noSuchName
### index 1 (OID: 18.104.22.168.22.214.171.124.1.10.4)
### SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
### community: "nwoptjm1"
### request ID: -1403466218
### PDU bufsize: 8000 bytes
### timeout: 2s
### retries: 5
### backoff: 1)' from interface when trying to query
# Target[localhost_192.168.10.181]: /192.168.10.181:nwoptjm1@localhost:
# SetEnv[localhost_192.168.10.181]: MRTG_INT_IP="192.168.10.181"
# MaxBytes[localhost_192.168.10.181]: 0
SNMP walk looks like this:
[5:50pm]# snmpwalk -v 2c -c nwoptjm1 localhost interface
IF-MIB::ifNumber.0 = INTEGER: 3
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 16436
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 100000000
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: 0:d0:b7:b8:a4:78
IF-MIB::ifPhysAddress.3 = STRING: 0:2:b3:33:7e:5b
---stuff deleted here for brevity---
I'm using these rpms--
rpm -qa |grep snmp
rpm -qa | grep mrtg
Also using LANG="eng_us" in /etc/sysconfig/i8n.
What am I doing wrong? Thanks in advance!
I don't know if this is the right place to post, i hope i'm not hurting
anyone if i'm off topic.
I'm running FC1 for home using and I'm looking for a good web-based (LAMP)
music manager that provides audio cd indexing and searching with nice
Thanks for any suggestions
Configured several yum repos in /etc/rhn/sysconfig/sources.
rhn-applet shows several updates pending.
up2date says "Your system is up to date".
I changed the repos in /etc/rhn/sysconfig/sources
several times but still got "Your system is up to date".
Manually running "yum check-updates" gives the same list
of updates displayed by rhn-applet.
Watching up2date with ethereal reveals that it does a
GET for header.info with an "If-modified-since" header
with a very recent timestamp. When it receives
304 Not Modified, it appears to decide nothing's needed.
Where does up2date cache header.info, and how does it
determine the timestamp to use in the "If-modified-since"?
I suspect my header.info is 'cache poisoned' with a newer
version from a mirror that doesn't yet have the updates.
Jim Garrison (jhg(a)acm.org)
PGP Keys at http://www.jhmg.net RSA 0x04B73B7F DH 0x70738D88
I'd like to ask if you know something about the ECS G320 notebook's VGA problem because it's now impossible to use it with linux. It's ok with win 'cause it's "Designed for Windows XP" but i'd like to use it with Linux.
The problem appears when the graphical mode starts, so the machine freezes or in some cases I get a funky pictures. !!! But if the driver modul of the integrated VGA doesn't work than I get a beautiful picture and everything is OK except for video playback for example...
If anyone could help me, I'd really appriciate that.
Admin of kts.ath.cx