users September 2004

users@lists.fedoraproject.org

895 participants
1314 discussions

RE: error
by Ian Tobin 30 Sep '04

30 Sep '04

Hi, Ive tried yum but it cannot find that package for some reason. What dependencies are needed? thanks -----Original Message----- From: fedora-list-bounces(a)redhat.com [mailto:fedora-list-bounces@redhat.com] On Behalf Of Nicola Masiero Sent: 30 September 2004 17:16 To: For users of Fedora Core releases Subject: Re: error You must install dependeces for your rpm package. Why do you not try with yum? ----- Original Message ----- From: Ian Tobin <itobin(a)tidyhosts.com> Date: Thu, 30 Sep 2004 17:05:49 +0100 Subject: error To: fedora-list(a)redhat.com Hey, im trying to install this package but it keeps bringing up this error, anyone know what I should do? [root@ancaster itobin]# rpm -i courier-imap-3.0.7-1.9.i386.rpm error: Failed dependencies: libcom_err.so.3 is needed by courier-imap-3.0.7-1.9 thanks Ian -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list -- Dr. Nicola Masiero Email._ nmasiero(a)gmail.com -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

2 1

error
by Ian Tobin 30 Sep '04

30 Sep '04

Hey, im trying to install this package but it keeps bringing up this error, anyone know what I should do? [root@ancaster itobin]# rpm -i courier-imap-3.0.7-1.9.i386.rpm error: Failed dependencies: libcom_err.so.3 is needed by courier-imap-3.0.7-1.9 thanks Ian

5 4

RE: error
by Ian Tobin 30 Sep '04

30 Sep '04

Hi, Is it not possible to download this library? thanks -----Original Message----- From: fedora-list-bounces(a)redhat.com [mailto:fedora-list-bounces@redhat.com] On Behalf Of Aly Dharshi Sent: 30 September 2004 17:19 To: For users of Fedora Core releases Subject: Re: error Have you tried a locate to find out whether this library is on your machine ? Example: [dharshi]$ locate libcom /usr/include/boost/config/stdlib/libcomo.hpp /usr/lib/ooo-1.1/program/libcomphelp3gcc3.so /usr/lib/gnome-vfs-2.0/modules/libcomputer.so /usr/lib/mozilla-1.6/components/libcomposer.so /usr/lib/libcom_err.a /usr/lib/libcom_err.so /lib/libcom_err.so.2 /lib/libcom_err.so.2.1 /opt/mozilla/thunderbird-0.6/components/libcomposer.so See if the file you are looking for is present. I don't have the file on my system, so it may make sense to ask on the Courier mailing list if you could just link the /usr/lib/libcom_err.so.2 to /usr/lib/libcom_err.so.3 (this should be a really last last resort) or check to see if there is a new version of this library on a repository or if you are paying for RHN then check via up2date. Cheers, Aly. Ian Tobin wrote: > Hey, > > im trying to install this package but it keeps bringing up this error, > anyone know what I should do? > > > [root@ancaster itobin]# rpm -i courier-imap-3.0.7-1.9.i386.rpm > error: Failed dependencies: > libcom_err.so.3 is needed by courier-imap-3.0.7-1.9 > > thanks > > Ian > > > -- Aly Dharshi aly.dharshi(a)telus.net "A good speech is like a good dress that's short enough to be interesting and long enough to cover the subject" -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

1 0

Accpac on FC1 and FC2?
by Dr. Michael J. Chudobiak 30 Sep '04

30 Sep '04

Hi, Can anyone share their experiences running "Accpac Advantage Series for Linux" on Fedora Core 1 and 2? Are you using DB2, or something else as the back end? It's pretty clear that the Accpac for Linux client application runs under Wine... I'm running Accpac on a W2K server now, with Pervasive SQL, but Pervasive is getting flaky on me, and all my other apps are on Fedora now. I'd love to ditch Windows Terminal Server and use VNC instead! - Mike

2 1

Red Hat acquires AOL's Netscape server software
by Marius Andreiana 30 Sep '04

30 Sep '04

http://news.com.com/Red+Hat+acquires+AOLs+Netscape+server +software/2100-7344_3-5388906.html?tag=nefd.top Relevant paragraphs: "Red Hat's new software includes Netscape Directory Server, used to manage information such as usernames and access policies, and Netscape Certificate Server, used to manage user identities and encryption chores" "the company spent less than $25 million on the acquisition." "But open-source programmers already have an option when it comes to open-source directory software: the OpenLDAP project that Red Hat already includes. Szulik said the company will include both packages." Wouldn't "less than $25 million" have been better spent on extending OpenLDAP? They already support it, along with lots of other software (e.g. Evolution ldap address books). Who knows what artifacts has the old code. -- Marius Andreiana Galuna - Solutii Linux in Romania http://www.galuna.ro

1 0

Cvs on Fedora codepage problem
by Nicolas Fortin 30 Sep '04

30 Sep '04

Hi everybody, I imported a project in my Cvs Repository. I tried to checkout this project with Cvs on Fedora 2. The structure is ok, except that when a file or directory name contains an accented character, like those : "é","è", "ù", and so on ..., each of these characters are replaced by a question mark (?). Of course, it is now impossible to commit or update the modified files and directories. On a Cvs forum, someone told me that it is maybe the client's ANSI codepage which is not the same than server. Since I am pretty new with Linux and Fedora, I don't know where to find this information. Could you tell me where the codepage's details are located ? Is it possible to change it ? I thought that codepage informations where in /etc/fstab but I am not sure. Anyway, here is my file system table : ------------------------- LABEL=/ / ext3 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 /dev/hda5 /mnt/win_d vfat rw,auto,gid=100,umask=000,user,exec 0 0 /dev/hda6 /mnt/win_e vfat rw,auto,gid=100,umask=000,user,exec 0 0 /dev/hda8 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,r o 0 0 ------------------------- Best regards, Nicolas

3 2

Up2date Conflicts
by Piko Neal 30 Sep '04

30 Sep '04

Hwllo, My name is Piko, and first installed Linux this week 1. Whenever I try to use up2date, I get the error that this system may not be updated until it is associated with a channel. 2. How do I associate it with a channel? 3. Thank you for any help you can provide. Very Respectfully, Piko A. Neal, Jr.

3 2

XP+Core3=True?
by Erik Kjellqvist 30 Sep '04

30 Sep '04

Hi! I've read some posts on the internet recently announcing problems with dual-booting Feodora Core 2 (due to the Kernel 2.6) with Win Xp. A solution (both prevention to make to not get the problem in the beginning + solution to problem) is reported here: http://lwn.net/Articles/86835/ Anyone tested Feodora Core 3 - test 2? Is the problem still there? Anyone working on this bug or do I have to stick to the above procedure forever if I would like to install Fedora along with Win XP?? regards, /Erik

2 1

RESOLVED [Fwd: Screaming Interrupt [Was: Post-logoff sound problems]]
by Paul Kopacz 30 Sep '04

30 Sep '04

All it took was switching the PCI slot the sound card was in. Yippee. -------- Original Message -------- Subject: Screaming Interrupt [Was: Post-logoff sound problems] Date: Wed, 29 Sep 2004 09:33:54 -0400 From: Paul Kopacz <pkopacz(a)teksavvy.com> Reply-To: pkopacz(a)teksavvy.com, For users of Fedora Core releases <fedora-list(a)redhat.com> To: For users of Fedora Core releases <fedora-list(a)redhat.com> -------- Original Message -------- Subject: Post-logoff sound problems Date: Sun, 26 Sep 2004 16:27:34 -0400 From: Paul Kopacz <pkopacz(a)teksavvy.com> Reply-To: For users of Fedora Core releases <fedora-list(a)redhat.com> To: fedora-list(a)redhat.com Hi Everybody, Been trying to find a solution to this for a while. Using FC2 with a KDE desktop. My sound works fine the first time I log in. Upon subsequent logins, aRTs is running but does not accept sound to play (i.e. the play button is pressed but nothing is happening). If using ALSA to play sound directly (e.g. using XMMS and the ALSA plugin), it is trivial to make the sound skip, where on the first login it was difficult. When I logout, I get this from syslog: Sep 26 15:39:22 Berdoo kernel: irq 11: nobody cared! (screaming interrupt?) Sep 26 15:39:22 Berdoo kernel: irq 11: Please try booting with acpi=off and report a bug Sep 26 15:39:22 Berdoo kernel: Stack pointer is garbage, not printing trace Sep 26 15:39:22 Berdoo kernel: handlers: Sep 26 15:39:22 Berdoo kernel: [<42db33e1>] (snd_audiopci_interrupt+0x0/0x16a [snd_ens1371]) Sep 26 15:39:22 Berdoo kernel: Disabling IRQ #11 I would be infinitely surprised if this was not related :) I did boot with acpi=off (or at least I attempted to. I put acpi=off at the end of the kernel command line in GRUB. That should do it, right?) but the same message came up. I saw a similar bug at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=126322 that was apparantly fixed with a new kernel. I am running kernel-2.6.8-1.521 updated via yum. The original kernel had the same problem. Any help would be appreciated. Thanks. Paul Kopacz -- fedora-list mailing list fedora-list(a)redhat.com To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list I have attempted booting with acpi=off and pci=noacpi as well as changing just about everything in the BIOS that seems in any way related. There does not seem to be a way to turn off ACPI in the BIOS (No explicit ACPI = OFF setting, though I have turned off all power management options). Should I try building a non ACPI enabled kernel? I have also noticed that this problem happens when I _logoff_ KDE. If I just go and kill the X process (which has the effect of logging out the user, just not as 'cleanly'), then everything is fine. Something that KDE is doing upon logoff is causing this problem. (I'm not saying it's a KDE bug, since KDE does not have the power to unmap an interrupt, as that is what seems to be happening). Here is some /proc/interrupts output for those interested. After the computer is booted up but before the sound stuff is loaded: CPU0 0: 133910 XT-PIC timer 1: 187 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10: 41 XT-PIC eth0 11: 3181 XT-PIC r128@PCI:1:0:0 12: 82 XT-PIC uhci_hcd, uhci_hcd, uhci_hcd 14: 8766 XT-PIC ide0 15: 957 XT-PIC ide1 NMI: 0 ERR: 0 After the first login (sound stuff is loaded): CPU0 0: 176109 XT-PIC timer 1: 312 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10: 41 XT-PIC eth0 11: 3771 XT-PIC r128@PCI:1:0:0, Ensoniq AudioPCI 12: 82 XT-PIC uhci_hcd, uhci_hcd, uhci_hcd 14: 10755 XT-PIC ide0 15: 1066 XT-PIC ide1 NMI: 0 ERR: 0 The soundcard and vid card are sharing Interrupt 11, no problem, right? After logout: CPU0 0: 305703 XT-PIC timer 1: 399 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 0 XT-PIC acpi 10: 2099 XT-PIC eth0 11: 200000 XT-PIC Ensoniq AudioPCI, r128@PCI:1:0:0 12: 6313 XT-PIC uhci_hcd, uhci_hcd, uhci_hcd 14: 11547 XT-PIC ide0 15: 8051 XT-PIC ide1 NMI: 0 ERR: 0 Now the soundcard and vid card have switched places under Int 11, and the interrupt count has gone up 'significantly' I don't know enough to interpret a very verbose lspci dump, but if you do: 00:00.0 Host bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266] (rev 01) Subsystem: Asustek Computer, Inc.: Unknown device 8064 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f3000000-f3dfffff Prefetchable memory behind bridge: f3f00000-f7ffffff Expansion ROM at 0000d000 [disabled] [size=4K] BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b800 Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), Cache Line Size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at b400 Region 1: Memory at f2800000 (32-bit, non-prefetchable) [size=128] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Subsystem: Asustek Computer, Inc. VT8233A Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at b000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size 08 Interrupt: pin D routed to IRQ 12 Region 4: I/O ports at a800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size 08 Interrupt: pin D routed to IRQ 12 Region 4: I/O ports at a400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 18) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size 08 Interrupt: pin D routed to IRQ 12 Region 4: I/O ports at a000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS (prog-if 00 [VGA]) Subsystem: PC Partner Limited: Unknown device 7106 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=f3fe0000] Region 1: I/O ports at d800 [size=256] Region 2: Memory at f3000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at 00020000 [disabled] Capabilities: [50] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- This is before the problem happens. After, the output is the same, except that the sound card (at 00:0d.0), the line Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Now reads: Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR- (The MAbort has switched from - to +) Again, the relevant portion of /var/log/messages: Sep 29 07:25:30 Berdoo gdm(pam_unix)[2692]: session closed for user paul Sep 29 07:25:32 Berdoo kernel: irq 11: nobody cared! (screaming interrupt?) Sep 29 07:25:32 Berdoo kernel: irq 11: Please try booting with acpi=off and report a bug Sep 29 07:25:32 Berdoo kernel: Stack pointer is garbage, not printing trace Sep 29 07:25:32 Berdoo kernel: handlers: Sep 29 07:25:32 Berdoo kernel: [<42db63e1>] (snd_audiopci_interrupt+0x0/0x16a [snd_ens1371]) Sep 29 07:25:32 Berdoo kernel: Disabling IRQ #11 Sep 29 07:25:32 Berdoo kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. Sep 29 07:25:32 Berdoo kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode Sep 29 07:25:32 Berdoo kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode I don't know what to make of all this, and I don't know what else to try. The Screaming Interrupt problems I have seen discussed online are very short on solutions. Should I maybe try the kernel list? Thanks for your time. Sincerely, Paul Kopacz

1 0

RH 8.0 upgrade to Fedora Core 2 - crashes
by Bryan C. Andregg 30 Sep '04

30 Sep '04

I am attempting to upgrade a Red Hat 8.0 system to Fedora Core 2 using the install CD images from the website. The current system is a stock install with most updates (until 8.0 was EOL'd) and very little or no custom software or third party software installed. During the upgrade everything works until the installer displays "Preparing RPM Transaction" at which point the installer terminates and the system shuts down. The upgrade log has plenty of detail about upgrading dependancies followed by packages to be upgraded and ends with: The following packages were available in this version but NOT upgraded: Upgrading comps-8.0-0.20020910. The only other errors in the upgrade log all look like: OMF file [/usr/share/omf/glade/turbo-start-C.omf] does not validate against Scro llKeeper-OMF DTD: /usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd Does anyone know why the installer is crashing and/or how to prevent that from happening? Cheers, -- Bryan C. Andregg <bandregg(a)loopback.net>

4 4

← Newer
1
...
7
8
9
10
11
12
13
...
132
Older →

Jump to page: