users November 2005

users@lists.fedoraproject.org

717 participants
1195 discussions

Error booting both Kernel 2.6.14-1.1637 and 2.6.14-1.1644
by Ubence Quevedo 30 Nov '05

30 Nov '05

I get the following error whenever I boot into Kernel 2.6.14-1.1637 or the just released 2.6.14-1.1644: Decompressing Linux...done. Booting the kernel. PCI: Cannot allocate resource region 4 of device 0000:00:06.0 PCI: Cannot allocate resource region 4 of device 0000:00:08.0 PCI: Cannot allocate resource region 4 of device 0000:01:00.0 PCI: Failed to allocate I/O resource #4:4000@10000 for 0000:00:08.0 PCI: Error while updating region 0000:00:06.0/4 (00001001 != 0000f001) PCI: Failed to allocate mem resource #1:40000000@c0000000 for 0000:01:00.0 My system is a AMD Athlon 64 3000+ CPU installed in a Asus K8N4-E Deluxe motherboard with an Asus GeForce 6200 PCIe video card. I also have an Intel Pro 100 PCI network card installed. Has anyone else run into this issue? -Ubence

2 2

Making sense of OOM killer messages?
by Naoki 30 Nov '05

30 Nov '05

Hi all, I've just had oom killer toast a process. From the messages can I tell how much memory (real/swap) this process was using before it was blasted? kernel: Normal free:3304kB min:3756kB low:4692kB high:5632kB active:343712kB inactive:466528kB present:901120kB pages_scanned:2328996 all_unreclaimable? yes kernel: protections[]: 0 0 0 HighMem free:512kB min:512kB low:640kB high:768kB active:568648kB inactive:567380kB present:1179072kB pages_scanned:508296 all_unreclaimable? no protections[]: 0 0 0 kernel: DMA: 1*4kB 0*8kB 2*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 68kB kernel: Normal: 0*4kB 1*8kB 0*16kB 19*32kB 0*64kB 15*128kB 3*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3304kB kernel: HighMem: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 512kB kernel: Swap cache: add 5952419, delete 5951922, find 42444162/42881561, race 35+213 kernel: Free swap: 0kB kernel: 524144 pages of RAM kernel: 294768 pages of HIGHMEM kernel: 5277 reserved pages kernel: 2594451 pages shared kernel: 497 pages swap cached kernel: Out of Memory: Killed process 15156 (httpd). kernel: oom-killer: gfp_mask=0xd0

4 5

Fedora tvtime requires YUY2 overlay support
by Skunk Worx 30 Nov '05

30 Nov '05

This is a fully up-to-date FC4 (Fedora Core 4) box. lspci: 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01) /var/log/Xorg.0.log: (II) Loading /usr/X11R6/lib/modules/drivers/via_drv.o (II) Module via: vendor="X.Org Foundation" compiled for 4.3.99.902, module version = 4.1.30 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 $ tvtime Running tvtime 1.0.1. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /root/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card Is there anything to be done about this? The earliest bug reports about YUY2 failing on S3 Unichrome date back to 9/26/2003: http://forums.viaarena.com/messageview.aspx?catid=28&threadid=45263&highlig… TIA, SW

1 1

immutable bit
by preeti malakar 30 Nov '05

30 Nov '05

Why is the immutable bit of all system binaries viz files in /sbin, /bin, /usr not set, so that none can change or delete them? as you can see chattr /bin/login will give ------------- /bin/login -- Regards Preeti Malakar 2nd year of M.Tech in CSE Indian Institute of Technology Guwahati India

7 8

mounted multiple times
by Jack Tanner 30 Nov '05

30 Nov '05

On an FC4 client, I'm mounting an smbfs filesystem over the network. In /etc/fstab, I have //server/share /mount/point smbfs credentials=/home/user/.smbcreds,noauto,user 0 0 The user's .bash_profile contains the actual mount command, which goes off without a hitch. Consequently, the user can issue $ umount /mount/point when necessary. It's all well and good, until the user connects to the FC4 client twice, and runs two xterms which both source .bash_profile. Now the mount command has been issued twice, so here's what happens: $ umount /mount/point umount: it seems /mount/point is mounted multiple times Well, yes, it has been mounted multiple times; but how can the user unmount it now?

4 6

Re: Wireless driver for FC4 64 bit - Broadcom 802.11g
by Mark Symmes 30 Nov '05

30 Nov '05

Patrick, I just followed your advice. Thanks. But I am running the 64 bit kernel for FC4 and the ndiswrapper will not install the Broadcom 32 bit windows driver. It says it is installed and working but dmesg shows it did not install. Is there a 64 bit windows driver. The Acer Ferrari 3200 uses the Broadcom 4306 which I think is different than what is in your new Ferrari 4000. Mark Symmes

3 2

(no subject)
by Chris Norman 30 Nov '05

30 Nov '05

Hi all, I would like to get a telnet server running on my machine. I already have SSh, I have installed telnet-server, and started xinetd. What else do I have to do? Cheers,

6 5

NFS problem
by Eric TANGUY 30 Nov '05

30 Nov '05

I have a fc3 server and fc4 clients. Each client mount 2 nfs directory at bootup : 192.168.10.10:/home /home nfs exec,dev,suid,rw 1 1 192.168.10.10:/usr/local /usr/local nfs exec,dev,suid,ro 1 1 Since today /home is not mounted at boot (but /usr/local is mounted) but this seems to be randomly. The problem is : i can't find where can i see the problem. I found no log dedicated to nfs on the server and no log about nfs on the clients. Thanks -- Eric Tanguy | Nantes, France <eric.tanguy(a)univ-nantes.fr> Key : A4B8368F | Key Server : subkeys.pgp.net Fedora Core release 4 (Stentz) sur athlon kernel 2.6.14-1.1637_FC4

4 4

RE: SSh, Apache implementation
by Styma, Robert E (Robert) 30 Nov '05

30 Nov '05

> > Robert, > > You told me to do > mount -t nfs titanic:/home/documents /var/www/html/databse > /home/documents has user right. > How the system will be able to acess it ? > But Oops, the mount would be done on titanic and should read: mount -t nfs databse:/home/documents /var/www/html/databse Some days I cannot paste correctly. Sorry. The existing empty directory named /var/www/html/database on titanic will be overlaid by the mount point. /var/www/html is the default place the Linux apache looks for documents to server. If you have changed this in the configuration script (or utility) then put the mount in the appropriate place. Thus: http://titanic/database/some_file.html will reference the file in /home/docuements on databse. When you get this working to your satisfaction using a manual mount command, you may want to update /etc/fstab to do the mount at boot time. This can cause complications however if titanic gets booted when databse is off. Another approach is to use the automounter to do the mount. Bob Styma

2 1

[OT] Route Planner
by Andy Pieters 30 Nov '05

30 Nov '05

Hi List Sorry 'bout the OT question. I looked at several routplanners with the help of google, but I haven't seen one that has the option I need. Basically I want to make a trip from south france to north france without using highways, since the vehicles we'll be using are not allowed on the highway. Anyone has any suggestions? Thanks a lot Andy -- Now listening to Top! Radio Live www.topradio.be/stream on amaroK Geek code: www.vlaamse-kern.com/geek Registered Linux User No 379093 If life was for sale, what would be its price? www.vlaamse-kern.com/sas/ for free php utilities --

4 6

← Newer
1
...
6
7
8
9
10
11
12
...
120
Older →

Jump to page: