Re: [squid-users] Still can´t block MSN Messenger
by azeem ahmad
>From: "updatemyself ." <updatemyself(a)gmail.com>
>To: "Eduardo Bejar" <wonka(a)linkabu.net>
>CC: squid-users(a)squid-cache.org
>Subject: Re: [squid-users] Still canŽt block MSN Messenger
>Date: Thu, 2 Mar 2006 03:46:20 +0530
>
>MSN messenger is using.. the port 1863
>so try to block that port in squid.. hope it will work..
>i think i done this.. but not recently..
>so i cant give u the config line example...
>
>
>On 3/2/06, Eduardo Bejar <wonka(a)linkabu.net> wrote:
> > Can anyone that has succesfully blocked MSN Messenger, please send me an
> > example on how to do it?
> >
> > Thanks and regards,
> >
> > Edo
user mime types to block msn
there is an acl type for mime types. check for it
Regards
Azeem
18 years, 2 months
how to set Djava.net.preferIPv4Stack=true
by Jack Howarth
I have tried both the sun 1.5 JDK and the IBM version
using the jpackage nosrc rpms on FC4 and in both cases, the
http://www.java.com/en/download/help/testvm.xml web page loads
a red X for the java applet. I have read that one can use the
-Djava.net.preferIPv4Stack=true flag to solve this problem with
ipv6 but have been unable to get it to work. I thought I should
add '-Djava.net.preferIPv4Stack=true' to the Java Applet Runtime
Settings' Java Runtime Parameters field in the Java Control Panel.
However this doesn't seem to work with firefox. Does anyone
know how to make sure that the java plugin starts with the
java.net.preferIPv4Stack setting set to true?
Jack
18 years, 2 months
Galeon! -- & VDQ yum
by Beartooth
I have four FC4 machines on my desk -- one main one, a special-purpose
one, and a couple of backitter-uppiters. On a hunch and a hope, I tried
"yum install galeon" on one.
To my surprise and delight, it worked! And the Galeon it installed (2.0.0)
also works, and looks even better than when I had it before dependency
hell.
So I naturally went right to the other three, and commanded the same.
It worked on two, giving me a total of three galeon-capable machines.
On the fourth, however, I get only :
[root@localhost ~]# yum install galeon
Setting up Install Process
Setting up repositories
updates-released 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
base 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
No Match for argument: galeon
Nothing to do
You have new mail in /var/spool/mail/root
[root@localhost ~]
I looked through man yum, and took to poking around repos.d -- but
couldn't see what to change. I took a look at the extras file and the
updates file there, both on the problem machine and on one of the ones
that got galeon; everything has enabled=1
So what do I need to do?
--
Beartooth Staffwright, Neo-Redneck Linux Convert
FC4; Pine 4.64, Pan 0.14.2.91; Privoxy 3.0.3; CXO 5.0.1
Dillo 0.8.5, Opera 8.51, Firefox 1.0.7, Epiphany 1.6.5
Remember I have little idea what I am talking about.
18 years, 2 months
proper way to yum update i386 on x86_64
by Jack Howarth
I have been installing specific i386 packages (such as Firefox)
on machines with x86_64 Fedora Core 4 using the following approach.
I created fedora.i386.repo, fedora-updates.i386.repo, and
fedora-extras.i386.repo in /etc/yum.repos.d with contents of...
[base-i386]
name=Fedora Core $releasever - i386 - Released Updates
baseurl=http://download.fedora.redhat.com/pub/fedora/linux/core/4/i386/os/
#mirrorlist=http://fedora.redhat.com/download/mirrors/fedora-core-$releasever
enabled=0
gpgcheck=1
[updates-released-i386]
name=Fedora Core $releasever - i386 - Released Updates
baseurl=http://download.fedora.redhat.com/pub/fedora/linux/core/updates/$...
#mirrorlist=http://fedora.redhat.com/download/mirrors/updates-released-fc$releasever
enabled=0
gpgcheck=1
[extras-i386]
name=Fedora Extras $releasever - i386
baseurl=http://download.fedora.redhat.com/pub/fedora/linux/extras/$releas...
#mirrorlist=http://fedora.redhat.com/download/mirrors/fedora-extras-$releasever
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-extras
gpgcheck=1
These work fine for installing specific i386 packages with yum using the
--enablerepo flag set to the appropriate repository. However I am quite
unclear on how I can cleanly use 'yum update' to update only those i386
packages installed to the latest versions without accidentally installing
additional i386 packages for other packages that are already installed
as the x86_64 version only. Thanks in advance for any clarifications on
this issue.
Jack
18 years, 2 months
Info about fedora and dell inspiron 630m
by S. Cesaretti
Hi
I trid to install fedora core 3 n my notebook inspiron 630m but it doesn't work correctly.
When the system asks login the keyboard doesn't write in random way.
one time it writes and onother time it doesn't write.
How can I solve this problem?
I would try to update the kernel but It's really difficult because the system doesn't work correctly as I said.
Can I try to install fedora core 4? which version of kernel has it got?
Other tow question, does it available fedora core 5?
Because I saw some messages about it on the mailing list but I didn't see anything about it on the website?
At the end, what is the last versione available for the kernel for fedora that I can install with yum?
Thanks in advance for all information.
Best regards.
S. Cesaretti
Maybe I can try to update the kernel but unfortunately, It's really difficult because
the system doesn't work correctly.
18 years, 2 months
RE: Advice on setting up Raid and LVM
by Ralph.Grothe＠itdz-berlin.de
Hi Fajar,
I would say it is basically a matter of your personal taste.
However, if you wish to extend your LVs later without too much
hassle
I would prefer initially setting up one large RAID 1 which should
serve
as one PV.
I would only separate the /boot partition to an isolated RAID 1
meta device.
Though it is possible to put /boot onto an LV I would strongly
disuade you from doing so.
The issue here is disaster recovery because you need a specially
tuned kernel and
initial ramdisk that can cope with loading the kernel from a
/boot LV,
which the recovery mode of your distro's install CD usually
doesn't provide.
Btw, for the same reason I found the ubiquitious Knoppix live CDs
practically useless
for my Linux boxes.
So in /etc/fstab I would set
/dev/mdo /boot ...
as mountpoint.
Then, assuming you built a big enough /dev/md1 to host /, /usr,
/var, /tmp, /home
I would create a root VG from one big PV
e.g.
# pvcreate /dev/md1
# vgcreate -s 16 -p 8 -l 64 vgroot /dev/md1
And then create your LVs al gusto
e.g.
# lvcreate -L 512m -n lv_root vgroot # if you're afraid you
could increase / to 1G but usually 512m should suffice
# lvcreate -L 3072m -n lv_usr vgroot # depending on the
amount of binaries you install, cave kernel sources
# lvcreate -L 2048m -n lv_var vgroot # for a web or mail
server producing large spools and logs set high
# lvcreate -L 512m -n lv_tmp vgroot
# lvcreate -L 1024m -n lv_opt vgroot # some non-OS binaries
like Fedora's Directory Server install here
# lvcreate -L 2048m -n lv_home vgroot # depending on how many
users you host
Then create filesystems al gusto
# vgdisplay -v vgroot|awk '/LV Name/{print$NF}'|xargs -n1
mkfs.ext3
If you run out of PEs and you need to increase any LV you can at
any time
add other RAID1 devs
e.g. you have spare md2 md3 md4
vgextend vgroot /dev/md[2-4]
and then
lvextend -L +4092m /dev/vgroot/lv_home
ext2online /dev/vgroot/lv_home
HTH
Ralph
> -----Original Message-----
> From: fedora-list-bounces(a)redhat.com
> [mailto:fedora-list-bounces@redhat.com]On Behalf Of Fajar
Priyanto
> Sent: Thursday, March 02, 2006 12:47 PM
> To: For users of Fedora Core releases
> Subject: Advice on setting up Raid and LVM
>
>
> Hi all,
> I'm setting up Raid 1 and LVM on 2x80GB SATA drives.
>
> The partition scheme is like this:
> /boot = 300MB
> / = 9.2GB
> /home = 70GB
> swap = 500MB
>
>
> The RAID is RAID 1.
> md0 = 300MB = /boot
> md1 = 9.2GB = LVM
> md2 = 70GB = LVM
> md3 = 500MB = LVM
>
> Now, the confusing part is:
> 1. When creating VolGroup00, should I include all PV (md1,
> md2, md3)? Then
> create the LV.
> 2. When setting up RAID 1, should I make those separated
partitions
> for /, /home, and swap? Or, should I just make one big RAID
device?
>
> The future purpose of using LVM is I want to be able to
> expand any partitions
> that would run out of space into a new disk.
>
> Thank you very much.
> --
> Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial
> http://linux2.arinet.org
> 18:35:53 up 4:55, 2.6.15-1.1830_FC4 GNU/Linux
> Let's use OpenOffice. http://www.openoffice.org
>
> --
> fedora-list mailing list
> fedora-list(a)redhat.com
> To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-list
>
18 years, 2 months
hostname
by azeem ahmad
hi list
i set the hostname using the command
hostname
but when i restart i gets back to the old hostname
how can i change it permanently
Regards
Azeem
18 years, 2 months
Info about fedora and dell inspiron 630m
by S. Cesaretti
Hi
Sorry I left some mistakes on the last messages, please don't read it.
This is the correct version of the message.
I trid to install fedora core 3 n my notebook inspiron 630m but it doesn't work correctly.
When the system asks login the keyboard doesn't write in random way.
one time it writes and onother time it doesn't write.
How can I solve this problem?
I would try to update the kernel but It's really difficult because the system doesn't work correctly as I said.
Can I try to install fedora core 4? which version of kernel has it got?
Other tow question, does it available fedora core 5?
Because I saw some messages about it on the mailing list but I didn't see anything about it on the website?
At the end, what is the last versione available for the kernel for fedora that I can install with yum?
Thanks in advance for all information.
Best regards.
S. Cesaretti
18 years, 2 months
Advice on setting up Raid and LVM
by Fajar Priyanto
Hi all,
I'm setting up Raid 1 and LVM on 2x80GB SATA drives.
The partition scheme is like this:
/boot = 300MB
/ = 9.2GB
/home = 70GB
swap = 500MB
The RAID is RAID 1.
md0 = 300MB = /boot
md1 = 9.2GB = LVM
md2 = 70GB = LVM
md3 = 500MB = LVM
Now, the confusing part is:
1. When creating VolGroup00, should I include all PV (md1, md2, md3)? Then
create the LV.
2. When setting up RAID 1, should I make those separated partitions
for /, /home, and swap? Or, should I just make one big RAID device?
The future purpose of using LVM is I want to be able to expand any partitions
that would run out of space into a new disk.
Thank you very much.
--
Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial
http://linux2.arinet.org
18:35:53 up 4:55, 2.6.15-1.1830_FC4 GNU/Linux
Let's use OpenOffice. http://www.openoffice.org
18 years, 2 months
Re: motherboard
by Andrea Bencini
> Why shouldn't it be? The board supports a x86 processor. Provide at
> least 256 MB memory, CD/DVD-ROM, graphics card, and a hard drive with
> 10-20GB of free space and you should be set.
Thank to all
Andrea
18 years, 2 months
