fc5: install: boot option: VGA driver i810
by Dario Lesca
How to force to anaconda installer the Display driver ?
Witch option I must type at the linux: prompt?
This help when I install FC5 on a system whit a VGA Intel i810 driven.
This driver (i810) not work on many system (or on my system?)
Many thanks
--
Dario Lesca <d.lesca(a)solinos.it>
18 years
- 3
- 3
Multiple TCP Connection
by Eder, Norbert
Hello all,
When I use Fedora Core 3 to open multiple TCP Connection to a
SUN-Solaris Maschine, I can open arround 15000 connections in parallel.
I have checked it with:
netstat -s |grep connections
29976 active connections openings
14929 connections established
But when I upgrade to FC4, then only around 11000 TCP connections are
possible at the same time.
The Error Report is "Segmentation fault".
Is there a Parameter for limitation?? ("ulimit" / "/proc/sys/...." / ...
)
Can anybody help me??
THANKS for your help.
bye,
Nobsi
18 years
- 4
- 4
troubles whit lan drivers using Fedora Core 4
by Rolando
Hi
for my new p.c. I bought a P5V800-MX ASUS motherboard whit internal NIC, and I would like to use Fedora Core 4.
After FC4 installation (as workstation mode) the LAN does't work because I'have to install the driver for NIC: the driver is in a ASUS CD with others support softwares (audio driver, vga driver, etc.).
To do that ASUS releases a VIA Rhine Family Fast Ethernet Adapter for Linux driver (the compressed file name is rhinefet.tgz) with instructions for linux driver installation...
ASUS writes:
1): compile the source code to generate rhinefet.ko (I'm using a 2.6.11-1.1369_FC4smp kernel)
2) insert the compiled file as module using insmode command
But when I try, following instructions, to "make" the files I just obtain errors like "union <anonymous> has no member named 'ethernet'
Can anybody help me?
Thanks a lot for your help.
bye,
Rolando
18 years
- 2
- 3
Kernel panic 2.6.16-1.2096_FC5 - aacraid
by David Kredba
Hello.
I have there kernel panic with kernel 2.6.16-1.2096_FC5 on x86_64 hardware.
It is based on Intel Corporation E7230, CPU Intel(R) Pentium(R) D CPU
2.80GHz, 2 GB RAM.
There is Adaptec AAR 2420SA with RAID 5.
Server runs fine without users about 14 days and about 2.5 day with
normal user load.
Server freezes yesterday morning, there is nothing suspect in log files,
except the clamd (0.88.1) crash on some HTML_phishing_bank ... (upgraded
to 0.88.2).
Magic SysRq turned off.
I have this screenshot :
Badness in panic at kernel/panic.c:140 (Not tainted)
Call Trace: <IRQ> <ffffffff801321a0>{panic+488} {_spin_unlock_irq+12}
<ffffffff8033aefe>{__down_read+52}<ffffff8033b58e>{_spin_lock_irqsave+9)
<ffffffff8020168e>{__up_read+19} <ffffffff80135977>{do_exit+140}
<ffffffff8010c1ec>{kernel_math_error+0}<ffffffff8010c779>{do_invalid_op+163}
<ffffffff880440d8>{:aacraid:aac_intr_normal+411}<ffffffff8033b58e>{_spin_lock_irqsave+9}
<ffffffff88006e07>{:scsi_mod:scsi_run_queue+361}<ffffffff8010b6f9>{error_exit+0}
<ffffffff80339cbe>{thread_return+0}<ffffffff880440d8>{:aacraid:aac_intr_normal+411}
<ffffffff880304d3>{:sd_mod:sd_rw_intr+589}<ffffffff8804529b>{aacraid:aac_rktt_intr+55}
<ffffffff8015a30c>{handle_IRQ_event+414}<ffffffff8015a3d9>{__do_IRQ+156}
<ffffffff8010ce01>{do_IRQ+59}<ffffffff801098b2>{mwait_idle+0}
<ffffffff8010ad3e>{ret_from_intr+0}<EOI><ffffffff801098b2>{mwait_idle+0}
<ffffffff80339cbe>{thread_return+0}<ffffffff801098e8>{mwait_idle+54}
<ffffffff8010988f>{cpu_idle+151}<ffffffff8053a81b>{start_kernel+470}
<ffffffff8053a298>{_sinittext+664}
Has anybody seen this before? Is there a workaround or patch?
Is failing the AAR2420?
I flashed the RAID using latest firmware build nr. 8832 after the crash.
Thank you, David Kredba
lsmod :
Module Size Used by
nls_utf8 35265 0
ncpfs 88673 0
nfs 251289 1
nfsd 286249 17
exportfs 38977 1 nfsd
lockd 96977 3 nfs,nfsd
nfs_acl 36801 2 nfs,nfsd
sunrpc 192137 13 nfs,nfsd,lockd,nfs_acl
autofs4 55241 1
hidp 83137 2
l2cap 91585 5 hidp
bluetooth 116933 2 hidp,l2cap
ipv6 398689 127
ipx 95497 0
p8023 35265 1 ipx
dm_mirror 54593 0
dm_mod 90385 1 dm_mirror
video 50505 0
button 40545 0
battery 43337 0
ac 38473 0
lp 47633 0
parport_pc 62697 0
parport 74061 2 lp,parport_pc
floppy 100617 0
nvram 42441 0
sg 69097 0
ehci_hcd 65229 0
uhci_hcd 65505 0
e1000 141869 0
i2c_i801 42581 0
i2c_core 57409 1 i2c_i801
ext3 164177 6
jbd 93545 1 ext3
ata_piix 44357 0
libata 93913 1 ata_piix
aacraid 92353 7
sd_mod 50753 8
scsi_mod 181137 4 sg,libata,aacraid,sd_mod
lspci -vv :
00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
Subsystem: Intel Corporation Unknown device 346a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: 88000000-882fffff
Prefetchable memory behind bridge:
0000000088600000-0000000088600000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1,
Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 1, PowerLimit 25.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1,
Port 5
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 5, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 88400000-884fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1,
Port 6
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 6, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 3080 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 3060 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 3040 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at 3020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 88500400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 88300000-883fffff
Prefetchable memory behind bridge:
0000000080000000-0000000087f00000
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 30b0 [size=16]
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 8f [Master SecP
SecO PriP PriO])
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 30c8 [size=8]
Region 1: I/O ports at 30e4 [size=4]
Region 2: I/O ports at 30c0 [size=8]
Region 3: I/O ports at 30e0 [size=4]
Region 4: I/O ports at 30a0 [size=16]
Region 5: Memory at 88500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
Subsystem: Intel Corporation Unknown device 346a
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 3000 [size=32]
01:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: 88000000-882fffff
Prefetchable memory behind bridge:
0000000088600000-0000000088600000
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 512 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x8
Capabilities: [5c] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Freq=133MHz
Status: Dev=01:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
Capabilities: [100] Advanced Error Reporting
Capabilities: [300] Power Budgeting
02:02.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02)
Subsystem: Adaptec ASR-2420SA
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 250ns max), Cache Line Size 10
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 88000000 (64-bit, non-prefetchable) [size=2M]
Region 2: Memory at 88200000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 88600000 [disabled] [size=32K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [58] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=16
Status: Dev=02:02.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=4096 DMOST=2 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [60] Vital Product Data
04:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet
Controller (Copper) (rev 03)
Subsystem: Intel Corporation Unknown device 30a2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 88480000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 88400000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 2000 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <512ns, L1 <64us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown,
Port 0
Link: Latency L0s <128ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00
04:00.2 IDE interface: Intel Corporation Unknown device 108d (rev 03)
(prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2040 [size=8]
Region 1: I/O ports at 2050 [size=4]
Region 2: I/O ports at 2038 [size=8]
Region 3: I/O ports at 204c [size=4]
Region 4: I/O ports at 2020 [size=16]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <512ns, L1 <64us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown,
Port 0
Link: Latency L0s <128ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00
04:00.3 Serial controller: Intel Corporation Unknown device 108f (rev
03) (prog-if 02 [16550])
Subsystem: Intel Corporation Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 2030 [size=8]
Region 1: Memory at 884a1000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <512ns, L1 <64us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown,
Port 0
Link: Latency L0s <128ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00
04:00.4 Class 0c07: Intel Corporation Unknown device 108e (rev 03)
(prog-if 01)
Subsystem: Intel Corporation Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size 10
Interrupt: pin D routed to IRQ 11
Region 0: Memory at 884a0000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2048 [size=4]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <512ns, L1 <64us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown,
Port 0
Link: Latency L0s <128ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 63-3b-d6-ff-ff-20-13-00
05:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
(prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 515e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at 88340000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fffe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
Subsystem: Intel Corporation Unknown device 30a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 88320000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 88300000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 1100 [size=64]
Expansion ROM at 88360000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
18 years
- 1
- 0
Installing mailman of Fedora Core 5
by Ignacio Verona
Hi,
I'm trying to install mailman on a FC5 system, but doing 'yum install
mailman' returns me a lot of lines like:
[1/1]warning: group mailman does not exist - using root
And after that I'm not able to do anything.
'/usr/lib/mailman/bin/mmsitepass' returns:
Traceback (most recent call last):
File "/usr/lib/mailman/bin/mmsitepass", line 45, in ?
from Mailman import Utils
File "/usr/lib/mailman/Mailman/Utils.py", line 51, in ?
from Mailman import mm_cfg
File "/usr/lib/mailman/Mailman/mm_cfg.py", line 51, in ?
MAILMAN_GID = grp.getgrnam('mailman')[2]
KeyError: 'getgrnam(): name not found: mailman'
Because neither the 'mailman' user or 'mailman' group does exist. Any
clue about what happens?
thanks a lot in advance,
Ignacio.
18 years
- 3
- 4
mount problems
by Tony Crouch
Hi,
I have a curious problem I encounter when trying to use the mount
command to view shares on my girlfriend's Windows XP machine.
I am ping her machine via both DNS (which is statically set
in /etc/hosts) and by IP address.
But ...
I can only mount shares via her IP address, not by her DNS name.
Please find the terminal output below. Any assistance / suggestions
anyone could provide would be great. Should this be filed with bugzilla?
> [root@tony-wired pdab100]# mount //amber-wireless/documents /amber-comp
> Password:
> mount error 5 = Input/output error
> Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
> [root@tony-wired pdab100]# mount //192.168.1.20/documents /amber-comp
> Password:
> [root@tony-wired pdab100]# cat /etc/hosts
> # Do not remove the following line, or various programs
> # that require network functionality will fail.
> 127.0.0.1 localhost.localdomain localhost
> 192.168.1.10 tony-wireless.localnetwork.com tony-wireless
> 192.168.1.11 tony-wired.localnetwork.com tony-wired
> 192.168.1.20 amber-wireless.localnetwork.com amber-wireless
> 192.168.1.21 amber-wired.localnetwork.com amber-wired
> 192.168.1.1 netcomm-router.localnetwork.com netcomm-router
> 192.168.1.2 netgear-router.localnetwork.com netgear-router
> [root@tony-wired pdab100]# ping amber-wireless
> PING amber-wireless.localnetwork.com (192.168.1.20) 56(84) bytes of data.
> 64 bytes from amber-wireless.localnetwork.com (192.168.1.20): icmp_seq=1 ttl=128 time=1.74 ms
>
> --- amber-wireless.localnetwork.com ping statistics ---
> 2 packets transmitted, 1 received, 50% packet loss, time 999ms
> rtt min/avg/max/mdev = 1.746/1.746/1.746/0.000 ms
Cheers,
Tony Crouch
--
GPG Key fingerprint = EEB2 6364 791C 3BE2 A008 22D0 C469 950C 7C5A EE77
18 years
- 2
- 1