users July 2006

users@lists.fedoraproject.org

588 participants
965 discussions

Re: problem with httpd-2.2.0-5.1.2 after the latest FC5 httpd update
by Scott R. Godin 03 Jul '06

03 Jul '06

On Mon, 2006-07-03 at 06:56 -0400, fedora-list-request(a)redhat.com wrote: > Re: problem with httpd-2.2.0-5.1.2 after the latest FC5 httpd > update have you tried a vim -d /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf.rpmnew (or gvim for a better colorscheme, if you have vim-x11 installed) to show differences, if the .rpmnew file exists ? (possible after any updates)

1 0

FC4: problems with kernel-2.6.17-1.2139_FC4
by Alberto Ferrante 03 Jul '06

03 Jul '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Dear all, I have recently updated the kernel of one of our servers. The new kernel (2.6.17-1.2139_FC4) appears not to recognize the host controller. Thus, some devices, such as the USB controller, do not work. When the new kernel is used, lspci does not even show the host bridge and the USB controller; here is the result of lspci when the new kernel is used: 00:02.0 RAID bus controller: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02) 00:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02) 00:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:05.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller To make things work I needed to roll back to the old kernel release (2.6.16-1.2115_FC4). Here is the result of a lspci when the old kernel is used: 00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 32) 00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge 00:02.0 RAID bus controller: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02) 00:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02) 00:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:05.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller 00:0f.0 ISA bridge: Broadcom CSB6 South Bridge (rev a0) 00:0f.1 IDE interface: Broadcom CSB6 RAID/IDE Controller (rev a0) 00:0f.2 USB Controller: Broadcom CSB6 OHCI USB Controller (rev 05) 00:0f.3 Host bridge: Broadcom GCLE-2 Host Bridge Has anybody experienced anything similar? Is there any new module I need to load for the 2.6.17 kernel to work? I thank you in advance for your help. Best regards, Alberto Ferrante - -- Home page: http://www.alari.ch/people/alberto Public key: http://www.alari.ch/people/alberto/pubkey.txt -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.4 (GNU/Linux) iQIVAwUBRKkzImwAj6ArCn4kAQj1Hg//Unl3W8QOUBAQHSqH38YW5Ppjaq9Ql4D3 ciucaHpbOCUPcacVLWwTnkPzbcUZENTeHzoUr/42Dp65fJEWuGUG+ZwIakdBPkvT I4/p7neth5LM1wNeuo+SHWL+TYgJziYzK3qrBN6+QDZ/UcNur15h7Y+YoAjrMJVZ NQcshzRhTmn391UJkhiWtWPmYUDRS3AkAcwkv+rrO76STQsVajONuqQUwydPAoZl RCbpW34KOcwLVJPIUUv/C7IGJ39M5ukQSh30/vK8uZx9x8o5TNEaGCWV7dNrJDac YkseINjPwLry/ht3HSzV/LUvTdGKtjkTtRM00Em8PEd+tXGrWbIpEdeIJh3MrsQK rNtj//QTIM52CoTSoCnmjG6Qk/eEkQj012Yqcwj6azrnATfgmSnlK8Kan3lTLrMf yILXlOqnXc077tWQmw+8X9eq/wedFEjS1m6IGg/0wOy2+CtKOPInrE15MfZIWQBG HF3+x3uA4vR9Bn2Be3JjS7qcCvSPwcXxjHdG13kLfzdrQ8gtxruFtVi3VGlxtsyh f3ln0GqNbwU3wgvwH5V/KeGY9nDmjL5YhZkcMul9BqYT/XWzJniWrxhcLh9foSOu 6xyzPeVpqmQ3+DW1bsz/ugmdDSBdAWp+daYUcKZZZu1RHGZxmFgS+1h5J54GieS9 P1yMtN8nRdM= =tA9D -----END PGP SIGNATURE-----

2 1

Install from boot.iso - using pmcia card
by Anne Wilson 03 Jul '06

03 Jul '06

I'm still trying to find a way to get FC6t1 onto my old laptop. It seems that it is not happy to boot from home-recorded dvds, although home-recorded cds are fine, so I've now burned boot.iso. The problem now is that it doesn't seem to have a driver for the Netgear FA411 PMCIA ethernet card. (I know it's fully supported, as I have been running FC4 on the laptop.) So far, my attempts at googling have failed to identify the chipset used, so short of trying one or two at random, what else can I try? Anne

1 0

FC5 kernel update to 2.6.17-1.2139_FC5 causing USB broadband problems
by Motor 03 Jul '06

03 Jul '06

My PC uses a Thompson/Alcatel Speedtouch USB 330 modem to connect to Tiscali broadband in the UK. It's been working fine until the recent kernel update to version: kernel-2.6.17-1.2139_FC5. Now after upgrading via yum, the broadband seems to connect ok and work for about a minute and then stop sending and receiving. If I reboot and use the previous kernel-2.6.16-1.2133_FC5, then it works perfectly normally with no problems. I've tried switching between the two kernel versions half a dozen times and seen the same behaviour each time, which seems to rule out random ISP mess ups.

3 3

Kickstart set hostname issues FC5[Scanned]
by Chris Bradford 03 Jul '06

03 Jul '06

Hi guys, I'm trying to setup a way to manually enter a hostname as part of the post install script in my Kickstart file. The process works, but the hostname does not register on our DNS servers *unless* I enter it on the Linux client under System > Administration > Network > Devices > Edit > DHCP Settings > Hostname. The script I am using is: %post #switch to a virtual terminal exec < /dev/tty3 > /dev/tty3 chvt 3 clear #Get Hostname echo -n "Enter Hostname: " echo "" read hostname #Set Hostname cat << EOF >> /etc/sysconfig/network~ NETWORKING=yes HOSTNAME=$hostname EOF cat << EOF >> /etc/hosts~ 127.0.0.1 $hostname localhost.localdomain localhost EOF mv /etc/hosts~ /etc/hosts mv /etc/sysconfig/network~ /etc/sysconfig/network #echo HOSTNAME=$hostname >> /etc/sysconfig/network hostname $HOSTNAME echo "Set Hostname....." #Switch Back to tty1 exec < /dev/tty1 > /dev/tty1 chvt 1 The only thing I can assume is that the hostname is also stored in another file? Everything works fine after I add the hostname into the DHCP settings, until I do that the machine is unresolvable. Any ideas? Cheers -Chris This message has been scanned for viruses by BlackSpider MailControl - www.blackspider.com

1 0

Re: Kyum: /var/log/yum.log, could not be opened for reading.
by ron 03 Jul '06

03 Jul '06

On Sun, 2006-07-02 at 15:24 -0400 ron wrote: >> Hello, >> Kyum says "/var/log/yum.log could not be opened for reading.". >> I can view the yum.log outside of kyum. >> Can anyone help? >> -ron- ON Mon, 03 Jul 2006 08:56:32 +0100 Paul wrote: > If you have SELinux in enforcing mode, what's the output of: > # ls -lZ /var/log/yum.log $(which kyum) > Paul. Paul, SELinux is in enforcing mode. The output of: # ls -lZ /var/log/yum.log $(which kyum) IS: [root@corefive ~]# ls -lZ /var/log/yum.log $(which kyum) -rwxr-xr-x root root system_u:object_r:bin_t /usr/bin/kyum -rw------- root root system_u:object_r:rpm_log_t /var/log/yum.log [root@corefive ~]# -ron-

2 1

Yum update question
by Anne Wilson 03 Jul '06

03 Jul '06

I would have expected that running 'update' would query updates-released, but it appears to query every repo defined. Does it actually offer updates from all of them? Problems with one repo cause update to fail, hence the question. Anne

2 2

Re: kernel-2.6.17-1.2139_FC5 breaks promise drivers for _non-raid_ SATA
by Scott R. Godin 03 Jul '06

03 Jul '06

On Sun, 02 Jul 2006 01:56:30 +0100, Keith G. Robertson-Turner wrote: Scott R. Godin wrote: > > Upgrading to the kernel-2.6.17-1.2139_FC5 release caused the system > > to completely fail to continue booting > > > > filed as > > > > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=197441 > > > > anyone else experience something similar? > Yes ... me and a few others. > > Your bug is a duplicate of: > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=196556 I looked at that one, and I don't believe I'm a complete duplicate. For one thing, I'm not running an SMP kernel, and for another, I'm not using SATA RAID, just a single SATA drive. Lastly, I'm using a Promise SATA controller while the bug reporter was using an Intel Corporation 82801ER (ICH5R). Similar, yes, but also very different. > See also, earlier posts to this list (search:"kernel-2.6.17"). This I can do, though I find the web interface to the mailing list somewhat klunky and badly in need of a better thread-following model. -- Scott Godin, Programmer | p: 302.368.5640 MAD House Graphics | c: 302.750.MAD1 (6231) PO Box 7619, Newark DE 19714 USA | w: www.MadHouseGraphics.com ................................................................... Comprehensive Expertise in Web and Print

1 0

Respin FC5 install with updated kernel
by Sam Varshavchik 03 Jul '06

03 Jul '06

Can someone point me to a guide for respinning the installation FC5 DVD with an updated kernel? It looks like 2.6.17 is the first kernel I can boot on my x86_64 hardware since 2.6.13, which prevented me from upgrading from FC4 to FC5. I need not only to have the updated kernel installed, but also boot Anaconda with an updated kernel image. Also, it looks like FC5 has a unified UP and SMP kernel -- correct?

6 6

how to check the speed of internet on linux
by Yogesh M Chaudhari 03 Jul '06

03 Jul '06

hi guys if any one let me know ,how to check the internet speed on my linux fedora core 3 either by sheell script command or by other free tools

4 3

← Newer
1
...
88
89
90
91
92
93
94
...
97
Older →

Jump to page: