I'm using a Dell L610 to run FC5 (updated), and it has an i915GM controller,
which uses the i810 drivers...
I can't seem to configure it correctly (I've attached the config I'm
using). It
seems to have two issues.
(1) it probes for the monitor DDC sync values, which disagree with what I've
explicitly configured, but looking at the Xorg.0.log file, it gives
no indication
of what the EDID actually said the values were (grrr... you can never
have too
much logging).
(2) it then complains that "1400x1050" isn't a known modeline (no mode of
this name), even though I've explicitly configured a modeline with that
exact setting.
and the second head (in this case, connected to a Dell 1704FPV via DVI
hanging off a port-replicator) never seems to light up.
I've attached both the config and the log file. If anyone has had luck with
this, please let me know.
Thanks,
-Philip
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen0" LeftOf "Screen1"
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
Load "synaptics"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapMove" "110"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Dell"
ModelName "Dell 1400x1050 Laptop Display Panel"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 90.0
VertRefresh 59.0 - 75.0
ModeLine "1400x1050" 108.0 1400 1444 1556 1688 1050 1050 1053 1066
Option "noDDC" "true"
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Dell"
ModelName "Dell 1704FPV (Digital)"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Intel Corporation"
BoardName "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "i810"
VendorName "Intel Corporation"
BoardName "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:1"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection