Removing package and its dependencies
by Paul Smith
Dear All
Is there some way to remove a certain package and its dependencies?
Yum seems to be able to remove only the specified package.
Thanks in advance,
Paul
17 years, 9 months
fc version??
by bruce
hi...
uname -s gives a great deal of information about the kernel...
how can i tell which version of FC i have on a box??
17 years, 9 months
gcc 3.4.X for FC5 ?
by Chris Jones
Hi,
I've been working for a while now on a FC5 box with a project that requires
gcc 3.2.X - I have been able to do this using the compat rpms that provide
the gcc 3.2.3 compiler as "gcc32" etc.
This project is soon to update to gcc 3.4.5 (because they are upgrading from
EL3 to EL4 and they use the default compilers on these platforms) and thus I
need to be able to use gcc 3.4.5 as well.
Unfortunately, I haven't been able to find an equivalent of the compat rms for
gcc 3.4.5 ... Does anything exist providing this, or am I just going to have
to compiler the compiler myself from scratch ?
cheers Chris
17 years, 9 months
Re: Networking Problems
by David G. Miller (aka DaveAtFraud)
DRicher33 <no-reply-gw(a)fcp.homelinux.org> wrote:
>Hi all,
>
>Fairly new to linux and having some problems troubleshooting my internet connection.
>
>For some reason I can't get to the outside world and it's driving me nuts. I can't ping anything outside my localhost. I'm running a static IP address:
>
>IP: xx.xx.128.149
>Sub: 255.255.252.0
>Gateway: xx.xx.128.1
>
>Confirmed with my ISP that those are correct. I've assigned DNS settings properly and confirmed on another machine that the Gateway, DNS servers are working.
>
>Here is what I've done:
>
>1. Reinstalled Fedora Core 5
>2. Turned off the firewall and SELINUX
>3. Tried a different network card with same result.
>
>Am I missing something here? Is this some weird DNS issue?
>
>Any help would be great
>thanks
>
Could you also post a description of your network topology? Something like:
(ISP) <-> Your Router <-> Possible switch or hub <-+-> The linux box
|
+-> Box that works
Mainly, just need to know which box does NAT or if you're swapping
cables so only one box is on-line at any one time.
Cheers,
Dave
--
Politics, n. Strife of interests masquerading as a contest of principles.
-- Ambrose Bierce
17 years, 9 months
Re: Tomcat setup
by Tom Spec
Do you have the local (iptables) firewall running? If so that could be blocking it. Try running:
service iptables stop
Then see if you can connect.
Tom
17 years, 9 months
Question on using projector with Dell Inpiron 6000 & FC5...
by Guillermo de Jesús Hoyos Rivera (gmail)
Dear listers:
I want to make a presentation using a projector. I have FC5,
installed in a Dell Inspiron 6000.
I have tried configuring the double monitor facility, and connecting
a PC monitor to my laptop (both, while the computer is on, and turning on
the computer with the monitor attached to it), and I have had no success.
I have also tried by configuring single monitor in my FC5
installation, and turning on the computer with the monitor attached to it.
Same results.
Finally I have naively tried to use the Fn+F8 key combination (to
redirect the output of the display in Windows). None of the previously
stated tries worked.
Does some one of you know how to do this?
Thanks in advance and best regards.
Guillermo Hoyos.
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.5/403 - Release Date: 28/07/2006
17 years, 9 months
status: eclipse 3.1.2 -> 3.20 on x86_64
by Richard Emberson
What is the status of getting eclipse 3.2.0 to run on
FC5 x86_64? The current FC5 version is 3.1.2.
Thanks
RME
--
This email message is for the sole use of the intended recipient(s) and
may contain confidential information. Any unauthorized review, use,
disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all
copies of the original message.
17 years, 9 months
spam and bad process trace
by Kaushal Shriyan
Hi ALL
I am looking solution for find spamming or bad process script which is
running using tmp location.
/proc/PID give more info.
if i run
ll /proc/* |grep cwd
it will show current working directory
if we try to search ll /proc/* how can we find who is sending spamming
currently
my simple question is i would like to search scripts from tmp and i would
like to trace process from proc/ bad process or spam process.
Thank you,
Kaushal
17 years, 9 months
Re: Syslog setup server on FC5?[Scanned]
by David G. Miller (aka DaveAtFraud)
Phil Meyer <pmeyer(a)themeyerfarm.com> wrote:
>Chris Bradford wrote:
>
>
>>> Hi guys,
>>>
>>> I am trying to figure our how to setup syslog-ng on FC5 and not having
>>> much luck. I have installed syslog-ng using yum.
>>>
>>> I am trying to log from two HP 5308xl switches. The logging facility
>>> on these switches is 'user' but this can be changed.
>>>
>>> I have opened up UDP port 514 on my firewall and enables the syslog-ng
>>> service, but I think I am missing something in the configuration.
>>
>>
>Isn't it just a matter of editing /etc/sysconfig/syslog and adding -r to
>the options?
>
I'm only familiar with syslog but there are typically four steps to
setting up a remote logging facility:
1) On the device that you want to have remotely log you need to tell it
about the server that will be doing the logging. This usually means
setting the host and the logging facility (numeric) to use.
2) On the server that will be doing the logging, edit syslog.conf and
add an entry that maps logging data received on the above numeric
facility to a log file. If you chose facility 5 this will look
something like:
local5.* /var/log/switch.log
3) Also on the server, you need to enable remote logging in
/etc/sysconfig/syslog. See the posting I'm responding to, above.
4) Restart the syslog service on the server.
--
Politics, n. Strife of interests masquerading as a contest of principles.
-- Ambrose Bierce
17 years, 9 months
