users January 2007

users@lists.fedoraproject.org

571 participants
937 discussions

RE: caching nameserver rpmsave not save?
by kwhiskerz kwhiskerz 30 Jan '07

30 Jan '07

Thanks. No output, so supposedly all is well. It works.I suspect, however, that the new files didn't get written because caching-nameserver is chrooted. No way to tell. Dates of the files are old. Very old, some 2004.kwhiskerz{> From: ddmbox2(a)yahoo.co.uk> To: fedora-list(a)redhat.com> Date: Tue, 30 Jan 2007 23:49:47 +0000> Subject: Re: caching nameserver rpmsave not save?> > On Tue January 30 2007 19:30, kwhiskerz kwhiskerz wrote:> > When I went to clean up, not one of the .rpmsave files was there! Where did> > they go?> >> > Does this mean the update failed? Am I running old configuration> > files?kwhiskerz{> >> See what:> sudo rpm -V caching-nameserver> says, this verify's the installation no output is good if you get output I'd > search yum on bugzilla for similar reports and add to or make your own > report.> > ...dex> > > > > > > ___________________________________________________________ > Try the all-new Yahoo! Mail. "The New Version is radically easier to use" The Wall Street Journal > http://uk.docs.yahoo.com/nowyoucan.html> > -- > fedora-list mailing list> fedora-list(a)redhat.com> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list _________________________________________________________________ Get connected - Use your Hotmail address to sign into Windows Live Messenger now. http://get.live.com/messenger/overview

1 0

caching nameserver rpmsave not save?
by kwhiskerz kwhiskerz 30 Jan '07

30 Jan '07

I just updated the system and caching-nameserver-31:9.3.4-1.fc6 showed up. As it updated, yum spit out the following messages: Updating : caching-nameserver [19/38]warning: /etc/named.caching-nameserver.conf saved as /etc/named.caching-nameserver.conf.rpmsave Updating : caching-nameserver [19/38]warning: /etc/named.rfc1912.zones saved as /etc/named.rfc1912.zones.rpmsave Updating : caching-nameserver #################### [19/38]warning: /var/named/localdomain.zone saved as /var/named/localdomain.zone.rpmsave Updating : caching-nameserver #################### [19/38]warning: /var/named/localhost.zone saved as /var/named/localhost.zone.rpmsave Updating : caching-nameserver #################### [19/38]warning: /var/named/named.broadcast saved as /var/named/named.broadcast.rpmsave Updating : caching-nameserver ###################### [19/38]warning: /var/named/named.ca saved as /var/named/named.ca.rpmsave Updating : caching-nameserver ###################### [19/38]warning: /var/named/named.ip6.local saved as /var/named/named.ip6.local.rpmsave Updating : caching-nameserver ###################### [19/38]warning: /var/named/named.local saved as /var/named/named.local.rpmsave Updating : caching-nameserver ###################### [19/38]warning: /var/named/named.zero saved as /var/named/named.zero.rpmsave Updating : caching-nameserver ####################### [19/38] Stopping named: .[ OK ] Starting named: [ OK ] --------------- When I went to clean up, not one of the .rpmsave files was there! Where did they go? Does this mean the update failed? Am I running old configuration files?kwhiskerz{ _________________________________________________________________ Live Search: New search found http://get.live.com/search/overview

2 1

Re: digikam usage
by Paulo Cavalcanti 30 Jan '07

30 Jan '07

> So please, someone who is familiar with it, whats step one, which is to > get it to see the 3GB of pictures in jpeg format that are already stored > there in the path I give for the so called "album"? With a Sony T7, which can be used either as a mass storage (default), or via PTP, I click on "mounted camera" and then I choose "Directory Browse", and set the path to "/media/disk" -- Paulo Roma Cavalcanti LCG - UFRJ

1 0

Re: dma_base is invalid
by Alberto Ferrante 30 Jan '07

30 Jan '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Well, I think I spoke too early:-( After a couple of hours the problem with the IDE drives showed up even with the combined_mode=libata kernel option. I think this is just a problem of the controller driver. Regards, Alberto Alberto Ferrante wrote: > Hi all, > here is an update. It seems that by using the combined_mode=libata > kernel parameter, all the IDE problems are solved. > There are still problems with the USB devices: when a new USB device is > inserted, you sometimes (the first time after the boot for sure, then > occasionally) obtain a CPU soft lockup. Any idea on how to workaround this? - -- Home page: http://www.alari.ch/people/alberto/personal Public key: http://www.alari.ch/people/alberto/pubkey.txt -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQIVAwUBRb/H2WwAj6ArCn4kAQjnfRAAvYKEqk5q5h41EKrPtAfd0lq1GxSb8jug PpRosEwr2XCDE45SFnu/OEfYAllItZykEUCOOX57HFeAEkd3v5dpGeF+EM/kRH2n Aks4eMH8Tx4kfyI2zYfHAtRDWPXeKuBrgiNH4XivqD+MT6/0uXvwkwS3cK78lYss ChyT3380gtcc5dRYMqHPX1M0kl8XkYjEfhPoC00BjkoJJxHHras0RCXYHWso3NO5 ngqtDJmP1zBpZ4eT68gqvunsZHwrcy0ejBymkWIsNoQl8i62ZEe0aXRM6hNsGc4g aWpMy+VZyWp9oruL33G1SG1XVWtlzNR24ln7dSH50ICrNqYm89EmcJzbrEHXMFjy Xg+HeqZHzW1/mzv3tU8Gzlb56SZVhwBrycdE/aOypboGoTGhqJC1fT5ge9T+/bKO +wieCOY5fiPE1T8prxGUEWQvj2O0iEV5sdf1+Lk8JAxITVOBbwOhOl3nEKvdzneU pLTGVpTQfMV/usX0mQH/AVo0ZbvBCVex5PWplde9KkLDLqW8eNnkLFnwn2roAhOk MsYaShlA7+rOk9JzqwEBbLt+IW8UrTag4zLGwjAeoljqaW6VBFxOeuewA4M8LYu9 nsDv7l1Nc4lEkC7kVBZvfc12T9TUpe2W8v01ldSpfvuAVC+EWVFfyA/nzuDpoNBF znLSsfYWqwI= =+x1v -----END PGP SIGNATURE-----

1 0

Re: KVM switch problem
by Michael Klinosky 30 Jan '07

30 Jan '07

I have 2 others that work well. I used a Startech 2 port to switch between a Windows box and a linux box. I currently have a 4 port unit that apparently doesn't have a brand name. It's purple, has 1 button to switch, and its model# is KVM-104 (info sheet also mentions KVM-102).

1 0

Zod Install Failure on Dell PC w Intel/82865G Video
by Jeff G 30 Jan '07

30 Jan '07

Not sure it's due to adapter, but I continually get a failure with new installation on Dell Desktop when it gets to trying to load xorg-x11-fonts-misc-7.1-2.noarch.rpm it says installating xorg-x11-drivers-7.1-3i386 (0 bytes) <note: 0 bytes> x.org x11 driver installation package It says package not found either missing or corrupt. Anyone have any ideas?

1 0

digikam usage
by Gene Heskett 30 Jan '07

30 Jan '07

Greetings; I have always treated my Olympus C3020z as a usb storage device, mounting it as /mnt/camera or in the case if FC6, /media/camera, from whereever it showed up in the logs when I plugged it in and turned it on. Lately its been a race to get the pix out of it before the thing did an auto-off because if you don't clean the battery contacts in the camera, and the batteries aren't above 1.48 volts, it won't live long enough to go through all the rigmarole it takes to get it mounted & copy the pix back out of it, keeping in mind it has the infamous vfat bug that causes all images beyond the current sector of the directory structure to disappear if all the files in that sector have been deleted. Anyway, I just screwed around with digikam this afternoon after seeing some glowing reports about it, long enough to kill two sets of AA cells, without getting digikam to actually access the camera, or display the thumbnails of the images already in the directory I had it pointed to. I wound up using mc as usual, to move the images to my hard drive, in reverse order of course. If digikam is so great, why does everything stay ghosted out regardless of what I do? The menu's apparently assume everything is preconfigured I guess, but they are not exactly intuitive, and no errors are ever reported ANAICT. Like when I selected my camera make & model from the list, and the usb dot is checked, does it report it can't scan '/', which isn't the path to the camera. And when I select "mounted camera" and verify by other means its mounted and visible, it still can't find it. So please, someone who is familiar with it, whats step one, which is to get it to see the 3GB of pictures in jpeg format that are already stored there in the path I give for the so called "album"? -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2007 by Maurice Eugene Heskett, all rights reserved.

1 0

ops, deliverable after all
by kwhiskerz kwhiskerz 30 Jan '07

30 Jan '07

guess those mails WERE deliverable. kept getting denied messages and the mail came back.kwhiskerz{ _________________________________________________________________ Live Search: Better results, fast http://get.live.com/search/overview

1 0

cdrecord problem
by ram 30 Jan '07

30 Jan '07

Hi all i have downloaded FC6 DVD, iam trying to create ISO CD and burning using cdrecord but i get this problem, can some one tell me what is the problem and suggestions to make success writing CD cdrecord -v speed=2 -sao dev=ATA:0,1,0 /root/fc6/386/FC-6-i386-DVD.iso Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM scsidev: 'ATA:0,1,0' devname: 'ATA' scsibus: 0 target: 1 lun: 0 Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'SONY ' Identifikation : 'DVD RW DW-Q30A ' Revision : 'YYS4' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x001B Profile: 0x002B Profile: 0x001B (current) Profile: 0x001A Profile: 0x0016 Profile: 0x0015 Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 Profile: 0x0008 cdrecord: Found DVD media: using cdr_mdvd. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1106176 = 1080 KB FIFO size : 4194304 = 4096 KB Track 01: data 3361 MB Total size: 3860 MB (382:30.49) = 1721287 sectors Lout start: 3861 MB (382:32/37) = 1721287 sectors Current Secsize: 2048 ATIP start of lead out: 157789 (35:05/64) Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 573817 scsi_set_streaming Speed set to 8310 KB/s Starting to write CD/DVD at speed 6.0 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Turning BURN-Free off BURN-Free is OFF. Performing OPC... Sending CUE sheet... *cdrecord: WARNING: Drive returns wrong startsec (0) using -150 *Starting new track at sector: 0 Track 01: 3361 of 3361 MB written (fifo 100%) [buf 99%] 6.4x. Track 01: Total bytes read/written: 3525195776/3525195776 (1721287 sectors). Writing time: 466.988s Average write speed 6.1x. Min drive buffer fill was 95% Fixating... Fixating time: 2.870s cdrecord: fifo had 55526 puts and 55526 gets. cdrecord: fifo was 0 times empty and 18331 times full, min fill was 85%. after this try to mount and see what is there in CD, iam not able to ? ram

3 4

Unable to read audio CDs
by Wil Cooley 30 Jan '07

30 Jan '07

Ever since upgrading my home workstation to FC6 (it's been a while now), I have been unable to read audio CDs, with either grip, the graphical CD player, xmms w/the CD player plugin or Nautilus. (Grip is the main thing I need it for; the others were just testing.) I can mount and read ISO9660 CDs and DVDs just fine and I can burn just fine. The kernel logs this message: kernel: cdrom: This disc doesn't have any tracks I recognize! I have the usual kernel modules loaded: ide_cd 42337 2 cdrom 38625 1 ide_cd The drive is identified as: AOPEN DUW1616/ARR, ATAPI CD/DVD-ROM drive. The only thing slightly funny about this is that my CD/DVD drive is the slave on a single PATA/IDE bus, with my hard drive being the master (newfangled motherboards are shipping with only 1 PATA/IDE channel, expecting people to use SATA for drives). I cannot imagine that should be an issue, because the device works normally with ISO disks. Has anyone seen anything like this? Wil

1 0

← Newer
1
...
10
11
12
13
14
15
16
...
94
Older →

Jump to page: