E17 FC6 possible?
by Charles Fuller
Can someone clarify what steps need to be taken to get enlightenment to
start after install via Didiler's yum install?
I have completed the full installation of the packages from this repo
but am unable to get E17 to startup.
Chuck Fuller
17 years, 1 month
Stuff appearing across my terminal screens..
by Ted Gervais
I just noticed that while I was working in a terminal screen (F1), not in
the GUI that I got a bunch of stuff slowing popping up across my screen.
And at the time I had nothing working or running in the GUI setup. Here is
what I saw. Wondering what it meant??
printk: 137964 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 861120 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 930424 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:001af951
printk: 359880 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 306447 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 540165 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 472922 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 1097844 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 946617 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:001af581
printk: 770387 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cbff
printk: 1163086 messages suppressed.
4gb seg fixup, process beagle-build-in (pid 3861), cs:ip 73:0811cb2a
--
Ted Gervais
Coldbrook, NS Canada
17 years, 1 month
What is the proper way to restart udev?
by Steven W. Orr
I found /sbin/udevstart but there is no udevstop. Can I kill -1 the
running udevd, or do I kill -9 the udevd followed by a udevstart, or do I
have to reboot?
TIA
--
Time flies like the wind. Fruit flies like a banana. Stranger things have .0.
happened but none stranger than this. Does your driver's license say Organ ..0
Donor?Black holes are where God divided by zero. Listen to me! We are all- 000
individuals! What if this weren't a hypothetical question?
steveo at syslang.net
17 years, 1 month
where did server settings go in FC6?
by Amadeus W.M.
What package am I missing in FC6 that I don't have Server Settings in the
gnome menu (System -> Administration -> Server Settings) ?
17 years, 1 month
BIND not resolving some addresses
by Tim
Hi,
Recently I've tried to follow a few links in e-mails and news, to find
the browser couldn't do so. At first I thought it was just the server
being temporarily unavailable, but realised it's BIND. And it's all the
BINDs that I have (the latest available using yum on FC4, FC5 & FC6).
For example, doing a dig on eweek.com it takes ages and eventually
fails. Conversely, doing a dig using my routers resolver, returns
results almost instantly. I don't use it, however, for two reasons: I
use internal DNS servers for the LAN, and my ISP's servers aren't always
very good (don't ask me why, I'm not the one that manages them).
Samples from different BIND servers and the router below. I wonder if
anybody knows why, and whether they get the same effect for that
address? There's about three addresses that I couldn't resolve, but
that's the only one that I can remember, at the moment.
--------------------------------
[tim@serge .gnupg]$ dig eweek.com
; <<>> DiG 9.3.3rc3 <<>> eweek.com
;; global options: printcmd
;; connection timed out; no servers could be reached
--------------------------------
[tim@serge .gnupg]$ dig eweek.com @localhost
; <<>> DiG 9.3.3rc3 <<>> eweek.com @localhost
; (2 servers found)
;; global options: printcmd
;; connection timed out; no servers could be reached
------------------------------
[tim@serge .gnupg]$ dig eweek.com @server
; <<>> DiG 9.3.3rc3 <<>> eweek.com @server
; (1 server found)
;; global options: printcmd
;; connection timed out; no servers could be reached
------------------------------
[tim@serge .gnupg]$ dig eweek.com @router
; <<>> DiG 9.3.3rc3 <<>> eweek.com @router
; (1 server found)
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17304
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;eweek.com. IN A
;; ANSWER SECTION:
eweek.com. 1800 IN A 63.87.252.184
;; Query time: 265 msec
;; SERVER: 192.168.1.254#53(192.168.1.254)
;; WHEN: Tue Jan 9 11:39:51 2007
;; MSG SIZE rcvd: 43
------------------------------
17 years, 1 month
New install of FC6, httpd won't start at boot
by linuxmaillists＠charter.net
httpd fails at boot with no message as to why it failed.
I run
]# service httpd start
and get
Starting httpd: httpd: Syntax error on line 170
of /etc/httpd/conf/httpd.conf: Cannot
load /etc/httpd/modules/mod_access.so into
server: /etc/httpd/modules/mod_access.so: cannot open
shared object file: No such file or directory
[FAILED]
I committed the line and the same thing happened on the next
line.
Someone said that mod_access.so does not exist from FC5 on
so why is this in the conf file if that is correct?
I don't know what else to check to get httpd to start.
Any help will be appreciated,
Jack
--
http://www.mymonavie.com/jackgates/
17 years, 1 month
autofs
by Paulo Cavalcanti
It seems to me that
autofs-5.0.1-0.rc3.2.i386.rpm
is broken.
Anyone else noticed that?
Thanks.
--
Paulo Roma Cavalcanti
LCG - UFRJ
17 years, 1 month
generic HW question about SATA
by mindwave＠cfl.rr.com
Hey,
I'm upgrading my main linux box this weekend. I have about a TB worth of HD's to use, all ATA.
I know that the new standard is SATA, and i actually have ONE SATA drive that I could use if I wanted to (its in a USB box right now).
But never having used SATA, can ATA and SATA be used in the same PC?
For examplecan I have all 4 ATA channels full (3 HD's and a DVDRW) and then activate the SATA channels in BIOS and throw this single drive on the back end as well?
Data-Junky
Thanks
j
17 years, 1 month
YUM doesn't not work
by Sebastian
Would appreciate help in solving this one.
Spent a few days on this problem with no luck.
Can't run yum. I think this is related to my accidental removal of
site-packages.
That i have tried to recover.
This is my first FC post and am not sure if this output is of any use?
[root@localhost rpm]# rpm -qv rpm
rpm-4.4.2-32
[root@localhost rpm]# rpm -Uv python-rpm-4.0.5-1.i386.rpm
error: Failed dependencies:
rpm = 4.0.5 is needed by python-rpm-4.0.5-1.i386
python < 2.3 is needed by python-rpm-4.0.5-1.i386
librpm-4.0.4.so is needed by python-rpm-4.0.5-1.i386
librpmdb-4.0.4.so is needed by python-rpm-4.0.5-1.i386
librpmio-4.0.4.so is needed by python-rpm-4.0.5-1.i386
rpm-python is needed by (installed) yum-3.0-6.noarch
rpm-python >= 4.4 is needed by (installed) smart-0.42-40.fc6.i386
[root@localhost rpm]# rpm -ivh python-rpm-4.0.5-1.i386.rpm
error: Failed dependencies:
rpm = 4.0.5 is needed by python-rpm-4.0.5-1.i386
python < 2.3 is needed by python-rpm-4.0.5-1.i386
librpm-4.0.4.so is needed by python-rpm-4.0.5-1.i386
librpmdb-4.0.4.so is needed by python-rpm-4.0.5-1.i386
librpmio-4.0.4.so is needed by python-rpm-4.0.5-1.i386
[root@localhost rpm]# rpm -qv python-rpm
package python-rpm is not installed
[root@localhost rpm]# yum
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
No module named rpm
Please install a package which provides this module, or
verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.4.4 (#6, Jan 29 2007, 08:40:46)
[GCC 4.1.1 20070105 (Red Hat 4.1.1-51)]
If you cannot solve this problem yourself, please go to
the yum faq at:
http://wiki.linux.duke.edu/YumFaq
17 years, 1 month
httpd driving me crazy.
by Aaron Konstam
When I do a:
services httpd start
I get this error:
[root@saturn conf]# service httpd start
Starting httpd: (98)Address already in use: make_sock: could not bind to
address [::]:80
(98)Address already in use: make_sock: could not bind to address
0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Doing a netstat -pltn gives me:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address
State PID/Program name
tcp 0 0 127.0.0.1:2208 0.0.0.0:*
LISTEN 1900/hpiod
tcp 0 0 0.0.0.0:614 0.0.0.0:*
LISTEN 1704/rpc.statd
tcp 0 0 0.0.0.0:5802 0.0.0.0:*
LISTEN 2096/Xvnc
tcp 0 0 0.0.0.0:5900 0.0.0.0:*
LISTEN 2598/Xorg
tcp 0 0 0.0.0.0:5902 0.0.0.0:*
LISTEN 2096/Xvnc
tcp 0 0 0.0.0.0:111 0.0.0.0:*
LISTEN 1683/portmap
tcp 0 0 0.0.0.0:6002 0.0.0.0:*
LISTEN 2096/Xvnc
tcp 0 0 127.0.0.1:631 0.0.0.0:*
LISTEN 1917/cupsd
tcp 0 0 127.0.0.1:25 0.0.0.0:*
LISTEN 1964/sendmail: acce
tcp 0 0 127.0.0.1:6010 0.0.0.0:*
LISTEN 3923/1
tcp 0 0 127.0.0.1:2207 0.0.0.0:*
LISTEN 1905/python
tcp 0 0 :::6002 :::*
LISTEN 2096/Xvnc
tcp 0 0 :::22 :::*
LISTEN 1932/sshd
tcp 0 0 ::1:6010 :::*
LISTEN 3923/1
Which shows nothing Listening on port 80. One again FC6 has done me in.
Any explanations?
--
Aaron Konstam <akonstam(a)sbcglobal.net>
17 years, 1 month
