users January 2007

users@lists.fedoraproject.org

571 participants
937 discussions

ntfs-3g and rw access to ntfs disks, kernel 2.6.18-1.2869.fc6
by Jonathan Underwood 04 Jan '07

04 Jan '07

Hi, I have installed the ntfs-3g package from Extras, but when I try and mount the ntfs volume (as root), this happens: # ntfs-3g /dev/hda1 /media/windows fusermount: 'fuseblk' support missing; try the kernel module from fuse-2.6.0 or later Failed to create FUSE mount point: No such file or directory Retry to create FUSE mount point ... fusermount: 'fuseblk' support missing; try the kernel module from fuse-2.6.0 or later Failed to create FUSE mount point: No such file or directory ERROR: The FUSE kernel module 2.6.x is not available. Either remove the old FUSE kernel module (use the command 'rmmod fuse') if you have the new one, or compile the new module from the FUSE-2.6.x source package. Please see the FUSE README file and the below web page for more help: http://www.ntfs-3g.org/support.html#fuse26 Unmounting /dev/hda1 () /media/windows exists. I tried chmod 777 /media/windows, no change. I tried setting SElinux to permissive. No joy.I'm a bit out of ideas now. Anyone have any suggestions? This is kernel 2.6.18-1.2869.fc6. Has something gone wrong with kernel builds such that fuseblk support wasn't built in with the latest kernels? This was working on FC-5. Jonathan

3 6

growisofs - burn the file again?
by Dave M 04 Jan '07

04 Jan '07

I am using growisofs to burn DVD's. After burning a file I do diff to see if it was burned properly. If there is an error I try to burn the file again using growisofs. I think growisofs sees that the file is already there and does not try to burn it again. So when I do diff after re-burning I see the same error in the same location. Is there a way to force growisofs (which actually uses mkisofs) to re-burn a file that has the same name as a file that is already on the DVD? My command looks like this: $growisofs -quiet -use-the-force-luke=tty -use-the-force-luke=notray -M /dev/dvd -r -J -T datafiletoburn.dar Also, what is the best way to erase DVD+RW disks? I do not need to wipe all of the data, just clear the file system tables so the disk can be re-used. I am using: dvd+rw-format -force /dev/dvd But I read that this is not good for the media. It may damage the DVD+RW after erasing it a few times? Is there a better way? TIA ------------------------------- Dave M Davem (at) Mich (dot) Com Ann Arbor, Mich. USA Inter-networked computers give you freedom. The "Trusted Computing Platform" could take that freedom away. http://www.eff.org/Infrastructure/trusted_computing/20031001_tc.php

1 0

Cinepaint
by Claude Jones 04 Jan '07

04 Jan '07

Does anyone have Cinepaint running in FC6? I've downloaded the ver 21 tarball and running configure yields up the following toward the very end: checking for gtk-config... no checking for GTK - version >= 1.2.8... no *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. If I run this I see the following gtk stuff installed on my system: $ rpm -qa | grep gtk gtk2-engines-2.8.0-1.fc6 usermode-gtk-1.87-3 libgtk-java-2.8.7-2.fc6 gtkhtml3-3.12.2-1.fc6 gtk-sharp2-2.10.0-3.fc6 gtkspell-2.0.11-2.1 gtk+-1.2.10-55.fc6 authconfig-gtk-5.3.12-1.fc6 pygtk2-2.10.3-3.fc6 gtkhtml2-2.11.0-3 gnome-python2-gtksourceview-2.16.0-1.fc6 gtk-murrine-engine-0.31-1.leofc6 pygtk2-libglade-2.10.3-3.fc6 gtk2-devel-2.10.4-8.fc6 gtk2-2.10.4-8.fc6 gtksourceview-1.8.0-1.fc6 libswt3-gtk2-3.2.1-23.fc6 I could really use the more robust aspects of Cinepaint over the Gimp - does anyone know where I need to go to pursue this? I've tried the rpm search but the most recent rpm I can find is for FC4, which used to run under FC5, but won't install on FC6 with the following errors: Missing Dependency: libIex.so.2 is needed by package cinepaint Missing Dependency: libIlmImf.so.2 is needed by package cinepaint Missing Dependency: libHalf.so.2 is needed by package cinepaint Missing Dependency: libImath.so.2 is needed by package cinepaint Searches on rpmbone and google yield up openEXR packages for those libs - openEXR is already installed on my system, though presumably, not the version I need So, to get back to my question, is this going nowhere, or has someone succeeded in getting Cinepaint to run on FC6? -- Claude Jones Brunswick, MD, USA

2 2

FC6 and acroread - not working
by Florin Andrei 04 Jan '07

04 Jan '07

I got acroread-7.0.5-2.2.fc5.rf.nosrc.rpm from here: http://dries.ulyssis.org/rpm/packages/acroread/info.html I extracted the spec file. I downloaded the latest acroread tar.gz from Adobe, then adjusted the spec for the new version. Then rebuilt the acroread binary package. But when I launch acroread, I get a bunch of messages like this: expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error expr: syntax error Any clue? -- Florin Andrei http://florin.myip.org/

9 9

how to add another mail account in Evolution
by Scott Berry 04 Jan '07

04 Jan '07

What are the steps to add a new account to Evelution please? Scott Scott Berry Scott Berry AIM: electronicman4 Add me to your address book... Want a signature like this?

2 1

Wlan prob - UDP works, ICMP works, TCP doesn't work [long]
by Kai Fürstenberg 04 Jan '07

04 Jan '07

Hello List, I set up FC6 with wlan connection with BCM4318 Chipset. After some probs with wpa_supplicant I finally managed to get it work (as I thought). I also have another box with FC4 as internet gateway (Server) in my local network which has a cabled connection to an access point. The problem is quite strange: I can do nslookup from my workstation with the local server as DNS-Server and get a correct answer. I can ping the server. But I can't establich a SSH-Session to the server. It seems that UDP and ICMP works fine so far, but it is impossible to establish a TCP connection. All iptables-chains are set to ACCEPT for the local network (both server and workstation). Config and proof below. The AP is configuired to use WPA and WPA2 (PSK), TKIP and AES encryption Does anyone know a solution? ---------- [root@eagle ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 GATEWAY=192.168.100.1 TYPE=wireless DEVICE=eth0 HWADDR=00:14:c1:0c:8b:6b BOOTPROTO=static NETMASK=255.255.255.0 DHCP_HOSTNAME= IPADDR=192.168.100.5 DOMAIN= ONBOOT=yes USERCTL=no IPV6INIT=no PEERDNS=yes ESSID=Linux CHANNEL=12 MODE=Managed RATE=54Mb/s ESSID=linux ---------- [root@eagle ~]# cat /etc/sysconfig/wpa_supplicant INTERFACES="-ieth0" DRIVERS="-Dwext" ---------- [root@eagle ~]# cat /etc/wpa_supplicant/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=root network={ ssid="Linux" key_mgmt=WPA-PSK psk="<<secret>>" } ---------- [root@eagle ~]# ifconfig eth0 eth0 Link encap:Ethernet Hardware Adresse 00:14:C1:0C:8B:6B inet Adresse:192.168.100.5 Bcast:192.168.100.255 Maske:255.255.255.0 inet6 Adresse: fe80::214:c1ff:fe0c:8b6b/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:366 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:10277 (10.0 KiB) TX bytes:24487 (23.9 KiB) Interrupt:11 ---------- [root@eagle ~]# iwconfig eth0 eth0 IEEE 802.11b/g ESSID:"Linux" Nickname:"eagle" Mode:Managed Frequency=2.427 GHz Access Point: 00:14:C1:03:F9:10 Bit Rate=11 Mb/s Tx-Power=18 dBm RTS thr:off Fragment thr:off Encryption key:D38B-570C-A4F7-FE37-0E81-A4E2-9EE1-D6DB-8BD4-7610-C141-A079-83B5-FF95-35C0-B90A Security mode:open Link Quality=100/100 Signal level=3/3 Noise level=183/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ---------- [root@eagle ~]# route Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 192.168.100.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default linuxserver 0.0.0.0 UG 0 0 0 eth0 ---------- [root@eagle ~]# nslookup www.redhat.com Server: 192.168.100.1 Address: 192.168.100.1#53 Non-authoritative answer: Name: www.redhat.com Address: 209.132.177.50 ---------- [root@eagle ~]# ping -c2 192.168.100.1 PING 192.168.100.1 (192.168.100.1) 56(84) bytes of data. 64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=1.14 ms 64 bytes from 192.168.100.1: icmp_seq=2 ttl=64 time=1.10 ms --- 192.168.100.1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 999ms rtt min/avg/max/mdev = 1.105/1.122/1.140/0.037 ms ---------- [root@eagle ~]# ntpdate ntp1.ptb.de 4 Jan 22:17:09 ntpdate[2756]: adjust time server 192.53.103.108 offset -0.000217 sec ---------- [root@eagle disk]# nmap -P0 -vvvv linuxserver Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2007-01-04 23:01 CET Initiating ARP Ping Scan against 192.168.100.1 [1 port] at 23:01 The ARP Ping Scan took 0.03s to scan 1 total hosts. Initiating SYN Stealth Scan against linuxserver (192.168.100.1) [1680 ports] at 23:01 The SYN Stealth Scan took 35.92s to scan 1680 total ports. Host linuxserver (192.168.100.1) appears to be up ... good. All 1680 scanned ports on linuxserver (192.168.100.1) are filtered MAC Address: 00:13:D3:12:D4:5E (Micro-star International CO.) Nmap finished: 1 IP address (1 host up) scanned in 36.344 seconds Raw packets sent: 3361 (147.882KB) | Rcvd: 1 (42B) ---------- [root@eagle disk]# dmesg (extract) ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno(a)linux.intel.com> [..] NET: Registered protocol family 23 bcm43xx driver ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 bcm43xx: Chip ID 0x4318, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) bcm43xx: Radio turned off bcm43xx: Radio turned off [..] NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver [..] SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: empty ratesinfo? SoftMAC: empty ratesinfo? ieee80211_crypt: registered algorithm 'WEP' bcm43xx: set security called, .active_key = 0, .level = 1, .enabled = 1, .encrypt = 1 SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: PHY connected bcm43xx: Microcode rev 0x123, pl 0x20 (2004-11-16 07:12:11) bcm43xx: Radio turned on bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 10, high: -38, index: 120) [<c0405876>] dump_trace+0x69/0x1af [<c04059d4>] show_trace_log_lvl+0x18/0x2c [<c0405f83>] show_trace+0xf/0x11 [<c0406080>] dump_stack+0x15/0x17 [<e0a0f6f6>] bcm43xx_phy_lo_adjust+0x1e2/0x221 [bcm43xx] [<e0a11309>] bcm43xx_phy_initb6+0x699/0x7c9 [bcm43xx] [<e0a114e3>] bcm43xx_phy_initg+0xaa/0xd2c [bcm43xx] [<e0a13186>] bcm43xx_phy_init+0x5e5/0x603 [bcm43xx] [<e0a03dff>] bcm43xx_chip_init+0x738/0xa31 [bcm43xx] [<e0a0550e>] wireless_core_up+0x1ad/0x69f [bcm43xx] [<e0a05d7a>] bcm43xx_select_wireless_core+0x37a/0x4c9 [bcm43xx] [<e0a05fb9>] bcm43xx_init_board+0x47/0x11e [bcm43xx] [<c05b1736>] dev_open+0x2b/0x62 [<c05b015a>] dev_change_flags+0x46/0xe3 [<c05ec0e2>] devinet_ioctl+0x250/0x553 [<c05a7036>] sock_ioctl+0x19b/0x1bf [<c047ae67>] do_ioctl+0x1f/0x63 [<c047b0f5>] vfs_ioctl+0x24a/0x25c [<c047b153>] sys_ioctl+0x4c/0x65 [<c0404027>] syscall_call+0x7/0xb DWARF2 unwinder stuck at syscall_call+0x7/0xb Leftover inexact backtrace: ======================= bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 10, high: -38, index: 120) [<c0405876>] dump_trace+0x69/0x1af [<c04059d4>] show_trace_log_lvl+0x18/0x2c [<c0405f83>] show_trace+0xf/0x11 [<c0406080>] dump_stack+0x15/0x17 [<e0a0f6f6>] bcm43xx_phy_lo_adjust+0x1e2/0x221 [bcm43xx] [<e0a12011>] bcm43xx_phy_initg+0xbd8/0xd2c [bcm43xx] [<e0a13186>] bcm43xx_phy_init+0x5e5/0x603 [bcm43xx] [<e0a03dff>] bcm43xx_chip_init+0x738/0xa31 [bcm43xx] [<e0a0550e>] wireless_core_up+0x1ad/0x69f [bcm43xx] [<e0a05d7a>] bcm43xx_select_wireless_core+0x37a/0x4c9 [bcm43xx] [<e0a05fb9>] bcm43xx_init_board+0x47/0x11e [bcm43xx] [<c05b1736>] dev_open+0x2b/0x62 [<c05b015a>] dev_change_flags+0x46/0xe3 [<c05ec0e2>] devinet_ioctl+0x250/0x553 [<c05a7036>] sock_ioctl+0x19b/0x1bf [<c047ae67>] do_ioctl+0x1f/0x63 [<c047b0f5>] vfs_ioctl+0x24a/0x25c [<c047b153>] sys_ioctl+0x4c/0x65 [<c0404027>] syscall_call+0x7/0xb DWARF2 unwinder stuck at syscall_call+0x7/0xb Leftover inexact backtrace: ======================= bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 10, high: -38, index: 120) [<c0405876>] dump_trace+0x69/0x1af [<c04059d4>] show_trace_log_lvl+0x18/0x2c [<c0405f83>] show_trace+0xf/0x11 [<c0406080>] dump_stack+0x15/0x17 [<e0a0f6f6>] bcm43xx_phy_lo_adjust+0x1e2/0x221 [bcm43xx] [<e0a0f4f2>] bcm43xx_phy_init_pctl+0x202/0x224 [bcm43xx] [<e0a120f0>] bcm43xx_phy_initg+0xcb7/0xd2c [bcm43xx] [<e0a13186>] bcm43xx_phy_init+0x5e5/0x603 [bcm43xx] [<e0a03dff>] bcm43xx_chip_init+0x738/0xa31 [bcm43xx] [<e0a0550e>] wireless_core_up+0x1ad/0x69f [bcm43xx] [<e0a05d7a>] bcm43xx_select_wireless_core+0x37a/0x4c9 [bcm43xx] [<e0a05fb9>] bcm43xx_init_board+0x47/0x11e [bcm43xx] [<c05b1736>] dev_open+0x2b/0x62 [<c05b015a>] dev_change_flags+0x46/0xe3 [<c05ec0e2>] devinet_ioctl+0x250/0x553 [<c05a7036>] sock_ioctl+0x19b/0x1bf [<c047ae67>] do_ioctl+0x1f/0x63 [<c047b0f5>] vfs_ioctl+0x24a/0x25c [<c047b153>] sys_ioctl+0x4c/0x65 [<c0404027>] syscall_call+0x7/0xb DWARF2 unwinder stuck at syscall_call+0x7/0xb Leftover inexact backtrace: ======================= bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 10, high: -38, index: 120) [<c0405876>] dump_trace+0x69/0x1af [<c04059d4>] show_trace_log_lvl+0x18/0x2c [<c0405f83>] show_trace+0xf/0x11 [<c0406080>] dump_stack+0x15/0x17 [<e0a0f6f6>] bcm43xx_phy_lo_adjust+0x1e2/0x221 [bcm43xx] [<e0a10534>] bcm43xx_phy_lo_g_measure+0x910/0xaf3 [bcm43xx] [<e0a06bd6>] bcm43xx_periodic_work_handler+0x144/0x33a [bcm43xx] [<c042fa48>] run_workqueue+0x83/0xc5 [<c0430340>] worker_thread+0xd9/0x10d [<c0432807>] kthread+0xc0/0xed [<c0405447>] kernel_thread_helper+0x7/0x10 DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10 Leftover inexact backtrace: ======================= SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels ADDRCONF(NETDEV_UP): eth0: link is not ready SoftMAC: Scanning finished SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Unable to find matching network after scan! SoftMAC: Scanning finished SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Unable to find matching network after scan! bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: generic IE set to dd160050f20101000050f20201000050f20201000050f202 SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Queueing Authentication Request to 00:14:c1:03:f9:10 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:14:c1:03:f9:10. SoftMAC: Open Authentication completed with 00:14:c1:03:f9:10 SoftMAC: sent association request! SoftMAC: associated! ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SoftMAC: Scanning finished SoftMAC: sent association request! bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: associated! ieee80211_crypt: registered algorithm 'TKIP' bcm43xx: set security called, .active_key = 0, .level = 2, .enabled = 1, .encrypt = 1 SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels SoftMAC: Scanning finished SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Scanning finished SoftMAC: Queueing Authentication Request to 00:14:c1:03:f9:10 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:14:c1:03:f9:10. SoftMAC: generic IE set to dd160050f20101000050f20201000050f20201000050f202 SoftMAC: Already associating or associated to 00:14:c1:03:f9:10 SoftMAC: Open Authentication completed with 00:14:c1:03:f9:10 SoftMAC: sent association request! SoftMAC: associated! bcm43xx: set security called, .active_key = 0, .level = 2, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 [..] bcm43xx: set security called, .enabled = 1, .encrypt = 1 eth0: no IPv6 routers present bcm43xx: set security called, .enabled = 1, .encrypt = 1 [..] bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 bcm43xx: set security called, .enabled = 1, .encrypt = 1 Again: All iptables chains within the local network are set to ACCEPT. The connection from Window$ on the same machine (dual boot) works perfect. Greetings Kai

1 0

udev and console.perms
by Peter Horst 04 Jan '07

04 Jan '07

I am trying to set up a headless FC5 system such that I have full use of /dev/mixer, /dev/cdrom, etc., when I login via SSH. Mikkel Ellertson & others were kind enough to provide some clues in an earlier series of emails, which I unfortunately did not save. I tried changing the 'perm' setting in /etc/security/console.perms.d/50-default.perms for the <sound> group, but it had no effect - is it the case that this setting changes only the permissions that are assigned to a user who is concurrently logged in on the console? I may have misunderstood. Any help getting sound up and running on this headless machine as a regular user would be greatly appreciated. Peter

2 2

WARNING: Kernel Errors Present
by Anne Wilson 04 Jan '07

04 Jan '07

Warnings like this crop up regularly in logwatch: Buffer I/O error on device hdc, l ...: 10 Time(s) Buffer I/O error on device hdd, l ...: 20 Time(s) end_request: I/O error, dev hdc, sector ...: 2 Time(s) end_request: I/O error, dev hdd, sector ...: 4 Time(s) hdc: command error: error=0x54 { Ab ...: 2 Time(s) hdc: command error: status=0x51 { D ...: 2 Time(s) hdd: command error: error=0x54 { Ab ...: 4 Time(s) hdd: command error: status=0x51 { D ...: 4 Time(s) They refer to my two DVD drives (and appear whenever the drives have been used). Is there any significance that I should be aware of? Anne

5 7

Various questions
by Anne Harriss 04 Jan '07

04 Jan '07

Please could you tell me how I find what is my "Admin address" to log into these pages? More seriously, I have a problem. My son installed linux Fedora, and wrote down the root password down for me...except that he made a mistake in writing it down, and so I can't download updates, etc. OK, so I need to change the password, and he told me how to do that. Except that when I write the new one, the respons in the Grub command is that it needs authenticating. Well, I don't understand what THAT means. What do I do? A. Harriss

3 2

dd backup unbelievably slow on SATA laptop
by Kevin Kempter 04 Jan '07

04 Jan '07

Hi List; I have FC5 on an IBM Thinkpad Z60m with 2G of RAM and a 100G SATA HD. I also have a removeable CD/DVD drive and I can insert a HD adapter into the "ultrabay" which adds a second HD attached to the main bus (as the CD/DVD would be). I inserted the second 100G ATA HD into the ultrabay and booted into single user mode. The second HD shows up as /dev/hdc my main HD shows up as /dev/sda. (Note if I boot with hdc=noprobe into single user mode then the system is not aware of the root user) I run this: dd if=/dev/sda of=/dev/hdc bs=64K & pid=$! Note: I've tried the same with bs=128K, bs=1M, bs=256K and with no bs tag at all with the same results Then I check the progress from time to time with this: kill -USR1 $pid I find that my avg speed in 1.7m/sec which leads to a full backup time of around 16-17 hours. Before the deal with M$ I used to run SuSE 10 and was able to do a dd on the same laptop inside of 4 hours. Any help would be much appreciated.... Thanks in advance

5 10

← Newer
1
...
82
83
84
85
86
87
88
...
94
Older →

Jump to page: