SATA optical drives
by David Fletcher
I'm currently running FC5, will probably upgrade to F7 in a couple of months.
Unfortunately my CD/DVD rewriter appears to have died, before it's
even seen a dual layer disk :'(
SATA hard drives run without problems for me, but now that SATA
optical drives are starting to appear in the shops, would it be OK to
buy one of these and get rid of another wide ribbon cable?
Is anybody already running them with Fedora?
Thanks for any advice/experiences.
Dave F
3 months
[FC8] ssh and CAC card???
by Todd Denniston
From what I understood, the change to openssh listed in:
rpm -q --changelog openssh |less
as:
"* Wed Jun 20 2007 Tomas Mraz <tmraz(a)redhat.com> - 4.5p1-7
- experimental NSS keys support
- correctly setup context when empty level requested (#234951)
"
was supposed to allow the Common Access Card (CAC) to work with the shipped
Fedora 8 ssh.
As per NSS usual, everything is undocumented, i.e., `ssh-add --help` does not
help at all, and `man ssh-add` points to `ssh-add -s reader`
# ssh-add -s 0
Enter passphrase for smartcard:
SSH_AGENT_FAILURE
Could not add card: 0
# ssh-add -s 1
Enter passphrase for smartcard:
SSH_AGENT_FAILURE
Could not add card: 1
So does anyone know how to use the possible functionality, or are we reduced
to reading the source?
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
1 year, 2 months
Changing date with procmail
by Michael A. Peters
Anyone know of a procmail recipe to change the date on incoming
messages?
If the date is in the future by more than 24 hours - I'd like to just
change it to the current date.
If the date is in the past by more than two weeks - I'd like to just
change it to the current date.
I'd like to do it in procmail - if someone knows how.
I've done some searching, still have some to do.
Found some stuff on extracting the date, but not on modifying it if
necessary.
1 year, 3 months
Re: Backing up system
by gmspro
Hi,
http://www.sysresccd.org/Download
With the SystemRescueCd I backed up the /dev/sda6 partition in /mnt/backup/ naming "diskimage"
After backing up operation the file has the automatic extension like "diskimage.000".
Is this file ok to restore?
If I name it "diskimage.gz" then it is automatically renamed with this extension "diskimage.gz.000"
But here below
http://www.sysresccd.org/Screenshots
the file is name like this:
"diskimage.pimg"
Do I have to name with the .pimg extension during backup to restore correctly?
And how can I restore it?
2 years, 7 months
VPN options
by Keith Lofstrom
I am planning on running a Virtual Private Network from my Fedora
firewall out to a UML virtual colo (running RH9) at another site.
That site will be the place I present services to the world;
httpd, ssh, sftp, smtp. This is to comply with the "no servers"
and dynamic ip restrictions on my Comcast connection to the net;
if my firewall always drives an outbound connection to the
colocation site, I am not worried about changes of ip address,
and I am not opening any inbound ports.
There are a number of options for the VPN - the most attractive
are cipe ( http://sites.inka.de/sites/bigred/devel/cipe.html )
and FreeSwan ( http://www.freeswan.org/ ), though I am told that
one can do all this through an ssh tunnel. I would rather have
simple and secure than super-duper; I have plenty of bandwidth,
and will send outbound http and smtp from the firewall, so the
main bandwidth user will be incoming spam/b/b/b/b mail.
Anyone have some experiences to share about setting up VPN? Is
there anything about either cipe or FreeSwan that is likely to
break with FC1 or FC2?
Keith
--
Keith Lofstrom keithl(a)ieee.org Voice (503)-520-1993
KLIC --- Keith Lofstrom Integrated Circuits --- "Your Ideas in Silicon"
Design Contracting in Bipolar and CMOS - Analog, Digital, and Scan ICs
3 years, 10 months
Problems with 3COM 3C900Combo
by Christian Moller
Hi all Fedora users,
I have just joined this list. I am running the latest Fedora but I can't get
my 3C900Combo networking card to work. I can see that the card is installed
but no IP-address is asigned to it and I can't set it. So I think that there
is a bug in that driver. Any other user out there who have a solution for
this?
Best regards and thanks,
Christian
8 years, 3 months
RAGE XL Framebuffer
by Yanick Quirion
Hi all
I know that is not a specific question about Fedora, but I can't find answer on the kernel mailing list.
Is somebody having server with integrated ATI RAGE XL video card? Is it possible to patch the kernel to support this video card? If I add VGA=791 in my grub.conf, I will have a resolution of 1024x768 which is good, but the display is very slow (especially when the screen is scrolling). If I use I this: "video=aty128fb:1024x768@70" it will not work. I'm using kernel 2.4.22 but I will try 2.6.0-test11 today.
If somebody has a patch, a link or anything else that can help me, it will be appreciated.
Thanks for your help.
Regards,
-----------
Yanick Quirion
Administrateur Réseau/Network Manager
NEOKIMIA INC.
Institut de Pharmacologie de Sherbrooke
3e étage (Édifice Z5)
3001 12e avenue Nord
Sherbrooke, Québec
CANADA
J1H 5N4
Tél.: +1 819 820-6040
Direct: +1 819 820-6855
Fax.: +1 819 820-6841
email: Yanick.Quirion(a)neokimia.com
8 years, 3 months
Soundblaster
by Antonio Montagnani
I have two similar PC (old Pentium but workin fine)
In Pc no.1 I upgraded from RH8 to Fedora and it went fine: Soundblaster
is working fine
In Pc no.2 I made a fresh installation but in redhat-sound-config Fedora
doesn't see any card, that was working on Redhat 9 after soundconfig...
Where is the trick?? I assume that my Sounblaster is an old 16...but
fine on a router/firewall.
Tnx
Antonio
8 years, 3 months
Alpine will not show attachments
by Tom Diehl
Hi,
I am running alpine-2.00-1.fc10.x86_64 on an F10 box. If I get a message with
an html or file attachment and I try to open it, I get an error that
"Firefox can't find the file at /tmp/img--46112.htm" The correct program opens
up but I always get the can't find file errors. If the message contains a URL
then it comes up and displays properly.
Does anyone know how to troubleshoot this problem?
Regards,
--
Tom Diehl tdiehl(a)rogueind.com Spamtrap address mtd123(a)rogueind.com
12 years, 4 months
SMS server/gateway
by Jamie Bohr
I am looking for a SMS server software for RHEL.
The phones we use can receive email but it does not always get to the phone
in a timely manner and sometimes I get "connected refused" when trying to
send messages via email. I've looked at smstools and Googled around but
would like the forums opinion on what they have used and experiences.
Thank you for your time,
--
Jamie Bohr
13 years, 6 months
