users May 2009

users@lists.fedoraproject.org

346 participants
443 discussions

Why Can't I run 2 X servers on the same machine?
by Derek Tattersall 04 May '09

04 May '09

I would like to set up 2 seats on my PC, with 2 mice, 2 keyboards and 2 monitors. It is running f9, and the nvidia driver version 180.51. I spent a few hours messing around with it, and I got it almost working. I have an nvidia graphics GeForce 8500 card, and it works just fine as a dual-head card. I can also run 2 X servers on different VTs when the card is configured with dual heads. The problem comes when I try to run 2 X servers, one on each of the 2 monitors. So I modified the xorg.conf file to have 2 different server layouts, one for each monitor. It works perfectly when I try to run each server layout independently. It fails when I try to run tehm both at once. I get this error in my Xorg.0.log file: /var/log/Xorg.0.log:(EE) NVIDIA(0): EVO Push buffer channel allocation failed /var/log/Xorg.0.log:(EE) NVIDIA(0): *** Aborting *** /var/log/Xorg.0.log:(EE) NVIDIA(0): Failed to allocate EVO DMA push buffer /var/log/Xorg.0.log:(EE) NVIDIA(0): *** Aborting *** Can anyone tell me what this error means? Thanks. Derek Tattersall

1 0

Re: Fedora 11 fail because of Anaconda
by Jayson Rowe 03 May '09

03 May '09

On 05/03/2009 11:01 PM, fedora-list-request(a)redhat.com wrote: > Re: Fedora 11 fail because of Anaconda I commented on the blog-post as well (saw that first). I'm on real hardware, and I've installed on two machines without issue. I don't use LVM, but I have 3 hard drives. First drive: 150G 10kRPM gets /boot (ext2) / (ext4) /home (ext4) and SWAP Second Drive: 320G gets /virtuals (ext4) Third Drive: 1TB gets /data (ext4) On my laptop, which has a single drive gets /boot (ext2) / (ext4) and /home (ext4) Install went great on both systems. Did a clean install because I'm a new (well, returning I guess, but it's been since FC2/FC3T2) Fedora user from the (horrid) land of Ubuntu :-) I *did* however run into an issue trying to install the x86_64 LiveCD in a KVM virtual machine - it (is the live installer still Anaconda?) crashed even leaving the defaults alone. I need to try it again and make note of the specific error, but I was in a rush when trying it, and just planned to come back too it later after 2 failed attempts at the same exact spot. I wish I had another physical system here I could sacrifice for testing, but I do hope this gets worked out soon if lots of people are seeing this - we need all the users on F11 as we can get before it goes Gold! -jayson

1 0

Need help with Reboot cause
by Peter J. Stieber 03 May '09

03 May '09

This is going to sound vague, but here goes... I have a dual opteron system that has been acting as the worldly node for a small cluster of computers since September, 2004. The machine is running the latest x86_64 Fedora 10 kernel that I recently loaded (April 2). The machine reboots without warning. I can't find the cause in log files (maybe I'm not looking in the correct log). I'm currently running memtest. If all of the tests pass, could the community suggest other diagnostic tasks or information I could post to help diagnose the problem? I wish I could be more specific, Pete

9 27

USB tuner and kernel.org
by Mick M. 03 May '09

03 May '09

Hello list; I recently bought an Autumn Wave OnAir HDTV USSB tuner. I read the pvrusb2 driver setup information. I am logged in as "mick" KDE. In an xterm as root: [root@localhost ~]# uname -a Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux Under F10 it fails with: [root@localhost ~]# tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /root/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. [root@localhost ~]# xawtv This is xawtv-3.95, running on Linux/x86_64 (2.6.27.21-170.2.56.fc10.x86_64) xinerama 0: 1440x900+0+0 WARNING: No DGA direct video mode for this display. can't open /dev/video0: No such file or directory v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: No such file or directory v4l: open /dev/video0: No such file or directory no video grabber device available [root@localhost ~]# kdetv /usr/bin/iceauth: creating new authority file /root/.ICEauthority kbuildsycoca running... ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL kdetv: could not connect to socket kdetv: No such file or directory [root@localhost ~]# v4l-conf v4l-conf: using X11 display :0.0 dga: version 2.0 WARNING: No DGA direct video mode for this display. mode: 1440x900, depth=24, bpp=32, bpl=5760, base=unknown can't open /dev/video0: No such file or directory [root@localhost ~]# ls -l /dev/video* ls: cannot access /dev/video*: No such file or directory [root@localhost ~]# depmod pvrusb2 WARNING: Can't read module pvrusb2: No such file or directory But: [root@localhost ~]# lsmod Module Size Used by pvrusb2 138896 0 dvb_core 84380 1 pvrusb2 cx2341x 19332 1 pvrusb2 v4l2_common 18560 2 pvrusb2,cx2341x videodev 40704 1 pvrusb2 v4l1_compat 21380 2 pvrusb2,videodev tveeprom 21508 1 pvrusb2 xt_limit 11140 8 iptable_mangle 11392 0 ipt_LOG 13828 8 ipt_MASQUERADE 11264 0 nf_nat 25496 1 ipt_MASQUERADE xt_DSCP 11776 0 nf_conntrack_irc 14392 0 nf_conntrack_ftp 16696 0 fuse 60992 2 bridge 56352 0 stp 10756 1 bridge bnep 21888 2 sco 19204 2 l2cap 28544 3 bnep bluetooth 59940 5 bnep,sco,l2cap sunrpc 191080 3 ip6t_REJECT 12160 2 nf_conntrack_ipv6 22984 2 ip6table_filter 11136 1 ip6_tables 26128 1 ip6table_filter ipv6 287784 38 ip6t_REJECT,nf_conntrack_ipv6 dm_multipath 23704 0 uinput 16128 0 snd_hda_intel 480032 4 snd_seq_dummy 11396 0 arc4 10240 2 snd_seq_oss 39232 0 ecb 11264 2 snd_seq_midi_event 14848 1 snd_seq_oss snd_seq 61968 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event crypto_blkcipher 24196 1 ecb snd_seq_device 15380 3 snd_seq_dummy,snd_seq_oss,snd_seq rt61pci 28288 0 snd_pcm_oss 52224 0 ata_generic 14084 0 rt2x00pci 14848 1 rt61pci rt2x00lib 43648 2 rt61pci,rt2x00pci snd_mixer_oss 23168 1 snd_pcm_oss snd_pcm 85640 2 snd_hda_intel,snd_pcm_oss rfkill 17188 1 rt2x00lib pata_acpi 13184 0 snd_timer 30352 2 snd_seq,snd_pcm snd_page_alloc 16656 2 snd_hda_intel,snd_pcm mac80211 214128 2 rt2x00pci,rt2x00lib snd_hwdep 16392 1 snd_hda_intel snd 68984 18 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep k8temp 13056 0 r8169 40964 0 hwmon 11064 1 k8temp cfg80211 32656 2 rt2x00lib,mac80211 i2c_piix4 18448 0 soundcore 14992 1 snd firewire_ohci 30468 0 pcspkr 11008 0 shpchp 38300 0 mii 13056 1 r8169 i2c_core 29216 4 pvrusb2,v4l2_common,tveeprom,i2c_piix4 firewire_core 45504 1 firewire_ohci eeprom_93cx6 10368 1 rt61pci pata_atiixp 13824 0 floppy 66216 0 wmi 14912 0 crc_itu_t 10240 2 rt61pci,firewire_core [root@localhost ~]# lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 11ba:1101 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I then downloaded the latest kernal from kernal.org, configured and compiled it When I boot it I get "cannot find /dev/root" Has anyone got this thing to work? How do you compile tyhe new kernels? Thanks Mick M.

2 1

Re: f10dvd installs but won't boot
by Jackson Byers 03 May '09

03 May '09

jbyers reply 2) I next tried allowing the f10 install on sda1 have grub install into mbr of sda, thus replacing the fc5 grub into mbr of sda5. <<<<<<<<<<<typo should be mbr of sda sda5 doesnt even exist Jack

1 0

Any package for DSPAM?
by Nick Urbanik 03 May '09

03 May '09

Dear Folks, Are there any packages built of DSPAM? Any yum repositories? I'd rather not reinvent someone else's wheel! -- Nick Urbanik http://nicku.org nicku(a)nicku.org GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24

1 0

F9: Unable to get SVN/Apache working
by Dan Thurman 03 May '09

03 May '09

Previous posting broken off from thread: "F9: Eclipse plug: Subversive SVN does not work?" I posted previously thinking that there was a problem with eclipse/netbeans, but it was not. I have decided to create a new thread focusing exclusively on SVN/Apache issues, thus this "new" posting. To make a long story short, I have been able to get my SVN working with the svnserve daemon and it works. However, I am unable to get SVN/Apache to work. My SVN repository directory structure is: =========================== /svn --> /f-App1/Develop/SC/svn /f-App1/Develop/SC/svn: apache passwords svnauthz.conf [ # cat svnauthz.conf : [groups] home = user1.user2,user3 [/] * = r [svn3:/] * = @home = rw ] repos svn1 svn2 svn3 svn4 Note: 1) All selinux contexts of dir/files are: httpd_sys_content_t 2) All directory permissions are: 2770 3) All file permissions are: 660 4) All svn[1-4]/conf files are linked to apache/files for svnserve daemon svnserve authz passwd svnserve.conf =========================== I have created a simple apache construct in /etc/httpd/conf.d/subversion.conf as: =========================== <Location /svn> DAV svn SVNParentPath /svn/repos # AuthzSVNAccessFile /svn/apache/svnauthz.conf # AuthUserFile /svn/apache/passwords # AuthType Basic # AuthName "Authorization Required" # Require valid-user # Satisfy any </Location> =========================== Starting httpd, results in error_log as: =========================== [Sun May 03 13:24:42 2009] [notice] caught SIGTERM, shutting down [Sun May 03 10:24:44 2009] [notice] core dump file size limit raised to 4294967295 bytes [Sun May 03 10:24:44 2009] [notice] SELinux policy enabled; httpd running as context unconfined_u:system_r:httpd_t:s0 [Sun May 03 10:24:44 2009] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Sun May 03 10:24:46 2009] [notice] Digest: generating secret for digest authentication ... [Sun May 03 10:24:46 2009] [notice] Digest: done [Sun May 03 10:24:46 2009] [notice] mod_python: Creating 4 session mutexes based on 150 max processes and 0 max threads. [Sun May 03 10:24:46 2009] [notice] mod_python: using mutex_directory /tmp [Sun May 03 13:24:47 2009] [notice] Apache/2.2.9 (Unix) DAV/2 mod_auth_kerb/5.3 mod_auth_pgsql/2.0.3 Line-Edit/1.0.0 mod_nss/2.2.9 NSS/3.12.2.0 PHP/5.2.6 mod_python/3.3.1 Python/2.5.1 mod_scgi/1.13 mod_ssl/2.2.9 OpenSSL/0.9.8g SVN/1.4.6 mod_apreq2-20090110/2.7.1 mod_wsgi/2.1-BRANCH mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations [Sun May 03 13:25:11 2009] [error] avahi_client_new() failed: An unexpected D-Bus error occured ============================= Note: I have tried to resolve the avahi_client_new() error above but unable to fix it. No response from Fedora community as to what this error might mean. I have removed all extra avahi packages, short of removing too many dependencies. So, for the moment I have ignored this error. Also, as appeared in the original posting, Apache's mod_security was reporting "errors", so I removed mod_security so that these messages do not appear for the purpose of testing and getting svn/apache setup right before adding it back in. Tested svn using Firefox, using URL: http://localhost/svn/svn3/: =================== Revision 2: / * branches/ * tags/ * trunk/ Powered by Subversion version 1.4.6 (r28521). =================== But httpd error_log shows: =================== [Sun May 03 14:00:56 2009] [error] [client 127.0.0.1] Could not fetch resource information. [301, #0] [Sun May 03 14:00:56 2009] [error] [client 127.0.0.1] (84)Invalid or incomplete multibyte or wide character: Requests for a collection must have a trailing slash on the URI. [301, #0] =================== However, it seems to work. I can walk down the trees to the leafs and no further error_log messsages appear. Next, I tested svn on the command line: =================== $ svn list http://gold/svn/svn3 svn: PROPFIND request failed on '/svn/svn3' svn: PROPFIND of '/svn/svn3': 403 Forbidden (http://gold) =================== And httpd error_log shows: =================== $ svn list http://localhost/svn/svn3 svn: PROPFIND request failed on '/svn/svn3' svn: PROPFIND of '/svn/svn3': 403 Forbidden (http://localhost) =================== I have at this point, tried almost every permutations of changing dir/file permissions, relocating the repositories to: /var/www and to /var/www/html, modifying subversion.conf, checked apache permissions (Allow from all) in /etc/httpd/conf/httpd.conf & subversion.conf files, checked the firewalls (they are wide open) and I could never get past the PROPFIND, 403 Forbidden problem. I cannot think of anything else to try, so I am at a stand-still. Can someone help? Thanks! Dan

2 1

Re: f10dvd installs but won't boot
by Jackson Byers 03 May '09

03 May '09

frank cox wrote jackson byers wrote: > reinstalled f10dvd media ck said ok Any chance you could re-post your question using complete words and sentences, and a complete description of what you have done and what you expect to see, and what you actually see? I read your message four times and I still have no idea what you're actually doing. Are you trying to install F10 on a machine that already has F5 installed on it, without overwriting the F5 installation? Describe your current setup, what you want to do, and what you have tried. Include complete error messages (if any). --------------- jbyers: sorry I wasn't clearer; I was trying to not be so verbose Yes, I am trying to install F10 onto sda1 on a machine that already has Fc5 installed on it on sdb6 , without overwriting the Fc5 installation. Every install attempt of f10, I use custom partitioning, and only format sda1 as ext3. My fc5 remains available. I previously had a thread where I was trying to use a fedoraliveinstall cd to install, and never could get it to boot, even tho the install said it was successful. I won't repeat everything I tried with the liveinstall cd, because my experiences then and now are much the same, installs, but no boot. I am trying the same thing now with a f10dvd. 1)I first tried to keep the fc5 in control of the mbr on sda and hence using fc5 grub.conf to have a stanza for f10 copied directly from the f10 install grub.conf This gives me : Error 2 bad file or directory. If I instead use a stanza for f10 root (hd0,0) chainloader +1 then I get error msgs: cant access resume device (sda/sdb2) mount: error mounting /dev/root on /sysroot no such file or directory 2) I next tried allowing the f10 install on sda1 have grub install into mbr of sda, thus replacing the fc5 grub into mbr of sda5. This does not give me Error2 as in 1) above but instead the same errors as in chainloader +1 in 1) above: cant access resume device (sda/sdb2) mount: error mounting /dev/root on /sysroot no such file or directory 2a)appending "scsi_mod.scan=sync" to the kernel line did not give me those last 2 msgs, but instead flashed an entire screen of boot msgs, which then disappeared, screen went blank I hope this makes it clearer. Jack

1 0

f10dvd installs but won't boot
by Jackson Byers 03 May '09

03 May '09

I am out of ideas, using a purchased osdisc fedora 10 dvd reinstalled f10dvd media ck said ok this time using minimum options and this time accepting default of mbr sda install said successful but on reboot get exactly same errors as seen previously when f10 grub into sda1 notmbr , (then was using fc5 grub in mbr sda) this time there should have been no connection at all to my fc5 on sdb6 but get same boot error: cant access resume device (/dev/sdb2) mount: error mounting /dev/root on /sysroot no such file or directory so my hopes that my troubles were my old fc5 grub version .97-5 was confusing f10 hence preventing f10 booting, seem not to be the issue. I did find one suggestion on fedora common problems or? "to edit the kernel argument and append "scsi_mod.scan=sync" so i use knoppixcd to get my fc5 back: in grub root(hd1,5) setup(hd0) which is where i am now for this email, and mount the new installed f10 and edit its grub.conf as above then went back to knoppixcd root(0,1) setup(0) to get back to f10 knoppixcd out then rebooted again this time the f10dvdinst boot attempt does _not_ give me that dev/root one line error but instead a whole screen of boot msgs but then screen quickly goes completely blank, no response have to hit power button this last response says appending "scsi_mod.scan=sync" had some effect but I have no idea what else to try. Are there other scsi issues I should be aware of re f10? My sda, sdb are both scsi disks help, please I really would like to dump fc5, but i need a booting f10 Jack

4 3

Problem with bittorrent on f10
by Louis Garcia 03 May '09

03 May '09

When using transmission on F10 I occasionally get input/output errors with a torrent I'm downloading. Only one spacific torrent is affected, It's large and taking a few weeks to download. This is what I get in the logs: May 3 18:22:42 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:42 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:42 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:42 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:42 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:42 localhost kernel: ata1.00: error: { UNC } May 3 18:22:43 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:43 localhost kernel: ata1: EH complete May 3 18:22:44 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:44 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:44 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:44 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:44 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:44 localhost kernel: ata1.00: error: { UNC } May 3 18:22:45 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:45 localhost kernel: ata1: EH complete May 3 18:22:46 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:46 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:46 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:46 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:46 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:46 localhost kernel: ata1.00: error: { UNC } May 3 18:22:47 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:47 localhost kernel: ata1: EH complete May 3 18:22:47 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:47 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:47 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:47 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:47 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:47 localhost kernel: ata1.00: error: { UNC } May 3 18:22:48 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:48 localhost kernel: ata1: EH complete May 3 18:22:49 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:49 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:49 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:49 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:49 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:49 localhost kernel: ata1.00: error: { UNC } May 3 18:22:50 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:50 localhost kernel: ata1: EH complete May 3 18:22:51 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:51 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:51 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:51 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:51 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:51 localhost kernel: ata1.00: error: { UNC } May 3 18:22:52 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:52 localhost kernel: sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK May 3 18:22:52 localhost kernel: sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] May 3 18:22:52 localhost kernel: Descriptor sense data with sense descriptors (in hex): May 3 18:22:52 localhost kernel: 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 May 3 18:22:52 localhost kernel: 5b 95 e5 72 May 3 18:22:52 localhost kernel: sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed May 3 18:22:52 localhost kernel: end_request: I/O error, dev sda, sector 1536550258 May 3 18:22:52 localhost kernel: ata1: EH complete May 3 18:22:52 localhost kernel: sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) May 3 18:22:52 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off May 3 18:22:53 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:53 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:53 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:53 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:53 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:53 localhost kernel: ata1.00: error: { UNC } May 3 18:22:54 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:54 localhost kernel: ata1: EH complete May 3 18:22:55 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:55 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:55 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:55 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:55 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:55 localhost kernel: ata1.00: error: { UNC } May 3 18:22:56 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:56 localhost kernel: ata1: EH complete May 3 18:22:57 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:57 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:57 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:57 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:57 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:57 localhost kernel: ata1.00: error: { UNC } May 3 18:22:58 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:22:58 localhost kernel: ata1: EH complete May 3 18:22:59 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:22:59 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:22:59 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:22:59 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:22:59 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:22:59 localhost kernel: ata1.00: error: { UNC } May 3 18:23:00 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:23:00 localhost kernel: ata1: EH complete May 3 18:23:01 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:23:01 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:23:01 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:23:01 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:23:01 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:23:01 localhost kernel: ata1.00: error: { UNC } May 3 18:23:02 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:23:02 localhost kernel: ata1: EH complete May 3 18:23:03 localhost kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 3 18:23:03 localhost kernel: ata1.00: BMDMA stat 0x24 May 3 18:23:03 localhost kernel: ata1.00: cmd 25/00:08:6c:e5:95/00:00:5b:00:00/e0 tag 0 dma 4096 in May 3 18:23:03 localhost kernel: res 51/40:00:72:e5:95/40:00:5b:00:00/e0 Emask 0x9 (media error) May 3 18:23:03 localhost kernel: ata1.00: status: { DRDY ERR } May 3 18:23:03 localhost kernel: ata1.00: error: { UNC } May 3 18:23:04 localhost kernel: ata1.00: configured for UDMA/133 May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] May 3 18:23:04 localhost kernel: Descriptor sense data with sense descriptors (in hex): May 3 18:23:04 localhost kernel: 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 May 3 18:23:04 localhost kernel: 5b 95 e5 72 May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed May 3 18:23:04 localhost kernel: end_request: I/O error, dev sda, sector 1536550258 May 3 18:23:04 localhost kernel: ata1: EH complete May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off May 3 18:23:04 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

2 1

← Newer
1
...
38
39
40
41
42
43
44
45
Older →

Jump to page: