users September 2009

users@lists.fedoraproject.org

385 participants
535 discussions

Fedora 11 boot faisl on md with two HBAs
by S Murthy Kambhampaty 03 Sep '09

03 Sep '09

With Fedora 11 on IBM x3650 M2 (x86_64), I am having problems booting after adding a second, add-in, SAS controller with 12 SAS disks in an external enclosure. Without the add-in SAS controller, the system boots fine and provides file sharing over samba, etc. The main problem with this machine is that it has an EFI BIOS which appears to bind the external/add-on SAS HBA before the internal one on which the system drives are hosted (they are both LSI SAS 3801e HBAs - the internal one has an IBM part number, while the external one is LSI). Changing the BIOS order in the option ROMs and disabling boot services on the external/add-on HBA does not seem to affect the adapter binding order, and the EFI BIOS does not provide any mechanism for controlling this. Which brings us to the bootup issues. Note that after booting into rescue mode from the installer image mdadm works as expected, with raid arrays detected and started without any problems on the disks located on both controllers. The md configuration is : /boot is on /dev/md0 with devices /dev/sd[mn]3, raid1 /root is on /dev/md1 with devices /dev/sd[op]2, raid1 /usr, /var and swap are on an LVM vg on /dev/md2 with devices /dev/sd[m-p]2, raid10 /boot/efi is on /dev/md64 with devices /dev/sd[mn]2, raid1 A separate vg for the data volume is on /dev/md127 with devices /dev/sd[a-l], raid6 (whole disks) /dev/sd[m-p] are hosted on the internal HBA, and appear as /dev/sd[a-d] when the add-in HBA is disabled. /dev/sd[a-l] hang of the add-in HBA. Note that in rescue mode, the disks start at /dev/sdc, as I'm booting from a virtual console, and /dev/sda and /dev/sdb are assigned to virtual USB disks. The problem seems to be that during bootup the raid arrays are autodetected rather than using mdadm. If the raid456 module is not included in the initrd image, booting fails with raid6 personality not detected, when the boot process tries to start /dev/md1 incrementally with /dev/sda as its first member. (This appears not to reference /etc/mdadm.conf in the initrd at all.) If the raid456 module is included in the initrd image (using --with=raid456), booting fails with /dev/sda added incrementally to /dev/md1 and /dev/sdb added incrementally to /dev/md2; it appears autodetect fails because the raid device was built from rescue mode, so the components are listed with different letters in the superblock. If I put a line in /etc/mdadm.conf in the initird image, to only scan partitioned disks (DEVICE /dev/sd*[1234]), boot hangs after loading the raid modules. (Potentially on the call to mkblkdevs after scsi_wait_scan is rmmod-ed.) This seems to suggest that the md devices are being started by kernel raid autodetection rather than mdadm. Simply switching to mdamd would likely solve the problem, given it works fine in rescue mode. Alternative suggestions are welcome, of course. I will try partitioning the 12 disks, with ext2 partitions rather than raid-auto partitions, to see if this gets me past this issue. However, it would be nice to be able to create the raid devices on whole disks, and avoid the extra step. Thanks for the help, Murthy

1 0

Re: Argh!! Html is on again!
by g 02 Sep '09

02 Sep '09

Patrick O'Callaghan wrote: > In fact it was multipart/signed, sorry. accepted. my apoligies for not reading full thread be for replying to your post to my reply. in addition, i agree 100% with anne. no email client should have 'text/html' as a default. -- peace out. tc,hago. g . **** in a free world without fences, who needs gates. ** help microsoft stamp out piracy - give linux to a friend today. ** to mess up a linux box, you need to work at it. to mess up an ms windows box, you just need to *look* at it. ** learn linux: 'Rute User's Tutorial and Exposition' http://rute.2038bug.com/index.html 'The Linux Documentation Project' http://www.tldp.org/ 'LDP HOWTO-index' http://www.tldp.org/HOWTO/HOWTO-INDEX/index.html 'HowtoForge' http://howtoforge.com/ ****

2 2

Re: Argh!! Html is on again!
by g 02 Sep '09

02 Sep '09

Patrick O'Callaghan wrote: > Looks like you forgot to turn it off before sending the above :-) actually, that is 'quoted-printable'. -- peace out. tc,hago. g . **** in a free world without fences, who needs gates. ** help microsoft stamp out piracy - give linux to a friend today. ** to mess up a linux box, you need to work at it. to mess up an ms windows box, you just need to *look* at it. ** learn linux: 'Rute User's Tutorial and Exposition' http://rute.2038bug.com/index.html 'The Linux Documentation Project' http://www.tldp.org/ 'LDP HOWTO-index' http://www.tldp.org/HOWTO/HOWTO-INDEX/index.html 'HowtoForge' http://howtoforge.com/ ****

3 4

In the news: Soon to be published, Skype back-door trojan code?
by Dan Thurman 02 Sep '09

02 Sep '09

[perhaps off topic, but interesting security implications?] I wonder if backdoors are installed to comply with government & law enforcement requirements. In the US, Sen. Jay Rockefeller proposes to allow the POTUS to shutdown public & private Internet for any reason they want? Well back to Skype in the news: http://www.theregister.co.uk/2009/08/28/skype_trojan_source_code/ Fact or hype? FWIW, Dan

16 33

Re: Sound does not work
by Adil Adil 02 Sep '09

02 Sep '09

Hi it still does not work. this time the command did give any errors when run. I don't know what you mean by quiting X, if you mean X window I think i did it because i rebooted the computer. I don't know what the command you gave me was intended to do but here is the result of the diff command between the previous version of alsa-info.txt and the new one and below you'll find the entire new alsa-info content: ------------- 6c6 < !!Script ran on: Sun Aug 30 18:41:46 UTC 2009 --- > !!Script ran on: Wed Sep 2 23:22:47 UTC 2009 222,230c222,230 < crw-rw----+ 1 root root 116, 7 Aug 30 11:26 /dev/snd/controlC0 < crw-rw----+ 1 root root 116, 10 Aug 30 11:26 /dev/snd/controlC1 < crw-rw----+ 1 root root 116, 6 Aug 30 11:28 /dev/snd/pcmC0D0c < crw-rw----+ 1 root root 116, 5 Aug 30 11:28 /dev/snd/pcmC0D0p < crw-rw----+ 1 root root 116, 4 Aug 30 11:26 /dev/snd/pcmC0D1c < crw-rw----+ 1 root root 116, 9 Aug 30 11:26 /dev/snd/pcmC1D0c < crw-rw----+ 1 root root 116, 8 Aug 30 11:26 /dev/snd/pcmC1D0p < crw-rw----+ 1 root root 116, 3 Aug 30 11:26 /dev/snd/seq < crw-rw----+ 1 root root 116, 2 Aug 30 11:26 /dev/snd/timer --- > crw-rw----+ 1 root root 116, 7 Sep 2 17:12 /dev/snd/controlC0 > crw-rw----+ 1 root root 116, 10 Sep 2 17:12 /dev/snd/controlC1 > crw-rw----+ 1 root root 116, 6 Sep 2 18:59 /dev/snd/pcmC0D0c > crw-rw----+ 1 root root 116, 5 Sep 2 18:59 /dev/snd/pcmC0D0p > crw-rw----+ 1 root root 116, 4 Sep 2 17:12 /dev/snd/pcmC0D1c > crw-rw----+ 1 root root 116, 9 Sep 2 17:12 /dev/snd/pcmC1D0c > crw-rw----+ 1 root root 116, 8 Sep 2 17:12 /dev/snd/pcmC1D0p > crw-rw----+ 1 root root 116, 3 Sep 2 17:12 /dev/snd/seq > crw-rw----+ 1 root root 116, 2 Sep 2 17:12 /dev/snd/timer 967d966 < ac97_bus 968a968 > ac97_bus 971a972,974 > arc4 > ecb > crypto_blkcipher 979d981 < sdhci_pci 981,987c983 < sdhci < firewire_ohci < firewire_core < yenta_socket < crc_itu_t < rsrc_nonstatic < arc4 --- > zd1211rw 989,994c985 < mii < mmc_core < pcspkr < ecb < crypto_blkcipher < joydev --- > sdhci_pci 996c987 < zd1211rw --- > yenta_socket 998c989,992 < cfg80211 --- > pcspkr > mii > rsrc_nonstatic > firewire_ohci 999a994,999 > sdhci > mmc_core > cfg80211 > firewire_core > crc_itu_t > joydev 1010c1010 < firewire_core: created device fw0: GUID 00e01800034c8845, S400 --- > Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 1012c1012 < intel8x0_measure_ac97_clock: measured 50452 usecs --- > intel8x0_measure_ac97_clock: measured 50468 usecs ------------- here is the content of my new alsa-info.txt file: ----------------------- upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.58 !!################################ !!Script ran on: Wed Sep 2 23:22:47 UTC 2009 !!Linux Distribution !!------------------ Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) !!DMI Information !!--------------- Manufacturer: NEC Computers International Product Name: Z94T !!Kernel Information !!------------------ Kernel release: 2.6.27.25-170.2.72.fc10.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: 1.0.20 Utilities version: 1.0.20 !!Loaded ALSA modules !!------------------- snd_intel8x0 snd_intel8x0m !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes aRts: Installed - Yes (/usr/bin/artsd) Running - No Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [SI7012 ]: ICH - SiS SI7012 SiS SI7012 with AD1888 at irq 18 1 [Modem ]: ICH-MODEM - SiS SI7013 Modem SiS SI7013 Modem at irq 18 !!PCI Soundcards installed in the system !!-------------------------------------- 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:02.7 0401: 1039:7012 (rev a0) Subsystem: 1631:c013 !!Modprobe options (Sound related) !!-------------------------------- snd-card-0: index=0 snd-intel8x0: index=0 !!Loaded sound module options !!-------------------------- !!Module: snd_intel8x0 ac97_clock : 0 ac97_quirk : <NULL> buggy_irq : N buggy_semaphore : N enable : N id : <NULL> index : 0 joystick : 0 spdif_aclink : 0 xbox : N !!Module: snd_intel8x0m ac97_clock : 0 enable : N id : <NULL> index : -2 !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Analog Devices AD1888 PCI Subsys Vendor: 0x1631 PCI Subsys Device: 0xc013 Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Double rate slots: 10/11 Extended ID : codec=0 rev=0 AMAP LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : SPCV LDAC SDAC CDAC SPDIF=3/4 SPDIF VRA PCM front DAC : 44100Hz PCM Surr DAC : 44100Hz PCM LFE DAC : 44100Hz PCM ADC : 44100Hz SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=44.1kHz AD18XX configuration Unchained : 0x1000,0x0000,0x0000 Chained : 0x0000,0x0000,0x0000 0:00 = 0090 0:02 = 9f9f 0:04 = 0000 0:06 = 0008 0:08 = 0000 0:0a = 0000 0:0c = 801f 0:0e = 0006 0:10 = 8383 0:12 = 0808 0:14 = 0000 0:16 = 9f9f 0:18 = 0808 0:1a = 0505 0:1c = 0f0f 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 03c7 0:2a = 05c5 0:2c = ac44 0:2e = ac44 0:30 = ac44 0:32 = ac44 0:34 = 0000 0:36 = 9f80 0:38 = 9f9f 0:3a = 0824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 8080 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 1001 0:76 = 6000 0:78 = 0000 0:7a = 0000 0:7c = 4144 0:7e = 5368 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root root 116, 7 Sep 2 17:12 /dev/snd/controlC0 crw-rw----+ 1 root root 116, 10 Sep 2 17:12 /dev/snd/controlC1 crw-rw----+ 1 root root 116, 6 Sep 2 18:59 /dev/snd/pcmC0D0c crw-rw----+ 1 root root 116, 5 Sep 2 18:59 /dev/snd/pcmC0D0p crw-rw----+ 1 root root 116, 4 Sep 2 17:12 /dev/snd/pcmC0D1c crw-rw----+ 1 root root 116, 9 Sep 2 17:12 /dev/snd/pcmC1D0c crw-rw----+ 1 root root 116, 8 Sep 2 17:12 /dev/snd/pcmC1D0p crw-rw----+ 1 root root 116, 3 Sep 2 17:12 /dev/snd/seq crw-rw----+ 1 root root 116, 2 Sep 2 17:12 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Modem [SiS SI7013 Modem], device 0: Intel ICH - Modem [SiS SI7013 Modem - Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SI7012 [SiS SI7012], device 1: Intel ICH - MIC ADC [SiS SI7012 - MIC ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Modem [SiS SI7013 Modem], device 0: Intel ICH - Modem [SiS SI7013 Modem - Modem] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [SI7012] Card hw:0 'SI7012'/'SiS SI7012 with AD1888 at irq 18' Mixer name : 'Analog Devices AD1888' Components : 'AC97a:41445368' Controls : 45 Simple ctrls : 31 Simple mixer control 'Master',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 23 [74%] [-12.00dB] [on] Simple mixer control 'Master Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-46.50dB] [off] Front Right: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Headphone Jack Sense',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 23 [74%] [0.00dB] [on] Front Right: Playback 23 [74%] [0.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-46.50dB] [off] Front Right: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Surround Jack Mode',0 Capabilities: enum Items: 'Shared' 'Independent' Item0: 'Shared' Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 28 [90%] [7.50dB] [off] Capture [off] Front Right: Playback 28 [90%] [7.50dB] [off] Capture [off] Simple mixer control 'Line Jack Sense',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 23 [74%] [0.00dB] [on] Capture [off] Front Right: Playback 23 [74%] [0.00dB] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 25 [81%] [3.00dB] [on] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958 Playback AC97-SPSA',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 3 Mono: 0 [0%] Simple mixer control 'IEC958 Playback Source',0 Capabilities: enum Items: 'AC-Link' 'A/D Converter' Item0: 'AC-Link' Simple mixer control 'Aux',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 15 [100%] [22.50dB] [on] Front Right: Capture 15 [100%] [22.50dB] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Channel Mode',0 Capabilities: enum Items: '2ch' '4ch' '6ch' Item0: '2ch' Simple mixer control 'Downmix',0 Capabilities: enum Items: 'Off' '6 -> 4' '6 -> 2' Item0: 'Off' Simple mixer control 'Exchange Front/Surround',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'High Pass Filter Enable',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'Spread Front to Surround and Center/LFE',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'V_REFOUT Enable',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [Modem] Card hw:1 'Modem'/'SiS SI7013 Modem at irq 18' Mixer name : 'Conexant id 23' Components : 'AC97m:43585423' Controls : 2 Simple ctrls : 2 Simple mixer control 'Caller ID',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Off-hook',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] !!Alsactl output !!------------- --startcollapse-- state.SI7012 { control.1 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Master Surround Playback Switch' value.0 false value.1 false } control.2 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Surround Playback Volume' value.0 0 value.1 0 } control.3 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Center Playback Switch' value false } control.4 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Center Playback Volume' value 31 } control.5 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'LFE Playback Switch' value false } control.6 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'LFE Playback Volume' value 0 } control.7 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Surround Playback Switch' value.0 false value.1 false } control.8 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Surround Playback Volume' value.0 0 value.1 0 } control.9 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Master Playback Switch' value.0 true value.1 true } control.10 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value.0 31 value.1 31 } control.11 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Master Mono Playback Switch' value true } control.12 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Mono Playback Volume' value 23 } control.13 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Phone Playback Switch' value false } control.14 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Phone Playback Volume' value 0 } control.15 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Playback Switch' value true } control.16 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Mic Playback Volume' value 25 } control.17 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Boost (+20dB)' value false } control.18 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Line Playback Switch' value.0 false value.1 false } control.19 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Line Playback Volume' value.0 28 value.1 28 } control.20 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'CD Playback Switch' value.0 true value.1 true } control.21 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'CD Playback Volume' value.0 23 value.1 23 } control.22 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Aux Playback Switch' value.0 false value.1 false } control.23 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Aux Playback Volume' value.0 0 value.1 0 } control.24 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'PCM Playback Switch' value.0 true value.1 true } control.25 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'PCM Playback Volume' value.0 23 value.1 23 } control.26 { comment.access 'read write' comment.type ENUMERATED comment.count 2 comment.item.0 Mic comment.item.1 CD comment.item.2 Video comment.item.3 Aux comment.item.4 Line comment.item.5 Mix comment.item.6 'Mix Mono' comment.item.7 Phone iface MIXER name 'Capture Source' value.0 Mix value.1 Mix } control.27 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Capture Switch' value.0 true value.1 true } control.28 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 15' comment.dbmin 0 comment.dbmax 2250 iface MIXER name 'Capture Volume' value.0 15 value.1 15 } control.29 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Mic1 comment.item.1 Mic2 iface MIXER name 'Mic Select' value Mic1 } control.30 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.31 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 } control.32 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0082000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.33 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value true } control.34 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 3' iface MIXER name 'IEC958 Playback AC97-SPSA' value 0 } control.35 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 AC-Link comment.item.1 'A/D Converter' iface MIXER name 'IEC958 Playback Source' value AC-Link } control.36 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Exchange Front/Surround' value true } control.37 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'V_REFOUT Enable' value true } control.38 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'High Pass Filter Enable' value true } control.39 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Spread Front to Surround and Center/LFE' value false } control.40 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Off comment.item.1 '6 -> 4' comment.item.2 '6 -> 2' iface MIXER name Downmix value Off } control.41 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Shared comment.item.1 Independent iface MIXER name 'Surround Jack Mode' value Shared } control.42 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 '2ch' comment.item.1 '4ch' comment.item.2 '6ch' iface MIXER name 'Channel Mode' value '2ch' } control.43 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Headphone Jack Sense' value false } control.44 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Line Jack Sense' value false } control.45 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'External Amplifier' value true } } state.Modem { control.1 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Off-hook Switch' value false } control.2 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Caller ID Switch' value false } } --endcollapse-- !!All Loaded Modules !!------------------ Module fuse sco bridge stp bnep l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv6 ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables ipv6 p4_clockmod dm_multipath uinput snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_seq_dummy ac97_bus snd_seq_oss snd_seq_midi_event snd_seq arc4 ecb crypto_blkcipher snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc zd1211rw sis900 sdhci_pci serio_raw yenta_socket mac80211 pcspkr mii rsrc_nonstatic firewire_ohci video sdhci mmc_core cfg80211 firewire_core crc_itu_t joydev output asus_laptop ata_generic pata_acpi pata_sis !!ALSA/HDA dmesg !!------------------ Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ALSA sound/pci/ac97/ac97_codec.c:2122: AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50468 usecs -- Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ALSA sound/pci/ac97/ac97_codec.c:2154: MC'97 1 converters and GPIO not ready (0xff00) device-mapper: multipath: version 1.0.5 loaded ------------------------ > The examples in the man page are incorrect. After > some experimentation, > here is the command to run: > > amixer -c 0 cset numid=33 value=false > > Same request. If it sets it, try sound. If it > doesn't, report error. > > I don't think you do, but you might have to log in and out > of X to pick > up the change. > > If there is still no sound after the change, we'll start > looking at > pulseaudio settings and configuration. > __________________________________________________________________ Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now http://ca.toolbar.yahoo.com.

2 1

start location for windows
by SternData 02 Sep '09

02 Sep '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 When I start a new program in Gnome, it positions the new window at the top left of the screen. Is there a way to tell it to use some other location (e.g., center)? - -- Steve -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/ iEYEARECAAYFAkqdRGgACgkQeERILVgMyvD3gQCbBr+2jC/Jzu0aI9v0CEPIPekS cgQAn1Lh0Bs+3h64TyK7FBiH1jgZOA9J =0IIX -----END PGP SIGNATURE-----

5 4

Amarok Cover Manager Dead
by Richard Heck 02 Sep '09

02 Sep '09

I don't know when it started, but as of today, anyway, amarok's cover manager just doesn't work at all. No matter what I do, it won't find any covers. Has amazon changed the API again? rh

4 6

Just installed F11 on top of Suse 11.1 but can't boot Fedora.
by Nat Gross 02 Sep '09

02 Sep '09

On an exisiting station running Suse 11.1, I installed Fedora 11 into a new partition, leaving the previous partitions intact. I told Anaconda to install the boot info into this same partition. I was hoping that I can use the new Fedora system, and in case of emergency look stuff up on the older partitions. Anyhow, upon reboot, Grub presents me with the same old menu as before I installed Fedora 11. So I fired up Suse's boot mainteneance gui, which has an option to "look for and merge other grub installations", and sure enough it found the new Fedora 11 partition (in addition to many older kernels' boot info). The problem is that upon selecting F11, grub display chainloader+1, the cpu box whistles, and that's that. It seems like a minor thing for folks that know grub. I don't :). Here is a copy of /boot/grub/menu.lst: (Please excuse if I should not have posted all of it.) ----------------------------------------- # Modified by YaST2. Last modification on Wed Sep 2 18:32:03 EDT 2009 default 0 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,0)/message ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 11.1 root (hd0,0) kernel /vmlinuz root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd ###Don't change this comment - YaST2 identifier: Original name: xen### title XEN root (hd0,0) kernel /xen.gz module /vmlinuz-xen root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 module /initrd-xen ###Don't change this comment - YaST2 identifier: Original name: Fedora (2.6.29.6-217.2.16.fc11.i686.PAE) (/dev/mapper/nvidia_fcdefcfd_part8)### title Fedora (2.6.29.6-217.2.16.fc11.i686.PAE) (/dev/mapper/nvidia_fcdefcfd_part8) rootnoverify (hd0,7) chainloader +1 ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 11.1 root (hd0,0) kernel /vmlinuz root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 showopts ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x346 initrd /initrd ###Don't change this comment - YaST2 identifier: Original name: linux### title Kernel-2.6.27.29-0.1-default root (hd0,0) kernel /vmlinuz-2.6.27.29-0.1-default root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd-2.6.27.29-0.1-default ###Don't change this comment - YaST2 identifier: Original name: linux### title Kernel-2.6.27.29-0.1-xen root (hd0,0) kernel /vmlinuz-2.6.27.29-0.1-xen root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd-2.6.27.29-0.1-xen ###Don't change this comment - YaST2 identifier: Original name: linux### title Kernel-xen root (hd0,0) kernel /vmlinuz-xen root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd-xen ###Don't change this comment - YaST2 identifier: Original name: linux### title Kernel-2.6.25-14.fc9.i686 root (hd0,0) kernel /vmlinuz-2.6.25-14.fc9.i686 root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd ###Don't change this comment - YaST2 identifier: Original name: linux### title Kernel-2.6.25.9-76.fc9.i686 root (hd0,0) kernel /vmlinuz-2.6.25.9-76.fc9.i686 root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd ###Don't change this comment - YaST2 identifier: Original name: linux### title Kernel-2.6.27.29-0.1-pae root (hd0,0) kernel /vmlinuz-2.6.27.29-0.1-pae root=/dev/disk/by-id/raid-nvidia_fcdefcfd-part7 resume=/dev/disk/by-id/raid-nvidia_fcdefcfd-part5 splash=silent showopts vga=0x346 initrd /initrd-2.6.27.29-0.1-pae ----------------------------------------- And here is a screenshot of their gui, listing Fedora 11 third. http://picasaweb.google.com/nat101L/LinuxSnapshots#5377003389525497330 Thank you all. nat

1 0

convert ico to svg or png
by Gerhard Magnus 02 Sep '09

02 Sep '09

Does anyone know a program for FC11 that will convert Windows icon files (.ico) into a format accepted by gnome (.svg or .png)?

3 3

Sound sharing via network
by Hiisi 02 Sep '09

02 Sep '09

Dear List! Recently I had been generously suggested by yours of how to set up NAT on my small home network. Now I have 3 computers on it: the main F11 desktop, connected directly to the Web and 2 laptops: one running Ubuntu, while the other (my brother's) utilize window$. F11 shares not only Web for the rest of the network. It shares its USB printer. I also have Apache running on it for experiments with web-programming and ftp for movies sharing between all machines. All that are individual steps to tune my SuperBuperF11 home server. To finish the project I would like F11 to share its sound system – two speakers. I would like to configure it so that I could play songs or watching movies on any laptop while sound goes from F11 speakers. Is it possible at all? Especially in case of window$? Please don't blame me. Just curious. Respectfully -- Hiisi. Registered Linux User #487982. Be counted at: http://counter.li.org/

1 0

Jump to page: