users September 2010

users@lists.fedoraproject.org

300 participants
353 discussions

weird firefox behavior, any ideas?
by Tom Horsley 10 Sep '10

10 Sep '10

Here's the strange case: When I have an active NX connection from my home system (running the nomachine nxclient) to my work system (running the freenx server from the fedora repos), firefox (on home system) slows to a crawl. Things like expanding or collapsing a sidebar bookmark item sit there for several seconds after I click on an item. I thought this might be something like dynamic libraries needing relocation to conflicting addresses, but if I start firefox first to get the libraries loaded, the existing instance of firefox slows down after I start NX. I'm not doing anything weird to my network (that I know of - maybe NX is doing something behind my back), and I'm operating through a ssh forwarded connection, not starting a VPN or anything like that. A network monitor shows the normal traffic due to NX at around 3K bps, so I'm clearly not bogging down the network, and I have 8 gig of memory on this system, almost all of which is free, so I'm not running out of memory either. Nothing else on the system goes funny in the head, it seems to be just firefox. Any ideas out there?

1 0

java (sun), java-openjdk and java-gcj
by Walter Cazzola 10 Sep '10

10 Sep '10

Dear all, On my Fedora 13 machine I've to use the sun/oracle jdk distribution. To install and configure this is not a problem (downloaded the bin from the sun web site and run it). But we I try to install something based on java (e.g., antlr, javassist, bcel, ...) yum always proposes to install either java-1.5.0-gcj or java-1.6.0-openjdk as java wasn't installed at all. For several reasons I'm bound to a specific version of sun JVM (v1.5) and I can't use the other virtual machines I've correctly set JAVA_HOME, CLASSPATH and PATH so I suppose it isn't a problem to have several virtual machines installed but I'd like to have a clean installation without useless software (it is a production guest for virtual box with few space at disposal). So there is a way to convince yum that I've installed java and to use it when I'll try to add some java related software? Thanks a lot Walter -- Walter Cazzola, PhD - Assistant Professor, DICo, University of Milano E-mail cazzola(a)dico.unimi.it Ph.: +39 02 503 16300 Fax: +39 02 503 16253 · · · ---------------------------- · · · ---------------------------- · · · ... recursive: adjective, see recursive ... · · · ---------------------------- · · · ---------------------------- · · ·

2 1

Fwd: Suspend/Hibernate
by Stefan Stoikos 09 Sep '10

09 Sep '10

what a surprise! right now i had an update. i haven't these problems anymore! thank you guys! -------- Original Message -------- Subject: Suspend/Hibernate Date: Thu, 09 Sep 2010 19:48:56 +0200 From: Stefan Stoikos <stefan.stoikos(a)gmail.com> To: users(a)lists.fedoraproject.org hello everybody i have installed F13 on my old ibm thinkpad t41. everything works fine just the suspend/hibernation not. every time i suspend my thinkpad he hangs and i can not do anything. did anybody have an idea what this could be about? thanks a lot, with best regards stefan stoikos

4 3

Suspend/Hibernate
by Stefan Stoikos 09 Sep '10

09 Sep '10

hello everybody i have installed F13 on my old ibm thinkpad t41. everything works fine just the suspend/hibernation not. every time i suspend my thinkpad he hangs and i can not do anything. did anybody have an idea what this could be about? thanks a lot, with best regards stefan stoikos

1 0

how to load a module
by Adel ESSAFI 09 Sep '10

09 Sep '10

Hi list I have a script that have successully compiled and installed a module for a tv card [root@localhost ~]# ls /usr/src/kernels/2.6.34.6-47.fc13.i686/kernel/drivers/media/video/ easycap.ko but fails to load it how can I do to load that module [root@localhost easycap_dc60.0.8.2]# modprobe easycap FATAL: Module easycap not found. regards Adel -- PhD candidate in Computer Science Address 3 avenue lamine, cité ezzahra, Sousse 4000 Tunisia tel: +216 97 246 706 (+33640302046 jusqu'au 15/6) fax: +216 71 391 166

3 7

Configuring my UC-LOGIC Tablet WP5540U on Fedora 13?
by Ankur Sinha 09 Sep '10

09 Sep '10

hi, I was using my tablet as per this howto[1] on F12. Since F13 no longer uses hal and needs xorg configuration etc. as per[2]. Can someone please tell me how to configure my tablet on F13? I found this[3] but I'm still not pretty sure how to proceed. *** My dmesg output *** usb 2-1: new low speed USB device using uhci_hcd and address 10 usb 2-1: New USB device found, idVendor=5543, idProduct=0004 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Tablet WP5540U usb 2-1: Manufacturer: UC-LOGIC input: UC-LOGIC Tablet WP5540U as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input17 generic-usb 0003:5543:0004.0009: input,hidraw0: USB HID v1.00 Mouse [UC-LOGIC Tablet WP5540U] on usb-0000:00:1d.0-1/input0 Thanks, [1] > http://fedorasolved.org/Members/ankursinha/tablets-on-f12-using-wizardpen/d… [2] > http://fedoraproject.org/wiki/Input_device_configuration [3] > http://ubuntu-virginia.ubuntuforums.org/showthread.php?t=1467457 -- Thanks! Regards, Ankur https://fedoraproject.org/wiki/User:Ankursinha "FranciscoD"

1 0

Cannot rebuild from src.rpm
by Paul Smith 09 Sep '10

09 Sep '10

Dear All, I am trying to rebuild a rpm from its src.rpm, but getting the following error: $ rpmbuild --clean --rebuild myp-devel-0.14-0.src.rpm Installing myp-devel-0.14-0.src.rpm warning: user stewart does not exist - using root warning: group stewart does not exist - using root warning: user stewart does not exist - using root warning: group stewart does not exist - using root error: File /home/paulus/rpm/SOURCES # Where the tarballs and patches go./myp-devel-%{PACKAGE_VERSION}-%{PACKAGE_RELEASE}.tar.gz: No such file or directory $ Any ideas? Thanks in advance, Paul

6 6

Onboard/Built-in mic not functional
by Silent-Hunter 09 Sep '10

09 Sep '10

External mic works fine, as does everything else except the internal mic. Soundcard is ATI Technologies Inc SBx00 Azalia (Intel HDA).

1 0

GPM and Links with fb
by Silent-Hunter 09 Sep '10

09 Sep '10

When I try to run Links with graphics and framebuffer enabled, GPM won't move the arrow in Links. It just moves a grey square around, revealing the console underneath, as if Links wasn't even there. Has anyone else encountered this?

1 0

X crashes on diskless NFS mounted / filesystem
by Robert Arkiletian 09 Sep '10

09 Sep '10

Fully updated F13 kernel 2.6.34.6-47.fc13.x86_64 I have even tried upgrading to xorg-x11-drv-intel 2.12 from koji ajax build (no joy) The boot process fails launching X. It keeps showing init.orig: prefdm main process ended respawning init.orig: prefdm main process [1913] terminated with status 1 until it says respawning too fast, stopped I have tried setting an xorg.conf file and also without it (no joy) I have posted xorg.conf /var/log/Xorg.0.log dmesg below. Please help if you know how to solve this as it's for a school. Thanks # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # keyboard added by system-config-display Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105+inet" Option "XkbLayout" "us" EndSection Section "Device" Identifier "Videocard0" Driver "intel" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Xorg.0.log [ 40.790] X.Org X Server 1.8.2 Release Date: 2010-07-01 [ 40.790] X Protocol Version 11, Revision 0 [ 40.790] Build Operating System: x86-16 2.6.32-44.el6.x86_64 [ 40.790] Current Operating System: Linux drbl213 2.6.34.6-47.fc13.x86_64 #1 SMP Fri Aug 27 08:56:01 UTC 2010 x86_64 [ 40.790] Kernel command line: initrd=initrd-pxe.img devfs=nomount drblthincli=off selinux=0 nomodeset BOOT_IMAGE=vmlinuz-pxe [ 40.790] Build Date: 03 August 2010 05:10:46AM [ 40.790] Build ID: xorg-x11-server 1.8.2-3.fc13 [ 40.790] Current version of pixman: 0.18.0 [ 40.790] Before reporting problems, check http://bodhi.fedoraproject.org/ to make sure that you have the latest version. [ 40.790] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 40.790] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 8 19:29:31 2010 [ 40.794] (==) Using config file: "/etc/X11/xorg.conf" [ 40.794] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 40.794] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 40.794] (==) ServerLayout "single head configuration" [ 40.794] (**) |-->Screen "Screen0" (0) [ 40.794] (**) | |-->Monitor "<default monitor>" [ 40.795] (**) | |-->Device "Videocard0" [ 40.795] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 40.795] (**) |-->Input Device "Keyboard0" [ 40.795] (==) Automatically adding devices [ 40.795] (==) Automatically enabling devices [ 40.795] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 40.795] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 40.795] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 40.795] (II) *************************************************************** *************************************************************** ** Fedora switched to udev-based device detection with ** ** xorg-x11-server-1.7.99.901-1. Custom HAL configuration ** ** stored in /etc/hal/fdi/policy will not be seen by this ** ** server version. If you have such configuration you will ** ** need to update it to the new format. ** ** For more information, see the Fedora wiki page ** ** https://fedoraproject.org/wiki/Input_device_configuration ** *************************************************************** *************************************************************** [ 40.795] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 40.795] (WW) Disabling Keyboard0 [ 40.795] (II) Loader magic: 0x7cfa40 [ 40.795] (II) Module ABI versions: [ 40.795] X.Org ANSI C Emulation: 0.4 [ 40.795] X.Org Video Driver: 7.0 [ 40.795] X.Org XInput driver : 9.0 [ 40.795] X.Org Server Extension : 3.0 [ 40.810] (--) PCI:*(0:0:2:0) 8086:2e12:1028:027f Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec90/8, BIOS @ 0x????????/131072 [ 40.810] (--) PCI: (0:0:2:1) 8086:2e13:1028:027f Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe700000/1048576, BIOS @ 0x????????/65536 [ 40.810] (II) LoadModule: "extmod" [ 40.813] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 40.815] (II) Module extmod: vendor="X.Org Foundation" [ 40.815] compiled for 1.8.2, module version = 1.0.0 [ 40.815] Module class: X.Org Server Extension [ 40.815] ABI class: X.Org Server Extension, version 3.0 [ 40.815] (II) Loading extension SELinux [ 40.815] (II) Loading extension MIT-SCREEN-SAVER [ 40.815] (II) Loading extension XFree86-VidModeExtension [ 40.815] (II) Loading extension XFree86-DGA [ 40.815] (II) Loading extension DPMS [ 40.815] (II) Loading extension XVideo [ 40.815] (II) Loading extension XVideo-MotionCompensation [ 40.815] (II) Loading extension X-Resource [ 40.815] (II) LoadModule: "dbe" [ 40.817] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 40.818] (II) Module dbe: vendor="X.Org Foundation" [ 40.818] compiled for 1.8.2, module version = 1.0.0 [ 40.818] Module class: X.Org Server Extension [ 40.818] ABI class: X.Org Server Extension, version 3.0 [ 40.818] (II) Loading extension DOUBLE-BUFFER [ 40.818] (II) LoadModule: "glx" [ 40.820] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 40.821] (II) Module glx: vendor="X.Org Foundation" [ 40.821] compiled for 1.8.2, module version = 1.0.0 [ 40.821] ABI class: X.Org Server Extension, version 3.0 [ 40.821] (==) AIGLX enabled [ 40.821] (II) Loading extension GLX [ 40.821] (II) LoadModule: "record" [ 40.823] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 40.824] (II) Module record: vendor="X.Org Foundation" [ 40.824] compiled for 1.8.2, module version = 1.13.0 [ 40.824] Module class: X.Org Server Extension [ 40.824] ABI class: X.Org Server Extension, version 3.0 [ 40.824] (II) Loading extension RECORD [ 40.824] (II) LoadModule: "dri" [ 40.827] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 40.828] (II) Module dri: vendor="X.Org Foundation" [ 40.828] compiled for 1.8.2, module version = 1.0.0 [ 40.828] ABI class: X.Org Server Extension, version 3.0 [ 40.828] (II) Loading extension XFree86-DRI [ 40.828] (II) LoadModule: "dri2" [ 40.830] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 40.831] (II) Module dri2: vendor="X.Org Foundation" [ 40.831] compiled for 1.8.2, module version = 1.2.0 [ 40.831] ABI class: X.Org Server Extension, version 3.0 [ 40.831] (II) Loading extension DRI2 [ 40.831] (II) LoadModule: "intel" [ 40.833] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 40.834] (II) Module intel: vendor="X.Org Foundation" [ 40.834] compiled for 1.8.2, module version = 2.12.0 [ 40.834] Module class: X.Org Video Driver [ 40.834] ABI class: X.Org Video Driver, version 7.0 [ 40.834] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale [ 40.835] (--) using VT number 7 [ 40.839] (II) Primary Device is: PCI 00@00:02:0 [ 40.855] (EE) intel(0): No kernel modesetting driver detected. [ 40.855] (II) UnloadModule: "intel" [ 40.855] (EE) Screen(s) found, but none have a usable configuration. [ 40.855] Fatal server error: [ 40.855] no screens found [ 40.855] Please consult the Fedora Project support at http://bodhi.fedoraproject.org/ for help. [ 40.855] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 40.855] dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.34.6-47.fc13.x86_64 (mockbuild(a)x86-18.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Aug 27 08:56:01 UTC 2010 Command line: initrd=initrd-pxe.img devfs=nomount drblthincli=off selinux=0 nomodeset BOOT_IMAGE=vmlinuz-pxe BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007bbffc00 (usable) BIOS-e820: 000000007bbffc00 - 000000007bc53c00 (ACPI NVS) BIOS-e820: 000000007bc53c00 - 000000007bc55c00 (ACPI data) BIOS-e820: 000000007bc55c00 - 000000007e000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.5 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x7bbff max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 07BE00000 mask FFFE00000 uncachable 1 base 07C000000 mask FFC000000 uncachable 2 base 07BD00000 mask FFFF00000 uncachable 3 base 080000000 mask F80000000 uncachable 4 disabled 5 disabled 6 disabled 7 base 079D00000 mask FFFF00000 uncachable x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000fe710] fe710 init_memory_mapping: 0000000000000000-000000007bbff000 0000000000 - 007ba00000 page 2M 007ba00000 - 007bbff000 page 4k kernel direct mapping tables up to 7bbff000 @ 8000-c000 RAMDISK: 7aa51000 - 7bbdf000 ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) ACPI: XSDT 00000000000fc7ef 0008C (v01 DELL B10K 00000015 ASL 00000061) ACPI: FACP 00000000000fc91f 000F4 (v03 DELL B10K 00000015 ASL 00000061) ACPI: DSDT 00000000fff1be4d 053BE (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 000000007bbffc00 00040 ACPI: SSDT 00000000fff2132a 000AA (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 00000000000fca13 00092 (v01 DELL B10K 00000015 ASL 00000061) ACPI: BOOT 00000000000fcaa5 00028 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ASF! 00000000000fcacd 00096 (v32 DELL B10K 00000015 ASL 00000061) ACPI: MCFG 00000000000fcb63 0003E (v01 DELL B10K 00000015 ASL 00000061) ACPI: HPET 00000000000fcba1 00038 (v01 DELL B10K 00000015 ASL 00000061) ACPI: TCPA 00000000000fcdfd 00032 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ____ 00000000000fce2f 00030 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SLIC 00000000000fcbd9 00176 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SSDT 000000007bbffc40 001B7 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624) ACPI: SSDT 000000007bc00049 001B7 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624) ACPI: SSDT 000000007bc00452 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007bbff000 Initmem setup node 0 0000000000000000-000000007bbff000 NODE_DATA [0000000001e0c200 - 0000000001e201ff] bootmap [0000000001e21000 - 0000000001e3077f] pages 10 (13/32 early reservations) ==> bootmem [0000000000 - 007bbff000] #0 [0001000000 - 0001e0be88] TEXT DATA BSS ==> [0001000000 - 0001e0be88] #1 [007aa51000 - 007bbdf000] RAMDISK ==> [007aa51000 - 007bbdf000] #2 [0001e0c000 - 0001e0c1f0] BRK ==> [0001e0c000 - 0001e0c1f0] #3 [00000fe720 - 0000100000] BIOS reserved ==> [00000fe720 - 0000100000] #4 [00000fe710 - 00000fe720] MP-table mpf ==> [00000fe710 - 00000fe720] #5 [000009f800 - 00000f0000] BIOS reserved ==> [000009f800 - 00000f0000] #6 [00000f029c - 00000fe710] BIOS reserved ==> [00000f029c - 00000fe710] #7 [00000f0000 - 00000f029c] MP-table mpc ==> [00000f0000 - 00000f029c] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #10 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #11 [0001e0c200 - 0001e20200] NODE_DATA ==> [0001e0c200 - 0001e20200] #12 [0001e21000 - 0001e31000] BOOTMAP ==> [0001e21000 - 0001e31000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002800000-ffff8800043fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007bbff On node 0 totalpages: 506781 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3839 pages, LIFO batch:0 DMA32 zone: 6874 pages used for memmap DMA32 zone: 495909 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 6 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 7e000000 (gap: 7e000000:62000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880002000000 s89768 r8192 d20824 u262144 pcpu-alloc: s89768 r8192 d20824 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 499748 Policy zone: DMA32 Kernel command line: initrd=initrd-pxe.img devfs=nomount drblthincli=off selinux=0 nomodeset BOOT_IMAGE=vmlinuz-pxe PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 1964784k/2027516k available (4435k kernel code, 392k absent, 62340k reserved, 7432k data, 920k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:16640 nr_irqs:472 Console: colour VGA+ 80x25 console [tty0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1994.745 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.49 BogoMIPS (lpj=1994745) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100121 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20496 entries in 81 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Celeron(R) CPU E1400 @ 2.00GHz stepping 0d Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (7979.29 BogoMIPS). sizeof(vma)=184 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=6000 bytes devtmpfs: initialized Time: 2:28:51 Date: 09/09/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F (20100121/tbutils-314) ACPI: ACPI Dock Station Driver: 1 docks/bays found PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfec00000] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfeda7fff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xfe800000-0xfebfffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0xec90-0xec97] pci 0000:00:02.1: reg 10: [mem 0xfe700000-0xfe7fffff 64bit] pci 0000:00:03.0: reg 10: [mem 0xfeda6000-0xfeda600f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10: [io 0xfe80-0xfe87] pci 0000:00:03.2: reg 14: [io 0xfe90-0xfe93] pci 0000:00:03.2: reg 18: [io 0xfea0-0xfea7] pci 0000:00:03.2: reg 1c: [io 0xfeb0-0xfeb3] pci 0000:00:03.2: reg 20: [io 0xfef0-0xfeff] pci 0000:00:03.3: reg 10: [io 0xec98-0xec9f] pci 0000:00:03.3: reg 14: [mem 0xfe6d8000-0xfe6d8fff] pci 0000:00:19.0: reg 10: [mem 0xfe6e0000-0xfe6fffff] pci 0000:00:19.0: reg 14: [mem 0xfe6d9000-0xfe6d9fff] pci 0000:00:19.0: reg 18: [io 0xecc0-0xecdf] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0xff20-0xff3f] pci 0000:00:1a.1: reg 20: [io 0xff00-0xff1f] pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f] pci 0000:00:1a.7: reg 10: [mem 0xfe6da000-0xfe6da3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xfe6dc000-0xfe6dffff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f] pci 0000:00:1d.7: reg 10: [mem 0xff980000-0xff9803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33] pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfecf] pci 0000:00:1f.2: reg 24: [io 0xeca0-0xecaf] pci 0000:00:1f.3: reg 10: [mem 0xfe6db000-0xfe6db0ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff] pci 0000:00:1f.5: reg 10: [io 0xfe40-0xfe47] pci 0000:00:1f.5: reg 14: [io 0xfe50-0xfe53] pci 0000:00:1f.5: reg 18: [io 0xfe60-0xfe67] pci 0000:00:1f.5: reg 1c: [io 0xfe70-0xfe73] pci 0000:00:1f.5: reg 20: [io 0xfed0-0xfedf] pci 0000:00:1f.5: reg 24: [io 0xecb0-0xecbf] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0xfe300000-0xfe3fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI Warning for \_SB_.PCI0.PCI2._PRT: Return Package has no elements (empty) (20100121/nspredef-456) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:03.0: no compatible bridge window for [mem 0xfeda6000-0xfeda600f 64bit] Expanded resource reserved due to conflict with PCI Bus 0000:00 reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000007bbffc00 - 000000007bffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x0800-0x085f] has been reserved system 00:01: [io 0x0c00-0x0c7f] has been reserved system 00:01: [io 0x0860-0x08ff] has been reserved pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:03.0: BAR 0: assigned [mem 0xf0400000-0xf040000f 64bit] pci 0000:00:03.0: BAR 0: set to [mem 0xf0400000-0xf040000f 64bit] (PCI address [0xf0400000-0xf040000f] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:01.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.1: bridge window [mem 0xfe300000-0xfe3fffff] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000] pci_bus 0000:04: resource 10 [mem 0x80000000-0xdfffffff] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff] pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff] pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 17976k freed Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1283999332.780:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3872 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:01.0: irq 29 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A brd: module loaded loop: module loaded ata_piix 0000:00:1f.2: version 2.13 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18 ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18 ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18 ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel(a)redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 10:827:459 rtc_cmos 00:05: setting system clock to 2010-09-09 02:28:54 UTC (1283999334) Initalizing network drop monitor service ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) ata2.00: SATA link down (SStatus 4 SControl 300) ata2.01: SATA link down (SStatus 4 SControl 300) usb 4-1: new low speed USB device using uhci_hcd and address 2 ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 4 SControl 300) ata1.00: ATA-7: ST380815AS, 4.ADA, max UDMA/133 ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32) usb 4-1: New USB device found, idVendor=0461, idProduct=4d22 usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 4-1: Product: USB Optical Mouse input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2 generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AD PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 920k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1688k freed Freeing unused kernel memory: 1948k freed usb 4-2: new low speed USB device using uhci_hcd and address 3 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 32 for MSI/MSI-X usb 4-2: New USB device found, idVendor=413c, idProduct=2105 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Dell USB Keyboard usb 4-2: Manufacturer: Dell input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 generic-usb 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-2/input0 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:ae:9f:23:2d 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 8021ff-0ff RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching e1000e 0000:00:19.0: irq 32 for MSI/MSI-X e1000e 0000:00:19.0: irq 32 for MSI/MSI-X e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None 0000:00:19.0: eth0: 10/100 speed: disabling TSO iTCO_vendor_support: vendor-support=0 microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3 microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3 microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, Peter Oruba i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH10D TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled ACPI: WMI: Mapper loaded input: Dell WMI hotkeys as /devices/virtual/input/input4 [drm] Initialized drm 1.1.0 20060810 parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 pci 0000:00:02.0: irq 33 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 34 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance vboxdrv: counter framework which can generate NMIs is active. You have to prevent vboxdrv: the usage of hardware performance counters by vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa02dc1c0 vboxdrv: fAsync=0 offMin=0x262 offMax=0x1b12 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.2.6_OSE (interface 0x00140001). -- Robert Arkiletian Eric Hamber Secondary, Vancouver, Canada

2 5

← Newer
1
...
24
25
26
27
28
29
30
...
36
Older →

Jump to page: