users March 2011

users@lists.fedoraproject.org

268 participants
270 discussions

F14 - 4 min delay on shutdown
by Genes MailLists 31 Mar '11

31 Mar '11

As of a few weeks back I started getting very slow shutdowns ... Anyone else seeing this or got some color on the problem ? here's what seems to be happening: shutdown .. network goes offline ntpd asks for an update (looks like it traps the kill -15 .. and stays up trying to clean up ) named times out .. and gets error .. wont shutdown cleanly (it has received a kill -15 which it has trapped) named waits trying to clean up - cannot clean up coz network is down. ntpd finally exits (and stops nagging named) delay of shutdown now about 4 mins .. . eventually named gets killed harder harder (and finally exits) gene/ ====================== messages ======================= Mar 31 06:55:38 lap1 ntpd[2767]: 192.5.41.41 interface 10.10.10.70 -> (null) Mar 31 06:55:43 lap1 avahi-daemon[1467]: Got SIGTERM, quitting. Mar 31 06:55:43 lap1 avahi-daemon[1467]: Leaving mDNS multicast group on interface virbr0.IPv4 with address 192.168.122.1. Mar 31 06:55:43 lap1 avahi-daemon[1467]: avahi-daemon 0.6.27 exiting. Mar 31 06:55:43 lap1 ntpd[2767]: ntpd exiting on signal 15 Mar 31 06:55:43 lap1 ntpd[1546]: ntpd 4.2.6p3-RC10(a)1.2239-o Thu Nov 25 16:18:33 UTC 2010 (1) Mar 31 06:55:43 lap1 ntpd[1549]: proto: precision = 0.839 usec Mar 31 06:55:43 lap1 ntpd[1549]: 0.0.0.0 c01d 0d kern kernel time sync enabled Mar 31 06:55:43 lap1 ntpd[1549]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123 Mar 31 06:55:43 lap1 ntpd[1549]: Listen and drop on 1 v6wildcard :: UDP 123 Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 2 lo 127.0.0.1 UDP 123 Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 3 virbr0 192.168.122.1 UDP 123 Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 4 wlan0 fe80::21f:3bff:fe27:f3c5 UDP 123 Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 5 lo ::1 UDP 123 Mar 31 06:55:43 lap1 ntpd[1549]: Listening on routing socket on fd #22 for interface updates Mar 31 06:55:44 lap1 named[1483]: error (network unreachable) resolving 'tock.usno.navy.mil/AAAA/IN': 10.10.10.63#53 Mar 31 06:55:44 lap1 named[1483]: error (network unreachable) resolving 'charon.nofs.navy.mil/A/IN': 10.10.10.63#53 ... (loads of similar errors) Mar 31 06:55:49 lap1 named[1483]: error (network unreachable) resolving 'i.root-servers.net/AAAA/IN': 2001:dc3::35#53 Mar 31 06:55:49 lap1 named[1483]: error (network unreachable) resolving 'l.root-servers.net/AAAA/IN': 2001:500:1::803f:235#53 Mar 31 06:55:49 lap1 ntpd[1549]: ntpd exiting on signal 15 Mar 31 06:55:49 lap1 named[1483]: received control channel command 'stop' Mar 31 06:55:49 lap1 named[1483]: shutting down: flushing changes Mar 31 06:55:49 lap1 named[1483]: stopping command channel on 127.0.0.1#953 Mar 31 06:55:49 lap1 named[1483]: stopping command channel on ::1#953 Mar 31 06:55:49 lap1 named[1483]: no longer listening on 127.0.0.1#53 Mar 31 06:56:13 lap1 dnsmasq[1991]: no servers found in /etc/resolv.conf, will retry ==================================================================

3 11

R: Re: R: Re: R: Re: Plotter Hp Designjet T770
by antonio montagnani 31 Mar '11

31 Mar '11

>----Messaggio originale---- >Da: hobbes1069(a)gmail.com >Data: 31-mar-2011 19.57 >A: "Community support for Fedora users"<users(a)lists.fedoraproject.org> >Ogg: Re: R: Re: R: Re: Plotter Hp Designjet T770 > >On Thu, Mar 31, 2011 at 5: 38 AM, Mogens Kjaer <mk(a)lemo.dk> wrote: >> On 03/31/2011 12:14 PM, antonio. montagnani(a)alice.it wrote: >> ... >>>> From the website of HP: >>> >>> http://hplipopensource.com/hplip-web/release_notes.html>>> That plotter should be >>> natively supported by latest Hplip. >>> >>> What are we missing?? >> >> You are missing the "ps". >> >> The T770ps printer is a T770 printer with an additional postscript option. > >Assuming that system-config-printer is automagically finding the >postscript driver... > >I just looked through the available printers and it doesn't appear to >have a non-ps driver for that particular model. You might try using >one of the other non-ps drivers and see if it works well enough for >your needs. > >Richard >-- Bug 692432 - Plotter HP Deskjet T770 is not printing I filed a bug as I think that it should work out of the box, as it is included in hplip, as also per HP note on latest hplip. It is not urgent as plotter is a network plotter in an office where I am working as consultant (but not an IT consultant) Rgds Anonio

1 0

R: Re: R: Re: Plotter Hp Designjet T770
by antonio montagnani 31 Mar '11

31 Mar '11

>----Messaggio originale---- >Da: twaugh(a)redhat.com >Data: 31-mar-2011 11.44 >A: "antonio.montagnani(a)alice.it"<antonio.montagnani(a)alice.it>, "Community support for Fedora users"<users(a)lists.fedoraproject.org> >Ogg: Re: R: Re: Plotter Hp Designjet T770 > >On Thu, 2011-03-31 at 09:08 +0200, antonio. montagnani(a)alice.it wrote: >> Fedora finds the following driver: >> HP Designjet T770ps 44in > >That's HP own PostScript-based driver. However, from the look of the >specifications it actually speaks HP-GL/2 natively but not PostScript. >Perhaps there is an optional PostScript module for that printer? > >Tim. >*/ >From the website of HP: http://hplipopensource.com/hplip-web/release_notes.html That plotter should be natively supported by latest Hplip. What are we missing?? Antonio

4 3

My DVD reader doesn't always load....
by DB 31 Mar '11

31 Mar '11

Hi all, I appear to have a problem with my DVD reader (Gigabyte Technology 16x16 DVD rw/r). When I put a dvd in the tray, sometimes the DVD title comes up in the "recent device" window, sometimes nothing. When "nothing" comes up, sometimes the tray is locked & I can't get the disc out again. I have a pair of DVDs, produced in Germany, one plays, the other doesn't..... If the disc loads, sometimes I can play it with Kaffeine, sometimes I have to use Bangarang, because Kaffeine doesn't see any start point on the disc..... Then one time, Bangarang plays one disc; when I try to play a second one it crashes.... Anyone got any suggestions on how to try and debug this little lot????? As ever, many thanks for any help you can give me!!!! Cheers Dave uname -ar Linux Fedora-Blue 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux KDE, MSI880GM-e41 with Phenom II X6 1075T

2 1

Convert to OGV.
by Lázaro Morales 31 Mar '11

31 Mar '11

Hello, Can someone recommend me an application for convert any video file (.avi, .mpeg, ...) to OGG or OGV video file? and, Is this application available in the Fedora Official Repo? Thanks in advance. Best regard, Lázaro. Este mensaje de correo electrónico ha sido procesado por el servidor de Frioclima

3 5

Audio: Mic not working
by Sergio Belkin 31 Mar '11

31 Mar '11

I have a problem: mic is not working. Sound output works fine, but when I use mic, opening pavucontrol with the volum high, I see that mic receives audio but there is no audible sound. I've checked the volume with alsamixer and set high all volume controls and nothing at all! Mi sound card is: lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Alsa version are: rpm -qa | grep ^alsa alsa-tools-firmware-1.0.24.1-1.fc14.i686 alsa-plugins-pulseaudio-1.0.22-1.fc13.i686 alsa-utils-1.0.23-3.fc14.i686 alsa-lib-devel-1.0.24-1.fc14.i686 alsa-lib-1.0.24-1.fc14.i686 alsa-firmware-1.0.24.1-1.fc14.noarch More info: gconftool-2 --recursive-list /system/gstreamer/0.10/default musicaudiosink_description = Default videosink = autovideosink visualization = autoaudiosink audiosink = autoaudiosink musicaudiosink = autoaudiosink chataudiosink_description = Default audiosrc_description = Default audiosink_description = Default chataudiosink = autoaudiosink audiosrc = alsasrc videosrc = v4l2src I use Fedora 14 on a netbook ASPIRE one D250 Please could you tell me what I'm missing? Thanks in advance! -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com LPIC-2 Certified - http://www.lpi.org

1 0

Need help with rpmbuild
by Steve Blackwell 31 Mar '11

31 Mar '11

Specifically the install section. I'm not understanding how the %install section works with the %files section. I hope this is not considered OT. Let's say I want my rpm to install the file "hello" in /tmp on a target system. The %prep and %build sections work OK and create my hello file in BUILD/hello-1. (Why BUILD/hello-1 and not just BUILD I don't know but for now it doesn't matter.) The install and files sections of my spec file look like this: (Obviously %{name} is defined as hello) %install cp %{name} $RPM_BUILD_ROOT/ %files %defattr(-,root,root,-) /tmp/hello %BuildRoot is defined (by default) to be %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) What's with the XXXXX? The cp works as expected but then an error occurs saying: Extracting debug info ... blah ... blah... ... error: File not found: /home/steve/rpmbuild/BUILDROOT/hello-1-1.fc12.i386/tmp/hello I feel like I'm missing the big picture here. I'd appreciate any direct help or pointers to some good explanation. I've read a bunch of docs but they have not helped in this case. Thanks, Steve -- Changing lives one card at a time http://www.send1cardnow.com

9 12

re: phpPgAdmin on Fedora 13
by Alan Gagne 31 Mar '11

31 Mar '11

A quick search on google turned up a number of hits for this. The first couple are for Fedora 12 and 14 but both are the almost same directions. One of these like it should work. http://ciupu.elektroda.eu/?p=42 or http://mfosn.wordpress.com/tag/phppgadmin/

1 0

R: Re: Plotter Hp Designjet T770
by antonio montagnani 31 Mar '11

31 Mar '11

>----Messaggio originale---- >Da: joe(a)zeff.us >Data: 31-mar-2011 8.11 >A: "Community support for Fedora users"<users(a)lists.fedoraproject.org> >Ogg: Re: Plotter Hp Designjet T770 > >On 03/30/2011 10:08 PM, antonio montagnani wrote: >> if fails to print the test page from Fedora printer window: not sure, I >> have to check later, it says unsupported format or alike. > >OK. we presume then that the printer's known to be working and that >hardware problems aren't an issue. If nothing else, we've eliminated >one possibility. >-- >users mailing list >users(a)lists.fedoraproject.org >To unsubscribe or change subscription options: >https://admin.fedoraproject.org/mailman/listinfo/users>Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > the plotter has no hardware issues, as it has been printing for years, and I have no network issues as I can print on other networked printers When I try to print I read on the plotter screen: unable to manage unknow file format... Fedora finds the following driver: HP Designjet T770ps 44in I was not able to find the plotter in the openprinting database I am confused :-) How to debug it??? Antonio

2 1

Plotter Hp Designjet T770
by antonio montagnani 31 Mar '11

31 Mar '11

Has anybody succeeded to print on a networked printer (Designjet T770), that is easily recognized on the network, but it fails to print also the test page?? -- Antonio M Skype: amontag52 Linux Fedora F14 (Laughlin) on Acer 5720 http://lugsaronno.altervista.org www.campingmonterosa.com www.studiodacolpaloschi.it

2 3

← Newer
1
2
3
4
5
6
7
8
9
...
27
Older →

Jump to page: