users September 2011

users@lists.fedoraproject.org

279 participants
285 discussions

by Timothy Murphy

Has anyone succeeded in installing CentOS-6.0 by PXEboot. If so, would you say how you did it, please. I tried, but gave up in the end and used a USB stick instead. But I'd be very interested to know how to do it, for the future. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

12 years, 8 months

6
8
0 / 0

Wireless available, but no APs found when scanning.

by linux guy

F15, fully up to date, KDE session. Kstart->Settings->System Settings-> Network Settings -> Wireless -> Add -> Scan doesn't find any APs available. All my other F15 computers show several. Manually, it finds some. See below. It also finds them when running from the F15 Live ISO. Details $ uname -a Linux dragon.localdomain 2.6.40.4-5.fc15.i686 #1 SMP Tue Aug 30 14:54:41 UTC 2011 i686 i686 i386 GNU/Linux $ yum list kdebase kdebase.i686 6:4.6.5-1.fc15 $ yum list NetworkManager NetworkManager.i686 1:0.9.0-1.fc15 $ lspci | grep Wire 02:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61) $ lsmod | grep iwl iwl4965 150420 0 iwl_legacy 113106 1 iwl4965 mac80211 211975 2 iwl4965,iwl_legacy cfg80211 126267 3 iwl4965,iwl_legacy,mac80211 Let me know if you need anything else. LG List of manual scan. # ifconfig wlan0 up # iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:13:10:F0:B9:15 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=35/70 Signal level=-75 dBm Encryption key:off ESSID:"linksys123213" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000005458a0c1104 Extra: Last beacon: 1559ms ago IE: Unknown: 000D6C696E6B737973313233323133 IE: Unknown: 010882848B962430486C IE: Unknown: 030106 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: DD06001018010100 Cell 02 - Address: 58:6D:8F:27:D9:E6 Channel:149 Frequency:5.745 GHz (Channel 149) Quality=39/70 Signal level=-71 dBm Encryption key:on ESSID:"E4200" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 503ms ago IE: Unknown: 00054534323030 IE: Unknown: 01088C129824B048606C IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: 2D1A73081BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16950D0000000000000000000000000000000000000000 IE: Unknown: DD7F0050F204104A00011010440001021041000100103B00010310470010081862432749CFF89FEA856B3EFAFCCC10210005436973636F1023000D4C696E6B7379732045343230301024000776312E302E30311042000234321054000800060050F20400011011000D4C696E6B737973204534323030100800020084103C000103 IE: Unknown: DD090010180200F03C0000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 Cell 03 - Address: 58:6D:8F:27:D9:E5 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=49/70 Signal level=-61 dBm Encryption key:on ESSID:"E4200" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 1560ms ago IE: Unknown: 00054534323030 IE: Unknown: 010882848B962430486C IE: Unknown: 030106 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AF2181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16060D1100000000000000000000000000000000000000 IE: Unknown: 4A0E14000A002C01C800140005001900 IE: Unknown: 7F0101 IE: Unknown: DD7F0050F204104A00011010440001021041000100103B00010310470010081862432749CFF89FEA856B3EFAFCCC10210005436973636F1023000D4C696E6B7379732045343230301024000776312E302E30311042000234321054000800060050F20400011011000D4C696E6B737973204534323030100800020084103C000103 IE: Unknown: DD090010180200F02C0000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00

12 years, 8 months

2
1
0 / 0

Where is the computer network name set and stored ?

by linux guy

When one installs F15 (KDE) via the Live ISO, the second part of the install process asks the user to set the computer network name, ie localhost@localdomain. When one changes localhost to another name, it shows up in the DHCP clients table of my Linksys E4200 router page. I like that. Where is this name stored ? How does one change what its set to ? $ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 Thanks

12 years, 8 months

8
12
0 / 0

How to setup IPSEC client?

by Eric B.

Hi, I'm trying to setup FC14 with an IPSEC client to connect to my VPN at work. I have been given a PEM/KEY file for authentication (and a p12 if needed) but I can't seem to figure out how to configure IPSEC. I've been trying to read up on it as much as possible, but I just can't get a good grasp on how to do this. I have all the settings I need, but I just can't figure out how/where to configure them. The Network Manager tool doesn't have anything that supports PEM/Key certificates, and the same goes for the Network Configuration gui as well. Can anyone please point me in the right direction how to best set this up? Thanks! Eric

12 years, 8 months

2
1
0 / 0

jackaudiosink and pulseaudio on F15

by Daniele Guerrieri

Hi, to route pulseaudio stream from media player to jack (for example, redirect audio output of rhythmbox to rackarrack) i used jackaudiosink; now it seems to me that jackaudiosink isn't included in gstreamer-plugins in F15. More in depth, in jack's faq (http://jackaudio.org/gstreamer_via_jack) i read that i have to set gconf value of /system/gstreamer/0.10/audio/default/musicaudiosink and /system/gstreamer/0.10/audio/default/audiosink to this value: jackaudiosink buffer-time=2000000 : how can this be done in GNOME 3's dconf? I found gstreamer-properties in gnome-media-apps, if jackaudiosink were available (compiling it) should it work?. Otherwise, does anyone know how to route pulseaudio to jack with F15? if it's not possible, this feature will be implemented in F16? Thanks, Daniele

12 years, 8 months

2
3
0 / 0

FYI: Systemd Gets Booted From openSUSE Tumbleweed

by JB

Systemd Gets Booted From openSUSE Tumbleweed http://www.phoronix.com/scan.php?page=news_item&px=OTkyNg JB

12 years, 8 months

3
2
0 / 0

Setting up graphical boot from scratch

by Christopher Svanefalk

Dear all, I just did a clean-slate install of F14 (less than 200 packages), and would like to play around with setting the system up manually. However, I am not entirely sure what scripts to modify in order to get the system to automatically start the X server and load a loginscreen. Could I just have some pointers? No extensive info is needed. Thanks in advance! Chris

12 years, 8 months

3
3
0 / 0

Need help with a feature request

by Joe Zeff

Back in August, I filed a feature request on Gnucash, pointing out that it's not possible to schedule a transaction for the third Wednesday of every month, or anything similar: https://bugzilla.gnome.org/show_bug.cgi?id=656316 I've just gotten the first response to it, and that's a comment that a previous request for an enhancement of this nature was closed as WONTFIX. And, the request is still marked as UNCONFIRMED. If any of you use Gnucash and would find such a feature useful, please consider adding comments in support of it. It's not a major bug or anything, but I do think that there's a large number of Gnucash users out there who'd appreciate having this and the more people asking for it, the more likely it is that the developers will decide to look into it.

12 years, 8 months

5
8
0 / 0

Update error (Test Transaction): glibc

by Christoph A.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi, when updating I get the following error message: Test Transaction Errors: file /usr/share/doc/glibc-2.13/NEWS from install of glibc-2.13-2.i686 conflicts with file from package glibc-2.13-1.x86_64 rpm -qa glibc glibc-2.13-1.i686 glibc-2.13-1.x86_64 glibc-2.13-2.x86_64 How can this be fixed? thanks, Christoph -----BEGIN PGP SIGNATURE----- iEYEAREKAAYFAk57K5sACgkQrq+riTAIEg1gnQCfaLmQwALV948SZe0EGd23YOBm UzsAn3AWoCvAxAkhNUznbCIs04CEd59p =VHhg -----END PGP SIGNATURE-----

12 years, 8 months

3
6
0 / 0

Using diskless clients in Fedora 14

by Miner, Jonathan W (US SSA)

It's been a while since I've done anything with diskless clients. I've read and followed the steps Chapter 18 of the "Storage Admin Guide". My cluster (server + 2 nodes) is working, but I have some questions: 1) The docs make it look like all the clients share the same filesystem and mount it read-write. Wouldn't this cause problems? I recall in the older versions there were separate directories for each client. 2) I've tried looking for a concrete examples of setting up a small diskless cluster using Fedora 14. Has anyone done it? - Jon

12 years, 8 months

2
2
0 / 0

← Newer
1
...
8
9
10
11
12
13
14
...
29
Older →

Jump to page: