users May 2013

users@lists.fedoraproject.org

191 participants
225 discussions

no audio with HDMI
by Mike Wright 11 May '13

11 May '13

Hi all, Need help from the audio gurus. f18, up to date. Anybody using their HDMI out for a TV? I've connected the HDMI output from a PC to an HDTV's HDMI port. The TV reports HDMI no audio. On the PC, PulseAudio Volume Control->Output Devices shows: HDA ATI HDMI Digital Stereo (HDMI) Port: HDMI/Display Port followed by check boxes for various codecs. PCM is checked but grayed-out/disabled (which is the one I think I need). Below that the Front-Left/Right volume control indicators *do* respond to the keyboard's volume keys and below that is a graphical sound indicator that matches the expected output. All of that shows that the audio is making it into the system but is not making its way out. A hunch says PCM issue, but I really haven't a clue. It would be very sweet to have this resolved. Thanks, Mike Wright

4 4

Re: Restricting browsers to only listed websites
by davidschaak1＠mobilicity.blackberry.com 10 May '13

10 May '13

Apologies for top posting. Thanks for the suggestion and I would do that if it was the gateway machine. My etc/resolve.conf file has to references to rogers namesaver in it. If I rem out those 2 lines I don't think that machine will go anywhere. I may be wrong on that. Dave ------Original Message------ From: Terry Polzin To: davidschaak1(a)mobilicity.blackberry.com To: Community support for Fedora users Subject: Re: Restricting browsers to only listed websites Sent: May 9, 2013 10:31 On Thu, 2013-05-09 at 14:11 +0000, davidschaak1(a)mobilicity.blackberry.com wrote: > Is there a way to allow a machine on the network to only access a small list of websites? > > I have a fedora 17 machine that is hooked to a tv that I only want to access a couple of sites for movies. This is accessible to everyone and is only to be used as stated. > > I need the network up. > > A Cisco router is between the machine and the net that I do not want to reset. (Unauthorized to do so). > > Any help on this would be appreciated. > > Dave > Sent from my BlackBerry® smartphone powered by Mobilicity Use squid as a proxy maybe? Sent from my BlackBerry® smartphone powered by Mobilicity

5 8

Re: F18 on Raspberry Pi
by Ted Sluis 10 May '13

10 May '13

On May 9, 2013, at 1:17 AM, MLists <mlists(a)starmania.net> wrote: > Just wondering if anyone has any hints/tips on getting Fedora 18 > up and running on a Raspberry Pi (specifically the latest 2.0 > model B 512M version). I’ve tried about 4 different tutorials > scattered around the net to copy the dist onto the SD card, about > a half dozen different SD cards. Also tried a couple of > preinstalled ones from eBay just in case I was doing something > stupid. Also tried about 3 different Raspberry Pi’s. In all > cases I get nothing… apply power and just get a black screen. > Have tried a couple of other distros and they all seem to boot > up right away the first time. I’d prefer to be using Fedora > since I’m far more familiar with it, but I’m at wit’s end trying > to get it to work. > > Cheers, > >>>>> Mike <<<<< Anything could be the problem Mike, but maybe you suffer from this issue: I got two raspberry's, both model B 512 version. One raspberry was delivered in October 2012 and the other one in April 2013. The old model boots well with rpfr18 final image. The new model did not ;-( Only the red power LED stays ON and the green (SD card) LED only flashes very briefly. Then nothing happened.... What seems to be the problem: New raspberry pi hardware comes with a new memory chip. Unfortunately the boot-loader that is used in the raspberry pi fedora (rpfr) 18 final is out dated and does not support the new memory chip. The good news is: a new bootloader is available! All Linux brands for raspberry use the same type of boot-loader You need to copy the three files boot-loader files -bootcode.bin, fixup.dat and start.elf- from an other raspberry distro to your /boot file-system For example, I use the boot-loader files from the latest OpenElec image. You can download it here: http://openelec.tv/get-openelec/download/finish/10-raspberry-pi-builds/76-o… There are several posts in the raspberrypi.org forum about this issue. Check these posts for more info: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=51&t=42511 http://www.raspberrypi.org/phpBB3/viewtopic.php?p=329434#p329434 http://www.raspberrypi.org/phpBB3/viewtopic.php?p=329416#p329416 http://www.raspberrypi.org/phpBB3/viewtopic.php?p=328816#p328816 I hope this will help you. (Btw: This is the first time I post something in this mailing list. I hope I followed the mailing list guidelines in the right way. If not, please let me know...) Ted Sluis

2 1

fedora18 and ipods/iphones
by profiles 10 May '13

10 May '13

Hello, I am new to linux and this mailing list. After years of frustration and discomfort with Windows I finally switched over to linux. Hallelujah. Unfortunately I own some apple hardware. I have an iphone3 and an ipod touch4g. I am not fond of either, but until I do the research and have the cash to switch over to an Android I will be relying on these devices for communication. I have an extensive contacts list on my iphone and I'd like to import it into my evolution email client. Does anyone have a strategy on how to access data on these mac devices? Ideally I'd like to have my laptop read them as mass storage devices. I have read a little about the evasi0n jailbreak that is available. Has anyone jailbroken one of the divices listed above? Did doing so make the divice more compatible with linux (specifically f18). I am running kernel 3.8.11-200.fc18.x86_64 Thanks for reading

6 6

find / grep to list files with php's short_open_tag
by Reindl Harald 10 May '13

10 May '13

am i stupid or grep? :-) find /data/www/ -type f -name \*.php -exec grep -l -i -n -F "<?" '{}' \; lists any file which contains "<?" under the path /data/www/ find /data/www/ -type f -name \*.php -exec grep -l -i -n -F "<?\n" '{}' \; is expected to find any file with "<?" followed directly by a linebreak but that does not work and if someone finds google empty it was me :-(

5 7

fedora 18 gnome-shell core dumps before live system starts
by Bram Mertens 10 May '13

10 May '13

Hi, I wanted to give fedora 18 a try so I created a new virtual machine in virtualbox (host is Windows 7 enterprise 64bit). I'm using the 32bit live CD but no matter what options I try after the fedora 18 progress bar I get a black screen followed by the blue background for a short while and then a window displaying "oh no something has gone wrong please contact your system administrator". I've checked the media (troubleshoot check media and start fedora 18) and it reported no errors. I tried adding xdriver=vesa and troubleshooting > start with basic vide driver but I get the same result. I opened one of the virtual terminals and I'm able to log on as root so some system is running, but I'm unable to tell if this is the live system or some anaconda or other installer shell. /var/log/messages contains reports that gnome-shell core dumped and an abrt trace has been created. The only report I found that resembles what I see is https://bugzilla.redhat.com/show_bug.cgi?id=919669. In the abrt report I also see "Process /usr/bin/gnome-shell was killed by signal 4 (SIGILL)" in the reason file. Is there any other boot option I can try? Is there a way to recover from the gnome-shell crash? Perhaps force fallback mode? Thanks in advance. Bram Mertens

3 4

Cannot mount MMC (don't see the partition with fdisk -l)
by Andy Johnson 10 May '13

10 May '13

Hello, I am trying to mount an SD/MMC card on Fedora x86_64 and I cannot see it in fdisk -l. The SD/MMC is ENE Flash (UB623X) These kernel modules are loaded before inserting the SD/MMC card: mmc_block, mmc_core, usb_storage,sdhci_pci, sdhci loaded In the kernel log, what I see after inserting it is : May 8 07:18:30 localhost kernel: [ 2565.640033] usb 1-6: new high-speed USB device number 7 using ehci-pci May 8 07:18:30 localhost kernel: [ 2565.754927] usb 1-6: New USB device found, idVendor=0cf2, idProduct=6230 May 8 07:18:30 localhost kernel: [ 2565.754935] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=4 May 8 07:18:30 localhost kernel: [ 2565.754939] usb 1-6: Product: UB623X May 8 07:18:30 localhost kernel: [ 2565.754943] usb 1-6: Manufacturer: ENE Flash May 8 07:18:30 localhost kernel: [ 2565.754947] usb 1-6: SerialNumber: 606569746801 May 8 07:18:30 localhost kernel: [ 2565.756649] scsi5 : usb-storage 1-6:1.0 May 8 07:18:30 localhost mtp-probe: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6" May 8 07:18:30 localhost mtp-probe: bus: 1, device: 7 was not an MTP device May 8 07:18:31 localhost kernel: [ 2566.758702] scsi 5:0:0:0: Direct-Access USB2.0 CardReader CF 0100 PQ: 0 ANSI: 0 May 8 07:18:31 localhost kernel: [ 2566.759235] scsi 5:0:0:1: Direct-Access USB2.0 CardReader SM XD 0100 PQ: 0 ANSI: 0 May 8 07:18:31 localhost kernel: [ 2566.759691] scsi 5:0:0:2: Direct-Access USB2.0 CardReader MS 0100 PQ: 0 ANSI: 0 May 8 07:18:31 localhost kernel: [ 2566.760183] scsi 5:0:0:3: Direct-Access USB2.0 CardReader SD 0100 PQ: 0 ANSI: 0 May 8 07:18:31 localhost kernel: [ 2566.761366] sd 5:0:0:0: Attached scsi generic sg3 type 0 May 8 07:18:31 localhost kernel: [ 2566.763333] sd 5:0:0:1: Attached scsi generic sg4 type 0 May 8 07:18:31 localhost kernel: [ 2566.763631] sd 5:0:0:0: [sdc] Attached SCSI removable disk May 8 07:18:31 localhost kernel: [ 2566.763695] sd 5:0:0:2: Attached scsi generic sg5 type 0 May 8 07:18:31 localhost kernel: [ 2566.764047] sd 5:0:0:3: Attached scsi generic sg6 type 0 May 8 07:18:31 localhost kernel: [ 2566.767690] sd 5:0:0:2: [sde] Attached SCSI removable disk May 8 07:18:31 localhost kernel: [ 2566.768693] sd 5:0:0:1: [sdd] Attached SCSI removable disk May 8 07:18:31 localhost kernel: [ 2566.775193] sd 5:0:0:3: [sdf] Attached SCSI removable disk lsusb shows it: lsusb ... Bus 001 Device 007: ID 0cf2:6230 ENE Technology, Inc. ... typing: lspci gives: 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10) what is strange for me is that I do not see it card reader in lspci. \ I expected a line like "MMC Host Controller..." any ideas? Andy

4 7

UEFI Notebook
by Martín Marqués 09 May '13

09 May '13

Hi all, I have a new Acer Aspire One with Windows 8. The question that came up was when I realized that it had UEFI instead of BIOS (which I read, is what we're going to have to deal with from now on). What precautions should I take with UEFI? Disable the Secure Boot? (Read that I have to disable it to get grub to work)? Just now I'm getting on top of this technology, but maybe some of you guys had experience with this and can give me some hints! -- Martín Marqués select 'martin.marques' || '@' || 'gmail.com' DBA, Programador, Administrador

8 12

How to mount a external USB drive automatically
by Anthony 09 May '13

09 May '13

I have an external USB drive that is always connected to my computer. When I log in, it shows up on my desktop (unmounted) and all I have to do is click on it to mount it. It mounts to /run/media/anthony/Storage But I want to have it mount automatically for both me (the system admin) and any other users that login to their accounts. I'll then change individual folder permissions for access control. How can I make it mount automatically since it's already showing in its unmounted state on my desktop? Thanks, Anthony

7 11

Fedora xfs can't open files
by Shelby, James 09 May '13

09 May '13

Greetings everyone, I'm hoping someone else may have run in to this issue already. I have a Fedora system using xfs as the file system. About two months ago we had a power outage and the system seemed to come up fine (not sure if this could be related but making it noted). Two days ago it was noticed that some files couldn't be opened or read in one specific tree. There are other directories on this file system that work fine but files within several directories are not able to be read, they can be renamed and have the attributes changed just fine but I can't copy, md5sum or anything on the files. I took the system down, and did a xfs_check on the file systems and it found no problems. It seems like they are in a locked state but not able to access them in any way. Has any one seen this problem before or can give me any ideas on how to troubleshoot? I did try mapfile which says it doesn't have a valid identifier for the file. Thanks in advance James

2 5

← Newer
1
...
14
15
16
17
18
19
20
...
23
Older →

Jump to page: