users June 2013

users@lists.fedoraproject.org

149 participants
161 discussions

san disk not seen by Linux 2.6.35.6-45.fc14.i686
by Randolph Jones 22 Jun '13

22 Jun '13

I have a 16gb sandisk with 2 pictures on it. shotwell can see the pictures when I connect my camera to usb port. Linux cant see the disk when plugged in to a usb adapter. Linux can see other sandisks in this adapter. The partition table is corrupted (I think) Linux sees the adapter but not the 16gb disk this is output of dmesg when I plug the disk into linux [ 2866.397099] usb 6-1: USB disconnect, address 5 [ 2869.880085] usb 6-1: new full speed USB device using ohci_hcd and address 6 [ 2870.051170] usb 6-1: New USB device found, idVendor=0a48, idProduct=5007 [ 2870.051181] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2870.051188] usb 6-1: Product: Secure Digital Keychain [ 2870.051194] usb 6-1: Manufacturer: mediaGear [ 2870.054850] scsi11 : usb-storage 6-1:1.0 [ 2871.066286] scsi 11:0:0:0: Direct-Access MG SD-Key 1.00 PQ: 0 ANSI: 0 [ 2871.070283] sd 11:0:0:0: Attached scsi generic sg6 type 0 [ 2902.139078] usb 6-1: reset full speed USB device using ohci_hcd and address 6 [ 2912.414084] usb 6-1: reset full speed USB device using ohci_hcd and address 6 [ 2928.692104] usb 6-1: reset full speed USB device using ohci_hcd and address 6 [ 2928.968086] usb 6-1: reset full speed USB device using ohci_hcd and address 6 TIA rfjones

2 1

F18 prelink or dracut?
by Frank Murphy 22 Jun '13

22 Jun '13

Anyone similar problems now or previous? Installed a kernel with yumex, didn't boot, so reinstalled with yum Reinstall 2 Packages Total size: 170 M Installed size: 170 M Is this ok [y/d/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction Installing : kernel-doc-3.9.7-200.fc18.noarch 1/2 Installing : kernel-3.9.7-200.fc18.x86_64 2/2 /usr/lib/dracut/dracut-functions.sh: line 68: ldd: command not found /usr/sbin/prelink: /usr/bin/readlink: Dependency tracing failed /usr/sbin/prelink: /usr/bin/cp: Dependency tracing failed /usr/sbin/prelink: /usr/bin/kbd_mode: Dependency tracing failed <snipped /> yum provides */ldd Loaded plugins: lan, langpacks, priorities <snipped> glibc-common-2.16-31.fc18.x86_64 : Common binaries and locale data for glibc Repo : installed Matched from: Filename : /usr/bin/ldd </snipped> -- Regards, Frank "When in doubt PANIC!" I check for new mail app. 20min www.frankly3d.com

1 0

mcelog.service
by lee 21 Jun '13

21 Jun '13

Hi, is the mcelog.service of any use to me? There's a package mcelog-1.0-0.6.6e4e2a00.fc18.x86_64 installed and listed as a leave by package-cleanup, the service is running; /var/log/mce doesn't exist (which is probably good). In which way would it help me to log such errors if there were any? -- Fedora 18

7 33

pnmixer and pulseaudio
by Corinna Vinschen 21 Jun '13

21 Jun '13

Hi, I'm trying to run pnmixer in my xfce systray because it's nicer than the default xfce4-mixer, and because I can run pavucontrol from there. But I have a strange problem. Supposedly pnmixer can deal with ALSA and PulseAudio(*). ALSA appears to work, but there's no way to control PulseAudio channels for some reason. For the main volume control I have only the choice between my two ALSA devices, an USB headset and the internal HDA ATI SB card. While controlling the volume of the headset works fine, when choosing any of the channels of the SB card, changing the volume has no effect at all (works in pavucontrol, though). Neither has the mute button. Yes, I tried "Reload ALSA" multiple times with no effect at all. In contrast, if I start xfce4-mixer, I have not only the choice between the USB headset, and the HDA ATI SB also device, but I have additional choices from PulseAudio. If I choose HDA ATI SB (Alsa Device), xfce4-mixer can't change the volume of the device either. if I choose the matching PulseAudio device "Playback: Built-in Audio Digital Stereo (IEC958)", the xfce4-mixer volume control works. As a sidenote, when changing the device in pnmixer's preference dialog, after pressing the OK button an error dialog pops up, telling me "Mixer detach error: No such file or directory". I have no idea what it's trying to tell me. Does anybody know how I can get pnmixer to recogize the PulseAudio channels and use them for its volume control? Or if I'm doing something wrong, can anybody tell me what that is? Thanks, Corinna (*) https://github.com/nicklan/pnmixer/wiki/

3 9

rc.local for shutdown?
by Tom Horsley 21 Jun '13

21 Jun '13

You can put random stuff to do at boot in /etc/rc.d/rc.local and it will get run last thing at boot time. Just out of curiosity, is there an equivalent file you can get to run just before everything else at reboot or shutdown time?

2 1

blkid, multipath and blacklist issue
by Will Yonker 21 Jun '13

21 Jun '13

Hi, I have a Fedora 18 system that I just setup multipath on.Â The problem is, blkid no longer reports UUIDs on any disk that I have on the multipath.conf blacklist.Â Is there a way around this?Â It presents a problem because I mount quite a few volumes via their UUID because they are iSCSI and get different device IDs frequently. uname -a Linux nix03 3.9.5-201.fc18.x86_64 #1 SMP Tue Jun 11 19:40:51 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux rpm -qa|grep multip device-mapper-multipath-0.4.9-36.fc18.x86_64 device-mapper-multipath-libs-0.4.9-36.fc18.x86_64 As always, thank you for your help! --- Will Y. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

F18 unable to read sdcard (was fine with F17)
by Ranjan Maitra 21 Jun '13

21 Jun '13

Hi, I am unable to read a SanDisk microSD card via its adapter, which read fine with F17 and before on the same two 4-year-old notebooks (Dell Latitude E6400 and E5400). I searched some but most of the queries were with newer machines. Some talk about success (and failure) with installing kmod-staging. But these appear to be mentioned in the context of newer machines. (In any case, I installed it (sudo yum install kmod-staging) but got no relief. lspci and lsusb do not have any trace of the SD card. Any suggestions? Happy to provide more information, of course. Many thanks and best wishes, Ranjan -- Important Notice: This mailbox is ignored: e-mails are set to be deleted on receipt. For those needing to send personal or professional e-mail, please use appropriate addresses. ____________________________________________________________ GET FREE SMILEYS FOR YOUR IM & EMAIL - Learn more at http://www.inbox.com/smileys Works with AIM®, MSN® Messenger, Yahoo!® Messenger, ICQ®, Google Talk™ and most webmails

1 0

Question about directory ownership
by Anthony 20 Jun '13

20 Jun '13

Hello Everyone, How do I add myself as co-owner of a directory? I set up a new apache server and need to transfer files to /var/www/html. The problem is, of course, I've denied root login but don't have sufficient privs to login and transfer files under my username. How can I fix this? Thanks, Anthony -- Anthony Papillion Phone: 1.918.533.9699 SIP: sip:cajuntechie@iptel.org iNum: +883510008360912 XMPP: cypherpunk38(a)jit.si www.cajuntechie.org

7 8

Anyone using Z87 chipset and Haswell cpu?
by Tom Horsley 20 Jun '13

20 Jun '13

My motherboard just died and I figured I'd upgrade to latest and greatest, but it occurs to me that the Z87 is really new, so I just wondered if linux kernels know about it yet?

3 2

error: Failed dependencies: (Fedora 14)
by Thomas Tobian 20 Jun '13

20 Jun '13

Hallo guys, I need one more dependency but I do not know how to figure out: error: Failed dependencies: *freetype = 2.4.2-3.fc14* is needed by freetype-devel-2.4.2-3.fc14.x86_64 how could I get this file, in order to complete my installation for freetype-devel-2.4.2-3.fc14.x86_64 if I set using yum i got this error: Error: Package: freetype-devel-2.4.2-3.fc14.x86_64 (fedora) Requires: freetype = 2.4.2-3.fc14 Installed: freetype-2.4.2-4.fc14.i686 (@kambing-updates) freetype = 2.4.2-4.fc14 Available: freetype-2.4.2-3.fc14.i686 (fedora) freetype = 2.4.2-3.fc14 What should I do, how can I disable the "kambing-updates" repository? I really appreciate for your help. thank you.

8 10

← Newer
1
...
5
6
7
8
9
10
11
...
17
Older →

Jump to page: