users September 2013

users@lists.fedoraproject.org

185 participants
243 discussions

Fedora 19 tricky install
by Robert Dady 30 Sep '13

30 Sep '13

Hi all! I have the following configuration. Win7 UEFI install Fedora 19 UEFI install Disk has GPT and Linux has following partitions: /, /boot, /boot/efi, swap, /home (luks) After installing Fedora 19 my system booted into Win7 instead of Fedora 19. I have found out that the EFI entry of my previous Fedora 17 install hasn't been modified and it was no longer valid. So bootnext booted my Win7. Fedora 17 efi entry pointed previously to "\EFI\redhat\grub.efi" I have made a new efi entry pointing to "\EFI\fedora\grubx64.efi" and I named it "Fedora 19+" I got a grub2 shell. Manually giving the root, linuxefi, initrdefi and boot commands my Fedora 19 booted successfully. Now I did a "grub2-mkconfig -o /boot/grub2/grub2.cfg" At this point I still get the grub2 shell on boot and I need to issue the "configfile (hd0,gpt5)/grub2/grub2.cfg". Then I get the boot-menu I want to load automatically. Question is where to put and how to name my grub2.cfg or what to modify additionally to get grub config loaded automatically. Best regards, Robert Dady

1 0

Re: encription
by Patrick Dupre 30 Sep '13

30 Sep '13

> On 28.09.2013, Patrick Dupre wrote: > > > I would like that it ask me the paraphrase every time that the key > > in replugged. How can I get this behavior? > > You have to check if there's something which caches your passphrase, > and in this case you should prevent your passphrase from being > cached. If this isn't the case, you can take a look into /dev/mapper > and see if your crypto-device is properly unregistered. If it's not, > you'll have to do that manually: > > cryptsetup close /dev/mapper/your_device I did close (after umount and using root) /dev/mapper/luks-61967fe7-9143-45ea-aaf5-2e2697dbfeed but again, when I plug the key back, it mounts the vol without askig the passphrase. > Anyway, you could choose to mount/umount your device manually all the > way, to avoid some third partys software to interact. This would solve > your problems immediately. > =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================

2 1

Workaround for openjdk misconfiguration?
by Scott Beamer 30 Sep '13

30 Sep '13

Greetings all, When updating openjdk and openjdk-devel the following happens... [...] Cleanup : 1:java-1.7.0-openjdk- devel-1.7.0.60-2.4.2.4.fc19.x86_64 21/29 /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.4.fc19.x86_64/bin/javac has not been configured as an alternative for javac /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.4.fc19.x86_64 has not been configured as an alternative for java_sdk_openjdk /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.4.fc19.x86_64 has not been configured as an alternative for java_sdk_1.7.0 [...] Cleanup : 1:java-1.7.0- openjdk-1.7.0.60-2.4.2.4.fc19.x86_64 27/29 /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.4.fc19.x86_64/jre/bin/java has not been configured as an alternative for java /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.4.fc19.x86_64/jre has not been configured as an alternative for jre_openjdk /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.4.fc19.x86_64/jre has not been configured as an alternative for jre_1.7.0 [...] A bug report has been filed: https://bugzilla.redhat.com/show_bug.cgi? id=991762 In the meantime, what is the workaround for this? Thanks. Scott

2 1

Re: encription
by Patrick Dupre 30 Sep '13

30 Sep '13

> >> Hello, > >> > >> I encripted one partition of a usb key. > >> When I plug it, it used to ask me about the paraphase, but after I > >> entered one time, the partition is mounted. Then, I can eject the > >> key, and replug it, > >> but it does not ask me anymore the paraphrase, mounting the partition > >> automatically. > >> I would like that it ask me the paraphrase every time that the key > >> in replugged. > >> How can I get this behavior? > > > > Did you actually eject or dismount the USB device (via the umount or > > eject commands or desktop options) or did you simply unplug it? If you > > unmounted or ejected it, I'd imagine you'd be asked for the passphrase > > the next time you mounted it. If it doesn't ask, then yeah, we have an > > issue--nothing having to do with that device should be cached. > > > > If all you did was unplug it, then the filesystem was never closed, the > > system never saw it as unmounted and the current mount is still valid. > > If that is the case, you're lucky it wasn't corrupted (you must have > > waited long enough between write operations for changes to be flushed > > to the device). > > ---------------------------------------------------------------------- > > - Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com - > > - AIM/Skype: therps2 ICQ: 22643734 Yahoo: origrps2 - > > - - > > - "Microsoft is a cross between The Borg and the Ferengi. - > > - Unfortunately they use Borg to do their marketing and Ferengi to - > > - do their programming." -- Simon Slavin - > > ---------------------------------------------------------------------- > did you check if the gnome key ring program is keeping the password How can I chek this? so > that it will not prompt you. Generally, when you put the password, there > is a check on save the password. > This is my experience encfs > -- > Joseph Loo > jloo(a)acm.org > > -- > users mailing list > users(a)lists.fedoraproject.org > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > Have a question? Ask away: http://ask.fedoraproject.org =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================

1 0

yum grouplist does not show all groups
by Özgür 30 Sep '13

30 Sep '13

Hi, The command yum grouplist does not show all available groups in Fedora 19. I had the same problem before in CentOS and other versions of Fedora. As an example, I can install yum groupinstall "Development Libraries" but yum grouplist does not show such a group. Is that a bug, or am I doing something wrong? Regards, Ozgur

3 3

Update Dependancies broken for the past few days.
by Scott Beamer 29 Sep '13

29 Sep '13

Greetings all, I'm running KDE on Fedora 19 X64 For the past 2-3 days I've had problems updating a number of packages because of failed dependencies. For a while I figured it was a problem that would resolve itself once the mirrors were updated, but so far, the problem persists. II've done 'yum clean all' numerous times to no avail. Is this a problem on my end or Fedora's end? Here is the the output of 'yum update': $ sudo yum update Loaded plugins: langpacks, refresh-packagekit Resolving Dependencies --> Running transaction check ---> Package kcm_colors.x86_64 0:4.10.5-3.fc19 will be updated ---> Package kcm_colors.x86_64 0:4.11.1-2.fc19 will be an update ---> Package kde-workspace.x86_64 0:4.10.5-3.fc19 will be updated ---> Package kde-workspace.x86_64 0:4.11.1-2.fc19 will be an update --> Processing Dependency: libxcb-keysyms.so.1()(64bit) for package: kde-workspace-4.11.1-2.fc19.x86_64 --> Processing Dependency: libxcb-image.so.0()(64bit) for package: kde-workspace-4.11.1-2.fc19.x86_64 ---> Package kde-workspace-libs.x86_64 0:4.10.5-3.fc19 will be updated --> Processing Dependency: libsolidcontrol.so.4()(64bit) for package: contour-0.3-2.fc19.x86_64 --> Processing Dependency: libsolidcontrolifaces.so.4()(64bit) for package: contour-0.3-2.fc19.x86_64 ---> Package kde-workspace-libs.x86_64 0:4.11.1-2.fc19 will be an update ---> Package kdeartwork.x86_64 0:4.10.5-1.fc19 will be updated ---> Package kdeartwork.x86_64 0:4.11.1-1.fc19 will be an update ---> Package kdeartwork-kxs.x86_64 0:4.10.5-1.fc19 will be updated ---> Package kdeartwork-kxs.x86_64 0:4.11.1-1.fc19 will be an update ---> Package kdeartwork-screensavers.x86_64 0:4.10.5-1.fc19 will be updated ---> Package kdeartwork-screensavers.x86_64 0:4.11.1-1.fc19 will be an update ---> Package kdm.x86_64 0:4.10.5-3.fc19 will be updated ---> Package kdm.x86_64 0:4.11.1-2.fc19 will be an update ---> Package kgreeter-plugins.x86_64 0:4.10.5-3.fc19 will be updated ---> Package kgreeter-plugins.x86_64 0:4.11.1-2.fc19 will be an update ---> Package konsole.x86_64 0:4.10.5-1.fc19 will be updated ---> Package konsole.x86_64 0:4.11.1-1.fc19 will be an update ---> Package konsole-part.x86_64 0:4.10.5-1.fc19 will be updated ---> Package konsole-part.x86_64 0:4.11.1-1.fc19 will be an update ---> Package libkworkspace.x86_64 0:4.10.5-3.fc19 will be updated ---> Package libkworkspace.x86_64 0:4.11.1-2.fc19 will be an update ---> Package mesa-libwayland-egl.x86_64 0:9.2-1.20130902.fc19 will be updated ---> Package mesa-libwayland-egl.x86_64 0:9.2-1.20130919.fc19 will be an update ---> Package plasma-scriptengine-python.x86_64 0:4.10.5-3.fc19 will be updated ---> Package plasma-scriptengine-python.x86_64 0:4.11.1-2.fc19 will be an update --> Running transaction check ---> Package kde-workspace-libs.x86_64 0:4.10.5-3.fc19 will be updated --> Processing Dependency: libsolidcontrol.so.4()(64bit) for package: contour-0.3-2.fc19.x86_64 --> Processing Dependency: libsolidcontrolifaces.so.4()(64bit) for package: contour-0.3-2.fc19.x86_64 ---> Package xcb-util-image.x86_64 0:0.3.9-2.fc19 will be installed ---> Package xcb-util-keysyms.x86_64 0:0.3.9-2.fc19 will be installed --> Finished Dependency Resolution Error: Package: contour-0.3-2.fc19.x86_64 (@fedora) Requires: libsolidcontrolifaces.so.4()(64bit) Removing: kde-workspace-libs-4.10.5-3.fc19.x86_64 (@updates) libsolidcontrolifaces.so.4()(64bit) Updated By: kde-workspace-libs-4.11.1-2.fc19.x86_64 (updates) Not found Available: kde-workspace-libs-4.10.4-1.fc19.x86_64 (fedora) libsolidcontrolifaces.so.4()(64bit) Error: Package: contour-0.3-2.fc19.x86_64 (@fedora) Requires: libsolidcontrol.so.4()(64bit) Removing: kde-workspace-libs-4.10.5-3.fc19.x86_64 (@updates) libsolidcontrol.so.4()(64bit) Updated By: kde-workspace-libs-4.11.1-2.fc19.x86_64 (updates) Not found Available: kde-workspace-libs-4.10.4-1.fc19.x86_64 (fedora) libsolidcontrol.so.4()(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Thanks. Scott

8 21

FC18 - Libreoffice keeps crashing
by Paul Erickson 29 Sep '13

29 Sep '13

For some reason whenever I try to configure Libreoffice, for instance to change the default language setting, or try to change the font in a document, Libreoffice keeps crashing. I get the following error message: Xlib: extension "RANDR" missing on display ":0.0". Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve property `GtkOptionMenu::indicator-size' of type `GtkRequisition' from rc file value "0" of type `glong' Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve property `GtkOptionMenu::indicator-spacing' of type `GtkBorder' from rc file value "0" of type `glong' I have tried uninstalling and reinstalling without success. Has anyone else encountered this, and if so, how have you resolved it? -- ---------------------------------------------------------------- cheers, Paul - VA7NT - email: va7nt(a)telus.net "Those who hear not the music, think the dancers mad." "Tolerance becomes a crime when applied to evil." - Thomas Mann "That state which separates it's warriors from it's scholars will have it's thinking done by cowards and fighting done by fools" - Thucydides - The Pelopenisia "The Malice of the wicked is reinforced by the weakness of the virtuous." - Churchill

5 11

Reboot hangs from Cinnamon
by Frank McCormick 29 Sep '13

29 Sep '13

I have several desktops installed on my 19 install, including Cinnamon and Mate. I noticed this morning for the first time that a reboot from Cinnamon hangs. I end up with a blank screen and one line at the time which as I recall mentions reboot and some numbers. Does anyone have a clue as to what is wrong? Mate reboots fine as does XFCE. Cheers

1 0

Problems booting Fedora 19 with UEFI
by Edward Quick 28 Sep '13

28 Sep '13

Hi, I recently purchased a Dell Inspiron 5721 which came with Windows 8. I would like to dual boot this with Fedora but am having problems running the Fedora Install. I have Fedora-19-x86_64-DVD.iso on usb, and whenever I boot with UEFI (secure on or off), the boot process hangs at the line, Reached target Basic System: [ 12.650116] localhost systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.650553] localhost systemd[1]: Starting Paths. [ 12.650962] localhost systemd[1]: Reached target Paths. [ 12.651376] localhost systemd[1]: Starting Basic System. [ 12.651829] localhost systemd[1]: Reached target Basic System. And then bails out after a few minutes and starts up the Dracut Emergency Shell: [ 35.729286] localhost multipathd[108]: sdc: add path (uevent) [ 35.915042] localhost multipathd[108]: sdc: update path write_protect to '0' (uevent) [ 36.008982] localhost multipathd[108]: sdc: update path write_protect to '1' (uevent) [ 197.571596] localhost dracut-initqueue[395]: Warning: Could not boot. [ 197.574126] localhost dracut-initqueue[395]: Warning: /dev/root does not exist [ 197.578383] localhost systemd[1]: Starting Dracut Emergency Shell... I have pasted the full sosreport.txt at http://pastebin.com/4stUgUDN Please note that if I install in basic graphics mode, I still get the same result. The only way I can get the install to work, is if I boot in legacy mode. Unfortunately after doing this, I can no longer boot up Windows. If anyone knows how to fix this, I'd be really grateful for some help :-) Many thanks, Ed

4 6

readline (in c)
by Patrick Dupre 28 Sep '13

28 Sep '13

Hello, It is probably not the right list to post my question, just in case! I would like to catch the ESC or ctl C key when using readline. Is it possible? Thank =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France ===========================================================================

2 1

← Newer
1
2
3
4
5
6
7
8
...
25
Older →

Jump to page: