users December 2014

users@lists.fedoraproject.org

173 participants
222 discussions

F21 rpc-gssd and systemd
by Ian Chapman 12 Dec '14

12 Dec '14

Hi, I use NFS4 with Kerberos. How do you enable the rpc-gssd service so that it starts on boot? If I manually start the service after boot, everything works as expected, but I'm suspecting a bug in the nfs-utils systemd service files. Thanks. -- Ian Chapman.

1 0

Backup solution
by Ali AlipourR 12 Dec '14

12 Dec '14

Hi I'm new to Linux and unix-like systems, I need some advice on backup solution for file level and block level backups for file-level backups I found fsarchiver, dar, tar and for file-system-level fsarchiver, clonezilla/partclone and dd appropriate based on my requirements (data integrity and confidentiality, mount and single-file-restoration capabilities, btrfs and GPT support, ACL/Selinux preservation, xz compression) Advantage of tar and dd is that they are available every where but I'm mostly concerned about file integrity with tar and dd copies all unused blocks of file system too (fsarchiver or clonezilla/partclone will only copy file-system + MBR) I need some advice on Backup solutions, what is your personal methods and solutions? Any advice would be most welcome Thanks

6 9

F21 server and vesa
by Kevin Wilson 12 Dec '14

12 Dec '14

Hello, I installed F21 server, x86_64. Now, as expected from a server, it does not contain kde or gnome. I know that server usually does not need to run XWindows applications. However, I need from time to time to use xwindows applications on the server, like some monitoring tools (wireshark and others). So I ran "yum install -y @kde" and after it completer, I ran: startx. However, I got this error: ... (EE) Failed to load module "vesa" (module does not exist) ... And X windows did not start. Is there any way to resolve this and enable running XWindows ? Regards, Kevin

4 4

Garbage on screen with F20 & F21 - ATI free drivers
by Frederic Muller 12 Dec '14

12 Dec '14

Hi! I got a garbaged screen since a big xorg update about 3 weeks agoon F20. I usually don't complain as problems tend to get fixed very fast. Though this one didn't and I decided to upgrade to F21...to notice the problem is there too. I haven't found any recent bug describing the issue and was therefore posting here wondering if it was me or not. A bit more information about this issue: - "effect" visible at http://snag.gy/AGPaq.jpg - lpci -v bash-4.3$ lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge Subsystem: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge Flags: bus master, 66MHz, medium devsel, latency 0 Capabilities: <access denied> 00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 25 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22 I/O ports at c000 [size=8] I/O ports at b000 [size=4] I/O ports at a000 [size=8] I/O ports at 9000 [size=4] I/O ports at 8000 [size=16] Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at feafd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at feaff800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at feafc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at feafb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 Memory at feaff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: 66MHz, medium devsel Capabilities: <access denied> Kernel modules: i2c_piix4, sp5100_tco 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 I/O ports at 0170 [size=8] I/O ports at 0374 I/O ports at ff00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp Kernel modules: pata_atiixp, pata_acpi, ata_generic 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, slow devsel, latency 64, IRQ 16 Memory at feaf4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 4396 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at feafa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration Flags: fast devsel Capabilities: <access denied> 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control Flags: fast devsel Capabilities: <access denied> Kernel driver in use: k10temp Kernel modules: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control Flags: fast devsel 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 6770] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited / Sapphire Technology Device 1484 Flags: bus master, fast devsel, latency 0, IRQ 27 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at febc0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at feba0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series] Subsystem: PC Partner Limited / Sapphire Technology Device aa58 Flags: bus master, fast devsel, latency 0, IRQ 28 Memory at febf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7715 Flags: bus master, fast devsel, latency 0, IRQ 26 I/O ports at e800 [size=256] Memory at fdfff000 (64-bit, prefetchable) [size=4K] Memory at fdff8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 - dmesg.log unfound... but I think it has disappeared. Let me know if you need anything else. Thank you. Fred

1 0

Rpmfusion
by jarmo 12 Dec '14

12 Dec '14

Seems, that RPMFUSION is not yet up to date with Fedora 21.. Jarmo

6 10

fedup: WiFi failure
by Timothy Murphy 11 Dec '14

11 Dec '14

After updating Fedora-20/KDE to Fedora-21 on my ThinkPad-T61 with fedup, I find that WiFi is no longer working. The WiFi card is Intel Corporation PRO/Wireless 4965 . It seems that the kernel-modules package was not updated by fedup, although this is not metioned in /var/log/fedup.log . After yum-installing kernel-modules and running "sudo modprobe iwl4965", lsmod shows that the module is installed, but WiFi is still not working, even after re-booting, though the module remained loaded. I'm not sure what to do in these systemd days - in previous times I might have looked at /etc/udev/rules.d/ but this seems denuded now. Any advice or suggestions gratefully received. -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

1 0

Raid 1 and Anaconda -
by Bob Goodwin 11 Dec '14

11 Dec '14

I want to install Fedora 21 Server. I have two "750G" drives, both formatted for raid, type "fd." boot 2G, / 30G, home/ whatever the remainder. I did not create a file system, assuming that would be created by the installer? Anyway, Raid is not being offered as an option. I've had this problem with SL-7 also, and know that if I proceed with the installation I will have everything installed on one disk without the mirrored raid, Or perhaps I need to use LVM rather than standard partitions?. What am I doing wrong? Bob. -- http://www.qrz.com/db/W2BOD box10 Fedora-20/64bit Linux/XFCE

2 6

Fedora 21 64bit ram usage
by William Biggs 11 Dec '14

11 Dec '14

I installed 21 yesterday and I seen that I was using 1.5 g of ram. I didn't have anything running but the os it self I have a Dell I7 3.9 g and 8 g of ram . Has anyone else ham this problem and no how to fix it . When I opened my mail and open Firefox I go up to 3.6g of ram . All the fans pick up to pull the heat off like they should Sent from my HTC

4 3

R in F21 older than in F19
by Heinz Diehl 11 Dec '14

11 Dec '14

Hi, installed one machine with F21 today. One of the programs I'm using most is the statistical software R. What's weird is that on F19, R is in the version 3.1.2, while the 2 releases newer F21 has version 3.1.1. Does anybody know what's going on here?

2 2

after upgrade 20->21 gnome crashes when using rpmfusion's kmod-nvidia
by Jouk Jansen 11 Dec '14

11 Dec '14

Hi All I upgraded my systems from 20 to 21 using FEDUP. On one of these systems I did into problems when using kmod-nvidia from rpmfusion. Just after the upgrade boot did hang just before starting the gnome display manager (so no login screen). After removing all the kmod-nvidia's the machine booted correctly. After that I tried to install kmod-nvidia again, but this results in a crash of gnome when it tries to setup the login screen. Does anybody know or point me in the direction of a solution? Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 1

← Newer
1
...
13
14
15
16
17
18
19
...
23
Older →

Jump to page: