users March 2014

users@lists.fedoraproject.org

180 participants
215 discussions

RAGE XL Framebuffer
by Yanick Quirion 05 Jun '15

05 Jun '15

Hi all I know that is not a specific question about Fedora, but I can't find answer on the kernel mailing list. Is somebody having server with integrated ATI RAGE XL video card? Is it possible to patch the kernel to support this video card? If I add VGA=791 in my grub.conf, I will have a resolution of 1024x768 which is good, but the display is very slow (especially when the screen is scrolling). If I use I this: "video=aty128fb:1024x768@70" it will not work. I'm using kernel 2.4.22 but I will try 2.6.0-test11 today. If somebody has a patch, a link or anything else that can help me, it will be appreciated. Thanks for your help. Regards, ----------- Yanick Quirion Administrateur Réseau/Network Manager NEOKIMIA INC. Institut de Pharmacologie de Sherbrooke 3e étage (Édifice Z5) 3001 12e avenue Nord Sherbrooke, Québec CANADA J1H 5N4 Tél.: +1 819 820-6040 Direct: +1 819 820-6855 Fax.: +1 819 820-6841 email: Yanick.Quirion(a)neokimia.com

2 1

Soundblaster
by Antonio Montagnani 05 Jun '15

05 Jun '15

I have two similar PC (old Pentium but workin fine) In Pc no.1 I upgraded from RH8 to Fedora and it went fine: Soundblaster is working fine In Pc no.2 I made a fresh installation but in redhat-sound-config Fedora doesn't see any card, that was working on Redhat 9 after soundconfig... Where is the trick?? I assume that my Sounblaster is an old 16...but fine on a router/firewall. Tnx Antonio

4 6

RPM build error
by Ranjan Maitra 14 Feb '15

14 Feb '15

Hello, I am trying to build an RPM for sylfilter available at http://sylpheed.sraoss.jp/sylfilter/src/sylfilter-%{?version}.tar.gz with the attached .spec file but I get the following errors: ..... error: Installed (but unpackaged) file(s) found: /usr/include/sylfilter/bayes-filter.h /usr/include/sylfilter/blacklist-filter.h /usr/include/sylfilter/filter-kvs-gdbm.h /usr/include/sylfilter/filter-kvs-qdbm.h /usr/include/sylfilter/filter-kvs-sqlite.h /usr/include/sylfilter/filter-kvs.h /usr/include/sylfilter/filter-manager.h /usr/include/sylfilter/filter-utils.h /usr/include/sylfilter/filter.h /usr/include/sylfilter/ngram-filter.h /usr/include/sylfilter/textcontent-filter.h /usr/include/sylfilter/whitelist-filter.h /usr/include/sylfilter/wordsep-filter.h /usr/lib64/libsylfilter.a /usr/lib64/libsylfilter.la /usr/lib64/libsylfilter.so /usr/lib64/libsylfilter.so.0 /usr/lib64/libsylfilter.so.0.0.0 RPM build errors: Installed (but unpackaged) file(s) found: /usr/include/sylfilter/bayes-filter.h /usr/include/sylfilter/blacklist-filter.h /usr/include/sylfilter/filter-kvs-gdbm.h /usr/include/sylfilter/filter-kvs-qdbm.h /usr/include/sylfilter/filter-kvs-sqlite.h /usr/include/sylfilter/filter-kvs.h /usr/include/sylfilter/filter-manager.h /usr/include/sylfilter/filter-utils.h /usr/include/sylfilter/filter.h /usr/include/sylfilter/ngram-filter.h /usr/include/sylfilter/textcontent-filter.h /usr/include/sylfilter/whitelist-filter.h /usr/include/sylfilter/wordsep-filter.h /usr/lib64/libsylfilter.a /usr/lib64/libsylfilter.la /usr/lib64/libsylfilter.so /usr/lib64/libsylfilter.so.0 /usr/lib64/libsylfilter.so.0.0.0 Not sure what the issue is, but wondering if anyone had any suggestions? Many thanks and best wishes, Ranjan -- Important Notice: This mailbox is ignored: e-mails are set to be deleted on receipt. Please respond to the mailing list if appropriate. For those needing to send personal or professional e-mail, please use appropriate addresses. ____________________________________________________________ GET FREE 5GB EMAIL - Check out spam free email with many cool features! Visit http://www.inbox.com/email to find out more!

6 17

WiFi permanently disappeared after booting test kernel
by Mike Fleetwood 26 Aug '14

26 Aug '14

Hi, On my netbook I booted a test kernel 3.8.0-rc4+ I compiled. Now after booting back into my regular Fedora kernel 3.6.11-5.fc17.i686.PAE my wifi network device remains permanently disappeared. No wifi networks displayed in Network Manager gui. Also the Network Manager syslog messages make it look like the device has completely disappeared. Suggestions for restoring wifi welcome. Thanks Mike Fragment of Network Manager syslog messages when working before --8<-- Jan 18 23:01:53 edge NetworkManager[479]: <info> monitoring kernel firmware directory '/lib/firmware'. Jan 18 23:01:53 edge NetworkManager[479]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:01:00.0/ieee80211/phy0/rfkill2) (driver ath9k) Jan 18 23:01:53 edge NetworkManager[479]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/eeepc/rfkill/rfkill0) (platform driver eeepc) Jan 18 23:01:53 edge NetworkManager[479]: <info> rfkill4: found WWAN radio killswitch (at /sys/devices/platform/eeepc/rfkill/rfkill4) (platform driver eeepc) Jan 18 23:01:53 edge NetworkManager[479]: <info> WiFi enabled by radio killswitch; enabled by state file Jan 18 23:01:53 edge NetworkManager[479]: <info> WWAN enabled by radio killswitch; enabled by state file Jan 18 23:01:53 edge NetworkManager[479]: <info> WiMAX enabled by radio killswitch; enabled by state file Jan 18 23:01:53 edge NetworkManager[479]: <info> Networking is enabled by state file ... Jan 18 23:01:53 edge NetworkManager[479]: <info> (wlan0): using nl80211 for WiFi device control Jan 18 23:01:53 edge NetworkManager[479]: <warn> (wlan0): driver supports Access Point (AP) mode Jan 18 23:01:53 edge NetworkManager[479]: <info> (wlan0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3) Jan 18 23:01:53 edge NetworkManager[479]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 Jan 18 23:01:53 edge NetworkManager[479]: <info> (wlan0): now managed Jan 18 23:01:53 edge NetworkManager[479]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Jan 18 23:01:53 edge NetworkManager[479]: <info> (wlan0): bringing up device. ... Jan 18 23:01:59 edge NetworkManager[479]: <info> Activation (wlan0) successful, device activated. Jan 18 23:01:59 edge NetworkManager[479]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete. Fragment of Network Manager syslog messages when broken after --8<-- Jan 28 18:43:26 edge NetworkManager[466]: <info> monitoring kernel firmware directory '/lib/firmware'. Jan 28 18:43:26 edge NetworkManager[466]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/eeepc/rfkill/rfkill0) (platform driver eeepc) Jan 28 18:43:26 edge NetworkManager[466]: <info> rfkill2: found WWAN radio killswitch (at /sys/devices/platform/eeepc/rfkill/rfkill2) (platform driver eeepc) Jan 28 18:43:26 edge NetworkManager[466]: <info> WiFi disabled by radio killswitch; enabled by state file Jan 28 18:43:26 edge NetworkManager[466]: <info> WWAN enabled by radio killswitch; enabled by state file Jan 28 18:43:26 edge NetworkManager[466]: <info> WiMAX enabled by radio killswitch; enabled by state file Jan 28 18:43:26 edge NetworkManager[466]: <info> Networking is enabled by state file No (wlan0) related NetworkManager syslog messages afterwards at all.

4 3

losing WiFi Access - prompted for password
by SternData 09 Jun '14

09 Jun '14

F18... Over the last few days, I'm getting prompted to re-enter my password for my WiFi network. It's not the router because no other device on the network seems to be having problems. Potential changes on my system include May 07 21:39:32 Updated: 1:wpa_supplicant-1.1-1.fc18.x86_64 May 25 15:33:44 Installed: kernel-3.9.3-201.fc18.x86_64 May 27 08:06:42 Updated: 1:NetworkManager-glib-0.9.8.1-3.git20130514.fc18.x86_64 May 27 08:06:47 Updated: 1:NetworkManager-0.9.8.1-3.git20130514.fc18.x86_64 May 27 08:06:53 Updated: network-manager-applet-0.9.8.1-4.git20130514.fc18.x86_64 Given that this has really started the day before yesterday, I suspect it has something to do with the NetworkManager update. Is anyone else having this problem? (Please -- do not tell me to "dump the evil NetworkManager". I'm trying to solve a problem here, not make some stand against the tide. Thanks.) -- -- Steve

3 3

All-in-one laser printer recommendation
by Patrick O'Callaghan 29 Apr '14

29 Apr '14

I'm on the lookout for a reliable all-in-one mono laser printer to use under Fedora. Must be networked, preferably wireless, and both print and scan functions must be supported with standard tools (CUPS etc.) The Samsung Xpress M2070W looks like a good all-rounder but I'm unsure about Linux support. Google seems to show a variety of opinions. Anyone have one of these beasties, or have an alternative to recommend? poc

17 44

640x480 only res available after f14 - f20 upgrade?
by Morgan Read 21 Apr '14

21 Apr '14

Hello Folks I've upgraded a server to f20 that was running f14. There was no issue with screen geometry/ resolution in f14, but now the only resolution available via gnome is 640x480. That makes the machine virtually impossible to use in a graphic environment. I've followed these links here: * https://ask.fedoraproject.org/en/question/8301/how-do-i-change-my-monitors-… * https://wiki.archlinux.org/index.php/Xrandr#Adding_undetected_resolutions * http://fedoraforum.org/forum/showthread.php?p=1584620 But, all to no avail... I'd really appreciate anybody pointing me in the right direction(s) - I suspect I've just not done something really straight forward as it seems very strange that this old HP ProLiant ML 150 and equally old Dell 1703FP monitor combo which worked fine under f14 now doesn't under f20. Here's some info from the Xorg log, from my 'no knowledge' assessment, perhaps: [ 22.239] (II) modesetting(0): Output VGA-0 using initial mode 640x480 +0+0 Is the most meaningful line? Many thanks, Morgan. [ 21.028] X.Org X Server 1.14.4 Release Date: 2013-10-31 [ 21.028] X Protocol Version 11, Revision 0 [ 21.028] Build Operating System: 3.12.8-300.fc20.x86_64 [ 21.028] Current Operating System: Linux localhost.localdomain 3.13.5-200.fc20.x86_64 #1 SMP Mon Feb 24 16:51:35 UTC 2014 x86_64 [ 21.028] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.5-200.fc20.x86_64 root=/dev/mapper/VG_System-lv_root ro rd.lvm.lv=VG_System/lv_swap vconsole.font=latarcyrheb-sun16 video=1280x1024 rd.lvm.lv=VG_System/lv_root rhgb quiet LANG=en_US.UTF-8 [ 21.029] Build Date: 04 February 2014 10:57:37PM [ 21.029] Build ID: xorg-x11-server 1.14.4-6.fc20 [ 21.029] Current version of pixman: 0.30.0 [ 21.029] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.029] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.029] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 1 23:05:53 2014 [ 21.435] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 21.435] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.578] (==) No Layout section. Using the first Screen section. [ 21.578] (==) No screen section available. Using defaults. [ 21.578] (**) |-->Screen "Default Screen Section" (0) [ 21.578] (**) | |-->Monitor "<default monitor>" [ 21.850] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 21.850] (==) Automatically adding devices [ 21.850] (==) Automatically enabling devices [ 21.850] (==) Automatically adding GPU devices [ 21.850] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 21.850] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 21.850] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.850] (II) Loader magic: 0x80dd00 [ 21.850] (II) Module ABI versions: [ 21.850] X.Org ANSI C Emulation: 0.4 [ 21.850] X.Org Video Driver: 14.1 [ 21.850] X.Org XInput driver : 19.2 [ 21.850] X.Org Server Extension : 7.0 [ 21.850] (II) xfree86: Adding drm device (/dev/dri/card0) [ 21.854] (--) PCI: (0:4:2:0) 14f1:8800:0070:9202 rev 5, Mem @ 0xd9000000/16777216, BIOS @ 0x????????/65536 [ 21.854] (--) PCI:*(0:7:2:0) 102b:0522:103c:31fa rev 2, Mem @ 0xde000000/16777216, 0xdd810000/16384, 0xdd000000/8388608, BIOS @ 0x????????/65536 [ 21.854] Initializing built-in extension Generic Event Extension [ 21.854] Initializing built-in extension SHAPE [ 21.854] Initializing built-in extension MIT-SHM [ 21.854] Initializing built-in extension XInputExtension [ 21.854] Initializing built-in extension XTEST [ 21.854] Initializing built-in extension BIG-REQUESTS [ 21.854] Initializing built-in extension SYNC [ 21.854] Initializing built-in extension XKEYBOARD [ 21.854] Initializing built-in extension XC-MISC [ 21.854] Initializing built-in extension XINERAMA [ 21.854] Initializing built-in extension XFIXES [ 21.854] Initializing built-in extension RENDER [ 21.854] Initializing built-in extension RANDR [ 21.854] Initializing built-in extension COMPOSITE [ 21.854] Initializing built-in extension DAMAGE [ 21.854] Initializing built-in extension MIT-SCREEN-SAVER [ 21.854] Initializing built-in extension DOUBLE-BUFFER [ 21.854] Initializing built-in extension RECORD [ 21.854] Initializing built-in extension DPMS [ 21.854] Initializing built-in extension X-Resource [ 21.854] Initializing built-in extension XVideo [ 21.854] Initializing built-in extension XVideo-MotionCompensation [ 21.854] Initializing built-in extension SELinux [ 21.855] Initializing built-in extension XFree86-VidModeExtension [ 21.855] Initializing built-in extension XFree86-DGA [ 21.855] Initializing built-in extension XFree86-DRI [ 21.855] Initializing built-in extension DRI2 [ 21.855] (II) "glx" will be loaded by default. [ 21.855] (WW) "xwayland" is not to be loaded by default. Skipping. [ 21.855] (II) LoadModule: "dri2" [ 21.855] (II) Module "dri2" already built-in [ 21.855] (II) LoadModule: "glamoregl" [ 21.855] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 21.858] (II) Module glamoregl: vendor="X.Org Foundation" [ 21.858] compiled for 1.14.4, module version = 0.5.1 [ 21.859] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.859] (II) LoadModule: "glx" [ 22.167] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 22.168] (II) Module glx: vendor="X.Org Foundation" [ 22.168] compiled for 1.14.4, module version = 1.0.0 [ 22.168] ABI class: X.Org Server Extension, version 7.0 [ 22.168] (==) AIGLX enabled [ 22.168] Loading extension GLX [ 22.168] (==) Matched mga as autoconfigured driver 0 [ 22.168] (==) Matched mga as autoconfigured driver 1 [ 22.168] (==) Matched modesetting as autoconfigured driver 2 [ 22.168] (==) Matched fbdev as autoconfigured driver 3 [ 22.168] (==) Matched vesa as autoconfigured driver 4 [ 22.168] (==) Assigned the driver to the xf86ConfigLayout [ 22.168] (II) LoadModule: "mga" [ 22.168] (II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so [ 22.168] (II) Module mga: vendor="X.Org Foundation" [ 22.168] compiled for 1.14.2, module version = 1.6.2 [ 22.168] Module class: X.Org Video Driver [ 22.168] ABI class: X.Org Video Driver, version 14.1 [ 22.168] (II) LoadModule: "modesetting" [ 22.168] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 22.168] (II) Module modesetting: vendor="X.Org Foundation" [ 22.169] compiled for 1.14.2, module version = 0.8.0 [ 22.169] Module class: X.Org Video Driver [ 22.169] ABI class: X.Org Video Driver, version 14.1 [ 22.169] (II) LoadModule: "fbdev" [ 22.169] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 22.169] (II) Module fbdev: vendor="X.Org Foundation" [ 22.169] compiled for 1.14.2, module version = 0.4.3 [ 22.169] Module class: X.Org Video Driver [ 22.169] ABI class: X.Org Video Driver, version 14.1 [ 22.169] (II) LoadModule: "vesa" [ 22.169] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 22.169] (II) Module vesa: vendor="X.Org Foundation" [ 22.169] compiled for 1.14.2, module version = 2.3.2 [ 22.169] Module class: X.Org Video Driver [ 22.169] ABI class: X.Org Video Driver, version 14.1 [ 22.169] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550 [ 22.170] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 22.170] (II) FBDEV: driver for framebuffer: fbdev [ 22.170] (II) VESA: driver for VESA chipsets: vesa [ 22.170] (++) using VT number 1 [ 22.172] (EE) mga: The PCI device 0x522 at 07@00:02:0 has a kernel module claiming it. [ 22.172] (EE) mga: This driver cannot operate until it has been unloaded. [ 22.172] (EE) mga: The PCI device 0x522 at 07@00:02:0 has a kernel module claiming it. [ 22.172] (EE) mga: This driver cannot operate until it has been unloaded. [ 22.172] (II) modesetting(0): using drv /dev/dri/card0 [ 22.172] (WW) Falling back to old probe method for fbdev [ 22.172] (II) Loading sub module "fbdevhw" [ 22.172] (II) LoadModule: "fbdevhw" [ 22.172] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 22.172] (II) Module fbdevhw: vendor="X.Org Foundation" [ 22.172] compiled for 1.14.4, module version = 0.0.2 [ 22.172] ABI class: X.Org Video Driver, version 14.1 [ 22.172] (WW) Falling back to old probe method for vesa [ 22.173] (II) modesetting(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 22.173] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32 [ 22.173] (==) modesetting(0): RGB weight 888 [ 22.173] (==) modesetting(0): Default visual is TrueColor [ 22.173] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 22.205] (II) modesetting(0): Output VGA-0 has no monitor section [ 22.238] (II) modesetting(0): EDID for output VGA-0 [ 22.238] (II) modesetting(0): Manufacturer: DEL Model: 3010 Serial#: 1144075829 [ 22.238] (II) modesetting(0): Year: 2004 Week: 2 [ 22.238] (II) modesetting(0): EDID Version: 1.3 [ 22.238] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 22.238] (II) modesetting(0): Sync: Separate Composite SyncOnGreen [ 22.238] (II) modesetting(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 22.238] (II) modesetting(0): Gamma: 2.20 [ 22.238] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 22.238] (II) modesetting(0): Default color space is primary color space [ 22.238] (II) modesetting(0): First detailed timing is preferred mode [ 22.238] (II) modesetting(0): redX: 0.646 redY: 0.359 greenX: 0.278 greenY: 0.612 [ 22.238] (II) modesetting(0): blueX: 0.145 blueY: 0.117 whiteX: 0.310 whiteY: 0.330 [ 22.238] (II) modesetting(0): Supported established timings: [ 22.238] (II) modesetting(0): 720x400@70Hz [ 22.238] (II) modesetting(0): 640x480@60Hz [ 22.238] (II) modesetting(0): 640x480@75Hz [ 22.238] (II) modesetting(0): 800x600@60Hz [ 22.238] (II) modesetting(0): 800x600@75Hz [ 22.238] (II) modesetting(0): 1024x768@60Hz [ 22.238] (II) modesetting(0): 1024x768@75Hz [ 22.238] (II) modesetting(0): 1280x1024@75Hz [ 22.238] (II) modesetting(0): Manufacturer's mask: 0 [ 22.238] (II) modesetting(0): Supported standard timings: [ 22.238] (II) modesetting(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 22.238] (II) modesetting(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 22.238] (II) modesetting(0): Supported detailed timing: [ 22.238] (II) modesetting(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 22.238] (II) modesetting(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 22.238] (II) modesetting(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 22.238] (II) modesetting(0): Serial No: 2Y31741AD165 [ 22.238] (II) modesetting(0): Monitor name: DELL 1703FP [ 22.238] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz [ 22.238] (II) modesetting(0): EDID (in hex): [ 22.238] (II) modesetting(0): 00ffffffffffff0010ac103035363144 [ 22.238] (II) modesetting(0): 020e01030e221b78ee8706a55c479c25 [ 22.239] (II) modesetting(0): 1e4f54a54b00714f8180010101010101 [ 22.239] (II) modesetting(0): 010101010101302a009851002a403070 [ 22.239] (II) modesetting(0): 1300520e1100001e000000ff00325933 [ 22.239] (II) modesetting(0): 3137343141443136350a000000fc0044 [ 22.239] (II) modesetting(0): 454c4c203137303346500a20000000fd [ 22.239] (II) modesetting(0): 00384c1e500e000a202020202020001e [ 22.239] (II) modesetting(0): Printing probed modes for output VGA-0 [ 22.239] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 22.239] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 22.239] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 22.239] (II) modesetting(0): Output VGA-0 connected [ 22.239] (II) modesetting(0): Using exact sizes for initial modes [ 22.239] (II) modesetting(0): Output VGA-0 using initial mode 640x480 +0+0 [ 22.239] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 22.239] (==) modesetting(0): DPI set to (96, 96) [ 22.239] (II) Loading sub module "fb" [ 22.239] (II) LoadModule: "fb" [ 22.239] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 22.240] (II) Module fb: vendor="X.Org Foundation" [ 22.240] compiled for 1.14.4, module version = 1.0.0 [ 22.240] ABI class: X.Org ANSI C Emulation, version 0.4 [ 22.240] (II) Loading sub module "shadow" [ 22.240] (II) LoadModule: "shadow" [ 22.240] (II) Loading /usr/lib64/xorg/modules/libshadow.so [ 22.240] (II) Module shadow: vendor="X.Org Foundation" [ 22.240] compiled for 1.14.4, module version = 1.1.0 [ 22.240] ABI class: X.Org ANSI C Emulation, version 0.4 [ 22.240] (II) UnloadModule: "fbdev" [ 22.240] (II) Unloading fbdev [ 22.240] (II) UnloadSubModule: "fbdevhw" [ 22.240] (II) Unloading fbdevhw [ 22.240] (II) UnloadModule: "vesa" [ 22.240] (II) Unloading vesa [ 22.240] (==) Depth 24 pixmap format is 32 bpp [ 22.241] (==) modesetting(0): Backing store disabled [ 22.241] (==) modesetting(0): Silken mouse enabled [ 22.241] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 22.241] (==) modesetting(0): DPMS enabled [ 22.454] (--) RandR disabled [ 22.464] (II) SELinux: Disabled by boolean [ 22.465] (II) AIGLX: Screen 0 is not DRI2 capable [ 22.465] (II) AIGLX: Screen 0 is not DRI capable [ 26.542] (II) AIGLX: Loaded and initialized swrast [ 26.549] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 26.550] (II) modesetting(0): Damage tracking initialized [ 26.550] (II) modesetting(0): Setting screen physical size to 169 x 127 [ 26.696] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 26.696] (**) Power Button: Applying InputClass "evdev keyboard catchall" ... ... ... [ 26.747] (II) No input driver specified, ignoring this device. [ 26.747] (II) This device may have been added with another device file. [ 32.144] (II) modesetting(0): EDID vendor "DEL", prod id 12304 [ 32.144] (II) modesetting(0): Using EDID range info for horizontal sync [ 32.144] (II) modesetting(0): Using EDID range info for vertical refresh [ 32.145] (II) modesetting(0): Printing DDC gathered Modelines: [ 32.145] (II) modesetting(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 32.145] (II) modesetting(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 32.145] (II) modesetting(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 32.145] (II) modesetting(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 32.145] (II) modesetting(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 32.145] (II) modesetting(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 32.145] (II) modesetting(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 32.145] (II) modesetting(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 32.145] (II) modesetting(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 32.145] (II) modesetting(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 35.321] (II) modesetting(0): EDID vendor "DEL", prod id 12304 [ 35.321] (II) modesetting(0): Using hsync ranges from config file [ 35.321] (II) modesetting(0): Using vrefresh ranges from config file [ 35.321] (II) modesetting(0): Printing DDC gathered Modelines: [ 35.321] (II) modesetting(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 35.321] (II) modesetting(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 35.321] (II) modesetting(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 35.321] (II) modesetting(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 35.321] (II) modesetting(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 35.321] (II) modesetting(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 35.321] (II) modesetting(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 35.321] (II) modesetting(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 35.321] (II) modesetting(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 35.321] (II) modesetting(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 137.239] (II) modesetting(0): EDID vendor "DEL", prod id 12304 [ 137.239] (II) modesetting(0): Using hsync ranges from config file [ 137.239] (II) modesetting(0): Using vrefresh ranges from config file [ 137.239] (II) modesetting(0): Printing DDC gathered Modelines: [ 137.239] (II) modesetting(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 137.239] (II) modesetting(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 137.239] (II) modesetting(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 137.239] (II) modesetting(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 137.239] (II) modesetting(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 137.239] (II) modesetting(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 137.239] (II) modesetting(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 137.239] (II) modesetting(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 137.239] (II) modesetting(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 137.239] (II) modesetting(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 137.978] (II) modesetting(0): EDID vendor "DEL", prod id 12304 [ 137.978] (II) modesetting(0): Using hsync ranges from config file [ 137.978] (II) modesetting(0): Using vrefresh ranges from config file [ 137.978] (II) modesetting(0): Printing DDC gathered Modelines: [ 137.978] (II) modesetting(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 137.978] (II) modesetting(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 137.978] (II) modesetting(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 137.978] (II) modesetting(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 137.979] (II) modesetting(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 137.979] (II) modesetting(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 137.979] (II) modesetting(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 137.979] (II) modesetting(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 137.979] (II) modesetting(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 137.979] (II) modesetting(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 148.728] (II) evdev: MCE IR Keyboard/Mouse (cx88xx): Close [ 148.728] (II) UnloadModule: "evdev" [ 148.728] (II) evdev: ServerEngines SE USB Device: Close [ 148.728] (II) UnloadModule: "evdev" [ 148.728] (II) evdev: ServerEngines SE USB Device: Close [ 148.728] (II) UnloadModule: "evdev" [ 148.728] (II) evdev: HID 413c:3010: Close [ 148.728] (II) UnloadModule: "evdev" [ 148.729] (II) evdev: cx88 IR (Hauppauge Nova-S-Plus : Close [ 148.729] (II) UnloadModule: "evdev" [ 148.729] (II) evdev: Power Button: Close [ 148.729] (II) UnloadModule: "evdev" [ 148.729] (II) evdev: Power Button: Close [ 148.729] (II) UnloadModule: "evdev" [ 149.170] (EE) Server terminated successfully (0). Closing log file. -- Morgan Read NEW ZEALAND <mailto:mstuffATreadDOTorgDOTnz> Confused about DRM? Get all the info you need at: http://drm.info/

4 5

Fedora Present and Future: a Fedora.next 2014 Update (Part I, “Why?”)
by Matthew Miller 18 Apr '14

18 Apr '14

I promised a while ago that I would provide a text version of my talk at DevConf, for people who couldn't make it and because sitting through a video of me standing up there going on and on doesn't really make for good followup discussion. Because it grew rather long, I think it works best as a web article, which you can find on Fedora Magazine at <http://fedoramagazine.org/?p=1236>. Also because of the length, I'm posting it installments. This part is the background, next part is some of the things we are doing, followed by the panel discussion, followed by Q&A. Whew; that's a lot. I can post the text here if people think it'd be really helpful to do so, (although I'm inclined to think that would be unwieldy), and in any case I will take questions, comments, complaints, in any media including replies here, on the article, on the social media, or at any bar or coffee shop within walking distance of Boston's MBTA. -- Matthew Miller -- Fedora Project -- <mattdm(a)fedoraproject.org>

37 217

brother mfc-j5910DW support?
by Aleksandar Kostadinov 14 Apr '14

14 Apr '14

Hello, I was wondering if anybody used this device with fedora 20? I'm considering to buy one. I see some drivers on brother web site but seems somehow old. I'd like to print and scan over wifi. Thank you!

3 4

FC20 and (":No such file or directory)
by Gregory P. Ennis 13 Apr '14

13 Apr '14

Everyone, I have created a new F20 install on a Toshiba laptop this afternoon, and everything has gone well until I tried to set the laptop up for our system with some perl scripts. Some of the perl scripts worked fine, but one script would not activate and resulted in a command line error message of : (": No such file or directory) I added the parenthesis, but the initial single quote is part of the message. I have evaluated the perl script and have run it on other machines without difficulty. I finally got the script to work by adding a -w switch to the first line in the form of : #!/usr/bin/perl -w I am posting this to record the problem and solution for others. Greg Ennis

3 2

Jump to page: