users April 2014

users@lists.fedoraproject.org

176 participants
173 discussions

mod_ssl.so: undefined symbol: unixd_config
by David Benfell 12 Apr '14

12 Apr '14

Hi, This is cross-posted at the forum which I found before I found the mailing list: https://ask.fedoraproject.org/en/question/44983/mod_sslso-undefined-symbol-… (My luck has generally been better with mailing lists.) This is a fresh Fedora 20 installation. I have not (yet) added any non-standard repositories. I am attempting to configure apache 2.4. It's basically a stock configuration with an old Debian/Ubuntu sites-available/sites-enabled structure that dates back a while copied in because I have multiple domains and subdomains. But do let me know what configuration bits I need to post. Here's what I'm seeing and can't see what to do about: [root@m0404 conf.d]# apachectl -t httpd: Syntax error on line 56 of /etc/httpd/conf/httpd.conf: Syntax error on line 1 of /etc/httpd/conf.modules.d/00-ssl.conf: Cannot load modules/mod_ssl.so into server: /etc/httpd/modules/mod_ssl.so: undefined symbol: unixd_config What now? Thanks! -- David Benfell <benfell(a)parts-unknown.org> -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

1 0

19->20: now NM won't set static address
by sean darcy 11 Apr '14

11 Apr '14

I've just upgraded to 20. I have a multihomed machine, two interfaces - "external" and "internal". external uses dhcp, internal has a static address. But NM doesn't honor the static address, and uses dhcp on internal. The same setup worked in 19. cat ifcfg-internal # Please read /usr/share/doc/initscripts-*/sysconfig.txt # for the documentation of these parameters. BOOTPROTO=none DEVICE=internal TYPE=Ethernet IPV6INIT=no ONBOOT=yes USERCTL=no IPADDR=10.10.11.251 PREFIX=24 DEFROUTE=no IPV4_FAILURE_FATAL=no NAME="System CableMatters_USB_2(internal)" NM reads the file: NetworkManager[2355]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-internal ... NetworkManager[2355]: ifcfg-rh: read connection 'System CableMatters_USB_2(internal)' but still calls dhclient: NetworkManager: DHCPDISCOVER on internal to 255.255.255.255 port 67 interval 3 (xid=0x360c001) dhclient[2647]: DHCPDISCOVER on internal to 255.255.255.255 port 67 interval 8 (xid=0x360c001) I've now disabled NM, and set it up manually. What's changed in 20 that breaks this? sean

2 7

F20: HDMI + Win+P == GDM black screen
by Pedro Francisco 11 Apr '14

11 Apr '14

So, I've used HDMI for the first time this weekend. I have pressed Win+P a few times which resulted in a black screen (turned off, I guess). Suspending and resuming would turn on the internal monitor again (I had the session running so it was easy). But now, after a warm reboot, my GDM is a black screen. Inputting the password appears to login on the session. Since this is a GDM issue, I need to find out where GDM stores it's monitor settings -- gconftool-2 recursive-unset on the user-side didn't work. So, questions: a) where does GDM store its monitor settings? b) what is going on here: b1) is there a bug report? b2) any tips on what words to use on the bug report and on what component to assign? Hardware: 8086:0416 (Intel HD Graphics 4600 -- HDMI should be connected to this one, since NVIDIA is always off on Linux) 10DE:0FE4 (NVIDIA GeForce GT 750M -- always disabled on boot via manual call on rc.local to bbswitch ) Software: up-to-date Fedora 20. Thanks in Advance, -- Pedro

2 3

set NTP servers in Date & Time settings?
by patrick korsnick 11 Apr '14

11 Apr '14

Hi all, Does anyone know if Gnome3 did away with the ability to set your NTP servers in the Date and Time control panel? I remember you used to be able to do this, but can't remember if it was on Gnome2xx or was a feature that originally existed in Gnome3 on fedora. Thanks!

2 1

nvidia driver on fedora 20 / GTX460M
by Rafnews 11 Apr '14

11 Apr '14

Hi, after i followed the tutorial from http://www.if-not-true-then-false.com/2014/fedora-20-nvidia-guide/ about installing nVidia driver for my ASUS G73SW laptop (with a GTX460M nvidia card), i'm getting blocked at boot time of fedora 20. i used this configuration (without nvidia driver) for 2 weeks without any problem. and now when it loads Fedora, it stops at different steps: 1. Starting Network Manager Script Dispatcher Service or 2. Started Hostname Service or 3. ASAHI mDNS/DNS-SD Stack in fact it is randomly... :( but it seems everytime just after GNOME Desktop initialisation. i chose kmod as suggested in the tutorial for a better kernel update later on. so what is the problem ? can i get back to working status ? at boot time i selected previous working kernel but it stops anyway. thx for help. A.

4 7

Frustrating upgraded behaviour
by Ambrogio De Lorenzo 10 Apr '14

10 Apr '14

Hi all, I'm a little frustrated. In Fedora 20, updated, with the new kernel my udev rule for eth0 is no more working. Booting with old kernel it's ok. As I have a lot of VM that point to eth0, I'm booting with the old kernel. But with the old kernel LibreOffice is hanging on start. It starts only if I open a File already created. If I try to open Calc or Writer, it hangs opening it. The only way is to kill them. What is appening. Bye Ambrogio

5 13

Libreoffice issues after last libreoffice update
by CS DBA 10 Apr '14

10 Apr '14

Running F20 and KDE, updated libre office. Now if I open by clicking on libre office writer I get a window outline with the background from my desktop in the window, it's not quite a transparent window cause if I move it the portion of the desktop background moves with it... It never comes back... If iI click on the close window icon then after about 30seconds I get the KDE message that the app is not responding asking me to choose from 'terminate' or 'wait longer' However if I navigate via Dolphin to an existing open office file (and I do not currently have a broken window as described above running) then it opens immediately as expected Thoughts?

3 2

Clamav tell's me rkhunter is a worm!
by Frank Murphy 10 Apr '14

10 Apr '14

/usr/bin/rkhunter: Osx.Worm.Inqtana-3 FOUND /usr/bin/rkhunter: moved to '/var/cache/clam/rkhunter.001' rkhunter-1.4.2-2.fc20.noarch Rkhunter was updated to this during the week, ___ Regards Frank frankly3d.com

3 3

fedup 19=>20 hangs: selinux
by sean darcy 10 Apr '14

10 Apr '14

Trying to upgrade F19 to F20 using fedup. On the upgrade reboot it hangs: ............ Reached target Initrd Default Target systemd-journal1d166]: Received SIGTERM systemd[1]: Failed to initialize SELinux context: no such file or directory selinux is set to permissive. F19 works fine. I suppose I could set selinux=0 , but then none of the contexts would be set. Correct? sean

3 7

Forcing telnet to use IPv6
by Robert Moskowitz 10 Apr '14

10 Apr '14

Many howtos I find for Telnet and IPv6 say to use the '-6' option. Well no such option exists in the Fedora telnet client. I know if the host is ONLY accessable via v6, Telnet will use v6. But how do I force the client when the server is listening on both stacks?

2 2

← Newer
1
...
10
11
12
13
14
15
16
17
18
Older →

Jump to page: