Using mrtg to monitor cable modem utilization
by Alex
[first time went without a subject somehow...]
Hi,
Anyone still using mrtg these days? I'm trying to set up mrtg on my
fedora25 system connected to a cable modem (35Mbit up, 5Mbit down) on
one side and a gigabit ethernet on the other and can't figure out how
to reflect that in the config file.
Maybe you have an idea for monitoring utilization using another method?
I'm trying to set it up to determine utilization, so it's important to
define the upper bound for both upload and download. Is this possible?
If I recall, isn't there a way to define input max and output max?
I've run the following cfgmaker command:
# cfgmaker --ifref=descr --ifdesc=alias -zero-speed=5000000
mysnmppass(a)orion.example.com
Here is the ifconfig output for my system. I've also included the
generated cfgmaker output (with 'example' as my domain) below. I don't
understand why it's defined eth0 and eth1 as 125MBit when it's
connected to a bridge on a gigabit network, and why it's chosen
625kbit for br0 when I've tried to define it as 5Mbit.
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 68.111.193.42 netmask 255.255.255.248 broadcast 68.111.193.47
inet6 fe80::ec4:7aff:fea9:18de prefixlen 64 scopeid 0x20<link>
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
RX packets 5891321629 bytes 2564661840218 (2.3 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3670532823 bytes 22827372375556 (20.7 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
br0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 68.111.193.44 netmask 255.255.255.248 broadcast 68.111.193.47
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
RX packets 6303244831 bytes 2755299573703 (2.5 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18098110833 bytes 24060466118480 (21.8 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb120000-fb13ffff
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::ec4:7aff:fea9:18df prefixlen 64 scopeid 0x20<link>
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
RX packets 22104249713 bytes 13271044125506 (12.0 TiB)
RX errors 0 dropped 0 overruns 44 frame 0
TX packets 16730830652 bytes 3413227489426 (3.1 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb100000-fb11ffff
eth1:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.6.1 netmask 255.255.255.0 broadcast 192.168.6.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.101 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 55198240 bytes 9250184967 (8.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 55198240 bytes 9250184967 (8.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:63:b9:2a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:fe35:dd67 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:35:dd:67 txqueuelen 1000 (Ethernet)
RX packets 174594324 bytes 160713095174 (149.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 200965168 bytes 104887504535 (97.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:fe35:dd66 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:35:dd:66 txqueuelen 1000 (Ethernet)
RX packets 16552006 bytes 139318192739 (129.7 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 30615686 bytes 3092083364 (2.8 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Here is the mrtg.cfg with the disabled interfaces and unnecessary HTML
removed. I've also included the cfgmaker snmp info below.
EnableIPv6: no
Target[orion.example.com_eth0]: \eth0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_eth0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="eth0"
MaxBytes[orion.example.com_eth0]: 125000000
Title[orion.example.com_eth0]: eth0 -- orion.inside.example.com
PageTop[orion.example.com_eth0]: <h1>eth0 -- orion.inside.example.com</h1>
Target[orion.example.com_eth1]: \eth1:mysnmppass@orion.example.com:
SetEnv[orion.example.com_eth1]: MRTG_INT_IP="192.168.6.1" MRTG_INT_DESCR="eth1"
MaxBytes[orion.example.com_eth1]: 125000000
Title[orion.example.com_eth1]: eth1 -- orion.inside.example.com
PageTop[orion.example.com_eth1]: <h1>eth1 -- orion.inside.example.com</h1>
Target[orion.example.com_br0]: \br0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_br0]: MRTG_INT_IP="68.111.193.42" MRTG_INT_DESCR="br0"
MaxBytes[orion.example.com_br0]: 625000
Title[orion.example.com_br0]: br0 -- orion.inside.example.com
PageTop[orion.example.com_br0]: <h1>br0 -- orion.inside.example.com</h1>
Target[orion.example.com_vnet0]: \vnet0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_vnet0]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="vnet0"
MaxBytes[orion.example.com_vnet0]: 1250000
Title[orion.example.com_vnet0]: vnet0 -- orion.inside.example.com
PageTop[orion.example.com_vnet0]: <h1>vnet0 -- orion.inside.example.com</h1>
Target[orion.example.com_vnet1]: \vnet1:mysnmppass@orion.example.com:
SetEnv[orion.example.com_vnet1]: MRTG_INT_IP="No Ip" MRTG_INT_DESCR="vnet1"
MaxBytes[orion.example.com_vnet1]: 1250000
Title[orion.example.com_vnet1]: vnet1 -- orion.inside.example.com
PageTop[orion.example.com_vnet1]: <h1>vnet1 -- orion.inside.example.com</h1>
--base: Get Device Info on mysnmppass(a)orion.example.com:
--base: Vendor Id: Unknown Vendor - 1.3.6.1.4.1.8072.3.2.10
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifIndex = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifIndex = 2
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifIndex = 3
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifIndex = 4
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifIndex = 5
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifIndex = 6
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifIndex = 7
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifIndex = 8
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifIndex = 9
--base: Walking ifType
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifType = 24
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifType = 131
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifType = 6
--base: Walking ifAdminStatus
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifAdminStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifAdminStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifAdminStatus = 1
--base: Walking ifOperStatus
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifOperStatus = 1
--base: Walking ifMtu
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifMtu = 65536
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifMtu = 1332
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifMtu = 1500
--base: Walking ifSpeed
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifSpeed = 1000000000
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifSpeed = 1000000000
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifSpeed = 10000000
6 years, 10 months
Wammu questions
by JD
On a machine which has installed
gammu-libs
dialog
gammu
python-gammu
wammu
wammu configure (using automatic detection) is unable to find a
connected phone,
even though, when I plug in the usb cable, I get a popup on the screen
of the
gnome directory browser of the phone's storage.
So, how do I proceed from here?
Thax to all wammu users for any help with this.
6 years, 10 months
Seem to have screwed my F25......
by DB
Evening all,
I thought it would be a Good Idea to "improve" my Fedora system if I
added an SDD.
I put it in, plugged it in & it seemed to work - sort of....
What I now have is a selection window from grub which has 2 new versions
of F25 Workstation (on sda), then an F19, also on sda, followed by the
F25 on sdb (my SDD).
What I would like to do is to remove the 2 new F25s because the one was
only stated to allow me to boot the system; remove the F19 & put F25 on
sdb as the default. I hope that doing something like this would mean
that (system) updates would be applied to the SDD F25, and that I would
be able to access all the software I have on /home......
Does anyone have any ideas how I might be able to do this???
Would I need to change any of my SATA cables to make sdb into sda???
Many thanks for any suggestions!!!!!
Dave
6 years, 10 months
2 mice: left & right handed
by andrea
Hi,
running F25 GNOME on Wayland and have 2 mice.
One on the left and one on the right of the keyboard.
I would like to set the left as left handed and the right as right handed.
In GNOME settings I cannot change it per mouse, rather for all of the at the same time.
I read that this is a libinput matter, but I cannot find how to do it.
Any suggestions?
Andrea
6 years, 10 months
Modern webmail client
by Alex
Hi, we have fedora25 set up with apache and dovecot and have been
using squirrelmail. We're looking to replace squirrelmail with
something more modern and "responsive" on mobile.
Before I start installing and testing roundcube, rainloop, and the
others, I thought I would ask this list if they have a preference for
users on mobile?
I've searched for an updated review of all the main players these
days, but the most recent appears to be from 2015.
Thanks,
Alex
6 years, 10 months
RE: Modern webmail client
by J.Witvliet＠mindef.nl
Some {free) WIFI-providers block much else besides 80 & 443.
That’s the only sensible reason for using webnail.
-----Original Message-----
From: Tom Horsley [mailto:horsley1953@gmail.com]
Sent: dinsdag 6 juni 2017 21:37
To: users(a)lists.fedoraproject.org
Subject: Re: Modern webmail client
On Tue, 6 Jun 2017 15:27:51 -0400
Alex wrote:
> > Why wouldn't you just use an IMAP client on the phone?
>
> Yes, I agree, and that's what I've asked them to do, but they still
> prefer the webmail client.
Then that means they prefer squirrelmail, right? So you might as well keep using it or they'll hate the replacement just as irrationally :-).
_______________________________________________
users mailing list -- users(a)lists.fedoraproject.org To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten.
This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
6 years, 10 months
VPN l2tp+ipsec: not work with last kernel 4.11.3-200
by Dario Lesca
Yesterday I have update my fedora 25 and after reboot VPN l2tp+ipsec do
not work anymore.
The connection happens without problem, the routing are set correctly,
the DNS (UDP protocol) and ping (ICMP protocol) to remote host work.
Only the access to some server, like ssh or smb:// (TCP protocol) do
not work, in this case, if I monitoring on remote server with tcpdump,
none arrives.
If I reboot with previous kernel (4.10.17) all work fine.
Some suggest?
Many thanks
--
Dario Lesca
(inviato dal mio Linux Fedora 25 Workstation)
6 years, 10 months
Difficulties at very first steps with f25kde ...
by Walter H.
Hello,
my older computer is a Core2Quad with 4 GB RAM had a hard disk with a
Windows 10
what I did:
- I plugged this harddisk as harddisk 2 and added an empty harddisk as
harddisk 1
- I downloaded Fedora 25 KDE (Fedora-KDE-Live-x86_64-25-1.3.iso) and
burnt this to a DVD
- I installed this onto harddisk 1, the boot menu entry for the 2nd
harddisk with Windows 10 was added automatically
I gave fixed IPv4 (an RFC1918 addr) and IPv6 (my HE tunnel
range) addresses
- after the first login I had to enable sshd - why isn't this
automatically? - with
systemctl enable sshd
systemctl start sshd
now I could do SSH from my newer computer (Windows)
- I did an yum update and this updated more than 800 packages and
downloaded nearly 1 GByte
after this I rebootet
- I successfully installed postfix as MTA and logwatch, works as
expected - why is the logwatch mail 'precedence bulk'?
- I also needed the graphical connection and found this:
https://www.server-world.info/en/note?os=Fedora_24&p=desktop&f=7
there I have a strange phenomen
after the connection with mstsc, I get a window where I can select
between Xvnc and Xorg, when selecting Xvnc and entering userid and
password
the window is closed and session blown away ...
when I select Xorg and enter userid and password the window stays
'green' forever
/var/log/xrdp.log shows this:
[20170604-21:40:08] [INFO ] starting xrdp with pid 1406
[20170604-21:40:10] [INFO ] listening to port 3389 on 0.0.0.0
[20170604-21:42:07] [INFO ] Socket 12: AF_INET connection received from 172.23.2.7 port 4333
[20170604-21:42:07] [DEBUG] Closed socket 12 (AF_INET 172.23.1.7:3389)
[20170604-21:42:07] [DEBUG] Closed socket 11 (AF_INET 0.0.0.0:3389)
[20170604-21:42:07] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
[20170604-21:42:07] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
[20170604-21:42:07] [DEBUG] TLSv1.2 enabled
[20170604-21:42:07] [DEBUG] TLSv1.1 enabled
[20170604-21:42:07] [DEBUG] TLSv1 enabled
[20170604-21:42:07] [DEBUG] Security layer: requested 1, selected 1
[20170604-21:42:07] [INFO ] connected client computer name: XP64WALDI01-W01
[20170604-21:42:07] [INFO ] TLS connection established from 172.23.2.7 port 4333: TLSv1 with cipher DES-CBC3-SHA
[20170604-21:42:07] [DEBUG] xrdp_00000604_wm_login_mode_event_00000001
[20170604-21:42:07] [INFO ] Cannot find keymap file /etc/xrdp/km-00020409.ini
[20170604-21:42:07] [INFO ] Loading keymap file /etc/xrdp/km-00000409.ini
[20170604-21:42:07] [WARN ] local keymap file for 0x00020409 found and doesn't match built in keymap, using local keymap file
[20170604-21:42:16] [DEBUG] xrdp_wm_log_msg: connecting to sesman ip 127.0.0.1 port 3350
[20170604-21:42:17] [INFO ] xrdp_wm_log_msg: sesman connect ok
[20170604-21:42:17] [DEBUG] xrdp_wm_log_msg: sending login info to session manager, please wait...
[20170604-21:42:17] [DEBUG] return value from xrdp_mm_connect 0
[20170604-21:42:17] [INFO ] xrdp_wm_log_msg: login successful for display 10
[20170604-21:42:17] [DEBUG] xrdp_wm_log_msg: VNC started connecting
[20170604-21:42:18] [DEBUG] xrdp_wm_log_msg: VNC connecting to 127.0.0.1 5910
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC tcp connected
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC security level is 2 (1 = none, 2 = standard)
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC password ok
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC sending share flag
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving server init
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving pixel format
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving name length
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC receiving name
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC sending pixel format
[20170604-21:42:20] [DEBUG] xrdp_wm_log_msg: VNC sending encodings
[20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: VNC sending framebuffer update request
[20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: VNC sending cursor
[20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: VNC connection complete, connected ok
[20170604-21:42:21] [INFO ] The following channel is allowed: rdpdr (0)
[20170604-21:42:21] [INFO ] The following channel is allowed: rdpsnd (1)
[20170604-21:42:21] [INFO ] The following channel is allowed: drdynvc (2)
[20170604-21:42:21] [INFO ] The following channel is allowed: cliprdr (3)
[20170604-21:42:21] [DEBUG] The allow channel list now initialized for this session
[20170604-21:42:21] [DEBUG] xrdp_wm_log_msg: connected ok
[20170604-21:42:21] [DEBUG] xrdp_mm_connect_chansrv: chansrv connect successful
[20170604-21:42:21] [DEBUG] Closed socket 18 (AF_INET 127.0.0.1:55588)
[20170604-21:42:22] [DEBUG] VNC got clip data
[20170604-21:42:22] [DEBUG] Closed socket 12 (AF_INET 172.23.1.7:3389)
[20170604-21:42:22] [DEBUG] xrdp_mm_module_cleanup
[20170604-21:42:22] [DEBUG] VNC mod_exit
[20170604-21:42:23] [DEBUG] Closed socket 19 (AF_INET 127.0.0.1:57730)
[20170604-21:42:23] [DEBUG] Closed socket 20 (AF_UNIX)
[20170604-21:42:23] [ERROR] Listening socket is in wrong state, terminating listener
[20170604-21:42:23] [CORE ] shutting down log subsystem...
/var/log/xrdp-sesman.log shows this:
[20170604-21:40:08] [DEBUG] libscp initialized
[20170604-21:40:09] [INFO ] starting xrdp-sesman with pid 1405
[20170604-21:40:10] [INFO ] listening to port 3350 on 127.0.0.1
[20170604-21:42:16] [INFO ] A connection received from 127.0.0.1 port 55588
[20170604-21:42:17] [INFO ] ++ created session (access granted): username walter, ip 172.23.2.7:4333 - socket: 12
[20170604-21:42:17] [INFO ] starting Xvnc session...
[20170604-21:42:17] [DEBUG] Closed socket 9 (AF_INET 0.0.0.0:5910)
[20170604-21:42:17] [DEBUG] Closed socket 9 (AF_INET 0.0.0.0:6010)
[20170604-21:42:17] [DEBUG] Closed socket 9 (AF_INET 0.0.0.0:6210)
[20170604-21:42:17] [DEBUG] Closed socket 8 (AF_INET 127.0.0.1:3350)
[20170604-21:42:17] [DEBUG] Closed socket 7 (AF_INET 127.0.0.1:3350)
[20170604-21:42:17] [DEBUG] Closed socket 8 (AF_INET 127.0.0.1:3350)
[20170604-21:42:18] [INFO ] Xvnc :10 -auth .Xauthority -geometry 1600x1200 -depth 32 -rfbauth/home/walter/.vnc/sesman_walter_passwd:10 -bs -nolisten tcp -localhost -dpi 96
[20170604-21:42:18] [CORE ] waiting for window manager (pid 1552) to exit
the 1600x1200 is a little bit bigger as the monitor of the older
computer itself, the newer has a 2560x1440
/etc/xrdp/sesman.ini has some weird content
[Xvnc]
param=Xvnc
param=-bs
param=-nolisten
param=tcp
param=-localhost
param=-dpi
param=96
[Xorg]
param=Xorg
param=-config
param=xrdp/xorg.conf
param=-noreset
param=-nolisten
param=tcp
param=-logfile
param=.xorgxrdp.%s.log
shouldn't this look like
[Xvnc]
param=-bs
param=-nolisten tcp
param=-localhost
param=-dpi 96
[Xorg]
param=-config xrdp/xorg.conf
param=-noreset
param=-nolisten tcp
param=-logfile .xorgxrdp.%s.log
the next strange thing in connection with firefox ...
when setting a proxy with DNS name, I get errors, that the proxy is not
found;
entering the IPv4 or IPv6 address this works ...
(entering host proxy.local it gives the IPv4 and IPv6 address - my
DNS is working properly)
Thanks for help or some explanation
Walter
6 years, 10 months
Dependency failed for session? WTF?
by Tom Horsley
Anyone know what this gibberish that shows up in my
logwatch means?
Dependency failed for Session 10084 of user nvtest.: 1 Time(s)
Dependency failed for Session 10363 of user nvtest.: 1 Time(s)
...
Dependency failed for User Manager for UID 25130.: 59 Time(s)
session-10084.scope: Job session-10084.scope/start failed with result 'dependency'.: 1 Time(s)
session-10363.scope: Job session-10363.scope/start failed with result 'dependency'.: 1 Time(s)
...
user-25130.slice: Start request repeated too quickly.: 118 Time(s)
user(a)25130.service: Failed at step CGROUP spawning /usr/lib/systemd/systemd: No such file or directory: 196 Time(s)
user(a)25130.service: Job user(a)25130.service/start failed with result 'dependency'.: 59 Time(s)
Notes: User nvtest is UID 25130
tomh> ls -l /usr/lib/systemd/systemd
-rwxr-xr-x 1 root root 1641008 Feb 7 08:05 /usr/lib/systemd/systemd*
The CGROUP error makes no sense because /usr/lib/systemd/systemd clearly
does exist.
User nvtest is used to run testbeds via ssh, all those errors almost
certainly happened when a test run was using my system as a remote
test target and logging in via ssh for each individual test to run
a specific remote program (not a normal shell, though that remote
program usually starts a shell).
Meanwhile, despite all these silly errors in the log, the actual
test run appeared to work fine.
What new nonsense hath systemd wrought?
6 years, 10 months
