mmc0: error -110 whilst initialising SD card
by Frédéric
Hi,
When I plug my new 64Gb SDXC card, I get this in dmesg:
mmc0: error -110 whilst initialising SD card
I have fuse, fuse-exfat and exfat-utils installed. I am using F28 on x86_64.
Works well with 8Gb SDHC.
Thanks,
F
5 years, 6 months
gnuplot 5.2
by Patrick Dupre
Hello,
Could update the gnuplot package in fedora 28?
In addition, could you compile it with the cerf library?
Thank
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
5 years, 6 months
Increasingly frequent problem with: "Unexpected system error";
kernel-core; 4.16.15-300.fc28.x86_64; cannot be reported - related to Chrome
and probably YouTube
by Philip Rhoades
People,
"The backtrace does not contain enough meaningful function frames to be
reported. It is annoying but it does not necessary signalize a problem
with your computer. ABRT will not allow you to create a report in a bug
tracking system but you can contact kernel maintainers via e-mail."
For a long time I have been in the habit of overworking Chrome (eg quite
frequently a dozen windows open with hundreds of tabs) but a little
while ago, instead of just slowly grinding the system to a halt, these
crashes started happening - and then more frequently - now it is up to a
couple of times a day before I can even get anywhere near to my usual
practice of overloading. I haven't cleaned out histories or other stuff
out of Chrome yet but I think my hardware should be up to handling a
decent load but there is obviously something wrong . . and getting worse
. .
My gear:
Chrome: Version 69.0.3497.100 (Official Build) (64-bit)
See attached txt file for complete HW.
Any suggestions about how to debug this problem would be appreciated.
Regards,
Phil.
--
Philip Rhoades
PO Box 896
Cowra NSW 2794
Australia
E-mail: phil(a)pricom.com.au
5 years, 6 months
DNF versionlock is ignored.
by Sudhir Khanger
I am not sure what happened but I had locked the update of geoclue2 via dnf versionlock but it has been updated anyway.
$ dnf list installed | grep -ie geoclue2
geoclue2.x86_64 2.4.11-1.fc28 @updates
$ cat /etc/dnf/plugins/versionlock.list
# Added locks on Tue Jul 10 16:14:01 2018
geoclue2-0:2.4.8-1.fc28.*
5 years, 6 months
Hard drive to sleep
by Patrick Dupre
Hello,
Is it safe to put a hard drive on sleep?
I will have to wake it up, later.
(I need to minimize the power consumption during a period of time)
Thank.
/dev/sdb:
ATA device, with non-removable media
Model Number: HGST HTS721010A9E630
Serial Number: JS100X620ES1ZS
Firmware Revision: JB0OA3J0
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
Used: unknown (minor revision code 0x0028)
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1953525168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 953869 MBytes
device size with M = 1000*1000: 1000204 MBytes (1000 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: 7200
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
Non-Zero buffer offsets in DMA Setup FIS
* DMA Setup Auto-Activate optimization
* Device-initiated interface power management
In-order data delivery
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
168min for SECURITY ERASE UNIT. 170min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000cca836c63f67
NAA : 5
IEEE OUI : 000cca
Unique ID : 836c63f67
Checksum: correct
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
5 years, 6 months
No "su" / Admin account in Fedora 29?
by Eddie G. O'Connor Jr.
Hello all, I was just wondering how to go about creating the "su" /
admin account for F-29? I installed the beta and it only created the
main user,...I'm almost certain that in F-28 there was an option upon
install to create the admin/root account? I didn't see it in the beta,
is it gone? is there now a new process? Just curious is all.....
Thank In Advance
EGO II
5 years, 6 months
Problem connecting a USB HD dock
by GianPiero Puccioni
Hi,
I have two Manhattan "SATA Quick Dock" that I use for backup on HD and I used
them without any problem before many times, but yesterday I tried and they are
not seen anymore. When I connect the USB there is no reaction and "dmesg"
doesn't show any attempt to connect to it, this on two machines (one F27 the
other F28).
The USB port seems fine as I can connect a memory stick, and the docking
stations and HD are working as one of the machine has an e-SATA port and I can
connect the dock and use the HD using that. I tried different cables too, but
nothing happens.
Was there any recent change (last time it worked was, I think, in May or June)
in the USB device driver that can prevent the connection? Some settings to
change?
Thanks for any help,
G
--
GianPiero Puccioni |Istituto dei Sistemi Complessi-CNR
gianpiero.puccioni(a)isc.cnr.it |Via Madonna del Piano, 10
T:+39 0555226682 F:+39 0555226683|50019 Sesto F. (Firenze) ITALY
5 years, 6 months
FC28: How do I get Vulkan working on intel laptop ?
by sean darcy
Running Fedora 28 on Intel i5 8250U, UHD Graphics 620 (rev 07). Vulkan
is supposed to be supported.
mesa-vulkan-drivers-18.0.5-4.fc28.x86_64
vulkan-loader-1.1.77.0-4.fc28.x86_64
vulkan-tools-1.1.77.0-1.fc28.x86_64
But...
export VK_LOADER_DEBUG=all
vulkaninfo
DEBUG: Searching the following paths for manifest files:
/etc/xdg/vulkan/implicit_layer.d:/etc/vulkan/implicit_layer.d:/usr/local/share/vulkan/implicit_layer.d:/usr/share/vulkan/implicit_layer.d
DEBUG: Searching the following path for manifest files:
/root/.local/share/vulkan/implicit_layer.d
===========
VULKAN INFO
===========
Vulkan Instance Version: 1.1.77
.................
INFO: Found ICD manifest file
/usr/share/vulkan/icd.d/intel_icd.x86_64.json, version "1.0.0"
DEBUG: Searching for ICD drivers named /usr/lib64/libvulkan_intel.so,
using default dir
INFO: Found ICD manifest file
/usr/share/vulkan/icd.d/radeon_icd.x86_64.json, version "1.0.0"
DEBUG: Searching for ICD drivers named /usr/lib64/libvulkan_radeon.so,
using default dir
DEBUG: Build ICD instance extension list
DEBUG: Instance Extension: VK_KHR_external_fence_capabilities
(/usr/lib64/libvulkan_intel.so) version 0.0.1
DEBUG: Instance Extension: VK_KHR_external_memory_capabilities
(/usr/lib64/libvulkan_intel.so) version 0.0.1
.........
ERROR: setupLoaderTermPhysDevs: Failed to detect any valid GPUs in the
current config
ERROR: setupLoaderTrampPhysDevs: Failed during dispatch call of
'vkEnumeratePhysicalDevices' to lower layers or loader to get count.
vulkaninfo/vulkaninfo.c:3214: failed with VK_ERROR_INITIALIZATION_FAILED
glx works:
glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
.........
Extended renderer info (GLX_MESA_query_renderer):
Vendor: VMware, Inc. (0xffffffff)
Device: llvmpipe (LLVM 6.0, 256 bits) (0xffffffff)
Version: 18.0.5
Accelerated: no
Video memory: 7849MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 3.3
Max compat profile version: 3.0
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.0
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: llvmpipe (LLVM 6.0, 256 bits)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 18.0.5
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
..........
Any help appreciated.
5 years, 6 months