users December 2018

users@lists.fedoraproject.org

100 participants
110 discussions

Shell script startup strangeness
by Robert McBroom 15 Dec '18

15 Dec '18

In f27 there were a few lines before a script would execute. Now in f29 they go on and on and on. Saw a message about a setting that would control the clutter but I can't remember where. Here is the hash-- sh -v ./goboy1.sh & $ module () { _module_raw "$@" 2>&1 } _module_raw () { unset _mlshdbg; if [ "${MODULES_SILENT_SHELL_DEBUG:-0}" = '1' ]; then case "$-" in *v*x*) set +vx; _mlshdbg='vx' ;; *v*) set +v; _mlshdbg='v' ;; *x*) set +x; _mlshdbg='x' ;; *) _mlshdbg='' ;; esac; fi; unset _mlre _mlIFS; if [ -n "${IFS+x}" ]; then _mlIFS=$IFS; fi; IFS=' '; for _mlv in ${MODULES_RUN_QUARANTINE:-}; do if [ "${_mlv}" = "${_mlv##*[!A-Za-z0-9_]}" -a "${_mlv}" = "${_mlv#[0-9]}" ]; then if [ -n "`eval 'echo ${'$_mlv'+x}'`" ]; then _mlre="${_mlre:-}${_mlv}_modquar='`eval 'echo ${'$_mlv'}'`' "; fi; _mlrv="MODULES_RUNENV_${_mlv}"; _mlre="${_mlre:-}${_mlv}='`eval 'echo ${'$_mlrv':-}'`' "; fi; done; if [ -n "${_mlre:-}" ]; then eval `eval ${_mlre}/usr/bin/tclsh /usr/share/Modules/libexec/modulecmd.tcl bash '"$@"'`; else eval `/usr/bin/tclsh /usr/share/Modules/libexec/modulecmd.tcl bash "$@"`; fi; _mlstatus=$?; if [ -n "${_mlIFS+x}" ]; then IFS=$_mlIFS; else unset IFS; fi; unset _mlre _mlv _mlrv _mlIFS; if [ -n "${_mlshdbg:-}" ]; then set -$_mlshdbg; fi; unset _mlshdbg; return $_mlstatus } switchml () { typeset swfound=1; if [ "${MODULES_USE_COMPAT_VERSION:-0}" = '1' ]; then typeset swname='main'; if [ -e /usr/share/Modules/libexec/modulecmd.tcl ]; then typeset swfound=0; unset MODULES_USE_COMPAT_VERSION; fi; else typeset swname='compatibility'; if [ -e /usr/share/Modules/libexec/modulecmd-compat ]; then typeset swfound=0; MODULES_USE_COMPAT_VERSION=1; export MODULES_USE_COMPAT_VERSION; fi; fi; if [ $swfound -eq 0 ]; then echo "Switching to Modules $swname version"; source /usr/share/Modules/init/bash; else echo "Cannot switch to Modules $swname version, command not found"; return 1; fi } #!/bin/bash cd /home/rm3/2.54/30cm/52- mcnp6.sh 52-plx0.95 52-mas10.62a.s ./goboy1.sh: /usr/local/bin/mcnp6.sh: /bin/ksh: bad interpreter: No such file or directory mcnp6.sh 52-plx0.95a 52-plx0.95.s ./goboy1.sh: /usr/local/bin/mcnp6.sh: /bin/ksh: bad interpreter: No such file or directory mcnp6.sh 52-plx0.95b 52-plx0.95a.s ./goboy1.sh: /usr/local/bin/mcnp6.sh: /bin/ksh: bad interpreter: No such file or directory exit sh -v ./goboy1.sh & [2] 20077 [1] Exit 126 sh -v ./goboy1.sh [rm3@RobertPC ~]$ module () { _module_raw "$@" 2>&1 } _module_raw () { unset _mlshdbg; if [ "${MODULES_SILENT_SHELL_DEBUG:-0}" = '1' ]; then case "$-" in *v*x*) set +vx; _mlshdbg='vx' ;; *v*) set +v; _mlshdbg='v' ;; *x*) set +x; _mlshdbg='x' ;; *) _mlshdbg='' ;; esac; fi; unset _mlre _mlIFS; if [ -n "${IFS+x}" ]; then _mlIFS=$IFS; fi; IFS=' '; for _mlv in ${MODULES_RUN_QUARANTINE:-}; do if [ "${_mlv}" = "${_mlv##*[!A-Za-z0-9_]}" -a "${_mlv}" = "${_mlv#[0-9]}" ]; then if [ -n "`eval 'echo ${'$_mlv'+x}'`" ]; then _mlre="${_mlre:-}${_mlv}_modquar='`eval 'echo ${'$_mlv'}'`' "; fi; _mlrv="MODULES_RUNENV_${_mlv}"; _mlre="${_mlre:-}${_mlv}='`eval 'echo ${'$_mlrv':-}'`' "; fi; done; if [ -n "${_mlre:-}" ]; then eval `eval ${_mlre}/usr/bin/tclsh /usr/share/Modules/libexec/modulecmd.tcl bash '"$@"'`; else eval `/usr/bin/tclsh /usr/share/Modules/libexec/modulecmd.tcl bash "$@"`; fi; _mlstatus=$?; if [ -n "${_mlIFS+x}" ]; then IFS=$_mlIFS; else unset IFS; fi; unset _mlre _mlv _mlrv _mlIFS; if [ -n "${_mlshdbg:-}" ]; then set -$_mlshdbg; fi; unset _mlshdbg; return $_mlstatus } switchml () { typeset swfound=1; if [ "${MODULES_USE_COMPAT_VERSION:-0}" = '1' ]; then typeset swname='main'; if [ -e /usr/share/Modules/libexec/modulecmd.tcl ]; then typeset swfound=0; unset MODULES_USE_COMPAT_VERSION; fi; else typeset swname='compatibility'; if [ -e /usr/share/Modules/libexec/modulecmd-compat ]; then typeset swfound=0; MODULES_USE_COMPAT_VERSION=1; export MODULES_USE_COMPAT_VERSION; fi; fi; if [ $swfound -eq 0 ]; then echo "Switching to Modules $swname version"; source /usr/share/Modules/init/bash; else echo "Cannot switch to Modules $swname version, command not found"; return 1; fi } #!/bin/bash Finally my code can run. What gives? Robert

3 2

darktable and opencl on f29
by François Patte 15 Dec '18

15 Dec '18

Bonjour, I try to have opencl working with darktable on my f29 system but it fails. As far as I know, everything suitable is installed on this system and opencl used to work on f28 with this stuff: xorg-x11-drv-nvidia-libs-410.78-1.fc29.x86_64 xorg-x11-drv-nvidia-libs-410.78-1.fc29.i686 nvidia-settings-410.78-1.fc29.x86_64 xorg-x11-drv-nvidia-cuda-libs-410.78-1.fc29.x86_64 nvidia-modprobe-410.79-1.fc27.x86_64 kmod-nvidia-4.19.6-300.fc29.x86_64-410.78-1.fc29.x86_64 akmod-nvidia-410.78-1.fc29.x86_64 xorg-x11-drv-nvidia-kmodsrc-410.78-1.fc29.x86_64 kmod-nvidia-4.19.5-300.fc29.x86_64-410.78-1.fc29.x86_64 xorg-x11-drv-nvidia-410.78-1.fc29.x86_64 libvdpau-1.1.1-10.fc29.x86_64 libvdpau-1.1.1-10.fc29.i686 libva-vdpau-driver-0.7.4-22.fc29.x86_64 vdpauinfo-1.0-10.fc29.x86_64 Graphic card is NVIDIA GeForce GTX 1050 Ti Do I have to install some cuda stuff from cuda repo? Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte

2 1

Weird volume issues (PulseAudio?)
by Christopher 15 Dec '18

15 Dec '18

Okay, so this has been bugging me for a while now, but I'm not sure how to fix it, or to troubleshoot it further. Maybe somebody here can help. There are two issues, and they may or may not be related. I'm currently on F29, but it happened before I upgraded, too. 1. In gdm, the volume indicator always indicates the output device is Headphones, even when headphones aren't plugged in. gdm doesn't make a lot of noise to debug before logging in, so I'm not sure if it's trying to play through the wrong device, or if it's a UI problem. 2. When I log in (I'm using Wayland), everything works fine for about 10 seconds. After that, the volume is automatically muted and I have to manually unmute it again (even if I've previously muted and unmuted it before it reaches 10 seconds). I've tried every knob I can find in the gnome settings, pavucontrol, and even reset the entire ~/.config/pulse directory and rebooted. Nothing works. I have no idea what's going on. Can anybody suggest a fix or help me identify the problem?

2 3

mate starting messages
by Robert McBroom 14 Dec '18

14 Dec '18

Get a bunch of messages when starting mate. I can't find anything that is missing. ----- $ mate-session & $ ** Message: 18:04:22.174: couldn't access control socket: /run/user/1001/keyring/control: No such file or directory Window manager warning: Failed to load theme "BlueMenta": Failed to find a valid file for theme BlueMenta Window manager warning: Failed to load theme "Simple": Failed to find a valid file for theme Simple Window manager warning: Failed to load theme "Simple": Failed to find a valid file for theme Simple [1544742291,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application SSH_AUTH_SOCK=/run/user/1001/keyring/ssh SSH_AUTH_SOCK=/run/user/1001/keyring/ssh SSH_AUTH_SOCK=/run/user/1001/keyring/ssh ** (zeitgeist-datahub:11553): WARNING **: 18:04:56.683: kde-recent-document-provider.vala:174: Couldn't find actor for 'userapp-firefox-4hgwzw'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:09.403: kde-recent-document-provider.vala:174: Couldn't find actor for 'kwrite'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:09.439: kde-recent-document-provider.vala:174: Couldn't find actor for 'kwrite'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:09.544: kde-recent-document-provider.vala:174: Couldn't find actor for 'kate'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:09.576: kde-recent-document-provider.vala:174: Couldn't find actor for 'userapp-firefox-4hgwzw'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:09.813: kde-recent-document-provider.vala:174: Couldn't find actor for 'userapp-firefox-4hgwzw'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:09.867: kde-recent-document-provider.vala:174: Couldn't find actor for 'userapp-firefox-4hgwzw'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:10.100: kde-recent-document-provider.vala:174: Couldn't find actor for 'words'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:10.126: kde-recent-document-provider.vala:174: Couldn't find actor for 'userapp-firefox-4hgwzw'. ** (zeitgeist-datahub:11553): WARNING **: 18:05:10.162: kde-recent-document-provider.vala:174: Couldn't find actor for 'LibreOffice'.

1 0

upgrading from f28 to f29 messed up my system...
by François Patte 14 Dec '18

14 Dec '18

Bonjour, Yesterday I upgraded my system from f28 to f29 and the result is not what I expected! I can't get my "new" system working correctly: no graphic interface, a lot of errors in the logs.... I previously upgraded this system from f25 to f27, then from f27 to f28 without any problems... This system uses raid 1 + lvm: here is the result of lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 111,8G 0 disk ├─sda1 8:1 0 1G 0 part │ └─md2 9:2 0 1G 0 raid1 /boot ├─sda2 8:2 0 60G 0 part │ └─md127 9:127 0 60G 0 raid1 │ └─debian-deb--racine 253:0 0 29,3G 0 lvm / ├─sda3 8:3 0 1G 0 part └─sda4 8:4 0 49,8G 0 part └─md11 9:11 0 49,8G 0 raid1 ├─fedora-racine 253:2 0 2G 0 lvm └─fedora-usr 253:3 0 28G 0 lvm sdb 8:16 0 111,8G 0 disk ├─sdb1 8:17 0 1G 0 part │ └─md2 9:2 0 1G 0 raid1 /boot ├─sdb2 8:18 0 60G 0 part │ └─md127 9:127 0 60G 0 raid1 │ └─debian-deb--racine 253:0 0 29,3G 0 lvm / ├─sdb3 8:19 0 1G 0 part └─sdb4 8:20 0 49,8G 0 part └─md11 9:11 0 49,8G 0 raid1 ├─fedora-racine 253:2 0 2G 0 lvm └─fedora-usr 253:3 0 28G 0 lvm sdc 8:32 0 465,8G 0 disk └─sdc1 8:33 0 465,8G 0 part └─md1 9:1 0 465,7G 0 raid1 ├─annexes-data 253:7 0 260G 0 lvm /commun └─annexes-sauvegardes 253:8 0 205G 0 lvm /sauvegardes sdd 8:48 0 465,8G 0 disk └─sdd1 8:49 0 465,8G 0 part └─md1 9:1 0 465,7G 0 raid1 ├─annexes-data 253:7 0 260G 0 lvm /commun └─annexes-sauvegardes 253:8 0 205G 0 lvm /sauvegardes sde 8:64 0 931,5G 0 disk ├─sde1 8:65 0 40G 0 part │ └─md4 9:4 0 40G 0 raid1 │ ├─systeme-swap 253:1 0 4G 0 lvm [SWAP] │ ├─systeme-var 253:5 0 15G 0 lvm /var │ └─systeme-chiffre 253:6 0 15G 0 lvm └─sde2 8:66 0 891,5G 0 part └─md5 9:5 0 891,4G 0 raid1 └─data-home 253:4 0 500G 0 lvm /home sdf 8:80 0 931,5G 0 disk ├─sdf1 8:81 0 40G 0 part │ └─md4 9:4 0 40G 0 raid1 │ ├─systeme-swap 253:1 0 4G 0 lvm [SWAP] │ ├─systeme-var 253:5 0 15G 0 lvm /var │ └─systeme-chiffre 253:6 0 15G 0 lvm └─sdf2 8:82 0 891,5G 0 part └─md5 9:5 0 891,4G 0 raid1 └─data-home 253:4 0 500G 0 lvm /home sr0 11:0 1 1024M 0 rom sr1 11:1 1 1024M 0 rom Don't pay attention to the names (debian or fedora) these are the names I gave a long time ago and I did not change the labels for some volumes. Now here are the errors I get in the boot logs: 1- déc. 05 11:33:05 dipankar systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE déc. 05 11:33:05 dipankar systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. déc. 05 11:33:05 dipankar systemd[1]: Failed to start Load Kernel Modules. -- Subject: L'unité (unit) systemd-modules-load.service a échoué This error occurs several times during the boot process. 2- A lot of errors about lvm also occur: déc. 05 11:33:06 dipankar lvm[1178]: 3 logical volume(s) in volume group "systeme" now active déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:06 dipankar lvm[1178]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé<---- busy déc. 05 11:33:06 dipankar lvm[1178]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar kernel: device-mapper: table: 253:0: linear: Device lookup failed déc. 05 11:33:06 dipankar kernel: device-mapper: ioctl: error adding target to table ................. Here are all messages about lvm in the boot logs: déc. 05 11:33:05 dipankar lvm[909]: WARNING: found device with duplicate /dev/sdb2 déc. 05 11:33:05 dipankar lvm[909]: WARNING: found device with duplicate /dev/md127 déc. 05 11:33:05 dipankar lvm[909]: WARNING: Disabling lvmetad cache which does not support duplicate PVs. déc. 05 11:33:05 dipankar lvm[909]: WARNING: Scan found duplicate PVs. déc. 05 11:33:05 dipankar lvm[909]: WARNING: Not using lvmetad because cache update failed. déc. 05 11:33:05 dipankar lvm[909]: WARNING: Not using device /dev/sdb2 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:05 dipankar lvm[909]: WARNING: Not using device /dev/md127 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:05 dipankar lvm[909]: WARNING: PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG prefers device /dev/sda2 because of previous preference. déc. 05 11:33:05 dipankar lvm[909]: 1 logical volume(s) in volume group "systeme" monitored déc. 05 11:33:05 dipankar lvm[909]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:05 dipankar lvm[909]: 1 logical volume(s) in volume group "debian" monitored déc. 05 11:33:05 dipankar audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' -- Subject: L'unité (unit) lvm2-monitor.service a terminé son démarrage -- L'unité (unit) lvm2-monitor.service a terminé son démarrage, avec le résultat done. déc. 05 11:33:06 dipankar systemd[1]: Created slice system-lvm2\x2dpvscan.slice. -- Subject: L'unité (unit) system-lvm2\x2dpvscan.slice a terminé son démarrage -- L'unité (unit) system-lvm2\x2dpvscan.slice a terminé son démarrage, avec le résultat done. -- Subject: L'unité (unit) lvm2-pvscan@9:127.service a commencé à démarrer -- L'unité (unit) lvm2-pvscan@9:127.service a commencé à démarrer. -- Subject: L'unité (unit) lvm2-pvscan@9:4.service a commencé à démarrer -- L'unité (unit) lvm2-pvscan@9:4.service a commencé à démarrer. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: found device with duplicate /dev/sdb2 déc. 05 11:33:06 dipankar lvm[1178]: WARNING: found device with duplicate /dev/md127 déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Disabling lvmetad cache which does not support duplicate PVs. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Scan found duplicate PVs. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Not using lvmetad because cache update failed. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Autoactivation reading from disk instead of lvmetad. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: found device with duplicate /dev/sdb2 déc. 05 11:33:06 dipankar lvm[1182]: WARNING: found device with duplicate /dev/md127 déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Disabling lvmetad cache which does not support duplicate PVs. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Scan found duplicate PVs. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Not using lvmetad because cache update failed. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Autoactivation reading from disk instead of lvmetad. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Not using device /dev/sdb2 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Not using device /dev/md127 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1178]: WARNING: PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG prefers device /dev/sda2 because of previous preference. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Not using device /dev/sdb2 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Not using device /dev/md127 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1182]: WARNING: PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG prefers device /dev/sda2 because of previous preference. -- Subject: L'unité (unit) lvm2-pvscan@9:11.service a commencé à démarrer -- L'unité (unit) lvm2-pvscan@9:11.service a commencé à démarrer. déc. 05 11:33:06 dipankar lvm[1222]: WARNING: found device with duplicate /dev/sdb2 déc. 05 11:33:06 dipankar lvm[1222]: WARNING: found device with duplicate /dev/md127 déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Disabling lvmetad cache which does not support duplicate PVs. déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Scan found duplicate PVs. déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Not using lvmetad because cache update failed. déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Autoactivation reading from disk instead of lvmetad. -- Subject: L'unité (unit) lvm2-pvscan@9:5.service a commencé à démarrer -- L'unité (unit) lvm2-pvscan@9:5.service a commencé à démarrer. déc. 05 11:33:06 dipankar lvm[1178]: 2 logical volume(s) in volume group "fedora" now active déc. 05 11:33:06 dipankar lvm[1237]: WARNING: found device with duplicate /dev/sdb2 déc. 05 11:33:06 dipankar lvm[1237]: WARNING: found device with duplicate /dev/md127 déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Disabling lvmetad cache which does not support duplicate PVs. déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Scan found duplicate PVs. déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Not using lvmetad because cache update failed. déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Autoactivation reading from disk instead of lvmetad. déc. 05 11:33:06 dipankar lvm[1182]: 2 logical volume(s) in volume group "fedora" now active déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Not using device /dev/sdb2 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Not using device /dev/md127 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1222]: WARNING: PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG prefers device /dev/sda2 because of previous preference. -- Subject: L'unité (unit) lvm2-pvscan@9:1.service a commencé à démarrer -- L'unité (unit) lvm2-pvscan@9:1.service a commencé à démarrer. déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Not using device /dev/sdb2 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Not using device /dev/md127 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1237]: WARNING: PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG prefers device /dev/sda2 because of previous preference. déc. 05 11:33:06 dipankar lvm[1222]: 2 logical volume(s) in volume group "fedora" now active déc. 05 11:33:06 dipankar lvm[1253]: WARNING: found device with duplicate /dev/sdb2 déc. 05 11:33:06 dipankar lvm[1253]: WARNING: found device with duplicate /dev/md127 déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Disabling lvmetad cache which does not support duplicate PVs. déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Scan found duplicate PVs. déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Not using lvmetad because cache update failed. déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Autoactivation reading from disk instead of lvmetad. déc. 05 11:33:06 dipankar lvm[1237]: 2 logical volume(s) in volume group "fedora" now active déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Not using device /dev/sdb2 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Not using device /dev/md127 for PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG. déc. 05 11:33:06 dipankar lvm[1253]: WARNING: PV LjsptA-OrMt-ClBo-ksAo-ZCcO-eAtj-NGGgvG prefers device /dev/sda2 because of previous preference. déc. 05 11:33:06 dipankar lvm[1253]: 2 logical volume(s) in volume group "fedora" now active déc. 05 11:33:06 dipankar lvm[1178]: 1 logical volume(s) in volume group "data" now active déc. 05 11:33:06 dipankar lvm[1178]: 3 logical volume(s) in volume group "systeme" now active déc. 05 11:33:06 dipankar lvm[1178]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:06 dipankar lvm[1178]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1178]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1182]: 1 logical volume(s) in volume group "data" now active déc. 05 11:33:06 dipankar lvm[1222]: 1 logical volume(s) in volume group "data" now active déc. 05 11:33:06 dipankar lvm[1237]: 1 logical volume(s) in volume group "data" now active déc. 05 11:33:06 dipankar lvm[1182]: 3 logical volume(s) in volume group "systeme" now active déc. 05 11:33:06 dipankar lvm[1182]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:06 dipankar lvm[1182]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1182]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1178]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1178]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1253]: 1 logical volume(s) in volume group "data" now active déc. 05 11:33:06 dipankar lvm[1222]: 3 logical volume(s) in volume group "systeme" now active déc. 05 11:33:06 dipankar lvm[1222]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:06 dipankar lvm[1222]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1222]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1237]: 3 logical volume(s) in volume group "systeme" now active déc. 05 11:33:06 dipankar lvm[1237]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:06 dipankar lvm[1237]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1237]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1253]: 3 logical volume(s) in volume group "systeme" now active déc. 05 11:33:06 dipankar lvm[1253]: WARNING: Device mismatch detected for debian/deb-racine which is accessing /dev/md127 instead of /dev/sda2. déc. 05 11:33:06 dipankar lvm[1253]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1253]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1182]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1182]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1178]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1178]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1222]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1222]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1237]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1237]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1253]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1253]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1182]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1182]: Failed to suspend debian/deb-racine. déc. 05 11:33:06 dipankar lvm[1178]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:06 dipankar lvm[1178]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1222]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1222]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1237]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1237]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1253]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1253]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1182]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1182]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1178]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1178]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1222]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1222]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1237]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1237]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1253]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1253]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1182]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1182]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1178]: debian: refresh before autoactivation failed. déc. 05 11:33:07 dipankar lvm[1178]: Cannot activate LVs in VG debian while PVs appear on duplicate devices. déc. 05 11:33:07 dipankar lvm[1178]: 1 logical volume(s) in volume group "debian" now active déc. 05 11:33:07 dipankar lvm[1178]: debian: autoactivation failed. déc. 05 11:33:07 dipankar lvm[1222]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1222]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1237]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1237]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1253]: device-mapper: reload ioctl on (253:0) failed: Périphérique ou ressource occupé déc. 05 11:33:07 dipankar lvm[1253]: Failed to suspend debian/deb-racine. déc. 05 11:33:07 dipankar lvm[1182]: debian: refresh before autoactivation failed. déc. 05 11:33:07 dipankar lvm[1182]: Cannot activate LVs in VG debian while PVs appear on duplicate devices. déc. 05 11:33:07 dipankar lvm[1182]: Cannot activate LVs in VG debian while PVs appear on duplicate devices. déc. 05 11:33:07 dipankar lvm[1182]: 1 logical volume(s) in volume group "debian" now active déc. 05 11:33:07 dipankar lvm[1182]: debian: autoactivation failed. déc. 05 11:33:07 dipankar lvm[1222]: debian: refresh before autoactivation failed. déc. 05 11:33:07 dipankar lvm[1222]: Cannot activate LVs in VG debian while PVs appear on duplicate devices. déc. 05 11:33:07 dipankar lvm[1222]: 1 logical volume(s) in volume group "debian" now active déc. 05 11:33:07 dipankar lvm[1222]: debian: autoactivation failed. déc. 05 11:33:07 dipankar lvm[1237]: debian: refresh before autoactivation failed. déc. 05 11:33:07 dipankar lvm[1237]: Cannot activate LVs in VG debian while PVs appear on duplicate devices. déc. 05 11:33:07 dipankar lvm[1237]: 1 logical volume(s) in volume group "debian" now active déc. 05 11:33:07 dipankar lvm[1237]: debian: autoactivation failed. déc. 05 11:33:07 dipankar lvm[1253]: debian: refresh before autoactivation failed. déc. 05 11:33:07 dipankar lvm[1253]: Cannot activate LVs in VG debian while PVs appear on duplicate devices. déc. 05 11:33:07 dipankar lvm[1253]: 1 logical volume(s) in volume group "debian" now active déc. 05 11:33:07 dipankar lvm[1253]: debian: autoactivation failed. déc. 05 11:33:07 dipankar lvm[1178]: 2 logical volume(s) in volume group "annexes" now active déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:127.service: Main process exited, code=exited, status=5/NOTINSTALLED déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:127.service: Failed with result 'exit-code'. -- Subject: L'unité (unit) lvm2-pvscan@9:127.service a échoué -- L'unité (unit) lvm2-pvscan@9:127.service a échoué, avec le résultat failed. déc. 05 11:33:07 dipankar audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@9:127 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' déc. 05 11:33:07 dipankar lvm[1222]: 2 logical volume(s) in volume group "annexes" now active déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:11.service: Main process exited, code=exited, status=5/NOTINSTALLED déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:11.service: Failed with result 'exit-code'. -- Subject: L'unité (unit) lvm2-pvscan@9:11.service a échoué -- L'unité (unit) lvm2-pvscan@9:11.service a échoué, avec le résultat failed. déc. 05 11:33:07 dipankar audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@9:11 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' déc. 05 11:33:07 dipankar lvm[1182]: 2 logical volume(s) in volume group "annexes" now active déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:4.service: Main process exited, code=exited, status=5/NOTINSTALLED déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:4.service: Failed with result 'exit-code'. -- Subject: L'unité (unit) lvm2-pvscan@9:4.service a échoué -- L'unité (unit) lvm2-pvscan@9:4.service a échoué, avec le résultat failed. déc. 05 11:33:07 dipankar audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@9:4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' déc. 05 11:33:07 dipankar lvm[1237]: 2 logical volume(s) in volume group "annexes" now active déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:5.service: Main process exited, code=exited, status=5/NOTINSTALLED déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:5.service: Failed with result 'exit-code'. -- Subject: L'unité (unit) lvm2-pvscan@9:5.service a échoué -- L'unité (unit) lvm2-pvscan@9:5.service a échoué, avec le résultat failed. déc. 05 11:33:07 dipankar audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@9:5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' déc. 05 11:33:07 dipankar lvm[1253]: 2 logical volume(s) in volume group "annexes" now active déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:1.service: Main process exited, code=exited, status=5/NOTINSTALLED déc. 05 11:33:07 dipankar systemd[1]: lvm2-pvscan@9:1.service: Failed with result 'exit-code'. -- Subject: L'unité (unit) lvm2-pvscan@9:1.service a échoué -- L'unité (unit) lvm2-pvscan@9:1.service a échoué, avec le résultat failed. déc. 05 11:33:07 dipankar audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@9:1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' All the boot log (result of journalctl -xb) can be seen here: http://www.mi.parisdescartes.fr/~patte/journal I hope that someone could help me. Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte

4 7

Gnome2 Key Storage
by Robert McBroom 13 Dec '18

13 Dec '18

Firefox pops up a window saying Enter password to unlock the Certificate/Key storage an application wants access to "Gnome2 Key Storage" but it is locked Can't cancel or clear the window and none of my passwords work. I've never accessed such. Where is it and how do I set it or clear it.

2 4

Unable to use molecule
by Sudheer S 13 Dec '18

13 Dec '18

Hello, I am unable to get molecule to work. Here's the output when I try to run: molecule test --> Validating schema /home/sudheer/workspace/sudheer-projects/ansible-role-ruby/molecule/default/molecule.yml. Validation completed successfully. --> Test matrix └── default ├── destroy ├── syntax ├── create ├── prepare ├── converge ├── lint ├── side_effect ├── verify └── destroy --> Scenario: 'default' --> Action: 'destroy' PLAY [Destroy] ***************************************************************** TASK [Destroy molecule instance(s)] ******************************************** fatal: [localhost]: FAILED! => {"msg": "An unhandled exception occurred while templating '{{ lookup('file', molecule_file) | molecule_from_yaml }}'. Error was a <class 'ansible.errors.AnsibleError'>, original message: template error while templating string: no filter named 'molecule_from_yaml'. String: {{ lookup('file', molecule_file) | molecule_from_yaml }}"} PLAY RECAP ********************************************************************* localhost : ok=0 changed=0 unreachable=0 failed=1 ERROR: An error occurred during the test sequence action: 'destroy'. Cleaning up. --> Scenario: 'default' --> Action: 'destroy' PLAY [Destroy] ***************************************************************** TASK [Destroy molecule instance(s)] ******************************************** fatal: [localhost]: FAILED! => {"msg": "An unhandled exception occurred while templating '{{ lookup('file', molecule_file) | molecule_from_yaml }}'. Error was a <class 'ansible.errors.AnsibleError'>, original message: template error while templating string: no filter named 'molecule_from_yaml'. String: {{ lookup('file', molecule_file) | molecule_from_yaml }}"} PLAY RECAP ********************************************************************* localhost : ok=0 changed=0 unreachable=0 failed=1 ERROR: I have installed Docker and molecule packages. I am able to use Docker outside of molecule on the same host. I have installed these pacakges. python3-molecule.noarch 2.19-2.fc29 @updates python2-docker.noarch 3.5.0-1.fc29 @fedora docker.x86_64 2:1.13.1-62.git9cb56fd.fc29 @fedora I have tried removing python2-docker and installing python3-docker. There's no change in result. Am I missing something? - Sudheer

2 2

F29 Upgrade Still Boots F27 Kernel - Recommendations Please
by David Dembrow 12 Dec '18

12 Dec '18

When I upgraded from F27 to F28 I noticed that it would still boot up with the F27 kernel. I thought that eventually F28 would catch up with the periodic updates and it apparently has not. Now that I have upgraded to F29 and it is still booting with the F27 kernel I would like to find a resolution. This is on a few older systems which are using the 32-bit operating system. I see boot options for a F29 i686, F28 i686, and F27 i686+PAE available. It looks like the default is the F27 i686+PAE kernel. I tried booting with the other kernels and the graphic login fails so I may not have another option. Has my hardware gone obsolete? Thanks for any suggestions. ---d.dembrow

3 2

Fwd: Problems with Fedora 29 on my hardware
by Mr Brian Domenick 12 Dec '18

12 Dec '18

Hi, I have a 15 inch HP Spectre 360 running Fedora 28, it runs fine using nouveau video and wireless works. I tried to upgrade to Fedora 29. After upgrade with dnf it is fairly broken. Everything came up on the surface, but it was sluggish and sudo bash was very slow to autheticate and it was popping multiple oops messages at the top of the screen. I then did a fresh install of Fedora 29. This seemed to mostly work and no immediate sluggishness once done. I then upgraded using dnf to the latest software. This is where the bad behavior came from. After dnf upgrade sluggishness on sudo again as opposed to instaneous authentication before dnf, wifi could now nut be shut off. Oops messages on top of screen and complaining about one of the cpu's in dmesg and also complaining about nouveau. Wifi became broken and gnome network manager to shut it off wouldn't do anything. It showed as up but a browser wouldn't work. When it popped up report screen to report kernel problem it was populated with no info and all you could really do was close it. Funny thing is I did a fresh install of 29 first on my samsung laptop which has strictly intel graphics and different wireless and everything works 100% on that laptop. Any thoughts would be appreciated, I put Fedora 28 back on the HP and its fine with all the latest software there. Brian

1 0

persistent name from ifcfg-internal
by sean darcy 12 Dec '18

12 Dec '18

I'm trying to get the interface on a multi-homed machine named "internal" I have ifcfg-internal: cat ifcfg-internal # Please read /usr/share/doc/initscripts-*/sysconfig.txt # for the documentation of these parameters. TYPE=Ethernet BOOTPROTO=none DEVICE=internal ONBOOT=yes IPADDR=10.10.11.253 PREFIX=24 DEFROUTE=no IPV4_FAILURE_FATAL=no IPV6INIT=no USERCTL=no HWADDR=50:7b:9d:0b:8a:ab rebboted, but: ifconfig enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 50:7b:9d:0b:8a:ab txqueuelen 1000 (Ethernet) As I understand, NM scans the ifcfg files for HWADDR's. If there's a match, it names the interface the DEVICE name. Why not here? sean

4 10

← Newer
1
...
4
5
6
7
8
9
10
11
Older →