users June 2019

users@lists.fedoraproject.org

122 participants
137 discussions

No microphone audio -
by Bob Goodwin 21 Jun '19

21 Jun '19

I rarely have computer audio problems, it usually just works. But today I need to record voice and it does not do anything, pulse audio shows rear microphone plugged in and the level is turned up. aplay produces a test sound from the speaker and sound works as expected, just no mic audio. This a recent Fedora-30 upgrade from F-29. I don't often need the mic so I don't know if this is an artifact of an earlier problem. I tried two mics, both are old, one is ancient, but I have used them in the past. Any ideas welcome, Bob -- Bob Goodwin - Zuni, Virginia, USA http://www.qrz.com/db/W2BOD box83 FEDORA-29/64bit LINUX XFCE Fastmail POP3

4 3

Re-install Fedora without destroying user data
by CLOSE Dave 20 Jun '19

20 Jun '19

On a default Fedora installation with a sufficiently large disk, /home is a separate filesystem and should not contain any required system files. Thus it ought to be possible to completely re-install Fedora, the same version as was previously installed, without over-writing /home. I'd like to do this with kickstart, if possible. I think Anaconda offers enough options but I find the documentation a bit confusing for this purpose. Is anyone aware of an online reference describing how to do this? -- Dave Close

4 6

Laptop Keyboard and Trackpad Fail to Wake from Suspend (Open Lid)
by ricardo grant 19 Jun '19

19 Jun '19

My laptop has more frequently failed to resume from suspend, and I am looking for more information so that I can make a bug report that will be useful to both the Linux kernel team, Dell, and Fedora. I am not experienced in this area and I hope you can direct me to the correct places to gather useful information. I suspect this is a bug in the Dell BIOS from my attempts so search for a solution but I am not sure. Here is my laptop name: [root@localhost ~]# dmidecode | grep Product Product Name: Inspiron 15-5578 Product Name: 0TRDTX Is this the correct way to determine this if forgotten from purchase? Things like this I am not sure about. Fedora/Gnome has integrated logging pretty well for the user so it is simple for me to collect summary information from Gnome Logs. 17:20:18 wpa_supplicant: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/1 14:03:23 bluetoothd: Failed to set mode: Blocked through rfkill (0x12) 14:03:07 wpa_supplicant: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/1 13:49:17 kernel: hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device 13:49:16 bluetoothd: Failed to set mode: Blocked through rfkill (0x12) 13:49:16 kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f 13:49:15 wpa_supplicant: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0 13:35:26 kernel: pcieport 0000:00:1c.0: [ 0] RxErr 13:35:10 wpa_supplicant: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/0 13:34:38 kernel: pcieport 0000:00:1c.0: [ 0] RxErr 13:33:44 wpa_supplicant: dbus: wpa_dbus_property_changed: no property RoamComplete in object /fi/w1/wpa_supplicant1/Interfaces/0 13:18:28 gnome-session-b: GLib-CRITICAL: g_child_watch_add_full: assertion 'pid > 0' failed 13:18:26 bluetoothd: Failed to set mode: Blocked through rfkill (0x12) 13:18:18 gdm-session-wor: gkr-pam: unable to locate daemon control file 13:17:10 bluetoothd: Failed to set mode: Blocked through rfkill (0x12) 13:16:23 kernel: Bluetooth: hci0: unexpected event for opcode 0xfc2f 09:16:02 kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80 09:16:02 kernel: ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190215/psparse-529) It may have been better to remove the bluetooth and gnome errors but I did this just to be complete. What are my next steps?

2 2

xRDP login, then a blank green screen
by ToddAndMargo 19 Jun '19

19 Jun '19

Hi All, I just upgraded two Fedora 28 servers to Fedora 30. Both have/had xRDP running on them. After the upgrade, one works perfectly. The other one, after you enter Xorg, username, password, it switches to a big green screen, then eventually times out with: connecting to sesman ip 127.0.0.1 port 3350 sesman connect ok sending login info to session manager, please wait... login successful for display 10 started connecting connection problem, giving up some problem For the life of me, I can't figure out what is different between the two servers. I reused the good one's xrdp.ini and Xwrapper.config. The hardware is identical, except that the drive in tne working one are mechanical and the problem one are SSD. Same version of Xorg and xrdp (both are the latest). xorg-x11-server-Xorg-1.20.4-3.fc30.x86_64 xrdp-0.9.10-1.fc30.x86_64 Any words of wisdom? Many thanks, -T xrdp.ini [Globals] ini_version=1 fork=true port=3389 tcp_nodelay=true tcp_keepalive=true security_layer=negotiate certificate= key_file= autorun=Xorg allow_channels=true allow_multimon=true bitmap_cache=true bitmap_compression=true bulk_compression=true max_bpp=32 new_cursors=true use_fastpath=both blue=009cb5 grey=dedede ls_top_window_bg_color=009cb5 ls_width=350 ls_height=430 ls_bg_color=dedede ls_logo_filename= ls_logo_x_pos=55 ls_logo_y_pos=50 ls_label_x_pos=30 ls_label_width=60 ls_input_x_pos=110 ls_input_width=210 ls_input_y_pos=220 ls_btn_ok_x_pos=142 ls_btn_ok_y_pos=370 ls_btn_ok_width=85 ls_btn_ok_height=30 ls_btn_cancel_x_pos=237 ls_btn_cancel_y_pos=370 ls_btn_cancel_width=85 ls_btn_cancel_height=30 [Logging] LogFile=xrdp.log LogLevel=DEBUG EnableSyslog=true SyslogLevel=DEBUG [Channels] rdpdr=true rdpsnd=true drdynvc=true cliprdr=true rail=true xrdpvr=true tcutils=true [Xorg] name=Xorg lib=libxup.so username=ask password=ask ip=127.0.0.1 port=-1 code=20

4 7

root tutorials
by Patrick Dupre 19 Jun '19

19 Jun '19

Hello, It seems that root must have some tutorials and test https://root.cern.ch/root/roottalk/roottalk99/1188.html I cannot find them. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================

2 2

Fwd: please... help me about grubby!
by François Patte 19 Jun '19

19 Jun '19

-------- Message transféré -------- Sujet : Re: please... help me about grubby! Date : Wed, 19 Jun 2019 09:40:10 +0200 De : François Patte <francois.patte(a)mi.parisdescartes.fr> Organisation : Université Paris Descartes Pour : Chris Murphy <lists(a)colorremedies.com> Le 19/06/2019 à 05:03, Chris Murphy a écrit : > On Sat, Jun 15, 2019 at 3:24 PM François Patte > <francois.patte(a)mi.parisdescartes.fr> wrote: >> >> parttion in the /boot/grub2/grub.cfg file > > That location tells me this is BIOS GRUB (not UEFI GRUB). I also > suggest making sure the pre-boot GRUB binaries are up to date before > you convert to BLS or upgrade to Fedora 30, by using 'grub2-install > /dev/' pointed at the proper boot device (whole block device, not > partition). What is BLS? google gives me: Borne Libre Service Berne-Lötschberg-Simplon Bureau of Labor Statistics Basic Life Support A Cadillac model And a lot of companies... -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte

3 2

please... help me about grubby!
by François Patte 18 Jun '19

18 Jun '19

Bonjour, I sent several messages about kernel updates and grubby. Once upon a time I made 4 partitions on a ssd drive where the system is installed. I use raid1+lvm on sda1 and sdb1 I put the a /boot partition (raid1) for a debian install on sda3 and sdb3 I also put /boot partition (raid1) for a fedora install on sda2 and sdb2 I put a / partition (raid1+lvm) with label "debian-racine" (at that time I had a debian install) on sda4 and sdb4 I put a / partition (raid1+lvm) with label "fedora-racine" for a fedora install. So I had two linux installs: one was debian the other was fedora. I abandonned debian and used the debian partition to install a fedora version. I wanted to keep two different partitions: on one partition fedora-n on the other fedora-(n+1). Then appears the "dnf system upgrade" and I disabled the my sda3-sda4 partitions and only used sda1-sda2 partitions (with label "debian-racine") for my system. Everything was ok untill grubby replaced grub2-mkconfig: when there is a kernel update, grubby uses the disabled sda3-sda4 partitions as the / parttion in the /boot/grub2/grub.cfg file. I have now destroyed these partitions but grubby still uses them and writes a faulty /boot/grub2/grub.cfg file. Where does it find that these partitions still exist? I can't upgrade my system now because I fear that the boot config file will refer to a partition wich no longer exists on my system. Please help me! -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte

4 9

Call for Testers - Wine 4.10 update
by Michael Cronenworth 18 Jun '19

18 Jun '19

Hello! Wine 4.8 started offering the ability to compile parts of itself as Windows binaries instead of Linux binaries but Fedora had not followed suit. This is changing. The Fedora Wine 4.10 update will switch to use MinGW to compile those Windows binaries. This will keep Fedora mostly in line with upstream. Please provide karma feedback on the following updates. I'd like to see how it reacts to a large user base. Fedora 29 https://bodhi.fedoraproject.org/updates/FEDORA-2019-8cfdc622bd Fedora 30 https://bodhi.fedoraproject.org/updates/FEDORA-2019-c647a11e46 Thanks, Michael

2 5

Abrt/Retrace server(s) not working, are not accessible?
by lejeczek 18 Jun '19

18 Jun '19

hi fedorians, I wonder if it's just me, just my ABRT which cannot report anything, failing with: --- Running report_uReport --- Failed to generate microreport from the problem data ('report_uReport' exited with 1) --- Running report_uReport --- Failed to upload uReport to the server 'https://retrace.fedoraproject.org/faf' with curl: OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to retrace.fedoraproject.org:443 Error: curl_easy_perform: SSL connect error ('report_uReport' exited with 1) Indeed when I try above URL I cannot get there. Then "Upload for Analysis" and: --- Running report_EmergencyAnalysis --- An archive will be created. This archive is accessible only by ABRT developers. Therefore if you try to open the produced web location you will not be able to see it. Compressing data Sending /var/tmp/ccpp-2019-06-18-10:04:17.98009-7600.tar.gz to https://retrace.fedoraproject.org Error while uploading: 'curl_easy_perform: Couldn't connect to server' Does above work for you? many thanks, L.

1 0

grub entry
by Patrick Dupre 16 Jun '19

16 Jun '19

Hello, On one machine, when booting and entering in grub menu to choice the OS, it points on the 4th one and not on the 1st one. How can I manage this ? Thank =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================

4 4

← Newer
1
...
5
6
7
8
9
10
11
...
14
Older →

Jump to page: