June 2021 - users - Fedora mailing-lists

[FC8] ssh and CAC card???
by Todd Denniston 17 Sep '24

17 Sep '24

From what I understood, the change to openssh listed in: rpm -q --changelog openssh |less as: "* Wed Jun 20 2007 Tomas Mraz <tmraz(a)redhat.com> - 4.5p1-7 - experimental NSS keys support - correctly setup context when empty level requested (#234951) " was supposed to allow the Common Access Card (CAC) to work with the shipped Fedora 8 ssh. As per NSS usual, everything is undocumented, i.e., `ssh-add --help` does not help at all, and `man ssh-add` points to `ssh-add -s reader` # ssh-add -s 0 Enter passphrase for smartcard: SSH_AGENT_FAILURE Could not add card: 0 # ssh-add -s 1 Enter passphrase for smartcard: SSH_AGENT_FAILURE Could not add card: 1 So does anyone know how to use the possible functionality, or are we reduced to reading the source? -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter

4 8

Re: cisco ise
by Patrick O'Callaghan 02 Aug '24

02 Aug '24

On Tue, 2020-04-28 at 16:45 +0000, david richyad wrote: > cisco ise helps safeguard your business. It lets you control access throughout your network, see the user and device details, and stop/contain any threats. You can also use it to enforce security policies throughout your network. As a result, it helps prevent any technical issues and strengthens your cybersecurity measures. In short, you can manage your network security with more ease. Everything can be handled in one place, as opposed to needing multiple different applications open at once. > > https://www.fieldengineer.com/blogs/cisco-ise-deployment-guide Does this have anything to do with Fedora? Advertising is not acceptable on this list. poc

7 11

This list's search engine not working?
by HaJo Schatz 22 May '24

22 May '24

Ever since I stumbled across this list, I seem to have major difficulties searching the archives. Say I want to see my posts to the list (they all have the same footer as below), I believe I could go to http://www.redhat.com/archives/fedora-list/ and enter "HaJo" as a search string. Searching in all sections, I get 0 results. Does the search engine ignore me by some reason? BTW -- I've been posting since about June, and when showing the archives sorted by author, I do find my posts. OK, not the most helpful to search for my own posts, but I do have the same issue when searching for given topics. Any other search engine out there indexing this list reliably? Google shows 0 hits on a "site:www.redhat.com/archives/fedora-list/" search... -- HaJo Schatz <hajo(a)hajo.net> http://www.HaJo.Net PGP-Key: http://www.hajo.net/hajonet/keys/pgpkey_hajo.txt

4 5

Re: Tomcat
by Rahul Sadotra 21 May '24

21 May '24

Hi Michael, --- Michael Folin <michael.folin(a)donator.se> wrote: > how do I install Tomcat i fedora? > can't find it during the installation > If you mean during the installation of Fedora Core itself, then I don't think Tomcat is provided with Fedora Core (please feel free to correct me if I'm wrong). This means you will probably need to download Apache Jakarta Tomcat (either binaries, or the source which you'll need to build) and install it. Hope this helps. All the best, Rahul ___________________________________________________________ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com

2 1

SATA optical drives
by David Fletcher 22 Jun '23

22 Jun '23

I'm currently running FC5, will probably upgrade to F7 in a couple of months. Unfortunately my CD/DVD rewriter appears to have died, before it's even seen a dual layer disk :'( SATA hard drives run without problems for me, but now that SATA optical drives are starting to appear in the shops, would it be OK to buy one of these and get rid of another wide ribbon cable? Is anybody already running them with Fedora? Thanks for any advice/experiences. Dave F

5 4

Gnome Nautilus and no thumbnails from connected Android storage
by lejeczek 11 Jun '23

11 Jun '23

Hi guys. Despite having "Show Thumbnails => All files" in my Nautilus, I do not get thumbnails on my Android phone when connected via USB. That should work, in F34, right? many thanks, L.

8 21

Apache and umask for document root
by Alex 03 Aug '22

03 Aug '22

Hi, I've set up a virtual host for a joomla website and having some permissions problems. I've seen numerous configurations online about how to set umask for the apache user, but none have worked, including creating a systemd file (/etc/systemd/system/multi-user.target.wants/httpd.service) with the following: [Unit] Description=The Apache HTTP Server After=network.target remote-fs.target nss-lookup.target [Service] Type=notify Environment=LANG=C Umask=0006 ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND ExecReload=/usr/sbin/httpd $OPTIONS -k graceful # Send SIGWINCH for graceful stop KillSignal=SIGWINCH KillMode=mixed PrivateTmp=true [Install] WantedBy=multi-user.target The problem is that the files are owned by the joomla user, but also need to have access (both read and write) to be able to modify some files within the document root. Does anyone have any suggestions on how to set umask for the apache user? I'm also interested in recommended permissions settings for the joomla document root. Thanks, Alex

9 35

Changing date with procmail
by Michael A. Peters 08 Jun '22

08 Jun '22

Anyone know of a procmail recipe to change the date on incoming messages? If the date is in the future by more than 24 hours - I'd like to just change it to the current date. If the date is in the past by more than two weeks - I'd like to just change it to the current date. I'd like to do it in procmail - if someone knows how. I've done some searching, still have some to do. Found some stuff on extracting the date, but not on modifying it if necessary.

5 5

F33 just pretends to print
by Michael Hennebry 12 Apr '22

12 Apr '22

I have a Brother HL-L2360DL that I'd thought I'd finally managed to install. I had to go to the Brother website to get a script to run. The instructions for the script had the wrong name for it. None of the default options for Brother printers came close. The CUPS adminstration "web" pages say the right things: Idle, accepting jobs, two completed jobs. Nothing actually prints. Not even a test page. The printer never comes out of deep sleep. How do I fix this? It worked with Centos 7, but I do not know what I did. In my experience, there is no such thing as a small problem when it comes to installing a printer on Linux: Either it just works or it requires a mighty effort. I am getting mighty tired of mighty efforts. BTW how do I change the default from single- to double-sided? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

9 25

Improper shutdown, now Kernel panic.
by murph nj 23 Jan '22

23 Jan '22

Hi all: I've got an odd problem that I was hoping for some help on. The laptop was previously working fine, I am running F30, updated regularly. I've got an Acer laptop that has been shutting down suddenly. (I suspect a bad battery, working on that.) After a sudden shutdown last night, I now get a kernel panic on boot right after "Starting Switch Root..." I was able to boot from a USB stick, and was able to read the journal, but I didn't see anything obvious to help. I was able to get all of my data off of the (encrypted) disks, so that's not a problem, but I don't want to just give up, and wash and reload too quickly. Any suggestions? Thanks, --murph

6 19

Anyone running F11 on a Dell mini ? (Or another mini ?)
by linux guy 17 Jan '22

17 Jan '22

How is it working for you ? Thanks

10 21

slow startup process and dmesg times
by Anil F Duggirala 21 Aug '21

21 Aug '21

hello, I am looking at output from dmesg on my laptop and there appears to be a time when a process takes longer than what might be expected and I think this may be reducing my startup speed. My question is, is it normal for there to be a jump in time (timestamp) from 7 seconds to 18 seconds. And then from 21 seconds to 30 seconds? Are these processes slowing down my startup? dmesg output: https://pastebin.com/HhDyURjd thank you.

10 18

Long wait for start job
by Frank McCormick 14 Jul '21

14 Jul '21

Just did a new installation of the basic fedora 34 desktop the one which provides a bunch of basic window managers using a netinstall iso. The boot is interrupted for a longtime (2 minutes) while a start job runs for wait for udev to complete initialization. The timeout is three minutes and it almost reaches that point before continuing. I have looked through the syslogs but the only obvious problem is a core dump by alsa control which I don't understand because prior to this running Fedora 33 nothing similar happened. Need some advice on how to debug this.

14 142

DNF not Installing all Updates?
by Stephen Morris 06 Jul '21

06 Jul '21

Hi, I have just done a sudo dnf upgrade on F34 which I think upgraded 1311 packages. After the update finished I rebooted F34 and then ran discovery and it was still telling me there was 628 MB of F34 Platform updates to put on, which I did put on. Why is dnf not installing all updates that are available? Is there a configuration that needs to be done to alleviate this that is not done in an "out of the box" install, or, is this telling me that we shouldn't be doing updates with dnf we should be using Discovery instead? regards, Steve

7 34

Creating a user-level systemd unit
by Patrick O'Callaghan 04 Jul '21

04 Jul '21

I'm trying to get a specific service to start on login, and the usual method (KDE Autostart) isn't working so I'm trying to do it with a systemd unit: $ cat startinsync.service [Unit] Description=insync-headless service After=default.target [Service] ExecStart=/bin/sh /usr/bin/insync-headless start KillSignal=SIGINT [Install] WantedBy=default.target The docs say that the place to put the unit file is given by: $ pkg-config systemd --variable=systemduserunitdir /usr/lib/systemd/user So I copied the file there: $ ls -l /usr/lib/systemd/user/startinsync.service -rw-r--r--. 1 root root 177 Jun 29 12:31 /usr/lib/systemd/user/startinsync.service and tried to enable it: $ sudo systemctl enable startinsync Failed to enable unit: Unit file startinsync.service does not exist. I'm out of ideas. poc

8 39

Questions on creating RPM Package??
by Michael D. Setzer II 02 Jul '21

02 Jul '21

Saw all the messages on Clonezilla, and brought up a question I'd ask a long time ago, and a new one. Had asked about process to do an rpm package, and had gotten a suggestion to going a list on it, but turned out the list was dead, and had had no post for years, so that was a dead end. Have been the maintainer of the G4L disk imaging program since 2004, and build it with Fedora as the build system. Have been able to run it from the CD, USB or even from grub2 menu by manually adding it. Doesn't have all the bells or options that Clonezilla has, but does things. The grub option to add just required putting a kernel file and ramdisk.lzma file into boot directory and then using a 40_custom file. # !/bin/sh exec tail -n +3 $0 # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry G4L { linux /bz5x12.13 root=/dev/ram0 telnetd=yes initrd /ramdisk.lzma } menuentry G4L_NOSMP { linux /bz5x12.13 root=/dev/ram0 telnetd=yes nosmp initrd /ramdisk.lzma } menuentry G4L_FailSafe { linux /bz5x12.13 root=/dev/ram0 noapic noacpi pnpbios=off acpi=off pci=noacpi nosmp initrd /ramdisk.lzma } That would then add options to the grub boot menu similar to how memtest worked to add option. It would load kernel image, and then g4l in ram to run. Looked at memtest, but note that they don't have an option with the EFI version, which was my new question with shift to more systems using that? Issues with creating signed kernels? Wondering if there might be information or someone might know of a list or page? Thanks.

3 4

ctl C/ctl X
by Patrick Dupre 30 Jun '21

30 Jun '21

Hello, Before fc34 (i.e. in fc32), I used to used ctlC to interrupt any sort of process. In fc34, to have the same result, I need to do ctlC ctlX How can I avoid to have to make this double command? Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

6 8

bind-chroot not duplicating my forward and reverse tables
by ToddAndMargo 29 Jun '21

29 Jun '21

Hi All, Fedora 34 bind-chroot-9.16.16-1.fc34.x86_64 I am trying to clean up my bind-chroot forward and reverse files. The goal is to have bind-chroot do its thing by duplicating these two files over into /var/named/chroot/var/named/slaves/ with the identical inodes like it does with named.root and named.root.key: # stat /etc/named.root.key /var/named/chroot/etc/named.root.key ... File: /etc/named.root.key Inode: 60033354 ... File: /var/named/chroot/etc/named.root.key ... Inode: 60033354 In my /etc/named.conf, I have zone "abc.local" { type master; # file "/var/named/chroot/var/named/slaves/abc.hosts"; file "slaves/abc.hosts"; allow-update { key DHCP_UPDATER; }; }; zone "255.168.192.in-addr.arpa" { type master; # file "/var/named/chroot/var/named/slaves/abc.hosts.rev"; file "slaves/abc.hosts.rev"; allow-update { key DHCP_UPDATER; }; }; After I stopped # systemctl start named-chroot I copied and moved the following: Before: # find /var/named/ -iname abc.hosts\* /var/named/chroot/var/named/slaves/abc.hosts.000 /var/named/chroot/var/named/slaves/abc.hosts.rev.000 # cp /var/named/chroot/var/named/slaves/abc.hosts /var/named/chroot/var/named/slaves/abc.hosts.000 # mv /var/named/chroot/var/named/slaves/abc.hosts . # cp /var/named/chroot/var/named/slaves/abc.hosts.rev /var/named/chroot/var/named/slaves/abc.hosts.rev.000 # mv /var/named/chroot/var/named/slaves/abc.hosts.rev . # find /var/named/ -iname abc.hosts* After: # find /var/named/ -iname abc.hosts\* /var/named/slaves/abc.hosts.rev /var/named/slaves/abc.hosts /var/named/chroot/var/named/slaves/abc.hosts.000 /var/named/chroot/var/named/slaves/abc.hosts.rev.000 But when I restarted named-chroot, my great plans got dashed: # systemctl start named-chroot ... Jun 24 20:35:45 rn6.abc.local bash[83464]: zone abc.local/IN: loading from master file /slaves/abc.hosts faile> Jun 24 20:35:45 rn6.abc.local bash[83464]: zone abc.local/IN: not loaded due to errors. Jun 24 20:35:45 rn6.abc.local bash[83464]: _default/abc.local/IN: file not found Jun 24 20:35:45 rn6.abc.local bash[83464]: zone 255.168.192.in-addr.arpa/IN: loading from master file /slaves/abc.host> Jun 24 20:35:45 rn6.abc.local bash[83464]: zone 255.168.192.in-addr.arpa/IN: not loaded due to errors. Jun 24 20:35:45 rn6.abc.local bash[83464]: _default/255.168.192.in-addr.arpa/IN: file not found Jun 24 20:35:45 rn6.abc.local bash[83464]: zone 0.0.127.in-addr.arpa/IN: loaded serial 1997022700 named-chroot can't find abc.hosts or abc.hosts.rev in /var/named/chroot/var/named/slaves And in case they got copied to somewhere else I did another find: # find /var/named/ -iname abc.hosts\* /var/named/slaves/abc.hosts.rev /var/named/slaves/abc.hosts /var/named/chroot/var/named/slaves/abc.hosts.000 /var/named/chroot/var/named/slaves/abc.hosts.rev.000 No change. What am I missing? Many thanks, -T

3 16

f keys and pasting
by ToddAndMargo 29 Jun '21

29 Jun '21

Hi All, Fedora 34 Is there a way to program my F keys to paste text when I press them? Many thanks, -T

1 1

Xscreensaver daemon does not start on boot after last update
by Terry Polzin 29 Jun '21

29 Jun '21

It seems I have to start it manually. It's not part of systemd systemctl enable xscreensaver Failed to enable unit: Unit file xscreensaver.service does not exist.

3 4

rpmbuild
by Patrick Dupre 29 Jun '21

29 Jun '21

Hello, running rpmbuild -bb perl-Alien-GSL.spec I get: PM build errors: File not found: /home/pdupre/rpmbuild/BUILDROOT/perl-Alien-GSL-1.03-1.fc32.x86_64/usr/share/perl5/vendor_perl/* rpmbuild/BUILDROOT/perl-Alien-GSL-1.03-1.fc32.x86_64/usr/share/perl5 does not exit. I guess that I need to change something in the .spec file Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

1 0

scilab
by Patrick Dupre 28 Jun '21

28 Jun '21

Hello, Trying to run scilab under fedora34 '/usr/local/scilab-6.1.0/bin/scilab) from the files available on the scilab web site, I get Gtk-Message: 15:06:56.350: Failed to load module "pk-gtk-module" dnf repoquery --whatprovides 'pk-gtk-module' does not provide any information rpmfind provides PackageKit-gtk3-module (/usr/lib64/gnome-settings-daemon-3.0/gtk-modules/pk-gtk-module.desktop /usr/lib64/gtk-3.0/modules/libpk-gtk-module.so) Package PackageKit-gtk3-module-1.2.3-1.fc34.x86_64 is already installed I am not sure about what I should do =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

4 5

Install Clonezilla on Fedora 34.
by Ger van Dijck 28 Jun '21

28 Jun '21

Hi all, I tried to install Clonezilla on Fedora 34 . But no luck : I need help. Regards , Ger van Dijck.

5 6

conflict between mythtv and rtl-sdr
by Eyal Lebedinsky 28 Jun '21

28 Jun '21

After a recent update which installed rtl-sdr-0.6.0-9.fc34.x86_64 mythbackend failed to see the tuners. This was caused by these permissions: crw-rw----+ 1 root rtlsdr 212, 3 Jun 20 23:10 /dev/dvb/adapter0/frontend0 set by /usr/lib/udev/rules.d/10-rtl-sdr.rules and mythbackend is not a member of rtlsdr group. There seems to be a conflict between mythtv-backend and rtl-sdr. How should this be resolved? Is it proper for one package (rtl-sdr) to take ownership of these devices? ATM I just change the permissions of dvb tuners from rc.local but this is not ideal. Or I could add mythtv user to rtlsdr group. TIA -- Eyal Lebedinsky (fedora(a)eyal.emu.id.au)

3 2

Fedora-34 breaks KDE pager
by Jonathan Ryshpan 28 Jun '21

28 Jun '21

In versions up to Fedora-34, dragging a window icon in the pager from one desktop to another used to move the related window from that desktop to the other. This no longer works. Has the function been removed or is there some option that needs to be set (or whatever)? Platform: Fedora-34 KDE Plasma: 5.22.2 KDE Framework: 5.83.0 Graphics: Wayland -- Thanks Jonathan Ryshpan <jonrysh(a)pacbell.net> The world is so full of a number of things That we should all be as happy as kings. -- Robert Lewis Stevenson

3 2

pipewire / loopback
by Frank Elsner 28 Jun '21

28 Jun '21

Hi all, after upgrading my X230i my sound configuration has a loopback interface that attracted attention with a feedback. I had to set the volume to zero for playback and recording to stop the feedback. What is this for? And how do I get rid of this? Greetings, Frank Elsner

1 0

packagekitd Hogging CPU
by Tim Evans 27 Jun '21

27 Jun '21

$ uname -a Linux harrier 5.12.11-300.fc34.x86_64 #1 SMP Wed Jun 16 15:47:58 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux As I sit here, my Lenovo T530 laptop is reporting packagekitd is taking anywhere from 20 to 40 percent of CPU, per 'top.' There is continuous disk activity. Nothing going on with the system other than Thunderbird e-mail and Chrome browser. This seems to go on, with CPU percentage growing over time, and it rebooting cures this, but it comes back after the system has slept overnight (lid closed). packagekit is gnome-packagekit-common-3.32.0-7.fc34.x86_64 -- Tim Evans |5 Chestnut Court 443-394-3864 |Owings Mills, MD 21117

9 25

background application
by Patrick Dupre 27 Jun '21

27 Jun '21

Hello, With fedora34, I have an application running in background mode under the name of a user. Hpw can I control such a behavior? Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

5 13

rpmbuild
by Patrick Dupre 27 Jun '21

27 Jun '21

Hello, I am trying to generate a rpm package from the sources of perl-PDL-Graphics-PLplot-0.72 I run cpanspec to generate the .spec file (see below) and I get. setting SOURCE_DATE_EPOCH=1624752000 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.iQt9av + umask 022 + cd /home/pdupre/rpmbuild/BUILD + cd /home/pdupre/rpmbuild/BUILD + rm -rf PDL-Graphics-PLplot-0.72 + /usr/bin/gzip -dc /home/pdupre/rpmbuild/SOURCES/PDL-Graphics-PLplot-0.72.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd PDL-Graphics-PLplot-0.72 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ADwt9P + umask 022 + cd /home/pdupre/rpmbuild/BUILD + cd PDL-Graphics-PLplot-0.72 + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' PDL is installed Bad value support required! (Turn on WITH_BADVAL in perldl.conf) Not building PDL::Graphics::PLplot Bad value support required! (Turn on WITH_BADVAL in perldl.conf) Not building PDL::Graphics::PLplot Checking if your kit is complete... Looks good + make -j4 make: Nothing to be done for 'all'. + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.VQPCoW + umask 022 + cd /home/pdupre/rpmbuild/BUILD + '[' /home/pdupre/rpmbuild/BUILDROOT/perl-PDL-Graphics-PLplot-0.72-1.fc34.x86_64 '!=' / ']' + rm -rf /home/pdupre/rpmbuild/BUILDROOT/perl-PDL-Graphics-PLplot-0.72-1.fc34.x86_64 ++ dirname /home/pdupre/rpmbuild/BUILDROOT/perl-PDL-Graphics-PLplot-0.72-1.fc34.x86_64 + mkdir -p /home/pdupre/rpmbuild/BUILDROOT + mkdir /home/pdupre/rpmbuild/BUILDROOT/perl-PDL-Graphics-PLplot-0.72-1.fc34.x86_64 + cd PDL-Graphics-PLplot-0.72 + rm -rf /home/pdupre/rpmbuild/BUILDROOT/perl-PDL-Graphics-PLplot-0.72-1.fc34.x86_64 + make pure_install PERL_INSTALL_ROOT=/home/pdupre/rpmbuild/BUILDROOT/perl-PDL-Graphics-PLplot-0.72-1.fc34.x86_64 make: *** No rule to make target 'pure_install'. Stop. error: Bad exit status from /var/tmp/rpm-tmp.VQPCoW (%install) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.VQPCoW (%install) any idea? spec file Name: perl-PDL-Graphics-PLplot Version: 0.72 Release: 1%{?dist} Summary: PDL::Graphics::PLplot Perl module License: CHECK(Distributable) Group: Development/Libraries URL: http://search.cpan.org/dist/PDL-Graphics-PLplot/ Source0: http://www.cpan.org/modules/by-module/PDL/PDL-Graphics-PLplot-%{version}.ta… BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: perl(ExtUtils::MakeMaker) Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version)) %description The interface consists of two levels. A low level interface which maps closely to the PLplot C interface, and a high level, object-oriented interface which is easier to use. %prep %setup -q -n PDL-Graphics-PLplot-%{version} %build %{__perl} Makefile.PL INSTALLDIRS=vendor OPTIMIZE="$RPM_OPT_FLAGS" make %{?_smp_mflags} %install rm -rf $RPM_BUILD_ROOT make pure_install PERL_INSTALL_ROOT=$RPM_BUILD_ROOT find $RPM_BUILD_ROOT -type f -name .packlist -exec rm -f {} \; find $RPM_BUILD_ROOT -type f -name '*.bs' -size 0 -exec rm -f {} \; find $RPM_BUILD_ROOT -depth -type d -exec rmdir {} 2>/dev/null \; %{_fixperms} $RPM_BUILD_ROOT/* %check make test %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root,-) %doc Changes META.json plplot.pd README %{perl_vendorarch}/auto/* %{perl_vendorarch}/PDL* %{_mandir}/man3/* %changelog * Sun Jun 27 2021 Patrick Dupre <pdupre(a)gmx.com> 0.72-1 - Specfile autogenerated by cpanspec 1.78. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

1 0

Tor killed my other browsers; Name or service not known; uninstalling does not help
by toddandmargo 26 Jun '21

26 Jun '21

Hi All, Fedora 34 Xfce 4.14 I am in real trouble here. My business is most shutdown over this. My browsers, Thunderbird, and ping won't work. Nothing that used the Internet worked. Well, almost. I can not find anything about this issue on Google or Duck Duck Go. After installing Tor yesterday, all was well. Tor Browser worked well and all my other browsers and eMail continued to work along side it. I was happy. But that was about to change. After booting up this morning, only Tor Browser and Brave in Tor mode worked. ALL my qemu-kvm virtual machines work perfectly (I am writing this from one of them and I despise web mail). `host xxxx` worked. $ host gbis.com gbis.com has address 207.228.37.200 gbis.com mail is handled by 0 mx.greatbasin.net. `ping host-name` did not $ ping gbis.com ping: gbis.com: Name or service not known If I look up the IP address with "host" and used that instead, `ping IP` worked. All my browser also worked with the IP address. "traceroute" only works with IP as well. So I removed Tor: $ rm -rf ./.local/share/torbrowser/tbb/x86_64/tor-browser_en-US # dnf remove tor torbrowser-launcher torsocks $ rm -rf ./.local/share/torbrowser $ rm -rf ./.cache/torbrowser $ rm -rf ./.config/torbrowser # rm -rf /etc/tor Reboot. No change. What the <expletive deleted> is going on? And how do I recover my machine? Many thanks, -T

8 32

Verifying Fedora-34
by Jonathan Ryshpan 26 Jun '21

26 Jun '21

While verifying my download of Fedora-34, I encounter this message: $ gpg --verify-files *-CHECKSUM gpg: Signature made Fri 23 Apr 2021 12:36:44 PM PDT gpg: using RSA key 8C5BA6990BDB26E19F2A1A801161AE6945719A39 gpg: Good signature from "Fedora (34) <fedora-34-primary(a)fedoraproject.org>" [unknown] gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: 8C5B A699 0BDB 26E1 9F2A 1A80 1161 AE69 4571 9A39 I surmise this means that my computer's list of trusted signatures needs to be brought up to date (actually it may not even exist). How can this be done? A link to info would suffice. -- Thanks - jon <jonrysh(a)pacbell.net> "Never try to teach a pig to sing. It wastes time and annoys the pig."

3 6

Learning ipv6 quirks
by Robert McBroom 26 Jun '21

26 Jun '21

Trying to connect to NAS with nfs using the ipv6 addressing. @RobertPC ~]#ping fd2e:cb3b:f005::ec1 PING fd2e:cb3b:f005::ec1(fd2e:cb3b:f005::ec1) 56 data bytes 64 bytes from fd2e:cb3b:f005::ec1: icmp_seq=1 ttl=64 time=0.120 ms 64 bytes from fd2e:cb3b:f005::ec1: icmp_seq=2 ttl=64 time=0.100 ms 64 bytes from fd2e:cb3b:f005::ec1: icmp_seq=3 ttl=64 time=0.117 ms @RobertPC ~]#mount -v -t nfs fd2e:cb3b:f005::ec1:/mnt/HD/HD_a2/mcstuffy /mnt/mcstuffy mount.nfs: timeout set for Mon Jun 21 06:41:56 2021 mount.nfs: Failed to resolve server fd2e: Name or service not known @RobertPC ~]# mount -v -t nfs [fd2e:cb3b:f005::ec1]:/mnt/HD/HD_a2/mcstuffy /mnt/mcstuffy mount.nfs: timeout set for Mon Jun 21 06:42:25 2021 mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: trying text-based options 'vers=4.2,addr=fd2e:cb3b:f005::ec1,clientaddr=fd2e:cb3b:f005::ec1' mount.nfs: mount(2): Connection refused mount.nfs: trying text-based options 'addr=fd2e:cb3b:f005::ec1' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: portmap query retrying: RPC: Program not registered mount.nfs: prog 100003, trying vers=3, prot=17 mount.nfs: portmap query failed: RPC: Program not registered mount.nfs: Connection refused @RobertPC ~]# mount -v -t nfs [fd2e:cb3b:f005::ec1%enp2s0]:/mnt/HD/HD_a2/mcstuffy /mnt/mcstuffy mount.nfs: timeout set for Mon Jun 21 09:18:19 2021 mount.nfs: Failed to resolve server fd2e:cb3b:f005::ec1%enp2s0: Name or service not known The ipv4 connection works @RobertPC ~]# mount -v -t nfs 192.168.1.239:/mnt/HD/HD_a2/mcstuffy /mnt/mcstuffy mount.nfs: timeout set for Mon Jun 21 06:43:30 2021 mount.nfs: trying text-based options 'vers=4.2,addr=192.168.1.239,clientaddr=192.168.1.185' mount.nfs: mount(2): Protocol not supported mount.nfs: trying text-based options 'vers=4,minorversion=1,addr=192.168.1.239,clientaddr=192.168.1.185' mount.nfs: mount(2): Protocol not supported mount.nfs: trying text-based options 'vers=4,addr=192.168.1.239,clientaddr=192.168.1.185' mount.nfs: mount(2): Protocol not supported mount.nfs: trying text-based options 'addr=192.168.1.239' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 192.168.1.239 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 192.168.1.239 prog 100005 vers 3 prot UDP port 49748 What is needed to get the ipv6 connection?

7 33

fedora 34 upgrade errors
by Frank McCormick 26 Jun '21

26 Jun '21

Upgraded my Fedora 34 this morning..a lot of additions and upgrades followed by this: Detected unsafe path transition / → /run during canonicalization of /run/systemd. There were about 25 lines like this with different directory names. Is this something to be concerned about ? Thanks

1 0

how to install and use dbus-broker?
by Cătălin George Feștilă 26 Jun '21

26 Jun '21

How can I install and use dbus-broker on Fedora 34?

2 1

fc34: no power up on reboot after kernel upgrade
by sean darcy 25 Jun '21

25 Jun '21

FC34 on a headless server. If I upgrade the kernel and reboot, the machine will not power up. I can manually power it up without a problem. Also, no problem rebooting without a kernel upgrade. Any help appreciated. sean

1 0

RedShift
by ToddAndMargo 25 Jun '21

25 Jun '21

Hi All, Fedora 34 Xfce 4.14 redshift-1.12-11.fc34.x86_64 redshift-gtk-1.12-11.fc34.x86_64 Hi All, Red Shift is all screwed up again: Unable to connect to GeoClue. Unable to get location from provider: https://github.com/jonls/redshift/issues/318#issuecomment-865667340 is back in full force. Is there an alternatives to Red Shift? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When we ask for advice, we are usually looking for an accomplice. -- Charles Varlet de La Grange ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

5 5

GNOME 40 mouse lag
by Leander Hutton 25 Jun '21

25 Jun '21

Has anyone else been seeing some GNOME 40 animation freezes and lags? I have a Dell 9310 XPS (11th Gen i7/16GB of RAM) and with animations enabled the mouse cursor will sometimes freeze and lag. Strangely I have access to a Dell 9300 (10th Gen i7) running FL34 and it's fine. I'm not running TLP on mine and I've wiped it to make sure I didn't have some weird old config in place. The mouse will just quit responding and suddenly "jump" to catch up at times, it even does this when the machine is not under load. The 9300 has a 4K screen and the 9310 has a 1200p screen so if anything I think the 9310 should be more lag-free with the faster CPU/GPU and less pixels to push around. I don't think it's a hardware problem since it's fine in GNOME 3.38 when I tried Debian and FL33 on here. I've been running Linux on this machine exclusively. I thought about leaving it on Debian but I'd like to use Fedora due to PipeWire and the better BT audio codec support. I know there are some forth coming performance enhancements for the GNOME 40 series too. Just wondering if anyone else has similar hardware and has seen similar quirks. Thanks! Leander -- --- Leander Hutton leander(a)one-button.org www.one-button.org

1 0

Can qemu be safely removed?
by Erik P. Olsen 24 Jun '21

24 Jun '21

Hello, I don't believe I am using qemu for anything and would therefore prefer to remove it entirely. Is it doable? Thanks. -- Erik P. Olsen - Copenhagen, Denmark Fedora 34/64 bit xfce Claws-Mail POP3 Gramps 5.1.3 Bacula 11.0.5

2 2

plymouth-quit-wait taking too long
by Christopher Ross 24 Jun '21

24 Jun '21

Dear fellow Fedorans, Fedora 34 on my i7 with 32G RAM and nvidia RTX2060 card takes minutes to boot, and when it finally does there are a number of "something went wrong" notifications. How best can I diagnose and fix this so that it boots quickly and without errors? CPU: Quad Core Intel Core i7-3770K (-MT MCP-) speed/min/max: 4324/1600/4400 MHz Kernel: 5.12.11-300.fc34.x86_64 x86_64 Up: 2h 30m Mem: 8717.9/31785.3 MiB (27.4%) Storage: 25.69 TiB (59.7% used) Procs: 391 Shell: Bash inxi: 3.3.03 The top part of systemd-analyze-blame is 1min 23.232s plymouth-quit-wait.service 53.077s cs-firewall-bouncer.service 52.219s dovecot.service 26.525s crowdsec.service 26.075s libvirtd.service 25.910s postfix.service 25.888s vmware.service 25.870s nfs-server.service 8.275s network.service 4.279s abrtd.service 4.111s smartd.service 1.921s systemd-udev-settle.service 1.355s lvm2-monitor.service 1.309s user(a)1006.service 1.188s systemd-fsck@dev-disk-by\x2duuid-d91d02e3\x2dce79\x2d4aa8\x2d9446\x2df531c05ca7a7.service 1.145s udisks2.service 711ms akmods.service 602ms initrd-switch-root.service Many thanks, Chris R.

4 6

Questions about Fedora andsounds
by Cisco Tissera 23 Jun '21

23 Jun '21

Hello everyone, The questions, in more detail, are these: is there a way on Fedora 34 to play a sound of my choosing at startup or log in? If yes, how? Does anyone here use a different sound theme than the default one? Thanks for any answer. Best regards. Francisco.

3 2

pjsua and audio
by Wade Hampton 23 Jun '21

23 Jun '21

Subject: Re: pjsua and audio On 2021-06-22 9:46 a.m., Wade Hampton wrote: > I am on Fedora 33 and am trying to get pjsua working with my Asterisk > server. > Each time I try to make a call, I get an error about the audio device. > Is it trying to use pulseaudio or alsa by default? I saw one other post > with the same error from Fedora 27, with no answer... > > The package is: pjsua-2.9-5.fc33.x86_64 > > The error is: > 12:28:32.653 pjsua_aud.c !..Error retrieving default audio > device parameters: Unable to find default audio device > (PJMEDIA_EAUD_NODEFDEV) [status=420006] >What's your configuration? >Are there any other log messages? This is on my Fedora 33 laptop with default sound config (pulseaudio). Audio works properly (chrome, firefox, audacity, etc.). I also can run jack on it. I built the latest version (2.10) and ran it. Audio works fine. Maybe time to update the version in Fedora? -- Wade Hampton

1 0

pjsua and audio
by Wade Hampton 22 Jun '21

22 Jun '21

I am on Fedora 33 and am trying to get pjsua working with my Asterisk server. Each time I try to make a call, I get an error about the audio device. Is it trying to use pulseaudio or alsa by default? I saw one other post with the same error from Fedora 27, with no answer... The package is: pjsua-2.9-5.fc33.x86_64 The error is: 12:28:32.653 pjsua_aud.c !..Error retrieving default audio device parameters: Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) [status=420006] Thanks -- W Hampton

2 1

No Swap Allocation in FSTAB
by Stephen Morris 22 Jun '21

22 Jun '21

Hi, I've noticed when trying remediate performance issues in F34 under a vm, that fedora does not have a swap specification in fstab anymore, but is using, in my case, and 8GB swap partition in /dev/zram0. Does this mean that if I create a swap partition of a bigger size and specify it in fstab it will be ignored? Alternatively, given the fedora is using it's own rules for determining the swap size based on the amount of memory available, is there any way to increase the size of /dev/zram0 so that there is more swap space available to the system? regards, Steve

6 15

gsl
by Patrick Dupre 21 Jun '21

21 Jun '21

Hello, There is a new version of gsl (2.7). http://www.gnu.org/software/gsl/ What are the plans to have it available in fc34? Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

2 1

test message
by Frank McCormick 20 Jun '21

20 Jun '21

My provider is refusing messages from this list. I'm chccking to see if that's still true.

4 7

fedpkg
by Patrick Dupre 19 Jun '21

19 Jun '21

Hello, Trying to build a rpm package for gsl.2.7 I downloaded gsl-2.7.tar.gz I copy cp -a gsl.spec.in gsl.spec and run (in gsl-2.7) fedpkg --release fc34 local but I get Traceback (most recent call last): File "/usr/bin/fedpkg", line 33, in <module> sys.exit(load_entry_point('fedpkg==1.40', 'console_scripts', 'fedpkg')()) File "/usr/bin/fedpkg", line 25, in importlib_load_entry_point return next(matches).load() File "/usr/lib64/python3.9/importlib/metadata.py", line 77, in load module = import_module(match.group('module')) File "/usr/lib64/python3.9/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1030, in _gcd_import File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 972, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 228, in _call_with_frames_removed File "<frozen importlib._bootstrap>", line 1030, in _gcd_import File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 986, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 680, in _load_unlocked File "<frozen importlib._bootstrap_external>", line 855, in exec_module File "<frozen importlib._bootstrap>", line 228, in _call_with_frames_removed File "/usr/lib/python3.9/site-packages/fedpkg/__init__.py", line 12, in <module> import pyrpkg File "/usr/lib/python3.9/site-packages/pyrpkg/__init__.py", line 47, in <module> from pyrpkg.lookaside import CGILookasideCache File "/usr/lib/python3.9/site-packages/pyrpkg/lookaside.py", line 23, in <module> import pycurl ImportError: pycurl: libcurl link-time version (7.64.1) is older than compile-time version (7.75.0) Can I easy fix this issue? Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

5 12

rpmbuild perl-PDL-Graphics-PLplot
by Patrick Dupre 19 Jun '21

19 Jun '21

Hello, This spec file provide the an error. Can you help me to fix it? PLplot.c: In function 'XS_PDL__Graphics__PLplot_plgfci': PLplot.c:85895:25: warning: unused variable 'RETVAL' [-Wunused-variable] 85895 | unsigned int RETVAL; | ^~~~~~ /usr/lib64/perl5/vendor_perl/PDL/PP.pm: In function 'pdl_init_pltr_copy': /usr/lib64/perl5/vendor_perl/PDL/PP.pm:3385:61: warning: array subscript '_7 + -1' is outside the bounds of an interior zero-length array 'struct pdl *[0:]' [-Wzero-length-bounds] 3385 | for(i=0; i<__copy->vtable->npdls; i++) | ~~~~~~~~~~~~~~~~~^~~ In file included from /usr/lib64/perl5/vendor_perl/PDL/PP.pm:1020: /usr/lib64/perl5/vendor_perl/PDL/Core/pdl.h:291:8: note: while referencing 'pdls' 291 | pdl *pdls[np] | ^~~~ /usr/lib64/perl5/vendor_perl/PDL/PP.pm:3385:38: warning: array subscript '_7 + -1' is outside the bounds of an interior zero-length array 'struct pdl *[0:]' [-Wzero-length-bounds] 3385 | for(i=0; i<__copy->vtable->npdls; i++) | ~~~~~~~~~~~~^~~ In file included from /usr/lib64/perl5/vendor_perl/PDL/PP.pm:1020: /usr/lib64/perl5/vendor_perl/PDL/Core/pdl.h:291:8: note: while referencing 'pdls' 291 | pdl *pdls[np] | ^~~~ cc1: some warnings being treated as errors make: *** [Makefile:345: PLplot.o] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.FwlY8K (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.FwlY8K (%build) ------------------------------------------------------- Name: perl-PDL-Graphics-PLplot Version: 0.74 Release: 1%{?dist} Summary: PDL::Graphics::PLplot Perl module License: CHECK(Distributable) Group: Development/Libraries URL: http://search.cpan.org/dist/PDL-Graphics-PLplot/ Source0: http://www.cpan.org/modules/by-module/PDL/PDL-Graphics-PLplot-%{version}.ta… BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: perl(ExtUtils::MakeMaker) BuildRequires: perl(PDL) Requires: perl(PDL) Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version)) %description The interface consists of two levels. A low level interface which maps closely to the PLplot C interface, and a high level, object-oriented interface which is easier to use. %prep %setup -q -n PDL-Graphics-PLplot-%{version} %build %{__perl} Makefile.PL INSTALLDIRS=vendor OPTIMIZE="$RPM_OPT_FLAGS" make %{?_smp_mflags} %install rm -rf $RPM_BUILD_ROOT make pure_install PERL_INSTALL_ROOT=$RPM_BUILD_ROOT find $RPM_BUILD_ROOT -type f -name .packlist -exec rm -f {} \; find $RPM_BUILD_ROOT -type f -name '*.bs' -size 0 -exec rm -f {} \; find $RPM_BUILD_ROOT -depth -type d -exec rmdir {} 2>/dev/null \; %{_fixperms} $RPM_BUILD_ROOT/* %check make test %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root,-) %doc Changes META.json plplot.pd README %{perl_vendorarch}/auto/* %{perl_vendorarch}/PDL* %{_mandir}/man3/* %changelog * Sat Jun 19 2021 Patrick Dupre <pdupre(a)gmx.com> 0.74-1 - Specfile autogenerated by cpanspec 1.78. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

2 2

scilab bin
by Patrick Dupre 19 Jun '21

19 Jun '21

Trying to install scilab 6.1.0 from scilab-6.1.0.bin.linux-x86_64.tar.gz I got: /usr/bin/chcon: failed to change context of '/usr/local/scilab-6.1.0/bin/scilab-bin' to ‘unconfined_u:object_r:execmem_exec_t:s0’: Operation not permitted Error: Cannot chcon 'scilab-bin' /usr/bin/chcon: failed to change context of '/usr/local/scilab-6.1.0/bin/scilab-cli-bin' to ‘unconfined_u:object_r:execmem_exec_t:s0’: Operation not permitted Error: Cannot chcon 'scilab-cli-bin' scilab-bin: error while loading shared libraries: libldap-2.4.so.2: cannot open shared object file: No such file or directory I could bit find libldap only penldap-compat.i686 : Package providing legacy non-threded libldap openldap-compat.x86_64 : Package providing legacy non-threded libldap It is compatible? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

6 12

My FC33->FC34 bind-chroot upgrade notes
by ToddAndMargo 19 Jun '21

19 Jun '21

Hi All, Thank you all for the enormous help in me getting bind-chroot working after upgrading to Fedora 34. Here are my notes. Hope this helps someone else. -T Broken bind-chroot repair after upgrading to Fedora 34: # means root $ means user 1) temporary workaround so you can surf the Internet for help: Change /etc/resolv.conf to # search your_domain # nameserver your_IP nameserver 208.67.222.123 2) in their "ultimate wisdom", the rpm maintainers disabled the service after upgrading it. See the following bug I posted on 2021-06-14: Bind-chroot upgrade from FC3 to FC34 disables the service breaking a server https://bugzilla.redhat.com/show_bug.cgi?id=1972000 To repair: # systemctl enable named-chroot.service # systemctl start named-chroot.service Other useful command(s): # systemctl stop named-chroot.service # systemctl status named-chroot.service # systemctl restart named-chroot.service 3) the new version of bind-chroot enables "dns security validation" by default. To repair, place the following in your named.conf: by itself at the bottom: include "/etc/named.root.key"; add the following to your "options" block: dnssec-validation yes; Other useful command(s): Validation check: $ delv @$IP com ds $ delv @208.67.222.123 com ds ; fully validated ... 4) check (and repair) your configurations: named.conf: # named-checkconf -l -t /var/named/chroot /etc/named.conf Note: if you get the following error message, `/etc/named.root.key:1: option 'managed-keys' is deprecated` it is a bug in named-checkconf. See the following I posted on 2021-06-14. Just ignore the message. named-checkconf gives confusing depreciated 'managed-keys' message https://bugzilla.redhat.com/show_bug.cgi?id=1972022 Zones: # named-checkzone -t directory domain filename Note: the "domain name" in the following comes from named.conf zone, not `domainname`. For example: zone "abc.local" { type master; file "slaves/rent-a-nerd.hosts"; allow-update { key DHCP_UPDATER; }; }; The "domain" is the name of the "zone". "abc.local" in the above # named-checkzone -t /var/named/chroot/var/named/slaves abc.local abc.hosts zone abc.local/IN: loaded serial 265 OK # named-checkzone -t /var/named/chroot/var/named/slaves 255.168.192.in-addr.arpa abc.hosts.rev zone 255.168.192.in-addr.arpa/IN: loaded serial 213 OK 5) restart the bind-chroot service: Change /etc/resolv.conf back to search your_domain nameserver your_IP # nameserver 208.67.222.123 # systemctl restart named-chroot.service check for and repair errors with: $ systemctl status named-chroot.service # tail -f /var/log/messages

6 31

Xorg Scaling Issues
by Stephen Morris 18 Jun '21

18 Jun '21

Hi, I have config file in /etc/X11/xorg.conf.d that is listing modelines for all resolutions that xrandr indicates is supported by the vmware video driver. With that file existing can anyone suggest why Gnome in Xorg will scale to 4k resolution when the desktop is scaled, but Plasma in X11 will not scale? regards, Steve

7 24

pavucontrol and 5.1 audio.
by Steve Underwood 18 Jun '21

18 Jun '21

Hi, I've just started using 5.1 audio on a Fedora 33 machine for the first time, and I have an issue with pavucontrol. I have pipewire installed on this machine. If I select the "Output Devices" tab, and unlock the volume control for the 5.1 audio device, I see 6 controls, with these labels: Front Left, Front Right, Rear Left, Rear Right, Front Center and Subwoofer These labels seem appropriate, and as I adjust the controls the volume of the appropriate channel changes. However, if I go to the "Playback" tab, and unlock the volume control for the application (I'm trying this with VLC), I see 6 controls with the these labels: Front Left, Front Right, Side Left, Side Right, Front Center and Subwoofer Those "side" labels seem like something for a 7.1 device, not a 5.1 device. As I adjust the controls they are mixed up, as follows: Front Left controls the front left channel (i.e. OK) Front right controls the front right channel(i.e. OK) Side Left controls the front centre channel Side Right controls the subwoofer channel Front Center controls the rear left channel Subwoofer controls rear right channel I'm not sure if this is a bug, or if there might be some configuration problem on my machine. Has anyone else experienced something like this? Regards, Steve

1 0

yes, another test this time for gmail - please ignore
by Frank 18 Jun '21

18 Jun '21

Switched to gmail from my provider. Please ignore -- Frank McCormick in Montreal

1 0

A question about the two package managers in fedora
by Cisco Tissera 18 Jun '21

18 Jun '21

Hello everyone, For quite random reasons, I was wondering what would happen if I completely removed yum, and only used dnf. Is it possible to do that? or would it totally break the system? Another question: why keep two package managers, and not switch to dnf and just keep dnf? Sorry if my questions might sound stupid, but I'm quite curious. Thanks for any answer. Best regards. Francisco.

6 7

how to scale Gnome to user defined percentage
by Anil F Duggirala 17 Jun '21

17 Jun '21

hello, I am struggling more than enjoying the high-DPI display on my new laptop. Gnome allows me to scale my display, to 200, 300, 400 %. Is there an easy way to scale to 250% for example? Does scaling like this in Gnome affect peformance of displaying? thank you,

2 2

sorry another test
by Frank 17 Jun '21

17 Jun '21

My provider **seems** to have fixed the problem. This is a check.

1 0

OT: diagnosing download problem
by Geoffrey Leach 16 Jun '21

16 Jun '21

Configuration: Fedora 32 with Netgear Nighthawk R7000 router talking to Hughes satellite. Problem: Connecting (only) to Amazon, (any) page hangs attempting to download (apparently) an image from images-na.ssl-images-amazon.com. Download succeeds for a dozen or so jpegs, then it hangs. Problem appears to be independent of browser (chrome, firefox) and OS (happens on (gasp) Windows 7 also). Traceroute images-na.ssl-images-amazon.com shows the round trip time to suddenlink.net around 2000 ms. So why am I bothering the list? It's Amazon's problem, after all. Question: are there any settings on my end that might be tweaked to get around the problem? Is there any way to diagnose the problem on my end? Thanks.

2 1

Easiest way to move from BTRFS to EXT4 without losing data
by Sreyan Chakravarty 16 Jun '21

16 Jun '21

Hi, BTRFS is not working out for me. What will be the easiest way to move to EXT4 ? I am on Fedora 33. Please note I also want to backup my root filesystem and not just my home. -- Regards, Sreyan Chakravarty

4 11

'managed-keys' is deprecated ??
by ToddAndMargo 15 Jun '21

15 Jun '21

Hi All, FC34 bin 9.16 Placing include "/etc/named.root.key"; in my bind.conf, give me the following error # named-checkconf -l -t /var/named/chroot /etc/named.conf /etc/named.root.key:1: option 'managed-keys' is deprecated What do I use it its place? (The Duck is failing me.) Many thanks, -T

5 8

thunderbird 78
by François Patte 15 Jun '21

15 Jun '21

Bonjour, I bupdate my fedora 32 yesterday and thunderbird 78 has been installed... So I can't get my mail!!! What is the magic to get mails with thunderbird 78? Thank you. PS. I downgraded thunderbird and the downgraded version is 68: french langpack, enigmail do not work with TB 68 -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte

3 2

Live and PlayStation 4?
by ToddAndMargo 15 Jun '21

15 Jun '21

Anyone know if you can boot up a PlayStation 4 with a Fedora Live USB stick?

4 6

remove doublets
by Patrick Dupre 14 Jun '21

14 Jun '21

Hello, I wish to remove lines which appear twice in a file, actually only when they appear more than one time. How can I do so? Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

3 2

FC34 broke my bind
by ToddAndMargo 14 Jun '21

14 Jun '21

Hi All, Just upgraded from FC33 to FC34. FC34 broke my bind. Here are "some" of the repeating errors: # named-checkzone -t /var/named/chroot/var/named/slaves xyz xyz.hosts xyz.hosts:3: ignoring out-of-zone data (xyz.local) xyz.hosts:15: ignoring out-of-zone data (DeadStick.xyz.local) 1 $ORIGIN . 2 $TTL 86400 ; 1 day 3 xyz.local IN SOA xyz.local. root\(a)rn6.xyz.local. ( 4 265 ; serial 5 10800 ; refresh (3 hours) 6 3600 ; retry (1 hour) 7 3600000 ; expire (5 weeks 6 days 16 hours) 8 86400 ; minimum (1 day) 9 ) 10 NS xyz.local. 11 A 192.168.255.10 12 MX 10 xyz.local. 13 $ORIGIN xyz.local. 14 $TTL 3600 ; 1 hour 15 DeadStick A 192.168.255.156 16 TXT "310702541c5622d0e6001136bd71a6578b" Please note this all worked perfectly under FC33 Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Serious error. All shortcuts have disappeared. Screen. Mind. Both are blank. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

6 14

Fwd: BTRFS partition corrupted after deleting files in /home
by Sreyan Chakravarty 14 Jun '21

14 Jun '21

On Thu, Jan 14, 2021 at 12:23 PM Chris Murphy <lists(a)colorremedies.com> wrote: > > > 2) Since there is a high likelihood that my filesystem is not > > completely fixed, then when I take a backup using partclone, dd or > > clonezilla won't those errors be carried over ? > > Yes. I recommend a Pika Backup for a simple GUI solution to back > things up. It doesn't have any file system specific dependencies. I'm > sure if you look through the list archive for backups or start a new > thread with your requirements you'll get more suggestions. > > > > > Even if I buy a new drive and restore the backup, I still might get > crashes. > > You definitely want a backup with its own independent file system. A > dd/ddrescue/clone is mainly for troubleshooting and disaster recovery. > It's not a great backup because a backup you want easy to keep up to > date. Daily or weekly, depending on your tolerance for loss. > Hi Chris, Resurrecting this thread after a long time. Hope you all are doing well. I mainly have some questions regarding Pika Backup and what I can do with it: 1) Can I back up my whole system using Pika/Borg Backup ? Can I install Fedora 33 on LVM(thick) and Ext4, and get back my root system as it were with Pika Backup ? 2) Or is it that I can just get back my /home directory, everything else will have to be installed and setup ? The reason I am asking these questions is because BTRFS did not work out for me. I want to go back to LVM(thick) with ext4. That gave no problems. -- Regards, Sreyan Chakravarty -- Regards, Sreyan Chakravarty

1 0

Cross domain trust RH IdM to AD RHEL OK, other linux distro problems
by thing.thing＠gmail.com 13 Jun '21

13 Jun '21

Hi, I have RH's version of freeipa (ipa-server-4.9.2-3.module+el8.4.0+10412+5ecb5b37.x86_64) working fine. RHEL8, RHEL7, Debian10.9, Ubuntu20LTS and Centos7 clients work perfectly OK to IPA OK for users in IPA.. For the cross domain trust however only RHEL8 and RHEL7 work. Debian10.9, Ubuntu20LTS and Centos7 fail for the AD user who cannot ssh in.. Is there any config I need to do to get 3rd party Linux to work with a trust? Just wondering if I have missed a package? config? steps? or does it just not work? rhel7 secure log showing success, 8><---- Jun 9 16:40:55 rhel7a sshd[9339]: pam_sss(sshd:auth): authentication success; logname= uid=0 euid=0 tty=ssh ruser= rhost=v1.ods.vuw.ac.nz user=linuxuser2(a)vuwtest.ac.nz Jun 9 16:41:04 rhel7a sshd[9336]: Accepted keyboard-interactive/pam for linuxuser2(a)vuwtest.ac.nz from 10.100.32.67 port 48 Jun 9 16:41:04 rhel7a sshd[9336]: pam_unix(sshd:session): session opened for user linuxuser2(a)vuwtest.ac.nz by (uid=0) [root@rhel7a ~]# 8><--- centos7 secure log, 8><--- [root@centos7a ~]# tail -50f /var/log/secure Jun 9 17:15:24 centos7a sshd[1812]: Invalid user linuxuser2(a)vuwtest.ac.nz from 10.100.32.67 port 53880 Jun 9 17:15:24 centos7a sshd[1812]: input_userauth_request: invalid user linuxuser2(a)vuwtest.ac.nz [preauth] Jun 9 17:15:24 centos7a sshd[1812]: Postponed keyboard-interactive for invalid user linuxuser2(a)vuwtest.ac.nz from 10.100.32.67 port 53880 ssh2 [preauth] Jun 9 17:15:35 centos7a sshd[1814]: pam_unix(sshd:auth): check pass; user unknown Jun 9 17:15:35 centos7a sshd[1814]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.100.32.67 Jun 9 17:15:37 centos7a sshd[1812]: error: PAM: User not known to the underlying authentication module for illegal user linuxuser2(a)vuwtest.ac.nz from 10.100.32.67 Jun 9 17:15:37 centos7a sshd[1812]: Failed keyboard-interactive/pam for invalid user linuxuser2(a)vuwtest.ac.nz from 10.100.32.67 port 53880 ssh2 Jun 9 17:15:37 centos7a sshd[1812]: Postponed keyboard-interactive for invalid user linuxuser2(a)vuwtest.ac.nz from 10.100.32.67 port 53880 ssh2 [preauth]

5 16

resume from sleep to a black screen
by lejeczek 13 Jun '21

13 Jun '21

Hi guys. Anybody here with similar config to mine - Ryzen 4500U in a Lenovo laptop with external monitor connected - gets black screen instead of login prompt when resume from sleep? After recent updates on f34 it started and I only can do Ctrl+Alt+Del to reboot the OS, no GUI logon. many thanks, L.

4 4

scilab
by Patrick Dupre 13 Jun '21

13 Jun '21

Hello, It seems that scilab has be withdrawn from the distribution. Is it correct? If yes, is there a reason? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

2 2

How to move panel/menu to bottom on gnome4?
by Alex 12 Jun '21

12 Jun '21

Hi, I just upgraded to f34 and now my menus are against the top of the screen and the apps are along the bottom. How do I move them all to the bottom? I've updated all the extensions that I could at extensions.gnome.org, but I don't recall which extensions perform which functions, and it appears not all of them were updated. I see plenty of references of how to move the gnome3 menus (panel?) around, but not for gnome4 - it appears this is the first release to use gnome4? I'm a long-time Linux/fedora user but just rely on the desktop working as it should, so I've tried to not have to learn how it all works, lol.

1 0

upgrate fedora34 from fedora32
by Patrick Dupre 12 Jun '21

12 Jun '21

dnf system-upgrade download --refresh --releasever=34 provides all these errors, How can I avoid to demove all these packages? Error: Problem 1: package perl-Geometry-Primitive-0.24-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-libs-4:5.30.3-461.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Geometry-Primitive-0.24-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering Problem 2: package perl-Cairo-1.109-2.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Cairo-1.107-2.fc32.x86_64 - package perl-Graphics-Color-0.31-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Cairo-1.107-2.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Graphics-Color-0.31-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 3: package perl-Cairo-GObject-1.005-5.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Cairo-GObject-1.005-2.fc32.x86_64 - package perl-Math-Function-Roots-0.065-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Cairo-GObject-1.005-2.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Math-Function-Roots-0.065-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 4: package perl-Class-Load-XS-0.10-14.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Class-Load-XS-0.10-11.fc32.x86_64 - package perl-Math-GSL-0.41-1.fc32.x86_64 requires perl(:MODULE_COMPAT_5.30.3), but none of the providers can be installed - perl-Class-Load-XS-0.10-11.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Math-GSL-0.41-1.fc32.x86_64 - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 5: package perl-Class-XSAccessor-1.19-23.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Class-XSAccessor-1.19-20.fc32.x86_64 - package perl-Math-GammaFunction-0.02-1.fc32.x86_64 requires libperl.so.5.30()(64bit), but none of the providers can be installed - package perl-Math-GammaFunction-0.02-1.fc32.x86_64 requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Class-XSAccessor-1.19-20.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Math-GammaFunction-0.02-1.fc32.x86_64 - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 6: package perl-Clone-0.45-4.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Clone-0.43-2.fc32.x86_64 - package perl-Math-Integral-Romberg-0.04-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Clone-0.43-2.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Math-Integral-Romberg-0.04-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 7: package perl-Compress-Bzip2-2.28-3.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Compress-Bzip2-2.28-1.fc32.x86_64 - package perl-Math-Random-0.72-1.fc32.x86_64 requires libperl.so.5.30()(64bit), but none of the providers can be installed - package perl-Math-Random-0.72-1.fc32.x86_64 requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Compress-Bzip2-2.28-1.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Math-Random-0.72-1.fc32.x86_64 - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 8: package perl-Compress-Raw-Bzip2-2.101-3.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Compress-Raw-Bzip2-2.093-2.fc32.x86_64 - package perl-Math-Random-Brownian-0.03-1.fc32.x86_64 requires libperl.so.5.30()(64bit), but none of the providers can be installed - package perl-Math-Random-Brownian-0.03-1.fc32.x86_64 requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Compress-Raw-Bzip2-2.093-2.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Math-Random-Brownian-0.03-1.fc32.x86_64 - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 9: package perl-Compress-Raw-Lzma-2.101-1.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Compress-Raw-Lzma-2.093-4.fc32.x86_64 - package perl-Sort-Fields-0.90-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Compress-Raw-Lzma-2.093-4.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Sort-Fields-0.90-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 10: package perl-Compress-Raw-Zlib-2.101-3.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Compress-Raw-Zlib-2.093-2.fc32.x86_64 - package perl-String-Scanf-2.1-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Compress-Raw-Zlib-2.093-2.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-String-Scanf-2.1-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 11: package perl-Cpanel-JSON-XS-4.25-2.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Cpanel-JSON-XS-4.19-1.fc32.x86_64 - package perl-Tk-JBrowseEntry-5.23-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Cpanel-JSON-XS-4.19-1.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Tk-JBrowseEntry-5.23-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 12: package perl-DBD-MySQL-4.050-10.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-DBD-MySQL-4.050-6.fc32.x86_64 - package perl-Tk-JFileDialog-2.20-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-DBD-MySQL-4.050-6.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Tk-JFileDialog-2.20-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 13: package perl-DBD-SQLite-1.66-3.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-DBD-SQLite-1.64-4.fc32.x86_64 - package perl-Tk-LineGraphDataset-0.01-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-DBD-SQLite-1.64-4.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Tk-LineGraphDataset-0.01-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 14: package perl-DBI-1.643-7.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-DBI-1.643-3.fc32.x86_64 - package perl-Tk-PlotDataset-2.05-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-DBI-1.643-3.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-Tk-PlotDataset-2.05-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 15: package perl-DB_File-1.855-2.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-DB_File-1.855-1.fc32.x86_64 - package perl-define-1.04-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-DB_File-1.855-1.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-define-1.04-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 16: package perl-Data-Dumper-2.174-460.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Data-Dumper-2.174-444.fc32.x86_64 - package perl-the-0.15-1.fc32.noarch requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Data-Dumper-2.174-444.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-the-0.15-1.fc32.noarch - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 17: package perl-Data-UUID-1.226-4.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-Data-UUID-1.224-4.fc32.x86_64 - package perl-tk-zinc-3.303-1.fc32.x86_64 requires libperl.so.5.30()(64bit), but none of the providers can be installed - package perl-tk-zinc-3.303-1.fc32.x86_64 requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-Data-UUID-1.224-4.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-tk-zinc-3.303-1.fc32.x86_64 - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering Problem 18: package perl-DateTime-2:1.54-2.fc34.x86_64 requires libperl.so.5.32()(64bit), but none of the providers can be installed - cannot install both perl-libs-4:5.32.1-475.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - cannot install both perl-libs-4:5.32.1-474.fc34.x86_64 and perl-libs-4:5.30.3-461.fc32.x86_64 - problem with installed package perl-DateTime-2:1.52-1.fc32.x86_64 - package perl-warnings-unused-0.06-1.fc32.x86_64 requires libperl.so.5.30()(64bit), but none of the providers can be installed - package perl-warnings-unused-0.06-1.fc32.x86_64 requires perl(:MODULE_COMPAT_5.30.2), but none of the providers can be installed - perl-DateTime-2:1.52-1.fc32.x86_64 does not belong to a distupgrade repository - problem with installed package perl-warnings-unused-0.06-1.fc32.x86_64 - package perl-libs-4:5.30.3-457.module_f34+11290+074a5957.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-468.module_f34+11632+21c49d06.x86_64 is filtered out by modular filtering - package perl-libs-4:5.30.3-454.module_f34+9710+aacd0f4d.x86_64 is filtered out by modular filtering - package perl-libs-4:5.32.1-467.module_f34+11257+2207b187.x86_64 is filtered out by modular filtering (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages) =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

2 1

IP-routing fails after upgrade F33->F34
by Jouk Jansen 12 Jun '21

12 Jun '21

Hi All, I'm using one of my Fedora machines as a router between 2 networks. The two network devices on the machine are called enp0s25 and tun0. On F33 it worked as expected. However, after an upgrade to F34 It looks like it does not work anymore. I tried to give the commands firewall-cmd [--permanent] --direct --add-rule ipv4 filter FORWARD 0 -o enp0s25 -i tun0 -j ACCEPT firewall-cmd [--permanent] --direct --add-rule ipv4 filter FORWARD 0 -i enp0s25 -o tun0 -j ACCEPT But had no success (not even after restarting firewalld). "firewall-cmd --list-all" gives the following: FedoraWorkstation (active) target: default icmp-block-inversion: no interfaces: enp0s25 tun0 sources: services: dhcpv6-client mountd nfs rpc-bind samba-client ssh telnet ports: 1025-65535/tcp 1025-65535/udp protocols: forward: no masquerade: yes forward-ports: source-ports: icmp-blocks: rich rules: The strange thing is that "forward" is always "no". (also the masquerade is always "no" after restarting firewalld, although it is set with --permanent, but can be set in run-time) the forwarding variable is defined: net.ipv4.conf.all.forwarding = 1 Can someone give me some hints on what I'm missing? Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

6 18

Can Someone Tell me What the Below Messages Mean
by Stephen Morris 11 Jun '21

11 Jun '21

Hi, When looking through dmsg for EDID issues I found the following messages that I have no idea what they mean. Is someone able to tell me what the BAR 13 messages are (below is just a subset of the BAR 13 messages, there are a lot more) and whether it is a problem? I am running F34 under Vmware Player. 2.130272] pci 0000:00:15.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 2.130274] pci 0000:00:0f.0: BAR 6: assigned [mem 0xc0200000-0xc0207fff pref] [ 2.130276] pci 0000:00:10.0: BAR 6: assigned [mem 0xc0208000-0xc020bfff pref] [ 2.130280] pci 0000:00:15.0: BAR 13: no space for [io size 0x1000] [ 2.130281] pci 0000:00:15.0: BAR 13: failed to assign [io size 0x1000] [ 2.130283] pci 0000:00:15.3: BAR 13: no space for [io size 0x1000] [ 2.130284] pci 0000:00:15.3: BAR 13: failed to assign [io size 0x1000] [ regards, Steve

3 3

rsync and compression question
by ToddAndMargo 10 Jun '21

10 Jun '21

Hi All, Looking over https://stackoverflow.com/questions/43624832/rsync-compression-and-how-it-w… I am not sure what I am reading. What I would like to do with rsync is as follows: I would like to have a master directory on a local drive that is uncompressed. I want to do a one way sync to a backup flash drive to update any changed files. The job will go off in the middle of the night, so speed is not an issue. Now the fun part: I would like the files on the backup flash drive to be compressed. Do I lose my file comparison feature? Can I do this? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When we ask for advice, we are usually looking for an accomplice. -- Charles Varlet de La Grange ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

4 4

module openmpi-x86_64
by Patrick Dupre 10 Jun '21

10 Jun '21

Hello, I am supposed to run module load openmpi-x86_64 ERROR: Unable to locate a modulefile for 'openmpi-x86_64' openmpi openmpi-devel ga-openmpi-deve ga-openmpi are installed What am I supposed to do? Thanks. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

3 4

messages during dfn update
by Robert McBroom 10 Jun '21

10 Jun '21

Getting strange messages during an update. /usr/lib/tmpfiles.d/kdm.conf:1: Line references path below legacy directory /var/run/, updating /var/run/kdm/ → /run/kdm/; please update the tmpfiles.d/ drop-in file accordingly. /usr/lib/tmpfiles.d/kdm.conf:2: Line references path below legacy directory /var/run/, updating /var/run/xdmctl → /run/xdmctl; please update the tmpfiles.d/ drop-in file accordingly. What do these mean and how can they be fixed?

4 3

mpi-default-bin
by Patrick Dupre 10 Jun '21

10 Jun '21

Hello, I am looking for mpi-default-bin and mpi-default-dev for fedora These packages are available for ubuntu and debian. What do you suggest? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

2 1

Millions of temp files in .gnome2/keyrings
by Meikel 09 Jun '21

09 Jun '21

Hi folks, I have a problem with Gnome-Keyrings, my filesystem seems to be flooded by millions of *.keyring.temp-* files in directory .gnome2/keyrings. I have a home server (CentOS 8) where the files are located. On my workstation (Fedora 33 XFCE Spin) I mount it via autofs and sshfs into the /home-Directory. I do not have a good understanding of what Gnome Keyrings does, but in my eyes I have a "standard" installation, I can' t remember that I did something that brought it onto my workstation, I expect that Gnome Keyring was already there after the initial installation of the workstation. Because the file system on the workstation is mounted from a server my problem might be caused by any restrictions on the server (i.e. SELinux or whatever), but because it is mounted via sshfs I expect that the server is "innocent" as far as an ssh from the workstation to the server works. For that reason I post to the Fedora mailing list. I did some investigation that shows, that at probably random points in time each time 64999 temp files are create in .gnome2/keyrings, so after some minutes I have millions of files there. Following my analysis. Workstation: The OS version is cat /etc/redhat-release Fedora release 33 (Thirty Three) and just for completeness, but probably not important, the XFCE version is xfce4-about -V xfce4-about 4.14.1 (Xfce 4.14) ... SSH from workstation to server works fine ssh sysadmin@server3 "ls -d ~/disk1/home_meikel" /home/sysadmin/disk1/home_meikel and the file system is mounted LANG="" df -h /home/meikel Filesystem Size Used Avail Use% Mounted on sysadmin@server3:/home/sysadmin/disk1/home_meikel/ 1007G 747G 210G 79% /home/meikel After some minutes/hours of working on the workstation the directory .gnome2/keyrings/ seems to be flooded by hundred of thousands of temp files, the directory listing takes about one and a half minute (!!!): cd /home/meikel time ls -l .gnome2/keyrings/ | wc -l 247263 real 1m28,358s user 0m4,642s sys 0m3,831s Home-Server (via ssh): The OS version is cat /etc/redhat-release CentOS Linux release 8.4.2105 After some time (this example was taken during the same day, some hours later) the situation is the same, meanwhile there are some millions of temp files: cd /home/sysadmin/disk1/home_meikel/.gnome2/keyrings/ time ls -l | wc -l 2804719 real 0m49,023s user 0m27,330s sys 0m22,120s Further investigation: To understand what are those millions of files I did a ls -l .gnome2/keyrings/ > /tmp/gnome-keyrings-3.txt and some further manually investigation. Following I give the beginning of /tmp/gnome-keyrings-3.txt where I manually replaced multiple occurrences of the same line by "--> xxx times". There seems to be a pattern where in each point of time it tries for 64999 times to create a temp file: total 10438868 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 20:39 Trousseau_de_clés_par_défaut_9.keyring.temp-1000041255 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 20:39 --> 64997 times -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 20:39 Trousseau_de_clés_par_défaut_9.keyring.temp-1000072888 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 19:35 Trousseau_de_clés_par_défaut_9.keyring.temp-100000967 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 19:35 --> 64997 times -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 19:35 Trousseau_de_clés_par_défaut_9.keyring.temp-1000037381 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 19:32 Trousseau_de_clés_par_défaut_9.keyring.temp-1000014039 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 19:32 --> 64997 times -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 19:32 Trousseau_de_clés_par_défaut_9.keyring.temp-1000058050 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 18:42 Trousseau_de_clés_par_défaut_9.keyring.temp-1000006582 -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 18:42 --> 64997 times -rw-------. 64999 sysadmin sysadmin 1162 Jun 5 18:42 Trousseau_de_clés_par_défaut_9.keyring.temp-1000149586 ... many more ... The word "Trousseau_de_clés_par_défaut" (it is french) means something like "default keyring". To find a pattern in the timestamps to understand when those temp files are created I ran cut -c 42-53 gnome-keyrings-3.txt | sort | uniq Jun 2 07:28 ... Jun 5 10:52 ... May 22 08:12 ... May 28 08:35 but due to the "sort" the result is now unsorted (!!!), there is a break in the sorting between June and May. I' m not sure if I really need to sort before uniq-ify the output. As it' s a result of "ls -l" it might already be sorted by timestamp. However I need a further step to sort output by timestamp, so I ran cut -c 42-53 gnome-keyrings-3.txt | sort | uniq | while read d ; do date +%s -d "${d}" ; done | sort | while read d ; do date -d @${d} ; done sam. 22 mai 2021 08:12:00 CEST sam. 22 mai 2021 08:21:00 CEST sam. 22 mai 2021 13:45:00 CEST dim. 23 mai 2021 09:18:00 CEST mar. 25 mai 2021 07:44:00 CEST mar. 25 mai 2021 07:59:00 CEST mar. 25 mai 2021 08:06:00 CEST mer. 26 mai 2021 07:43:00 CEST jeu. 27 mai 2021 07:45:00 CEST jeu. 27 mai 2021 08:22:00 CEST ven. 28 mai 2021 08:34:00 CEST ven. 28 mai 2021 08:35:00 CEST mer. 02 juin 2021 07:28:00 CEST mer. 02 juin 2021 07:31:00 CEST mer. 02 juin 2021 07:42:00 CEST mer. 02 juin 2021 07:47:00 CEST mer. 02 juin 2021 07:49:00 CEST sam. 05 juin 2021 10:52:00 CEST sam. 05 juin 2021 10:56:00 CEST sam. 05 juin 2021 10:57:00 CEST sam. 05 juin 2021 11:00:00 CEST sam. 05 juin 2021 11:04:00 CEST sam. 05 juin 2021 11:07:00 CEST sam. 05 juin 2021 11:11:00 CEST sam. 05 juin 2021 11:14:00 CEST sam. 05 juin 2021 11:19:00 CEST sam. 05 juin 2021 11:22:00 CEST sam. 05 juin 2021 11:28:00 CEST sam. 05 juin 2021 11:32:00 CEST sam. 05 juin 2021 11:40:00 CEST sam. 05 juin 2021 11:43:00 CEST sam. 05 juin 2021 11:53:00 CEST sam. 05 juin 2021 11:56:00 CEST sam. 05 juin 2021 12:09:00 CEST sam. 05 juin 2021 12:12:00 CEST sam. 05 juin 2021 12:27:00 CEST sam. 05 juin 2021 12:30:00 CEST sam. 05 juin 2021 12:47:00 CEST sam. 05 juin 2021 12:50:00 CEST sam. 05 juin 2021 13:11:00 CEST sam. 05 juin 2021 13:14:00 CEST sam. 05 juin 2021 13:38:00 CEST sam. 05 juin 2021 13:41:00 CEST sam. 05 juin 2021 14:09:00 CEST sam. 05 juin 2021 14:12:00 CEST sam. 05 juin 2021 14:40:00 CEST sam. 05 juin 2021 14:43:00 CEST sam. 05 juin 2021 15:22:00 CEST sam. 05 juin 2021 15:25:00 CEST sam. 05 juin 2021 16:01:00 CEST sam. 05 juin 2021 16:04:00 CEST sam. 05 juin 2021 16:49:00 CEST sam. 05 juin 2021 16:51:00 CEST sam. 05 juin 2021 17:41:00 CEST sam. 05 juin 2021 17:44:00 CEST sam. 05 juin 2021 18:38:00 CEST sam. 05 juin 2021 18:42:00 CEST sam. 05 juin 2021 19:32:00 CEST sam. 05 juin 2021 19:35:00 CEST sam. 05 juin 2021 20:39:00 CEST So at each of these timestamps the number of 64999 temp files is created in .gnome2/keyrings. I can't see any pattern in those points of time, I don't understand for what reason there need to be created the temp files at theses times and why always 64999 times at the same moment. From time to time I manually delete the files by running (as root) find . -name "*.temp-*" -delete which is not really satisfying. Any ideas what is the reason that these millions of temp files are created? Why do I need Gnome Keyrings? Can I get rid of that software to solve the problem? Regards, Meikel

5 9

Persistent mdev configuration
by Danishka Navin 09 Jun '21

09 Jun '21

Is it possible to add persistent mdev config? Regards, Danishka

1 0

Firefox 89?
by Neal Becker 08 Jun '21

08 Jun '21

I've been reading about firefox 89 and wanted to check it out. I'm on F34. Doesn't seem to be in updates-testing. Let's try rawhide: sudo dnf --enablerepo=rawhide update firefox I Dependencies resolved. ================================================================================================= Package Architecture Version Repository Size ================================================================================================= Upgrading: firefox x86_64 89.0-1.fc35 rawhide 103 M Transaction Summary ================================================================================================= Upgrade 1 Package Total download size: 103 M Is this ok [y/N]: y Downloading Packages: firefox-89.0-1.fc35.x86_64.rpm 6.0 MB/s | 103 MB 00:17 ------------------------------------------------------------------------------------------------- Total 5.9 MB/s | 103 MB 00:17 warning: /var/cache/dnf/rawhide-2d95c80a1fa0a67d/packages/firefox-89.0-1.fc35.x86_64.rpm: Header V4 RSA/SHA256 Signature, key ID 9867c58f: NOKEY Fedora - Rawhide - Developmental packages for the next Fedora re 796 kB/s | 1.6 kB 00:00 GPG key at file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-34-x86_64 (0x45719A39) is already installed Fedora - Rawhide - Developmental packages for the next Fedora re 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0x38AB71F4: Userid : "Fedora (36) <fedora-36-primary(a)fedoraproject.org>" Fingerprint: 53DE D2CB 922D 8B8D 9E63 FD18 999F 7CBF 38AB 71F4 From : /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-36-x86_64 Is this ok [y/N]: y Key imported successfully Import of key(s) didn't help, wrong key(s)? Public key for firefox-89.0-1.fc35.x86_64.rpm is not installed. Failing package is: firefox-89.0-1.fc35.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-34-x86_64, file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-36-x86_64 The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'dnf clean packages'. Error: GPG check FAILED I don't think I want to install if gpg check failed.

4 6

off-topic mouse question
by Tim 08 Jun '21

08 Jun '21

Does anybody know of a mouse with a scroll wheel that's not rubber coated? I have a latex allergy, getting really sick of the skin irritation, and I'm not having a great deal of luck researching this. Most mice don't state what they're made of. Yes, I do want a scroll wheel mouse and not a trackball. They have their purposes, but don't suit what I generally want to do. -- uname -rsvp Linux 3.10.0-1160.25.1.el7.x86_64 #1 SMP Wed Apr 28 21:49:45 UTC 2021 x86_64 Boilerplate: All unexpected mail to my mailbox is automatically deleted. I will only get to see the messages that are posted to the mailing list.

4 3

first axfr challenges
by Jack Craig 08 Jun '21

08 Jun '21

*i am getting a notauth on my axfr attempt. what i am not seeing is an A ip# for the secondary dns server.* *is this missing A record a problem i need to fix for following host cli???* *dig @ws.linuxlighthouse.com <http://ws.linuxlighthouse.com> axfr linuxlighthouse.com <http://linuxlighthouse.com>* ; <<>> DiG 9.11.28-RedHat-9.11.28-1.fc32 <<>> @ws.linuxlighthouse.com axfr linuxlighthouse.com ; (1 server found) ;; global options: +cmd linuxlighthouse.com. 259200 IN SOA ws.linuxlighthouse.com. root.linuxlighthouse.com. 2021051603 86400 7200 3600000 172800 linuxlighthouse.com. 259200 IN A 108.220.213.121 linuxlighthouse.com. 259200 IN CAA 0 issue "letsencrypt.org" linuxlighthouse.com. 259200 IN NS ws.linuxlighthouse.com. *linuxlighthouse.com <http://linuxlighthouse.com>. 259200 IN NS ns2.swbell.net <http://ns2.swbell.net>.* ws.linuxlighthouse.com. 259200 IN A 108.220.213.121 www.linuxlighthouse.com. 259200 IN A 108.220.213.121 linuxlighthouse.com. 259200 IN SOA ws.linuxlighthouse.com. root.linuxlighthouse.com. 2021051603 86400 7200 3600000 172800 ;; Query time: 1 msec ;; SERVER: 108.220.213.121#53(108.220.213.121) ;; WHEN: Mon May 17 12:43:43 PDT 2021 ;; XFR size: 8 records (messages 1, bytes 284) *[jackc@ws ~ $ host -t axfr ns2.swbell.net <http://ns2.swbell.net> ws.linuxlighthouse.com <http://ws.linuxlighthouse.com>* Trying "ns2.swbell.net" Using domain server: Name: ws.linuxlighthouse.com Address: 108.220.213.121#53 Aliases: Host ns2.swbell.net not found: 9(NOTAUTH) ; Transfer failed. [jackc@ws ~ $

5 13

Speaking of log spamming, I see nmb spam
by Tom Horsley 07 Jun '21

07 Jun '21

Checking for spam from NM, I instead found this nonsense: Jun 6 00:01:19 zooty nmbd[2999]: [2021/06/06 00:01:19.675514, 0] ../../source3/libsmb/nmblib.c:923(send_udp) Jun 6 00:01:19 zooty nmbd[2999]: Packet send failed to 192.168.2.255(137) ERRNO=Operation not permitted That 192.168.2 network isn't really there, it is a bridge setup that has nothing connected except for some special virtual machines that sometimes use it but are almost never running. So I found the interfaces config options for smb.conf and made those messages stop, but the web is full of info telling me I no longer need netbios on Windows 10, yet when I stop the nmb service, my Windows 10 virtual machine cannot mount the shares it normally mounts from my fedora box. Anyone know if it is really possible to get rid of nmb? (The only systems mounting shares are windows 10.)

1 2

remove unallocated partition
by Patrick Dupre 07 Jun '21

07 Jun '21

Hello, On one disk, I have an extended partition (sdc4) starting at 41338880 Inside, I have a ext4 partition (sdc5) starting at 53919744 (see attached file) In between the space is unallocated How can I make that the partition sdc4 starts just at the beginning of sdc5 Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

3 4

network manager spamming logs with repetitive messages
by Frank 07 Jun '21

07 Jun '21

I noticed this morning that network manager is spamming my log with messages repeated every 3 or 4 seconds. Jun 06 11:58:22 localhost.localdomain NetworkManager[787]: <info> [1622995102.8297] policy: set-hostname: current hostname was changed outside NetworkManager: fedora Jun 06 11:58:22 localhost.localdomain NetworkManager[787]: <info> [1622995102.8299] policy: set-hostname: set hostname to localhost.localdomain (from address lookup) It repeats these messages every 3 or 4 seconds. This apparently has been going on for a few days at least. There is a bug 1894137 - But it was filed last November. Anyone have any suggestions ?

4 10

Troubles with the claws-mail
by Bob Marcan 06 Jun '21

06 Jun '21

Fedora 33 up to date (Sun Jun 6 11:47:43 CEST 2021) claws-mail-3.17.8-1.fc33.x86_64) In claws-mail keyboard key "k" is ignored. Same key is working in all other applications. So it is not a keyboard problem. :-) Does anybody have an idea where is the problem? TIA, Bob

5 9

rpmdb --rebuilddb
by Patrick Dupre 06 Jun '21

06 Jun '21

Hello, After updatding from fedora32 to fedora34, I could not run dnf update Then, I tried rpmdb --rebuilddb and I get warning: Converting database from bdb_ro to sqlite backend error: could not open /var/lib/rpm/Packages: Permission denied error: cannot open Packages index using bdb_ro - Operation not permitted (1) What should I do? Thanks =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

4 3

issue before update
by Patrick Dupre 06 Jun '21

06 Jun '21

Hello, I planed to update a multiboot machine (all fedora 32) The "regular" machine is installed on sda4 with /boot/efi on sda3 Thus, I first updated a minimum distribution booting on sdc3 But, I did not have enough room on /boot Hence, I made a rpm -e kernel-core-5.0.16-100.fc28.x86_64 because I did not understand why there was still a fc28 on this distribution. At the reboot, I could not boot properly on any kernel. Finally, I was able to boot on sdc3 with an old kernel 5.7.6-201.fc32.x86_64 I run grub2-mkconfig -o /boot/grub2/grub.cfg and tried grub2-install /dev/sda But grub2-install: error: /usr/lib/grub/x86_64-efi/modinfo.sh doesn't exist. Please specify --target or --directory. Checking: /usr/lib/grub/x86_64-efi is not installed no grub2-efi packages on this machine grub2-efi-x64, grub2-efi-x64-modules are installed on the "regular" machine What do you suggest? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

2 2

firefox and xinerama
by Bob Marcan 06 Jun '21

06 Jun '21

Fedora 33 firefox-88.0.1-1.fc33.x86_64 Window manager is fvwm. [~]$ xrandr Screen 0: minimum 320 x 200, current 3520 x 1080, maximum 8192 x 8192 LVDS-1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 215mm 1600x900 60.01*+ 59.99 59.94 59.95 59.82 ... VGA-1 connected 1920x1080+1600+0 (normal left inverted right x axis y axis) 509mm x 286mm 1920x1080 60.00*+ ... xrandr --output VGA-1 --primary xrandr Screen 0: minimum 320 x 200, current 3520 x 1080, maximum 8192 x 8192 LVDS-1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 215mm 1600x900 60.01*+ 59.99 59.94 59.95 59.82 ... VGA-1 connected primary 1920x1080+1600+0 (normal left inverted right x axis y axis) 509mm x 286mm 1920x1080 60.00*+ ... palemoon browser stays on screen where is launched. New window opens on the same screen. firefox always opens on LVDS-1, even when is launched on VGA-1. After moving the window to VGA-1, new window again appears on LVDS-1. No matter if the screen is primary or not. Any clue? TIA, Bob

1 0

does rescue kernel ever update
by Jon LaBadie 04 Jun '21

04 Jun '21

On my 3 systems, F34, F34, and CentOS7, they are 1, 2, and 6 years old respectively. Are old rescue kernels still useful? (6 years?) Are there automated or manual procedures to update a rescue kernel? Are there best practices for rescue kernel update? If there are, I've missed them. -- Jon H. LaBadie jonfu(a)jgcomp.com

12 19

bash command
by Patrick Dupre 04 Jun '21

04 Jun '21

Hello, Sorry, I am a bit of list This command line works in a shell, but not in a bash I may miss some quotes ! Thanks for your help. /usr/bin/rm -v !(ZMAT*|out*|Out*|GENBAS|Note*) =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 | | Room# D114A ===========================================================================

10 18

Looking for FSlint
by Robert McBroom 03 Jun '21

03 Jun '21

The utility FSlint has many of the attributes for scanning the dust bunnies out of my drives. It doesn't seem to available of Fedora anymore. Did it just lose a maintainer or be declared too hazardous to use?

3 2

CentOS 6 Client installation stuck and don't complete
by Rohan Talkar 03 Jun '21

03 Jun '21

HI Team, We are migrating from our current Directory Service 389DS to FreeIPA. Our all servers at present authenticated by 389DS server. Our infra hosted on AWS cloud. Please find below setup of FreeIPA & Client on which we are performing tests & getting issue. FreeIPA Servers Primary Master Server = Region 1 Secondary Master Server = Region 2 OS = CentOS Linux release 8.3.2011 IPA Version = 4.8.7, API_VERSION: 2.239 FreeIPA Client OS = CentOS release 6.9 (Final) Kernel Version = Linux drxlceco6app01 2.6.32-696.1.1.el6.x86_64 #1 SMP Tue Apr 11 17:13:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux IPA Client version = 3.0.0-51.el6.centos Our DNS getting managed from "/etc/hosts" file by manually adding DNS entries of server. On centos 6 client installation gets stuck after SSSD setup completes. Below output for details. NOTE = For security reason we have masked our Domain nme to "XYZ.com" & other details with Capital "X". ======================================== case "$env" in echo 'This is US DR' This is US DR ++ hostname ipa-client-install --mkhomedir --no-krb5-offline-passwords --hostname=drxlceco6app01.XYZ.com --force-join --fixed-primary --server=drxipaco8lds01.XYZ.com --server=prdipaco8ldm01.XYZ.com --domain XYZ.com --realm XYZ.COM Autodiscovery of servers for failover cannot work with this configuration. If you proceed with the installation, services will be configured to always access the discovered server for all operations and will not fail over to other servers in case of failure. Proceed with fixed values and no DNS discovery? [no]: yes Hostname: drxlceco6app01.XYZ.com Realm: XYZ.COM DNS Domain: XYZ.com IPA Server: prdipaco8ldm01.XYZ.com, drxipaco8lds01.XYZ.com BaseDN: dc=XYZ,dc=com Continue to configure the system with these values? [no]: yes User authorized to enroll computers: admin Synchronizing time with KDC... Unable to sync time with IPA NTP server, assuming the time is in sync. Please check that 123 UDP port is opened. Password for admin(a)XYZ.COM: Successfully retrieved CA cert Subject: CN=Certificate Authority,O=XYZ.COM Issuer: CN=Certificate Authority,O=XYZ.COM Valid From: Mon Apr 19 14:35:38 2021 UTC Valid Until: Fri Apr 19 14:35:38 2041 UTC Enrolled in IPA realm XYZ.COM Attempting to get host TGT... Created /etc/ipa/default.conf New SSSD config will be created Configured sudoers in /etc/nsswitch.conf Configured /etc/sssd/sssd.conf Configured /etc/krb5.conf for IPA realm XYZ.COM trying https://prdipaco8ldm01.XYZ.com/ipa/xml Forwarding 'env' to server u'https://prdipaco8ldm01.XYZ.com/ipa/xml' Hostname (drxlceco6app01.XYZ.com) not found in DNS Failed to update DNS records. Adding SSH public key from /etc/ssh/ssh_host_rsa_key.pub Forwarding 'host_mod' to server u'https://prdipaco8ldm01.XYZ.com/ipa/xml' Could not update DNS SSHFP records. SSSD enabled Configuring XYZ.com as NIS domain ======================================== Current /etc/nsswitch.conf entries as below. ======================================== passwd: files ldap shadow: files ldap group: files ldap hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: nisplus publickey: nisplus automount: files nisplus aliases: files nisplus ======================================== Complete client installation logs as below. ======================================== 2021-06-01T17:25:40Z DEBUG /usr/sbin/ipa-client-install was invoked with options: {'domain': 'XYZ.com', 'force': False, 'realm_name': 'XYZ.COM', 'krb5_offline_passwords': False, 'primary': True, 'mkhomedir': True, 'create_sshfp': True, 'conf_sshd': True, 'conf_ntp': True, 'on_master': False, 'ntp_server': None, 'nisdomain': None, 'no_nisdomain': False, 'principal': None, 'hostname': 'drxlceco6app01.XYZ.com', 'no_ac': False, 'unattended': None, 'sssd': True, 'trust_sshfp': False, 'kinit_attempts': 5, 'dns_updates': False, 'conf_sudo': True, 'conf_ssh': True, 'force_join': True, 'ca_cert_file': None, 'server': ['drxipaco8lds01.XYZ.com', 'prdipaco8ldm01.XYZ.com'], 'prompt_password': False, 'permit': False, 'debug': False, 'preserve_sssd': False, 'uninstall': False} 2021-06-01T17:25:40Z DEBUG missing options might be asked for interactively later 2021-06-01T17:25:40Z DEBUG Loading Index file from '/var/lib/ipa-client/sysrestore/sysrestore.index' 2021-06-01T17:25:40Z DEBUG Loading StateFile from '/var/lib/ipa-client/sysrestore/sysrestore.state' 2021-06-01T17:25:40Z DEBUG [IPA Discovery] 2021-06-01T17:25:40Z DEBUG Starting IPA discovery with domain=XYZ.com, servers=['drxipaco8lds01.XYZ.com', 'prdipaco8ldm01.XYZ.com'], hostname=drxlceco6app01.XYZ.com 2021-06-01T17:25:40Z DEBUG Server and domain forced 2021-06-01T17:25:40Z DEBUG [Kerberos realm search] 2021-06-01T17:25:40Z DEBUG Kerberos realm forced 2021-06-01T17:25:40Z DEBUG Search DNS for SRV record of _kerberos._udp.XYZ.com. 2021-06-01T17:25:40Z DEBUG No DNS record found 2021-06-01T17:25:40Z DEBUG SRV record for KDC not found! Domain: XYZ.com 2021-06-01T17:25:40Z DEBUG [LDAP server check] 2021-06-01T17:25:40Z DEBUG Verifying that drxipaco8lds01.XYZ.com (realm XYZ.COM) is an IPA server 2021-06-01T17:25:40Z DEBUG Init LDAP connection with: ldap://drxipaco8lds01.XYZ.com:389 2021-06-01T17:25:40Z DEBUG Search LDAP server for IPA base DN 2021-06-01T17:25:40Z DEBUG Check if naming context 'dc=XYZ,dc=com' is for IPA 2021-06-01T17:25:40Z DEBUG LDAP Error: Anonymous access not allowed 2021-06-01T17:25:40Z DEBUG Verifying that prdipaco8ldm01.XYZ.com (realm XYZ.COM) is an IPA server 2021-06-01T17:25:40Z DEBUG Init LDAP connection with: ldap://prdipaco8ldm01.XYZ.com:389 2021-06-01T17:25:40Z DEBUG Search LDAP server for IPA base DN 2021-06-01T17:25:40Z DEBUG Check if naming context 'dc=XYZ,dc=com' is for IPA 2021-06-01T17:25:40Z DEBUG LDAP Error: Anonymous access not allowed 2021-06-01T17:25:40Z DEBUG Generated basedn from realm: dc=XYZ,dc=com 2021-06-01T17:25:40Z DEBUG Discovery result: NO_ACCESS_TO_LDAP; server=None, domain=XYZ.com, kdc=None, basedn=dc=XYZ,dc=com 2021-06-01T17:25:40Z DEBUG Validated servers: prdipaco8ldm01.XYZ.com,drxipaco8lds01.XYZ.com 2021-06-01T17:25:40Z DEBUG will use discovered domain: XYZ.com 2021-06-01T17:25:40Z DEBUG Using servers from command line, disabling DNS discovery 2021-06-01T17:25:40Z DEBUG will use provided server: drxipaco8lds01.XYZ.com, prdipaco8ldm01.XYZ.com 2021-06-01T17:25:40Z INFO Autodiscovery of servers for failover cannot work with this configuration. 2021-06-01T17:25:40Z INFO If you proceed with the installation, services will be configured to always access the discovered server for all operations and will not fail over to other servers in case of failure. 2021-06-01T17:26:20Z DEBUG will use discovered realm: XYZ.COM 2021-06-01T17:26:20Z DEBUG will use discovered basedn: dc=XYZ,dc=com 2021-06-01T17:26:20Z INFO Hostname: drxlceco6app01.XYZ.com 2021-06-01T17:26:20Z DEBUG Hostname source: Provided as option 2021-06-01T17:26:20Z INFO Realm: XYZ.COM 2021-06-01T17:26:20Z DEBUG Realm source: Forced 2021-06-01T17:26:20Z INFO DNS Domain: XYZ.com 2021-06-01T17:26:20Z DEBUG DNS Domain source: Forced 2021-06-01T17:26:20Z INFO IPA Server: prdipaco8ldm01.XYZ.com, drxipaco8lds01.XYZ.com 2021-06-01T17:26:20Z DEBUG IPA Server source: Provided as option 2021-06-01T17:26:20Z INFO BaseDN: dc=XYZ,dc=com 2021-06-01T17:26:20Z DEBUG BaseDN source: Generated from Kerberos realm 2021-06-01T17:26:45Z DEBUG args=/usr/sbin/ipa-rmkeytab -k /etc/krb5.keytab -r XYZ.COM 2021-06-01T17:26:45Z DEBUG stdout= 2021-06-01T17:26:45Z DEBUG stderr=Failed to open keytab '/etc/krb5.keytab': No such file or directory 2021-06-01T17:26:45Z DEBUG args=/bin/hostname drxlceco6app01.XYZ.com 2021-06-01T17:26:45Z DEBUG stdout= 2021-06-01T17:26:45Z DEBUG stderr= 2021-06-01T17:26:45Z DEBUG Backing up system configuration file '/etc/sysconfig/network' 2021-06-01T17:26:45Z DEBUG Saving Index File to '/var/lib/ipa-client/sysrestore/sysrestore.index' 2021-06-01T17:26:45Z DEBUG args=/usr/sbin/selinuxenabled 2021-06-01T17:26:45Z DEBUG stdout= 2021-06-01T17:26:45Z DEBUG stderr= 2021-06-01T17:26:45Z DEBUG Saving StateFile to '/var/lib/ipa-client/sysrestore/sysrestore.state' 2021-06-01T17:26:51Z DEBUG will use principal provided as option: admin 2021-06-01T17:26:51Z INFO Synchronizing time with KDC... 2021-06-01T17:26:51Z DEBUG Search DNS for SRV record of _ntp._udp.XYZ.com. 2021-06-01T17:26:51Z DEBUG No DNS record found 2021-06-01T17:26:55Z DEBUG args=/usr/sbin/ntpdate -U ntp -s -b -v prdipaco8ldm01.XYZ.com 2021-06-01T17:26:55Z DEBUG stdout= 2021-06-01T17:26:55Z DEBUG stderr= 2021-06-01T17:26:59Z DEBUG args=/usr/sbin/ntpdate -U ntp -s -b -v prdipaco8ldm01.XYZ.com 2021-06-01T17:26:59Z DEBUG stdout= 2021-06-01T17:26:59Z DEBUG stderr= 2021-06-01T17:27:03Z DEBUG args=/usr/sbin/ntpdate -U ntp -s -b -v prdipaco8ldm01.XYZ.com 2021-06-01T17:27:03Z DEBUG stdout= 2021-06-01T17:27:03Z DEBUG stderr= 2021-06-01T17:27:03Z WARNING Unable to sync time with IPA NTP server, assuming the time is in sync. Please check that 123 UDP port is opened. 2021-06-01T17:27:03Z DEBUG Writing Kerberos configuration to /tmp/tmpGWIbHp: 2021-06-01T17:27:03Z DEBUG #File modified by ipa-client-install includedir /var/lib/sss/pubconf/krb5.include.d/ [libdefaults] default_realm = XYZ.COM dns_lookup_realm = false dns_lookup_kdc = false rdns = false ticket_lifetime = 24h forwardable = yes udp_preference_limit = 0 [realms] XYZ.COM = { kdc = prdipaco8ldm01.XYZ.com:88 master_kdc = prdipaco8ldm01.XYZ.com:88 admin_server = prdipaco8ldm01.XYZ.com:749 kdc = drxipaco8lds01.XYZ.com:88 master_kdc = drxipaco8lds01.XYZ.com:88 admin_server = drxipaco8lds01.XYZ.com:749 default_domain = XYZ.com pkinit_anchors = FILE:/etc/ipa/ca.crt } [domain_realm] .XYZ.com = XYZ.COM XYZ.com = XYZ.COM 2021-06-01T17:27:07Z DEBUG args=kinit admin(a)XYZ.COM 2021-06-01T17:27:07Z DEBUG stdout=Password for admin(a)XYZ.COM: 2021-06-01T17:27:07Z DEBUG stderr= 2021-06-01T17:27:07Z DEBUG trying to retrieve CA cert via LDAP from ldap://prdipaco8ldm01.XYZ.com 2021-06-01T17:27:07Z INFO Successfully retrieved CA cert Subject: CN=Certificate Authority,O=XYZ.COM Issuer: CN=Certificate Authority,O=XYZ.COM Valid From: Mon Apr 19 14:35:38 2021 UTC Valid Until: Fri Apr 19 14:35:38 2041 UTC 2021-06-01T17:27:08Z DEBUG args=/usr/sbin/ipa-join -s prdipaco8ldm01.XYZ.com -b dc=XYZ,dc=com -h drxlceco6app01.XYZ.com -f 2021-06-01T17:27:08Z DEBUG stdout= 2021-06-01T17:27:08Z DEBUG stderr=Failed to retrieve encryption type Triple DES cbc mode with HMAC/sha1 (#16) Failed to retrieve encryption type ArcFour with HMAC/md5 (#23) Keytab successfully retrieved and stored in: /etc/krb5.keytab Certificate subject base is: O=XYZ.COM 2021-06-01T17:27:08Z INFO Enrolled in IPA realm XYZ.COM 2021-06-01T17:27:08Z DEBUG args=kdestroy 2021-06-01T17:27:08Z DEBUG stdout= 2021-06-01T17:27:08Z DEBUG stderr= 2021-06-01T17:27:08Z INFO Attempting to get host TGT... 2021-06-01T17:27:08Z DEBUG args=/usr/bin/kinit -k -t /etc/krb5.keytab host/drxlceco6app01.XYZ.com(a)XYZ.COM 2021-06-01T17:27:08Z DEBUG stdout= 2021-06-01T17:27:08Z DEBUG stderr= 2021-06-01T17:27:08Z DEBUG Attempt 1/5 succeeded. 2021-06-01T17:27:08Z DEBUG Backing up system configuration file '/etc/ipa/default.conf' 2021-06-01T17:27:08Z DEBUG -> Not backing up - '/etc/ipa/default.conf' doesn't exist 2021-06-01T17:27:08Z INFO Created /etc/ipa/default.conf 2021-06-01T17:27:08Z DEBUG importing all plugin modules in '/usr/lib/python2.6/site-packages/ipalib/plugins'... 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/aci.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/automember.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/automount.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/baseldap.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/batch.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/cert.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/config.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/delegation.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/dns.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/group.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/hbacrule.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/hbacsvc.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/hbacsvcgroup.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/hbactest.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/host.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/hostgroup.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/idrange.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/internal.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/kerberos.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/krbtpolicy.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/migration.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/misc.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/netgroup.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/passwd.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/permission.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/ping.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/privilege.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/pwpolicy.py' 2021-06-01T17:27:08Z DEBUG args=klist -V 2021-06-01T17:27:08Z DEBUG stdout=Kerberos 5 version 1.10.3 2021-06-01T17:27:08Z DEBUG stderr= 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/role.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/selfservice.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/selinuxusermap.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/service.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/sudocmd.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/sudocmdgroup.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/sudorule.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/trust.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/user.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/virtual.py' 2021-06-01T17:27:08Z DEBUG importing plugin module '/usr/lib/python2.6/site-packages/ipalib/plugins/xmlclient.py' 2021-06-01T17:27:09Z DEBUG Backing up system configuration file '/etc/sssd/sssd.conf' 2021-06-01T17:27:09Z DEBUG -> Not backing up - '/etc/sssd/sssd.conf' doesn't exist 2021-06-01T17:27:09Z INFO New SSSD config will be created 2021-06-01T17:27:09Z DEBUG Backing up system configuration file '/etc/nsswitch.conf' 2021-06-01T17:27:09Z DEBUG Saving Index File to '/var/lib/ipa-client/sysrestore/sysrestore.index' 2021-06-01T17:27:09Z INFO Configured sudoers in /etc/nsswitch.conf 2021-06-01T17:27:09Z INFO Configured /etc/sssd/sssd.conf 2021-06-01T17:27:09Z DEBUG args=/usr/bin/certutil -A -d /etc/pki/nssdb -n IPA CA -t CT,C,C -a -i /etc/ipa/ca.crt 2021-06-01T17:27:09Z DEBUG stdout= 2021-06-01T17:27:09Z DEBUG stderr= 2021-06-01T17:27:09Z DEBUG Backing up system configuration file '/etc/krb5.conf' 2021-06-01T17:27:09Z DEBUG Saving Index File to '/var/lib/ipa-client/sysrestore/sysrestore.index' 2021-06-01T17:27:09Z DEBUG Writing Kerberos configuration to /etc/krb5.conf: 2021-06-01T17:27:09Z DEBUG #File modified by ipa-client-install includedir /var/lib/sss/pubconf/krb5.include.d/ [libdefaults] default_realm = XYZ.COM dns_lookup_realm = false dns_lookup_kdc = false rdns = false ticket_lifetime = 24h forwardable = yes udp_preference_limit = 0 [realms] XYZ.COM = { kdc = prdipaco8ldm01.XYZ.com:88 master_kdc = prdipaco8ldm01.XYZ.com:88 admin_server = prdipaco8ldm01.XYZ.com:749 kdc = drxipaco8lds01.XYZ.com:88 master_kdc = drxipaco8lds01.XYZ.com:88 admin_server = drxipaco8lds01.XYZ.com:749 default_domain = XYZ.com pkinit_anchors = FILE:/etc/ipa/ca.crt } [domain_realm] .XYZ.com = XYZ.COM XYZ.com = XYZ.COM 2021-06-01T17:27:09Z INFO Configured /etc/krb5.conf for IPA realm XYZ.COM 2021-06-01T17:27:09Z DEBUG args=keyctl search @s user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM 2021-06-01T17:27:09Z DEBUG stdout= 2021-06-01T17:27:09Z DEBUG stderr=keyctl_search: Required key not available 2021-06-01T17:27:09Z DEBUG args=keyctl search @s user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM 2021-06-01T17:27:09Z DEBUG stdout= 2021-06-01T17:27:09Z DEBUG stderr=keyctl_search: Required key not available 2021-06-01T17:27:09Z DEBUG failed to find session_cookie in persistent storage for principal 'host/drxlceco6app01.XYZ.com(a)XYZ.COM' 2021-06-01T17:27:09Z INFO trying https://prdipaco8ldm01.XYZ.com/ipa/xml 2021-06-01T17:27:09Z DEBUG Created connection context.xmlclient 2021-06-01T17:27:09Z DEBUG raw: env(None, server=True) 2021-06-01T17:27:09Z DEBUG env(None, server=True, all=True) 2021-06-01T17:27:09Z INFO Forwarding 'env' to server u'https://prdipaco8ldm01.XYZ.com/ipa/xml' 2021-06-01T17:27:09Z DEBUG NSSConnection init prdipaco8ldm01.XYZ.com 2021-06-01T17:27:09Z DEBUG Connecting: 10.113.10.50:0 2021-06-01T17:27:09Z DEBUG auth_certificate_callback: check_sig=True is_server=False Data: Version: 3 (0x2) Serial Number: 9 (0x9) Signature Algorithm: Algorithm: PKCS #1 SHA-256 With RSA Encryption Issuer: CN=Certificate Authority,O=XYZ.COM Validity: Not Before: Mon Apr 19 14:37:53 2021 UTC Not After: Thu Apr 20 14:37:53 2023 UTC Subject: CN=prdipaco8ldm01.XYZ.com,O=XYZ.COM Subject Public Key Info: Public Key Algorithm: Algorithm: PKCS #1 RSA Encryption RSA Public Key: Modulus: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX Exponent: 65537 (0x10001) Signed Extensions: (7 total) Name: Certificate Authority Key Identifier Critical: False Key ID: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX Serial Number: None General Names: [0 total] Name: Authority Information Access Critical: False Authority Information Access: [1 total] Info [1]: Method: PKIX Online Certificate Status Protocol Location: URI: http://ipa-ca.XYZ.com/ca/ocsp Name: Certificate Key Usage Critical: True Usages: Digital Signature Non-Repudiation Key Encipherment Data Encipherment Name: Extended Key Usage Critical: False Usages: TLS Web Server Authentication Certificate TLS Web Client Authentication Certificate Name: CRL Distribution Points Critical: False CRL Distribution Points: [1 total] Point [1]: General Names: [1 total] http://ipa-ca.XYZ.com/ipa/crl/MasterCRL.bin Issuer: Directory Name: CN=Certificate Authority,O=ipaca Reasons: () Name: Certificate Subject Key ID Critical: False Data: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX Name: Certificate Subject Alt Name Critical: False Names: prdipaco8ldm01.XYZ.com ipa-ca.XYZ.com HTTP/prdipaco8ldm01.XYZ.com(a)XYZ.COM ['[0]', '[1]'] Signature: Signature Algorithm: Algorithm: PKCS #1 SHA-256 With RSA Encryption Signature: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX Fingerprint (MD5): XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX Fingerprint (SHA1): XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX: XX:XX:XX:XX 2021-06-01T17:27:09Z DEBUG approved_usage = SSL Server intended_usage = SSL Server 2021-06-01T17:27:09Z DEBUG cert valid True for "CN=prdipaco8ldm01.XYZ.com,O=XYZ.COM" 2021-06-01T17:27:09Z DEBUG handshake complete, peer = 10.113.10.50:443 2021-06-01T17:27:09Z DEBUG Protocol: TLS1.2 2021-06-01T17:27:09Z DEBUG Cipher: TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 2021-06-01T17:27:09Z DEBUG received Set-Cookie 'ipa_session=MagBearerToken=Aus0%2bwdoksGBb%2belr0QOIi6Yk7TDzrcvkEuJLRtZf1KNWdahbAPsUyeWqGHs2CM72OMQKtkhONEi6FBan0Km69ssXfx%2bgu6r96B9VC4paNAXVi%2fVr3dd450OSsT1%2fHevzaAFoqFI0Mz95R%2bWgeIkuR4eZ%2fjvCLSGBlM3TwoQUMLA9CKKqPAh6kyN%2fMy6YaG0oXET1ht51P4zJ3rfXdPP9Ael%2bvTNQrS%2fiyCE%2b4TzjZtoNLHei2s5BoGlyZ3GPUS7;path=/ipa;httponly;secure;' 2021-06-01T17:27:09Z DEBUG storing cookie 'ipa_session=MagBearerToken=Aus0%2bwdoksGBb%2belr0QOIi6Yk7TDzrcvkEuJLRtZf1KNWdahbAPsUyeWqGHs2CM72OMQKtkhONEi6FBan0Km69ssXfx%2bgu6r96B9VC4paNAXVi%2fVr3dd450OSsT1%2fHevzaAFoqFI0Mz95R%2bWgeIkuR4eZ%2fjvCLSGBlM3TwoQUMLA9CKKqPAh6kyN%2fMy6YaG0oXET1ht51P4zJ3rfXdPP9Ael%2bvTNQrS%2fiyCE%2b4TzjZtoNLHei2s5BoGlyZ3GPUS7; Domain=prdipaco8ldm01.XYZ.com; Path=/ipa; Secure; HttpOnly' for principal host/drxlceco6app01.XYZ.com(a)XYZ.COM 2021-06-01T17:27:09Z DEBUG args=keyctl search @s user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM 2021-06-01T17:27:09Z DEBUG stdout= 2021-06-01T17:27:09Z DEBUG stderr=keyctl_search: Required key not available 2021-06-01T17:27:09Z DEBUG args=keyctl search @s user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM 2021-06-01T17:27:09Z DEBUG stdout= 2021-06-01T17:27:09Z DEBUG stderr=keyctl_search: Required key not available 2021-06-01T17:27:09Z DEBUG args=keyctl padd user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM @s 2021-06-01T17:27:09Z DEBUG stdout=915601519 2021-06-01T17:27:09Z DEBUG stderr= 2021-06-01T17:27:09Z WARNING Hostname (drxlceco6app01.XYZ.com) not found in DNS 2021-06-01T17:27:09Z DEBUG Writing nsupdate commands to /etc/ipa/.dns_update.txt: 2021-06-01T17:27:09Z DEBUG zone XYZ.com. update delete drxlceco6app01.XYZ.com. IN A send update add drxlceco6app01.XYZ.com. 1200 IN A 10.111.5.11 send 2021-06-01T17:27:10Z DEBUG args=/usr/bin/nsupdate -g /etc/ipa/.dns_update.txt 2021-06-01T17:27:10Z DEBUG stdout= 2021-06-01T17:27:10Z DEBUG stderr=tkey query failed: GSSAPI error: Major = Unspecified GSS failure. Minor code may provide more information, Minor = Server DNS/udns1.ultradns.net(a)XYZ.COM not found in Kerberos database. 2021-06-01T17:27:10Z DEBUG nsupdate failed: Command '/usr/bin/nsupdate -g /etc/ipa/.dns_update.txt' returned non-zero exit status 1 2021-06-01T17:27:10Z ERROR Failed to update DNS records. 2021-06-01T17:27:10Z DEBUG args=/sbin/service messagebus start 2021-06-01T17:27:10Z DEBUG stdout=Starting system message bus: 2021-06-01T17:27:10Z DEBUG stderr= 2021-06-01T17:27:10Z DEBUG args=/sbin/service messagebus status 2021-06-01T17:27:10Z DEBUG stdout=messagebus (pid 1186) is running... 2021-06-01T17:27:10Z DEBUG stderr= 2021-06-01T17:27:10Z DEBUG args=/sbin/service certmonger restart 2021-06-01T17:27:10Z DEBUG stdout=Stopping certmonger: ?[60G[?[0;31mFAILED?[0;39m] Starting certmonger: ?[60G[?[0;32m OK ?[0;39m] 2021-06-01T17:27:10Z DEBUG stderr= 2021-06-01T17:27:10Z DEBUG args=/sbin/service certmonger status 2021-06-01T17:27:10Z DEBUG stdout=certmonger (pid 1974) is running... 2021-06-01T17:27:10Z DEBUG stderr= 2021-06-01T17:27:10Z DEBUG args=/sbin/service certmonger stop 2021-06-01T17:27:10Z DEBUG stdout=Stopping certmonger: ?[60G[?[0;32m OK ?[0;39m] 2021-06-01T17:27:10Z DEBUG stderr= 2021-06-01T17:27:11Z DEBUG args=/sbin/service certmonger restart 2021-06-01T17:27:11Z DEBUG stdout=Stopping certmonger: ?[60G[?[0;31mFAILED?[0;39m] Starting certmonger: ?[60G[?[0;32m OK ?[0;39m] 2021-06-01T17:27:11Z DEBUG stderr= 2021-06-01T17:27:11Z DEBUG args=/sbin/service certmonger status 2021-06-01T17:27:11Z DEBUG stdout=certmonger (pid 2063) is running... 2021-06-01T17:27:11Z DEBUG stderr= 2021-06-01T17:27:11Z DEBUG args=/sbin/chkconfig certmonger on 2021-06-01T17:27:11Z DEBUG stdout= 2021-06-01T17:27:11Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG args=ipa-getcert request -d /etc/pki/nssdb -n IPA Machine Certificate - drxlceco6app01.XYZ.com -N CN=drxlceco6app01.XYZ.com,O=XYZ.COM -K host/drxlceco6app01.XYZ.com(a)XYZ.COM 2021-06-01T17:27:12Z DEBUG stdout=New signing request "20210601172712" added. 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z INFO Adding SSH public key from /etc/ssh/ssh_host_rsa_key.pub 2021-06-01T17:27:12Z DEBUG raw: host_mod(u'drxlceco6app01.XYZ.com', ipasshpubkey=[u'ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAobH2Rt+aBxrhxWJazVGUpMej9nnncp8DhPewnZkyZxoSAyDc6C5c3nBqW22/Cr7gk26d/D2Ietbi0E7mFrt5Wo4bGgN2KcnlG3ABSifvwh3oqzL+anT6+/lkwzgm3hwIQQRDfF3/GljmvX495HateMqc7syLyOe5ZnKI4Xu6khQ/JF1hhv+8GiUbl7+le+QxYuosmNNIekfMqVbtJ8IM7Zf5/CXINIkwy1UtV+gl0JsAn6AlcBfLcsssg6LQVdgCCjVsJFNB2t+tR0LozJ8L5mDerKqVxJZWI3EnfLIXMq0VWoVfn20fPe0pkcoiyv9bQt/YsDxZS54BFjlTK7DpjQ=='], updatedns=False) 2021-06-01T17:27:12Z DEBUG host_mod(u'drxlceco6app01.XYZ.com', random=False, ipasshpubkey=(u'ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAobH2Rt+aBxrhxWJazVGUpMej9nnncp8DhPewnZkyZxoSAyDc6C5c3nBqW22/Cr7gk26d/D2Ietbi0E7mFrt5Wo4bGgN2KcnlG3ABSifvwh3oqzL+anT6+/lkwzgm3hwIQQRDfF3/GljmvX495HateMqc7syLyOe5ZnKI4Xu6khQ/JF1hhv+8GiUbl7+le+QxYuosmNNIekfMqVbtJ8IM7Zf5/CXINIkwy1UtV+gl0JsAn6AlcBfLcsssg6LQVdgCCjVsJFNB2t+tR0LozJ8L5mDerKqVxJZWI3EnfLIXMq0VWoVfn20fPe0pkcoiyv9bQt/YsDxZS54BFjlTK7DpjQ==',), rights=False, updatedns=False, all=False, raw=False, no_members=False) 2021-06-01T17:27:12Z INFO Forwarding 'host_mod' to server u'https://prdipaco8ldm01.XYZ.com/ipa/xml' 2021-06-01T17:27:12Z DEBUG NSSConnection init prdipaco8ldm01.XYZ.com 2021-06-01T17:27:12Z DEBUG Connecting: 10.113.10.50:0 2021-06-01T17:27:12Z DEBUG handshake complete, peer = 10.113.10.50:443 2021-06-01T17:27:12Z DEBUG Protocol: TLS1.2 2021-06-01T17:27:12Z DEBUG Cipher: TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 2021-06-01T17:27:12Z DEBUG received Set-Cookie 'ipa_session=MagBearerToken=yKnSiJdb44vhq6AuqB%2boAE5Fatp7CXJ8A9xYVUqlqXI73Gk9ukPfIr9%2bD6KnSCiBXmtVx3flwJ1Rf17528nymjCE5vMtNTSeVU5l8rn36fEtAFq6QZt%2bAHs2LjPLWwyR9geT7Y5aKgLbEMDzZv0DTwM3N2ocM0b7Rc6inZUvAgU%2fYmqmkZafsbYy%2fCUm2Kgyx%2b%2fZ6kQg%2fK94CVAqMLxZDE1k1gAP3qq98k%2fllMQu9k0GAYcdKEbmN%2bwff4LzeQRs;path=/ipa;httponly;secure;' 2021-06-01T17:27:12Z DEBUG storing cookie 'ipa_session=MagBearerToken=yKnSiJdb44vhq6AuqB%2boAE5Fatp7CXJ8A9xYVUqlqXI73Gk9ukPfIr9%2bD6KnSCiBXmtVx3flwJ1Rf17528nymjCE5vMtNTSeVU5l8rn36fEtAFq6QZt%2bAHs2LjPLWwyR9geT7Y5aKgLbEMDzZv0DTwM3N2ocM0b7Rc6inZUvAgU%2fYmqmkZafsbYy%2fCUm2Kgyx%2b%2fZ6kQg%2fK94CVAqMLxZDE1k1gAP3qq98k%2fllMQu9k0GAYcdKEbmN%2bwff4LzeQRs; Domain=prdipaco8ldm01.XYZ.com; Path=/ipa; Secure; HttpOnly' for principal host/drxlceco6app01.XYZ.com(a)XYZ.COM 2021-06-01T17:27:12Z DEBUG args=keyctl search @s user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM 2021-06-01T17:27:12Z DEBUG stdout=915601519 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG args=keyctl search @s user ipa_session_cookie:host/drxlceco6app01.XYZ.com@XYZ.COM 2021-06-01T17:27:12Z DEBUG stdout=915601519 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG args=keyctl pupdate 915601519 2021-06-01T17:27:12Z DEBUG stdout= 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG Caught fault 4202 from server https://prdipaco8ldm01.XYZ.com/ipa/xml: no modifications to be performed 2021-06-01T17:27:12Z DEBUG Writing nsupdate commands to /etc/ipa/.dns_update.txt: 2021-06-01T17:27:12Z DEBUG zone XYZ.com. update delete drxlceco6app01.XYZ.com. IN SSHFP send update add drxlceco6app01.XYZ.com. 1200 IN SSHFP 1 1 F6ABCFF542C5E35268387C2A53EBF83C5C6B0517 send 2021-06-01T17:27:12Z DEBUG args=/usr/bin/nsupdate -g /etc/ipa/.dns_update.txt 2021-06-01T17:27:12Z DEBUG stdout= 2021-06-01T17:27:12Z DEBUG stderr=tkey query failed: GSSAPI error: Major = Unspecified GSS failure. Minor code may provide more information, Minor = Server DNS/udns1.ultradns.net(a)XYZ.COM not found in Kerberos database. 2021-06-01T17:27:12Z DEBUG nsupdate failed: Command '/usr/bin/nsupdate -g /etc/ipa/.dns_update.txt' returned non-zero exit status 1 2021-06-01T17:27:12Z WARNING Could not update DNS SSHFP records. 2021-06-01T17:27:12Z DEBUG args=/sbin/service nscd status 2021-06-01T17:27:12Z DEBUG stdout=nscd is stopped 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG args=/sbin/service nscd stop 2021-06-01T17:27:12Z DEBUG stdout= 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG args=/sbin/chkconfig nscd off 2021-06-01T17:27:12Z DEBUG stdout= 2021-06-01T17:27:12Z DEBUG stderr= 2021-06-01T17:27:12Z DEBUG Saving StateFile to '/var/lib/ipa-client/sysrestore/sysrestore.state' 2021-06-01T17:27:12Z DEBUG Saving StateFile to '/var/lib/ipa-client/sysrestore/sysrestore.state' 2021-06-01T17:27:12Z DEBUG Saving StateFile to '/var/lib/ipa-client/sysrestore/sysrestore.state' 2021-06-01T17:27:15Z DEBUG args=/usr/sbin/authconfig --enablesssdauth --enablemkhomedir --update --enablesssd 2021-06-01T17:27:15Z DEBUG stdout=Starting sssd: ?[60G[?[0;32m OK ?[0;39m] Starting oddjobd: ?[60G[?[0;32m OK ?[0;39m] 2021-06-01T17:27:15Z DEBUG stderr= 2021-06-01T17:27:15Z INFO SSSD enabled 2021-06-01T17:27:15Z INFO Configuring XYZ.com as NIS domain 2021-06-01T17:27:15Z DEBUG args=/bin/nisdomainname 2021-06-01T17:27:15Z DEBUG stdout=(none) 2021-06-01T17:27:15Z DEBUG stderr= 2021-06-01T17:27:15Z DEBUG Saving StateFile to '/var/lib/ipa-client/sysrestore/sysrestore.state' 2021-06-01T17:27:15Z DEBUG args=/usr/sbin/authconfig --update --nisdomain XYZ.com 2021-06-01T17:27:15Z DEBUG stdout=Starting sssd: ?[60G[?[0;32m OK ?[0;39m] 2021-06-01T17:27:15Z DEBUG stderr= 2021-06-01T17:27:15Z DEBUG args=/bin/nisdomainname XYZ.com 2021-06-01T17:27:15Z DEBUG stdout= 2021-06-01T17:27:15Z DEBUG stderr= ======================================== I am unable to understand what i am missing or changes required in current config. Any help / suggestions appreciated. Regards, Rohan

3 2

Modifying DNF's output
by Francisco Tissera 02 Jun '21

02 Jun '21

Hello everyone, I am currently using Fedora_linux 34, and I'd like to know, since I have been using this OS for over a month and a half, and I find DNF's output a bit... too much, if I could modify it somehow. I'd like to modify how it outputs the installation of software. For example, when the dnf install package name command is issued, the first thing that will appear on the terminal is how long ago the last dependency check was done. Can that line of output be suppressed in any way? If not, that's fine, I'll get used to it, but still, it would be cool if it could. Any help would be apriciated. Best regards. Francisco.

8 9

How do I recover from BTRFS issues?
by John Mellor 01 Jun '21

01 Jun '21

I'm getting a pretty bad history with BTRFS as the default filesystem for Fedora Workstation. Its messing up repeatedly and leaving me stuck. I should note that I have used ext2/3/4 for about 20 years, ZFS on Solaris for even longer, and ZFS on Ubuntu for 2 major releases now. I have 2 different machines that have had issues so far. On my Gateway Fedora 33 daily-driver machine running the 5.11 kernels, I had a single Patriot SSD using the default BTRFS partitioning scheme. I kept seeing BTRFS scrub reporting uncorrectable issues and assumed that it was a defective SSD. However, this SSD is now in a Mandriva machine and is solid. Its not the SSD. I did about 10 reinstalls after having the machine lock up at random times, and finally trashed the machine in frustration. I later discovered that it had developed a bad memory stick, which may have contributed to the initial problem cause. However, the lack of BTRFS robustness, no obvious mechanism to keep /home during a reinstall, and very poor BTRFS documentation have left me wary. On my current daily-driver machine, I have fully-updated Fedora 34 running the 5.12 kernels on 2 disks set up as as a BTRFS RAID-1 pair. I expected that would allow for much more robustness than the single disk setup on my F33 machine, giving me error protection similar to what I would have on ZFS. Unfortunately, that does not appear to be the case. I have run low-level diagnostics on everything in this machine, and it is working properly. Unusually, there aren't even any failed lowlevel disk blocks on either drive. So the hardware on this older enterprse-class Lenovo desktop is not faulty. I believe that due to faulty BIOS and security chip handling in the 5.12 kernel, I have had issues requiring me to occasionally hard powercycle the machine to get it to actually power down. One would expect that with BTRFS doing RAID-1, recovery from lockups should never leave the filesystem damaged. That does not appear to be the case. Currently the disks have no low-level errors, but BTRFS scrub shows 10 unrecoverable errors. That's messed up. Both disks are enterprise-class Seagate Constellation 500GB SATA drives with slightly different model numbers and manufacturing dates, so I don't believe that there is any firmware issue with them. No matter what, I expect that the initial fsck or brtfs check should keep data integrity, but possibly backing out a few seconds in journal transactions. I am aware of at least one kernel bug being highly relevant as the initial trigger - bugzilla 195809. I believe that there are serious bugs in the hardware optimization in Firefox (one bug filed) and in Gnome and more relevant bugs in the kernel, but whatever the triggering issue, the filesystem should never fail. How do I recover? The machine is currently bootable and seems to run ok, but locks up once in a while on powerdown and on exiting firefox. I cannot describe it as stable with this BTRFS issue. A scrub currently says that / (and therefore also /home) has 10 unrecoverable errors. I can find no Fedora or Suse documentation on how to recover from what should be impossible situations like this. A reinstall will not preserve /home, leading to unacceptable data loss. I did an offline btrfs check on my F33 machine that left the machine unbootable, so its probably not an option either. I'm stuck at this point. Should I just stop using the default BTRFS filesystem and go back to ext4? Help appreciated! -- John Mellor

2 1