users July 2021

users@lists.fedoraproject.org

88 participants
90 discussions

New fc33/FF 90.0/amazon.com issue
by Dave Ulrick 30 Jul '21

30 Jul '21

Starting the morning of 7/23/2021 around 8 AM Central US time, I started to experience issues with many Web pages at amazon.com. Instead of the desired page, a picture of a dog would appear with a message "Something went wrong at our end" or "Sorry we couldn't find that page." The issue appears most frequently when I click on the Cart icon or the Account and Lists link. I can recreate this problem with two PCs running fc33 with all available updates and Firefox 90.0. Prior to the onset of the issue, amazon.com worked perfectly with these two PCs. The issue does not occur when I visit amazon.com with fc33 and Chrome 92.0 (on one of the two PCs that exhibit the issue with FF 90.0) or with Win10 and Firefox 90.0.2. Anyone else seeing this issue? Dave

5 14

Expired Fedora Webpage Cert?
by John Mellor 30 Jul '21

30 Jul '21

Is it just me, or is the web page cert expired this morning at https://askbot.fedoraproject.org/ ?

8 7

Fedora 34 boot screen
by Paul Smith 29 Jul '21

29 Jul '21

Dear All, Since a few weeks ago, when I boot my Fedora 34 machine, I get a three animated square dots as a boot screen like the following: https://i.stack.imgur.com/7hFp0.png Moreover, the booting duration seems to be longer than before. Any reason for that? Thanks in advance, Paul

5 11

how to configure smartd to send a mail with ssmtp?
by François Patte 29 Jul '21

29 Jul '21

Bonjour, I dessperatly try to have smartd sending me an email with ssmtp but it seems to be impossible! There are a lot of environment variables (SMARTD_MAILER, SMARTD_ADDRESS...) but nowhere I found where they could be defined! I tried in file smartd.conf, in smartd_warning.sh, in /usr/libexec/smartmontools/smartdnotify... But it does not work. Does somebody know how to proceed? Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire MAP5 --- UMR CNRS 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)1 4286 2145 http://www.math-info.univ-paris5.fr/~patte ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

Left-hand mouse click sometimes not recognized
by Paul Smith 28 Jul '21

28 Jul '21

Dear All, From time to time, I have to click several times to get a left-hand mouse click recognized. Any ideas? Thanks in advance, Paul

6 8

Confused
by jarmo 28 Jul '21

28 Jul '21

Just checked KERNEL related, what installed into my desktop, I found: [root@oh1mrr oh1mrr]# rpm -qa | grep kernel kernel-srpm-macros-1.0-4.fc34.noarch libreport-plugin-kerneloops-2.15.2-2.fc34.x86_64 abrt-addon-kerneloops-2.14.6-3.fc34.x86_64 kernel-core-5.12.15-300.fc34.x86_64 kernel-modules-5.12.15-300.fc34.x86_64 kernel-5.12.15-300.fc34.x86_64 kernel-modules-extra-5.12.15-300.fc34.x86_64 kernel-core-5.12.17-300.fc34.x86_64 kernel-modules-5.12.17-300.fc34.x86_64 kernel-5.12.17-300.fc34.x86_64 kernel-modules-extra-5.12.17-300.fc34.x86_64 kernel-core-5.13.4-200.fc34.x86_64 kernel-modules-5.13.4-200.fc34.x86_64 kernel-5.13.4-200.fc34.x86_64 kernel-modules-extra-5.13.4-200.fc34.x86_64 kernel-headers-5.13.3-200.fc34.x86_64 Now what makes me wonder, why this: kernel-headers-5.13.3-200.fc34.x86_64 is different than all other KERNEL versions? Or is this "no worries mate" ? Jarmo

3 3

Message after update of wine 6.13??
by Michael D. Setzer II 26 Jul '21

26 Jul '21

Just did dnf update and it installed wine 6.13. Afterwards I generally run wine notepad from command line to have it do the test of update. This time, it did the update fine, and comes up with the blank screen and I closed the notepad. After a short time, the following comes up on terminal window. wine: Unhandled page fault on write access to 0000000000000000 at address 00007F56D62BE3A1 (thread 0074), starting debugger... 0074:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 100 72" (1115) Read the Wine Developers Guide on how to set up winedbg or another debugger Not sure why it can't start debugger. I can run wine winedbg --auto 100 72 afterwards, but it shows info, but doesn't apply to the previous notepad run. If I run notepad from the menu, you would never see this message at all, so not sure if it is just something to ignore. Thanks.

1 0

resizing qemu image
by Robert Moskowitz 26 Jul '21

26 Jul '21

Things have been 'quiet' here, working away, but I need a bit of help.... I have a 10G Fedora image that is now too small. I need to grow it. I have shutdown the image in VMM, and quite VMM. I backed up the image, /var/lib/libvirt/images/fedora21.qcow2 to a USB drive. Then I ran: qemu-img resize fedora21.qcow2 +10G and qemu-img info fedora21.qcow2 image: fedora21.qcow2 file format: qcow2 virtual size: 20 GiB (21474836480 bytes) disk size: 10 GiB cluster_size: 65536 Format specific information: compat: 1.1 lazy refcounts: true refcount bits: 16 corrupt: false That seems to be the easy part. But now the instructions I am finding seem to offer different approachs, and might not be for running on Fedora. What is the 'best' approach forward? thanks

6 11

usb port enumeration changed?
by Eyal Lebedinsky 26 Jul '21

26 Jul '21

I know that device numbers change, but bus/port numbers are stable and reflect the physical layout of the hubs and devices. I relied for years on these port numbers to identify specific (otherwise identical) devices. For example, I have two TEMPer temperature sensor devices attached. They are both plugged into a 4-port USB3 hub. They are on ports 3 and 4. Port 2 is unused and port 1 has a bluetooth radio attached. I also have 5 dvb usb tuners which stayed in their old positions. Until now, I would see this: $ lsusb Bus 001 Device 013: ID 0c45:7401 Microdia TEMPer Temperature Sensor Bus 001 Device 025: ID 0c45:7401 Microdia TEMPer Temperature Sensor $ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 10000M |__ Port 4: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M |__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 5000M |__ Port 5: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M |__ Port 2: Dev 26, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 2: Dev 27, If 1, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 2: Dev 27, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 4: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 10, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 3: Dev 10, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 1: Dev 6, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 1: Dev 6, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 4: Dev 12, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 15, If 0, Class=Printer, Driver=usblp, 12M |__ Port 1: Dev 14, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 1: Dev 14, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 4: Dev 16, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 4: Dev 16, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 2: Dev 8, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 2: Dev 8, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 5: Dev 5, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 1: Dev 20, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 1: Dev 20, If 1, Class=Wireless, Driver=btusb, 12M |__ Port 3: Dev 25, If 0, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 3: Dev 25, If 1, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 4: Dev 13, If 0, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 4: Dev 13, If 1, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 6: Dev 19, If 0, Class=Human Interface Device, Driver=usbfs, 1.5M The TEMPer devices show on Bus 01 as expected: Port 5.Port 3 (Dev 11) Port 5.Port 4 (Dev 13) After rebooting the newly installed kernel 5.13.4-200.fc34.x86_64 I get: $ lsusb Bus 001 Device 012: ID 0c45:7401 Microdia TEMPer Temperature Sensor Bus 001 Device 003: ID 0c45:7401 Microdia TEMPer Temperature Sensor $ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 10000M |__ Port 4: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M |__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 5000M |__ Port 5: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 3: Dev 3, If 1, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 4: Dev 5, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 11, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 3: Dev 11, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 1: Dev 7, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 1: Dev 7, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 4: Dev 13, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 15, If 0, Class=Printer, Driver=usblp, 12M |__ Port 1: Dev 14, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 1: Dev 14, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 4: Dev 16, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 4: Dev 16, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 2: Dev 9, If 0, Class=Vendor Specific Class, Driver=dvb_usb_rtl28xxu, 480M |__ Port 2: Dev 9, If 1, Class=Vendor Specific Class, Driver=, 480M |__ Port 5: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 1: Dev 10, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 1: Dev 10, If 1, Class=Wireless, Driver=btusb, 12M |__ Port 3: Dev 12, If 0, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 3: Dev 12, If 1, Class=Human Interface Device, Driver=, 1.5M <<<<< |__ Port 6: Dev 18, If 0, Class=Human Interface Device, Driver=usbfs, 1.5M One can see that the TEMPer devices are now showing on Bus 01 in separate positions: Port 3 (Dev 3) new position Port 5.Port 3 (Dev 12) old position This, naturally, confuses my script that collects the data (I use temper-poll). Is this an intentional change? -- Eyal Lebedinsky (fedora(a)eyal.emu.id.au)

2 1

Restart systemd service based on memory usage
by Richard Shaw 25 Jul '21

25 Jul '21

I have a Kiosk I'm trying out using Chromium, unfortunately it seems to have a memory leak and crashes in less than 24 hours of usage. I see systemD has an option for "MemoryMax" but was wondering if anyone has actually used it? Is it as simple as MemoryMax=512M OnFailure=Restart or something like that? Thanks, Richard

3 4

← Newer
1
2
3
4
5
6
7
8
9
Older →