users September 2021

users@lists.fedoraproject.org

73 participants
77 discussions

Configuring drawing tablet
by Paul Smith 13 Sep '21

13 Sep '21

Dear All, I have recently bought a drawing tablet, which does not come with any Linux device driver. It works perfectly even without any device driver. However, I would like to associate a script to each of the tablet buttons. I guess that whenever a button is pressed, a signal of such an occurrence can be captured by Fedora, but I do not know how. Could someone please help me? Thanks in advance, Paul

2 4

qemu-qvm: need an 8th gen CPU
by ToddAndMargo 13 Sep '21

13 Sep '21

Hi All, I need an 8th gen CPU to get Windows 11 to upgrade properly. Which one of qemu-kvm's cpu's is 8th gen? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A computer without Microsoft is like a chocolate cake without the mustard ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3 5

restoring the screen/apps/menus on powering back up
by bruce 13 Sep '21

13 Sep '21

Hi. Wondering if there's a solution/process to being able to restore a laptop to the state it had prior to powering down. I run Gnome. Say I have multiple workspaces. Each workspace has a number of "term" windows, and some gedit processes. The Gedit processes might be running/editing different files. Is there a way to power down, and power back up, and to be able to have the same workspace/layout with all the terms/apps running as before? Thanks

2 1

A question about /bin/startplasma-x11
by George R Goffe 13 Sep '21

13 Sep '21

Hi, I have been away from plasma for a while and see some changes of course. One is plaguing me though... namely, how does one manually save a session. It used to be in the settings but I can't seem to find it now. Could someone please point me to where I should look? Best regards and STAY SAFE, George...

3 2

Enabling TPM emulation for Qemu Win10 guests
by Sam Varshavchik 13 Sep '21

13 Sep '21

If you're running a qemu VM with a Windows 10 guest (in F34) and you successfully enabled TPM emulation, I'd like to compare notes with you. I used virt-manager to enable TPM 2.0, both TIS and CRB types: <tpm model="tpm-tis"> <backend type="emulator" version="2.0"/> <alias name="tpm0"/> </tpm> and <tpm model="tpm-crb"> <backend type="emulator" version="2.0"/> <alias name="tpm0"/> </tpm> My fully activated/licensed Windows 10 VM (21H1) refuses to recognize TPM. "Security Processor Troubleshooting" reports: "Your device does not support this feature." I've read multiple reports that this should work, so I must be missing something. Looking at a working qemu configuration in /etc/libvirt/qemu is the only thing I can think of.

3 4

Failure in gsetting up a UEFI USB Flash with Fedora 33??
by Michael D. Setzer II 13 Sep '21

13 Sep '21

I've found 6 web sites so far that had instructions on setting up a UEFI USB flash to boot, but all have failed. Some actually create a UEFI Flash that my test usb is seen as being a UEFI flash, but the boot fails? The last one I fully documented the steps from page, but the resulting flash doesn't even show up as an UEFI Flash. Probable due to the failure of the grub2-install option?? grub2-install: error: this utility cannot be used for EFI platforms because it does not support UEFI Secure Boot. So, it seems it worked on some system before, but fails with Fedora 33 at least?? Don't want to create a UEFI Secure Boot, but just a UEFI Boot?? #https://linuxconfig.org/how-to-create-multiboot-usb-with-linux parted -s /dev/sdb mklabel msdos parted -s /dev/sdb mkpart primary 1MiB 551Mib parted -s /dev/sdb set 1 esp on parted -s /dev/sdb set 1 boot on mkfs.fat -F32 /dev/sdb1 parted -s /dev/sdb mkpart primary 551Mib 100% mkfs.ext4 /dev/sdb2 mkdir /media/{efi,data} mount /dev/sdb1 /media/efi mount /dev/sdb2 /media/data # Installing legacy grub2 grub2-install \ --target=i386-pc \ --recheck \ --boot-directory="/media/data/boot" /dev/sdb # Installing grub for efi grub2-install \ --target=x86_64-efi \ --recheck \ --force \ --removable \ --efi-directory="/media/efi" \ --boot-directory="/media/data/boot" ## grub2-install: error: this utility cannot be used for EFI platforms because it does not support UEFI Secure Boot. mkdir /media/data/boot/iso chown 1000:1000 /media/data/boot/iso cd /media/data/boot/iso/ cp /home/msetzerii/g4l0.60alpha/g4l-v0.60.iso . cd /media/data/boot/grub2 #create grub.cfg with these lines. #menuentry "G4L" { # isofile="/boot/iso/g4l-v0.60.iso" # loopback loop "${isofile}" # linux (loop)/isolinux/bz5x13.14 iso-scan/filename="${isofile}" root=/dev/ram0 # initrd (loop)/isolinux/ramdisk.lzma #} Have just got had email chat with Clonezilla developer to see what they have done. Seems they gave up on trying to make a UEFI boot, and have created a live-cd boot of a distro to get around issue. Seems going from boot loaders link syslinux, grub4dos, and regular grub2 with a 10M kernel and 30M ramdisk. With Fedora, it would require the 2G live CD image, and then the downloading of a number of packages that are not included on the live-cd. So, 40M to 2000+M and a bunch of steps. Does anyone know of a process to make a UEFI USB Boot that actual works using Fedora?? Very Frustrated...

9 47

Re: Problem with the dovecot-fts-xapian package.
by Bob Marcan 12 Sep '21

12 Sep '21

On Sun, 12 Sep 2021 11:36:46 +0100 Joan Moreau <jom(a)grosjo.net> wrote: > This is where I am for now : > > https://koji.fedoraproject.org/koji/packageinfo?packageID=34417 > > Probably, I should wait for Fedora batch programs to push that into main rep > > On 2021-09-12 11:18, Joan Moreau wrote: > > > Hi Bob, > > > > I am trying to achieve that. > > > > But do you know the process of pushing an update as a maintainer, in > fedore repositories ? > > > > Thank you > > > > On 2021-09-12 11:02, Bob Marcan wrote: > > On Sun, 12 Sep 2021 09:45:35 +0100 > > Joan Moreau <jom(a)grosjo.net> wrote: > > > > Thank you for notice. > > > > What is the process to rebuild the package with recent dovecot, as > (instead of existing 1.4.12-1) ? > > There are no (yet) 1.4.12-2 in updates-testing or > updates-testing-modular repository. > > Should i'll wait for update? > > BR, Bob Got the new version and there is no more API mismatch. It's not so important for me, since i'm retired and i'm running this on my home computer. But i think it needs more support from te dovecot group. There a lot file protection issues nad lack of documentation on dovecot side. BR, Bob

1 0

Problem with the dovecot-fts-xapian package.
by Bob Marcan 12 Sep '21

12 Sep '21

Problem with the dovecot-fts-xapian package. Fedora 34 with latest updates. dovecot-2.3.16-1.fc34.x86_64 dovecot-fts-xapian-1.4.12-1.fc34.x86_64 [root@smicro conf.d]# systemctl restart dovecot [root@smicro conf.d]# doveadm index -A \* Fatal: Couldn't load required plugin /usr/lib64/dovecot/lib21_fts_xapian_plugin.so: Module is for different ABI version 2.3.ABIv15(2.3.15) (we have 2.3.ABIv16(2.3.16)) BR, Bob

1 0

Problem reporting / Mate-Screensaver crash / Packagekit crach.
by Ger van Dijck 11 Sep '21

11 Sep '21

To all, When I activate the screesaver I get the message : Mate-Screensaver quit unexpectedly : Application crash, Packagekit idem : Application crash . When this happens ( after a delay of 5 minutes ) I get a blue screen and have to turn off the system by force , so hardware OFF. When I want to do a Problem Reporting I get the message : https://retrace.fedoraproject.org does not excist (server error 404) . Question : What now ? Regards , Ger van Dijck.

1 0

networked sound via pipewire
by Greg Woods 11 Sep '21

11 Sep '21

Is this actually possible right now? Pipewire is under rapid development which means the documentation out there on it rapidly becomes dated, so I've been poking around for the past hour but haven't found anything that would help me do what I want. What I want to do is have some of my virtual machines send their output over the network to my desktop. Not having audio from the VMs is limiting what I can do with them. Can this be done with pipewire as it stands now? Is it documented anywhere? Thanks, --Greg

2 1

Using locate github
by Robert Moskowitz 10 Sep '21

10 Sep '21

I have a F32 system I am using with github. Yes, I know updating is overdue.... Github has switched to person access tokens since the last time I used it. I created my https PAT but can't seem to get the git command to use it. It just uses my GIt ID and password which now gets rejected. Any recommendation (other than updating to F34!) to get my "git push origin" command to work? It seems that there is a github-cli in beta, but does not seem to be an option here. thanks

3 3

Re: Failure in gsetting up a UEFI USB Flash with Fedora 33??
by Samuel Sieb 10 Sep '21

10 Sep '21

So the error message is "initramfs unpacking failed: no cpio magic". I I guess you will need to repack your initramfs to be compatible with the Fedora kernel. Are you aware that there are various tools included with Fedora to help you create live boot images?

1 0

cups is the worst software....
by François Patte 08 Sep '21

08 Sep '21

Bonjour, I have several computers at home and one with an usr-printer attached. I struggled sometimes to configure cups on other computers to use this printer. Now I upgraded to f34, and the configuration no longer works: "printer is misconfigured or no longer exists" is the answer if I send a test page.... After deleting the printer, I try to use the discovery tool in the administration page of cups (localhost:631) and it find the printer attached to my main computer but at the end of the configuration, when I try to print a test page, the answer is the same: "printer is misconfigured or no longer exists" This tool also finds old printers I configured many years ago and which (really) non longer exist... What to do? Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822

6 6

pipewire configuration for f34
by Jack Craig 08 Sep '21

08 Sep '21

in trying to fathom my loss of audio out, i keep seeing reference to files in /etc/pipewire/ where my install has nothing! What am I missing? thx!

5 9

Installation & EFI
by Gunnar Gervin 06 Sep '21

06 Sep '21

Hi all. Where do I find a Fedora distro with EFI ? In here cos heard & read that Fedora supports EFI boot. I set wrongfully up my Macbook 2,1 OSX 10.6.8 (2007) x86-64 with Debian 32bit. Because 32bit gets outdated and bnasically is wrong for the computer, I wanted 64bit. But of some reason the computer only opens distros with EFI, like Bionic Pupp x86-64. Fedora version I found only shows up a "Windows" cd image, no "EFI" cd image on the (right) side of it. Heard that EFI is a boot installer, but unpopular because it comes (for free, but copyrighted(?)) from Microsoft(, & probably can't be changed). Thus most installers in the end (e.g Refracta, in Devuan) claim the need of Grub, where to place Grub. Destroying all the installation work done. This, due to my low knowledge, has made my computer unusable from the hard disk, only from RAM using a live Bionicpup x86-64 dvd. A friend said he was able to UEFI install Fedora. Checked online, found article that claimed Fedora as one distro supporting EFI in installing. But my computer can only open a distro with EFI image; no EFI gives only a blinking ? sign or a black irresponsive screen with: 1. 2. Boot option I write this from my work computer. The EX Mac /Linux machine is needed 'only' for private; entertainment, friendly online contact, and writing.

3 2

OT: How to load kernels in EFI setup.
by Michael D. Setzer II 06 Sep '21

06 Sep '21

Have a project that I've maintained since 2004. Have a simple process to add it to the regular grub boot list using the 40_custom with the following lines. menuentry G4L { linux /bz5x13.14 root=/dev/ram0 initrd /ramdisk.lzma } Just copy the kernel and ramdisk.lzma to /boot and it becomes an option in the grub menu. Just had a use that got 140 new Dell machines, and they seem to no longer support any bios boot?? So, EFI is the only option. Have the EFI kernel options set, but haven't found info on how to make an efi boot. I've looked, but I've not seen anything. Did find one page that talks about just copying kernel files to the efi direct with a minor rename and including System.map file, but doesn't say anything about the filesystem? Anyone know of a web page. Currently, the user is pulling drive out, and connecting it to an older machine to make images. Thanks.

2 4

Re: Installation & EFI
by Ryan Cunningham 06 Sep '21

06 Sep '21

> El sep. 5, 2021, a la(s) 9:12 p.m., Ryan Cunningham <happytobe2e(a)outlook.com> escribió: > > El sep. 5, 2021, a la(s) 10:35 a.m., Gunnar Gervin <dofeelok(a)gmail.com> escribió: >> >> Hi all. >> Where do I find a Fedora distro with EFI ? >> In here cos heard & read that Fedora supports EFI boot. >> I set wrongfully up my Macbook 2,1 OSX 10.6.8 (2007) x86-64 with Debian 32bit. >> Because 32bit gets outdated and bnasically is wrong for the computer, I wanted 64bit. >> But of some reason the computer only opens distros with EFI, like Bionic Pupp x86-64. >> Fedora version I found only shows up a "Windows" cd image, no "EFI" cd image on the (right) side of it. > > Are you sure that you are using the latest version of Fedora? Fedora Workstation 34 in UEFI mode works fine on my Acer Spin 3. Also, look carefully, because the boot image—although it uses UEFI—might not have “EFI” or “UEFI” in its name. Fedora boot images on Macs usually show the “Fedora” name and the Infinity Design (Fedora’s logo) in the Apple Boot Manager. >> Heard that EFI is a boot installer, but unpopular because it comes (for free, but copyrighted(?)) from Microsoft(, & probably can't be changed). >> Thus most installers in the end (e.g Refracta, in Devuan) claim the need of Grub, where to place Grub. Destroying all the installation work done. >> This, due to my low knowledge, has made my computer unusable from the hard disk, only from RAM using a live Bionicpup x86-64 dvd. A friend said he was able to UEFI install Fedora. Checked online, found article that claimed Fedora as one distro supporting EFI in installing. But my computer can only open a distro with EFI image; no EFI gives only a blinking ? sign or a black irresponsive screen with: 1. 2. Boot option >> I write this from my work computer. The EX Mac /Linux machine is needed 'only' for private; entertainment, friendly online contact, and writing. >> _______________________________________________ >> users mailing list -- users(a)lists.fedoraproject.org >> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org >> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org >> Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure > _______________________________________________ > users mailing list -- users(a)lists.fedoraproject.org > To unsubscribe send an email to users-leave(a)lists.fedoraproject.org > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org > Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure

1 0

Locate not working
by GianPiero Puccioni 06 Sep '21

06 Sep '21

Hi, I have a recent installation of F34 with the default brtfs and I discovered that updatedb and locate don't see the files in /home. Is there a workaround for that? G

2 3

Fedora distro with EFI cd image
by Gunnar Gervin 05 Sep '21

05 Sep '21

Hi all. Where do I find a live Fedora x86-64 iso image with EFI 'cd image' in it ? (My 2007 ex-Mac computer now only runs Puppy x86-64 live dvd in RAM.) My Macbook 64b computer won't open any iso without a cd image named EFI. Alt key on startup will show a 'Window cd', on the right side I need an 'EFI cd', too. Read that Fedora supports EFI. So I'm here, asking for your help &/or a link to ISO. BR, Gunnar Gervin.

2 1

NFS mount
by Dave Close 05 Sep '21

05 Sep '21

I'm trying to setup an NFS mount to an older NAS device. The client is Fedora 34, the NAS is a Buffalo Linkstation. I have access to the NAS via SSH and I can successfully mount it using CIFS and SSHFS. Of course, CIFS loses some file attributes and SSHFS seems slow and doesn't see the filesystem usage properly. So I'd prefer NFS but it keeps failing. I've even tried with my firewall disabled but no luck. The NAS only works with NFS v2. It's NFS is a client-side application as there is no NFS built into its kernel. But it is nothing new; the app has been running successfully for many folks for years. All the necessary ports seem to be open. # nmap -sU -p2049,111 nas1 PORT STATE SERVICE 111/udp open rpcbind 2049/udp open nfs # nmap -sT -p2049,111 nas1 PORT STATE SERVICE 111/tcp open rpcbind 2049/tcp open nfs I can access the NAS with rpcinfo and showmount. # showmount -e nas1 Export list for nas1: /mnt/array1/share client.compata.com # rpcinfo -p nas1 program vers proto port service 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100003 2 udp 2049 nfs 100003 2 tcp 2049 nfs 100005 1 udp 726 mountd 100005 2 udp 726 mountd 100005 1 tcp 729 mountd 100005 2 tcp 729 mountd But mount fails. # mount -v -o vers=2 -t nfs nas1:/mnt/array1/share /nas1 mount.nfs: timeout set for Sat Aug 28 17:52:01 2021 mount.nfs: trying text-based options 'vers=2,addr=192.168.44.20' mount.nfs: prog 100003, trying vers=2, prot=6 mount.nfs: trying 192.168.44.20 prog 100003 vers 2 prot TCP port 2049 mount.nfs: prog 100005, trying vers=1, prot=17 mount.nfs: trying 192.168.44.20 prog 100005 vers 1 prot UDP port 726 mount.nfs: mount(2): Protocol not supported mount.nfs: Protocol not supported # mount -v -o udp -o vers=2 -t nfs nas1:/mnt/array1/share /nas1 mount.nfs: timeout set for Sat Aug 28 17:53:43 2021 mount.nfs: trying text-based options 'udp,vers=2,addr=192.168.44.20' mount.nfs: prog 100003, trying vers=2, prot=17 mount.nfs: trying 192.168.44.20 prog 100003 vers 2 prot UDP port 2049 mount.nfs: prog 100005, trying vers=1, prot=17 mount.nfs: trying 192.168.44.20 prog 100005 vers 1 prot UDP port 726 mount.nfs: mount(2): Protocol not supported mount.nfs: Protocol not supported I have tcpdump captures from both ends and I don't see anything obviously wrong. (But then I'm not sure just what I ought to see there.) I do see the portmap calls and the results seem ok. Each is followed by a null call and a null reply, again nothing obviously wrong. I don't understand why the mount proceeds to use V1 for prog 100005 (mount) without any indication of a problem with the V2 attempt for NFS. But forcing V2 for both doesn't help. # mount -v -o nfsvers=2 -o mountvers=2 -o mountproto=tcp -t nfs nas1:/mnt/array1/share /nas1 mount.nfs: timeout set for Sat Aug 28 18:28:37 2021 mount.nfs: trying text-based options 'nfsvers=2,mountvers=2, mountproto=tcp,addr=192.168.44.20,mountaddr=192.168.44.20' mount.nfs: prog 100003, trying vers=2, prot=6 mount.nfs: trying 192.168.44.20 prog 100003 vers 2 prot TCP port 2049 mount.nfs: prog 100005, trying vers=2, prot=6 mount.nfs: trying 192.168.44.20 prog 100005 vers 2 prot TCP port 729 mount.nfs: mount(2): Protocol not supported mount.nfs: Protocol not supported I can't find anything relevant in any system log. The final message, "Protocol not supported", doesn't clearly indicate which protocol -- I presume mount(2) -- nor give any clue to a remedy. But if I force v3 for mount, I get a version mismatch. -- Dave Close, Compata, Irvine CA +1 714 434 7359 dave(a)compata.com dhclose(a)alumni.caltech.edu "Computers are useless. They can only give you answers." -- Pablo Picasso

6 8

rkhunter warning
by François Patte 05 Sep '21

05 Sep '21

Bonjour, Since I upgraded to f34, rkhunter is warning me with this file: Warning: Hidden file found: /usr/share/man/fr/man1/..1.gz: symbolic link to builtins.1.gz Asking rpm -qf /usr/share/man/fr/man1/..1.gz, it returns that this file belongs to the man-pages-fr package. rkhunter --propupd does not change anything, every day rkhunter sends me a warning mail... Which of these two must be believed: rkhunter or rpm -qf? Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822

4 4

Re: OT: RGB mechanical keyboard
by Tom Killian 04 Sep '21

04 Sep '21

Some keyboard reviews, from across the pond: https://www.theregister.com/2020/04/30/how_good_are_cheap_mechanical_keyboa…

1 0

OT: RGB mechanical keyboard
by Frederic Muller 04 Sep '21

04 Sep '21

Hi! This is a bit borderline but since I guess everybody is using a PC here (or a MAC...) you probably have a keyboard too... I recently (less than a year) got a mechanical keyboard (Logitech G512 - liked the 512 number...) and it's been complicated. I initially offered one to my wife, she loved it and "forced" me to get one too. I had to wash it dismantling the keys, putting them in soap and water, drying them, etc. I also bought a small hover to suck the potential dust creating problems (or ... something else). After less than a year both keyboards have been back under warranty, one because of the RGB lights breaking on some keys, the other one because of keys not working after a few hours of work (that's mine). When having problems (like the space bar, C key, arrows, etc stop working) I eventually took other keyboards I already have, and then I really missed the 'typing quality' of the mechanical one. I also appreciate that the Logitech keyboard do have Free Software projects allowing you to control each key and set up the lighting the way you want. You can even do (keyboard) games with those. I however suffered all those (un)typing issues and am disappointed by the overall quality. 2 keyboards, 2 went back under warranty (1 replaced, 1... waiting for it). So let's say I am hooked with the technology but... Do you guys know of any keyboard with similar typing quality but with durability and eventually free software driving the RGB lighting? I can probably live without the RGB stuff as well ;-) Oh .. I don't play games, just spend the whole day (and night?) behind (in front of?) my PC. Thank you. Fred ps: numeric pad is a must

4 5

Windows (Super) key stopped working
by Richard Shaw 03 Sep '21

03 Sep '21

At some point my Windows (Super) key stopped working. Trying the following doesn't produce any output when the super key is pressed: $ xinput list WARNING: running xinput against an Xwayland server. See the xinput man page for details. ⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ xwayland-pointer:18 id=6 [slave pointer (2)] ⎜ ↳ xwayland-relative-pointer:18 id=7 [slave pointer (2)] ⎣ Virtual core keyboard id=3 [master keyboard (2)] ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] ↳ xwayland-keyboard:18 id=8 [slave keyboard (3)] $ xinput test 8 But pluggin my keyboard into my work laptop running windows it works fine. Thanks, Richard

5 8

installing Fedora: says empty disk is almost full
by Douglas McGarrett 02 Sep '21

02 Sep '21

Hello. I'm a potential new user, but I'm having trouble with the install. I have Windows and Leap on one of the new on-board drives, and I have added /dev/sda, a new Samsung 465 GiB ssd (ordinary type) to the system. I formatted it to ext4 using GParted, and it's empty except for 8.38 GiB at the beginning that GParted must have added. When I try to add theFedora system to this, it says there is only 1.2 GiB available. I went back and ran GParted on it again, but it still comes up the same way. What am I doing wrong? Or is the drive defective? GParted doesn't complain about it. Thans for your assistance--doug

5 7

Fedora 34/KDE/Plasma desktop wallpaper showing through application windows ?
by linux guy 02 Sep '21

02 Sep '21

Hi. Fedora 34 / KDE / Plasma. Everything works great except that I can see the Fedora 34 desktop wallpaper patterns in my application windows. The desktop wallpaper is "bleeding through", like the application windows are transparent. How do I fix this ? Is it an effect in Settings ? Hardware: Asus A17 4800H with integrated GPU as well as a discrete GTX1660Ti. $ uname -a Linux fedora 5.13.12-200.fc34.x86_64 #1 SMP Wed Aug 18 13:27:18 UTC 2021 x86_64 x86_64 x86 _64 GNU/Linux Installed Packages plasma-breeze.x86_64 5.22.4-1.fc34 @updates Thanks. Fedora rocks !

3 4

Weird keyboard problem
by Frederic Muller 02 Sep '21

02 Sep '21

Hi! I'm using a Logitech G512 (wired) keyboard. Usually works perfectly in the morning and little by little I get stuck with 'some' keys. I say some because it's not regular. I press them and they don't seem to work.. then work "if I press harder" ... or later? When using the native laptop keyboard, or another BT Logitech K480 keyboard the problem is not there. I am really hesitating to bring it back as I've noticed when in the browser or some applications highlighting the blinking character cursor, that it actually stops blinking at times, and then suddenly either gets 3 keys typed in a row, or just a 'huge' time delay between the moment I typed that key and the moment it appears. Are there any reliable ways to troubleshoot and pinpoint where the issue could be coming from? Thank you. Fred

5 4