users March 2025

users@lists.fedoraproject.org

62 participants
56 discussions

e2fsck malfunction?
by Dave Close 16 Mar '25

16 Mar '25

I have been trying to create an SDcard to use with an Raspberry Pi. The card is created using the rpi-imager program on Fedora (41) and that program reports the creation as successful. Later, after mounting the ext4 partition on the card under Fedora and doing two or three minutes of exploration, I encounter a bad block. So I unmount the partition and use e2fsck to locate any bad blocks and mark them: e2fsck -y -c /dev/sdb2 But after that when I try to remount the partition, it seems that e2fsck has destroyed the filesystem! # mount /dev/sdb2 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sdb2, missing codepage or helper program, or other error. dmesg(1) may have more information after failed mount system call. Checking dmesg, I see that the mount has tried several possible filesystem types without success, including several lines like, "EXT4-fs (sdb2): VFS: Can't find ext4 filesystem". Explicitly adding "-t ext4" to the mount does not help. I've repeated this process, again getting success, including verification, from rpi-imager. This time I omitted the -c from the e2fsck command and was able to mount the partition after. So it appears that asking e2fsck to check for and mark bad blocks causes it to destroy the superblock(s). Is there another explanation? -- Dave Close, Compata, Irvine CA +1 714 434 7359 dave(a)compata.com dhclose(a)alumni.caltech.edu "Some ideas are so stupid that only intellectuals believe them." -- George Orwell

7 15

qemu-kvm viewer won't type
by ToddAndMargo 15 Mar '25

15 Mar '25

Hi All, If I do not have any activity in my virtual machine (does matter what OS) for a bit of time, say 30 minutes, the mouse works, but I can't type. Exiting the viewer and restarting it and happy camping returns. Is this just a bug or is it just some configuration? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Serious error. All shortcuts have disappeared. Screen. Mind. Both are blank. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1 0

Why is our Chromium not on VAAPI ...?
by lejeczek 14 Mar '25

14 Mar '25

or is it? Hi guys - do you know? Is Chromium's playback hw-accelerated some other way, is it accelerated at all? many thanks, L.

2 2

dnf downgrade dependencies
by Dave Close 14 Mar '25

14 Mar '25

I've decided I'm unhappy with one of the changes made by the most recent version of LibreOffice, 24.8, and I want to try going back to the previous version, 24.2, which is part of the FC40 repository. But I'm astounded by the result of the command below. (Without allowerasing the command won't do anything.) dnf downgrade --allowerasing --enable-repo=fedora40,updates40 \ libreoffice-24.2.2.1-3.fc40.x86_64 ... Transaction Summary: Installing: 21 packages Upgrading: 8 packages Replacing: 1169 packages Removing: 13 packages Downgrading: 1161 packages This is effectively returning to FC40, not just downgrading a single package. Of course, I didn't follow through. But somehow DNF thinks the following packages are dependent on LibreOffice: mplayer, opencv, python3-crypt-r, tesseract-libs, x264, among others! And it thinks the removal of these packages requires downgrading others, including mod-perl! I suppose I can simply download the older LibreOffice packages and then use rpm to replace them. But there could be some authentic library dependencies. Is there a better solution? -- Dave Close, Compata, Irvine CA "He who thinks with difficulty dave(a)compata.com, +1 714 434 7359 believes with alacrity." dhclose(a)alumni.caltech.edu -- Ambrose Bierce

3 3

Turning off current directory display in a terminal window
by Robert Moskowitz 13 Mar '25

13 Mar '25

How might I turn off (or change) the display of the current path in a terminal window? For example I have one terminal window with: rgm@LX140e-3:~/data/htt/Projects/Critical/drafts/draft-ietf-drip-rid/dki-try2$ That is the whole line is taken up with the current directory! I would be happy if only the lowest dir level is showing, e.g.: rgm@LX140e-3:dki-try2$ Or some such. But not to make a permanent behavior change, as MOST of the time, seeing where I am is helpful. thanks

11 23

Fresh install Fedora 41. Bootloader Problem. Camina Shell/Barry Scott/Samual Sieb/Jeffrey Walton/Tim. On Dell Inspiron 3721.
by Ger van Dijck 13 Mar '25

13 Mar '25

Hay all of You, Thanks for help and answering. The problem is simple . The fresh install of Fedora 41 no problem. The menu of the booatloader is the problem and I do understand this is kwown. (See mail Camina Shell) After the succesfull fresh install I get the bootmenu : First Kernel install version , so no second Kernel update,rescue mode and Windows choice possibility. So far so good. When rebooting the system no bootmenu : Just Fedora is booted no choice menu ; That is all. See below the BIOS settings on this machine. Boot mode is set to : UEFI with Legacy OPROM ; Secure boot : OFF Legacy Boot : Hard drive CD/DVD/CD-RW Drive Network UEFI Boot : Windows Boot Manager (CT1000BX500SSDI) Fedora Boot (CT1000BX500SSDI) You can understand the user can open the BIOS and made the choise Windows Boot or Fedora Boot but this a dangerous procedure and not very elegant. So the final question is : Where is GRUB ? And now , how farther ? Ger van Dijck.

5 9

getting core dump with grub2-mkconfig on systems with windows7 partitions??
by Michael D. Setzer II 13 Mar '25

13 Mar '25

Running the command see these lines? But line 186 in 50mounted-tests is just a "fi" line?? grub2-mkconfig -o /boot/grub2/grub.cfg Generating grub configuration file ... /usr/libexec/os-probes/50mounted-tests: line 186: 1820513 Segmentation fault (core dumped) grub2-mount "$partition" "$tmpmnt" 2> /dev/null /usr/libexec/os-probes/50mounted-tests: line 186: 1820535 Segmentation fault (core dumped) grub2-mount "$partition" "$tmpmnt" 2> /dev/null /usr/libexec/os-probes/50mounted-tests: line 186: 1820562 Segmentation fault (core dumped) grub2-mount "$partition" "$tmpmnt" 2> /dev/null Adding boot menu entry for UEFI Firmware Settings ... Noticed some grub updates in latest dnf updates +------------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor (Retired) mailto:mikes@guam.net mailto:msetzerii@gmail.com mailto:msetzerii@gmx.com Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +------------------------------------------------------------+

4 13

Controlling Chrome Save Dialog in Xephyr with xdotool
by Paul Smith 11 Mar '25

11 Mar '25

Dear All, I’m currently working with the following setup: I start Xephyr with: Xephyr :99 -screen 1920x1080 -ac -br -noreset & Then, I launch Openbox inside the Xephyr display: DISPLAY=:99 openbox & Inside Openbox, I open Chrome. When I try to save a page in Chrome using Ctrl + S, the save dialog window pops up as expected. However, I’m unable to interact with this dialog window using xdotool. It seems the dialog is not reachable or detectable by xdotool. Has anyone encountered this issue before? Is there a way to gain control of the Chrome save dialog window using xdotool or any alternative tool? Any advice or suggestions would be greatly appreciated! Thanks in advance, Paul

2 2

Re: Systemd Craziness
by Robert McBroom 10 Mar '25

10 Mar '25

On 3/9/25 2:06 PM, Zbigniew Jędrzejewski-Szmek wrote: > On Sun, Mar 09, 2025 at 06:45:24PM +0100, Michal Schorm wrote: >> Hi, >> >> this seems like a series of standalone issues caused by implementation >> of this F42 Change: >> https://fedoraproject.org/wiki/Changes/RPMSuportForSystemdSysusers >> >> Specifically for 'sphinx' it recently gained this commit: >> https://src.fedoraproject.org/rpms/sphinx/c/7e51c472a?branch=rawhide >> but it wasn't even built yet, nor merged to older releases than Rawhide. >> So I'm not sure what's going on there. >> >> I'm adding Zbyszek to CC, he is likely the most competent person to >> answer these behaviors related to that Change. > That is an error message from systemd-sysusers, when it writing a new > version of the groups file and copying existing groups. It looks like > the line for group 'input' is considered invalid for some reason. > > Please show your /etc/group. That doesn't sound good to me that /etc/group should be rewritten willy nilly. Not sure about putting /etc/group in public. The pertinent section seems to be clevis:x:997: input:x:996:root:rm3 kvm:x:36:qemu,root render:x:995: systemd-journal:x:190: systemd-coredump:x:994: systemd-network:x:192: systemd-resolve:x:193: dbus:x:81:

2 1

internal network
by Patrick Dupre 10 Mar '25

10 Mar '25

Hello, I have 2 PC A and B. Before A what connected to the world wireless and PC B was connected through an internet cable (wired). PC A lost its wireless connection. Now PC B is connected to the world through a telephone and I want to have PC A connected also through the same internet cable and access to the world. On PC A I activated Automatic DHCP and on PC B and the internet card 10.42.0.1 shared to other computers (IP) It connects inet 10.42.0.1 netmask 255.255.255.0 broadcast 10.42.0.255 but PC B cannot connect (connection fails) What am I doing wrong? Thank =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com ===========================================================================

8 26