users March 2025

users@lists.fedoraproject.org

62 participants
56 discussions

WWAN modem becomes unavailable after suspend
by Marco Moock 21 Mar '25

21 Mar '25

Hello! I have an HP lt4111. After suspend to ram, it only works every 2/3 times I suspend the system. It works if I suspend and wake it up again. It also works immediately after a reboot. If it doesn't work, it is being detected by lsusb, but not mmcli. Bus 001 Device 004: ID 03f0:4e1d HP, Inc HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module I also don't see dmesg messages that seem to be relevant to that. How can I further diagnose that? -- kind regards Marco

1 0

Strange Systemd Messages
by Stephen Morris 20 Mar '25

20 Mar '25

Hi, What do the following systemd messages mean, particularly the fstab ones about the specified address not being a device, particularly when the specified addresses have been mounted via fstab? [ 69.310393] systemd-fstab-generator[1889]: Checking was requested for "192.168.1.12:/mnt/HD/HD_a2", but it is not a device. [ 69.314850] systemd-sysv-generator[1899]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 69.314854] systemd-sysv-generator[1899]: Please update package to include a native systemd unit file. [ 69.314856] systemd-sysv-generator[1899]: ! This compatibility logic is deprecated, expect removal soon. ! [ 69.314881] systemd-sysv-generator[1899]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 69.314886] systemd-sysv-generator[1899]: Please update package to include a native systemd unit file. [ 69.314888] systemd-sysv-generator[1899]: ! This compatibility logic is deprecated, expect removal soon. ! [ 70.822449] systemd-fstab-generator[1889]: Checking was requested for "//192.168.1.12/Volume_1", but it is not a device. [ regards, Steve

4 8

Errors in DMESG After System Update
by Stephen Morris 19 Mar '25

19 Mar '25

Hi, Just a query first off, why do I need to run dmesg under sudo for it to produce its output? Could someone explain the systemd message below as to why they are coming out rather than the package being updated as specified in the message. The device non-existant errors and the lockd errors can be ignored as the device in question is my nas device which every so often seems to turn itself off logically rather than physically. Although having said this both the fstab nfs and cifs mount points for the device in question have actually been mounted. Is the nvidia API mismatch because the Xorg nvidia drivers were updated with the update I did and I haven't rebooted yet? Also could someone tell what I need to do to investigate the steam failure after the update, which I think updated libc. [ 2128.005544] lockd: server 192.168.1.12 not responding, still trying [ 2142.534787] systemd-sysv-generator[23295]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 2142.534792] systemd-sysv-generator[23295]: Please update package to include a native systemd unit file. [ 2142.534794] systemd-sysv-generator[23295]: ! This compatibility logic is deprecated, expect removal soon. ! [ 2142.534813] systemd-sysv-generator[23295]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 2142.534815] systemd-sysv-generator[23295]: Please update package to include a native systemd unit file. [ 2142.534817] systemd-sysv-generator[23295]: ! This compatibility logic is deprecated, expect removal soon. ! [ 2142.536593] systemd-fstab-generator[23284]: Checking was requested for "192.168.1.12:/mnt/HD/HD_a2", but it is not a device. [ 2142.539639] systemd-fstab-generator[23284]: Checking was requested for "//192.168.1.12/Volume_1", but it is not a device. [ 2144.206749] systemd-fstab-generator[23509]: Checking was requested for "192.168.1.12:/mnt/HD/HD_a2", but it is not a device. [ 2144.210249] systemd-sysv-generator[23520]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 2144.210254] systemd-sysv-generator[23520]: Please update package to include a native systemd unit file. [ 2144.210256] systemd-sysv-generator[23520]: ! This compatibility logic is deprecated, expect removal soon. ! [ 2144.210291] systemd-sysv-generator[23520]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 2144.210294] systemd-sysv-generator[23520]: Please update package to include a native systemd unit file. [ 2144.210296] systemd-sysv-generator[23520]: ! This compatibility logic is deprecated, expect removal soon. ! [ 2144.211598] systemd-fstab-generator[23509]: Checking was requested for "//192.168.1.12/Volume_1", but it is not a device. [ 2397.125803] lockd: server 192.168.1.12 OK [ 2465.414749] lockd: server 192.168.1.12 not responding, still trying [ 3055.581655] NVRM: API mismatch: the client has the version 570.124.04, but NVRM: this kernel module has the version 570.86.16. Please NVRM: make sure that this kernel module and all NVIDIA driver NVRM: components have the same version. [ 3055.633215] show_signal_msg: 9 callbacks suppressed [ 3055.633216] steam[32814]: segfault at 0 ip 00000000f7c6a503 sp 00000000ffab08a8 error 4 in libc.so.6[89503,f7be2000+160000] likely on CPU 1 (core 1, socket 0) regards, Steve

5 9

Re: Systemd Craziness
by Robert McBroom 18 Mar '25

18 Mar '25

On 3/10/25 4:20 AM, Zbigniew Jędrzejewski-Szmek wrote: > On Sun, Mar 09, 2025 at 04:34:35PM -0400, Robert McBroom wrote: >> On 3/9/25 2:06 PM, Zbigniew Jędrzejewski-Szmek wrote: >>> On Sun, Mar 09, 2025 at 06:45:24PM +0100, Michal Schorm wrote: >>>> Hi, >>>> >>>> this seems like a series of standalone issues caused by implementation >>>> of this F42 Change: >>>> https://fedoraproject.org/wiki/Changes/RPMSuportForSystemdSysusers >>>> >>>> Specifically for 'sphinx' it recently gained this commit: >>>> https://src.fedoraproject.org/rpms/sphinx/c/7e51c472a?branch=rawhide >>>> but it wasn't even built yet, nor merged to older releases than Rawhide. >>>> So I'm not sure what's going on there. >>>> >>>> I'm adding Zbyszek to CC, he is likely the most competent person to >>>> answer these behaviors related to that Change. >>> That is an error message from systemd-sysusers, when it writing a new >>> version of the groups file and copying existing groups. It looks like >>> the line for group 'input' is considered invalid for some reason. >>> >>> Please show your /etc/group. >> That doesn't sound good to me that /etc/group should be rewritten willy >> nilly. > It's not "willy nilly". Addition of the group was requested by the package, > which obviously means that the group file needs to be changed. > (And it's just a text file. So modifying the file means to rewrite it.) > >> Not sure about putting /etc/group in public. > I wouldn't have asked if it wasn't. There is very little private > information there. > >> The pertinent section seems to be >> >> input:x:996:root:rm3 > This line seems be be corrupted. > What does 'getent group input' say? > > Zbyszek ~# getent group input error writing group entry: Invalid argument Per Johnathon, replacing the colon with a comma ~# getent group input input:x:996:root,rm3 On another install group input has no users list. What should be there?

1 1

Would like to replace BIOS on Lenovo X131e running Fedora - should this work?
by Andre Robatino 16 Mar '25

16 Mar '25

I have a Lenovo X131e which is currently running an old BIOS from johnlewis.ie (4.0-6588-g4acd8ea-dirty, 09/04/2014). It was originally a Chromebook and I replaced the BIOS so there would be no danger of it automatically reinstalling Chrome. I see there is a Lenovo page at https://support.lenovo.com/us/en/downloads/ds029771-bios-update-utility-boo… with what appear to be BIOS updates from 2019 for the x131e, any machine type, but labeled as for Windows. Are other people using this already with Fedora? If I installed it using the Bootable CD image, any reason why the current Fedora-only install wouldn't continue to work? Just want to make sure since it's currently working okay and I just don't like the idea of having an old nonstandard BIOS installed.

4 13

e2fsck malfunction?
by Dave Close 16 Mar '25

16 Mar '25

I have been trying to create an SDcard to use with an Raspberry Pi. The card is created using the rpi-imager program on Fedora (41) and that program reports the creation as successful. Later, after mounting the ext4 partition on the card under Fedora and doing two or three minutes of exploration, I encounter a bad block. So I unmount the partition and use e2fsck to locate any bad blocks and mark them: e2fsck -y -c /dev/sdb2 But after that when I try to remount the partition, it seems that e2fsck has destroyed the filesystem! # mount /dev/sdb2 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sdb2, missing codepage or helper program, or other error. dmesg(1) may have more information after failed mount system call. Checking dmesg, I see that the mount has tried several possible filesystem types without success, including several lines like, "EXT4-fs (sdb2): VFS: Can't find ext4 filesystem". Explicitly adding "-t ext4" to the mount does not help. I've repeated this process, again getting success, including verification, from rpi-imager. This time I omitted the -c from the e2fsck command and was able to mount the partition after. So it appears that asking e2fsck to check for and mark bad blocks causes it to destroy the superblock(s). Is there another explanation? -- Dave Close, Compata, Irvine CA +1 714 434 7359 dave(a)compata.com dhclose(a)alumni.caltech.edu "Some ideas are so stupid that only intellectuals believe them." -- George Orwell

7 15

qemu-kvm viewer won't type
by ToddAndMargo 15 Mar '25

15 Mar '25

Hi All, If I do not have any activity in my virtual machine (does matter what OS) for a bit of time, say 30 minutes, the mouse works, but I can't type. Exiting the viewer and restarting it and happy camping returns. Is this just a bug or is it just some configuration? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Serious error. All shortcuts have disappeared. Screen. Mind. Both are blank. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1 0

Why is our Chromium not on VAAPI ...?
by lejeczek 14 Mar '25

14 Mar '25

or is it? Hi guys - do you know? Is Chromium's playback hw-accelerated some other way, is it accelerated at all? many thanks, L.

2 2

dnf downgrade dependencies
by Dave Close 14 Mar '25

14 Mar '25

I've decided I'm unhappy with one of the changes made by the most recent version of LibreOffice, 24.8, and I want to try going back to the previous version, 24.2, which is part of the FC40 repository. But I'm astounded by the result of the command below. (Without allowerasing the command won't do anything.) dnf downgrade --allowerasing --enable-repo=fedora40,updates40 \ libreoffice-24.2.2.1-3.fc40.x86_64 ... Transaction Summary: Installing: 21 packages Upgrading: 8 packages Replacing: 1169 packages Removing: 13 packages Downgrading: 1161 packages This is effectively returning to FC40, not just downgrading a single package. Of course, I didn't follow through. But somehow DNF thinks the following packages are dependent on LibreOffice: mplayer, opencv, python3-crypt-r, tesseract-libs, x264, among others! And it thinks the removal of these packages requires downgrading others, including mod-perl! I suppose I can simply download the older LibreOffice packages and then use rpm to replace them. But there could be some authentic library dependencies. Is there a better solution? -- Dave Close, Compata, Irvine CA "He who thinks with difficulty dave(a)compata.com, +1 714 434 7359 believes with alacrity." dhclose(a)alumni.caltech.edu -- Ambrose Bierce

3 3

Turning off current directory display in a terminal window
by Robert Moskowitz 13 Mar '25

13 Mar '25

How might I turn off (or change) the display of the current path in a terminal window? For example I have one terminal window with: rgm@LX140e-3:~/data/htt/Projects/Critical/drafts/draft-ietf-drip-rid/dki-try2$ That is the whole line is taken up with the current directory! I would be happy if only the lowest dir level is showing, e.g.: rgm@LX140e-3:dki-try2$ Or some such. But not to make a permanent behavior change, as MOST of the time, seeing where I am is helpful. thanks

11 23

Fresh install Fedora 41. Bootloader Problem. Camina Shell/Barry Scott/Samual Sieb/Jeffrey Walton/Tim. On Dell Inspiron 3721.
by Ger van Dijck 13 Mar '25

13 Mar '25

Hay all of You, Thanks for help and answering. The problem is simple . The fresh install of Fedora 41 no problem. The menu of the booatloader is the problem and I do understand this is kwown. (See mail Camina Shell) After the succesfull fresh install I get the bootmenu : First Kernel install version , so no second Kernel update,rescue mode and Windows choice possibility. So far so good. When rebooting the system no bootmenu : Just Fedora is booted no choice menu ; That is all. See below the BIOS settings on this machine. Boot mode is set to : UEFI with Legacy OPROM ; Secure boot : OFF Legacy Boot : Hard drive CD/DVD/CD-RW Drive Network UEFI Boot : Windows Boot Manager (CT1000BX500SSDI) Fedora Boot (CT1000BX500SSDI) You can understand the user can open the BIOS and made the choise Windows Boot or Fedora Boot but this a dangerous procedure and not very elegant. So the final question is : Where is GRUB ? And now , how farther ? Ger van Dijck.

5 9

getting core dump with grub2-mkconfig on systems with windows7 partitions??
by Michael D. Setzer II 13 Mar '25

13 Mar '25

Running the command see these lines? But line 186 in 50mounted-tests is just a "fi" line?? grub2-mkconfig -o /boot/grub2/grub.cfg Generating grub configuration file ... /usr/libexec/os-probes/50mounted-tests: line 186: 1820513 Segmentation fault (core dumped) grub2-mount "$partition" "$tmpmnt" 2> /dev/null /usr/libexec/os-probes/50mounted-tests: line 186: 1820535 Segmentation fault (core dumped) grub2-mount "$partition" "$tmpmnt" 2> /dev/null /usr/libexec/os-probes/50mounted-tests: line 186: 1820562 Segmentation fault (core dumped) grub2-mount "$partition" "$tmpmnt" 2> /dev/null Adding boot menu entry for UEFI Firmware Settings ... Noticed some grub updates in latest dnf updates +------------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor (Retired) mailto:mikes@guam.net mailto:msetzerii@gmail.com mailto:msetzerii@gmx.com Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +------------------------------------------------------------+

4 13

Controlling Chrome Save Dialog in Xephyr with xdotool
by Paul Smith 11 Mar '25

11 Mar '25

Dear All, I’m currently working with the following setup: I start Xephyr with: Xephyr :99 -screen 1920x1080 -ac -br -noreset & Then, I launch Openbox inside the Xephyr display: DISPLAY=:99 openbox & Inside Openbox, I open Chrome. When I try to save a page in Chrome using Ctrl + S, the save dialog window pops up as expected. However, I’m unable to interact with this dialog window using xdotool. It seems the dialog is not reachable or detectable by xdotool. Has anyone encountered this issue before? Is there a way to gain control of the Chrome save dialog window using xdotool or any alternative tool? Any advice or suggestions would be greatly appreciated! Thanks in advance, Paul

2 2

Re: Systemd Craziness
by Robert McBroom 10 Mar '25

10 Mar '25

On 3/9/25 2:06 PM, Zbigniew Jędrzejewski-Szmek wrote: > On Sun, Mar 09, 2025 at 06:45:24PM +0100, Michal Schorm wrote: >> Hi, >> >> this seems like a series of standalone issues caused by implementation >> of this F42 Change: >> https://fedoraproject.org/wiki/Changes/RPMSuportForSystemdSysusers >> >> Specifically for 'sphinx' it recently gained this commit: >> https://src.fedoraproject.org/rpms/sphinx/c/7e51c472a?branch=rawhide >> but it wasn't even built yet, nor merged to older releases than Rawhide. >> So I'm not sure what's going on there. >> >> I'm adding Zbyszek to CC, he is likely the most competent person to >> answer these behaviors related to that Change. > That is an error message from systemd-sysusers, when it writing a new > version of the groups file and copying existing groups. It looks like > the line for group 'input' is considered invalid for some reason. > > Please show your /etc/group. That doesn't sound good to me that /etc/group should be rewritten willy nilly. Not sure about putting /etc/group in public. The pertinent section seems to be clevis:x:997: input:x:996:root:rm3 kvm:x:36:qemu,root render:x:995: systemd-journal:x:190: systemd-coredump:x:994: systemd-network:x:192: systemd-resolve:x:193: dbus:x:81:

2 1

internal network
by Patrick Dupre 10 Mar '25

10 Mar '25

Hello, I have 2 PC A and B. Before A what connected to the world wireless and PC B was connected through an internet cable (wired). PC A lost its wireless connection. Now PC B is connected to the world through a telephone and I want to have PC A connected also through the same internet cable and access to the world. On PC A I activated Automatic DHCP and on PC B and the internet card 10.42.0.1 shared to other computers (IP) It connects inet 10.42.0.1 netmask 255.255.255.0 broadcast 10.42.0.255 but PC B cannot connect (connection fails) What am I doing wrong? Thank =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com ===========================================================================

8 26

Systemd Craziness
by Robert McBroom 09 Mar '25

09 Mar '25

Updating f41 ends with messages. >>> Running trigger-install scriptlet: systemd-0:256.12-1.fc41.x86_64 >>> Finished trigger-install scriptlet: systemd-0:256.12-1.fc41.x86_64 >>> Scriptlet output: >>> Creating group 'passim' with GID 990. >>> Creating user 'passim' (Local Caching Server) with UID 990 and GID 990. >>> Failed to add existing group "input" to temporary group file: Invalid argument >>> >>> Running trigger-install scriptlet: systemd-0:256.12-1.fc41.x86_64 >>> Finished trigger-install scriptlet: systemd-0:256.12-1.fc41.x86_64 >>> Scriptlet output: >>> /usr/lib/tmpfiles.d/sphinx.conf:1: Failed to resolve user 'sphinx': No such process >>> Not the first time to see this What is this sequence trying to do?

2 1

F41 Firefox migration
by Robert Moskowitz 08 Mar '25

08 Mar '25

I followed the process of copying my whole .mozilla hidden folder (after first renaming the one created by firefox) from my old F38 system to my new F41 system. Seems to work. Probably brought along all sorts of old cruft that might have been better lost. One problem though. On starting Firefox after installing the new .mozilla folder, I got a page opened: https://www.mozilla.org/en-US/firefox/welcome/25/ Warning me that Firefox will BREAK on Mar 14, 2025 due to expiring certs. Will this be fixed automagically on a Firefox update or is there some specific file(s) to copy from that renamed .mozilla folder? thanks

4 9

Replacing nano with vim - logout needed?
by Robert Moskowitz 08 Mar '25

08 Mar '25

I ran: dnf install vim-default-editor --allowerasing But I am still getting nano when I try to "crontab -e" Do I have to logout and back in for this change to take? Or is there an easier way?

8 13

MATE desktop not offered by Fedora 42 greeter
by Robert Nichols 07 Mar '25

07 Mar '25

In my newly upgraded Fedora 42 VM, the greeter offers me only "GNOME" and "GNOME Classic" even though dnf reports: Package "mate-desktop-1.28.2-4.fc42.x86_64" is already installed. I tried reinstalling mate-desktop, but that did not help. How can I get MATE desktop to work? -- Bob Nichols "NOSPAM" is really part of my email address. Do NOT delete it.

3 3

[Test Day] Fedora 42 i18n Test Week 2025-03-04
by Sumantro Mukherjee 06 Mar '25

06 Mar '25

Hello All, Fedora QA and i18n team is hosting a Fedora Test Week to test the i18n features in Fedora 42. This is nice opportunity for anyone interested in i18n or in general to get started with contributing to Fedora Project. If you are interested, please make the note of the following : Wiki page , gives off information about the people , features and pre req about the test day. It can be found here [0] The results app helps testers to submit their results and report bugs if any! It can be found here[1] If you are absolutely new , this magazine article talks about the test week[2] [0] http://fedoraproject.org/wiki/Test_Day:2025-03-04_I18N_Test_Day [1] https://testdays.fedoraproject.org/events/210 [2] https://fedoramagazine.org/contribute-at-the-fedora-linux-42-i18n-test-week/

2 1

Re: what kind of raid is this?
by Bob Marčan 06 Mar '25

06 Mar '25

On Wed, 05 Mar 2025 22:05:13 -0800 "ToddAndMargo via users" <users(a)lists.fedoraproject.org> wrote: > On 3/5/25 9:05 PM, Jeffrey Walton wrote: > > On Wed, Mar 5, 2025 at 9:12 PM ToddAndMargo via users > > <users(a)lists.fedoraproject.org> wrote: > >> > >> On 3/5/25 5:45 PM, Bob Marčan via users wrote: > >>>> /dev/md126: > >>>> Container : /dev/md/imsm0, member 0 > >>>> Raid Level : raid1 > >>> ^^^ > >> > >> Not following you. > > > > He answered your question. You have RAID1. It is also called Disk Mirroring. > > > > Jeff > > > Hi Jeff, > > The question was what type of raid, not what level. > From my original post: > > Raid Level : raid1 > > Is this RSTe? Software raid handled by the OS? > Or something else? > > -T The information you sent, at least to me, does not disclose whether it is SW or Fake Raid. Try to connect this disk to a Linux machine and look there what can be seen there. I would do that myself.

7 9

what kind of raid is this?
by ToddAndMargo 06 Mar '25

06 Mar '25

Hi All, Well, the 11 year old server came down around the customer'w ears. The motherboard went south. Got a new server on the way. The hard drives are healthy (raid1). But can I mount one of the as a second drive to see data in the new server? Now this is embarrassing. I forgot what kind of raid1 I used. RSTe maybe? Here is the print out I received from the raid checking program I wrote that I fire off every month: /dev/md126: Container : /dev/md/imsm0, member 0 Raid Level : raid1 Array Size : 890763264 (849.50 GiB 912.14 GB) Used Dev Size : 890763264 (849.50 GiB 912.14 GB) Raid Devices : 2 Total Devices : 2 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Consistency Policy : resync UUID : 187c7c9f:6b186a73:2a0d4038:7c44c37a Number Major Minor RaidDevice State 1 8 0 0 active sync /dev/sda 0 8 16 1 active sync /dev/sdb What kind of raid is this? Many thanks, -T

5 7

/var/cache/dnf
by Felix Miata 06 Mar '25

06 Mar '25

I have multiple F41 installations system-upgraded from F40, upgraded from F39, etc., and a few of F42 from F41. Now with DNF5 operational, is there any reason in F41+ for /var/cache/dnf/ to continue to exist? It has multiple files of considerable size. -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

3 3

Fresh install Fedora 41 on Dell Inspiron 3721.
by Ger van Dijck 06 Mar '25

06 Mar '25

Hay All, On my Dell Inspiron 3721 I had a crash : HD drive defect. So i installed a SSD drive (1TB) and decided to convert from MBR to GPT. I did a fresh install of Windows 10 Professionel : No problem ; Runs fine. Then I did an attempt to a fresh install of Fedora 41 by a netinstall .ISO on DVD: Not succesfull. So I did a retry with the Mediawriter : Not succesfull. When running the test and install on both media I get the following messages : ipi:dmi :Base adress is zero , assuming no IPMI interface. ACPI Bios error (bug) Could not resolve symbol [ \_SB.PC10.GFX0.DD02_BCL1, AE_not_found (20240322/psargs-332). ACPI Error : Aborting method \_SB.PC10.PEG0.PEGP.DD02_BCL due to previous error (AE_not_found) (202w40322 /psparse-529). Additional message when testing the install with Netinstall .ISO on DVD : Fragment count zero , Supported iso no. When I try to install with the Mediawriter the proces is aborted , when doing with the Netinstall .ISO on DVD Fedora 41 can be installed but there is no bootloader , but in the BIOS there are two bootfiles. So I can go in the BIOS and change the boot options in boot Windows or boot Fedora. and both OSses run fine. Any help would be usefull , kind regards , Ger van Dijck.

5 4

Gnome Videos - No valid frames decoded before end of stream for AV1
by lejeczek 05 Mar '25

05 Mar '25

Hi guys. I get that when viewing an AV1 file's properties in Gnome's Files - Gnome Video would not playback such a file. I am asking here for I wonder if this is Gnome-specific issue for... other popular media players, in Fedora, play such file just fine. Or, perhaps it's OBS issue when records into AV1 ? I've tried both FFmpeg VAAPI and QuickSync for video encoder, which result in the same issue. many thanks, L.

1 0