Il 23/05/2016 22:56, stan ha scritto:
On Mon, 23 May 2016 16:02:35 +0200 gil puntogil@libero.it wrote:
Are they turned on in pulse? Install pavucontrol if it isn't already installed, and fire it up. Look at the default device. Is it the device you want to have as default, the AMD card, and not the hdmi device?
So, if you set the AMD card as your default in pavucontrol, your problem should be solved.
tried, do not resolve the problem, mybe with gnome or other DE work ...
What if you turn off the amd card in pavucontrol? (Last tab)
Then run aplay -D plughw:[card number],0 some_wav_file.wav
Pulse no longer controls this device, so it is strictly alsa. The -D is telling it which device number to use, use the number from the aplay -l command. It has to be a wav file since aplay doesn't know about compressed formats unless you add some other options.
Does it play? If it does, alsa is working, and you only have a pulse configuration issue.
$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0
$ aplay -D plughw:0,0 /usr/share/sounds/purple/alert.wav Playing WAVE '/usr/share/sounds/purple/alert.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono $ aplay -D plughw:0,1 /usr/share/sounds/purple/alert.wav Playing WAVE '/usr/share/sounds/purple/alert.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono $ aplay -D plughw:1,3 /usr/share/sounds/purple/alert.wav Playing WAVE '/usr/share/sounds/purple/alert.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono $ aplay -D plughw:1,7 /usr/share/sounds/purple/alert.wav Playing WAVE '/usr/share/sounds/purple/alert.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono
sorry for the "noise" .g
If it doesn't, alsa isn't working, and that would explain why pulse isn't working, since pulse depends on alsa under the covers. Are your speakers plugged in? Is the volume turned up? I know, obvious things, but sometimes those are the things that bite.
The other thing is that each time that the computer boots, devices are loaded in random order, unless you put a file in /etc/modprobe.d. I use the name soundcard.conf for the file, and this is what I have in it. You should be able to modify this for your needs.
tried, adding "options snd_hda_intel index=0 model=auto" ... but do not work
It's been a long time since I messed with this, so I've forgotten the arcane syntax. You could try the alsa-user mailing list. Since you have two hda-intel cards, you need to differentiate between them somehow, so you are telling alsa that the amd card always goes in slot 0. They might be able to tell you how. Your command above will accept either the amd or hdmi for slot 0, since they are both hda-intel. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: http://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org